libstdc++-v3 INSTALL

The latest version of this document is always available at http://gcc.gnu.org/onlinedocs/libstdc++/install.html.

To the libstdc++-v3 homepage.

Contents

Tools you will need beforehand

You will need a recent version of g++ to compile the snapshot of libstdc++, such as one of the GCC 3.x snapshots (insert standard caveat about using snapshots rather than formal releases). You will need the full source distribution to whatever compiler release you are using. The GCC snapshots can be had from one of the sites on their mirror list. If you are using a 2.x compiler, see the status page first.

In addition, if you plan to modify the makefiles or regenerate the configure scripts you'll need recent versions of the GNU Autotools: autoconf (version 2.50 or later), automake (version 1.4 or later), and libtool (multilanguage, version 1.4 or later), in order to rebuild the files. These tools are all required to be installed in the same location (most linux distributions install these tools by default, so no worries as long as the versions are correct).

To test your build, you will need either DejaGNU 1.4 (to run 'make check' like the rest of GCC), or Bash 2.x (to run 'make check-script').

As of June 19, 2000, libstdc++ attempts to use tricky and space-saving features of the GNU toolchain, enabled with -ffunction-sections -fdata-sections -Wl,--gc-sections. To obtain maximum benefit from this, binutils after this date should also be used (bugs were fixed with C++ exception handling related to this change in libstdc++-v3). The version of these tools should be 2.10.90, or later, and you can get snapshots (as well as releases) of binutils here. The configure process will automatically detect and use these features if the underlying support is present.

If you are using a 3.1-series libstdc++ snapshot, then the requirements are slightly more stringent: the compiler sources must also be 3.1 or later (for both technical and licensing reasons), and your binutils must be 2.11.95 or later if you want to use symbol versioning in shared libraries. Again, the configure process will automatically detect and use these features if the underlying support is present.

Finally, a few system-specific requirements:

linux
If you are using gcc 3.1 or later on linux, and are using the gnu locale model (enabled by default for sufficient versions of glibc), the following locales are used and tested in the libstdc++ testsuites: en_HK, en_US, fr_FR, fr_FR@euro, de_DE, de_DE@euro, ja_JP.eucjp, and it_IT. Failure to have the underlying "C" library locale information installed will mean that C++ named locales for the above regions will not work: because of this, the libstdc++ testsuite will not pass the named locale tests. If this isn't an issue, don't worry about it. If named locales are needed, the underlying locale information must be installed. Note that rebuilding libstdc++ after locales are installed is not necessary.

To install support for locales, do only one of the following:

Setting up the source directories

The following definitions will be used throughout the rest of this document:

Note:

  1. The 3.0 version and following are intended to replace the library that comes with the compiler, so libsrcdir and libbuilddir must be contained under gccsrcdir and gccbuilddir, respectively.
  2. The source, build, and installation directories should not be parents of one another; i.e., these should all be separate directories. Please don't build out of the source directory.

Check out or download the GCC sources: the resulting source directory (gcc or gcc-3.0.3, for example) is gccsrcdir. Once in gccsrcdir, you'll need to rename or delete the libstdc++-v3 directory which comes with that snapshot: 

   mv libstdc++-v3 libstdc++-v3-previous  [OR]
   rm -r libstdc++-v3

Next, unpack the libstdc++-v3 library tarball into this gccsrcdir directory; it will create a libsrcdir called libstdc++-version: 

   gzip -dc libstdc++-version.tar.gz | tar xf -

Finally, rename libsrcdir to libstdc++-v3 so that gcc's configure flags will be able to deal with the new library. 

   mv libsrcdir libstdc++-v3

Configuring

If you have never done this before, you should read the basic GCC Installation Instructions first. Read all of them. Twice.

When building libstdc++-v3 you'll have to configure the entire gccsrcdir directory. The full list of libstdc++-v3 specific configuration options, not dependent on the specific compiler release being used, can be found here.

Consider possibly using --enable-languages=c++ to save time by only building the C++ language parts. 

   cd gccbuilddir
   gccsrcdir/configure --prefix=destdir --other-opts...

Building and installing the library

Now you have a few options:

[re]building everything

If you're building GCC from scratch, you can do the usual 'make bootstrap' here, and libstdc++-v3 will be built as its default C++ library. The generated g++ will magically use the correct headers, link against the correct library binary, and in general using libstdc++-v3 will be a piece of cake. You're done; run 'make install' (see the GCC installation instructions) to put the new compiler and libraries into place.

[re]building only libstdc++

To rebuild just libstdc++, use: 

   make all-target-libstdc++-v3

This will configure and build the C++ library in the gccbuilddir/cpu-vendor-os/libstdc++ directory.

If you are rebuilding from a previous build [attempt], some information is kept in a cache file. This is stored in gccbuilddir/cpu-vendor-os/ if you are building with multilibs (the default), or in gccbuilddir/cpu-vendor-os/libstdc++-v3 if you have multilibs disabled. The filename is config.cache; if previous information is causing problems, you can delete it entirely, or simply edit it and remove lines.

You're done. Now install the rebuilt pieces with

   make install

or

   make install-gcc
   make install-target-libstdc++-v3

Post-installation

Installation will create the destdir directory and populate it with subdirectories: 

   lib/
   include/g++-v3/
      backward/
      bits/
      cpu-vendor-os/bits/
      ext/

If you used the version-specific-libs configure option, then most of the headers and library files will be moved under lib/gcc-lib/ instead.

You can check the status of the build without installing it using

   make check

or you can check the status of the installed library using

   make check-install

in the libbuilddir directory. These commands will create a 'testsuite' directory underneath libbuilddir containing the results of the tests. We are interested in any strange failures of the testsuite; please see FAQ 2.4 for which files to examine.

Using the library

Find the new library at runtime (shared linking only)

If you only built a static library (libstdc++.a), or if you specified static linking, you don't have to worry about this. But if you built a shared library (libstdc++.so) and linked against it, then you will need to find that library when you run the executable.

Methods vary for different platforms and different styles, but the usual ones are printed to the screen during installation. They include:

Use the ldd(1) utility to show which library the system thinks it will get at runtime.

A libstdc++.la file is also installed, for use with Libtool. If you use Libtool to create your executables, these details are taken care of for you.

See license.html for copying conditions. Comments and suggestions are welcome, and may be sent to the libstdc++ mailing list.