/* Copyright (C) 2000, 2001, 2003, 2004, 2005, 2006, 2009, 2011 Free Software Foundation, Inc. This file was pretty much copied from newlib. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. Under Section 7 of GPL version 3, you are granted additional permissions described in the GCC Runtime Library Exception, version 3.1, as published by the Free Software Foundation. You should have received a copy of the GNU General Public License and a copy of the GCC Runtime Library Exception along with this program; see the files COPYING3 and COPYING.RUNTIME respectively. If not, see . */ #ifdef MMU_SUPPORT /* Section used for exception/timer interrupt stack area */ .section .data.vbr.stack,"aw" .align 4 .global __ST_VBR __ST_VBR: .zero 1024 * 2 /* ; 2k for VBR handlers */ /* Label at the highest stack address where the stack grows from */ __timer_stack: #endif /* MMU_SUPPORT */ /* ;---------------------------------------- Normal newlib crt1.S */ #ifdef __SH5__ .section .data,"aw" .global ___data ___data: .section .rodata,"a" .global ___rodata ___rodata: #define ICCR_BASE 0x01600000 #define OCCR_BASE 0x01e00000 #define MMUIR_BASE 0x00000000 #define MMUDR_BASE 0x00800000 #define PTE_ENABLED 1 #define PTE_DISABLED 0 #define PTE_SHARED (1 << 1) #define PTE_NOT_SHARED 0 #define PTE_CB_UNCACHEABLE 0 #define PTE_CB_DEVICE 1 #define PTE_CB_CACHEABLE_WB 2 #define PTE_CB_CACHEABLE_WT 3 #define PTE_SZ_4KB (0 << 3) #define PTE_SZ_64KB (1 << 3) #define PTE_SZ_1MB (2 << 3) #define PTE_SZ_512MB (3 << 3) #define PTE_PRR (1 << 6) #define PTE_PRX (1 << 7) #define PTE_PRW (1 << 8) #define PTE_PRU (1 << 9) #define SR_MMU_BIT 31 #define SR_BL_BIT 28 #define ALIGN_4KB (0xfff) #define ALIGN_1MB (0xfffff) #define ALIGN_512MB (0x1fffffff) #define DYNACON_BASE 0x0f000000 #define DM_CB_DLINK_BASE 0x0c000000 #define DM_DB_DLINK_BASE 0x0b000000 #define FEMI_AREA_0 0x00000000 #define FEMI_AREA_1 0x04000000 #define FEMI_AREA_2 0x05000000 #define FEMI_AREA_3 0x06000000 #define FEMI_AREA_4 0x07000000 #define FEMI_CB 0x08000000 #define EMI_BASE 0X80000000 #define DMA_BASE 0X0e000000 #define CPU_BASE 0X0d000000 #define PERIPH_BASE 0X09000000 #define DMAC_BASE 0x0e000000 #define INTC_BASE 0x0a000000 #define CPRC_BASE 0x0a010000 #define TMU_BASE 0x0a020000 #define SCIF_BASE 0x0a030000 #define RTC_BASE 0x0a040000 #define LOAD_CONST32(val, reg) \ movi ((val) >> 16) & 65535, reg; \ shori (val) & 65535, reg #define LOAD_PTEH_VAL(sym, align, bits, scratch_reg, reg) \ LOAD_ADDR (sym, reg); \ LOAD_CONST32 ((align), scratch_reg); \ andc reg, scratch_reg, reg; \ LOAD_CONST32 ((bits), scratch_reg); \ or reg, scratch_reg, reg #define LOAD_PTEL_VAL(sym, align, bits, scratch_reg, reg) \ LOAD_ADDR (sym, reg); \ LOAD_CONST32 ((align), scratch_reg); \ andc reg, scratch_reg, reg; \ LOAD_CONST32 ((bits), scratch_reg); \ or reg, scratch_reg, reg #define SET_PTE(pte_addr_reg, pteh_val_reg, ptel_val_reg) \ putcfg pte_addr_reg, 0, r63; \ putcfg pte_addr_reg, 1, ptel_val_reg; \ putcfg pte_addr_reg, 0, pteh_val_reg #if __SH5__ == 64 .section .text,"ax" #define LOAD_ADDR(sym, reg) \ movi (sym >> 48) & 65535, reg; \ shori (sym >> 32) & 65535, reg; \ shori (sym >> 16) & 65535, reg; \ shori sym & 65535, reg #else .mode SHmedia .section .text..SHmedia32,"ax" #define LOAD_ADDR(sym, reg) \ movi (sym >> 16) & 65535, reg; \ shori sym & 65535, reg #endif .global start start: LOAD_ADDR (_stack, r15) #ifdef MMU_SUPPORT ! Set up the VM using the MMU and caches ! .vm_ep is first instruction to execute ! after VM initialization pt/l .vm_ep, tr1 ! Configure instruction cache (ICCR) movi 3, r2 movi 0, r3 LOAD_ADDR (ICCR_BASE, r1) putcfg r1, 0, r2 putcfg r1, 1, r3 ! movi 7, r2 ! write through ! Configure operand cache (OCCR) LOAD_ADDR (OCCR_BASE, r1) putcfg r1, 0, r2 putcfg r1, 1, r3 ! Disable all PTE translations LOAD_ADDR (MMUIR_BASE, r1) LOAD_ADDR (MMUDR_BASE, r2) movi 64, r3 pt/l .disable_ptes_loop, tr0 .disable_ptes_loop: putcfg r1, 0, r63 putcfg r2, 0, r63 addi r1, 16, r1 addi r2, 16, r2 addi r3, -1, r3 bgt r3, r63, tr0 LOAD_ADDR (MMUIR_BASE, r1) ! FEMI instruction mappings ! Area 0 - 1Mb cacheable at 0x00000000 ! Area 1 - None ! Area 2 - 1Mb cacheable at 0x05000000 ! - 1Mb cacheable at 0x05100000 ! Area 3 - None ! Area 4 - None ! Map a 1Mb page for instructions at 0x00000000 LOAD_PTEH_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRX | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1Mb page for instructions at 0x05000000 addi r1, 16, r1 LOAD_PTEH_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRX | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1Mb page for instructions at 0x05100000 addi r1, 16, r1 LOAD_PTEH_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRX | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 512M page for instructions at EMI base addi r1, 16, r1 LOAD_PTEH_VAL (EMI_BASE, ALIGN_512MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (EMI_BASE, ALIGN_512MB, PTE_CB_CACHEABLE_WB | PTE_SZ_512MB | PTE_PRX | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for instructions at DM_DB_DLINK_BASE addi r1, 16, r1 LOAD_PTEH_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_CB_CACHEABLE_WB | PTE_SZ_4KB | PTE_PRX | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) LOAD_ADDR (MMUDR_BASE, r1) ! FEMI data mappings ! Area 0 - 1Mb cacheable at 0x00000000 ! Area 1 - 1Mb device at 0x04000000 ! Area 2 - 1Mb cacheable at 0x05000000 ! - 1Mb cacheable at 0x05100000 ! Area 3 - None ! Area 4 - None ! CB - 1Mb device at 0x08000000 ! Map a 1Mb page for data at 0x00000000 LOAD_PTEH_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1Mb page for data at 0x04000000 addi r1, 16, r1 LOAD_PTEH_VAL (FEMI_AREA_1, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (FEMI_AREA_1, ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1Mb page for data at 0x05000000 addi r1, 16, r1 LOAD_PTEH_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1Mb page for data at 0x05100000 addi r1, 16, r1 LOAD_PTEH_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for registers at 0x08000000 addi r1, 16, r1 LOAD_PTEH_VAL (FEMI_CB, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (FEMI_CB, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 512M page for data at EMI addi r1, 16, r1 LOAD_PTEH_VAL (EMI_BASE, ALIGN_512MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (EMI_BASE, ALIGN_512MB, PTE_CB_CACHEABLE_WB | PTE_SZ_512MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for DYNACON at DYNACON_BASE addi r1, 16, r1 LOAD_PTEH_VAL (DYNACON_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (DYNACON_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for instructions at DM_DB_DLINK_BASE addi r1, 16, r1 LOAD_PTEH_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_CB_CACHEABLE_WB | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for data at DM_DB_DLINK_BASE+0x1000 addi r1, 16, r1 LOAD_PTEH_VAL ((DM_DB_DLINK_BASE+0x1000), ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((DM_DB_DLINK_BASE+0x1000), ALIGN_4KB, PTE_CB_UNCACHEABLE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for stack DM_DB_DLINK_BASE+0x2000 addi r1, 16, r1 LOAD_PTEH_VAL ((DM_DB_DLINK_BASE+0x2000), ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((DM_DB_DLINK_BASE+0x2000), ALIGN_4KB, PTE_CB_CACHEABLE_WB | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK ! 0x0c000000 - 0x0c0fffff addi r1, 16, r1 LOAD_PTEH_VAL (DM_CB_DLINK_BASE, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (DM_CB_DLINK_BASE, ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK ! 0x0c100000 - 0x0c1fffff addi r1, 16, r1 LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x100000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK ! 0x0c200000 - 0x0c2fffff addi r1, 16, r1 LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x200000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x200000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK ! 0x0c400000 - 0x0c4fffff addi r1, 16, r1 LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x400000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x400000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK ! 0x0c800000 - 0x0c8fffff addi r1, 16, r1 LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x800000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x800000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map a 4K page for DMA control registers addi r1, 16, r1 LOAD_PTEH_VAL (DMA_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (DMA_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map lots of 4K pages for peripherals ! /* peripheral */ addi r1, 16, r1 LOAD_PTEH_VAL (PERIPH_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (PERIPH_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! /* dmac */ addi r1, 16, r1 LOAD_PTEH_VAL (DMAC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (DMAC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! /* intc */ addi r1, 16, r1 LOAD_PTEH_VAL (INTC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (INTC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! /* rtc */ addi r1, 16, r1 LOAD_PTEH_VAL (RTC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (RTC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! /* dmac */ addi r1, 16, r1 LOAD_PTEH_VAL (TMU_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (TMU_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! /* scif */ addi r1, 16, r1 LOAD_PTEH_VAL (SCIF_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (SCIF_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! /* cprc */ addi r1, 16, r1 LOAD_PTEH_VAL (CPRC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (CPRC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Map CPU WPC registers addi r1, 16, r1 LOAD_PTEH_VAL (CPU_BASE, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL (CPU_BASE, ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) addi r1, 16, r1 LOAD_PTEH_VAL ((CPU_BASE+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((CPU_BASE+0x100000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) addi r1, 16, r1 LOAD_PTEH_VAL ((CPU_BASE+0x200000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((CPU_BASE+0x200000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) addi r1, 16, r1 LOAD_PTEH_VAL ((CPU_BASE+0x400000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2) LOAD_PTEL_VAL ((CPU_BASE+0x400000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3) SET_PTE (r1, r2, r3) ! Switch over to virtual addressing and enabled cache getcon sr, r1 movi 1, r2 shlli r2, SR_BL_BIT, r2 or r1, r2, r1 putcon r1, ssr getcon sr, r1 movi 1, r2 shlli r2, SR_MMU_BIT, r2 or r1, r2, r1 putcon r1, ssr gettr tr1, r1 putcon r1, spc synco rte ! VM entry point. From now on, we are in VM mode. .vm_ep: ! Install the trap handler, by seeding vbr with the ! correct value, and by assigning sr.bl = 0. LOAD_ADDR (vbr_start, r1) putcon r1, vbr movi ~(1<<28), r1 getcon sr, r2 and r1, r2, r2 putcon r2, sr #endif /* MMU_SUPPORT */ pt/l .Lzero_bss_loop, tr0 pt/l _init, tr5 pt/l ___setup_argv_and_call_main, tr6 pt/l _exit, tr7 ! zero out bss LOAD_ADDR (_edata, r0) LOAD_ADDR (_end, r1) .Lzero_bss_loop: stx.q r0, r63, r63 addi r0, 8, r0 bgt/l r1, r0, tr0 LOAD_ADDR (___data, r26) LOAD_ADDR (___rodata, r27) #ifdef __SH_FPU_ANY__ getcon sr, r0 ! enable the FP unit, by resetting SR.FD ! also zero out SR.FR, SR.SZ and SR.PR, as mandated by the ABI movi 0, r1 shori 0xf000, r1 andc r0, r1, r0 putcon r0, sr #if __SH5__ == 32 pt/l ___set_fpscr, tr0 movi 0, r4 blink tr0, r18 #endif #endif ! arrange for exit to call fini pt/l _atexit, tr1 LOAD_ADDR (_fini, r2) blink tr1, r18 ! call init blink tr5, r18 ! call the mainline blink tr6, r18 ! call exit blink tr7, r18 ! We should never return from _exit but in case we do we would enter the ! the following tight loop. This avoids executing any data that might follow. limbo: pt/l limbo, tr0 blink tr0, r63 #ifdef MMU_SUPPORT ! All these traps are handled in the same place. .balign 256 vbr_start: pt/l handler, tr0 ! tr0 trashed. blink tr0, r63 .balign 256 vbr_100: pt/l handler, tr0 ! tr0 trashed. blink tr0, r63 vbr_100_end: .balign 256 vbr_200: pt/l handler, tr0 ! tr0 trashed. blink tr0, r63 .balign 256 vbr_300: pt/l handler, tr0 ! tr0 trashed. blink tr0, r63 .balign 256 vbr_400: ! Should be at vbr+0x400 handler: /* If the trap handler is there call it */ LOAD_ADDR (__superh_trap_handler, r2) pta chandler,tr2 beq r2, r63, tr2 /* If zero, ie not present branch around to chandler */ /* Now call the trap handler with as much of the context unchanged as possible. Move trapping address into R18 to make it look like the trap point */ getcon spc, r18 pt/l __superh_trap_handler, tr0 blink tr0, r7 chandler: getcon spc, r62 getcon expevt, r2 pt/l _exit, tr0 blink tr0, r63 /* Simulated trap handler */ .section .text..SHmedia32,"ax" gcc2_compiled.: .section .debug_abbrev .Ldebug_abbrev0: .section .text..SHmedia32 .Ltext0: .section .debug_info .Ldebug_info0: .section .debug_line .Ldebug_line0: .section .text..SHmedia32,"ax" .align 5 .global __superh_trap_handler .type __superh_trap_handler,@function __superh_trap_handler: .LFB1: ptabs r18, tr0 addi.l r15, -8, r15 st.l r15, 4, r14 addi.l r15, -8, r15 add.l r15, r63, r14 st.l r14, 0, r2 ptabs r7, tr0 addi.l r14, 8, r14 add.l r14, r63, r15 ld.l r15, 4, r14 addi.l r15, 8, r15 blink tr0, r63 .LFE1: .Lfe1: .size __superh_trap_handler,.Lfe1-__superh_trap_handler .section .text..SHmedia32 .Letext0: .section .debug_info .ualong 0xa7 .uaword 0x2 .ualong .Ldebug_abbrev0 .byte 0x4 .byte 0x1 .ualong .Ldebug_line0 .ualong .Letext0 .ualong .Ltext0 .string "trap_handler.c" .string "xxxxxxxxxxxxxxxxxxxxxxxxxxxx" .string "GNU C 2.97-sh5-010522" .byte 0x1 .byte 0x2 .ualong 0x9a .byte 0x1 .string "_superh_trap_handler" .byte 0x1 .byte 0x2 .byte 0x1 .ualong .LFB1 .ualong .LFE1 .byte 0x1 .byte 0x5e .byte 0x3 .string "trap_reason" .byte 0x1 .byte 0x1 .ualong 0x9a .byte 0x2 .byte 0x91 .byte 0x0 .byte 0x0 .byte 0x4 .string "unsigned int" .byte 0x4 .byte 0x7 .byte 0x0 .section .debug_abbrev .byte 0x1 .byte 0x11 .byte 0x1 .byte 0x10 .byte 0x6 .byte 0x12 .byte 0x1 .byte 0x11 .byte 0x1 .byte 0x3 .byte 0x8 .byte 0x1b .byte 0x8 .byte 0x25 .byte 0x8 .byte 0x13 .byte 0xb .byte 0,0 .byte 0x2 .byte 0x2e .byte 0x1 .byte 0x1 .byte 0x13 .byte 0x3f .byte 0xc .byte 0x3 .byte 0x8 .byte 0x3a .byte 0xb .byte 0x3b .byte 0xb .byte 0x27 .byte 0xc .byte 0x11 .byte 0x1 .byte 0x12 .byte 0x1 .byte 0x40 .byte 0xa .byte 0,0 .byte 0x3 .byte 0x5 .byte 0x0 .byte 0x3 .byte 0x8 .byte 0x3a .byte 0xb .byte 0x3b .byte 0xb .byte 0x49 .byte 0x13 .byte 0x2 .byte 0xa .byte 0,0 .byte 0x4 .byte 0x24 .byte 0x0 .byte 0x3 .byte 0x8 .byte 0xb .byte 0xb .byte 0x3e .byte 0xb .byte 0,0 .byte 0 .section .debug_pubnames .ualong 0x27 .uaword 0x2 .ualong .Ldebug_info0 .ualong 0xab .ualong 0x5b .string "_superh_trap_handler" .ualong 0x0 .section .debug_aranges .ualong 0x1c .uaword 0x2 .ualong .Ldebug_info0 .byte 0x4 .byte 0x0 .uaword 0x0,0 .ualong .Ltext0 .ualong .Letext0-.Ltext0 .ualong 0x0 .ualong 0x0 .ident "GCC: (GNU) 2.97-sh5-010522" #endif /* MMU_SUPPORT */ #else /* ! __SH5__ */ ! make a place to keep any previous value of the vbr register ! this will only have a value if it has been set by redboot (for example) .section .bss old_vbr: .long 0 #ifdef PROFILE profiling_enabled: .long 0 #endif .section .text .global start .import ___rtos_profiler_start_timer .weak ___rtos_profiler_start_timer start: mov.l stack_k,r15 #if defined (__SH3__) || (defined (__SH_FPU_ANY__) && ! defined (__SH2A__)) || defined (__SH4_NOFPU__) #define VBR_SETUP ! before zeroing the bss ... ! if the vbr is already set to vbr_start then the program has been restarted ! (i.e. it is not the first time the program has been run since reset) ! reset the vbr to its old value before old_vbr (in bss) is wiped ! this ensures that the later code does not create a circular vbr chain stc vbr, r1 mov.l vbr_start_k, r2 cmp/eq r1, r2 bf 0f ! reset the old vbr value mov.l old_vbr_k, r1 mov.l @r1, r2 ldc r2, vbr 0: #endif /* VBR_SETUP */ ! zero out bss mov.l edata_k,r0 mov.l end_k,r1 mov #0,r2 start_l: mov.l r2,@r0 add #4,r0 cmp/ge r0,r1 bt start_l #if defined (__SH_FPU_ANY__) mov.l set_fpscr_k, r1 mov #4,r4 jsr @r1 shll16 r4 ! Set DN bit (flush denormal inputs to zero) lds r3,fpscr ! Switch to default precision #endif /* defined (__SH_FPU_ANY__) */ #ifdef VBR_SETUP ! save the existing contents of the vbr ! there will only be a prior value when using something like redboot ! otherwise it will be zero stc vbr, r1 mov.l old_vbr_k, r2 mov.l r1, @r2 ! setup vbr mov.l vbr_start_k, r1 ldc r1,vbr #endif /* VBR_SETUP */ ! if an rtos is exporting a timer start fn, ! then pick up an SR which does not enable ints ! (the rtos will take care of this) mov.l rtos_start_fn, r0 mov.l sr_initial_bare, r1 tst r0, r0 bt set_sr mov.l sr_initial_rtos, r1 set_sr: ! Set status register (sr) ldc r1, sr ! arrange for exit to call fini mov.l atexit_k,r0 mov.l fini_k,r4 jsr @r0 nop #ifdef PROFILE ! arrange for exit to call _mcleanup (via stop_profiling) mova stop_profiling,r0 mov.l atexit_k,r1 jsr @r1 mov r0, r4 ! Call profiler startup code mov.l monstartup_k, r0 mov.l start_k, r4 mov.l etext_k, r5 jsr @r0 nop ! enable profiling trap ! until now any trap 33s will have been ignored ! This means that all library functions called before this point ! (directly or indirectly) may have the profiling trap at the start. ! Therefore, only mcount itself may not have the extra header. mov.l profiling_enabled_k2, r0 mov #1, r1 mov.l r1, @r0 #endif /* PROFILE */ ! call init mov.l init_k,r0 jsr @r0 nop ! call the mainline mov.l main_k,r0 jsr @r0 nop ! call exit mov r0,r4 mov.l exit_k,r0 jsr @r0 nop .balign 4 #ifdef PROFILE stop_profiling: # stop mcount counting mov.l profiling_enabled_k2, r0 mov #0, r1 mov.l r1, @r0 # call mcleanup mov.l mcleanup_k, r0 jmp @r0 nop .balign 4 mcleanup_k: .long __mcleanup monstartup_k: .long ___monstartup profiling_enabled_k2: .long profiling_enabled start_k: .long _start etext_k: .long __etext #endif /* PROFILE */ .align 2 #if defined (__SH_FPU_ANY__) set_fpscr_k: .long ___set_fpscr #endif /* defined (__SH_FPU_ANY__) */ stack_k: .long _stack edata_k: .long _edata end_k: .long _end main_k: .long ___setup_argv_and_call_main exit_k: .long _exit atexit_k: .long _atexit init_k: .long _init fini_k: .long _fini #ifdef VBR_SETUP old_vbr_k: .long old_vbr vbr_start_k: .long vbr_start #endif /* VBR_SETUP */ sr_initial_rtos: ! Privileged mode RB 1 BL 0. Keep BL 0 to allow default trap handlers to work. ! Whether profiling or not, keep interrupts masked, ! the RTOS will enable these if required. .long 0x600000f1 rtos_start_fn: .long ___rtos_profiler_start_timer #ifdef PROFILE sr_initial_bare: ! Privileged mode RB 1 BL 0. Keep BL 0 to allow default trap handlers to work. ! For bare machine, we need to enable interrupts to get profiling working .long 0x60000001 #else sr_initial_bare: ! Privileged mode RB 1 BL 0. Keep BL 0 to allow default trap handlers to work. ! Keep interrupts disabled - the application will enable as required. .long 0x600000f1 #endif ! supplied for backward compatibility only, in case of linking ! code whose main() was compiled with an older version of GCC. .global ___main ___main: rts nop #ifdef VBR_SETUP ! Exception handlers .section .text.vbr, "ax" vbr_start: .org 0x100 vbr_100: #ifdef PROFILE ! Note on register usage. ! we use r0..r3 as scratch in this code. If we are here due to a trapa for profiling ! then this is OK as we are just before executing any function code. ! The other r4..r7 we save explicityl on the stack ! Remaining registers are saved by normal ABI conventions and we assert we do not ! use floating point registers. mov.l expevt_k1, r1 mov.l @r1, r1 mov.l event_mask, r0 and r0,r1 mov.l trapcode_k, r2 cmp/eq r1,r2 bt 1f bra handler_100 ! if not a trapa, go to default handler nop 1: mov.l trapa_k, r0 mov.l @r0, r0 shlr2 r0 ! trapa code is shifted by 2. cmp/eq #33, r0 bt 2f bra handler_100 nop 2: ! If here then it looks like we have trap #33 ! Now we need to call mcount with the following convention ! Save and restore r4..r7 mov.l r4,@-r15 mov.l r5,@-r15 mov.l r6,@-r15 mov.l r7,@-r15 sts.l pr,@-r15 ! r4 is frompc. ! r5 is selfpc ! r0 is the branch back address. ! The code sequence emitted by gcc for the profiling trap is ! .align 2 ! trapa #33 ! .align 2 ! .long lab Where lab is planted by the compiler. This is the address ! of a datum that needs to be incremented. sts pr, r4 ! frompc stc spc, r5 ! selfpc mov #2, r2 not r2, r2 ! pattern to align to 4 and r2, r5 ! r5 now has aligned address ! add #4, r5 ! r5 now has address of address mov r5, r2 ! Remember it. ! mov.l @r5, r5 ! r5 has value of lable (lab in above example) add #8, r2 ldc r2, spc ! our return address avoiding address word ! only call mcount if profiling is enabled mov.l profiling_enabled_k, r0 mov.l @r0, r0 cmp/eq #0, r0 bt 3f ! call mcount mov.l mcount_k, r2 jsr @r2 nop 3: lds.l @r15+,pr mov.l @r15+,r7 mov.l @r15+,r6 mov.l @r15+,r5 mov.l @r15+,r4 rte nop .balign 4 event_mask: .long 0xfff trapcode_k: .long 0x160 expevt_k1: .long 0xff000024 ! Address of expevt trapa_k: .long 0xff000020 mcount_k: .long __call_mcount profiling_enabled_k: .long profiling_enabled #endif ! Non profiling case. handler_100: mov.l 2f, r0 ! load the old vbr setting (if any) mov.l @r0, r0 cmp/eq #0, r0 bf 1f ! no previous vbr - jump to own generic handler bra handler nop 1: ! there was a previous handler - chain them add #0x7f, r0 ! 0x7f add #0x7f, r0 ! 0xfe add #0x2, r0 ! add 0x100 without corrupting another register jmp @r0 nop .balign 4 2: .long old_vbr .org 0x400 vbr_400: ! Should be at vbr+0x400 mov.l 2f, r0 ! load the old vbr setting (if any) mov.l @r0, r0 cmp/eq #0, r0 ! no previous vbr - jump to own generic handler bt handler ! there was a previous handler - chain them rotcr r0 rotcr r0 add #0x7f, r0 ! 0x1fc add #0x7f, r0 ! 0x3f8 add #0x02, r0 ! 0x400 rotcl r0 rotcl r0 ! Add 0x400 without corrupting another register jmp @r0 nop .balign 4 2: .long old_vbr handler: /* If the trap handler is there call it */ mov.l superh_trap_handler_k, r0 cmp/eq #0, r0 ! True if zero. bf 3f bra chandler nop 3: ! Here handler available, call it. /* Now call the trap handler with as much of the context unchanged as possible. Move trapping address into PR to make it look like the trap point */ stc spc, r1 lds r1, pr mov.l expevt_k, r4 mov.l @r4, r4 ! r4 is value of expevt, first parameter. mov r1, r5 ! Remember trapping pc. mov r1, r6 ! Remember trapping pc. mov.l chandler_k, r1 mov.l superh_trap_handler_k, r2 ! jmp to trap handler to avoid disturbing pr. jmp @r2 nop .org 0x600 vbr_600: #ifdef PROFILE ! Should be at vbr+0x600 ! Now we are in the land of interrupts so need to save more state. ! Save register state mov.l interrupt_stack_k, r15 ! r15 has been saved to sgr. mov.l r0,@-r15 mov.l r1,@-r15 mov.l r2,@-r15 mov.l r3,@-r15 mov.l r4,@-r15 mov.l r5,@-r15 mov.l r6,@-r15 mov.l r7,@-r15 sts.l pr,@-r15 sts.l mach,@-r15 sts.l macl,@-r15 #if defined(__SH_FPU_ANY__) ! Save fpul and fpscr, save fr0-fr7 in 64 bit mode ! and set the pervading precision for the timer_handler mov #0,r0 sts.l fpul,@-r15 sts.l fpscr,@-r15 lds r0,fpscr ! Clear fpscr fmov fr0,@-r15 fmov fr1,@-r15 fmov fr2,@-r15 fmov fr3,@-r15 mov.l pervading_precision_k,r0 fmov fr4,@-r15 fmov fr5,@-r15 mov.l @r0,r0 fmov fr6,@-r15 fmov fr7,@-r15 lds r0,fpscr #endif /* __SH_FPU_ANY__ */ ! Pass interrupted pc to timer_handler as first parameter (r4). stc spc, r4 mov.l timer_handler_k, r0 jsr @r0 nop #if defined(__SH_FPU_ANY__) mov #0,r0 lds r0,fpscr ! Clear the fpscr fmov @r15+,fr7 fmov @r15+,fr6 fmov @r15+,fr5 fmov @r15+,fr4 fmov @r15+,fr3 fmov @r15+,fr2 fmov @r15+,fr1 fmov @r15+,fr0 lds.l @r15+,fpscr lds.l @r15+,fpul #endif /* __SH_FPU_ANY__ */ lds.l @r15+,macl lds.l @r15+,mach lds.l @r15+,pr mov.l @r15+,r7 mov.l @r15+,r6 mov.l @r15+,r5 mov.l @r15+,r4 mov.l @r15+,r3 mov.l @r15+,r2 mov.l @r15+,r1 mov.l @r15+,r0 stc sgr, r15 ! Restore r15, destroyed by this sequence. rte nop #if defined(__SH_FPU_ANY__) .balign 4 pervading_precision_k: #define CONCAT1(A,B) A##B #define CONCAT(A,B) CONCAT1(A,B) .long CONCAT(__USER_LABEL_PREFIX__,__fpscr_values)+4 #endif #else mov.l 2f, r0 ! Load the old vbr setting (if any). mov.l @r0, r0 cmp/eq #0, r0 ! no previous vbr - jump to own handler bt chandler ! there was a previous handler - chain them rotcr r0 rotcr r0 add #0x7f, r0 ! 0x1fc add #0x7f, r0 ! 0x3f8 add #0x7f, r0 ! 0x5f4 add #0x03, r0 ! 0x600 rotcl r0 rotcl r0 ! Add 0x600 without corrupting another register jmp @r0 nop .balign 4 2: .long old_vbr #endif /* PROFILE code */ chandler: mov.l expevt_k, r4 mov.l @r4, r4 ! r4 is value of expevt hence making this the return code mov.l handler_exit_k,r0 jsr @r0 nop ! We should never return from _exit but in case we do we would enter the ! the following tight loop limbo: bra limbo nop .balign 4 #ifdef PROFILE interrupt_stack_k: .long __timer_stack ! The high end of the stack timer_handler_k: .long __profil_counter #endif expevt_k: .long 0xff000024 ! Address of expevt chandler_k: .long chandler superh_trap_handler_k: .long __superh_trap_handler handler_exit_k: .long _exit .align 2 ! Simulated compile of trap handler. .section .debug_abbrev,"",@progbits .Ldebug_abbrev0: .section .debug_info,"",@progbits .Ldebug_info0: .section .debug_line,"",@progbits .Ldebug_line0: .text .Ltext0: .align 5 .type __superh_trap_handler,@function __superh_trap_handler: .LFB1: mov.l r14,@-r15 .LCFI0: add #-4,r15 .LCFI1: mov r15,r14 .LCFI2: mov.l r4,@r14 lds r1, pr add #4,r14 mov r14,r15 mov.l @r15+,r14 rts nop .LFE1: .Lfe1: .size __superh_trap_handler,.Lfe1-__superh_trap_handler .section .debug_frame,"",@progbits .Lframe0: .ualong .LECIE0-.LSCIE0 .LSCIE0: .ualong 0xffffffff .byte 0x1 .string "" .uleb128 0x1 .sleb128 -4 .byte 0x11 .byte 0xc .uleb128 0xf .uleb128 0x0 .align 2 .LECIE0: .LSFDE0: .ualong .LEFDE0-.LASFDE0 .LASFDE0: .ualong .Lframe0 .ualong .LFB1 .ualong .LFE1-.LFB1 .byte 0x4 .ualong .LCFI0-.LFB1 .byte 0xe .uleb128 0x4 .byte 0x4 .ualong .LCFI1-.LCFI0 .byte 0xe .uleb128 0x8 .byte 0x8e .uleb128 0x1 .byte 0x4 .ualong .LCFI2-.LCFI1 .byte 0xd .uleb128 0xe .align 2 .LEFDE0: .text .Letext0: .section .debug_info .ualong 0xb3 .uaword 0x2 .ualong .Ldebug_abbrev0 .byte 0x4 .uleb128 0x1 .ualong .Ldebug_line0 .ualong .Letext0 .ualong .Ltext0 .string "trap_handler.c" .string "xxxxxxxxxxxxxxxxxxxxxxxxxxxx" .string "GNU C 3.2 20020529 (experimental)" .byte 0x1 .uleb128 0x2 .ualong 0xa6 .byte 0x1 .string "_superh_trap_handler" .byte 0x1 .byte 0x2 .byte 0x1 .ualong .LFB1 .ualong .LFE1 .byte 0x1 .byte 0x5e .uleb128 0x3 .string "trap_reason" .byte 0x1 .byte 0x1 .ualong 0xa6 .byte 0x2 .byte 0x91 .sleb128 0 .byte 0x0 .uleb128 0x4 .string "unsigned int" .byte 0x4 .byte 0x7 .byte 0x0 .section .debug_abbrev .uleb128 0x1 .uleb128 0x11 .byte 0x1 .uleb128 0x10 .uleb128 0x6 .uleb128 0x12 .uleb128 0x1 .uleb128 0x11 .uleb128 0x1 .uleb128 0x3 .uleb128 0x8 .uleb128 0x1b .uleb128 0x8 .uleb128 0x25 .uleb128 0x8 .uleb128 0x13 .uleb128 0xb .byte 0x0 .byte 0x0 .uleb128 0x2 .uleb128 0x2e .byte 0x1 .uleb128 0x1 .uleb128 0x13 .uleb128 0x3f .uleb128 0xc .uleb128 0x3 .uleb128 0x8 .uleb128 0x3a .uleb128 0xb .uleb128 0x3b .uleb128 0xb .uleb128 0x27 .uleb128 0xc .uleb128 0x11 .uleb128 0x1 .uleb128 0x12 .uleb128 0x1 .uleb128 0x40 .uleb128 0xa .byte 0x0 .byte 0x0 .uleb128 0x3 .uleb128 0x5 .byte 0x0 .uleb128 0x3 .uleb128 0x8 .uleb128 0x3a .uleb128 0xb .uleb128 0x3b .uleb128 0xb .uleb128 0x49 .uleb128 0x13 .uleb128 0x2 .uleb128 0xa .byte 0x0 .byte 0x0 .uleb128 0x4 .uleb128 0x24 .byte 0x0 .uleb128 0x3 .uleb128 0x8 .uleb128 0xb .uleb128 0xb .uleb128 0x3e .uleb128 0xb .byte 0x0 .byte 0x0 .byte 0x0 .section .debug_pubnames,"",@progbits .ualong 0x27 .uaword 0x2 .ualong .Ldebug_info0 .ualong 0xb7 .ualong 0x67 .string "_superh_trap_handler" .ualong 0x0 .section .debug_aranges,"",@progbits .ualong 0x1c .uaword 0x2 .ualong .Ldebug_info0 .byte 0x4 .byte 0x0 .uaword 0x0 .uaword 0x0 .ualong .Ltext0 .ualong .Letext0-.Ltext0 .ualong 0x0 .ualong 0x0 #endif /* VBR_SETUP */ #endif /* ! __SH5__ */