dnl dnl GLIBCXX_CONDITIONAL (NAME, SHELL-TEST) dnl dnl Exactly like AM_CONDITIONAL, but delays evaluation of the test until the dnl end of configure. This lets tested variables be reassigned, and the dnl conditional will depend on the final state of the variable. For a simple dnl example of why this is needed, see GLIBCXX_ENABLE_HOSTED. dnl m4_define([_m4_divert(glibcxx_diversion)], 8000)dnl AC_DEFUN([GLIBCXX_CONDITIONAL], [dnl m4_divert_text([glibcxx_diversion],dnl AM_CONDITIONAL([$1],[$2]) )dnl ])dnl AC_DEFUN([GLIBCXX_EVALUATE_CONDITIONALS], [m4_undivert([glibcxx_diversion])])dnl dnl dnl Check to see what architecture and operating system we are compiling dnl for. Also, if architecture- or OS-specific flags are required for dnl compilation, pick them up here. dnl AC_DEFUN([GLIBCXX_CHECK_HOST], [ . $glibcxx_srcdir/configure.host AC_MSG_NOTICE([CPU config directory is $cpu_include_dir]) AC_MSG_NOTICE([OS config directory is $os_include_dir]) ]) dnl dnl Initialize the rest of the library configury. At this point we have dnl variables like $host. dnl dnl Sets: dnl SUBDIRS dnl Substs: dnl glibcxx_builddir (absolute path) dnl glibcxx_srcdir (absolute path) dnl toplevel_srcdir (absolute path) dnl with_cross_host dnl with_newlib dnl with_target_subdir dnl plus dnl - the variables in GLIBCXX_CHECK_HOST / configure.host dnl - default settings for all AM_CONFITIONAL test variables dnl - lots of tools, like CC and CXX dnl AC_DEFUN([GLIBCXX_CONFIGURE], [ # Keep these sync'd with the list in Makefile.am. The first provides an # expandable list at autoconf time; the second provides an expandable list # (i.e., shell variable) at configure time. m4_define([glibcxx_SUBDIRS],[include libmath libsupc++ src po testsuite]) SUBDIRS='glibcxx_SUBDIRS' # These need to be absolute paths, yet at the same time need to # canonicalize only relative paths, because then amd will not unmount # drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd. glibcxx_builddir=`${PWDCMD-pwd}` case $srcdir in [\\/$]* | ?:[\\/]*) glibcxx_srcdir=${srcdir} ;; *) glibcxx_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;; esac toplevel_srcdir=${glibcxx_srcdir}/.. AC_SUBST(glibcxx_builddir) AC_SUBST(glibcxx_srcdir) AC_SUBST(toplevel_srcdir) # We use these options to decide which functions to include. They are # set from the top level. AC_ARG_WITH([target-subdir], AC_HELP_STRING([--with-target-subdir=SUBDIR], [configuring in a subdirectory])) AC_ARG_WITH([cross-host], AC_HELP_STRING([--with-cross-host=HOST], [configuring with a cross compiler])) AC_ARG_WITH([newlib], AC_HELP_STRING([--with-newlib], [assume newlib as a system C library])) # We're almost certainly being configured before anything else which uses # C++, so all of our AC_PROG_* discoveries will be cached. It's vital that # we not cache the value of CXX that we "discover" here, because it's set # to something unique for us and libjava. Other target libraries need to # find CXX for themselves. We yank the rug out from under the normal AC_* # process by sneakily renaming the cache variable. This also lets us debug # the value of "our" CXX in postmortems. # # We must also force CXX to /not/ be a precious variable, otherwise the # wrong (non-multilib-adjusted) value will be used in multilibs. This # little trick also affects CPPFLAGS, CXXFLAGS, and LDFLAGS. And as a side # effect, CXXFLAGS is no longer automagically subst'd, so we have to do # that ourselves. Un-preciousing AC_PROG_CC also affects CC and CFLAGS. # # -fno-builtin must be present here so that a non-conflicting form of # std::exit can be guessed by AC_PROG_CXX, and used in later tests. m4_define([ac_cv_prog_CXX],[glibcxx_cv_prog_CXX]) m4_rename([_AC_ARG_VAR_PRECIOUS],[glibcxx_PRECIOUS]) m4_define([_AC_ARG_VAR_PRECIOUS],[]) save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fno-builtin" AC_PROG_CC AC_PROG_CXX CXXFLAGS="$save_CXXFLAGS" m4_rename([glibcxx_PRECIOUS],[_AC_ARG_VAR_PRECIOUS]) AC_SUBST(CFLAGS) AC_SUBST(CXXFLAGS) # Will set LN_S to either 'ln -s', 'ln', or 'cp -p' (if linking isn't # available). Uncomment the next line to force a particular method. AC_PROG_LN_S #LN_S='cp -p' AC_CHECK_TOOL(AS, as) AC_CHECK_TOOL(AR, ar) AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error) AM_MAINTAINER_MODE # Set up safe default values for all subsequent AM_CONDITIONAL tests # which are themselves conditionally expanded. ## (Right now, this only matters for enable_wchar_t, but nothing prevents ## other macros from doing the same. This should be automated.) -pme need_libmath=no # Find platform-specific directories containing configuration info. # Also possibly modify flags used elsewhere, as needed by the platform. GLIBCXX_CHECK_HOST ]) dnl dnl Tests for newer compiler features, or features that are present in newer dnl compiler versions but not older compiler versions still in use, should dnl be placed here. dnl dnl Defines: dnl WERROR='-Werror' if requested and possible; g++'s that lack the dnl new inlining code or the new system_header pragma will die on -Werror. dnl Leave it out by default and use maint-mode to use it. dnl SECTION_FLAGS='-ffunction-sections -fdata-sections' if dnl compiler supports it and the user has not requested debug mode. dnl AC_DEFUN([GLIBCXX_CHECK_COMPILER_FEATURES], [ # All these tests are for C++; save the language and the compiler flags. # The CXXFLAGS thing is suspicious, but based on similar bits previously # found in GLIBCXX_CONFIGURE. AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" # Check for maintainer-mode bits. if test x"$USE_MAINTAINER_MODE" = xno; then WERROR='' else WERROR='-Werror' fi # Check for -ffunction-sections -fdata-sections AC_MSG_CHECKING([for g++ that supports -ffunction-sections -fdata-sections]) CXXFLAGS='-Werror -ffunction-sections -fdata-sections' AC_TRY_COMPILE(, [int foo;], [ac_fdsections=yes], [ac_fdsections=no]) if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS="$ac_save_CXXFLAGS" else # this is the suspicious part CXXFLAGS='' fi if test x"$ac_fdsections" = x"yes"; then SECTION_FLAGS='-ffunction-sections -fdata-sections' fi AC_MSG_RESULT($ac_fdsections) AC_LANG_RESTORE AC_SUBST(WERROR) AC_SUBST(SECTION_FLAGS) ]) dnl dnl If GNU ld is in use, check to see if tricky linker opts can be used. If dnl the native linker is in use, all variables will be defined to something dnl safe (like an empty string). dnl dnl Defines: dnl SECTION_LDFLAGS='-Wl,--gc-sections' if possible dnl OPT_LDFLAGS='-Wl,-O1' and '-z,relro' if possible dnl LD (as a side effect of testing) dnl Sets: dnl with_gnu_ld dnl glibcxx_gnu_ld_version (possibly) dnl dnl The last will be a single integer, e.g., version 1.23.45.0.67.89 will dnl set glibcxx_gnu_ld_version to 12345. Zeros cause problems. dnl AC_DEFUN([GLIBCXX_CHECK_LINKER_FEATURES], [ # If we're not using GNU ld, then there's no point in even trying these # tests. Check for that first. We should have already tested for gld # by now (in libtool), but require it now just to be safe... test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS='' test -z "$OPT_LDFLAGS" && OPT_LDFLAGS='' AC_REQUIRE([AC_PROG_LD]) AC_REQUIRE([AC_PROG_AWK]) # The name set by libtool depends on the version of libtool. Shame on us # for depending on an impl detail, but c'est la vie. Older versions used # ac_cv_prog_gnu_ld, but now it's lt_cv_prog_gnu_ld, and is copied back on # top of with_gnu_ld (which is also set by --with-gnu-ld, so that actually # makes sense). We'll test with_gnu_ld everywhere else, so if that isn't # set (hence we're using an older libtool), then set it. if test x${with_gnu_ld+set} != xset; then if test x${ac_cv_prog_gnu_ld+set} != xset; then # We got through "ac_require(ac_prog_ld)" and still not set? Huh? with_gnu_ld=no else with_gnu_ld=$ac_cv_prog_gnu_ld fi fi # Start by getting the version number. I think the libtool test already # does some of this, but throws away the result. AC_MSG_CHECKING([for ld version]) changequote(,) ldver=`$LD --version 2>/dev/null | head -1 | \ sed -e 's/GNU ld version \([0-9.][0-9.]*\).*/\1/'` changequote([,]) glibcxx_gnu_ld_version=`echo $ldver | \ $AWK -F. '{ if (NF<3) [$]3=0; print ([$]1*100+[$]2)*100+[$]3 }'` AC_MSG_RESULT($glibcxx_gnu_ld_version) # Set --gc-sections. glibcxx_gcsections_min_ld=21602 if test x"$with_gnu_ld" = x"yes" && test $glibcxx_gnu_ld_version -gt $glibcxx_gcsections_min_ld ; then # Sufficiently young GNU ld it is! Joy and bunny rabbits! # NB: This flag only works reliably after 2.16.1. Configure tests # for this are difficult, so hard wire a value that should work. # All these tests are for C++, but run with the "C" compiler driver. # Need to do this so that g++ won't try to link in libstdc++/libsupc++. ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS='-x c++ -Wl,--gc-sections' # Check for -Wl,--gc-sections AC_MSG_CHECKING([for ld that supports -Wl,--gc-sections]) AC_TRY_LINK([ int one(void) { return 1; } int two(void) { return 2; } ], [ two(); ] , [ac_gcsections=yes], [ac_gcsections=no]) if test "$ac_gcsections" = "yes"; then rm -f conftest.c touch conftest.c if $CC -c conftest.c; then if $LD --gc-sections -o conftest conftest.o 2>&1 | \ grep "Warning: gc-sections option ignored" > /dev/null; then ac_gcsections=no fi fi rm -f conftest.c conftest.o conftest fi if test "$ac_gcsections" = "yes"; then SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS" fi AC_MSG_RESULT($ac_gcsections) if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" else # this is the suspicious part CFLAGS='' fi fi # Set -z,relro. # Note this is only for shared objects. ac_ld_relro=no if test x"$with_gnu_ld" = x"yes"; then AC_MSG_CHECKING([for ld that supports -Wl,-z,relro]) cxx_z_relo=`$LD -v --help 2>/dev/null | grep "z relro"` if test -n "$cxx_z_relo"; then OPT_LDFLAGS="-Wl,-z,relro" ac_ld_relro=yes fi AC_MSG_RESULT($ac_ld_relro) fi # Set linker optimization flags. if test x"$with_gnu_ld" = x"yes"; then OPT_LDFLAGS="-Wl,-O1 $OPT_LDFLAGS" fi AC_SUBST(SECTION_LDFLAGS) AC_SUBST(OPT_LDFLAGS) ]) dnl dnl Check to see if this target can enable the iconv specializations. dnl If --disable-c-mbchar was given, no wchar_t specialization is enabled. dnl (This must have been previously checked, along with the rest of C99 dnl support.) By default, iconv support is disabled. dnl dnl Defines: dnl _GLIBCXX_USE_ICONV if all the bits are found. dnl Substs: dnl LIBICONV to a -l string containing the iconv library, if needed. dnl AC_DEFUN([GLIBCXX_CHECK_ICONV_SUPPORT], [ enable_iconv=no # Only continue checking if the ISO C99 headers exist and support is on. if test x"$enable_wchar_t" = xyes; then # Use iconv for wchar_t to char conversions. As such, check for # X/Open Portability Guide, version 2 features (XPG2). AC_CHECK_HEADER(iconv.h, ac_has_iconv_h=yes, ac_has_iconv_h=no) AC_CHECK_HEADER(langinfo.h, ac_has_langinfo_h=yes, ac_has_langinfo_h=no) # Check for existence of libiconv.a providing XPG2 wchar_t support. AC_CHECK_LIB(iconv, iconv, LIBICONV="-liconv") ac_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" AC_SUBST(LIBICONV) AC_CHECK_FUNCS([iconv_open iconv_close iconv nl_langinfo], [ac_XPG2funcs=yes], [ac_XPG2funcs=no]) LIBS="$ac_save_LIBS" if test x"$ac_has_iconv_h" = xyes && test x"$ac_has_langinfo_h" = xyes && test x"$ac_XPG2funcs" = xyes; then AC_DEFINE([_GLIBCXX_USE_ICONV],1, [Define if iconv and related functions exist and are usable.]) enable_iconv=yes fi fi AC_MSG_CHECKING([for enabled iconv specializations]) AC_MSG_RESULT($enable_iconv) ]) dnl dnl Check for headers for, and arguments to, the setrlimit() function. dnl Used only in testsuite_hooks.h. Called from GLIBCXX_CONFIGURE_TESTSUITE. dnl dnl Defines: dnl _GLIBCXX_RES_LIMITS if we can set artificial resource limits dnl various HAVE_LIMIT_* for individual limit names dnl AC_DEFUN([GLIBCXX_CHECK_SETRLIMIT_ancilliary], [ AC_MSG_CHECKING([for RLIMIT_$1]) AC_TRY_COMPILE( [#include #include #include ], [ int f = RLIMIT_$1 ; ], [glibcxx_mresult=1], [glibcxx_mresult=0]) AC_DEFINE_UNQUOTED(HAVE_LIMIT_$1, $glibcxx_mresult, [Only used in build directory testsuite_hooks.h.]) if test $glibcxx_mresult = 1 ; then res=yes ; else res=no ; fi AC_MSG_RESULT($res) ]) AC_DEFUN([GLIBCXX_CHECK_SETRLIMIT], [ setrlimit_have_headers=yes AC_CHECK_HEADERS(unistd.h sys/time.h sys/resource.h, [], [setrlimit_have_headers=no]) # If don't have the headers, then we can't run the tests now, and we # won't be seeing any of these during testsuite compilation. if test $setrlimit_have_headers = yes; then # Can't do these in a loop, else the resulting syntax is wrong. GLIBCXX_CHECK_SETRLIMIT_ancilliary(DATA) GLIBCXX_CHECK_SETRLIMIT_ancilliary(RSS) GLIBCXX_CHECK_SETRLIMIT_ancilliary(VMEM) GLIBCXX_CHECK_SETRLIMIT_ancilliary(AS) GLIBCXX_CHECK_SETRLIMIT_ancilliary(FSIZE) # Check for rlimit, setrlimit. AC_CACHE_VAL(ac_setrlimit, [ AC_TRY_COMPILE( [#include #include #include ], [struct rlimit r; setrlimit(0, &r);], [ac_setrlimit=yes], [ac_setrlimit=no]) ]) fi AC_MSG_CHECKING([for testsuite resource limits support]) if test $setrlimit_have_headers = yes && test $ac_setrlimit = yes; then ac_res_limits=yes AC_DEFINE(_GLIBCXX_RES_LIMITS, 1, [Define if using setrlimit to set resource limits during "make check"]) else ac_res_limits=no fi AC_MSG_RESULT($ac_res_limits) ]) dnl dnl Check whether S_ISREG (Posix) or S_IFREG is available in . dnl Define HAVE_S_ISREG / HAVE_S_IFREG appropriately. dnl AC_DEFUN([GLIBCXX_CHECK_S_ISREG_OR_S_IFREG], [ AC_MSG_CHECKING([for S_ISREG or S_IFREG]) AC_CACHE_VAL(glibcxx_cv_S_ISREG, [ AC_TRY_LINK( [#include ], [struct stat buffer; fstat(0, &buffer); S_ISREG(buffer.st_mode);], [glibcxx_cv_S_ISREG=yes], [glibcxx_cv_S_ISREG=no]) ]) AC_CACHE_VAL(glibcxx_cv_S_IFREG, [ AC_TRY_LINK( [#include ], [struct stat buffer; fstat(0, &buffer); S_IFREG & buffer.st_mode;], [glibcxx_cv_S_IFREG=yes], [glibcxx_cv_S_IFREG=no]) ]) res=no if test $glibcxx_cv_S_ISREG = yes; then AC_DEFINE(HAVE_S_ISREG, 1, [Define if S_IFREG is available in .]) res=S_ISREG elif test $glibcxx_cv_S_IFREG = yes; then AC_DEFINE(HAVE_S_IFREG, 1, [Define if S_IFREG is available in .]) res=S_IFREG fi AC_MSG_RESULT($res) ]) dnl dnl Check whether poll is available in , and define HAVE_POLL. dnl AC_DEFUN([GLIBCXX_CHECK_POLL], [ AC_MSG_CHECKING([for poll]) AC_CACHE_VAL(glibcxx_cv_POLL, [ AC_TRY_LINK( [#include ], [struct pollfd pfd[1]; pfd[0].events = POLLIN; poll(pfd, 1, 0);], [glibcxx_cv_POLL=yes], [glibcxx_cv_POLL=no]) ]) if test $glibcxx_cv_POLL = yes; then AC_DEFINE(HAVE_POLL, 1, [Define if poll is available in .]) fi AC_MSG_RESULT($glibcxx_cv_POLL) ]) dnl dnl Check whether writev is available in , and define HAVE_WRITEV. dnl AC_DEFUN([GLIBCXX_CHECK_WRITEV], [ AC_MSG_CHECKING([for writev]) AC_CACHE_VAL(glibcxx_cv_WRITEV, [ AC_TRY_LINK( [#include ], [struct iovec iov[2]; writev(0, iov, 0);], [glibcxx_cv_WRITEV=yes], [glibcxx_cv_WRITEV=no]) ]) if test $glibcxx_cv_WRITEV = yes; then AC_DEFINE(HAVE_WRITEV, 1, [Define if writev is available in .]) fi AC_MSG_RESULT($glibcxx_cv_WRITEV) ]) dnl dnl Check whether int64_t is available in , and define HAVE_INT64_T. dnl AC_DEFUN([GLIBCXX_CHECK_INT64_T], [ AC_MSG_CHECKING([for int64_t]) AC_CACHE_VAL(glibcxx_cv_INT64_T, [ AC_TRY_COMPILE( [#include ], [int64_t var;], [glibcxx_cv_INT64_T=yes], [glibcxx_cv_INT64_T=no]) ]) if test $glibcxx_cv_INT64_T = yes; then AC_DEFINE(HAVE_INT64_T, 1, [Define if int64_t is available in .]) fi AC_MSG_RESULT($glibcxx_cv_INT64_T) ]) dnl dnl Check whether LFS support is available. dnl AC_DEFUN([GLIBCXX_CHECK_LFS], [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fno-exceptions" AC_MSG_CHECKING([for LFS support]) AC_CACHE_VAL(glibcxx_cv_LFS, [ AC_TRY_LINK( [#include #include #include ], [FILE* fp; fopen64("t", "w"); fseeko64(fp, 0, SEEK_CUR); ftello64(fp); lseek64(1, 0, SEEK_CUR); struct stat64 buf; fstat64(1, &buf);], [glibcxx_cv_LFS=yes], [glibcxx_cv_LFS=no]) ]) if test $glibcxx_cv_LFS = yes; then AC_DEFINE(_GLIBCXX_USE_LFS, 1, [Define if LFS support is available.]) fi AC_MSG_RESULT($glibcxx_cv_LFS) CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) dnl dnl Check for whether a fully dynamic basic_string implementation should dnl be turned on, that does not put empty objects in per-process static dnl memory (mostly useful together with shared memory allocators, see PR dnl libstdc++/16612 for details). dnl dnl --enable-fully-dynamic-string defines _GLIBCXX_FULLY_DYNAMIC_STRING dnl --disable-fully-dynamic-string leaves _GLIBCXX_FULLY_DYNAMIC_STRING undefined dnl + Usage: GLIBCXX_ENABLE_FULLY_DYNAMIC_STRING[(DEFAULT)] dnl Where DEFAULT is either `yes' or `no'. dnl AC_DEFUN([GLIBCXX_ENABLE_FULLY_DYNAMIC_STRING], [ GLIBCXX_ENABLE(fully-dynamic-string,$1,,[do not put empty strings in per-process static memory]) if test $enable_fully_dynamic_string = yes; then AC_DEFINE(_GLIBCXX_FULLY_DYNAMIC_STRING, 1, [Define if a fully dynamic basic_string is wanted.]) fi ]) dnl dnl Does any necessary configuration of the testsuite directory. Generates dnl the testsuite_hooks.h header. dnl dnl GLIBCXX_ENABLE_SYMVERS and GLIBCXX_IS_NATIVE must be done before this. dnl dnl Sets: dnl enable_abi_check dnl GLIBCXX_TEST_WCHAR_T dnl GLIBCXX_TEST_THREAD dnl Substs: dnl baseline_dir dnl AC_DEFUN([GLIBCXX_CONFIGURE_TESTSUITE], [ if $GLIBCXX_IS_NATIVE ; then # Do checks for resource limit functions. GLIBCXX_CHECK_SETRLIMIT # Look for setenv, so that extended locale tests can be performed. GLIBCXX_CHECK_STDLIB_DECL_AND_LINKAGE_3(setenv) fi if $GLIBCXX_IS_NATIVE && test $is_hosted = yes && test $enable_symvers != no; then case "$host" in *-*-cygwin*) enable_abi_check=no ;; *) enable_abi_check=yes ;; esac else # Only build this as native, since automake does not understand # CXX_FOR_BUILD. enable_abi_check=no fi # Export file names for ABI checking. baseline_dir="$glibcxx_srcdir/config/abi/post/${abi_baseline_pair}\$(MULTISUBDIR)" AC_SUBST(baseline_dir) ]) dnl dnl Set up *_INCLUDES variables for all sundry Makefile.am's. dnl dnl Substs: dnl GLIBCXX_INCLUDES dnl TOPLEVEL_INCLUDES dnl AC_DEFUN([GLIBCXX_EXPORT_INCLUDES], [ # Used for every C++ compile we perform. GLIBCXX_INCLUDES="\ -I$glibcxx_builddir/include/$host_alias \ -I$glibcxx_builddir/include \ -I$glibcxx_srcdir/libsupc++" # For Canadian crosses, pick this up too. if test $CANADIAN = yes; then GLIBCXX_INCLUDES="$GLIBCXX_INCLUDES -I\${includedir}" fi # Stuff in the actual top level. Currently only used by libsupc++ to # get unwind* headers from the gcc dir. #TOPLEVEL_INCLUDES='-I$(toplevel_srcdir)/gcc -I$(toplevel_srcdir)/include' TOPLEVEL_INCLUDES='-I$(toplevel_srcdir)/gcc' # Now, export this to all the little Makefiles.... AC_SUBST(GLIBCXX_INCLUDES) AC_SUBST(TOPLEVEL_INCLUDES) ]) dnl dnl Set up *_FLAGS and *FLAGS variables for all sundry Makefile.am's. dnl (SECTION_FLAGS is done under CHECK_COMPILER_FEATURES.) dnl dnl Substs: dnl OPTIMIZE_CXXFLAGS dnl WARN_FLAGS dnl AC_DEFUN([GLIBCXX_EXPORT_FLAGS], [ # Optimization flags that are probably a good idea for thrill-seekers. Just # uncomment the lines below and make, everything else is ready to go... # OPTIMIZE_CXXFLAGS = -O3 -fstrict-aliasing -fvtable-gc OPTIMIZE_CXXFLAGS= AC_SUBST(OPTIMIZE_CXXFLAGS) WARN_FLAGS='-Wall -Wextra -Wwrite-strings -Wcast-qual' AC_SUBST(WARN_FLAGS) ]) dnl dnl All installation directory information is determined here. dnl dnl Substs: dnl gxx_install_dir dnl glibcxx_prefixdir dnl glibcxx_toolexecdir dnl glibcxx_toolexeclibdir dnl dnl Assumes cross_compiling bits already done, and with_cross_host in dnl particular. dnl AC_DEFUN([GLIBCXX_EXPORT_INSTALL_INFO], [ glibcxx_toolexecdir=no glibcxx_toolexeclibdir=no glibcxx_prefixdir=$prefix AC_MSG_CHECKING([for gxx-include-dir]) AC_ARG_WITH([gxx-include-dir], AC_HELP_STRING([--with-gxx-include-dir=DIR], [installation directory for include files]), [case "$withval" in yes) AC_MSG_ERROR([Missing directory for --with-gxx-include-dir]) ;; no) gxx_include_dir=no ;; *) gxx_include_dir=$withval ;; esac], [gxx_include_dir=no]) AC_MSG_RESULT($gxx_include_dir) AC_MSG_CHECKING([for --enable-version-specific-runtime-libs]) AC_ARG_ENABLE([version-specific-runtime-libs], AC_HELP_STRING([--enable-version-specific-runtime-libs], [Specify that runtime libraries should be installed in a compiler-specific directory]), [case "$enableval" in yes) version_specific_libs=yes ;; no) version_specific_libs=no ;; *) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);; esac], [version_specific_libs=no]) AC_MSG_RESULT($version_specific_libs) # Default case for install directory for include files. if test $version_specific_libs = no && test $gxx_include_dir = no; then gxx_include_dir='${prefix}/include/c++/${gcc_version}' fi # Version-specific runtime libs processing. if test $version_specific_libs = yes; then # Need the gcc compiler version to know where to install libraries # and header files if --enable-version-specific-runtime-libs option # is selected. FIXME: these variables are misnamed, there are # no executables installed in _toolexecdir or _toolexeclibdir. if test x"$gxx_include_dir" = x"no"; then gxx_include_dir='${libdir}/gcc/${host_alias}/${gcc_version}/include/c++' fi glibcxx_toolexecdir='${libdir}/gcc/${host_alias}' glibcxx_toolexeclibdir='${toolexecdir}/${gcc_version}$(MULTISUBDIR)' fi # Calculate glibcxx_toolexecdir, glibcxx_toolexeclibdir # Install a library built with a cross compiler in tooldir, not libdir. if test x"$glibcxx_toolexecdir" = x"no"; then if test -n "$with_cross_host" && test x"$with_cross_host" != x"no"; then glibcxx_toolexecdir='${exec_prefix}/${host_alias}' glibcxx_toolexeclibdir='${toolexecdir}/lib' else glibcxx_toolexecdir='${libdir}/gcc/${host_alias}' glibcxx_toolexeclibdir='${libdir}' fi multi_os_directory=`$CXX -print-multi-os-directory` case $multi_os_directory in .) ;; # Avoid trailing /. *) glibcxx_toolexeclibdir=$glibcxx_toolexeclibdir/$multi_os_directory ;; esac fi AC_MSG_CHECKING([for install location]) AC_MSG_RESULT($gxx_include_dir) AC_SUBST(glibcxx_prefixdir) AC_SUBST(gxx_include_dir) AC_SUBST(glibcxx_toolexecdir) AC_SUBST(glibcxx_toolexeclibdir) ]) dnl dnl GLIBCXX_ENABLE dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING) dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING, permit a|b|c) dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING, SHELL-CODE-HANDLER) dnl dnl See docs/html/17_intro/configury.html#enable for documentation. dnl m4_define([GLIBCXX_ENABLE],[dnl m4_define([_g_switch],[--enable-$1])dnl m4_define([_g_help],[AC_HELP_STRING(_g_switch$3,[$4 @<:@default=$2@:>@])])dnl AC_ARG_ENABLE($1,_g_help, m4_bmatch([$5], [^permit ], [[ case "$enableval" in m4_bpatsubst([$5],[permit ])) ;; *) AC_MSG_ERROR(Unknown argument to enable/disable $1) ;; dnl Idea for future: generate a URL pointing to dnl "onlinedocs/configopts.html#whatever" esac ]], [^$], [[ case "$enableval" in yes|no) ;; *) AC_MSG_ERROR(Argument to enable/disable $1 must be yes or no) ;; esac ]], [[$5]]), [enable_]m4_bpatsubst([$1],-,_)[=][$2]) m4_undefine([_g_switch])dnl m4_undefine([_g_help])dnl ]) dnl dnl Check for ISO/IEC 9899:1999 "C99" support. dnl dnl --enable-c99 defines _GLIBCXX_USE_C99 dnl --disable-c99 leaves _GLIBCXX_USE_C99 undefined dnl + Usage: GLIBCXX_ENABLE_C99[(DEFAULT)] dnl Where DEFAULT is either `yes' or `no'. dnl + If 'C99' stuff is not available, ignores DEFAULT and sets `no'. dnl AC_DEFUN([GLIBCXX_ENABLE_C99], [ GLIBCXX_ENABLE(c99,$1,,[turns on ISO/IEC 9899:1999 support]) # Test wchar.h for mbstate_t, which is needed for char_traits and fpos # even if C99 support is turned off. AC_CHECK_HEADERS(wchar.h, ac_has_wchar_h=yes, ac_has_wchar_h=no) AC_MSG_CHECKING([for mbstate_t]) AC_TRY_COMPILE([#include ], [mbstate_t teststate;], have_mbstate_t=yes, have_mbstate_t=no) AC_MSG_RESULT($have_mbstate_t) if test x"$have_mbstate_t" = xyes; then AC_DEFINE(HAVE_MBSTATE_T,1,[Define if mbstate_t exists in wchar.h.]) fi if test x"$enable_c99" = x"yes"; then AC_LANG_SAVE AC_LANG_CPLUSPLUS # Check for the existence of functions used if C99 is enabled. AC_MSG_CHECKING([for ISO C99 support in ]) AC_CACHE_VAL(ac_c99_math, [ AC_TRY_COMPILE([#include ], [fpclassify(0.0); isfinite(0.0); isinf(0.0); isnan(0.0); isnormal(0.0); signbit(0.0); isgreater(0.0,0.0); isgreaterequal(0.0,0.0); isless(0.0,0.0); islessequal(0.0,0.0); islessgreater(0.0,0.0); islessgreater(0.0,0.0); isunordered(0.0,0.0); ],[ac_c99_math=yes], [ac_c99_math=no]) ]) AC_MSG_RESULT($ac_c99_math) if test x"$ac_c99_math" = x"yes"; then AC_DEFINE(_GLIBCXX_USE_C99_MATH, 1, [Define if C99 functions or macros in should be imported in in namespace std.]) fi # Check for the existence of complex math functions. # This is necessary even though libstdc++ uses the builtin versions # of these functions, because if the builtin cannot be used, a reference # to the library function is emitted. AC_CHECK_HEADERS(complex.h, ac_has_complex_h=yes, ac_has_complex_h=no) ac_c99_complex=no; if test x"$ac_has_complex_h" = x"yes"; then AC_MSG_CHECKING([for ISO C99 support in ]) AC_TRY_COMPILE([#include ], [typedef __complex__ float float_type; float_type tmpf; cabsf(tmpf); cargf(tmpf); ccosf(tmpf); ccoshf(tmpf); cexpf(tmpf); clogf(tmpf); csinf(tmpf); csinhf(tmpf); csqrtf(tmpf); ctanf(tmpf); ctanhf(tmpf); cpowf(tmpf, tmpf); typedef __complex__ double double_type; double_type tmpd; cabs(tmpd); carg(tmpd); ccos(tmpd); ccosh(tmpd); cexp(tmpd); clog(tmpd); csin(tmpd); csinh(tmpd); csqrt(tmpd); ctan(tmpd); ctanh(tmpd); cpow(tmpd, tmpd); typedef __complex__ long double ld_type; ld_type tmpld; cabsl(tmpld); cargl(tmpld); ccosl(tmpld); ccoshl(tmpld); cexpl(tmpld); clogl(tmpld); csinl(tmpld); csinhl(tmpld); csqrtl(tmpld); ctanl(tmpld); ctanhl(tmpld); cpowl(tmpld, tmpld); ],[ac_c99_complex=yes], [ac_c99_complex=no]) fi AC_MSG_RESULT($ac_c99_complex) if test x"$ac_c99_complex" = x"yes"; then AC_DEFINE(_GLIBCXX_USE_C99_COMPLEX, 1, [Define if C99 functions in should be used in . Using compiler builtins for these functions requires corresponding C99 library functions to be present.]) fi # Check for the existence in of vscanf, et. al. AC_MSG_CHECKING([for ISO C99 support in ]) AC_CACHE_VAL(ac_c99_stdio, [ AC_TRY_COMPILE([#include #include void foo(char* fmt, ...) { va_list args; va_start(args, fmt); vfscanf(stderr, "%i", args); vscanf("%i", args); vsnprintf(fmt, 0, "%i", args); vsscanf(fmt, "%i", args); }], [snprintf("12", 0, "%i");], [ac_c99_stdio=yes], [ac_c99_stdio=no]) ]) AC_MSG_RESULT($ac_c99_stdio) # Check for the existence in of lldiv_t, et. al. AC_MSG_CHECKING([for ISO C99 support in ]) AC_CACHE_VAL(ac_c99_stdlib, [ AC_TRY_COMPILE([#include ], [char* tmp; strtof("gnu", &tmp); strtold("gnu", &tmp); strtoll("gnu", &tmp, 10); strtoull("gnu", &tmp, 10); llabs(10); lldiv(10,1); atoll("10"); _Exit(0); lldiv_t mydivt;],[ac_c99_stdlib=yes], [ac_c99_stdlib=no]) ]) AC_MSG_RESULT($ac_c99_stdlib) # Check for the existence in of wcstoull, WEOF, etc. AC_CHECK_HEADERS(wctype.h, ac_has_wctype_h=yes, ac_has_wctype_h=no) ac_c99_wchar=no; if test x"$ac_has_wchar_h" = xyes && test x"$ac_has_wctype_h" = xyes; then AC_TRY_COMPILE([#include #include wint_t i; long l = WEOF; long j = WCHAR_MIN; long k = WCHAR_MAX; namespace test { using ::btowc; using ::fgetwc; using ::fgetws; using ::fputwc; using ::fputws; using ::fwide; using ::fwprintf; using ::fwscanf; using ::getwc; using ::getwchar; using ::mbrlen; using ::mbrtowc; using ::mbsinit; using ::mbsrtowcs; using ::putwc; using ::putwchar; using ::swprintf; using ::swscanf; using ::ungetwc; using ::vfwprintf; using ::vswprintf; using ::vwprintf; using ::wcrtomb; using ::wcscat; using ::wcschr; using ::wcscmp; using ::wcscoll; using ::wcscpy; using ::wcscspn; using ::wcsftime; using ::wcslen; using ::wcsncat; using ::wcsncmp; using ::wcsncpy; using ::wcspbrk; using ::wcsrchr; using ::wcsrtombs; using ::wcsspn; using ::wcsstr; using ::wcstod; using ::wcstok; using ::wcstol; using ::wcstold; using ::wcstoll; using ::wcstoul; using ::wcstoull; using ::wcsxfrm; using ::wctob; using ::wmemchr; using ::wmemcmp; using ::wmemcpy; using ::wmemmove; using ::wmemset; using ::wprintf; using ::wscanf; } ],[],[ac_c99_wchar=yes], [ac_c99_wchar=no]) # Checks for wide character functions that may not be present. # Injection of these is wrapped with guard macros. # NB: only put functions here, instead of immediately above, if # absolutely necessary. AC_TRY_COMPILE([#include namespace test { using ::vfwscanf; } ], [], [AC_DEFINE(HAVE_VFWSCANF,1, [Defined if vfwscanf exists.])],[]) AC_TRY_COMPILE([#include namespace test { using ::vswscanf; } ], [], [AC_DEFINE(HAVE_VSWSCANF,1, [Defined if vswscanf exists.])],[]) AC_TRY_COMPILE([#include namespace test { using ::vwscanf; } ], [], [AC_DEFINE(HAVE_VWSCANF,1,[Defined if vwscanf exists.])],[]) AC_TRY_COMPILE([#include namespace test { using ::wcstof; } ], [], [AC_DEFINE(HAVE_WCSTOF,1,[Defined if wcstof exists.])],[]) AC_TRY_COMPILE([#include ], [ wint_t t; int i = iswblank(t);], [AC_DEFINE(HAVE_ISWBLANK,1, [Defined if iswblank exists.])],[]) AC_MSG_CHECKING([for ISO C99 support in ]) AC_MSG_RESULT($ac_c99_wchar) fi # Option parsed, now set things appropriately. if test x"$ac_c99_math" = x"no" || test x"$ac_c99_complex" = x"no" || test x"$ac_c99_stdio" = x"no" || test x"$ac_c99_stdlib" = x"no" || test x"$ac_c99_wchar" = x"no"; then enable_c99=no; else AC_DEFINE(_GLIBCXX_USE_C99, 1, [Define if C99 functions or macros from , , , , and can be used or exposed.]) fi AC_LANG_RESTORE fi AC_MSG_CHECKING([for fully enabled ISO C99 support]) AC_MSG_RESULT($enable_c99) ]) dnl dnl Check for ISO/IEC 9899:1999 "C99" support to ISO/IEC DTR 19768 "TR1" dnl facilities in Chapter 8, "C compatibility". dnl AC_DEFUN([GLIBCXX_CHECK_C99_TR1], [ AC_LANG_SAVE AC_LANG_CPLUSPLUS # Check for the existence of complex math functions used # by tr1/complex. AC_CHECK_HEADERS(complex.h, ac_has_complex_h=yes, ac_has_complex_h=no) ac_c99_complex_tr1=no; if test x"$ac_has_complex_h" = x"yes"; then AC_MSG_CHECKING([for ISO C99 support to TR1 in ]) AC_TRY_COMPILE([#include ], [typedef __complex__ float float_type; float_type tmpf; cacosf(tmpf); casinf(tmpf); catanf(tmpf); cacoshf(tmpf); casinhf(tmpf); catanhf(tmpf); typedef __complex__ double double_type; double_type tmpd; cacos(tmpd); casin(tmpd); catan(tmpd); cacosh(tmpd); casinh(tmpd); catanh(tmpd); typedef __complex__ long double ld_type; ld_type tmpld; cacosl(tmpld); casinl(tmpld); catanl(tmpld); cacoshl(tmpld); casinhl(tmpld); catanhl(tmpld); ],[ac_c99_complex_tr1=yes], [ac_c99_complex_tr1=no]) fi AC_MSG_RESULT($ac_c99_complex_tr1) if test x"$ac_c99_complex_tr1" = x"yes"; then AC_DEFINE(_GLIBCXX_USE_C99_COMPLEX_TR1, 1, [Define if C99 functions in should be used in . Using compiler builtins for these functions requires corresponding C99 library functions to be present.]) fi # Check for the existence of functions. AC_MSG_CHECKING([for ISO C99 support to TR1 in ]) AC_CACHE_VAL(ac_c99_ctype_tr1, [ AC_TRY_COMPILE([#include ], [int ch; isblank(ch); ],[ac_c99_ctype_tr1=yes], [ac_c99_ctype_tr1=no]) ]) AC_MSG_RESULT($ac_c99_ctype_tr1) if test x"$ac_c99_ctype_tr1" = x"yes"; then AC_DEFINE(_GLIBCXX_USE_C99_CTYPE_TR1, 1, [Define if C99 functions in should be imported in in namespace std::tr1.]) fi # Check for the existence of functions. AC_CHECK_HEADERS(fenv.h, ac_has_fenv_h=yes, ac_has_fenv_h=no) ac_c99_fenv_tr1=no; if test x"$ac_has_fenv_h" = x"yes"; then AC_MSG_CHECKING([for ISO C99 support to TR1 in ]) AC_TRY_COMPILE([#include ], [int except, mode; fexcept_t* pflag; fenv_t* penv; feclearexcept(except); fegetexceptflag(pflag, except); feraiseexcept(except); fesetexceptflag(pflag, except); fetestexcept(except); fegetround(); fesetround(mode); fegetenv(penv); feholdexcept(penv); fesetenv(penv); feupdateenv(penv); ],[ac_c99_fenv_tr1=yes], [ac_c99_fenv_tr1=no]) fi AC_MSG_RESULT($ac_c99_fenv_tr1) if test x"$ac_c99_fenv_tr1" = x"yes"; then AC_DEFINE(_GLIBCXX_USE_C99_FENV_TR1, 1, [Define if C99 functions in should be imported in in namespace std::tr1.]) fi AC_LANG_RESTORE ]) dnl dnl Check for what type of C headers to use. dnl dnl --enable-cheaders= [does stuff]. dnl --disable-cheaders [does not do anything, really]. dnl + Usage: GLIBCXX_ENABLE_CHEADERS[(DEFAULT)] dnl Where DEFAULT is either `c' or `c_std'. dnl AC_DEFUN([GLIBCXX_ENABLE_CHEADERS], [ GLIBCXX_ENABLE(cheaders,$1,[=KIND], [construct "C" headers for g++], [permit c|c_std]) AC_MSG_NOTICE("C" header strategy set to $enable_cheaders) C_INCLUDE_DIR='${glibcxx_srcdir}/include/'$enable_cheaders AC_SUBST(C_INCLUDE_DIR) GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C, test $enable_cheaders = c) GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C_STD, test $enable_cheaders = c_std) GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_COMPATIBILITY, test $c_compatibility = yes) ]) dnl dnl Check for which locale library to use. The choice is mapped to dnl a subdirectory of config/locale. dnl dnl Default is generic. dnl AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [ AC_MSG_CHECKING([for C locale to use]) GLIBCXX_ENABLE(clocale,auto,[@<:@=MODEL@:>@], [use MODEL for target locale package], [permit generic|gnu|ieee_1003.1-2001|yes|no|auto]) # If they didn't use this option switch, or if they specified --enable # with no specific model, we'll have to look for one. If they # specified --disable (???), do likewise. if test $enable_clocale = no || test $enable_clocale = yes; then enable_clocale=auto fi # Either a known package, or "auto" enable_clocale_flag=$enable_clocale # Probe for locale support if no specific model is specified. # Default to "generic". if test $enable_clocale_flag = auto; then case ${target_os} in linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu) AC_EGREP_CPP([_GLIBCXX_ok], [ #include #if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2) _GLIBCXX_ok #endif ], enable_clocale_flag=gnu, enable_clocale_flag=generic) # Test for bugs early in glibc-2.2.x series if test $enable_clocale_flag = gnu; then AC_TRY_RUN([ #define _GNU_SOURCE 1 #include #include #if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ > 2) extern __typeof(newlocale) __newlocale; extern __typeof(duplocale) __duplocale; extern __typeof(strcoll_l) __strcoll_l; #endif int main() { const char __one[] = "Äuglein Augmen"; const char __two[] = "Äuglein"; int i; int j; __locale_t loc; __locale_t loc_dup; loc = __newlocale(1 << LC_ALL, "de_DE", 0); loc_dup = __duplocale(loc); i = __strcoll_l(__one, __two, loc); j = __strcoll_l(__one, __two, loc_dup); return 0; } ], [enable_clocale_flag=gnu],[enable_clocale_flag=generic], [enable_clocale_flag=generic]) fi # ... at some point put __strxfrm_l tests in as well. ;; darwin* | freebsd*) enable_clocale_flag=darwin ;; *) enable_clocale_flag=generic ;; esac fi # Deal with gettext issues. Default to not using it (=no) until we detect # support for it later. Let the user turn it off via --e/d, but let that # default to on for easier handling. USE_NLS=no AC_ARG_ENABLE(nls, AC_HELP_STRING([--enable-nls],[use Native Language Support (default)]), [], [enable_nls=yes]) # Set configure bits for specified locale package case ${enable_clocale_flag} in generic) AC_MSG_RESULT(generic) CLOCALE_H=config/locale/generic/c_locale.h CLOCALE_CC=config/locale/generic/c_locale.cc CCODECVT_CC=config/locale/generic/codecvt_members.cc CCOLLATE_CC=config/locale/generic/collate_members.cc CCTYPE_CC=config/locale/generic/ctype_members.cc CMESSAGES_H=config/locale/generic/messages_members.h CMESSAGES_CC=config/locale/generic/messages_members.cc CMONEY_CC=config/locale/generic/monetary_members.cc CNUMERIC_CC=config/locale/generic/numeric_members.cc CTIME_H=config/locale/generic/time_members.h CTIME_CC=config/locale/generic/time_members.cc CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h ;; darwin) AC_MSG_RESULT(darwin or freebsd) CLOCALE_H=config/locale/generic/c_locale.h CLOCALE_CC=config/locale/generic/c_locale.cc CCODECVT_CC=config/locale/generic/codecvt_members.cc CCOLLATE_CC=config/locale/generic/collate_members.cc CCTYPE_CC=config/locale/darwin/ctype_members.cc CMESSAGES_H=config/locale/generic/messages_members.h CMESSAGES_CC=config/locale/generic/messages_members.cc CMONEY_CC=config/locale/generic/monetary_members.cc CNUMERIC_CC=config/locale/generic/numeric_members.cc CTIME_H=config/locale/generic/time_members.h CTIME_CC=config/locale/generic/time_members.cc CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h ;; gnu) AC_MSG_RESULT(gnu) # Declare intention to use gettext, and add support for specific # languages. # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT ALL_LINGUAS="de fr" # Don't call AM-GNU-GETTEXT here. Instead, assume glibc. AC_CHECK_PROG(check_msgfmt, msgfmt, yes, no) if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then USE_NLS=yes fi # Export the build objects. for ling in $ALL_LINGUAS; do \ glibcxx_MOFILES="$glibcxx_MOFILES $ling.mo"; \ glibcxx_POFILES="$glibcxx_POFILES $ling.po"; \ done AC_SUBST(glibcxx_MOFILES) AC_SUBST(glibcxx_POFILES) CLOCALE_H=config/locale/gnu/c_locale.h CLOCALE_CC=config/locale/gnu/c_locale.cc CCODECVT_CC=config/locale/gnu/codecvt_members.cc CCOLLATE_CC=config/locale/gnu/collate_members.cc CCTYPE_CC=config/locale/gnu/ctype_members.cc CMESSAGES_H=config/locale/gnu/messages_members.h CMESSAGES_CC=config/locale/gnu/messages_members.cc CMONEY_CC=config/locale/gnu/monetary_members.cc CNUMERIC_CC=config/locale/gnu/numeric_members.cc CTIME_H=config/locale/gnu/time_members.h CTIME_CC=config/locale/gnu/time_members.cc CLOCALE_INTERNAL_H=config/locale/gnu/c++locale_internal.h ;; ieee_1003.1-2001) AC_MSG_RESULT(IEEE 1003.1) CLOCALE_H=config/locale/ieee_1003.1-2001/c_locale.h CLOCALE_CC=config/locale/ieee_1003.1-2001/c_locale.cc CCODECVT_CC=config/locale/generic/codecvt_members.cc CCOLLATE_CC=config/locale/generic/collate_members.cc CCTYPE_CC=config/locale/generic/ctype_members.cc CMESSAGES_H=config/locale/ieee_1003.1-2001/messages_members.h CMESSAGES_CC=config/locale/ieee_1003.1-2001/messages_members.cc CMONEY_CC=config/locale/generic/monetary_members.cc CNUMERIC_CC=config/locale/generic/numeric_members.cc CTIME_H=config/locale/generic/time_members.h CTIME_CC=config/locale/generic/time_members.cc CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h ;; esac # This is where the testsuite looks for locale catalogs, using the # -DLOCALEDIR define during testsuite compilation. glibcxx_localedir=${glibcxx_builddir}/po/share/locale AC_SUBST(glibcxx_localedir) # A standalone libintl (e.g., GNU libintl) may be in use. if test $USE_NLS = yes; then AC_CHECK_HEADERS([libintl.h], [], USE_NLS=no) AC_SEARCH_LIBS(gettext, intl, [], USE_NLS=no) fi if test $USE_NLS = yes; then AC_DEFINE(_GLIBCXX_USE_NLS, 1, [Define if NLS translations are to be used.]) fi AC_SUBST(USE_NLS) AC_SUBST(CLOCALE_H) AC_SUBST(CMESSAGES_H) AC_SUBST(CCODECVT_CC) AC_SUBST(CCOLLATE_CC) AC_SUBST(CCTYPE_CC) AC_SUBST(CMESSAGES_CC) AC_SUBST(CMONEY_CC) AC_SUBST(CNUMERIC_CC) AC_SUBST(CTIME_H) AC_SUBST(CTIME_CC) AC_SUBST(CLOCALE_CC) AC_SUBST(CLOCALE_INTERNAL_H) ]) dnl dnl Check for which std::allocator base class to use. The choice is dnl mapped from a subdirectory of include/ext. dnl dnl Default is new. dnl AC_DEFUN([GLIBCXX_ENABLE_ALLOCATOR], [ AC_MSG_CHECKING([for std::allocator base class]) GLIBCXX_ENABLE(libstdcxx-allocator,auto,[=KIND], [use KIND for target std::allocator base], [permit new|malloc|mt|bitmap|pool|yes|no|auto]) # If they didn't use this option switch, or if they specified --enable # with no specific model, we'll have to look for one. If they # specified --disable (???), do likewise. if test $enable_libstdcxx_allocator = no || test $enable_libstdcxx_allocator = yes; then enable_libstdcxx_allocator=auto fi # Either a known package, or "auto". Auto implies the default choice # for a particular platform. enable_libstdcxx_allocator_flag=$enable_libstdcxx_allocator # Probe for host-specific support if no specific model is specified. # Default to "new". if test $enable_libstdcxx_allocator_flag = auto; then case ${target_os} in linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu) enable_libstdcxx_allocator_flag=new ;; *) enable_libstdcxx_allocator_flag=new ;; esac fi AC_MSG_RESULT($enable_libstdcxx_allocator_flag) # Set configure bits for specified locale package case ${enable_libstdcxx_allocator_flag} in bitmap) ALLOCATOR_H=config/allocator/bitmap_allocator_base.h ALLOCATOR_NAME=__gnu_cxx::bitmap_allocator ;; malloc) ALLOCATOR_H=config/allocator/malloc_allocator_base.h ALLOCATOR_NAME=__gnu_cxx::malloc_allocator ;; mt) ALLOCATOR_H=config/allocator/mt_allocator_base.h ALLOCATOR_NAME=__gnu_cxx::__mt_alloc ;; new) ALLOCATOR_H=config/allocator/new_allocator_base.h ALLOCATOR_NAME=__gnu_cxx::new_allocator ;; pool) ALLOCATOR_H=config/allocator/pool_allocator_base.h ALLOCATOR_NAME=__gnu_cxx::__pool_alloc ;; esac AC_SUBST(ALLOCATOR_H) AC_SUBST(ALLOCATOR_NAME) ]) dnl dnl Check for whether the Boost-derived checks should be turned on. dnl dnl --enable-concept-checks turns them on. dnl --disable-concept-checks leaves them off. dnl + Usage: GLIBCXX_ENABLE_CONCEPT_CHECKS[(DEFAULT)] dnl Where DEFAULT is either `yes' or `no'. dnl AC_DEFUN([GLIBCXX_ENABLE_CONCEPT_CHECKS], [ GLIBCXX_ENABLE(concept-checks,$1,,[use Boost-derived template checks]) if test $enable_concept_checks = yes; then AC_DEFINE(_GLIBCXX_CONCEPT_CHECKS, 1, [Define to use concept checking code from the boost libraries.]) fi ]) dnl dnl Check for which I/O library to use: stdio, or something specific. dnl dnl Default is stdio. dnl AC_DEFUN([GLIBCXX_ENABLE_CSTDIO], [ AC_MSG_CHECKING([for underlying I/O to use]) GLIBCXX_ENABLE(cstdio,stdio,[=PACKAGE], [use target-specific I/O package], [permit stdio]) # Now that libio has been removed, you can have any color you want as long # as it's black. This is one big no-op until other packages are added, but # showing the framework never hurts. case ${enable_cstdio} in stdio) CSTDIO_H=config/io/c_io_stdio.h BASIC_FILE_H=config/io/basic_file_stdio.h BASIC_FILE_CC=config/io/basic_file_stdio.cc AC_MSG_RESULT(stdio) ;; esac AC_SUBST(CSTDIO_H) AC_SUBST(BASIC_FILE_H) AC_SUBST(BASIC_FILE_CC) ]) dnl dnl Check for "unusual" flags to pass to the compiler while building. dnl dnl --enable-cxx-flags='-foo -bar -baz' is a general method for passing dnl experimental flags such as -fpch, -fIMI, -Dfloat=char, etc. dnl --disable-cxx-flags passes nothing. dnl + See http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00131.html dnl http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00284.html dnl http://gcc.gnu.org/ml/libstdc++/2000-q1/msg00035.html dnl + Usage: GLIBCXX_ENABLE_CXX_FLAGS(default flags) dnl If "default flags" is an empty string, the effect is the same dnl as --disable or --enable=no. dnl AC_DEFUN([GLIBCXX_ENABLE_CXX_FLAGS], [dnl AC_MSG_CHECKING([for extra compiler flags for building]) GLIBCXX_ENABLE(cxx-flags,$1,[=FLAGS], [pass compiler FLAGS when building library], [case "x$enable_cxx_flags" in xno | x) enable_cxx_flags= ;; x-*) ;; *) AC_MSG_ERROR(_g_switch needs compiler flags as arguments) ;; esac]) # Run through flags (either default or command-line) and set anything # extra (e.g., #defines) that must accompany particular g++ options. if test -n "$enable_cxx_flags"; then for f in $enable_cxx_flags; do case "$f" in -fhonor-std) ;; -*) ;; *) # and we're trying to pass /what/ exactly? AC_MSG_ERROR([compiler flags start with a -]) ;; esac done fi EXTRA_CXX_FLAGS="$enable_cxx_flags" AC_MSG_RESULT($EXTRA_CXX_FLAGS) AC_SUBST(EXTRA_CXX_FLAGS) ]) dnl dnl Check to see if debugging libraries are to be built. dnl dnl --enable-libstdcxx-debug dnl builds a separate set of debugging libraries in addition to the dnl normal (shared, static) libstdc++ binaries. dnl dnl --disable-libstdcxx-debug dnl builds only one (non-debug) version of libstdc++. dnl dnl --enable-libstdcxx-debug-flags=FLAGS dnl iff --enable-debug == yes, then use FLAGS to build the debug library. dnl dnl + Usage: GLIBCXX_ENABLE_DEBUG[(DEFAULT)] dnl Where DEFAULT is either `yes' or `no'. dnl AC_DEFUN([GLIBCXX_ENABLE_DEBUG], [ AC_MSG_CHECKING([for additional debug build]) GLIBCXX_ENABLE(libstdcxx-debug,$1,,[build extra debug library]) AC_MSG_RESULT($enable_libstdcxx_debug) GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_DEBUG, test $enable_libstdcxx_debug = yes) ]) dnl dnl Check for explicit debug flags. dnl dnl --enable-libstdcxx-debug-flags='-O1' dnl is a general method for passing flags to be used when dnl building debug libraries with --enable-debug. dnl dnl --disable-libstdcxx-debug-flags does nothing. dnl + Usage: GLIBCXX_ENABLE_DEBUG_FLAGS(default flags) dnl If "default flags" is an empty string, the effect is the same dnl as --disable or --enable=no. dnl AC_DEFUN([GLIBCXX_ENABLE_DEBUG_FLAGS], [ GLIBCXX_ENABLE(libstdcxx-debug-flags,[$1],[=FLAGS], [pass compiler FLAGS when building debug library], [case "x$enable_libstdcxx_debug_flags" in xno | x) enable_libstdcxx_debug_flags= ;; x-*) ;; *) AC_MSG_ERROR(_g_switch needs compiler flags as arguments) ;; esac]) # Option parsed, now set things appropriately DEBUG_FLAGS="$enable_libstdcxx_debug_flags" AC_SUBST(DEBUG_FLAGS) AC_MSG_NOTICE([Debug build flags set to $DEBUG_FLAGS]) ]) dnl dnl Check if the user only wants a freestanding library implementation. dnl dnl --disable-hosted-libstdcxx will turn off most of the library build, dnl installing only the headers required by [17.4.1.3] and the language dnl support library. More than that will be built (to keep the Makefiles dnl conveniently clean), but not installed. dnl dnl Sets: dnl is_hosted (yes/no) dnl dnl Defines: dnl _GLIBCXX_HOSTED (always defined, either to 1 or 0) dnl AC_DEFUN([GLIBCXX_ENABLE_HOSTED], [ AC_ARG_ENABLE([hosted-libstdcxx], AC_HELP_STRING([--disable-hosted-libstdcxx], [only build freestanding C++ runtime support]),, [case "$host" in arm*-*-symbianelf*) enable_hosted_libstdcxx=no ;; *) enable_hosted_libstdcxx=yes ;; esac]) if test "$enable_hosted_libstdcxx" = no; then AC_MSG_NOTICE([Only freestanding libraries will be built]) is_hosted=no hosted_define=0 enable_abi_check=no enable_libstdcxx_pch=no else is_hosted=yes hosted_define=1 fi GLIBCXX_CONDITIONAL(GLIBCXX_HOSTED, test $is_hosted = yes) AC_DEFINE_UNQUOTED(_GLIBCXX_HOSTED, $hosted_define, [Define to 1 if a full hosted library is built, or 0 if freestanding.]) ]) dnl dnl Check for template specializations for the 'long long' type. dnl The result determines only whether 'long long' I/O is enabled; things dnl like numeric_limits<> specializations are always available. dnl dnl --enable-long-long defines _GLIBCXX_USE_LONG_LONG dnl --disable-long-long leaves _GLIBCXX_USE_LONG_LONG undefined dnl + Usage: GLIBCXX_ENABLE_LONG_LONG[(DEFAULT)] dnl Where DEFAULT is either `yes' or `no'. dnl AC_DEFUN([GLIBCXX_ENABLE_LONG_LONG], [ GLIBCXX_ENABLE(long-long,$1,,[enable template specializations for 'long long']) if test $enable_long_long = yes; then AC_DEFINE(_GLIBCXX_USE_LONG_LONG, 1, [Define if code specialized for long long should be used.]) fi AC_MSG_CHECKING([for enabled long long specializations]) AC_MSG_RESULT([$enable_long_long]) ]) dnl dnl Check for template specializations for the 'wchar_t' type. dnl dnl --enable-wchar_t defines _GLIBCXX_USE_WCHAR_T dnl --disable-wchar_t leaves _GLIBCXX_USE_WCHAR_T undefined dnl + Usage: GLIBCXX_ENABLE_WCHAR_T[(DEFAULT)] dnl Where DEFAULT is either `yes' or `no'. dnl dnl Necessary support (probed along with C99 support) must also be present. dnl AC_DEFUN([GLIBCXX_ENABLE_WCHAR_T], [ GLIBCXX_ENABLE(wchar_t,$1,,[enable template specializations for 'wchar_t']) if test x"$ac_c99_wchar" = x"yes" && test x"$enable_wchar_t" = x"yes"; then AC_DEFINE(_GLIBCXX_USE_WCHAR_T, 1, [Define if code specialized for wchar_t should be used.]) fi AC_MSG_CHECKING([for enabled wchar_t specializations]) AC_MSG_RESULT([$enable_wchar_t]) ]) dnl dnl Check to see if building and using a C++ precompiled header can be done. dnl dnl --enable-libstdcxx-pch=yes dnl default, this shows intent to use stdc++.h.gch If it looks like it dnl may work, after some light-hearted attempts to puzzle out compiler dnl support, flip bits on in include/Makefile.am dnl dnl --disable-libstdcxx-pch dnl turns off attempts to use or build stdc++.h.gch. dnl dnl Substs: dnl glibcxx_PCHFLAGS dnl AC_DEFUN([GLIBCXX_ENABLE_PCH], [ GLIBCXX_ENABLE(libstdcxx-pch,$1,,[build pre-compiled libstdc++ headers]) if test $enable_libstdcxx_pch = yes; then AC_CACHE_CHECK([for compiler with PCH support], [glibcxx_cv_prog_CXX_pch], [ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated" AC_LANG_SAVE AC_LANG_CPLUSPLUS echo '#include ' > conftest.h if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \ -o conftest.h.gch 1>&5 2>&1 && echo '#error "pch failed"' > conftest.h && echo '#include "conftest.h"' > conftest.cc && $CXX -c $CXXFLAGS $CPPFLAGS conftest.cc 1>&5 2>&1 ; then glibcxx_cv_prog_CXX_pch=yes else glibcxx_cv_prog_CXX_pch=no fi rm -f conftest* CXXFLAGS=$ac_save_CXXFLAGS AC_LANG_RESTORE ]) enable_libstdcxx_pch=$glibcxx_cv_prog_CXX_pch fi AC_MSG_CHECKING([for enabled PCH]) AC_MSG_RESULT([$enable_libstdcxx_pch]) GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_PCH, test $enable_libstdcxx_pch = yes) if test $enable_libstdcxx_pch = yes; then glibcxx_PCHFLAGS="-include bits/stdc++.h" else glibcxx_PCHFLAGS="" fi AC_SUBST(glibcxx_PCHFLAGS) ]) dnl dnl Check for exception handling support. If an explicit enable/disable dnl sjlj exceptions is given, we don't have to detect. Otherwise the dnl target may or may not support call frame exceptions. dnl dnl --enable-sjlj-exceptions forces the use of builtin setjmp. dnl --disable-sjlj-exceptions forces the use of call frame unwinding. dnl Neither one forces an attempt at detection. dnl dnl Defines: dnl _GLIBCXX_SJLJ_EXCEPTIONS if the compiler is configured for it dnl AC_DEFUN([GLIBCXX_ENABLE_SJLJ_EXCEPTIONS], [ AC_MSG_CHECKING([for exception model to use]) AC_LANG_SAVE AC_LANG_CPLUSPLUS GLIBCXX_ENABLE(sjlj-exceptions,auto,, [force use of builtin_setjmp for exceptions], [permit yes|no|auto]) if test $enable_sjlj_exceptions = auto; then # Botheration. Now we've got to detect the exception model. Link tests # against libgcc.a are problematic since we've not been given proper -L # bits for single-tree newlib and libgloss. # # Fake what AC_TRY_COMPILE does. XXX Look at redoing this new-style. cat > conftest.$ac_ext << EOF [#]line __oline__ "configure" struct S { ~S(); }; void bar(); void foo() { S s; bar(); } EOF old_CXXFLAGS="$CXXFLAGS" CXXFLAGS=-S if AC_TRY_EVAL(ac_compile); then if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then enable_sjlj_exceptions=yes elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then enable_sjlj_exceptions=no elif grep __cxa_end_cleanup conftest.s >/dev/null 2>&1 ; then enable_sjlj_exceptions=no fi fi CXXFLAGS="$old_CXXFLAGS" rm -f conftest* fi # This is a tad weird, for hysterical raisins. We have to map # enable/disable to two different models. case $enable_sjlj_exceptions in yes) AC_DEFINE(_GLIBCXX_SJLJ_EXCEPTIONS, 1, [Define if the compiler is configured for setjmp/longjmp exceptions.]) ac_exception_model_name=sjlj ;; no) ac_exception_model_name="call frame" ;; *) AC_MSG_ERROR([unable to detect exception model]) ;; esac AC_LANG_RESTORE AC_MSG_RESULT($ac_exception_model_name) ]) dnl dnl Add version tags to symbols in shared library (or not), additionally dnl marking other symbols as private/local (or not). dnl dnl --enable-symvers=style adds a version script to the linker call when dnl creating the shared library. The choice of version script is dnl controlled by 'style'. dnl --disable-symvers does not. dnl + Usage: GLIBCXX_ENABLE_SYMVERS[(DEFAULT)] dnl Where DEFAULT is either 'yes' or 'no'. Passing `yes' tries to dnl choose a default style based on linker characteristics. Passing dnl 'no' disables versioning. dnl AC_DEFUN([GLIBCXX_ENABLE_SYMVERS], [ GLIBCXX_ENABLE(symvers,$1,[=STYLE], [enables symbol versioning of the shared library], [permit yes|no|gnu|gnu-versioned-namespace|darwin|darwin-export]) # If we never went through the GLIBCXX_CHECK_LINKER_FEATURES macro, then we # don't know enough about $LD to do tricks... AC_REQUIRE([GLIBCXX_CHECK_LINKER_FEATURES]) # Turn a 'yes' into a suitable default. if test x$enable_symvers = xyes ; then if test $enable_shared = no || test "x$LD" = x ; then enable_symvers=no else if test $with_gnu_ld = yes ; then enable_symvers=gnu else case ${target_os} in darwin*) enable_symvers=darwin ;; *) enable_symvers=no ;; esac fi fi fi # Check to see if 'darwin' or 'darwin-export' can win. if test x$enable_symvers = xdarwin-export ; then enable_symvers=darwin fi # Check to see if 'gnu' can win. if test $enable_symvers = gnu || test $enable_symvers = gnu-versioned-namespace; then # Check to see if libgcc_s exists, indicating that shared libgcc is possible. AC_MSG_CHECKING([for shared libgcc]) ac_save_CFLAGS="$CFLAGS" CFLAGS=' -lgcc_s' AC_TRY_LINK(, [return 0;], glibcxx_shared_libgcc=yes, glibcxx_shared_libgcc=no) CFLAGS="$ac_save_CFLAGS" if test $glibcxx_shared_libgcc = no; then cat > conftest.c <&1 >/dev/null \ | sed -n 's/^.* -lgcc_s\([^ ]*\) .*$/\1/p'` changequote([,])dnl rm -f conftest.c conftest.so if test x${glibcxx_libgcc_s_suffix+set} = xset; then CFLAGS=" -lgcc_s$glibcxx_libgcc_s_suffix" AC_TRY_LINK(, [return 0;], glibcxx_shared_libgcc=yes) CFLAGS="$ac_save_CFLAGS" fi fi AC_MSG_RESULT($glibcxx_shared_libgcc) # For GNU ld, we need at least this version. The format is described in # GLIBCXX_CHECK_LINKER_FEATURES above. glibcxx_min_gnu_ld_version=21400 # If no shared libgcc, can't win. if test $glibcxx_shared_libgcc != yes; then AC_MSG_WARN([=== You have requested GNU symbol versioning, but]) AC_MSG_WARN([=== you are not building a shared libgcc_s.]) AC_MSG_WARN([=== Symbol versioning will be disabled.]) enable_symvers=no elif test $with_gnu_ld != yes ; then # just fail for now AC_MSG_WARN([=== You have requested GNU symbol versioning, but]) AC_MSG_WARN([=== you are not using the GNU linker.]) AC_MSG_WARN([=== Symbol versioning will be disabled.]) enable_symvers=no elif test $glibcxx_gnu_ld_version -lt $glibcxx_min_gnu_ld_version ; then # The right tools, the right setup, but too old. Fallbacks? AC_MSG_WARN(=== Linker version $glibcxx_gnu_ld_version is too old for) AC_MSG_WARN(=== full symbol versioning support in this release of GCC.) AC_MSG_WARN(=== You would need to upgrade your binutils to version) AC_MSG_WARN(=== $glibcxx_min_gnu_ld_version or later and rebuild GCC.) AC_MSG_WARN([=== Symbol versioning will be disabled.]) enable_symvers=no fi fi # Everything parsed; figure out what file to use. case $enable_symvers in no) SYMVER_FILE=config/abi/pre/none.ver ;; gnu) SYMVER_FILE=config/abi/pre/gnu.ver AC_DEFINE(_GLIBCXX_SYMVER_GNU, 1, [Define to use GNU versioning in the shared library.]) ;; gnu-versioned-namespace) SYMVER_FILE=config/abi/pre/gnu-versioned-namespace.ver AC_DEFINE(_GLIBCXX_SYMVER_GNU_NAMESPACE, 1, [Define to use GNU namespace versioning in the shared library.]) ;; darwin) SYMVER_FILE=config/abi/pre/gnu.ver AC_DEFINE(_GLIBCXX_SYMVER_DARWIN, 1, [Define to use darwin versioning in the shared library.]) ;; esac if test x$enable_symvers != xno ; then AC_DEFINE(_GLIBCXX_SYMVER, 1, [Define to use symbol versioning in the shared library.]) fi AC_SUBST(SYMVER_FILE) AC_SUBST(port_specific_symbol_files) GLIBCXX_CONDITIONAL(ENABLE_SYMVERS, test $enable_symvers != no) GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_GNU, test $enable_symvers = gnu) GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_GNU_NAMESPACE, test $enable_symvers = gnu-versioned-namespace) GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_DARWIN, test $enable_symvers = darwin) AC_MSG_NOTICE(versioning on shared library symbols is $enable_symvers) # Now, set up compatibility support, if any. # In addition, need this to deal with std::size_t mangling in # src/compatibility.cc. In a perfect world, could use # typeid(std::size_t).name()[0] to do direct substitution. AC_MSG_CHECKING([for size_t as unsigned int]) ac_save_CFLAGS="$CFLAGS" CFLAGS="-Werror" AC_TRY_COMPILE(, [__SIZE_TYPE__* stp; unsigned int* uip; stp = uip;], [glibcxx_size_t_is_i=yes], [glibcxx_size_t_is_i=no]) CFLAGS=$ac_save_CFLAGS if test "$glibcxx_size_t_is_i" = yes; then AC_DEFINE(_GLIBCXX_SIZE_T_IS_UINT, 1, [Define if size_t is unsigned int.]) fi AC_MSG_RESULT([$glibcxx_size_t_is_i]) AC_MSG_CHECKING([for ptrdiff_t as int]) ac_save_CFLAGS="$CFLAGS" CFLAGS="-Werror" AC_TRY_COMPILE(, [__PTRDIFF_TYPE__* ptp; int* ip; ptp = ip;], [glibcxx_ptrdiff_t_is_i=yes], [glibcxx_ptrdiff_t_is_i=no]) CFLAGS=$ac_save_CFLAGS if test "$glibcxx_ptrdiff_t_is_i" = yes; then AC_DEFINE(_GLIBCXX_PTRDIFF_T_IS_INT, 1, [Define if ptrdiff_t is int.]) fi AC_MSG_RESULT([$glibcxx_ptrdiff_t_is_i]) ]) dnl dnl Setup to use the gcc gthr.h thread-specific memory and mutex model. dnl We must stage the required headers so that they will be installed dnl with the library (unlike libgcc, the STL implementation is provided dnl solely within headers). Since we must not inject random user-space dnl macro names into user-provided C++ code, we first stage into -in dnl and process to with an output command. The reason for a two- dnl stage process here is to correctly handle $srcdir!=$objdir without dnl having to write complex code (the sed commands to clean the macro dnl namespace are complex and fragile enough as it is). We must also dnl add a relative path so that -I- is supported properly. dnl dnl Substs: dnl glibcxx_thread_h dnl dnl Defines: dnl HAVE_GTHR_DEFAULT dnl AC_DEFUN([GLIBCXX_ENABLE_THREADS], [ AC_MSG_CHECKING([for thread model used by GCC]) target_thread_file=`$CXX -v 2>&1 | sed -n 's/^Thread model: //p'` AC_MSG_RESULT([$target_thread_file]) if test $target_thread_file != single; then AC_DEFINE(HAVE_GTHR_DEFAULT, 1, [Define if gthr-default.h exists (meaning that threading support is enabled).]) fi glibcxx_thread_h=gthr-$target_thread_file.h dnl Check for __GTHREADS define. gthread_file=${toplevel_srcdir}/gcc/${glibcxx_thread_h} if grep __GTHREADS $gthread_file >/dev/null 2>&1 ; then enable_thread=yes else enable_thread=no fi AC_SUBST(glibcxx_thread_h) ]) # Check whether LC_MESSAGES is available in . # Ulrich Drepper , 1995. # # This file file be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. # serial 1 AC_DEFUN([AC_LC_MESSAGES], [ AC_CHECK_HEADER(locale.h, [ AC_CACHE_CHECK([for LC_MESSAGES], ac_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], ac_cv_val_LC_MESSAGES=yes, ac_cv_val_LC_MESSAGES=no)]) if test $ac_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if LC_MESSAGES is available in .]) fi ]) ]) # Macros from the top-level gcc directory. m4_include([../config/tls.m4])