This interface encapsulates the GSS-API security context and provides * the security services ({@link #wrap(byte[],int,int,org.ietf.jgss.MessageProp)}, * {@link #unwrap(byte[],int,int,org.ietf.jgss.MessageProp)}, {@link * #getMIC(byte[],int,int,org.ietf.jgss.MessageProp)}, {@link * #verifyMIC(byte[],int,int,byte[],int,int,org.ietf.jgss.MessageProp)}) that * are available over the context. Security contexts are established * between peers using locally acquired credentials. Multiple contexts * may exist simultaneously between a pair of peers, using the same or * different set of credentials. GSS-API functions in a manner * independent of the underlying transport protocol and depends on its * calling application to transport its tokens between peers.
* *Before the context establishment phase is initiated, the context * initiator may request specific characteristics desired of the * established context. These can be set using the set methods. After * the context is established, the caller can check the actual * characteristic and services offered by the context using the query * methods.
* *The context establishment phase begins with the first call to the * init method by the context initiator. During this phase the * {@link #initSecContext(byte[],int,int)} and {@link * #acceptSecContext(byte[],int,int)} methods will produce GSS-API * authentication tokens which the calling application needs to send to * its peer. If an error occurs at any point, an exception will get * thrown and the code will start executing in a catch block. If not, * the normal flow of code continues and the application can make a call * to the {@link #isEstablished()} method. If this method returns false it * indicates that a token is needed from its peer in order to continue * the context establishment phase. A return value of true signals that * the local end of the context is established. This may still require * that a token be sent to the peer, if one is produced by GSS-API. * During the context establishment phase, the {@link #isProtReady()} * method may be called to determine if the context can be used for the * per-message operations. This allows applications to use per-message * operations on contexts which aren't fully established.
* *After the context has been established or the {@link #isProtReady()}
* method returns true, the query routines can be invoked to
* determine the actual characteristics and services of the established
* context. The application can also start using the per-message methods
* of {@link #wrap(byte[],int,int,org.ietf.jgss.MessageProp)} and
* {@link #getMIC(byte[],int,int,org.ietf.jgss.MessageProp)} to obtain
* cryptographic operations on application supplied data.
When the context is no longer needed, the application should call * {@link dispose()} to release any system resources the context may be * using.
* *
GSSManager mgr = GSSManager.getInstance();
// start by creating the name for a service entity
GSSName targetName = mgr.createName("service@host",
GSSName.NT_HOSTBASED_SERVICE);
// create a context using default credentials for the above entity
// and the implementation specific default mechanism
GSSContext context = mgr.createContext(targetName,
null, // default mechanism
null, // default credentials
GSSContext.INDEFINITE_LIFETIME);
// set desired context options - all others are false by default
context.requestConf(true);
context.requestMutualAuth(true);
context.requestReplayDet(true);
context.requestSequenceDet(true);
// establish a context between peers - using byte arrays
byte []inTok = new byte[0];
try
{
do
{
byte[] outTok = context.initSecContext(inTok, 0,
inTok.length);
// send the token if present
if (outTok != null)
sendToken(outTok);
// check if we should expect more tokens
if (context.isEstablished())
break;
// another token expected from peer
inTok = readToken();
}
while (true);
}
catch (GSSException e)
{
print("GSSAPI error: " + e.getMessage());
}
// display context information
print("Remaining lifetime in seconds = " + context.getLifetime());
print("Context mechanism = " + context.getMech().toString());
print("Initiator = " + context.getSrcName().toString());
print("Acceptor = " + context.getTargName().toString());
if (context.getConfState())
print("Confidentiality security service available");
if (context.getIntegState())
print("Integrity security service available");
// perform wrap on an application supplied message, appMsg,
// using QOP = 0, and requesting privacy service
byte[] appMsg ...
MessageProp mProp = new MessageProp(0, true);
byte[] tok = context.wrap(appMsg, 0, appMsg.length, mProp);
if (mProp.getPrivacy())
print("Message protected with privacy.");
sendToken(tok);
// release the local-end of the context
context.dispose();
*
*/
public interface GSSContext
{
// Constants.
// -------------------------------------------------------------------------
/**
* A lifetime constant representing the default context lifetime.
*/
int DEFAULT_LIFETIME = 0;
/**
* A lifetime constant representing indefinite context lifetime.
*/
int INDEFINITE_LIFETIME = Integer.MAX_VALUE;
// Methods.
// -------------------------------------------------------------------------
/**
* Called by the context initiator to start the context creation
* process. This is equivalent to the stream based method except that
* the token buffers are handled as byte arrays instead of using stream
* objects. This method may return an output token which the
* application will need to send to the peer for processing by the
* accept call. Typically, the application would do so by calling the
* {@link OutputStream#flush()} method on an OutputStream that
* encapsulates the connection between the two peers. The application
* can call {@link #isEstablished()} to determine if the context
* establishment phase is complete for this peer. A return value of
* false from {@link #isEstablished()} indicates that more
* tokens are expected to be supplied to the initSecContext() method. Note
* that it is possible that the initSecContext() method return a token for
* the peer, and {@link #isEstablished()} to return true also.
* This indicates that the token needs to be sent to the peer, but the local
* end of the context is now fully established.
Upon completion of the context establishment, the available context * options may be queried through the get methods.
* * @param inputBuf Token generated by the peer. This parameter is ignored * on the first call. * @param offset The offset within the inputBuf where the token * begins. * @param len The length of the token within the inputBuf * (starting at the offset). * @return The output token, if any. * @throws GSSException If this operation fails. */ byte[] initSecContext(byte[] inputBuf, int offset, int len) throws GSSException; /** *Called by the context initiator to start the context creation
* process. This is equivalent to the byte array based method. This
* method may write an output token to the outStream, which the
* application will need to send to the peer for processing by the
* accept call. Typically, the application would do so by calling the
* {@link OutputStream#flush()} method on an OutputStream that encapsulates
* the connection between the two peers. The application can call {@link
* #isEstablished()} to determine if the context establishment phase is
* complete for this peer. A return value of false from
* isEstablished indicates that more tokens are expected to be supplied
* to the initSecContext() method. Note that it is possible that the
* initSecContext() method return a token for the peer, and {@link
* #isEstablished() return true also. This indicates that
* the token needs to be sent to the peer, but the local end of the context
* is now fully established.
The GSS-API authentication tokens contain a definitive start and end. * This method will attempt to read one of these tokens per invocation, * and may block on the stream if only part of the token is available.
* *Upon completion of the context establishment, the available context * options may be queried through the get methods.
* * @param inStream Contains the token generated by the peer. This * parameter is ignored on the first call. * @param outStream Output stream where the output token will be written. * During the final stage of context establishment, there * may be no bytes written. * @return The number of bytes written to outStream, or 0 if no * token is written. * @throws GSSException If this operation fails. */ int initSecContext(InputStream inStream, OutputStream outStream) throws GSSException; /** *Called by the context acceptor upon receiving a token from the peer. * This call is equivalent to the stream based method except that the * token buffers are handled as byte arrays instead of using stream * objects.
* *This method may return an output token which the application will * need to send to the peer for further processing by the init call.
* *null return value indicates that no token needs to be
* sent to the peer. The application can call {@link #isEstablished()}
* to determine if the context establishment phase is complete for this
* peer. A return value of false from {@link #isEstablished()}
* indicates that more tokens are expected to be supplied to this
* method.
Note that it is possible that acceptSecContext() return a token for
* the peer, and isEstablished() return true also. This
* indicates that the token needs to be sent to the peer, but the local
* end of the context is now fully established.
Upon completion of the context establishment, the available context * options may be queried through the get methods.
* * @param inTok Token generated by the peer. * @param offset The offset within the inTok where the token begins. * @param len The length of the token within the inTok (starting * at the offset). * @return The output token, if any. * @throws GSSException If this operation fails. */ byte[] acceptSecContext(byte[] inTok, int offset, int len) throws GSSException; /** *Called by the context acceptor upon receiving a token from the peer.
* This call is equivalent to the byte array method. It may write an
* output token to the outStream, which the application will need to
* send to the peer for processing by its initSecContext method.
* Typically, the application would do so by calling the {@link
* OutputStream#flush()} method on an OutputStream that encapsulates the
* connection between the two peers. The application can call {@link
* #isEstablished()} to determine if the context establishment phase is
* complete for this peer. A return value of false from
* {@link #isEstablished()} indicates that more tokens are expected to be
* supplied to this method.
Note that it is possible that acceptSecContext() return a token for
* the peer, and isEstablished() return true also. This
* indicates that the token needs to be sent to the peer, but the local
* end of the context is now fully established.
The GSS-API authentication tokens contain a definitive start and end. * This method will attempt to read one of these tokens per invocation, * and may block on the stream if only part of the token is available.
* *Upon completion of the context establishment, the available context * options may be queried through the get methods.
* * @param inStream Contains the token generated by the peer. * @param outStream Output stream where the output token will be written. * During the final stage of context establishment, there * may be no bytes written. * @return The number of bytes written, or 0 if no token is written. * @throws GSSException If this operation fails. */ void acceptSecContext(InputStream inStream, OutputStream outStream) throws GSSException; /** * Used during context establishment to determine the state of the * context. Returnstrue if this is a fully established
* context on the caller's side and no more tokens are needed from the
* peer. Should be called after a call to {@link
* #initSecContext(byte[],int,int)} or {@link
* #acceptSecContext(byte[],int,int)} when no {@link GSSException}
* is thrown.
*
* @return True of this context is fully established on this side.
*/
boolean isEstablished();
/**
* Releases any system resources and cryptographic information stored in
* the context object. This will invalidate the context.
*
* @throws GSSException If this operation fails.
*/
void dispose() throws GSSException;
/**
* Returns the maximum message size that, if presented to the * {@link #wrap(byte[],int,int,org.ietf.jgss.MessageProp)} method with * the same confReq and qop parameters, will result in an * output token containing no more than the maxTokenSize bytes.
* *This call is intended for use by applications that communicate over * protocols that impose a maximum message size. It enables the * application to fragment messages prior to applying protection.
* *GSS-API implementations are recommended but not required to detect * invalid QOP values when getWrapSizeLimit is called. This routine * guarantees only a maximum message size, not the availability of * specific QOP values for message protection.
* *Successful completion of this call does not guarantee that wrap will * be able to protect a message of the computed length, since this * ability may depend on the availability of system resources at the * time that wrap is called. However, if the implementation itself * imposes an upper limit on the length of messages that may be * processed by wrap, the implementation should not return a value that * is greater than this length.
* * @param qop Indicates the level of protection wrap will be asked * to provide. * @param confReq Indicates if wrap will be asked to provide privacy * service. * @param maxTokenSize The desired maximum size of the token emitted * by {@link #wrap(byte[],int,int,org.ietf.jgss.MessageProp)}. * @return The maximum wrapped output size. * @throws GSSException If this operation fails. */ int getWrapSizeLimit(int qop, boolean confReq, int maxTokenSize) throws GSSException; /** *Applies per-message security services over the established security * context. The method will return a token with a cryptographic MIC and * may optionally encrypt the specified inBuf. This method is * equivalent in functionality to its stream counterpart. The returned * byte array will contain both the MIC and the message.
* *The {@link MessageProp} object is instantiated by the application * and used to specify a QOP value which selects cryptographic algorithms, * and a privacy service to optionally encrypt the message. The underlying * mechanism that is used in the call may not be able to provide the * privacy service. It sets the actual privacy service that it does * provide in this {@link MessageProp} object which the caller should then * query upon return. If the mechanism is not able to provide the * requested QOP, it throws a {@link GSSException} with the {@link * GSSException#BAD_QOP} code.
* *Since some application-level protocols may wish to use tokens emitted * by wrap to provide "secure framing", implementations should support * the wrapping of zero-length messages.
* *The application will be responsible for sending the token to the * peer.
* * @param inBuf Application data to be protected. * @param offset The offset within the inBuf where the data begins. * @param len The length of the data within the inBuf (starting at * the offset). * @param msgProp Instance of {@link MessageProp} that is used by the * application to set the desired QOP and privacy state. * Set the desired QOP to 0 to request the default QOP. * Upon return from this method, this object will contain * the the actual privacy state that was applied to the * message by the underlying mechanism. * @return The wrapped data. * @throws GSSException If this operation fails. */ byte[] wrap(byte[] inBuf, int offset, int len, MessageProp msgProp) throws GSSException; /** *Allows to apply per-message security services over the established * security context. The method will produce a token with a * cryptographic MIC and may optionally encrypt the message in inStream. * The outStream will contain both the MIC and the message.
* *The {@link MessageProp} object is instantiated by the application and * used to specify a QOP value which selects cryptographic algorithms, and * a privacy service to optionally encrypt the message. The underlying * mechanism that is used in the call may not be able to provide the * privacy service. It sets the actual privacy service that it does * provide in this MessageProp object which the caller should then query * upon return. If the mechanism is not able to provide the requested * QOP, it throws a {@link GSSException} with the {@link * GSSException#BAD_QOP} code.
* *Since some application-level protocols may wish to use tokens emitted * by wrap to provide "secure framing", implementations should support * the wrapping of zero-length messages.
* *The application will be responsible for sending the token to the * peer.
* * @param inStream Input stream containing the application data to be * protected. * @param outStream The output stream to write the protected message to. * The application is responsible for sending this to the * other peer for processing in its unwrap method. * @param msgProp Instance of {@link MessageProp} that is used by the * application to set the desired QOP and privacy state. * Set the desired QOP to 0 to request the default QOP. * Upon return from this method, this object will contain * the the actual privacy state that was applied to the * message by the underlying mechanism. * @throws GSSException If this operation fails. */ void wrap(InputStream inStream, OutputStream outStream, MessageProp msgProp) throws GSSException; /** *Used by the peer application to process tokens generated with the * wrap call. This call is equal in functionality to its stream * counterpart. The method will return the message supplied in the peer * application to the wrap call, verifying the embedded MIC.
* *The {@link MessageProp} object is instantiated by the application and * is used by the underlying mechanism to return information to the caller * such as the QOP, whether confidentiality was applied to the message, and * other supplementary message state information.
* *Since some application-level protocols may wish to use tokens emitted * by wrap to provide "secure framing", implementations should support * the wrapping and unwrapping of zero-length messages.
* * @param inBuf GSS-API wrap token received from peer. * @param offset The offset within the inBuf where the token begins. * @param len The length of the token within the inBuf (starting at * the offset). * @param msgProp Upon return from the method, this object will contain * the applied QOP, the privacy state of the message, and * supplementary information stating whether the token was * a duplicate, old, out of sequence or arriving after a gap. * @return The unwrapped token. * @throws GSSException If this operation fails. */ byte[] unwrap(byte[] inBuf, int offset, int len, MessageProp msgProp) throws GSSException; /** *Used by the peer application to process tokens generated with the * wrap call. This call is equal in functionality to its byte array * counterpart. It will produce the message supplied in the peer * application to the wrap call, verifying the embedded MIC.
* *The {@link MessageProp} object is instantiated by the application * and is used by the underlying mechanism to return information to the * caller such as the QOP, whether confidentiality was applied to the * message, and other supplementary message state information.
* *Since some application-level protocols may wish to use tokens emitted * by wrap to provide "secure framing", implementations should support * the wrapping and unwrapping of zero-length messages.
* * @param inStream Input stream containing the GSS-API wrap token * received from the peer. * @param outStream The output stream to write the application message to. * @param msgProp Upon return from the method, this object will contain * the applied QOP, the privacy state of the message, and * supplementary information stating whether the token was * a duplicate, old, out of sequence or arriving after a gap. * @throws GSSException If this operation fails. */ void unwrap(InputStream inStream, OutputStream outStream, MessageProp msgProp) throws GSSException; /** *Returns a token containing a cryptographic MIC for the supplied * message, for transfer to the peer application. Unlike wrap, which * encapsulates the user message in the returned token, only the message * MIC is returned in the output token. This method is identical in * functionality to its stream counterpart.
* *Note that privacy can only be applied through the wrap call.
* *Since some application-level protocols may wish to use tokens emitted * by getMIC to provide "secure framing", implementations should support * derivation of MICs from zero-length messages.
* * @param inMsg Message to generate MIC over. * @param offset The offset within the inMsg where the token begins. * @param len The length of the token within the inMsg (starting at * the offset). * @param msgProp Instance of MessageProp that is used by the * application to set the desired QOP. Set the desired * QOP to 0 in msgProp to request the default QOP. * Alternatively pass innull for msgProp to
* request default QOP.
* @return The MIC.
* @throws GSSException If this operation fails.
*/
byte[] getMIC(byte[] inMsg, int offset, int len, MessageProp msgProp)
throws GSSException;
/**
* Produces a token containing a cryptographic MIC for the supplied * message, for transfer to the peer application. Unlike wrap, which * encapsulates the user message in the returned token, only the message * MIC is produced in the output token. This method is identical in * functionality to its byte array counterpart.
* *Note that privacy can only be applied through the wrap call.
* *Since some application-level protocols may wish to use tokens emitted * by getMIC to provide "secure framing", implementations should support * derivation of MICs from zero-length messages.
* * @param inStream Input stream containing the message to generate * the MIC over. * @param outStream Output stream to write the GSS-API output token to. * @param msgProp Instance of MessageProp that is used by the * application to set the desired QOP. Set the desired * QOP to 0 in msgProp to request the default QOP. * Alternatively pass innull for msgProp
* to request default QOP.
* @throws GSSException If this operation fails.
*/
void getMIC(InputStream inStream, OutputStream outStream, MessageProp mgProp)
throws GSSException;
/**
* Verifies the cryptographic MIC, contained in the token parameter, * over the supplied message. This method is equivalent in * functionality to its stream counterpart.
* *The MessageProp object is instantiated by the application and is used * by the underlying mechanism to return information to the caller such * as the QOP indicating the strength of protection that was applied to * the message and other supplementary message state information.
* *Since some application-level protocols may wish to use tokens emitted * by getMIC to provide "secure framing", implementations should support * the calculation and verification of MICs over zero-length messages.
* * @param inTok Token generated by peer's getMIC method. * @param tokOffset The offset within the inTok where the token begins. * @param tokLen The length of the token within the inTok (starting at * the offset). * @param inMsg Application message to verify the cryptographic MIC * over. * @param msgOffset The offset within the inMsg where the message begins. * @param msgLen The length of the message within the inMsg (starting * at the offset). * @param msgProp Upon return from the method, this object will contain * the applied QOP and supplementary information * stating whether the token was a duplicate, old, out * of sequence or arriving after a gap. The * confidentiality state will be set tofalse.
* @throws GSSException If this operation fails.
*/
void verifyMIC(byte[] inTok, int tokOffset, int tokLen, byte[] inMsg,
int msgOffset, int msgLen, MessageProp msgProp)
throws GSSException;
/**
* Verifies the cryptographic MIC, contained in the token parameter, * over the supplied message. This method is equivalent in * functionality to its byte array counterpart.
* *The MessageProp object is instantiated by the application and is used * by the underlying mechanism to return information to the caller such * as the QOP indicating the strength of protection that was applied to * the message and other supplementary message state information.
* *Since some application-level protocols may wish to use tokens emitted * by getMIC to provide "secure framing", implementations should support * the calculation and verification of MICs over zero-length messages.
* * @param tokStream Input stream containing the token generated by peer's * getMIC method. * @param msgStream Input stream containing the application message to * verify the cryptographic MIC over. * @param msgProp Upon return from the method, this object will contain * the applied QOP and supplementary information * stating whether the token was a duplicate, old, out of * sequence or arriving after a gap. The confidentiality * state will be set tofalse.
* @throws GSSException If this operation fails.
*/
void verifyMIC(InputStream tokStream, InputStream msgStream, MessageProp msgProp)
throws GSSException;
/**
* Provided to support the sharing of work between multiple processes. * This routine will typically be used by the context-acceptor, in an * application where a single process receives incoming connection * requests and accepts security contexts over them, then passes the * established context to one or more other processes for message * exchange.
* *This method deactivates the security context and creates an * interprocess token which, when passed to the byte array constructor * of the GSSContext interface in another process, will re-activate the * context in the second process. Only a single instantiation of a * given context may be active at any one time; a subsequent attempt by * a context exporter to access the exported security context will fail.
* *The implementation may constrain the set of processes by which the * interprocess token may be imported, either as a function of local * security policy, or as a result of implementation decisions. For * example, some implementations may constrain contexts to be passed * only between processes that run under the same account, or which are * part of the same process group.
* *The interprocess token may contain security-sensitive information * (for example cryptographic keys). While mechanisms are encouraged to * either avoid placing such sensitive information within interprocess * tokens, or to encrypt the token before returning it to the * application, in a typical GSS-API implementation this may not be * possible. Thus the application must take care to protect the * interprocess token, and ensure that any process to which the token is * transferred is trustworthy.
* * @return The exported context. * @throws GSSException If this operation fails. */ byte[] export() throws GSSException; /** *Sets the request state of the mutual authentication flag for the * context. This method is only valid before the context creation * process begins and only for the initiator.
* * @param state Boolean representing if mutual authentication should * be requested during context establishment. * @throws GSSException If this operation fails. */ void requestMutualAuth(boolean state) throws GSSException; /** *Sets the request state of the replay detection service for the * context. This method is only valid before the context creation * process begins and only for the initiator.
* * @param state Boolean representing if replay detection is desired * over the established context. * @throws GSSException If this operation fails. */ void requestReplayDet(boolean state) throws GSSException; /** *Sets the request state for the sequence checking service of the * context. This method is only valid before the context creation * process begins and only for the initiator.
* * @param state Boolean representing if sequence detection is desired * over the established context. * @throws GSSException If this operation fails. */ void requestSequenceDet(boolean state) throws GSSException; /** *Sets the request state for the credential delegation flag for the * context. This method is only valid before the context creation * process begins and only for the initiator.
* * @param state Boolean representing if credential delegation is * desired. * @throws GSSException If this operation fails. */ void requestCredDeleg(boolean state) throws GSSException; /** *Requests anonymous support over the context. This method is only * valid before the context creation process begins and only for the * initiator.
* * @param state Boolean representing if anonymity support is requested. * @throws GSSException If this operation fails. */ void requestAnonymity(boolean state) throws GSSException; /** *Requests that confidentiality service be available over the context. * This method is only valid before the context creation process begins * and only for the initiator.
* * @param state Boolean indicating if confidentiality services are to * be requested for the context. * @throws GSSException If this operation fails. */ void requestConf(boolean state) throws GSSException; /** *Requests that integrity services be available over the context. This * method is only valid before the context creation process begins and * only for the initiator.
* * @param state Boolean indicating if integrity services are to be * requested for the context. * @throws GSSException If this operation fails. */ void requestInteg(boolean state) throws GSSException; /** *Sets the desired lifetime for the context in seconds. This method is * only valid before the context creation process begins and only for * the initiator. Use {@link #INDEFINITE_LIFETIME} and {@link * #DEFAULT_LIFETIME} to request indefinite or default context lifetime.
* * @param lifetime The desired context lifetime in seconds. * @throws GSSException If this operation fails. */ void requestLifetime(int lifetime) throws GSSException; /** *Sets the channel bindings to be used during context establishment. * This method is only valid before the context creation process begins.
* * @param cb Channel bindings to be used. * @throws GSSException If this operation fails. */ void setChannelBinding(ChannelBinding cb) throws GSSException; /** *Returns the state of the delegated credentials for the context. * When issued before context establishment is completed or when the * isProtReady method returns "false", it returns the desired state, * otherwise it will indicate the actual state over the established * context.
* * @return The state of the delegated credentials for the context. */ boolean getCredDelegState(); /** *Returns the state of the mutual authentication option for the * context. When issued before context establishment completes or when * the isProtReady method returns "false", it returns the desired state, * otherwise it will indicate the actual state over the established * context.
* * @return The state of the mutual authentication option. */ boolean getMutualAuthState(); /** *Returns the state of the replay detection option for the context. * When issued before context establishment completes or when the * isProtReady method returns "false", it returns the desired state, * otherwise it will indicate the actual state over the established * context.
* * @return The state of the replay detection option. */ boolean getReplayDetState(); /** *Returns the state of the sequence detection option for the context. * When issued before context establishment completes or when the * isProtReady method returns "false", it returns the desired state, * otherwise it will indicate the actual state over the established * context.
* * @return The state of the sequence detection option. */ boolean getSequenceDetState(); /** *Returns "true" if this is an anonymous context. When issued before * context establishment completes or when the isProtReady method * returns "false", it returns the desired state, otherwise it will * indicate the actual state over the established context.
* * @return True if this is an anonymous context. */ boolean getAnonymityState(); /** *Returns "true" if the context is transferable to other processes * through the use of the {@link #export()} method. This call is only * valid on fully established contexts.
* * @return True if the context is transferable. * @throws GSSException If this operation fails. */ boolean isTransferable() throws GSSException; /** *Returns "true" if the per message operations can be applied over * the context. Some mechanisms may allow the usage of per-message * operations before the context is fully established. This will also * indicate that the get methods will return actual context state * characteristics instead of the desired ones.
* * @return True if the per message operations can be applied over * the context. */ boolean isProtReady(); /** *Returns the confidentiality service state over the context. When * issued before context establishment completes or when the isProtReady * method returns "false", it returns the desired state, otherwise it * will indicate the actual state over the established context.
* * @return True the confidentiality service state. */ boolean getConfState(); /** *Returns the integrity service state over the context. When issued * before context establishment completes or when the isProtReady method * returns "false", it returns the desired state, otherwise it will * indicate the actual state over the established context.
* * @return The integrity service state. */ boolean getIntegState(); /** *Returns the context lifetime in seconds. When issued before context * establishment completes or when the isProtReady method returns * "false", it returns the desired lifetime, otherwise it will indicate * the remaining lifetime for the context.
* * @return The lifetime. */ int getLifetime(); /** *Returns the name of the context initiator. This call is valid only * after the context is fully established or the isProtReady method * returns "true". It is guaranteed to return an MN.
* * @return The name of the context initiator. * @throws GSSException If this operation fails. */ GSSName getSrcName() throws GSSException; /** *Returns the name of the context target (acceptor). This call is * valid only after the context is fully established or the isProtReady * method returns "true". It is guaranteed to return an MN.
* * @return The name of the context target. * @throws GSSException If this operation fails. */ GSSName getTargName() throws GSSException; /** *Returns the mechanism oid for this context. This method may be called * before the context is fully established, but the mechanism returned * may change on successive calls in negotiated mechanism case.
* * @return The mechanism OID. * @throws GSSException If this operation fails. */ Oid getMech() throws GSSException; /** *Returns the delegated credential object on the acceptor's side. * To check for availability of delegated credentials call * {@link #getDelegCredState()}. This call is only valid on fully * established contexts.
* * @return The delegated credential object. * @throws GSSException If this operation fails. */ GSSCredential getDelegCred() throws GSSException; /** *Returns "true" if this is the initiator of the context. This call is * only valid after the context creation process has started.
* * @return True if this is the initiator. * @throws GSSException If this operation fails. */ boolean isInitiator() throws GSSException; }