\input texinfo @c -*-texinfo-*- @c %**start of header @setfilename libgomp.info @settitle GNU libgomp @c %**end of header @copying Copyright @copyright{} 2006-2017 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with the Invariant Sections being ``Funding Free Software'', the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the section entitled ``GNU Free Documentation License''. (a) The FSF's Front-Cover Text is: A GNU Manual (b) The FSF's Back-Cover Text is: You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development. @end copying @ifinfo @dircategory GNU Libraries @direntry * libgomp: (libgomp). GNU Offloading and Multi Processing Runtime Library. @end direntry This manual documents libgomp, the GNU Offloading and Multi Processing Runtime library. This is the GNU implementation of the OpenMP and OpenACC APIs for parallel and accelerator programming in C/C++ and Fortran. Published by the Free Software Foundation 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA @insertcopying @end ifinfo @setchapternewpage odd @titlepage @title GNU Offloading and Multi Processing Runtime Library @subtitle The GNU OpenMP and OpenACC Implementation @page @vskip 0pt plus 1filll @comment For the @value{version-GCC} Version* @sp 1 Published by the Free Software Foundation @* 51 Franklin Street, Fifth Floor@* Boston, MA 02110-1301, USA@* @sp 1 @insertcopying @end titlepage @summarycontents @contents @page @node Top @top Introduction @cindex Introduction This manual documents the usage of libgomp, the GNU Offloading and Multi Processing Runtime Library. This includes the GNU implementation of the @uref{http://www.openmp.org, OpenMP} Application Programming Interface (API) for multi-platform shared-memory parallel programming in C/C++ and Fortran, and the GNU implementation of the @uref{http://www.openacc.org/, OpenACC} Application Programming Interface (API) for offloading of code to accelerator devices in C/C++ and Fortran. Originally, libgomp implemented the GNU OpenMP Runtime Library. Based on this, support for OpenACC and offloading (both OpenACC and OpenMP 4's target construct) has been added later on, and the library's name changed to GNU Offloading and Multi Processing Runtime Library. @comment @comment When you add a new menu item, please keep the right hand @comment aligned to the same column. Do not use tabs. This provides @comment better formatting. @comment @menu * Enabling OpenMP:: How to enable OpenMP for your applications. * Runtime Library Routines:: The OpenMP runtime application programming interface. * Environment Variables:: Influencing runtime behavior with environment variables. * Enabling OpenACC:: How to enable OpenACC for your applications. * OpenACC Runtime Library Routines:: The OpenACC runtime application programming interface. * OpenACC Environment Variables:: Influencing OpenACC runtime behavior with environment variables. * CUDA Streams Usage:: Notes on the implementation of asynchronous operations. * OpenACC Library Interoperability:: OpenACC library interoperability with the NVIDIA CUBLAS library. * The libgomp ABI:: Notes on the external ABI presented by libgomp. * Reporting Bugs:: How to report bugs in the GNU Offloading and Multi Processing Runtime Library. * Copying:: GNU general public license says how you can copy and share libgomp. * GNU Free Documentation License:: How you can copy and share this manual. * Funding:: How to help assure continued work for free software. * Library Index:: Index of this documentation. @end menu @c --------------------------------------------------------------------- @c Enabling OpenMP @c --------------------------------------------------------------------- @node Enabling OpenMP @chapter Enabling OpenMP To activate the OpenMP extensions for C/C++ and Fortran, the compile-time flag @command{-fopenmp} must be specified. This enables the OpenMP directive @code{#pragma omp} in C/C++ and @code{!$omp} directives in free form, @code{c$omp}, @code{*$omp} and @code{!$omp} directives in fixed form, @code{!$} conditional compilation sentinels in free form and @code{c$}, @code{*$} and @code{!$} sentinels in fixed form, for Fortran. The flag also arranges for automatic linking of the OpenMP runtime library (@ref{Runtime Library Routines}). A complete description of all OpenMP directives accepted may be found in the @uref{http://www.openmp.org, OpenMP Application Program Interface} manual, version 4.5. @c --------------------------------------------------------------------- @c Runtime Library Routines @c --------------------------------------------------------------------- @node Runtime Library Routines @chapter Runtime Library Routines The runtime routines described here are defined by Section 3 of the OpenMP specification in version 4.5. The routines are structured in following three parts: @menu Control threads, processors and the parallel environment. They have C linkage, and do not throw exceptions. * omp_get_active_level:: Number of active parallel regions * omp_get_ancestor_thread_num:: Ancestor thread ID * omp_get_cancellation:: Whether cancellation support is enabled * omp_get_default_device:: Get the default device for target regions * omp_get_dynamic:: Dynamic teams setting * omp_get_level:: Number of parallel regions * omp_get_max_active_levels:: Maximum number of active regions * omp_get_max_task_priority:: Maximum task priority value that can be set * omp_get_max_threads:: Maximum number of threads of parallel region * omp_get_nested:: Nested parallel regions * omp_get_num_devices:: Number of target devices * omp_get_num_procs:: Number of processors online * omp_get_num_teams:: Number of teams * omp_get_num_threads:: Size of the active team * omp_get_proc_bind:: Whether theads may be moved between CPUs * omp_get_schedule:: Obtain the runtime scheduling method * omp_get_team_num:: Get team number * omp_get_team_size:: Number of threads in a team * omp_get_thread_limit:: Maximum number of threads * omp_get_thread_num:: Current thread ID * omp_in_parallel:: Whether a parallel region is active * omp_in_final:: Whether in final or included task region * omp_is_initial_device:: Whether executing on the host device * omp_set_default_device:: Set the default device for target regions * omp_set_dynamic:: Enable/disable dynamic teams * omp_set_max_active_levels:: Limits the number of active parallel regions * omp_set_nested:: Enable/disable nested parallel regions * omp_set_num_threads:: Set upper team size limit * omp_set_schedule:: Set the runtime scheduling method Initialize, set, test, unset and destroy simple and nested locks. * omp_init_lock:: Initialize simple lock * omp_set_lock:: Wait for and set simple lock * omp_test_lock:: Test and set simple lock if available * omp_unset_lock:: Unset simple lock * omp_destroy_lock:: Destroy simple lock * omp_init_nest_lock:: Initialize nested lock * omp_set_nest_lock:: Wait for and set simple lock * omp_test_nest_lock:: Test and set nested lock if available * omp_unset_nest_lock:: Unset nested lock * omp_destroy_nest_lock:: Destroy nested lock Portable, thread-based, wall clock timer. * omp_get_wtick:: Get timer precision. * omp_get_wtime:: Elapsed wall clock time. @end menu @node omp_get_active_level @section @code{omp_get_active_level} -- Number of parallel regions @table @asis @item @emph{Description}: This function returns the nesting level for the active parallel blocks, which enclose the calling call. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_active_level(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_active_level()} @end multitable @item @emph{See also}: @ref{omp_get_level}, @ref{omp_get_max_active_levels}, @ref{omp_set_max_active_levels} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.20. @end table @node omp_get_ancestor_thread_num @section @code{omp_get_ancestor_thread_num} -- Ancestor thread ID @table @asis @item @emph{Description}: This function returns the thread identification number for the given nesting level of the current thread. For values of @var{level} outside zero to @code{omp_get_level} -1 is returned; if @var{level} is @code{omp_get_level} the result is identical to @code{omp_get_thread_num}. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_ancestor_thread_num(int level);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_ancestor_thread_num(level)} @item @tab @code{integer level} @end multitable @item @emph{See also}: @ref{omp_get_level}, @ref{omp_get_thread_num}, @ref{omp_get_team_size} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.18. @end table @node omp_get_cancellation @section @code{omp_get_cancellation} -- Whether cancellation support is enabled @table @asis @item @emph{Description}: This function returns @code{true} if cancellation is activated, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. Unless @env{OMP_CANCELLATION} is set true, cancellations are deactivated. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_cancellation(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_get_cancellation()} @end multitable @item @emph{See also}: @ref{OMP_CANCELLATION} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.9. @end table @node omp_get_default_device @section @code{omp_get_default_device} -- Get the default device for target regions @table @asis @item @emph{Description}: Get the default device for target regions without device clause. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_default_device(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_default_device()} @end multitable @item @emph{See also}: @ref{OMP_DEFAULT_DEVICE}, @ref{omp_set_default_device} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.30. @end table @node omp_get_dynamic @section @code{omp_get_dynamic} -- Dynamic teams setting @table @asis @item @emph{Description}: This function returns @code{true} if enabled, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. The dynamic team setting may be initialized at startup by the @env{OMP_DYNAMIC} environment variable or at runtime using @code{omp_set_dynamic}. If undefined, dynamic adjustment is disabled by default. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_dynamic(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_get_dynamic()} @end multitable @item @emph{See also}: @ref{omp_set_dynamic}, @ref{OMP_DYNAMIC} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.8. @end table @node omp_get_level @section @code{omp_get_level} -- Obtain the current nesting level @table @asis @item @emph{Description}: This function returns the nesting level for the parallel blocks, which enclose the calling call. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_level(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_level()} @end multitable @item @emph{See also}: @ref{omp_get_active_level} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.17. @end table @node omp_get_max_active_levels @section @code{omp_get_max_active_levels} -- Maximum number of active regions @table @asis @item @emph{Description}: This function obtains the maximum allowed number of nested, active parallel regions. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_max_active_levels(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_max_active_levels()} @end multitable @item @emph{See also}: @ref{omp_set_max_active_levels}, @ref{omp_get_active_level} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.16. @end table @node omp_get_max_task_priority @section @code{omp_get_max_task_priority} -- Maximum priority value that can be set for tasks. @table @asis @item @emph{Description}: This function obtains the maximum allowed priority number for tasks. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_max_task_priority(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_max_task_priority()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.29. @end table @node omp_get_max_threads @section @code{omp_get_max_threads} -- Maximum number of threads of parallel region @table @asis @item @emph{Description}: Return the maximum number of threads used for the current parallel region that does not use the clause @code{num_threads}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_max_threads(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_max_threads()} @end multitable @item @emph{See also}: @ref{omp_set_num_threads}, @ref{omp_set_dynamic}, @ref{omp_get_thread_limit} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.3. @end table @node omp_get_nested @section @code{omp_get_nested} -- Nested parallel regions @table @asis @item @emph{Description}: This function returns @code{true} if nested parallel regions are enabled, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. Nested parallel regions may be initialized at startup by the @env{OMP_NESTED} environment variable or at runtime using @code{omp_set_nested}. If undefined, nested parallel regions are disabled by default. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_nested(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_get_nested()} @end multitable @item @emph{See also}: @ref{omp_set_nested}, @ref{OMP_NESTED} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.11. @end table @node omp_get_num_devices @section @code{omp_get_num_devices} -- Number of target devices @table @asis @item @emph{Description}: Returns the number of target devices. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_num_devices(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_num_devices()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.31. @end table @node omp_get_num_procs @section @code{omp_get_num_procs} -- Number of processors online @table @asis @item @emph{Description}: Returns the number of processors online on that device. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_num_procs(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_num_procs()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.5. @end table @node omp_get_num_teams @section @code{omp_get_num_teams} -- Number of teams @table @asis @item @emph{Description}: Returns the number of teams in the current team region. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_num_teams(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_num_teams()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.32. @end table @node omp_get_num_threads @section @code{omp_get_num_threads} -- Size of the active team @table @asis @item @emph{Description}: Returns the number of threads in the current team. In a sequential section of the program @code{omp_get_num_threads} returns 1. The default team size may be initialized at startup by the @env{OMP_NUM_THREADS} environment variable. At runtime, the size of the current team may be set either by the @code{NUM_THREADS} clause or by @code{omp_set_num_threads}. If none of the above were used to define a specific value and @env{OMP_DYNAMIC} is disabled, one thread per CPU online is used. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_num_threads(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_num_threads()} @end multitable @item @emph{See also}: @ref{omp_get_max_threads}, @ref{omp_set_num_threads}, @ref{OMP_NUM_THREADS} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.2. @end table @node omp_get_proc_bind @section @code{omp_get_proc_bind} -- Whether theads may be moved between CPUs @table @asis @item @emph{Description}: This functions returns the currently active thread affinity policy, which is set via @env{OMP_PROC_BIND}. Possible values are @code{omp_proc_bind_false}, @code{omp_proc_bind_true}, @code{omp_proc_bind_master}, @code{omp_proc_bind_close} and @code{omp_proc_bind_spread}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{omp_proc_bind_t omp_get_proc_bind(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer(kind=omp_proc_bind_kind) function omp_get_proc_bind()} @end multitable @item @emph{See also}: @ref{OMP_PROC_BIND}, @ref{OMP_PLACES}, @ref{GOMP_CPU_AFFINITY}, @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.22. @end table @node omp_get_schedule @section @code{omp_get_schedule} -- Obtain the runtime scheduling method @table @asis @item @emph{Description}: Obtain the runtime scheduling method. The @var{kind} argument will be set to the value @code{omp_sched_static}, @code{omp_sched_dynamic}, @code{omp_sched_guided} or @code{omp_sched_auto}. The second argument, @var{chunk_size}, is set to the chunk size. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_get_schedule(omp_sched_t *kind, int *chunk_size);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_get_schedule(kind, chunk_size)} @item @tab @code{integer(kind=omp_sched_kind) kind} @item @tab @code{integer chunk_size} @end multitable @item @emph{See also}: @ref{omp_set_schedule}, @ref{OMP_SCHEDULE} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.13. @end table @node omp_get_team_num @section @code{omp_get_team_num} -- Get team number @table @asis @item @emph{Description}: Returns the team number of the calling thread. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_team_num(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_team_num()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.33. @end table @node omp_get_team_size @section @code{omp_get_team_size} -- Number of threads in a team @table @asis @item @emph{Description}: This function returns the number of threads in a thread team to which either the current thread or its ancestor belongs. For values of @var{level} outside zero to @code{omp_get_level}, -1 is returned; if @var{level} is zero, 1 is returned, and for @code{omp_get_level}, the result is identical to @code{omp_get_num_threads}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_team_size(int level);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_team_size(level)} @item @tab @code{integer level} @end multitable @item @emph{See also}: @ref{omp_get_num_threads}, @ref{omp_get_level}, @ref{omp_get_ancestor_thread_num} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.19. @end table @node omp_get_thread_limit @section @code{omp_get_thread_limit} -- Maximum number of threads @table @asis @item @emph{Description}: Return the maximum number of threads of the program. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_thread_limit(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_thread_limit()} @end multitable @item @emph{See also}: @ref{omp_get_max_threads}, @ref{OMP_THREAD_LIMIT} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.14. @end table @node omp_get_thread_num @section @code{omp_get_thread_num} -- Current thread ID @table @asis @item @emph{Description}: Returns a unique thread identification number within the current team. In a sequential parts of the program, @code{omp_get_thread_num} always returns 0. In parallel regions the return value varies from 0 to @code{omp_get_num_threads}-1 inclusive. The return value of the master thread of a team is always 0. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_get_thread_num(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function omp_get_thread_num()} @end multitable @item @emph{See also}: @ref{omp_get_num_threads}, @ref{omp_get_ancestor_thread_num} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.4. @end table @node omp_in_parallel @section @code{omp_in_parallel} -- Whether a parallel region is active @table @asis @item @emph{Description}: This function returns @code{true} if currently running in parallel, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_in_parallel(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_in_parallel()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.6. @end table @node omp_in_final @section @code{omp_in_final} -- Whether in final or included task region @table @asis @item @emph{Description}: This function returns @code{true} if currently running in a final or included task region, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_in_final(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_in_final()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.21. @end table @node omp_is_initial_device @section @code{omp_is_initial_device} -- Whether executing on the host device @table @asis @item @emph{Description}: This function returns @code{true} if currently running on the host device, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_is_initial_device(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_is_initial_device()} @end multitable @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.34. @end table @node omp_set_default_device @section @code{omp_set_default_device} -- Set the default device for target regions @table @asis @item @emph{Description}: Set the default device for target regions without device clause. The argument shall be a nonnegative device number. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_default_device(int device_num);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_default_device(device_num)} @item @tab @code{integer device_num} @end multitable @item @emph{See also}: @ref{OMP_DEFAULT_DEVICE}, @ref{omp_get_default_device} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.29. @end table @node omp_set_dynamic @section @code{omp_set_dynamic} -- Enable/disable dynamic teams @table @asis @item @emph{Description}: Enable or disable the dynamic adjustment of the number of threads within a team. The function takes the language-specific equivalent of @code{true} and @code{false}, where @code{true} enables dynamic adjustment of team sizes and @code{false} disables it. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_dynamic(int dynamic_threads);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_dynamic(dynamic_threads)} @item @tab @code{logical, intent(in) :: dynamic_threads} @end multitable @item @emph{See also}: @ref{OMP_DYNAMIC}, @ref{omp_get_dynamic} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.7. @end table @node omp_set_max_active_levels @section @code{omp_set_max_active_levels} -- Limits the number of active parallel regions @table @asis @item @emph{Description}: This function limits the maximum allowed number of nested, active parallel regions. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_max_active_levels(int max_levels);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_max_active_levels(max_levels)} @item @tab @code{integer max_levels} @end multitable @item @emph{See also}: @ref{omp_get_max_active_levels}, @ref{omp_get_active_level} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.15. @end table @node omp_set_nested @section @code{omp_set_nested} -- Enable/disable nested parallel regions @table @asis @item @emph{Description}: Enable or disable nested parallel regions, i.e., whether team members are allowed to create new teams. The function takes the language-specific equivalent of @code{true} and @code{false}, where @code{true} enables dynamic adjustment of team sizes and @code{false} disables it. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_nested(int nested);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_nested(nested)} @item @tab @code{logical, intent(in) :: nested} @end multitable @item @emph{See also}: @ref{OMP_NESTED}, @ref{omp_get_nested} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.10. @end table @node omp_set_num_threads @section @code{omp_set_num_threads} -- Set upper team size limit @table @asis @item @emph{Description}: Specifies the number of threads used by default in subsequent parallel sections, if those do not specify a @code{num_threads} clause. The argument of @code{omp_set_num_threads} shall be a positive integer. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_num_threads(int num_threads);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_num_threads(num_threads)} @item @tab @code{integer, intent(in) :: num_threads} @end multitable @item @emph{See also}: @ref{OMP_NUM_THREADS}, @ref{omp_get_num_threads}, @ref{omp_get_max_threads} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.1. @end table @node omp_set_schedule @section @code{omp_set_schedule} -- Set the runtime scheduling method @table @asis @item @emph{Description}: Sets the runtime scheduling method. The @var{kind} argument can have the value @code{omp_sched_static}, @code{omp_sched_dynamic}, @code{omp_sched_guided} or @code{omp_sched_auto}. Except for @code{omp_sched_auto}, the chunk size is set to the value of @var{chunk_size} if positive, or to the default value if zero or negative. For @code{omp_sched_auto} the @var{chunk_size} argument is ignored. @item @emph{C/C++} @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_schedule(omp_sched_t kind, int chunk_size);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_schedule(kind, chunk_size)} @item @tab @code{integer(kind=omp_sched_kind) kind} @item @tab @code{integer chunk_size} @end multitable @item @emph{See also}: @ref{omp_get_schedule} @ref{OMP_SCHEDULE} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.2.12. @end table @node omp_init_lock @section @code{omp_init_lock} -- Initialize simple lock @table @asis @item @emph{Description}: Initialize a simple lock. After initialization, the lock is in an unlocked state. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_init_lock(omp_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_init_lock(svar)} @item @tab @code{integer(omp_lock_kind), intent(out) :: svar} @end multitable @item @emph{See also}: @ref{omp_destroy_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.1. @end table @node omp_set_lock @section @code{omp_set_lock} -- Wait for and set simple lock @table @asis @item @emph{Description}: Before setting a simple lock, the lock variable must be initialized by @code{omp_init_lock}. The calling thread is blocked until the lock is available. If the lock is already held by the current thread, a deadlock occurs. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_lock(omp_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_lock(svar)} @item @tab @code{integer(omp_lock_kind), intent(inout) :: svar} @end multitable @item @emph{See also}: @ref{omp_init_lock}, @ref{omp_test_lock}, @ref{omp_unset_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.4. @end table @node omp_test_lock @section @code{omp_test_lock} -- Test and set simple lock if available @table @asis @item @emph{Description}: Before setting a simple lock, the lock variable must be initialized by @code{omp_init_lock}. Contrary to @code{omp_set_lock}, @code{omp_test_lock} does not block if the lock is not available. This function returns @code{true} upon success, @code{false} otherwise. Here, @code{true} and @code{false} represent their language-specific counterparts. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_test_lock(omp_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_test_lock(svar)} @item @tab @code{integer(omp_lock_kind), intent(inout) :: svar} @end multitable @item @emph{See also}: @ref{omp_init_lock}, @ref{omp_set_lock}, @ref{omp_set_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.6. @end table @node omp_unset_lock @section @code{omp_unset_lock} -- Unset simple lock @table @asis @item @emph{Description}: A simple lock about to be unset must have been locked by @code{omp_set_lock} or @code{omp_test_lock} before. In addition, the lock must be held by the thread calling @code{omp_unset_lock}. Then, the lock becomes unlocked. If one or more threads attempted to set the lock before, one of them is chosen to, again, set the lock to itself. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_unset_lock(omp_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_unset_lock(svar)} @item @tab @code{integer(omp_lock_kind), intent(inout) :: svar} @end multitable @item @emph{See also}: @ref{omp_set_lock}, @ref{omp_test_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.5. @end table @node omp_destroy_lock @section @code{omp_destroy_lock} -- Destroy simple lock @table @asis @item @emph{Description}: Destroy a simple lock. In order to be destroyed, a simple lock must be in the unlocked state. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_destroy_lock(omp_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_destroy_lock(svar)} @item @tab @code{integer(omp_lock_kind), intent(inout) :: svar} @end multitable @item @emph{See also}: @ref{omp_init_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.3. @end table @node omp_init_nest_lock @section @code{omp_init_nest_lock} -- Initialize nested lock @table @asis @item @emph{Description}: Initialize a nested lock. After initialization, the lock is in an unlocked state and the nesting count is set to zero. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_init_nest_lock(omp_nest_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_init_nest_lock(nvar)} @item @tab @code{integer(omp_nest_lock_kind), intent(out) :: nvar} @end multitable @item @emph{See also}: @ref{omp_destroy_nest_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.1. @end table @node omp_set_nest_lock @section @code{omp_set_nest_lock} -- Wait for and set nested lock @table @asis @item @emph{Description}: Before setting a nested lock, the lock variable must be initialized by @code{omp_init_nest_lock}. The calling thread is blocked until the lock is available. If the lock is already held by the current thread, the nesting count for the lock is incremented. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_set_nest_lock(omp_nest_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_set_nest_lock(nvar)} @item @tab @code{integer(omp_nest_lock_kind), intent(inout) :: nvar} @end multitable @item @emph{See also}: @ref{omp_init_nest_lock}, @ref{omp_unset_nest_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.4. @end table @node omp_test_nest_lock @section @code{omp_test_nest_lock} -- Test and set nested lock if available @table @asis @item @emph{Description}: Before setting a nested lock, the lock variable must be initialized by @code{omp_init_nest_lock}. Contrary to @code{omp_set_nest_lock}, @code{omp_test_nest_lock} does not block if the lock is not available. If the lock is already held by the current thread, the new nesting count is returned. Otherwise, the return value equals zero. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int omp_test_nest_lock(omp_nest_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{logical function omp_test_nest_lock(nvar)} @item @tab @code{integer(omp_nest_lock_kind), intent(inout) :: nvar} @end multitable @item @emph{See also}: @ref{omp_init_lock}, @ref{omp_set_lock}, @ref{omp_set_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.6. @end table @node omp_unset_nest_lock @section @code{omp_unset_nest_lock} -- Unset nested lock @table @asis @item @emph{Description}: A nested lock about to be unset must have been locked by @code{omp_set_nested_lock} or @code{omp_test_nested_lock} before. In addition, the lock must be held by the thread calling @code{omp_unset_nested_lock}. If the nesting count drops to zero, the lock becomes unlocked. If one ore more threads attempted to set the lock before, one of them is chosen to, again, set the lock to itself. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_unset_nest_lock(omp_nest_lock_t *lock);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_unset_nest_lock(nvar)} @item @tab @code{integer(omp_nest_lock_kind), intent(inout) :: nvar} @end multitable @item @emph{See also}: @ref{omp_set_nest_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.5. @end table @node omp_destroy_nest_lock @section @code{omp_destroy_nest_lock} -- Destroy nested lock @table @asis @item @emph{Description}: Destroy a nested lock. In order to be destroyed, a nested lock must be in the unlocked state and its nesting count must equal zero. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void omp_destroy_nest_lock(omp_nest_lock_t *);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine omp_destroy_nest_lock(nvar)} @item @tab @code{integer(omp_nest_lock_kind), intent(inout) :: nvar} @end multitable @item @emph{See also}: @ref{omp_init_lock} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.3.3. @end table @node omp_get_wtick @section @code{omp_get_wtick} -- Get timer precision @table @asis @item @emph{Description}: Gets the timer precision, i.e., the number of seconds between two successive clock ticks. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{double omp_get_wtick(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{double precision function omp_get_wtick()} @end multitable @item @emph{See also}: @ref{omp_get_wtime} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.4.2. @end table @node omp_get_wtime @section @code{omp_get_wtime} -- Elapsed wall clock time @table @asis @item @emph{Description}: Elapsed wall clock time in seconds. The time is measured per thread, no guarantee can be made that two distinct threads measure the same time. Time is measured from some "time in the past", which is an arbitrary time guaranteed not to change during the execution of the program. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{double omp_get_wtime(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{double precision function omp_get_wtime()} @end multitable @item @emph{See also}: @ref{omp_get_wtick} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 3.4.1. @end table @c --------------------------------------------------------------------- @c Environment Variables @c --------------------------------------------------------------------- @node Environment Variables @chapter Environment Variables The environment variables which beginning with @env{OMP_} are defined by section 4 of the OpenMP specification in version 4.5, while those beginning with @env{GOMP_} are GNU extensions. @menu * OMP_CANCELLATION:: Set whether cancellation is activated * OMP_DISPLAY_ENV:: Show OpenMP version and environment variables * OMP_DEFAULT_DEVICE:: Set the device used in target regions * OMP_DYNAMIC:: Dynamic adjustment of threads * OMP_MAX_ACTIVE_LEVELS:: Set the maximum number of nested parallel regions * OMP_MAX_TASK_PRIORITY:: Set the maximum task priority value * OMP_NESTED:: Nested parallel regions * OMP_NUM_THREADS:: Specifies the number of threads to use * OMP_PROC_BIND:: Whether theads may be moved between CPUs * OMP_PLACES:: Specifies on which CPUs the theads should be placed * OMP_STACKSIZE:: Set default thread stack size * OMP_SCHEDULE:: How threads are scheduled * OMP_THREAD_LIMIT:: Set the maximum number of threads * OMP_WAIT_POLICY:: How waiting threads are handled * GOMP_CPU_AFFINITY:: Bind threads to specific CPUs * GOMP_DEBUG:: Enable debugging output * GOMP_STACKSIZE:: Set default thread stack size * GOMP_SPINCOUNT:: Set the busy-wait spin count * GOMP_RTEMS_THREAD_POOLS:: Set the RTEMS specific thread pools @end menu @node OMP_CANCELLATION @section @env{OMP_CANCELLATION} -- Set whether cancellation is activated @cindex Environment Variable @table @asis @item @emph{Description}: If set to @code{TRUE}, the cancellation is activated. If set to @code{FALSE} or if unset, cancellation is disabled and the @code{cancel} construct is ignored. @item @emph{See also}: @ref{omp_get_cancellation} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.11 @end table @node OMP_DISPLAY_ENV @section @env{OMP_DISPLAY_ENV} -- Show OpenMP version and environment variables @cindex Environment Variable @table @asis @item @emph{Description}: If set to @code{TRUE}, the OpenMP version number and the values associated with the OpenMP environment variables are printed to @code{stderr}. If set to @code{VERBOSE}, it additionally shows the value of the environment variables which are GNU extensions. If undefined or set to @code{FALSE}, this information will not be shown. @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.12 @end table @node OMP_DEFAULT_DEVICE @section @env{OMP_DEFAULT_DEVICE} -- Set the device used in target regions @cindex Environment Variable @table @asis @item @emph{Description}: Set to choose the device which is used in a @code{target} region, unless the value is overridden by @code{omp_set_default_device} or by a @code{device} clause. The value shall be the nonnegative device number. If no device with the given device number exists, the code is executed on the host. If unset, device number 0 will be used. @item @emph{See also}: @ref{omp_get_default_device}, @ref{omp_set_default_device}, @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.13 @end table @node OMP_DYNAMIC @section @env{OMP_DYNAMIC} -- Dynamic adjustment of threads @cindex Environment Variable @table @asis @item @emph{Description}: Enable or disable the dynamic adjustment of the number of threads within a team. The value of this environment variable shall be @code{TRUE} or @code{FALSE}. If undefined, dynamic adjustment is disabled by default. @item @emph{See also}: @ref{omp_set_dynamic} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.3 @end table @node OMP_MAX_ACTIVE_LEVELS @section @env{OMP_MAX_ACTIVE_LEVELS} -- Set the maximum number of nested parallel regions @cindex Environment Variable @table @asis @item @emph{Description}: Specifies the initial value for the maximum number of nested parallel regions. The value of this variable shall be a positive integer. If undefined, the number of active levels is unlimited. @item @emph{See also}: @ref{omp_set_max_active_levels} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.9 @end table @node OMP_MAX_TASK_PRIORITY @section @env{OMP_MAX_TASK_PRIORITY} -- Set the maximum priority number that can be set for a task. @cindex Environment Variable @table @asis @item @emph{Description}: Specifies the initial value for the maximum priority value that can be set for a task. The value of this variable shall be a non-negative integer, and zero is allowed. If undefined, the default priority is 0. @item @emph{See also}: @ref{omp_get_max_task_priority} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.14 @end table @node OMP_NESTED @section @env{OMP_NESTED} -- Nested parallel regions @cindex Environment Variable @cindex Implementation specific setting @table @asis @item @emph{Description}: Enable or disable nested parallel regions, i.e., whether team members are allowed to create new teams. The value of this environment variable shall be @code{TRUE} or @code{FALSE}. If undefined, nested parallel regions are disabled by default. @item @emph{See also}: @ref{omp_set_nested} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.6 @end table @node OMP_NUM_THREADS @section @env{OMP_NUM_THREADS} -- Specifies the number of threads to use @cindex Environment Variable @cindex Implementation specific setting @table @asis @item @emph{Description}: Specifies the default number of threads to use in parallel regions. The value of this variable shall be a comma-separated list of positive integers; the value specified the number of threads to use for the corresponding nested level. If undefined one thread per CPU is used. @item @emph{See also}: @ref{omp_set_num_threads} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.2 @end table @node OMP_PROC_BIND @section @env{OMP_PROC_BIND} -- Whether theads may be moved between CPUs @cindex Environment Variable @table @asis @item @emph{Description}: Specifies whether threads may be moved between processors. If set to @code{TRUE}, OpenMP theads should not be moved; if set to @code{FALSE} they may be moved. Alternatively, a comma separated list with the values @code{MASTER}, @code{CLOSE} and @code{SPREAD} can be used to specify the thread affinity policy for the corresponding nesting level. With @code{MASTER} the worker threads are in the same place partition as the master thread. With @code{CLOSE} those are kept close to the master thread in contiguous place partitions. And with @code{SPREAD} a sparse distribution across the place partitions is used. When undefined, @env{OMP_PROC_BIND} defaults to @code{TRUE} when @env{OMP_PLACES} or @env{GOMP_CPU_AFFINITY} is set and @code{FALSE} otherwise. @item @emph{See also}: @ref{OMP_PLACES}, @ref{GOMP_CPU_AFFINITY}, @ref{omp_get_proc_bind} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.4 @end table @node OMP_PLACES @section @env{OMP_PLACES} -- Specifies on which CPUs the theads should be placed @cindex Environment Variable @table @asis @item @emph{Description}: The thread placement can be either specified using an abstract name or by an explicit list of the places. The abstract names @code{threads}, @code{cores} and @code{sockets} can be optionally followed by a positive number in parentheses, which denotes the how many places shall be created. With @code{threads} each place corresponds to a single hardware thread; @code{cores} to a single core with the corresponding number of hardware threads; and with @code{sockets} the place corresponds to a single socket. The resulting placement can be shown by setting the @env{OMP_DISPLAY_ENV} environment variable. Alternatively, the placement can be specified explicitly as comma-separated list of places. A place is specified by set of nonnegative numbers in curly braces, denoting the denoting the hardware threads. The hardware threads belonging to a place can either be specified as comma-separated list of nonnegative thread numbers or using an interval. Multiple places can also be either specified by a comma-separated list of places or by an interval. To specify an interval, a colon followed by the count is placed after after the hardware thread number or the place. Optionally, the length can be followed by a colon and the stride number -- otherwise a unit stride is assumed. For instance, the following specifies the same places list: @code{"@{0,1,2@}, @{3,4,6@}, @{7,8,9@}, @{10,11,12@}"}; @code{"@{0:3@}, @{3:3@}, @{7:3@}, @{10:3@}"}; and @code{"@{0:2@}:4:3"}. If @env{OMP_PLACES} and @env{GOMP_CPU_AFFINITY} are unset and @env{OMP_PROC_BIND} is either unset or @code{false}, threads may be moved between CPUs following no placement policy. @item @emph{See also}: @ref{OMP_PROC_BIND}, @ref{GOMP_CPU_AFFINITY}, @ref{omp_get_proc_bind}, @ref{OMP_DISPLAY_ENV} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.5 @end table @node OMP_STACKSIZE @section @env{OMP_STACKSIZE} -- Set default thread stack size @cindex Environment Variable @table @asis @item @emph{Description}: Set the default thread stack size in kilobytes, unless the number is suffixed by @code{B}, @code{K}, @code{M} or @code{G}, in which case the size is, respectively, in bytes, kilobytes, megabytes or gigabytes. This is different from @code{pthread_attr_setstacksize} which gets the number of bytes as an argument. If the stack size cannot be set due to system constraints, an error is reported and the initial stack size is left unchanged. If undefined, the stack size is system dependent. @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.7 @end table @node OMP_SCHEDULE @section @env{OMP_SCHEDULE} -- How threads are scheduled @cindex Environment Variable @cindex Implementation specific setting @table @asis @item @emph{Description}: Allows to specify @code{schedule type} and @code{chunk size}. The value of the variable shall have the form: @code{type[,chunk]} where @code{type} is one of @code{static}, @code{dynamic}, @code{guided} or @code{auto} The optional @code{chunk} size shall be a positive integer. If undefined, dynamic scheduling and a chunk size of 1 is used. @item @emph{See also}: @ref{omp_set_schedule} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Sections 2.7.1.1 and 4.1 @end table @node OMP_THREAD_LIMIT @section @env{OMP_THREAD_LIMIT} -- Set the maximum number of threads @cindex Environment Variable @table @asis @item @emph{Description}: Specifies the number of threads to use for the whole program. The value of this variable shall be a positive integer. If undefined, the number of threads is not limited. @item @emph{See also}: @ref{OMP_NUM_THREADS}, @ref{omp_get_thread_limit} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.10 @end table @node OMP_WAIT_POLICY @section @env{OMP_WAIT_POLICY} -- How waiting threads are handled @cindex Environment Variable @table @asis @item @emph{Description}: Specifies whether waiting threads should be active or passive. If the value is @code{PASSIVE}, waiting threads should not consume CPU power while waiting; while the value is @code{ACTIVE} specifies that they should. If undefined, threads wait actively for a short time before waiting passively. @item @emph{See also}: @ref{GOMP_SPINCOUNT} @item @emph{Reference}: @uref{http://www.openmp.org/, OpenMP specification v4.5}, Section 4.8 @end table @node GOMP_CPU_AFFINITY @section @env{GOMP_CPU_AFFINITY} -- Bind threads to specific CPUs @cindex Environment Variable @table @asis @item @emph{Description}: Binds threads to specific CPUs. The variable should contain a space-separated or comma-separated list of CPUs. This list may contain different kinds of entries: either single CPU numbers in any order, a range of CPUs (M-N) or a range with some stride (M-N:S). CPU numbers are zero based. For example, @code{GOMP_CPU_AFFINITY="0 3 1-2 4-15:2"} will bind the initial thread to CPU 0, the second to CPU 3, the third to CPU 1, the fourth to CPU 2, the fifth to CPU 4, the sixth through tenth to CPUs 6, 8, 10, 12, and 14 respectively and then start assigning back from the beginning of the list. @code{GOMP_CPU_AFFINITY=0} binds all threads to CPU 0. There is no libgomp library routine to determine whether a CPU affinity specification is in effect. As a workaround, language-specific library functions, e.g., @code{getenv} in C or @code{GET_ENVIRONMENT_VARIABLE} in Fortran, may be used to query the setting of the @code{GOMP_CPU_AFFINITY} environment variable. A defined CPU affinity on startup cannot be changed or disabled during the runtime of the application. If both @env{GOMP_CPU_AFFINITY} and @env{OMP_PROC_BIND} are set, @env{OMP_PROC_BIND} has a higher precedence. If neither has been set and @env{OMP_PROC_BIND} is unset, or when @env{OMP_PROC_BIND} is set to @code{FALSE}, the host system will handle the assignment of threads to CPUs. @item @emph{See also}: @ref{OMP_PLACES}, @ref{OMP_PROC_BIND} @end table @node GOMP_DEBUG @section @env{GOMP_DEBUG} -- Enable debugging output @cindex Environment Variable @table @asis @item @emph{Description}: Enable debugging output. The variable should be set to @code{0} (disabled, also the default if not set), or @code{1} (enabled). If enabled, some debugging output will be printed during execution. This is currently not specified in more detail, and subject to change. @end table @node GOMP_STACKSIZE @section @env{GOMP_STACKSIZE} -- Set default thread stack size @cindex Environment Variable @cindex Implementation specific setting @table @asis @item @emph{Description}: Set the default thread stack size in kilobytes. This is different from @code{pthread_attr_setstacksize} which gets the number of bytes as an argument. If the stack size cannot be set due to system constraints, an error is reported and the initial stack size is left unchanged. If undefined, the stack size is system dependent. @item @emph{See also}: @ref{OMP_STACKSIZE} @item @emph{Reference}: @uref{http://gcc.gnu.org/ml/gcc-patches/2006-06/msg00493.html, GCC Patches Mailinglist}, @uref{http://gcc.gnu.org/ml/gcc-patches/2006-06/msg00496.html, GCC Patches Mailinglist} @end table @node GOMP_SPINCOUNT @section @env{GOMP_SPINCOUNT} -- Set the busy-wait spin count @cindex Environment Variable @cindex Implementation specific setting @table @asis @item @emph{Description}: Determines how long a threads waits actively with consuming CPU power before waiting passively without consuming CPU power. The value may be either @code{INFINITE}, @code{INFINITY} to always wait actively or an integer which gives the number of spins of the busy-wait loop. The integer may optionally be followed by the following suffixes acting as multiplication factors: @code{k} (kilo, thousand), @code{M} (mega, million), @code{G} (giga, billion), or @code{T} (tera, trillion). If undefined, 0 is used when @env{OMP_WAIT_POLICY} is @code{PASSIVE}, 300,000 is used when @env{OMP_WAIT_POLICY} is undefined and 30 billion is used when @env{OMP_WAIT_POLICY} is @code{ACTIVE}. If there are more OpenMP threads than available CPUs, 1000 and 100 spins are used for @env{OMP_WAIT_POLICY} being @code{ACTIVE} or undefined, respectively; unless the @env{GOMP_SPINCOUNT} is lower or @env{OMP_WAIT_POLICY} is @code{PASSIVE}. @item @emph{See also}: @ref{OMP_WAIT_POLICY} @end table @node GOMP_RTEMS_THREAD_POOLS @section @env{GOMP_RTEMS_THREAD_POOLS} -- Set the RTEMS specific thread pools @cindex Environment Variable @cindex Implementation specific setting @table @asis @item @emph{Description}: This environment variable is only used on the RTEMS real-time operating system. It determines the scheduler instance specific thread pools. The format for @env{GOMP_RTEMS_THREAD_POOLS} is a list of optional @code{[$]@@} configurations separated by @code{:} where: @itemize @bullet @item @code{} is the thread pool count for this scheduler instance. @item @code{$} is an optional priority for the worker threads of a thread pool according to @code{pthread_setschedparam}. In case a priority value is omitted, then a worker thread will inherit the priority of the OpenMP master thread that created it. The priority of the worker thread is not changed after creation, even if a new OpenMP master thread using the worker has a different priority. @item @code{@@} is the scheduler instance name according to the RTEMS application configuration. @end itemize In case no thread pool configuration is specified for a scheduler instance, then each OpenMP master thread of this scheduler instance will use its own dynamically allocated thread pool. To limit the worker thread count of the thread pools, each OpenMP master thread must call @code{omp_set_num_threads}. @item @emph{Example}: Lets suppose we have three scheduler instances @code{IO}, @code{WRK0}, and @code{WRK1} with @env{GOMP_RTEMS_THREAD_POOLS} set to @code{"1@@WRK0:3$4@@WRK1"}. Then there are no thread pool restrictions for scheduler instance @code{IO}. In the scheduler instance @code{WRK0} there is one thread pool available. Since no priority is specified for this scheduler instance, the worker thread inherits the priority of the OpenMP master thread that created it. In the scheduler instance @code{WRK1} there are three thread pools available and their worker threads run at priority four. @end table @c --------------------------------------------------------------------- @c Enabling OpenACC @c --------------------------------------------------------------------- @node Enabling OpenACC @chapter Enabling OpenACC To activate the OpenACC extensions for C/C++ and Fortran, the compile-time flag @option{-fopenacc} must be specified. This enables the OpenACC directive @code{#pragma acc} in C/C++ and @code{!$accp} directives in free form, @code{c$acc}, @code{*$acc} and @code{!$acc} directives in fixed form, @code{!$} conditional compilation sentinels in free form and @code{c$}, @code{*$} and @code{!$} sentinels in fixed form, for Fortran. The flag also arranges for automatic linking of the OpenACC runtime library (@ref{OpenACC Runtime Library Routines}). A complete description of all OpenACC directives accepted may be found in the @uref{http://www.openacc.org/, OpenACC} Application Programming Interface manual, version 2.0. Note that this is an experimental feature and subject to change in future versions of GCC. See @uref{https://gcc.gnu.org/wiki/OpenACC} for more information. @c --------------------------------------------------------------------- @c OpenACC Runtime Library Routines @c --------------------------------------------------------------------- @node OpenACC Runtime Library Routines @chapter OpenACC Runtime Library Routines The runtime routines described here are defined by section 3 of the OpenACC specifications in version 2.0. They have C linkage, and do not throw exceptions. Generally, they are available only for the host, with the exception of @code{acc_on_device}, which is available for both the host and the acceleration device. @menu * acc_get_num_devices:: Get number of devices for the given device type. * acc_set_device_type:: Set type of device accelerator to use. * acc_get_device_type:: Get type of device accelerator to be used. * acc_set_device_num:: Set device number to use. * acc_get_device_num:: Get device number to be used. * acc_async_test:: Tests for completion of a specific asynchronous operation. * acc_async_test_all:: Tests for completion of all asychronous operations. * acc_wait:: Wait for completion of a specific asynchronous operation. * acc_wait_all:: Waits for completion of all asyncrhonous operations. * acc_wait_all_async:: Wait for completion of all asynchronous operations. * acc_wait_async:: Wait for completion of asynchronous operations. * acc_init:: Initialize runtime for a specific device type. * acc_shutdown:: Shuts down the runtime for a specific device type. * acc_on_device:: Whether executing on a particular device * acc_malloc:: Allocate device memory. * acc_free:: Free device memory. * acc_copyin:: Allocate device memory and copy host memory to it. * acc_present_or_copyin:: If the data is not present on the device, allocate device memory and copy from host memory. * acc_create:: Allocate device memory and map it to host memory. * acc_present_or_create:: If the data is not present on the device, allocate device memory and map it to host memory. * acc_copyout:: Copy device memory to host memory. * acc_delete:: Free device memory. * acc_update_device:: Update device memory from mapped host memory. * acc_update_self:: Update host memory from mapped device memory. * acc_map_data:: Map previously allocated device memory to host memory. * acc_unmap_data:: Unmap device memory from host memory. * acc_deviceptr:: Get device pointer associated with specific host address. * acc_hostptr:: Get host pointer associated with specific device address. * acc_is_present:: Indiciate whether host variable / array is present on device. * acc_memcpy_to_device:: Copy host memory to device memory. * acc_memcpy_from_device:: Copy device memory to host memory. API routines for target platforms. * acc_get_current_cuda_device:: Get CUDA device handle. * acc_get_current_cuda_context::Get CUDA context handle. * acc_get_cuda_stream:: Get CUDA stream handle. * acc_set_cuda_stream:: Set CUDA stream handle. @end menu @node acc_get_num_devices @section @code{acc_get_num_devices} -- Get number of devices for given device type @table @asis @item @emph{Description} This function returns a value indicating the number of devices available for the device type specified in @var{devicetype}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int acc_get_num_devices(acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{integer function acc_get_num_devices(devicetype)} @item @tab @code{integer(kind=acc_device_kind) devicetype} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.1. @end table @node acc_set_device_type @section @code{acc_set_device_type} -- Set type of device accelerator to use. @table @asis @item @emph{Description} This function indicates to the runtime library which device typr, specified in @var{devicetype}, to use when executing a parallel or kernels region. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_set_device_type(acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_set_device_type(devicetype)} @item @tab @code{integer(kind=acc_device_kind) devicetype} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.2. @end table @node acc_get_device_type @section @code{acc_get_device_type} -- Get type of device accelerator to be used. @table @asis @item @emph{Description} This function returns what device type will be used when executing a parallel or kernels region. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_device_t acc_get_device_type(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{function acc_get_device_type(void)} @item @tab @code{integer(kind=acc_device_kind) acc_get_device_type} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.3. @end table @node acc_set_device_num @section @code{acc_set_device_num} -- Set device number to use. @table @asis @item @emph{Description} This function will indicate to the runtime which device number, specified by @var{num}, associated with the specifed device type @var{devicetype}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_set_device_num(int num, acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_set_device_num(devicenum, devicetype)} @item @tab @code{integer devicenum} @item @tab @code{integer(kind=acc_device_kind) devicetype} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.4. @end table @node acc_get_device_num @section @code{acc_get_device_num} -- Get device number to be used. @table @asis @item @emph{Description} This function returns which device number associated with the specified device type @var{devicetype}, will be used when executing a parallel or kernels region. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int acc_get_device_num(acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{function acc_get_device_num(devicetype)} @item @tab @code{integer(kind=acc_device_kind) devicetype} @item @tab @code{integer acc_get_device_num} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.5. @end table @node acc_async_test @section @code{acc_async_test} -- Test for completion of a specific asynchronous operation. @table @asis @item @emph{Description} This function tests for completion of the asynchrounous operation specified in @var{arg}. In C/C++, a non-zero value will be returned to indicate the specified asynchronous operation has completed. While Fortran will return a @code{true}. If the asynchrounous operation has not completed, C/C++ returns a zero and Fortran returns a @code{false}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int acc_async_test(int arg);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{function acc_async_test(arg)} @item @tab @code{integer(kind=acc_handle_kind) arg} @item @tab @code{logical acc_async_test} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.6. @end table @node acc_async_test_all @section @code{acc_async_test_all} -- Tests for completion of all asynchronous operations. @table @asis @item @emph{Description} This function tests for completion of all asynchrounous operations. In C/C++, a non-zero value will be returned to indicate all asynchronous operations have completed. While Fortran will return a @code{true}. If any asynchronous operation has not completed, C/C++ returns a zero and Fortran returns a @code{false}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int acc_async_test_all(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{function acc_async_test()} @item @tab @code{logical acc_get_device_num} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.7. @end table @node acc_wait @section @code{acc_wait} -- Wait for completion of a specific asynchronous operation. @table @asis @item @emph{Description} This function waits for completion of the asynchronous operation specified in @var{arg}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_wait(arg);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_wait(arg)} @item @tab @code{integer(acc_handle_kind) arg} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.8. @end table @node acc_wait_all @section @code{acc_wait_all} -- Waits for completion of all asynchronous operations. @table @asis @item @emph{Description} This function waits for the completion of all asynchronous operations. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_wait_all(void);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_wait_async()} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.10. @end table @node acc_wait_all_async @section @code{acc_wait_all_async} -- Wait for completion of all asynchronous operations. @table @asis @item @emph{Description} This function enqueues a wait operation on the queue @var{async} for any and all asynchronous operations that have been previously enqueued on any queue. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_wait_all_async(int async);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_wait_all_async(async)} @item @tab @code{integer(acc_handle_kind) async} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.11. @end table @node acc_wait_async @section @code{acc_wait_async} -- Wait for completion of asynchronous operations. @table @asis @item @emph{Description} This function enqueues a wait operation on queue @var{async} for any and all asynchronous operations enqueued on queue @var{arg}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_wait_async(int arg, int async);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_wait_async(arg, async)} @item @tab @code{integer(acc_handle_kind) arg, async} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.9. @end table @node acc_init @section @code{acc_init} -- Initialize runtime for a specific device type. @table @asis @item @emph{Description} This function initializes the runtime for the device type specified in @var{devicetype}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_init(acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_init(devicetype)} @item @tab @code{integer(acc_device_kind) devicetype} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.12. @end table @node acc_shutdown @section @code{acc_shutdown} -- Shuts down the runtime for a specific device type. @table @asis @item @emph{Description} This function shuts down the runtime for the device type specified in @var{devicetype}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_shutdown(acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_shutdown(devicetype)} @item @tab @code{integer(acc_device_kind) devicetype} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.13. @end table @node acc_on_device @section @code{acc_on_device} -- Whether executing on a particular device @table @asis @item @emph{Description}: This function returns whether the program is executing on a particular device specified in @var{devicetype}. In C/C++ a non-zero value is returned to indicate the device is execiting on the specified device type. In Fortran, @code{true} will be returned. If the program is not executing on the specified device type C/C++ will return a zero, while Fortran will return @code{false}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_on_device(acc_device_t devicetype);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{function acc_on_device(devicetype)} @item @tab @code{integer(acc_device_kind) devicetype} @item @tab @code{logical acc_on_device} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.14. @end table @node acc_malloc @section @code{acc_malloc} -- Allocate device memory. @table @asis @item @emph{Description} This function allocates @var{len} bytes of device memory. It returns the device address of the allocated memory. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{d_void* acc_malloc(size_t len);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.15. @end table @node acc_free @section @code{acc_free} -- Free device memory. @table @asis @item @emph{Description} Free previously allocated device memory at the device address @code{a}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_free(d_void *a);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.16. @end table @node acc_copyin @section @code{acc_copyin} -- Allocate device memory and copy host memory to it. @table @asis @item @emph{Description} In C/C++, this function allocates @var{len} bytes of device memory and maps it to the specified host address in @var{a}. The device address of the newly allocated device memory is returned. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_copyin(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_copyin(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_copyin(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.17. @end table @node acc_present_or_copyin @section @code{acc_present_or_copyin} -- If the data is not present on the device, allocate device memory and copy from host memory. @table @asis @item @emph{Description} This function tests if the host data specifed by @var{a} and of length @var{len} is present or not. If it is not present, then device memory will be allocated and the host memory copied. The device address of the newly allocated device memory is returned. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_present_or_copyin(h_void *a, size_t len);} @item @emph{Prototype}: @tab @code{void *acc_pcopyin(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_present_or_copyin(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_present_or_copyin(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @item @emph{Interface}: @tab @code{subroutine acc_pcopyin(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_pcopyin(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.18. @end table @node acc_create @section @code{acc_create} -- Allocate device memory and map it to host memory. @table @asis @item @emph{Description} This function allocates device memory and maps it to host memory specified by the host address @var{a} with a length of @var{len} bytes. In C/C++, the function returns the device address of the allocated device memory. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_create(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_create(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_create(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.19. @end table @node acc_present_or_create @section @code{acc_present_or_create} -- If the data is not present on the device, allocate device memory and map it to host memory. @table @asis @item @emph{Description} This function tests if the host data specifed by @var{a} and of length @var{len} is present or not. If it is not present, then device memory will be allocated and mapped to host memory. In C/C++, the device address of the newly allocated device memory is returned. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_present_or_create(h_void *a, size_t len)} @item @emph{Prototype}: @tab @code{void *acc_pcreate(h_void *a, size_t len)} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_present_or_create(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_present_or_create(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @item @emph{Interface}: @tab @code{subroutine acc_pcreate(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_pcreate(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.20. @end table @node acc_copyout @section @code{acc_copyout} -- Copy device memory to host memory. @table @asis @item @emph{Description} This function copies mapped device memory to host memory which is specified by host address @var{a} for a length @var{len} bytes in C/C++. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_copyout(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_copyout(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_copyout(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.21. @end table @node acc_delete @section @code{acc_delete} -- Free device memory. @table @asis @item @emph{Description} This function frees previously allocated device memory specified by the device address @var{a} and the length of @var{len} bytes. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_delete(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_delete(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_delete(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.22. @end table @node acc_update_device @section @code{acc_update_device} -- Update device memory from mapped host memory. @table @asis @item @emph{Description} This function updates the device copy from the previously mapped host memory. The host memory is specified with the host address @var{a} and a length of @var{len} bytes. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_update_device(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_update_device(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_update_device(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.23. @end table @node acc_update_self @section @code{acc_update_self} -- Update host memory from mapped device memory. @table @asis @item @emph{Description} This function updates the host copy from the previously mapped device memory. The host memory is specified with the host address @var{a} and a length of @var{len} bytes. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_update_self(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{subroutine acc_update_self(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @emph{Interface}: @tab @code{subroutine acc_update_self(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.24. @end table @node acc_map_data @section @code{acc_map_data} -- Map previously allocated device memory to host memory. @table @asis @item @emph{Description} This function maps previously allocated device and host memory. The device memory is specified with the device address @var{d}. The host memory is specified with the host address @var{h} and a length of @var{len}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_map_data(h_void *h, d_void *d, size_t len);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.25. @end table @node acc_unmap_data @section @code{acc_unmap_data} -- Unmap device memory from host memory. @table @asis @item @emph{Description} This function unmaps previously mapped device and host memory. The latter specified by @var{h}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_unmap_data(h_void *h);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.26. @end table @node acc_deviceptr @section @code{acc_deviceptr} -- Get device pointer associated with specific host address. @table @asis @item @emph{Description} This function returns the device address that has been mapped to the host address specified by @var{h}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_deviceptr(h_void *h);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.27. @end table @node acc_hostptr @section @code{acc_hostptr} -- Get host pointer associated with specific device address. @table @asis @item @emph{Description} This function returns the host address that has been mapped to the device address specified by @var{d}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_hostptr(d_void *d);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.28. @end table @node acc_is_present @section @code{acc_is_present} -- Indicate whether host variable / array is present on device. @table @asis @item @emph{Description} This function indicates whether the specified host address in @var{a} and a length of @var{len} bytes is present on the device. In C/C++, a non-zero value is returned to indicate the presence of the mapped memory on the device. A zero is returned to indicate the memory is not mapped on the device. In Fortran, two (2) forms are supported. In the first form, @var{a} specifies a contiguous array section. The second form @var{a} specifies a variable or array element and @var{len} specifies the length in bytes. If the host memory is mapped to device memory, then a @code{true} is returned. Otherwise, a @code{false} is return to indicate the mapped memory is not present. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{int acc_is_present(h_void *a, size_t len);} @end multitable @item @emph{Fortran}: @multitable @columnfractions .20 .80 @item @emph{Interface}: @tab @code{function acc_is_present(a)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{logical acc_is_present} @item @emph{Interface}: @tab @code{function acc_is_present(a, len)} @item @tab @code{type, dimension(:[,:]...) :: a} @item @tab @code{integer len} @item @tab @code{logical acc_is_present} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.29. @end table @node acc_memcpy_to_device @section @code{acc_memcpy_to_device} -- Copy host memory to device memory. @table @asis @item @emph{Description} This function copies host memory specified by host address of @var{src} to device memory specified by the device address @var{dest} for a length of @var{bytes} bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_memcpy_to_device(d_void *dest, h_void *src, size_t bytes);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.30. @end table @node acc_memcpy_from_device @section @code{acc_memcpy_from_device} -- Copy device memory to host memory. @table @asis @item @emph{Description} This function copies host memory specified by host address of @var{src} from device memory specified by the device address @var{dest} for a length of @var{bytes} bytes. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_memcpy_from_device(d_void *dest, h_void *src, size_t bytes);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 3.2.31. @end table @node acc_get_current_cuda_device @section @code{acc_get_current_cuda_device} -- Get CUDA device handle. @table @asis @item @emph{Description} This function returns the CUDA device handle. This handle is the same as used by the CUDA Runtime or Driver API's. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{void *acc_get_current_cuda_device(void);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section A.2.1.1. @end table @node acc_get_current_cuda_context @section @code{acc_get_current_cuda_context} -- Get CUDA context handle. @table @asis @item @emph{Description} This function returns the CUDA context handle. This handle is the same as used by the CUDA Runtime or Driver API's. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_get_current_cuda_context(void);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section A.2.1.2. @end table @node acc_get_cuda_stream @section @code{acc_get_cuda_stream} -- Get CUDA stream handle. @table @asis @item @emph{Description} This function returns the CUDA stream handle. This handle is the same as used by the CUDA Runtime or Driver API's. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_get_cuda_stream(void);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section A.2.1.3. @end table @node acc_set_cuda_stream @section @code{acc_set_cuda_stream} -- Set CUDA stream handle. @table @asis @item @emph{Description} This function associates the stream handle specified by @var{stream} with the asynchronous value specified by @var{async}. @item @emph{C/C++}: @multitable @columnfractions .20 .80 @item @emph{Prototype}: @tab @code{acc_set_cuda_stream(int async void *stream);} @end multitable @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section A.2.1.4. @end table @c --------------------------------------------------------------------- @c OpenACC Environment Variables @c --------------------------------------------------------------------- @node OpenACC Environment Variables @chapter OpenACC Environment Variables The variables @env{ACC_DEVICE_TYPE} and @env{ACC_DEVICE_NUM} are defined by section 4 of the OpenACC specification in version 2.0. The variable @env{GCC_ACC_NOTIFY} is used for diagnostic purposes. @menu * ACC_DEVICE_TYPE:: * ACC_DEVICE_NUM:: * GCC_ACC_NOTIFY:: @end menu @node ACC_DEVICE_TYPE @section @code{ACC_DEVICE_TYPE} @table @asis @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 4.1. @end table @node ACC_DEVICE_NUM @section @code{ACC_DEVICE_NUM} @table @asis @item @emph{Reference}: @uref{http://www.openacc.org/, OpenACC specification v2.0}, section 4.2. @end table @node GCC_ACC_NOTIFY @section @code{GCC_ACC_NOTIFY} @table @asis @item @emph{Description}: Print debug information pertaining to the accelerator. @end table @c --------------------------------------------------------------------- @c CUDA Streams Usage @c --------------------------------------------------------------------- @node CUDA Streams Usage @chapter CUDA Streams Usage This applies to the @code{nvptx} plugin only. The library provides elements that perform asynchronous movement of data and asynchronous operation of computing constructs. This asynchronous functionality is implemented by making use of CUDA streams@footnote{See "Stream Management" in "CUDA Driver API", TRM-06703-001, Version 5.5, for additional information}. The primary means by that the asychronous functionality is accessed is through the use of those OpenACC directives which make use of the @code{async} and @code{wait} clauses. When the @code{async} clause is first used with a directive, it creates a CUDA stream. If an @code{async-argument} is used with the @code{async} clause, then the stream is associated with the specified @code{async-argument}. Following the creation of an association between a CUDA stream and the @code{async-argument} of an @code{async} clause, both the @code{wait} clause and the @code{wait} directive can be used. When either the clause or directive is used after stream creation, it creates a rendezvous point whereby execution waits until all operations associated with the @code{async-argument}, that is, stream, have completed. Normally, the management of the streams that are created as a result of using the @code{async} clause, is done without any intervention by the caller. This implies the association between the @code{async-argument} and the CUDA stream will be maintained for the lifetime of the program. However, this association can be changed through the use of the library function @code{acc_set_cuda_stream}. When the function @code{acc_set_cuda_stream} is called, the CUDA stream that was originally associated with the @code{async} clause will be destroyed. Caution should be taken when changing the association as subsequent references to the @code{async-argument} refer to a different CUDA stream. @c --------------------------------------------------------------------- @c OpenACC Library Interoperability @c --------------------------------------------------------------------- @node OpenACC Library Interoperability @chapter OpenACC Library Interoperability @section Introduction The OpenACC library uses the CUDA Driver API, and may interact with programs that use the Runtime library directly, or another library based on the Runtime library, e.g., CUBLAS@footnote{See section 2.26, "Interactions with the CUDA Driver API" in "CUDA Runtime API", Version 5.5, and section 2.27, "VDPAU Interoperability", in "CUDA Driver API", TRM-06703-001, Version 5.5, for additional information on library interoperability.}. This chapter describes the use cases and what changes are required in order to use both the OpenACC library and the CUBLAS and Runtime libraries within a program. @section First invocation: NVIDIA CUBLAS library API In this first use case (see below), a function in the CUBLAS library is called prior to any of the functions in the OpenACC library. More specifically, the function @code{cublasCreate()}. When invoked, the function initializes the library and allocates the hardware resources on the host and the device on behalf of the caller. Once the initialization and allocation has completed, a handle is returned to the caller. The OpenACC library also requires initialization and allocation of hardware resources. Since the CUBLAS library has already allocated the hardware resources for the device, all that is left to do is to initialize the OpenACC library and acquire the hardware resources on the host. Prior to calling the OpenACC function that initializes the library and allocate the host hardware resources, you need to acquire the device number that was allocated during the call to @code{cublasCreate()}. The invoking of the runtime library function @code{cudaGetDevice()} accomplishes this. Once acquired, the device number is passed along with the device type as parameters to the OpenACC library function @code{acc_set_device_num()}. Once the call to @code{acc_set_device_num()} has completed, the OpenACC library uses the context that was created during the call to @code{cublasCreate()}. In other words, both libraries will be sharing the same context. @smallexample /* Create the handle */ s = cublasCreate(&h); if (s != CUBLAS_STATUS_SUCCESS) @{ fprintf(stderr, "cublasCreate failed %d\n", s); exit(EXIT_FAILURE); @} /* Get the device number */ e = cudaGetDevice(&dev); if (e != cudaSuccess) @{ fprintf(stderr, "cudaGetDevice failed %d\n", e); exit(EXIT_FAILURE); @} /* Initialize OpenACC library and use device 'dev' */ acc_set_device_num(dev, acc_device_nvidia); @end smallexample @center Use Case 1 @section First invocation: OpenACC library API In this second use case (see below), a function in the OpenACC library is called prior to any of the functions in the CUBLAS library. More specificially, the function @code{acc_set_device_num()}. In the use case presented here, the function @code{acc_set_device_num()} is used to both initialize the OpenACC library and allocate the hardware resources on the host and the device. In the call to the function, the call parameters specify which device to use and what device type to use, i.e., @code{acc_device_nvidia}. It should be noted that this is but one method to initialize the OpenACC library and allocate the appropriate hardware resources. Other methods are available through the use of environment variables and these will be discussed in the next section. Once the call to @code{acc_set_device_num()} has completed, other OpenACC functions can be called as seen with multiple calls being made to @code{acc_copyin()}. In addition, calls can be made to functions in the CUBLAS library. In the use case a call to @code{cublasCreate()} is made subsequent to the calls to @code{acc_copyin()}. As seen in the previous use case, a call to @code{cublasCreate()} initializes the CUBLAS library and allocates the hardware resources on the host and the device. However, since the device has already been allocated, @code{cublasCreate()} will only initialize the CUBLAS library and allocate the appropriate hardware resources on the host. The context that was created as part of the OpenACC initialization is shared with the CUBLAS library, similarly to the first use case. @smallexample dev = 0; acc_set_device_num(dev, acc_device_nvidia); /* Copy the first set to the device */ d_X = acc_copyin(&h_X[0], N * sizeof (float)); if (d_X == NULL) @{ fprintf(stderr, "copyin error h_X\n"); exit(EXIT_FAILURE); @} /* Copy the second set to the device */ d_Y = acc_copyin(&h_Y1[0], N * sizeof (float)); if (d_Y == NULL) @{ fprintf(stderr, "copyin error h_Y1\n"); exit(EXIT_FAILURE); @} /* Create the handle */ s = cublasCreate(&h); if (s != CUBLAS_STATUS_SUCCESS) @{ fprintf(stderr, "cublasCreate failed %d\n", s); exit(EXIT_FAILURE); @} /* Perform saxpy using CUBLAS library function */ s = cublasSaxpy(h, N, &alpha, d_X, 1, d_Y, 1); if (s != CUBLAS_STATUS_SUCCESS) @{ fprintf(stderr, "cublasSaxpy failed %d\n", s); exit(EXIT_FAILURE); @} /* Copy the results from the device */ acc_memcpy_from_device(&h_Y1[0], d_Y, N * sizeof (float)); @end smallexample @center Use Case 2 @section OpenACC library and environment variables There are two environment variables associated with the OpenACC library that may be used to control the device type and device number: @env{ACC_DEVICE_TYPE} and @env{ACC_DEVICE_NUM}, respecively. These two environement variables can be used as an alternative to calling @code{acc_set_device_num()}. As seen in the second use case, the device type and device number were specified using @code{acc_set_device_num()}. If however, the aforementioned environment variables were set, then the call to @code{acc_set_device_num()} would not be required. The use of the environment variables is only relevant when an OpenACC function is called prior to a call to @code{cudaCreate()}. If @code{cudaCreate()} is called prior to a call to an OpenACC function, then you must call @code{acc_set_device_num()}@footnote{More complete information about @env{ACC_DEVICE_TYPE} and @env{ACC_DEVICE_NUM} can be found in sections 4.1 and 4.2 of the @uref{http://www.openacc.org/, OpenACC} Application Programming Interfaceā€¯, Version 2.0.} @c --------------------------------------------------------------------- @c The libgomp ABI @c --------------------------------------------------------------------- @node The libgomp ABI @chapter The libgomp ABI The following sections present notes on the external ABI as presented by libgomp. Only maintainers should need them. @menu * Implementing MASTER construct:: * Implementing CRITICAL construct:: * Implementing ATOMIC construct:: * Implementing FLUSH construct:: * Implementing BARRIER construct:: * Implementing THREADPRIVATE construct:: * Implementing PRIVATE clause:: * Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses:: * Implementing REDUCTION clause:: * Implementing PARALLEL construct:: * Implementing FOR construct:: * Implementing ORDERED construct:: * Implementing SECTIONS construct:: * Implementing SINGLE construct:: * Implementing OpenACC's PARALLEL construct:: @end menu @node Implementing MASTER construct @section Implementing MASTER construct @smallexample if (omp_get_thread_num () == 0) block @end smallexample Alternately, we generate two copies of the parallel subfunction and only include this in the version run by the master thread. Surely this is not worthwhile though... @node Implementing CRITICAL construct @section Implementing CRITICAL construct Without a specified name, @smallexample void GOMP_critical_start (void); void GOMP_critical_end (void); @end smallexample so that we don't get COPY relocations from libgomp to the main application. With a specified name, use omp_set_lock and omp_unset_lock with name being transformed into a variable declared like @smallexample omp_lock_t gomp_critical_user_ __attribute__((common)) @end smallexample Ideally the ABI would specify that all zero is a valid unlocked state, and so we wouldn't need to initialize this at startup. @node Implementing ATOMIC construct @section Implementing ATOMIC construct The target should implement the @code{__sync} builtins. Failing that we could add @smallexample void GOMP_atomic_enter (void) void GOMP_atomic_exit (void) @end smallexample which reuses the regular lock code, but with yet another lock object private to the library. @node Implementing FLUSH construct @section Implementing FLUSH construct Expands to the @code{__sync_synchronize} builtin. @node Implementing BARRIER construct @section Implementing BARRIER construct @smallexample void GOMP_barrier (void) @end smallexample @node Implementing THREADPRIVATE construct @section Implementing THREADPRIVATE construct In _most_ cases we can map this directly to @code{__thread}. Except that OMP allows constructors for C++ objects. We can either refuse to support this (how often is it used?) or we can implement something akin to .ctors. Even more ideally, this ctor feature is handled by extensions to the main pthreads library. Failing that, we can have a set of entry points to register ctor functions to be called. @node Implementing PRIVATE clause @section Implementing PRIVATE clause In association with a PARALLEL, or within the lexical extent of a PARALLEL block, the variable becomes a local variable in the parallel subfunction. In association with FOR or SECTIONS blocks, create a new automatic variable within the current function. This preserves the semantic of new variable creation. @node Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses @section Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses This seems simple enough for PARALLEL blocks. Create a private struct for communicating between the parent and subfunction. In the parent, copy in values for scalar and "small" structs; copy in addresses for others TREE_ADDRESSABLE types. In the subfunction, copy the value into the local variable. It is not clear what to do with bare FOR or SECTION blocks. The only thing I can figure is that we do something like: @smallexample #pragma omp for firstprivate(x) lastprivate(y) for (int i = 0; i < n; ++i) body; @end smallexample which becomes @smallexample @{ int x = x, y; // for stuff if (i == n) y = y; @} @end smallexample where the "x=x" and "y=y" assignments actually have different uids for the two variables, i.e. not something you could write directly in C. Presumably this only makes sense if the "outer" x and y are global variables. COPYPRIVATE would work the same way, except the structure broadcast would have to happen via SINGLE machinery instead. @node Implementing REDUCTION clause @section Implementing REDUCTION clause The private struct mentioned in the previous section should have a pointer to an array of the type of the variable, indexed by the thread's @var{team_id}. The thread stores its final value into the array, and after the barrier, the master thread iterates over the array to collect the values. @node Implementing PARALLEL construct @section Implementing PARALLEL construct @smallexample #pragma omp parallel @{ body; @} @end smallexample becomes @smallexample void subfunction (void *data) @{ use data; body; @} setup data; GOMP_parallel_start (subfunction, &data, num_threads); subfunction (&data); GOMP_parallel_end (); @end smallexample @smallexample void GOMP_parallel_start (void (*fn)(void *), void *data, unsigned num_threads) @end smallexample The @var{FN} argument is the subfunction to be run in parallel. The @var{DATA} argument is a pointer to a structure used to communicate data in and out of the subfunction, as discussed above with respect to FIRSTPRIVATE et al. The @var{NUM_THREADS} argument is 1 if an IF clause is present and false, or the value of the NUM_THREADS clause, if present, or 0. The function needs to create the appropriate number of threads and/or launch them from the dock. It needs to create the team structure and assign team ids. @smallexample void GOMP_parallel_end (void) @end smallexample Tears down the team and returns us to the previous @code{omp_in_parallel()} state. @node Implementing FOR construct @section Implementing FOR construct @smallexample #pragma omp parallel for for (i = lb; i <= ub; i++) body; @end smallexample becomes @smallexample void subfunction (void *data) @{ long _s0, _e0; while (GOMP_loop_static_next (&_s0, &_e0)) @{ long _e1 = _e0, i; for (i = _s0; i < _e1; i++) body; @} GOMP_loop_end_nowait (); @} GOMP_parallel_loop_static (subfunction, NULL, 0, lb, ub+1, 1, 0); subfunction (NULL); GOMP_parallel_end (); @end smallexample @smallexample #pragma omp for schedule(runtime) for (i = 0; i < n; i++) body; @end smallexample becomes @smallexample @{ long i, _s0, _e0; if (GOMP_loop_runtime_start (0, n, 1, &_s0, &_e0)) do @{ long _e1 = _e0; for (i = _s0, i < _e0; i++) body; @} while (GOMP_loop_runtime_next (&_s0, _&e0)); GOMP_loop_end (); @} @end smallexample Note that while it looks like there is trickiness to propagating a non-constant STEP, there isn't really. We're explicitly allowed to evaluate it as many times as we want, and any variables involved should automatically be handled as PRIVATE or SHARED like any other variables. So the expression should remain evaluable in the subfunction. We can also pull it into a local variable if we like, but since its supposed to remain unchanged, we can also not if we like. If we have SCHEDULE(STATIC), and no ORDERED, then we ought to be able to get away with no work-sharing context at all, since we can simply perform the arithmetic directly in each thread to divide up the iterations. Which would mean that we wouldn't need to call any of these routines. There are separate routines for handling loops with an ORDERED clause. Bookkeeping for that is non-trivial... @node Implementing ORDERED construct @section Implementing ORDERED construct @smallexample void GOMP_ordered_start (void) void GOMP_ordered_end (void) @end smallexample @node Implementing SECTIONS construct @section Implementing SECTIONS construct A block as @smallexample #pragma omp sections @{ #pragma omp section stmt1; #pragma omp section stmt2; #pragma omp section stmt3; @} @end smallexample becomes @smallexample for (i = GOMP_sections_start (3); i != 0; i = GOMP_sections_next ()) switch (i) @{ case 1: stmt1; break; case 2: stmt2; break; case 3: stmt3; break; @} GOMP_barrier (); @end smallexample @node Implementing SINGLE construct @section Implementing SINGLE construct A block like @smallexample #pragma omp single @{ body; @} @end smallexample becomes @smallexample if (GOMP_single_start ()) body; GOMP_barrier (); @end smallexample while @smallexample #pragma omp single copyprivate(x) body; @end smallexample becomes @smallexample datap = GOMP_single_copy_start (); if (datap == NULL) @{ body; data.x = x; GOMP_single_copy_end (&data); @} else x = datap->x; GOMP_barrier (); @end smallexample @node Implementing OpenACC's PARALLEL construct @section Implementing OpenACC's PARALLEL construct @smallexample void GOACC_parallel () @end smallexample @c --------------------------------------------------------------------- @c Reporting Bugs @c --------------------------------------------------------------------- @node Reporting Bugs @chapter Reporting Bugs Bugs in the GNU Offloading and Multi Processing Runtime Library should be reported via @uref{http://gcc.gnu.org/bugzilla/, Bugzilla}. Please add "openacc", or "openmp", or both to the keywords field in the bug report, as appropriate. @c --------------------------------------------------------------------- @c GNU General Public License @c --------------------------------------------------------------------- @include gpl_v3.texi @c --------------------------------------------------------------------- @c GNU Free Documentation License @c --------------------------------------------------------------------- @include fdl.texi @c --------------------------------------------------------------------- @c Funding Free Software @c --------------------------------------------------------------------- @include funding.texi @c --------------------------------------------------------------------- @c Index @c --------------------------------------------------------------------- @node Library Index @unnumbered Library Index @printindex cp @bye