gcc/libstdc++-v3/acinclude.m4

1785 lines
59 KiB
Plaintext
Raw Blame History

dnl
dnl GLIBCXX_CONDITIONAL (NAME, SHELL-TEST)
dnl
dnl Exactly like AM_CONDITIONAL, but delays evaluation of the test until the
dnl end of configure. This lets tested variables be reassigned, and the
dnl conditional will depend on the final state of the variable. For a simple
dnl example of why this is needed, see GLIBCXX_ENABLE_HOSTED.
dnl
m4_define([_m4_divert(glibcxx_diversion)], 8000)dnl
AC_DEFUN([GLIBCXX_CONDITIONAL], [dnl
m4_divert_text([glibcxx_diversion],dnl
AM_CONDITIONAL([$1],[$2])
)dnl
])dnl
AC_DEFUN([GLIBCXX_EVALUATE_CONDITIONALS], [m4_undivert([glibcxx_diversion])])dnl
dnl
dnl Check to see what architecture and operating system we are compiling
dnl for. Also, if architecture- or OS-specific flags are required for
dnl compilation, pick them up here.
dnl
AC_DEFUN([GLIBCXX_CHECK_HOST], [
. $glibcxx_srcdir/configure.host
AC_MSG_NOTICE([CPU config directory is $cpu_include_dir])
AC_MSG_NOTICE([OS config directory is $os_include_dir])
])
dnl
dnl Initialize the rest of the library configury. At this point we have
dnl variables like $host.
dnl
dnl Sets:
dnl gcc_version (x.y.z format)
dnl SUBDIRS
dnl Substs:
dnl glibcxx_builddir (absolute path)
dnl glibcxx_srcdir (absolute path)
dnl toplevel_srcdir (absolute path)
dnl with_cross_host
dnl with_newlib
dnl with_target_subdir
dnl plus
dnl - the variables in GLIBCXX_CHECK_HOST / configure.host
dnl - default settings for all AM_CONFITIONAL test variables
dnl - lots of tools, like CC and CXX
dnl
AC_DEFUN([GLIBCXX_CONFIGURE], [
# Keep these sync'd with the list in Makefile.am. The first provides an
# expandable list at autoconf time; the second provides an expandable list
# (i.e., shell variable) at configure time.
m4_define([glibcxx_SUBDIRS],[include libmath libsupc++ src po testsuite])
SUBDIRS='glibcxx_SUBDIRS'
# These need to be absolute paths, yet at the same time need to
# canonicalize only relative paths, because then amd will not unmount
# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
glibcxx_builddir=`${PWDCMD-pwd}`
case $srcdir in
[\\/$]* | ?:[\\/]*) glibcxx_srcdir=${srcdir} ;;
*) glibcxx_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
esac
toplevel_srcdir=${glibcxx_srcdir}/..
AC_SUBST(glibcxx_builddir)
AC_SUBST(glibcxx_srcdir)
AC_SUBST(toplevel_srcdir)
# We use these options to decide which functions to include. They are
# set from the top level.
AC_ARG_WITH([target-subdir],
AC_HELP_STRING([--with-target-subdir=SUBDIR],
[configuring in a subdirectory]))
AC_ARG_WITH([cross-host],
AC_HELP_STRING([--with-cross-host=HOST],
[configuring with a cross compiler]))
AC_ARG_WITH([newlib],
AC_HELP_STRING([--with-newlib],
[assume newlib as a system C library]))
# We're almost certainly being configured before anything else which uses
# C++, so all of our AC_PROG_* discoveries will be cached. It's vital that
# we not cache the value of CXX that we "discover" here, because it's set
# to something unique for us and libjava. Other target libraries need to
# find CXX for themselves. We yank the rug out from under the normal AC_*
# process by sneakily renaming the cache variable. This also lets us debug
# the value of "our" CXX in postmortems.
#
# We must also force CXX to /not/ be a precious variable, otherwise the
# wrong (non-multilib-adjusted) value will be used in multilibs. This
# little trick also affects CPPFLAGS, CXXFLAGS, and LDFLAGS. And as a side
# effect, CXXFLAGS is no longer automagically subst'd, so we have to do
# that ourselves. Un-preciousing AC_PROG_CC also affects CC and CFLAGS.
#
# -fno-builtin must be present here so that a non-conflicting form of
# std::exit can be guessed by AC_PROG_CXX, and used in later tests.
m4_define([ac_cv_prog_CXX],[glibcxx_cv_prog_CXX])
m4_rename([_AC_ARG_VAR_PRECIOUS],[glibcxx_PRECIOUS])
m4_define([_AC_ARG_VAR_PRECIOUS],[])
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-builtin"
AC_PROG_CC
AC_PROG_CXX
CXXFLAGS="$save_CXXFLAGS"
m4_rename([glibcxx_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
# For directory versioning (e.g., headers) and other variables.
AC_MSG_CHECKING([for GCC version number])
gcc_version=`$CXX -dumpversion`
AC_MSG_RESULT($gcc_version)
# Will set LN_S to either 'ln -s', 'ln', or 'cp -p' (if linking isn't
# available). Uncomment the next line to force a particular method.
AC_PROG_LN_S
#LN_S='cp -p'
AC_CHECK_TOOL(AS, as)
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error)
AM_MAINTAINER_MODE
# Set up safe default values for all subsequent AM_CONDITIONAL tests
# which are themselves conditionally expanded.
## (Right now, this only matters for enable_wchar_t, but nothing prevents
## other macros from doing the same. This should be automated.) -pme
need_libmath=no
enable_wchar_t=no
#enable_libstdcxx_debug=no
#enable_libstdcxx_pch=no
#enable_cheaders=c
#c_compatibility=no
#enable_abi_check=no
#enable_symvers=no
#enable_hosted_libstdcxx=yes
# Find platform-specific directories containing configuration info.
# Also possibly modify flags used elsewhere, as needed by the platform.
GLIBCXX_CHECK_HOST
])
m4_include([linkage.m4])
m4_include([../config/no-executables.m4])
dnl
dnl Tests for newer compiler features, or features that are present in newer
dnl compiler versions but not older compiler versions still in use, should
dnl be placed here.
dnl
dnl Defines:
dnl WERROR='-Werror' if requested and possible; g++'s that lack the
dnl new inlining code or the new system_header pragma will die on -Werror.
dnl Leave it out by default and use maint-mode to use it.
dnl SECTION_FLAGS='-ffunction-sections -fdata-sections' if
dnl compiler supports it and the user has not requested debug mode.
dnl
AC_DEFUN([GLIBCXX_CHECK_COMPILER_FEATURES], [
# All these tests are for C++; save the language and the compiler flags.
# The CXXFLAGS thing is suspicious, but based on similar bits previously
# found in GLIBCXX_CONFIGURE.
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
# Check for maintainer-mode bits.
if test x"$USE_MAINTAINER_MODE" = xno; then
WERROR=''
else
WERROR='-Werror'
fi
# Check for -ffunction-sections -fdata-sections
AC_MSG_CHECKING([for g++ that supports -ffunction-sections -fdata-sections])
CXXFLAGS='-Werror -ffunction-sections -fdata-sections'
AC_TRY_COMPILE(, [int foo;], [ac_fdsections=yes], [ac_fdsections=no])
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS="$ac_save_CXXFLAGS"
else
# this is the suspicious part
CXXFLAGS=''
fi
if test x"$ac_fdsections" = x"yes"; then
SECTION_FLAGS='-ffunction-sections -fdata-sections'
fi
AC_MSG_RESULT($ac_fdsections)
AC_LANG_RESTORE
AC_SUBST(WERROR)
AC_SUBST(SECTION_FLAGS)
])
dnl
dnl If GNU ld is in use, check to see if tricky linker opts can be used. If
dnl the native linker is in use, all variables will be defined to something
dnl safe (like an empty string).
dnl
dnl Defines:
dnl SECTION_LDFLAGS='-Wl,--gc-sections' if possible
dnl OPT_LDFLAGS='-Wl,-O1' if possible
dnl LD (as a side effect of testing)
dnl Sets:
dnl with_gnu_ld
dnl glibcxx_gnu_ld_version (possibly)
dnl
dnl The last will be a single integer, e.g., version 1.23.45.0.67.89 will
dnl set glibcxx_gnu_ld_version to 12345. Zeros cause problems.
dnl
AC_DEFUN([GLIBCXX_CHECK_LINKER_FEATURES], [
# If we're not using GNU ld, then there's no point in even trying these
# tests. Check for that first. We should have already tested for gld
# by now (in libtool), but require it now just to be safe...
test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
AC_REQUIRE([AC_PROG_LD])
AC_REQUIRE([AC_PROG_AWK])
# The name set by libtool depends on the version of libtool. Shame on us
# for depending on an impl detail, but c'est la vie. Older versions used
# ac_cv_prog_gnu_ld, but now it's lt_cv_prog_gnu_ld, and is copied back on
# top of with_gnu_ld (which is also set by --with-gnu-ld, so that actually
# makes sense). We'll test with_gnu_ld everywhere else, so if that isn't
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
# We got through "ac_require(ac_prog_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
fi
fi
# Start by getting the version number. I think the libtool test already
# does some of this, but throws away the result.
changequote(,)
ldver=`$LD --version 2>/dev/null | head -1 | \
sed -e 's/GNU ld version \([0-9.][0-9.]*\).*/\1/'`
changequote([,])
glibcxx_gnu_ld_version=`echo $ldver | \
$AWK -F. '{ if (NF<3) [$]3=0; print ([$]1*100+[$]2)*100+[$]3 }'`
# Set --gc-sections.
if test "$with_gnu_ld" = "notbroken"; then
# GNU ld it is! Joy and bunny rabbits!
# All these tests are for C++; save the language and the compiler flags.
# Need to do this so that g++ won't try to link in libstdc++
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS='-x c++ -Wl,--gc-sections'
# Check for -Wl,--gc-sections
# XXX This test is broken at the moment, as symbols required for linking
# are now in libsupc++ (not built yet). In addition, this test has
# cored on solaris in the past. In addition, --gc-sections doesn't
# really work at the moment (keeps on discarding used sections, first
# .eh_frame and now some of the glibc sections for iconv).
# Bzzzzt. Thanks for playing, maybe next time.
AC_MSG_CHECKING([for ld that supports -Wl,--gc-sections])
AC_TRY_RUN([
int main(void)
{
try { throw 1; }
catch (...) { };
return 0;
}
], [ac_sectionLDflags=yes],[ac_sectionLDflags=no], [ac_sectionLDflags=yes])
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
else
# this is the suspicious part
CFLAGS=''
fi
if test "$ac_sectionLDflags" = "yes"; then
SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS"
fi
AC_MSG_RESULT($ac_sectionLDflags)
fi
# Set linker optimization flags.
if test x"$with_gnu_ld" = x"yes"; then
OPT_LDFLAGS="-Wl,-O1 $OPT_LDFLAGS"
fi
AC_SUBST(SECTION_LDFLAGS)
AC_SUBST(OPT_LDFLAGS)
])
dnl
dnl Check to see if this target can enable the wchar_t parts.
dnl If --disable-c-mbchar was given, no wchar_t stuff is enabled. (This
dnl must have been previously checked.) By default, wide characters are
dnl disabled.
dnl
dnl Defines:
dnl HAVE_MBSTATE_T if mbstate_t is not in wchar.h
dnl _GLIBCXX_USE_WCHAR_T if all the bits are found.
dnl Substs:
dnl LIBICONV to a -l string containing the iconv library, if needed.
dnl
AC_DEFUN([GLIBCXX_CHECK_WCHAR_T_SUPPORT], [
# Test wchar.h for mbstate_t, which is needed for char_traits and
# others even if wchar_t support is not on.
AC_MSG_CHECKING([for mbstate_t])
AC_TRY_COMPILE([#include <wchar.h>],
[mbstate_t teststate;],
have_mbstate_t=yes, have_mbstate_t=no)
AC_MSG_RESULT($have_mbstate_t)
if test x"$have_mbstate_t" = xyes; then
AC_DEFINE(HAVE_MBSTATE_T)
fi
# Sanity check for existence of ISO C99 headers for extended encoding.
AC_CHECK_HEADERS(wchar.h, ac_has_wchar_h=yes, ac_has_wchar_h=no)
AC_CHECK_HEADERS(wctype.h, ac_has_wctype_h=yes, ac_has_wctype_h=no)
# Only continue checking if the ISO C99 headers exist and support is on.
if test x"$ac_has_wchar_h" = xyes &&
test x"$ac_has_wctype_h" = xyes &&
test x"$enable_c_mbchar" != xno; then
# Test wchar.h for WCHAR_MIN, WCHAR_MAX, which is needed before
# numeric_limits can instantiate type_traits<wchar_t>
AC_MSG_CHECKING([for WCHAR_MIN and WCHAR_MAX])
AC_TRY_COMPILE([#include <wchar.h>],
[int i = WCHAR_MIN; int j = WCHAR_MAX;],
has_wchar_minmax=yes, has_wchar_minmax=no)
AC_MSG_RESULT($has_wchar_minmax)
# Test wchar.h for WEOF, which is what we use to determine whether
# to specialize for char_traits<wchar_t> or not.
AC_MSG_CHECKING([for WEOF])
AC_TRY_COMPILE([
#include <wchar.h>
#include <stddef.h>],
[wint_t i = WEOF;],
has_weof=yes, has_weof=no)
AC_MSG_RESULT($has_weof)
# Tests for wide character functions used in char_traits<wchar_t>.
ac_wfuncs=yes
AC_CHECK_FUNCS([wcslen wmemchr wmemcmp wmemcpy wmemmove wmemset],
[],[ac_wfuncs=no])
# Checks for names injected into std:: by the c_std headers.
AC_CHECK_FUNCS([btowc wctob fgetwc fgetws fputwc fputws fwide \
fwprintf fwscanf swprintf swscanf vfwprintf vswprintf \
vwprintf wprintf wscanf getwc getwchar mbsinit mbrlen mbrtowc \
mbsrtowcs wcsrtombs putwc putwchar ungetwc wcrtomb wcstod wcstol \
wcstoul wcscpy wcsncpy wcscat wcsncat wcscmp wcscoll wcsncmp wcsxfrm \
wcscspn wcsspn wcstok wcsftime wcschr wcspbrk wcsrchr wcsstr],
[],[ac_wfuncs=no])
# Checks for wide character functions that are not required
# for basic wchar_t support. Don't disable support if they are missing.
# Injection of these is wrapped with guard macros.
AC_CHECK_FUNCS([vfwscanf vswscanf vwscanf wcstof iswblank],[],[])
AC_MSG_CHECKING([for ISO C99 wchar_t support])
if test x"$has_weof" = xyes &&
test x"$has_wchar_minmax" = xyes &&
test x"$ac_wfuncs" = xyes;
then
ac_isoC99_wchar_t=yes
else
ac_isoC99_wchar_t=no
fi
AC_MSG_RESULT($ac_isoC99_wchar_t)
# Use iconv for wchar_t to char conversions. As such, check for
# X/Open Portability Guide, version 2 features (XPG2).
AC_CHECK_HEADER(iconv.h, ac_has_iconv_h=yes, ac_has_iconv_h=no)
AC_CHECK_HEADER(langinfo.h, ac_has_langinfo_h=yes, ac_has_langinfo_h=no)
# Check for existence of libiconv.a providing XPG2 wchar_t support.
AC_CHECK_LIB(iconv, iconv, LIBICONV="-liconv")
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LIBICONV"
AC_SUBST(LIBICONV)
AC_CHECK_FUNCS([iconv_open iconv_close iconv nl_langinfo],
[ac_XPG2funcs=yes], [ac_XPG2funcs=no])
LIBS="$ac_save_LIBS"
AC_MSG_CHECKING([for XPG2 wchar_t support])
if test x"$ac_has_iconv_h" = xyes &&
test x"$ac_has_langinfo_h" = xyes &&
test x"$ac_XPG2funcs" = xyes;
then
ac_XPG2_wchar_t=yes
else
ac_XPG2_wchar_t=no
fi
AC_MSG_RESULT($ac_XPG2_wchar_t)
# At the moment, only enable wchar_t specializations if all the
# above support is present.
if test x"$ac_isoC99_wchar_t" = xyes &&
test x"$ac_XPG2_wchar_t" = xyes;
then
AC_DEFINE(_GLIBCXX_USE_WCHAR_T)
enable_wchar_t=yes
fi
fi
AC_MSG_CHECKING([for enabled wchar_t specializations])
AC_MSG_RESULT($enable_wchar_t)
])
dnl
dnl Check for headers for, and arguments to, the setrlimit() function.
dnl Used only in testsuite_hooks.h. Called from GLIBCXX_CONFIGURE_TESTSUITE.
dnl
dnl Defines:
dnl _GLIBCXX_RES_LIMITS if we can set artificial resource limits
dnl various HAVE_LIMIT_* for individual limit names
dnl
AC_DEFUN([GLIBCXX_CHECK_SETRLIMIT_ancilliary], [
AC_TRY_COMPILE(
[#include <unistd.h>
#include <sys/time.h>
#include <sys/resource.h>
],
[ int f = RLIMIT_$1 ; ],
[glibcxx_mresult=1], [glibcxx_mresult=0])
AC_DEFINE_UNQUOTED(HAVE_LIMIT_$1, $glibcxx_mresult,
[Only used in build directory testsuite_hooks.h.])
])
AC_DEFUN([GLIBCXX_CHECK_SETRLIMIT], [
setrlimit_have_headers=yes
AC_CHECK_HEADERS(unistd.h sys/time.h sys/resource.h,
[],
[setrlimit_have_headers=no])
# If don't have the headers, then we can't run the tests now, and we
# won't be seeing any of these during testsuite compilation.
if test $setrlimit_have_headers = yes; then
# Can't do these in a loop, else the resulting syntax is wrong.
GLIBCXX_CHECK_SETRLIMIT_ancilliary(DATA)
GLIBCXX_CHECK_SETRLIMIT_ancilliary(RSS)
GLIBCXX_CHECK_SETRLIMIT_ancilliary(VMEM)
GLIBCXX_CHECK_SETRLIMIT_ancilliary(AS)
GLIBCXX_CHECK_SETRLIMIT_ancilliary(FSIZE)
# Check for rlimit, setrlimit.
AC_CACHE_VAL(ac_setrlimit, [
AC_TRY_COMPILE(
[#include <unistd.h>
#include <sys/time.h>
#include <sys/resource.h>
],
[struct rlimit r;
setrlimit(0, &r);],
[ac_setrlimit=yes], [ac_setrlimit=no])
])
fi
AC_MSG_CHECKING([for testsuite resource limits support])
if test $setrlimit_have_headers = yes && test $ac_setrlimit = yes; then
ac_res_limits=yes
AC_DEFINE(_GLIBCXX_RES_LIMITS)
else
ac_res_limits=no
fi
AC_MSG_RESULT($ac_res_limits)
])
dnl
dnl Check whether S_ISREG (Posix) or S_IFREG is available in <sys/stat.h>.
dnl Define HAVE_S_ISREG / HAVE_S_IFREG appropriately.
dnl
AC_DEFUN([GLIBCXX_CHECK_S_ISREG_OR_S_IFREG], [
AC_CACHE_VAL(glibcxx_cv_S_ISREG, [
AC_TRY_LINK(
[#include <sys/stat.h>],
[struct stat buffer;
fstat(0, &buffer);
S_ISREG(buffer.st_mode);],
[glibcxx_cv_S_ISREG=yes],
[glibcxx_cv_S_ISREG=no])
])
AC_CACHE_VAL(glibcxx_cv_S_IFREG, [
AC_TRY_LINK(
[#include <sys/stat.h>],
[struct stat buffer;
fstat(0, &buffer);
S_IFREG & buffer.st_mode;],
[glibcxx_cv_S_IFREG=yes],
[glibcxx_cv_S_IFREG=no])
])
if test $glibcxx_cv_S_ISREG = yes; then
AC_DEFINE(HAVE_S_ISREG)
elif test $glibcxx_cv_S_IFREG = yes; then
AC_DEFINE(HAVE_S_IFREG)
fi
])
dnl
dnl Check whether poll is available in <poll.h>, and define HAVE_POLL.
dnl
AC_DEFUN([GLIBCXX_CHECK_POLL], [
AC_CACHE_VAL(glibcxx_cv_POLL, [
AC_TRY_LINK(
[#include <poll.h>],
[struct pollfd pfd[1];
pfd[0].events = POLLIN;
poll(pfd, 1, 0);],
[glibcxx_cv_POLL=yes],
[glibcxx_cv_POLL=no])
])
if test $glibcxx_cv_POLL = yes; then
AC_DEFINE(HAVE_POLL)
fi
])
dnl
dnl Check whether writev is available in <sys/uio.h>, and define HAVE_WRITEV.
dnl
AC_DEFUN([GLIBCXX_CHECK_WRITEV], [
AC_CACHE_VAL(glibcxx_cv_WRITEV, [
AC_TRY_LINK(
[#include <sys/uio.h>],
[struct iovec iov[2];
writev(0, iov, 0);],
[glibcxx_cv_WRITEV=yes],
[glibcxx_cv_WRITEV=no])
])
if test $glibcxx_cv_WRITEV = yes; then
AC_DEFINE(HAVE_WRITEV)
fi
])
dnl
dnl Check whether int64_t is available in <stdint.h>, and define HAVE_INT64_T.
dnl
AC_DEFUN([GLIBCXX_CHECK_INT64_T], [
AC_CACHE_VAL(glibcxx_cv_INT64_T, [
AC_TRY_COMPILE(
[#include <stdint.h>],
[int64_t var;],
[glibcxx_cv_INT64_T=yes],
[glibcxx_cv_INT64_T=no])
])
if test $glibcxx_cv_INT64_T = yes; then
AC_DEFINE(HAVE_INT64_T)
fi
])
dnl
dnl Check whether LFS support is available.
dnl
AC_DEFUN([GLIBCXX_CHECK_LFS], [
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-exceptions"
AC_CACHE_VAL(glibcxx_cv_LFS, [
AC_TRY_LINK(
[#include <unistd.h>
#include <stdio.h>
#include <sys/stat.h>
],
[FILE* fp;
fopen64("t", "w");
fseeko64(fp, 0, SEEK_CUR);
ftello64(fp);
lseek64(1, 0, SEEK_CUR);
struct stat64 buf;
fstat64(1, &buf);],
[glibcxx_cv_LFS=yes],
[glibcxx_cv_LFS=no])
])
if test $glibcxx_cv_LFS = yes; then
AC_DEFINE(_GLIBCXX_USE_LFS)
fi
CXXFLAGS="$ac_save_CXXFLAGS"
AC_LANG_RESTORE
])
dnl
dnl Check for whether a fully dynamic basic_string implementation should
dnl be turned on, that does not put empty objects in per-process static
dnl memory (mostly useful together with shared memory allocators, see PR
dnl libstdc++/16612 for details).
dnl
dnl --enable-fully-dynamic-string defines _GLIBCXX_FULLY_DYNAMIC_STRING
dnl --disable-fully-dynamic-string leaves _GLIBCXX_FULLY_DYNAMIC_STRING undefined
dnl + Usage: GLIBCXX_ENABLE_FULLY_DYNAMIC_STRING[(DEFAULT)]
dnl Where DEFAULT is either `yes' or `no'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_FULLY_DYNAMIC_STRING], [
GLIBCXX_ENABLE(fully-dynamic-string,$1,,[do not put empty strings in per-process static memory])
if test $enable_fully_dynamic_string = yes; then
AC_DEFINE(_GLIBCXX_FULLY_DYNAMIC_STRING)
fi
])
dnl
dnl Does any necessary configuration of the testsuite directory. Generates
dnl the testsuite_hooks.h header.
dnl
dnl GLIBCXX_ENABLE_SYMVERS and GLIBCXX_IS_NATIVE must be done before this.
dnl
dnl Sets:
dnl enable_abi_check / GLIBCXX_TEST_ABI
dnl GLIBCXX_TEST_WCHAR_T
dnl GLIBCXX_TEST_THREAD
dnl Substs:
dnl baseline_dir
dnl
AC_DEFUN([GLIBCXX_CONFIGURE_TESTSUITE], [
if $GLIBCXX_IS_NATIVE && test $is_hosted = yes; then
# Do checks for resource limit functions.
GLIBCXX_CHECK_SETRLIMIT
# Look for setenv, so that extended locale tests can be performed.
GLIBCXX_CHECK_STDLIB_DECL_AND_LINKAGE_3(setenv)
if test $enable_symvers = no; then
enable_abi_check=no
else
case "$host" in
*-*-cygwin*)
enable_abi_check=no ;;
*)
enable_abi_check=yes ;;
esac
fi
else
# Only build this as native, since automake does not understand
# CXX_FOR_BUILD.
enable_abi_check=no
fi
# Export file names for ABI checking.
baseline_dir="$glibcxx_srcdir/config/abi/${abi_baseline_pair}\$(MULTISUBDIR)"
AC_SUBST(baseline_dir)
GLIBCXX_CONDITIONAL(GLIBCXX_TEST_WCHAR_T, test $enable_wchar_t = yes)
GLIBCXX_CONDITIONAL(GLIBCXX_TEST_THREAD, test $enable_thread = yes)
GLIBCXX_CONDITIONAL(GLIBCXX_TEST_ABI, test $enable_abi_check = yes)
])
dnl
dnl Set up *_INCLUDES variables for all sundry Makefile.am's.
dnl
dnl Substs:
dnl GLIBCXX_INCLUDES
dnl TOPLEVEL_INCLUDES
dnl
AC_DEFUN([GLIBCXX_EXPORT_INCLUDES], [
# Used for every C++ compile we perform.
GLIBCXX_INCLUDES="\
-I$glibcxx_builddir/include/$host_alias \
-I$glibcxx_builddir/include \
-I$glibcxx_srcdir/libsupc++"
# For Canadian crosses, pick this up too.
if test $CANADIAN = yes; then
GLIBCXX_INCLUDES="$GLIBCXX_INCLUDES -I\${includedir}"
fi
# Stuff in the actual top level. Currently only used by libsupc++ to
# get unwind* headers from the gcc dir.
#TOPLEVEL_INCLUDES='-I$(toplevel_srcdir)/gcc -I$(toplevel_srcdir)/include'
TOPLEVEL_INCLUDES='-I$(toplevel_srcdir)/gcc'
# Now, export this to all the little Makefiles....
AC_SUBST(GLIBCXX_INCLUDES)
AC_SUBST(TOPLEVEL_INCLUDES)
])
dnl
dnl Set up *_FLAGS and *FLAGS variables for all sundry Makefile.am's.
dnl (SECTION_FLAGS is done under CHECK_COMPILER_FEATURES.)
dnl
dnl Substs:
dnl OPTIMIZE_CXXFLAGS
dnl WARN_FLAGS
dnl
AC_DEFUN([GLIBCXX_EXPORT_FLAGS], [
# Optimization flags that are probably a good idea for thrill-seekers. Just
# uncomment the lines below and make, everything else is ready to go...
# OPTIMIZE_CXXFLAGS = -O3 -fstrict-aliasing -fvtable-gc
OPTIMIZE_CXXFLAGS=
AC_SUBST(OPTIMIZE_CXXFLAGS)
WARN_FLAGS='-Wall -Wextra -Wwrite-strings -Wcast-qual'
AC_SUBST(WARN_FLAGS)
])
dnl
dnl All installation directory information is determined here.
dnl
dnl Substs:
dnl gxx_install_dir
dnl glibcxx_prefixdir
dnl glibcxx_toolexecdir
dnl glibcxx_toolexeclibdir
dnl
dnl Assumes cross_compiling bits already done, and with_cross_host in
dnl particular.
dnl
AC_DEFUN([GLIBCXX_EXPORT_INSTALL_INFO], [
glibcxx_toolexecdir=no
glibcxx_toolexeclibdir=no
glibcxx_prefixdir=$prefix
AC_MSG_CHECKING([for gxx-include-dir])
AC_ARG_WITH([gxx-include-dir],
AC_HELP_STRING([--with-gxx-include-dir=DIR],
[installation directory for include files]),
[case "$withval" in
yes) AC_MSG_ERROR([Missing directory for --with-gxx-include-dir]) ;;
no) gxx_include_dir=no ;;
*) gxx_include_dir=$withval ;;
esac],
[gxx_include_dir=no])
AC_MSG_RESULT($gxx_include_dir)
AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
AC_ARG_ENABLE([version-specific-runtime-libs],
AC_HELP_STRING([--enable-version-specific-runtime-libs],
[Specify that runtime libraries should be installed in a compiler-specific directory]),
[case "$enableval" in
yes) version_specific_libs=yes ;;
no) version_specific_libs=no ;;
*) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
esac],
[version_specific_libs=no])
AC_MSG_RESULT($version_specific_libs)
# Default case for install directory for include files.
if test $version_specific_libs = no && test $gxx_include_dir = no; then
gxx_include_dir='${prefix}'/include/c++/${gcc_version}
fi
# Version-specific runtime libs processing.
if test $version_specific_libs = yes; then
# Need the gcc compiler version to know where to install libraries
# and header files if --enable-version-specific-runtime-libs option
# is selected. FIXME: these variables are misnamed, there are
# no executables installed in _toolexecdir or _toolexeclibdir.
if test x"$gxx_include_dir" = x"no"; then
gxx_include_dir='${libdir}/gcc/${host_alias}/'$gcc_version/include/c++
fi
glibcxx_toolexecdir='${libdir}/gcc/${host_alias}'
glibcxx_toolexeclibdir='${toolexecdir}/'$gcc_version'$(MULTISUBDIR)'
fi
# Calculate glibcxx_toolexecdir, glibcxx_toolexeclibdir
# Install a library built with a cross compiler in tooldir, not libdir.
if test x"$glibcxx_toolexecdir" = x"no"; then
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
glibcxx_toolexecdir='${exec_prefix}/${host_alias}'
glibcxx_toolexeclibdir='${toolexecdir}/lib'
else
glibcxx_toolexecdir='${libdir}/gcc/${host_alias}'
glibcxx_toolexeclibdir='${libdir}'
fi
multi_os_directory=`$CXX -print-multi-os-directory`
case $multi_os_directory in
.) ;; # Avoid trailing /.
*) glibcxx_toolexeclibdir=$glibcxx_toolexeclibdir/$multi_os_directory ;;
esac
fi
AC_MSG_CHECKING([for install location])
AC_MSG_RESULT($gxx_include_dir)
AC_SUBST(glibcxx_prefixdir)
AC_SUBST(gxx_include_dir)
AC_SUBST(glibcxx_toolexecdir)
AC_SUBST(glibcxx_toolexeclibdir)
])
dnl
dnl GLIBCXX_ENABLE
dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING)
dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING, permit a|b|c)
dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING, SHELL-CODE-HANDLER)
dnl
dnl See docs/html/17_intro/configury.html#enable for documentation.
dnl
m4_define([GLIBCXX_ENABLE],[dnl
m4_define([_g_switch],[--enable-$1])dnl
m4_define([_g_help],[AC_HELP_STRING(_g_switch$3,[$4 @<:@default=$2@:>@])])dnl
AC_ARG_ENABLE($1,_g_help,
m4_bmatch([$5],
[^permit ],
[[
case "$enableval" in
m4_bpatsubst([$5],[permit ])) ;;
*) AC_MSG_ERROR(Unknown argument to enable/disable $1) ;;
dnl Idea for future: generate a URL pointing to
dnl "onlinedocs/configopts.html#whatever"
esac
]],
[^$],
[[
case "$enableval" in
yes|no) ;;
*) AC_MSG_ERROR(Argument to enable/disable $1 must be yes or no) ;;
esac
]],
[[$5]]),
[enable_]m4_bpatsubst([$1],-,_)[=][$2])
m4_undefine([_g_switch])dnl
m4_undefine([_g_help])dnl
])
dnl
dnl Check for ISO/IEC 9899:1999 "C99" support.
dnl
dnl --enable-c99 defines _GLIBCXX_USE_C99
dnl --disable-c99 leaves _GLIBCXX_USE_C99 undefined
dnl + Usage: GLIBCXX_ENABLE_C99[(DEFAULT)]
dnl Where DEFAULT is either `yes' or `no'.
dnl + If 'C99' stuff is not available, ignores DEFAULT and sets `no'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_C99], [
GLIBCXX_ENABLE(c99,$1,,[turns on ISO/IEC 9899:1999 support])
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
# Check for the existence of <math.h> functions used if C99 is enabled.
ac_c99_math=yes;
AC_MSG_CHECKING([for ISO C99 support in <math.h>])
AC_TRY_COMPILE([#include <math.h>],[fpclassify(0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[isfinite(0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[isinf(0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[isnan(0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[isnormal(0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[signbit(0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[isgreater(0.0,0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],
[isgreaterequal(0.0,0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[isless(0.0,0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],[islessequal(0.0,0.0);],,[ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],
[islessgreater(0.0,0.0);],, [ac_c99_math=no])
AC_TRY_COMPILE([#include <math.h>],
[isunordered(0.0,0.0);],, [ac_c99_math=no])
AC_MSG_RESULT($ac_c99_math)
if test x"$ac_c99_math" = x"yes"; then
AC_DEFINE(_GLIBCXX_USE_C99_MATH)
fi
# Check for the existence in <stdio.h> of vscanf, et. al.
ac_c99_stdio=yes;
AC_MSG_CHECKING([for ISO C99 support in <stdio.h>])
AC_TRY_COMPILE([#include <stdio.h>],
[snprintf("12", 0, "%i");],, [ac_c99_stdio=no])
AC_TRY_COMPILE([#include <stdio.h>
#include <stdarg.h>
void foo(char* fmt, ...)
{va_list args; va_start(args, fmt);
vfscanf(stderr, "%i", args);}],
[],, [ac_c99_stdio=no])
AC_TRY_COMPILE([#include <stdio.h>
#include <stdarg.h>
void foo(char* fmt, ...)
{va_list args; va_start(args, fmt);
vscanf("%i", args);}],
[],, [ac_c99_stdio=no])
AC_TRY_COMPILE([#include <stdio.h>
#include <stdarg.h>
void foo(char* fmt, ...)
{va_list args; va_start(args, fmt);
vsnprintf(fmt, 0, "%i", args);}],
[],, [ac_c99_stdio=no])
AC_TRY_COMPILE([#include <stdio.h>
#include <stdarg.h>
void foo(char* fmt, ...)
{va_list args; va_start(args, fmt);
vsscanf(fmt, "%i", args);}],
[],, [ac_c99_stdio=no])
AC_MSG_RESULT($ac_c99_stdio)
# Check for the existence in <stdlib.h> of lldiv_t, et. al.
ac_c99_stdlib=yes;
AC_MSG_CHECKING([for lldiv_t declaration])
AC_CACHE_VAL(ac_c99_lldiv_t, [
AC_TRY_COMPILE([#include <stdlib.h>],
[ lldiv_t mydivt;],
[ac_c99_lldiv_t=yes], [ac_c99_lldiv_t=no])
])
AC_MSG_RESULT($ac_c99_lldiv_t)
AC_MSG_CHECKING([for ISO C99 support in <stdlib.h>])
AC_TRY_COMPILE([#include <stdlib.h>],
[char* tmp; strtof("gnu", &tmp);],, [ac_c99_stdlib=no])
AC_TRY_COMPILE([#include <stdlib.h>],
[char* tmp; strtold("gnu", &tmp);],, [ac_c99_stdlib=no])
AC_TRY_COMPILE([#include <stdlib.h>], [llabs(10);],, [ac_c99_stdlib=no])
AC_TRY_COMPILE([#include <stdlib.h>], [lldiv(10,1);],, [ac_c99_stdlib=no])
AC_TRY_COMPILE([#include <stdlib.h>], [atoll("10");],, [ac_c99_stdlib=no])
AC_TRY_COMPILE([#include <stdlib.h>], [_Exit(0);],, [ac_c99_stdlib=no])
if test x"$ac_c99_lldiv_t" = x"no"; then
ac_c99_stdlib=no;
fi;
AC_MSG_RESULT($ac_c99_stdlib)
# Check for the existence of <wchar.h> functions used if C99 is enabled.
# XXX the wchar.h checks should be rolled into the general C99 bits.
ac_c99_wchar=yes;
AC_MSG_CHECKING([for additional ISO C99 support in <wchar.h>])
AC_TRY_COMPILE([#include <wchar.h>],
[wcstold(L"10.0", NULL);],, [ac_c99_wchar=no])
AC_TRY_COMPILE([#include <wchar.h>],
[wcstoll(L"10", NULL, 10);],, [ac_c99_wchar=no])
AC_TRY_COMPILE([#include <wchar.h>],
[wcstoull(L"10", NULL, 10);],, [ac_c99_wchar=no])
AC_MSG_RESULT($ac_c99_wchar)
AC_MSG_CHECKING([for enabled ISO C99 support])
if test x"$ac_c99_math" = x"no" ||
test x"$ac_c99_stdio" = x"no" ||
test x"$ac_c99_stdlib" = x"no" ||
test x"$ac_c99_wchar" = x"no"; then
enable_c99=no;
fi;
AC_MSG_RESULT($enable_c99)
if test x"$ac_99_math" = x"yes"; then
AC_DEFINE(_GLIBCXX_USE_C99_MATH)
fi
# Option parsed, now set things appropriately
if test x"$enable_c99" = x"yes"; then
AC_DEFINE(_GLIBCXX_USE_C99)
fi
AC_LANG_RESTORE
])
dnl
dnl Check for what type of C headers to use.
dnl
dnl --enable-cheaders= [does stuff].
dnl --disable-cheaders [does not do anything, really].
dnl + Usage: GLIBCXX_ENABLE_CHEADERS[(DEFAULT)]
dnl Where DEFAULT is either `c' or `c_std'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_CHEADERS], [
GLIBCXX_ENABLE(cheaders,$1,[=KIND],
[construct "C" headers for g++], [permit c|c_std])
AC_MSG_NOTICE("C" header strategy set to $enable_cheaders)
C_INCLUDE_DIR='${glibcxx_srcdir}/include/'$enable_cheaders
AC_SUBST(C_INCLUDE_DIR)
GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C, test $enable_cheaders = c)
GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C_STD, test $enable_cheaders = c_std)
GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_COMPATIBILITY, test $c_compatibility = yes)
])
dnl
dnl Check for which locale library to use. The choice is mapped to
dnl a subdirectory of config/locale.
dnl
dnl Default is generic.
dnl
AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [
AC_MSG_CHECKING([for C locale to use])
GLIBCXX_ENABLE(clocale,auto,[@<:@=MODEL@:>@],
[use MODEL for target locale package],
[permit generic|gnu|ieee_1003.1-2001|yes|no|auto])
# If they didn't use this option switch, or if they specified --enable
# with no specific model, we'll have to look for one. If they
# specified --disable (???), do likewise.
if test $enable_clocale = no || test $enable_clocale = yes; then
enable_clocale=auto
fi
# Either a known package, or "auto"
enable_clocale_flag=$enable_clocale
# Probe for locale support if no specific model is specified.
# Default to "generic".
if test $enable_clocale_flag = auto; then
case ${target_os} in
linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu)
AC_EGREP_CPP([_GLIBCXX_ok], [
#include <features.h>
#if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)
_GLIBCXX_ok
#endif
], enable_clocale_flag=gnu, enable_clocale_flag=generic)
# Test for bugs early in glibc-2.2.x series
if test $enable_clocale_flag = gnu; then
AC_TRY_RUN([
#define _GNU_SOURCE 1
#include <locale.h>
#include <string.h>
#if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ > 2)
extern __typeof(newlocale) __newlocale;
extern __typeof(duplocale) __duplocale;
extern __typeof(strcoll_l) __strcoll_l;
#endif
int main()
{
const char __one[] = "<22>uglein Augmen";
const char __two[] = "<22>uglein";
int i;
int j;
__locale_t loc;
__locale_t loc_dup;
loc = __newlocale(1 << LC_ALL, "de_DE", 0);
loc_dup = __duplocale(loc);
i = __strcoll_l(__one, __two, loc);
j = __strcoll_l(__one, __two, loc_dup);
return 0;
}
],
[enable_clocale_flag=gnu],[enable_clocale_flag=generic],
[enable_clocale_flag=generic])
fi
# ... at some point put __strxfrm_l tests in as well.
;;
darwin*)
enable_clocale_flag=darwin
;;
*)
enable_clocale_flag=generic
;;
esac
fi
# Deal with gettext issues. Default to not using it (=no) until we detect
# support for it later. Let the user turn it off via --e/d, but let that
# default to on for easier handling.
USE_NLS=no
AC_ARG_ENABLE(nls,
AC_HELP_STRING([--enable-nls],[use Native Language Support (default)]),
[],
[enable_nls=yes])
# Set configure bits for specified locale package
case ${enable_clocale_flag} in
generic)
AC_MSG_RESULT(generic)
CLOCALE_H=config/locale/generic/c_locale.h
CLOCALE_CC=config/locale/generic/c_locale.cc
CCODECVT_H=config/locale/generic/codecvt_specializations.h
CCODECVT_CC=config/locale/generic/codecvt_members.cc
CCOLLATE_CC=config/locale/generic/collate_members.cc
CCTYPE_CC=config/locale/generic/ctype_members.cc
CMESSAGES_H=config/locale/generic/messages_members.h
CMESSAGES_CC=config/locale/generic/messages_members.cc
CMONEY_CC=config/locale/generic/monetary_members.cc
CNUMERIC_CC=config/locale/generic/numeric_members.cc
CTIME_H=config/locale/generic/time_members.h
CTIME_CC=config/locale/generic/time_members.cc
CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
;;
darwin)
AC_MSG_RESULT(darwin)
CLOCALE_H=config/locale/generic/c_locale.h
CLOCALE_CC=config/locale/generic/c_locale.cc
CCODECVT_H=config/locale/generic/codecvt_specializations.h
CCODECVT_CC=config/locale/generic/codecvt_members.cc
CCOLLATE_CC=config/locale/generic/collate_members.cc
CCTYPE_CC=config/locale/darwin/ctype_members.cc
CMESSAGES_H=config/locale/generic/messages_members.h
CMESSAGES_CC=config/locale/generic/messages_members.cc
CMONEY_CC=config/locale/generic/monetary_members.cc
CNUMERIC_CC=config/locale/generic/numeric_members.cc
CTIME_H=config/locale/generic/time_members.h
CTIME_CC=config/locale/generic/time_members.cc
CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
;;
gnu)
AC_MSG_RESULT(gnu)
# Declare intention to use gettext, and add support for specific
# languages.
# For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT
ALL_LINGUAS="de fr"
# Don't call AM-GNU-GETTEXT here. Instead, assume glibc.
AC_CHECK_PROG(check_msgfmt, msgfmt, yes, no)
if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then
USE_NLS=yes
fi
# Export the build objects.
for ling in $ALL_LINGUAS; do \
glibcxx_MOFILES="$glibcxx_MOFILES $ling.mo"; \
glibcxx_POFILES="$glibcxx_POFILES $ling.po"; \
done
AC_SUBST(glibcxx_MOFILES)
AC_SUBST(glibcxx_POFILES)
CLOCALE_H=config/locale/gnu/c_locale.h
CLOCALE_CC=config/locale/gnu/c_locale.cc
CCODECVT_H=config/locale/ieee_1003.1-2001/codecvt_specializations.h
CCODECVT_CC=config/locale/gnu/codecvt_members.cc
CCOLLATE_CC=config/locale/gnu/collate_members.cc
CCTYPE_CC=config/locale/gnu/ctype_members.cc
CMESSAGES_H=config/locale/gnu/messages_members.h
CMESSAGES_CC=config/locale/gnu/messages_members.cc
CMONEY_CC=config/locale/gnu/monetary_members.cc
CNUMERIC_CC=config/locale/gnu/numeric_members.cc
CTIME_H=config/locale/gnu/time_members.h
CTIME_CC=config/locale/gnu/time_members.cc
CLOCALE_INTERNAL_H=config/locale/gnu/c++locale_internal.h
;;
ieee_1003.1-2001)
AC_MSG_RESULT(IEEE 1003.1)
CLOCALE_H=config/locale/ieee_1003.1-2001/c_locale.h
CLOCALE_CC=config/locale/ieee_1003.1-2001/c_locale.cc
CCODECVT_H=config/locale/ieee_1003.1-2001/codecvt_specializations.h
CCODECVT_CC=config/locale/generic/codecvt_members.cc
CCOLLATE_CC=config/locale/generic/collate_members.cc
CCTYPE_CC=config/locale/generic/ctype_members.cc
CMESSAGES_H=config/locale/ieee_1003.1-2001/messages_members.h
CMESSAGES_CC=config/locale/ieee_1003.1-2001/messages_members.cc
CMONEY_CC=config/locale/generic/monetary_members.cc
CNUMERIC_CC=config/locale/generic/numeric_members.cc
CTIME_H=config/locale/generic/time_members.h
CTIME_CC=config/locale/generic/time_members.cc
CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
;;
esac
# This is where the testsuite looks for locale catalogs, using the
# -DLOCALEDIR define during testsuite compilation.
glibcxx_localedir=${glibcxx_builddir}/po/share/locale
AC_SUBST(glibcxx_localedir)
# A standalone libintl (e.g., GNU libintl) may be in use.
if test $USE_NLS = yes; then
AC_CHECK_HEADERS([libintl.h], [], USE_NLS=no)
AC_SEARCH_LIBS(gettext, intl, [], USE_NLS=no)
fi
if test $USE_NLS = yes; then
AC_DEFINE(_GLIBCXX_USE_NLS)
fi
AC_SUBST(USE_NLS)
AC_SUBST(CLOCALE_H)
AC_SUBST(CCODECVT_H)
AC_SUBST(CMESSAGES_H)
AC_SUBST(CCODECVT_CC)
AC_SUBST(CCOLLATE_CC)
AC_SUBST(CCTYPE_CC)
AC_SUBST(CMESSAGES_CC)
AC_SUBST(CMONEY_CC)
AC_SUBST(CNUMERIC_CC)
AC_SUBST(CTIME_H)
AC_SUBST(CTIME_CC)
AC_SUBST(CLOCALE_CC)
AC_SUBST(CLOCALE_INTERNAL_H)
])
dnl
dnl Check for which std::allocator base class to use. The choice is
dnl mapped from a subdirectory of include/ext.
dnl
dnl Default is new.
dnl
AC_DEFUN([GLIBCXX_ENABLE_ALLOCATOR], [
AC_MSG_CHECKING([for std::allocator base class to use])
GLIBCXX_ENABLE(libstdcxx-allocator,auto,[=KIND],
[use KIND for target std::allocator base],
[permit new|malloc|mt|bitmap|pool|yes|no|auto])
# If they didn't use this option switch, or if they specified --enable
# with no specific model, we'll have to look for one. If they
# specified --disable (???), do likewise.
if test $enable_libstdcxx_allocator = no ||
test $enable_libstdcxx_allocator = yes;
then
enable_libstdcxx_allocator=auto
fi
# Either a known package, or "auto". Auto implies the default choice
# for a particular platform.
enable_libstdcxx_allocator_flag=$enable_libstdcxx_allocator
# Probe for host-specific support if no specific model is specified.
# Default to "new".
if test $enable_libstdcxx_allocator_flag = auto; then
case ${target_os} in
linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu)
enable_libstdcxx_allocator_flag=mt
;;
*)
enable_libstdcxx_allocator_flag=new
;;
esac
fi
AC_MSG_RESULT($enable_libstdcxx_allocator_flag)
# Set configure bits for specified locale package
case ${enable_libstdcxx_allocator_flag} in
bitmap)
ALLOCATOR_H=config/allocator/bitmap_allocator_base.h
ALLOCATOR_NAME=__gnu_cxx::bitmap_allocator
;;
malloc)
ALLOCATOR_H=config/allocator/malloc_allocator_base.h
ALLOCATOR_NAME=__gnu_cxx::malloc_allocator
;;
mt)
ALLOCATOR_H=config/allocator/mt_allocator_base.h
ALLOCATOR_NAME=__gnu_cxx::__mt_alloc
;;
new)
ALLOCATOR_H=config/allocator/new_allocator_base.h
ALLOCATOR_NAME=__gnu_cxx::new_allocator
;;
pool)
ALLOCATOR_H=config/allocator/pool_allocator_base.h
ALLOCATOR_NAME=__gnu_cxx::__pool_alloc
;;
esac
AC_SUBST(ALLOCATOR_H)
AC_SUBST(ALLOCATOR_NAME)
])
dnl
dnl Check for whether the Boost-derived checks should be turned on.
dnl
dnl --enable-concept-checks turns them on.
dnl --disable-concept-checks leaves them off.
dnl + Usage: GLIBCXX_ENABLE_CONCEPT_CHECKS[(DEFAULT)]
dnl Where DEFAULT is either `yes' or `no'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_CONCEPT_CHECKS], [
GLIBCXX_ENABLE(concept-checks,$1,,[use Boost-derived template checks])
if test $enable_concept_checks = yes; then
AC_DEFINE(_GLIBCXX_CONCEPT_CHECKS)
fi
])
dnl
dnl Check for which I/O library to use: stdio, or something specific.
dnl
dnl Default is stdio.
dnl
AC_DEFUN([GLIBCXX_ENABLE_CSTDIO], [
AC_MSG_CHECKING([for underlying I/O to use])
GLIBCXX_ENABLE(cstdio,stdio,[=PACKAGE],
[use target-specific I/O package], [permit stdio])
# Now that libio has been removed, you can have any color you want as long
# as it's black. This is one big no-op until other packages are added, but
# showing the framework never hurts.
case ${enable_cstdio} in
stdio)
CSTDIO_H=config/io/c_io_stdio.h
BASIC_FILE_H=config/io/basic_file_stdio.h
BASIC_FILE_CC=config/io/basic_file_stdio.cc
AC_MSG_RESULT(stdio)
;;
esac
AC_SUBST(CSTDIO_H)
AC_SUBST(BASIC_FILE_H)
AC_SUBST(BASIC_FILE_CC)
])
dnl
dnl Check for "unusual" flags to pass to the compiler while building.
dnl
dnl --enable-cxx-flags='-foo -bar -baz' is a general method for passing
dnl experimental flags such as -fpch, -fIMI, -Dfloat=char, etc.
dnl --disable-cxx-flags passes nothing.
dnl + See http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00131.html
dnl http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00284.html
dnl http://gcc.gnu.org/ml/libstdc++/2000-q1/msg00035.html
dnl + Usage: GLIBCXX_ENABLE_CXX_FLAGS(default flags)
dnl If "default flags" is an empty string, the effect is the same
dnl as --disable or --enable=no.
dnl
AC_DEFUN([GLIBCXX_ENABLE_CXX_FLAGS], [dnl
AC_MSG_CHECKING([for extra compiler flags for building])
GLIBCXX_ENABLE(cxx-flags,$1,[=FLAGS],
[pass compiler FLAGS when building library],
[case "x$enable_cxx_flags" in
xno | x) enable_cxx_flags= ;;
x-*) ;;
*) AC_MSG_ERROR(_g_switch needs compiler flags as arguments) ;;
esac])
# Run through flags (either default or command-line) and set anything
# extra (e.g., #defines) that must accompany particular g++ options.
if test -n "$enable_cxx_flags"; then
for f in $enable_cxx_flags; do
case "$f" in
-fhonor-std) ;;
-*) ;;
*) # and we're trying to pass /what/ exactly?
AC_MSG_ERROR([compiler flags start with a -]) ;;
esac
done
fi
EXTRA_CXX_FLAGS="$enable_cxx_flags"
AC_MSG_RESULT($EXTRA_CXX_FLAGS)
AC_SUBST(EXTRA_CXX_FLAGS)
])
dnl
dnl Check for wide character support. Has the same effect as the option
dnl in gcc's configure, but in a form that autoconf can mess with.
dnl
dnl --enable-c-mbchar requests all the wchar_t stuff.
dnl --disable-c-mbchar doesn't.
dnl + Usage: GLIBCXX_ENABLE_C_MBCHAR[(DEFAULT)]
dnl Where DEFAULT is either `yes' or `no'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_C_MBCHAR], [
GLIBCXX_ENABLE(c-mbchar,$1,,[enable multibyte (wide) characters])
# Option parsed, now other scripts can test enable_c_mbchar for yes/no.
])
dnl
dnl Check to see if debugging libraries are to be built.
dnl
dnl --enable-libstdcxx-debug
dnl builds a separate set of debugging libraries in addition to the
dnl normal (shared, static) libstdc++ binaries.
dnl
dnl --disable-libstdcxx-debug
dnl builds only one (non-debug) version of libstdc++.
dnl
dnl --enable-libstdcxx-debug-flags=FLAGS
dnl iff --enable-debug == yes, then use FLAGS to build the debug library.
dnl
dnl + Usage: GLIBCXX_ENABLE_DEBUG[(DEFAULT)]
dnl Where DEFAULT is either `yes' or `no'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_DEBUG], [
AC_MSG_CHECKING([for additional debug build])
GLIBCXX_ENABLE(libstdcxx-debug,$1,,[build extra debug library])
AC_MSG_RESULT($enable_libstdcxx_debug)
GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_DEBUG, test $enable_libstdcxx_debug = yes)
])
dnl
dnl Check for explicit debug flags.
dnl
dnl --enable-libstdcxx-debug-flags='-O1'
dnl is a general method for passing flags to be used when
dnl building debug libraries with --enable-debug.
dnl
dnl --disable-libstdcxx-debug-flags does nothing.
dnl + Usage: GLIBCXX_ENABLE_DEBUG_FLAGS(default flags)
dnl If "default flags" is an empty string, the effect is the same
dnl as --disable or --enable=no.
dnl
AC_DEFUN([GLIBCXX_ENABLE_DEBUG_FLAGS], [
GLIBCXX_ENABLE(libstdcxx-debug-flags,[$1],[=FLAGS],
[pass compiler FLAGS when building debug library],
[case "x$enable_libstdcxx_debug_flags" in
xno | x) enable_libstdcxx_debug_flags= ;;
x-*) ;;
*) AC_MSG_ERROR(_g_switch needs compiler flags as arguments) ;;
esac])
# Option parsed, now set things appropriately
DEBUG_FLAGS="$enable_libstdcxx_debug_flags"
AC_SUBST(DEBUG_FLAGS)
AC_MSG_NOTICE([Debug build flags set to $DEBUG_FLAGS])
])
dnl
dnl Check if the user only wants a freestanding library implementation.
dnl
dnl --disable-hosted-libstdcxx will turn off most of the library build,
dnl installing only the headers required by [17.4.1.3] and the language
dnl support library. More than that will be built (to keep the Makefiles
dnl conveniently clean), but not installed.
dnl
dnl Sets:
dnl is_hosted (yes/no)
dnl
dnl Defines:
dnl _GLIBCXX_HOSTED (always defined, either to 1 or 0)
dnl
AC_DEFUN([GLIBCXX_ENABLE_HOSTED], [
AC_ARG_ENABLE([hosted-libstdcxx],
AC_HELP_STRING([--disable-hosted-libstdcxx],
[only build freestanding C++ runtime support]),,
[case "$host" in
arm*-*-symbianelf*)
enable_hosted_libstdcxx=no
;;
*)
enable_hosted_libstdcxx=yes
;;
esac])
if test "$enable_hosted_libstdcxx" = no; then
AC_MSG_NOTICE([Only freestanding libraries will be built])
is_hosted=no
hosted_define=0
enable_abi_check=no
enable_libstdcxx_pch=no
else
is_hosted=yes
hosted_define=1
fi
GLIBCXX_CONDITIONAL(GLIBCXX_HOSTED, test $is_hosted = yes)
AC_DEFINE_UNQUOTED(_GLIBCXX_HOSTED, $hosted_define,
[Define to 1 if a full hosted library is built, or 0 if freestanding.])
])
dnl
dnl Check for template specializations for the 'long long' type extension.
dnl The result determines only whether 'long long' I/O is enabled; things
dnl like numeric_limits<> specializations are always available.
dnl
dnl --enable-long-long defines _GLIBCXX_USE_LONG_LONG
dnl --disable-long-long leaves _GLIBCXX_USE_LONG_LONG undefined
dnl + Usage: GLIBCXX_ENABLE_LONG_LONG[(DEFAULT)]
dnl Where DEFAULT is either `yes' or `no'.
dnl
AC_DEFUN([GLIBCXX_ENABLE_LONG_LONG], [
GLIBCXX_ENABLE(long-long,$1,,[enables I/O support for 'long long'])
if test $enable_long_long = yes; then
AC_DEFINE(_GLIBCXX_USE_LONG_LONG)
fi
])
dnl
dnl Check to see if building and using a C++ precompiled header can be done.
dnl
dnl --enable-libstdcxx-pch=yes
dnl default, this shows intent to use stdc++.h.gch If it looks like it
dnl may work, after some light-hearted attempts to puzzle out compiler
dnl support, flip bits on in include/Makefile.am
dnl
dnl --disable-libstdcxx-pch
dnl turns off attempts to use or build stdc++.h.gch.
dnl
dnl Substs:
dnl glibcxx_PCHFLAGS
dnl
AC_DEFUN([GLIBCXX_ENABLE_PCH], [
AC_MSG_CHECKING([for enabled PCH])
GLIBCXX_ENABLE(libstdcxx-pch,$1,,[build pre-compiled libstdc++ headers])
AC_MSG_RESULT([$enable_libstdcxx_pch])
if test $enable_libstdcxx_pch = yes; then
AC_CACHE_CHECK([for compiler with PCH support],
[glibcxx_cv_prog_CXX_pch],
[ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated"
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
echo '#include <math.h>' > conftest.h
if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \
-o conftest.h.gch 1>&5 2>&1 &&
echo '#error "pch failed"' > conftest.h &&
echo '#include "conftest.h"' > conftest.cc &&
$CXX -c $CXXFLAGS $CPPFLAGS conftest.cc 1>&5 2>&1 ;
then
glibcxx_cv_prog_CXX_pch=yes
else
glibcxx_cv_prog_CXX_pch=no
fi
rm -f conftest*
CXXFLAGS=$ac_save_CXXFLAGS
AC_LANG_RESTORE
])
enable_libstdcxx_pch=$glibcxx_cv_prog_CXX_pch
fi
GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_PCH, test $enable_libstdcxx_pch = yes)
if test $enable_libstdcxx_pch = yes; then
glibcxx_PCHFLAGS="-include bits/stdc++.h"
else
glibcxx_PCHFLAGS=""
fi
AC_SUBST(glibcxx_PCHFLAGS)
])
dnl
dnl Check for exception handling support. If an explicit enable/disable
dnl sjlj exceptions is given, we don't have to detect. Otherwise the
dnl target may or may not support call frame exceptions.
dnl
dnl --enable-sjlj-exceptions forces the use of builtin setjmp.
dnl --disable-sjlj-exceptions forces the use of call frame unwinding.
dnl Neither one forces an attempt at detection.
dnl
dnl Defines:
dnl _GLIBCXX_SJLJ_EXCEPTIONS if the compiler is configured for it
dnl
AC_DEFUN([GLIBCXX_ENABLE_SJLJ_EXCEPTIONS], [
AC_MSG_CHECKING([for exception model to use])
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
GLIBCXX_ENABLE(sjlj-exceptions,auto,,
[force use of builtin_setjmp for exceptions],
[permit yes|no|auto])
if test $enable_sjlj_exceptions = auto; then
# Botheration. Now we've got to detect the exception model. Link tests
# against libgcc.a are problematic since we've not been given proper -L
# bits for single-tree newlib and libgloss.
#
# Fake what AC_TRY_COMPILE does. XXX Look at redoing this new-style.
cat > conftest.$ac_ext << EOF
[#]line __oline__ "configure"
struct S { ~S(); };
void bar();
void foo()
{
S s;
bar();
}
EOF
old_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=-S
if AC_TRY_EVAL(ac_compile); then
if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then
enable_sjlj_exceptions=yes
elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then
enable_sjlj_exceptions=no
fi
fi
CXXFLAGS="$old_CXXFLAGS"
rm -f conftest*
fi
# This is a tad weird, for hysterical raisins. We have to map enable/disable
# to two different models.
case $enable_sjlj_exceptions in
yes)
AC_DEFINE(_GLIBCXX_SJLJ_EXCEPTIONS, 1,
[Define if the compiler is configured for setjmp/longjmp exceptions.])
ac_exception_model_name=sjlj
;;
no)
ac_exception_model_name="call frame"
;;
*)
AC_MSG_ERROR([unable to detect exception model])
;;
esac
AC_LANG_RESTORE
AC_MSG_RESULT($ac_exception_model_name)
])
dnl
dnl Add version tags to symbols in shared library (or not), additionally
dnl marking other symbols as private/local (or not).
dnl
dnl --enable-symvers=style adds a version script to the linker call when
dnl creating the shared library. The choice of version script is
dnl controlled by 'style'.
dnl --disable-symvers does not.
dnl + Usage: GLIBCXX_ENABLE_SYMVERS[(DEFAULT)]
dnl Where DEFAULT is either 'yes' or 'no'. Passing `yes' tries to
dnl choose a default style based on linker characteristics. Passing
dnl 'no' disables versioning.
dnl
AC_DEFUN([GLIBCXX_ENABLE_SYMVERS], [
GLIBCXX_ENABLE(symvers,$1,[=STYLE],
[enables symbol versioning of the shared library],
[permit yes|no|gnu])
# If we never went through the GLIBCXX_CHECK_LINKER_FEATURES macro, then we
# don't know enough about $LD to do tricks...
AC_REQUIRE([GLIBCXX_CHECK_LINKER_FEATURES])
# FIXME The following test is too strict, in theory.
if test $enable_shared = no ||
test "x$LD" = x ||
test x$glibcxx_gnu_ld_version = x; then
enable_symvers=no
fi
# Check to see if libgcc_s exists, indicating that shared libgcc is possible.
if test $enable_symvers != no; then
AC_MSG_CHECKING([for shared libgcc])
ac_save_CFLAGS="$CFLAGS"
CFLAGS=' -lgcc_s'
AC_TRY_LINK(, [return 0;], glibcxx_shared_libgcc=yes, glibcxx_shared_libgcc=no)
CFLAGS="$ac_save_CFLAGS"
if test $glibcxx_shared_libgcc = no; then
cat > conftest.c <<EOF
int main (void) { return 0; }
EOF
changequote(,)dnl
glibcxx_libgcc_s_suffix=`${CC-cc} $CFLAGS $CPPFLAGS $LDFLAGS \
-shared -shared-libgcc -o conftest.so \
conftest.c -v 2>&1 >/dev/null \
| sed -n 's/^.* -lgcc_s\([^ ]*\) .*$/\1/p'`
changequote([,])dnl
rm -f conftest.c conftest.so
if test x${glibcxx_libgcc_s_suffix+set} = xset; then
CFLAGS=" -lgcc_s$glibcxx_libgcc_s_suffix"
AC_TRY_LINK(, [return 0;], glibcxx_shared_libgcc=yes)
CFLAGS="$ac_save_CFLAGS"
fi
fi
AC_MSG_RESULT($glibcxx_shared_libgcc)
fi
# For GNU ld, we need at least this version. The format is described in
# GLIBCXX_CHECK_LINKER_FEATURES above.
glibcxx_min_gnu_ld_version=21400
# XXXXXXXXXXX glibcxx_gnu_ld_version=21390
# Check to see if unspecified "yes" value can win, given results above.
# Change "yes" into either "no" or a style name.
if test $enable_symvers = yes; then
if test $with_gnu_ld = yes &&
test $glibcxx_shared_libgcc = yes;
then
if test $glibcxx_gnu_ld_version -ge $glibcxx_min_gnu_ld_version ; then
enable_symvers=gnu
else
# The right tools, the right setup, but too old. Fallbacks?
AC_MSG_WARN(=== Linker version $glibcxx_gnu_ld_version is too old for)
AC_MSG_WARN(=== full symbol versioning support in this release of GCC.)
AC_MSG_WARN(=== You would need to upgrade your binutils to version)
AC_MSG_WARN(=== $glibcxx_min_gnu_ld_version or later and rebuild GCC.)
if test $glibcxx_gnu_ld_version -ge 21200 ; then
# Globbing fix is present, proper block support is not.
dnl AC_MSG_WARN([=== Dude, you are soooo close. Maybe we can fake it.])
dnl enable_symvers=???
AC_MSG_WARN([=== Symbol versioning will be disabled.])
enable_symvers=no
else
# 2.11 or older.
AC_MSG_WARN([=== Symbol versioning will be disabled.])
enable_symvers=no
fi
fi
else
# just fail for now
AC_MSG_WARN([=== You have requested some kind of symbol versioning, but])
AC_MSG_WARN([=== either you are not using a supported linker, or you are])
AC_MSG_WARN([=== not building a shared libgcc_s (which is required).])
AC_MSG_WARN([=== Symbol versioning will be disabled.])
enable_symvers=no
fi
fi
# Everything parsed; figure out what file to use.
case $enable_symvers in
no)
SYMVER_MAP=config/linker-map.dummy
;;
gnu)
SYMVER_MAP=config/linker-map.gnu
AC_DEFINE(_GLIBCXX_SYMVER)
;;
esac
AC_SUBST(SYMVER_MAP)
AC_SUBST(port_specific_symbol_files)
GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_VERSIONED_SHLIB, test $enable_symvers != no)
AC_MSG_NOTICE(versioning on shared library symbols is $enable_symvers)
])
dnl
dnl Setup to use the gcc gthr.h thread-specific memory and mutex model.
dnl We must stage the required headers so that they will be installed
dnl with the library (unlike libgcc, the STL implementation is provided
dnl solely within headers). Since we must not inject random user-space
dnl macro names into user-provided C++ code, we first stage into <file>-in
dnl and process to <file> with an output command. The reason for a two-
dnl stage process here is to correctly handle $srcdir!=$objdir without
dnl having to write complex code (the sed commands to clean the macro
dnl namespace are complex and fragile enough as it is). We must also
dnl add a relative path so that -I- is supported properly.
dnl
dnl Substs:
dnl glibcxx_thread_h
dnl
dnl Defines:
dnl HAVE_GTHR_DEFAULT
dnl
AC_DEFUN([GLIBCXX_ENABLE_THREADS], [
AC_MSG_CHECKING([for thread model used by GCC])
target_thread_file=`$CXX -v 2>&1 | sed -n 's/^Thread model: //p'`
AC_MSG_RESULT([$target_thread_file])
if test $target_thread_file != single; then
AC_DEFINE(HAVE_GTHR_DEFAULT)
fi
glibcxx_thread_h=gthr-$target_thread_file.h
dnl Check for __GTHREADS define.
gthread_file=${toplevel_srcdir}/gcc/${glibcxx_thread_h}
if grep __GTHREADS $gthread_file >/dev/null 2>&1 ; then
enable_thread=yes
else
enable_thread=no
fi
AC_SUBST(glibcxx_thread_h)
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN([AC_LC_MESSAGES], [
AC_CHECK_HEADER(locale.h, [
AC_CACHE_CHECK([for LC_MESSAGES], ac_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
ac_cv_val_LC_MESSAGES=yes, ac_cv_val_LC_MESSAGES=no)])
if test $ac_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES)
fi
])
])
sinclude([../libtool.m4])
dnl The lines below arrange for aclocal not to bring an installed
dnl libtool.m4 into aclocal.m4, while still arranging for automake to
dnl add a definition of LIBTOOL to Makefile.in.
ifelse(,,,[AC_SUBST(LIBTOOL)
AC_DEFUN([AM_PROG_LIBTOOL])
AC_DEFUN([AC_LIBTOOL_DLOPEN])
AC_DEFUN([AC_PROG_LD])
])
dnl vim:et:ts=2:sw=2