OpenE2K/gcc
2
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
7b3376a0da
gcc/gcc/loop-doloop.c
Kenneth Zadeck 807e902eea Merge in wide-int. 
From-SVN: r210113
2014-05-06 16:25:05 +00:00

753 lines
23 KiB
C
Raw Blame History

/* Perform doloop optimizations
Copyright (C) 2004-2014 Free Software Foundation, Inc.
Based on code by Michael P. Hayes (m.hayes@elec.canterbury.ac.nz)
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "rtl.h"
#include "flags.h"
#include "expr.h"
#include "hard-reg-set.h"
#include "basic-block.h"
#include "diagnostic-core.h"
#include "tm_p.h"
#include "cfgloop.h"
#include "params.h"
#include "target.h"
#include "dumpfile.h"
/* This module is used to modify loops with a determinable number of
iterations to use special low-overhead looping instructions.
It first validates whether the loop is well behaved and has a
determinable number of iterations (either at compile or run-time).
It then modifies the loop to use a low-overhead looping pattern as
follows:
1. A pseudo register is allocated as the loop iteration counter.
2. The number of loop iterations is calculated and is stored
in the loop counter.
3. At the end of the loop, the jump insn is replaced by the
doloop_end pattern. The compare must remain because it might be
used elsewhere. If the loop-variable or condition register are
used elsewhere, they will be eliminated by flow.
4. An optional doloop_begin pattern is inserted at the top of the
loop.
TODO The optimization should only performed when either the biv used for exit
condition is unused at all except for the exit test, or if we do not have to
change its value, since otherwise we have to add a new induction variable,
which usually will not pay up (unless the cost of the doloop pattern is
somehow extremely lower than the cost of compare & jump, or unless the bct
register cannot be used for anything else but doloop -- ??? detect these
cases). */
#ifdef HAVE_doloop_end
/* Return the loop termination condition for PATTERN or zero
if it is not a decrement and branch jump insn. */
rtx
doloop_condition_get (rtx doloop_pat)
{
rtx cmp;
rtx inc;
rtx reg;
rtx inc_src;
rtx condition;
rtx pattern;
rtx cc_reg = NULL_RTX;
rtx reg_orig = NULL_RTX;
/* The canonical doloop pattern we expect has one of the following
forms:
1) (parallel [(set (pc) (if_then_else (condition)
(label_ref (label))
(pc)))
(set (reg) (plus (reg) (const_int -1)))
(additional clobbers and uses)])
The branch must be the first entry of the parallel (also required
by jump.c), and the second entry of the parallel must be a set of
the loop counter register. Some targets (IA-64) wrap the set of
the loop counter in an if_then_else too.
2) (set (reg) (plus (reg) (const_int -1))
(set (pc) (if_then_else (reg != 0)
(label_ref (label))
(pc))).
Some targets (ARM) do the comparison before the branch, as in the
following form:
3) (parallel [(set (cc) (compare ((plus (reg) (const_int -1), 0)))
(set (reg) (plus (reg) (const_int -1)))])
(set (pc) (if_then_else (cc == NE)
(label_ref (label))
(pc))) */
pattern = PATTERN (doloop_pat);
if (GET_CODE (pattern) != PARALLEL)
{
rtx cond;
rtx prev_insn = prev_nondebug_insn (doloop_pat);
rtx cmp_arg1, cmp_arg2;
rtx cmp_orig;
/* In case the pattern is not PARALLEL we expect two forms
of doloop which are cases 2) and 3) above: in case 2) the
decrement immediately precedes the branch, while in case 3)
the compare and decrement instructions immediately precede
the branch. */
if (prev_insn == NULL_RTX || !INSN_P (prev_insn))
return 0;
cmp = pattern;
if (GET_CODE (PATTERN (prev_insn)) == PARALLEL)
{
/* The third case: the compare and decrement instructions
immediately precede the branch. */
cmp_orig = XVECEXP (PATTERN (prev_insn), 0, 0);
if (GET_CODE (cmp_orig) != SET)
return 0;
if (GET_CODE (SET_SRC (cmp_orig)) != COMPARE)
return 0;
cmp_arg1 = XEXP (SET_SRC (cmp_orig), 0);
cmp_arg2 = XEXP (SET_SRC (cmp_orig), 1);
if (cmp_arg2 != const0_rtx
|| GET_CODE (cmp_arg1) != PLUS)
return 0;
reg_orig = XEXP (cmp_arg1, 0);
if (XEXP (cmp_arg1, 1) != GEN_INT (-1)
|| !REG_P (reg_orig))
return 0;
cc_reg = SET_DEST (cmp_orig);
inc = XVECEXP (PATTERN (prev_insn), 0, 1);
}
else
inc = PATTERN (prev_insn);
/* We expect the condition to be of the form (reg != 0) */
cond = XEXP (SET_SRC (cmp), 0);
if (GET_CODE (cond) != NE || XEXP (cond, 1) != const0_rtx)
return 0;
}
else
{
cmp = XVECEXP (pattern, 0, 0);
inc = XVECEXP (pattern, 0, 1);
}
/* Check for (set (reg) (something)). */
if (GET_CODE (inc) != SET)
return 0;
reg = SET_DEST (inc);
if (! REG_P (reg))
return 0;
/* Check if something = (plus (reg) (const_int -1)).
On IA-64, this decrement is wrapped in an if_then_else. */
inc_src = SET_SRC (inc);
if (GET_CODE (inc_src) == IF_THEN_ELSE)
inc_src = XEXP (inc_src, 1);
if (GET_CODE (inc_src) != PLUS
|| XEXP (inc_src, 0) != reg
|| XEXP (inc_src, 1) != constm1_rtx)
return 0;
/* Check for (set (pc) (if_then_else (condition)
(label_ref (label))
(pc))). */
if (GET_CODE (cmp) != SET
|| SET_DEST (cmp) != pc_rtx
|| GET_CODE (SET_SRC (cmp)) != IF_THEN_ELSE
|| GET_CODE (XEXP (SET_SRC (cmp), 1)) != LABEL_REF
|| XEXP (SET_SRC (cmp), 2) != pc_rtx)
return 0;
/* Extract loop termination condition. */
condition = XEXP (SET_SRC (cmp), 0);
/* We expect a GE or NE comparison with 0 or 1. */
if ((GET_CODE (condition) != GE
&& GET_CODE (condition) != NE)
|| (XEXP (condition, 1) != const0_rtx
&& XEXP (condition, 1) != const1_rtx))
return 0;
if ((XEXP (condition, 0) == reg)
/* For the third case: */
|| ((cc_reg != NULL_RTX)
&& (XEXP (condition, 0) == cc_reg)
&& (reg_orig == reg))
|| (GET_CODE (XEXP (condition, 0)) == PLUS
&& XEXP (XEXP (condition, 0), 0) == reg))
{
if (GET_CODE (pattern) != PARALLEL)
/* For the second form we expect:
(set (reg) (plus (reg) (const_int -1))
(set (pc) (if_then_else (reg != 0)
(label_ref (label))
(pc))).
is equivalent to the following:
(parallel [(set (pc) (if_then_else (reg != 1)
(label_ref (label))
(pc)))
(set (reg) (plus (reg) (const_int -1)))
(additional clobbers and uses)])
For the third form we expect:
(parallel [(set (cc) (compare ((plus (reg) (const_int -1)), 0))
(set (reg) (plus (reg) (const_int -1)))])
(set (pc) (if_then_else (cc == NE)
(label_ref (label))
(pc)))
which is equivalent to the following:
(parallel [(set (cc) (compare (reg, 1))
(set (reg) (plus (reg) (const_int -1)))
(set (pc) (if_then_else (NE == cc)
(label_ref (label))
(pc))))])
So we return the second form instead for the two cases.
*/
condition = gen_rtx_fmt_ee (NE, VOIDmode, inc_src, const1_rtx);
return condition;
}
/* ??? If a machine uses a funny comparison, we could return a
canonicalized form here. */
return 0;
}
/* Return nonzero if the loop specified by LOOP is suitable for
the use of special low-overhead looping instructions. DESC
describes the number of iterations of the loop. */
static bool
doloop_valid_p (struct loop *loop, struct niter_desc *desc)
{
basic_block *body = get_loop_body (loop), bb;
rtx insn;
unsigned i;
bool result = true;
/* Check for loops that may not terminate under special conditions. */
if (!desc->simple_p
|| desc->assumptions
|| desc->infinite)
{
/* There are some cases that would require a special attention.
For example if the comparison is LEU and the comparison value
is UINT_MAX then the loop will not terminate. Similarly, if the
comparison code is GEU and the comparison value is 0, the
loop will not terminate.
If the absolute increment is not 1, the loop can be infinite
even with LTU/GTU, e.g. for (i = 3; i > 0; i -= 2)
??? We could compute these conditions at run-time and have a
additional jump around the loop to ensure an infinite loop.
However, it is very unlikely that this is the intended
behavior of the loop and checking for these rare boundary
conditions would pessimize all other code.
If the loop is executed only a few times an extra check to
restart the loop could use up most of the benefits of using a
count register loop. Note however, that normally, this
restart branch would never execute, so it could be predicted
well by the CPU. We should generate the pessimistic code by
default, and have an option, e.g. -funsafe-loops that would
enable count-register loops in this case. */
if (dump_file)
fprintf (dump_file, "Doloop: Possible infinite iteration case.\n");
result = false;
goto cleanup;
}
for (i = 0; i < loop->num_nodes; i++)
{
bb = body[i];
for (insn = BB_HEAD (bb);
insn != NEXT_INSN (BB_END (bb));
insn = NEXT_INSN (insn))
{
/* Different targets have different necessities for low-overhead
looping. Call the back end for each instruction within the loop
to let it decide whether the insn prohibits a low-overhead loop.
It will then return the cause for it to emit to the dump file. */
const char * invalid = targetm.invalid_within_doloop (insn);
if (invalid)
{
if (dump_file)
fprintf (dump_file, "Doloop: %s\n", invalid);
result = false;
goto cleanup;
}
}
}
result = true;
cleanup:
free (body);
return result;
}
/* Adds test of COND jumping to DEST on edge *E and set *E to the new fallthru
edge. If the condition is always false, do not do anything. If it is always
true, redirect E to DEST and return false. In all other cases, true is
returned. */
static bool
add_test (rtx cond, edge *e, basic_block dest)
{
rtx seq, jump, label;
enum machine_mode mode;
rtx op0 = XEXP (cond, 0), op1 = XEXP (cond, 1);
enum rtx_code code = GET_CODE (cond);
basic_block bb;
mode = GET_MODE (XEXP (cond, 0));
if (mode == VOIDmode)
mode = GET_MODE (XEXP (cond, 1));
start_sequence ();
op0 = force_operand (op0, NULL_RTX);
op1 = force_operand (op1, NULL_RTX);
label = block_label (dest);
do_compare_rtx_and_jump (op0, op1, code, 0, mode, NULL_RTX,
NULL_RTX, label, -1);
jump = get_last_insn ();
if (!jump || !JUMP_P (jump))
{
/* The condition is always false and the jump was optimized out. */
end_sequence ();
return true;
}
seq = get_insns ();
end_sequence ();
/* There always is at least the jump insn in the sequence. */
gcc_assert (seq != NULL_RTX);
bb = split_edge_and_insert (*e, seq);
*e = single_succ_edge (bb);
if (any_uncondjump_p (jump))
{
/* The condition is always true. */
delete_insn (jump);
redirect_edge_and_branch_force (*e, dest);
return false;
}
JUMP_LABEL (jump) = label;
/* The jump is supposed to handle an unlikely special case. */
add_int_reg_note (jump, REG_BR_PROB, 0);
LABEL_NUSES (label)++;
make_edge (bb, dest, (*e)->flags & ~EDGE_FALLTHRU);
return true;
}
/* Modify the loop to use the low-overhead looping insn where LOOP
describes the loop, DESC describes the number of iterations of the
loop, and DOLOOP_INSN is the low-overhead looping insn to emit at the
end of the loop. CONDITION is the condition separated from the
DOLOOP_SEQ. COUNT is the number of iterations of the LOOP. */
static void
doloop_modify (struct loop *loop, struct niter_desc *desc,
rtx doloop_seq, rtx condition, rtx count)
{
rtx counter_reg;
rtx tmp, noloop = NULL_RTX;
rtx sequence;
rtx jump_insn;
rtx jump_label;
int nonneg = 0;
bool increment_count;
basic_block loop_end = desc->out_edge->src;
enum machine_mode mode;
rtx true_prob_val;
widest_int iterations;
jump_insn = BB_END (loop_end);
if (dump_file)
{
fprintf (dump_file, "Doloop: Inserting doloop pattern (");
if (desc->const_iter)
fprintf (dump_file, HOST_WIDEST_INT_PRINT_DEC, desc->niter);
else
fputs ("runtime", dump_file);
fputs (" iterations).\n", dump_file);
}
/* Get the probability of the original branch. If it exists we would
need to update REG_BR_PROB of the new jump_insn. */
true_prob_val = find_reg_note (jump_insn, REG_BR_PROB, NULL_RTX);
/* Discard original jump to continue loop. The original compare
result may still be live, so it cannot be discarded explicitly. */
delete_insn (jump_insn);
counter_reg = XEXP (condition, 0);
if (GET_CODE (counter_reg) == PLUS)
counter_reg = XEXP (counter_reg, 0);
mode = GET_MODE (counter_reg);
increment_count = false;
switch (GET_CODE (condition))
{
case NE:
/* Currently only NE tests against zero and one are supported. */
noloop = XEXP (condition, 1);
if (noloop != const0_rtx)
{
gcc_assert (noloop == const1_rtx);
increment_count = true;
}
break;
case GE:
/* Currently only GE tests against zero are supported. */
gcc_assert (XEXP (condition, 1) == const0_rtx);
noloop = constm1_rtx;
/* The iteration count does not need incrementing for a GE test. */
increment_count = false;
/* Determine if the iteration counter will be non-negative.
Note that the maximum value loaded is iterations_max - 1. */
if (get_max_loop_iterations (loop, &iterations)
&& wi::leu_p (iterations,
wi::set_bit_in_zero <widest_int>
(GET_MODE_PRECISION (mode) - 1)))
nonneg = 1;
break;
/* Abort if an invalid doloop pattern has been generated. */
default:
gcc_unreachable ();
}
if (increment_count)
count = simplify_gen_binary (PLUS, mode, count, const1_rtx);
/* Insert initialization of the count register into the loop header. */
start_sequence ();
tmp = force_operand (count, counter_reg);
convert_move (counter_reg, tmp, 1);
sequence = get_insns ();
end_sequence ();
emit_insn_after (sequence, BB_END (loop_preheader_edge (loop)->src));
if (desc->noloop_assumptions)
{
rtx ass = copy_rtx (desc->noloop_assumptions);
basic_block preheader = loop_preheader_edge (loop)->src;
basic_block set_zero
= split_edge (loop_preheader_edge (loop));
basic_block new_preheader
= split_edge (loop_preheader_edge (loop));
edge te;
/* Expand the condition testing the assumptions and if it does not pass,
reset the count register to 0. */
redirect_edge_and_branch_force (single_succ_edge (preheader), new_preheader);
set_immediate_dominator (CDI_DOMINATORS, new_preheader, preheader);
set_zero->count = 0;
set_zero->frequency = 0;
te = single_succ_edge (preheader);
for (; ass; ass = XEXP (ass, 1))
if (!add_test (XEXP (ass, 0), &te, set_zero))
break;
if (ass)
{
/* We reached a condition that is always true. This is very hard to
reproduce (such a loop does not roll, and thus it would most
likely get optimized out by some of the preceding optimizations).
In fact, I do not have any testcase for it. However, it would
also be very hard to show that it is impossible, so we must
handle this case. */
set_zero->count = preheader->count;
set_zero->frequency = preheader->frequency;
}
if (EDGE_COUNT (set_zero->preds) == 0)
{
/* All the conditions were simplified to false, remove the
unreachable set_zero block. */
delete_basic_block (set_zero);
}
else
{
/* Reset the counter to zero in the set_zero block. */
start_sequence ();
convert_move (counter_reg, noloop, 0);
sequence = get_insns ();
end_sequence ();
emit_insn_after (sequence, BB_END (set_zero));
set_immediate_dominator (CDI_DOMINATORS, set_zero,
recompute_dominator (CDI_DOMINATORS,
set_zero));
}
set_immediate_dominator (CDI_DOMINATORS, new_preheader,
recompute_dominator (CDI_DOMINATORS,
new_preheader));
}
/* Some targets (eg, C4x) need to initialize special looping
registers. */
#ifdef HAVE_doloop_begin
{
rtx init;
init = gen_doloop_begin (counter_reg, doloop_seq);
if (init)
{
start_sequence ();
emit_insn (init);
sequence = get_insns ();
end_sequence ();
emit_insn_after (sequence, BB_END (loop_preheader_edge (loop)->src));
}
}
#endif
/* Insert the new low-overhead looping insn. */
emit_jump_insn_after (doloop_seq, BB_END (loop_end));
jump_insn = BB_END (loop_end);
jump_label = block_label (desc->in_edge->dest);
JUMP_LABEL (jump_insn) = jump_label;
LABEL_NUSES (jump_label)++;
/* Ensure the right fallthru edge is marked, for case we have reversed
the condition. */
desc->in_edge->flags &= ~EDGE_FALLTHRU;
desc->out_edge->flags |= EDGE_FALLTHRU;
/* Add a REG_NONNEG note if the actual or estimated maximum number
of iterations is non-negative. */
if (nonneg)
add_reg_note (jump_insn, REG_NONNEG, NULL_RTX);
/* Update the REG_BR_PROB note. */
if (true_prob_val)
{
/* Seems safer to use the branch probability. */
add_int_reg_note (jump_insn, REG_BR_PROB, desc->in_edge->probability);
}
}
/* Process loop described by LOOP validating that the loop is suitable for
conversion to use a low overhead looping instruction, replacing the jump
insn where suitable. Returns true if the loop was successfully
modified. */
static bool
doloop_optimize (struct loop *loop)
{
enum machine_mode mode;
rtx doloop_seq, doloop_pat, doloop_reg;
rtx count;
widest_int iterations, iterations_max;
rtx start_label;
rtx condition;
unsigned level, est_niter;
int max_cost;
struct niter_desc *desc;
unsigned word_mode_size;
unsigned HOST_WIDE_INT word_mode_max;
int entered_at_top;
if (dump_file)
fprintf (dump_file, "Doloop: Processing loop %d.\n", loop->num);
iv_analysis_loop_init (loop);
/* Find the simple exit of a LOOP. */
desc = get_simple_loop_desc (loop);
/* Check that loop is a candidate for a low-overhead looping insn. */
if (!doloop_valid_p (loop, desc))
{
if (dump_file)
fprintf (dump_file,
"Doloop: The loop is not suitable.\n");
return false;
}
mode = desc->mode;
est_niter = 3;
if (desc->const_iter)
est_niter = desc->niter;
/* If the estimate on number of iterations is reliable (comes from profile
feedback), use it. Do not use it normally, since the expected number
of iterations of an unrolled loop is 2. */
if (loop->header->count)
est_niter = expected_loop_iterations (loop);
if (est_niter < 3)
{
if (dump_file)
fprintf (dump_file,
"Doloop: Too few iterations (%u) to be profitable.\n",
est_niter);
return false;
}
max_cost
= COSTS_N_INSNS (PARAM_VALUE (PARAM_MAX_ITERATIONS_COMPUTATION_COST));
if (set_src_cost (desc->niter_expr, optimize_loop_for_speed_p (loop))
> max_cost)
{
if (dump_file)
fprintf (dump_file,
"Doloop: number of iterations too costly to compute.\n");
return false;
}
if (desc->const_iter)
iterations = widest_int::from (std::make_pair (desc->niter_expr, mode),
UNSIGNED);
else
iterations = 0;
if (!get_max_loop_iterations (loop, &iterations_max))
iterations_max = 0;
level = get_loop_level (loop) + 1;
entered_at_top = (loop->latch == desc->in_edge->dest
&& contains_no_active_insn_p (loop->latch));
if (!targetm.can_use_doloop_p (iterations, iterations_max, level,
entered_at_top))
{
if (dump_file)
fprintf (dump_file, "Loop rejected by can_use_doloop_p.\n");
return false;
}
/* Generate looping insn. If the pattern FAILs then give up trying
to modify the loop since there is some aspect the back-end does
not like. */
count = copy_rtx (desc->niter_expr);
start_label = block_label (desc->in_edge->dest);
doloop_reg = gen_reg_rtx (mode);
doloop_seq = gen_doloop_end (doloop_reg, start_label);
word_mode_size = GET_MODE_PRECISION (word_mode);
word_mode_max
= ((unsigned HOST_WIDE_INT) 1 << (word_mode_size - 1) << 1) - 1;
if (! doloop_seq
&& mode != word_mode
/* Before trying mode different from the one in that # of iterations is
computed, we must be sure that the number of iterations fits into
the new mode. */
&& (word_mode_size >= GET_MODE_PRECISION (mode)
|| wi::leu_p (iterations_max, word_mode_max)))
{
if (word_mode_size > GET_MODE_PRECISION (mode))
count = simplify_gen_unary (ZERO_EXTEND, word_mode, count, mode);
else
count = lowpart_subreg (word_mode, count, mode);
PUT_MODE (doloop_reg, word_mode);
doloop_seq = gen_doloop_end (doloop_reg, start_label);
}
if (! doloop_seq)
{
if (dump_file)
fprintf (dump_file,
"Doloop: Target unwilling to use doloop pattern!\n");
return false;
}
/* If multiple instructions were created, the last must be the
jump instruction. Also, a raw define_insn may yield a plain
pattern. */
doloop_pat = doloop_seq;
if (INSN_P (doloop_pat))
{
while (NEXT_INSN (doloop_pat) != NULL_RTX)
doloop_pat = NEXT_INSN (doloop_pat);
if (!JUMP_P (doloop_pat))
doloop_pat = NULL_RTX;
}
if (! doloop_pat
|| ! (condition = doloop_condition_get (doloop_pat)))
{
if (dump_file)
fprintf (dump_file, "Doloop: Unrecognizable doloop pattern!\n");
return false;
}
doloop_modify (loop, desc, doloop_seq, condition, count);
return true;
}
/* This is the main entry point. Process all loops using doloop_optimize. */
void
doloop_optimize_loops (void)
{
struct loop *loop;
FOR_EACH_LOOP (loop, 0)
{
doloop_optimize (loop);
}
iv_analysis_done ();
#ifdef ENABLE_CHECKING
verify_loop_structure ();
#endif
}
#endif /* HAVE_doloop_end */
Reference in New Issue View Git Blame Copy Permalink