gcc/libgcc/config/i386/cygwin.S

188 lines
5.5 KiB
ArmAsm

/* stuff needed for libgcc on win32.
*
* Copyright (C) 1996-2015 Free Software Foundation, Inc.
* Written By Steve Chamberlain
*
* This file is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 3, or (at your option) any
* later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* Under Section 7 of GPL version 3, you are granted additional
* permissions described in the GCC Runtime Library Exception, version
* 3.1, as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License and
* a copy of the GCC Runtime Library Exception along with this program;
* see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "auto-host.h"
#ifdef HAVE_GAS_CFI_SECTIONS_DIRECTIVE
.cfi_sections .debug_frame
# define cfi_startproc() .cfi_startproc
# define cfi_endproc() .cfi_endproc
# define cfi_adjust_cfa_offset(X) .cfi_adjust_cfa_offset X
# define cfi_def_cfa_register(X) .cfi_def_cfa_register X
# define cfi_register(D,S) .cfi_register D, S
# ifdef __x86_64__
# define cfi_push(X) .cfi_adjust_cfa_offset 8; .cfi_rel_offset X, 0
# define cfi_pop(X) .cfi_adjust_cfa_offset -8; .cfi_restore X
# else
# define cfi_push(X) .cfi_adjust_cfa_offset 4; .cfi_rel_offset X, 0
# define cfi_pop(X) .cfi_adjust_cfa_offset -4; .cfi_restore X
# endif
#else
# define cfi_startproc()
# define cfi_endproc()
# define cfi_adjust_cfa_offset(X)
# define cfi_def_cfa_register(X)
# define cfi_register(D,S)
# define cfi_push(X)
# define cfi_pop(X)
#endif /* HAVE_GAS_CFI_SECTIONS_DIRECTIVE */
#ifdef L_chkstk
/* Function prologue calls __chkstk to probe the stack when allocating more
than CHECK_STACK_LIMIT bytes in one go. Touching the stack at 4K
increments is necessary to ensure that the guard pages used
by the OS virtual memory manger are allocated in correct sequence. */
.global ___chkstk
.global __alloca
#ifdef __x86_64__
/* __alloca is a normal function call, which uses %rcx as the argument. */
cfi_startproc()
__alloca:
movq %rcx, %rax
/* FALLTHRU */
/* ___chkstk is a *special* function call, which uses %rax as the argument.
We avoid clobbering the 4 integer argument registers, %rcx, %rdx,
%r8 and %r9, which leaves us with %rax, %r10, and %r11 to use. */
.align 4
___chkstk:
popq %r11 /* pop return address */
cfi_adjust_cfa_offset(-8) /* indicate return address in r11 */
cfi_register(%rip, %r11)
movq %rsp, %r10
cmpq $0x1000, %rax /* > 4k ?*/
jb 2f
1: subq $0x1000, %r10 /* yes, move pointer down 4k*/
orl $0x0, (%r10) /* probe there */
subq $0x1000, %rax /* decrement count */
cmpq $0x1000, %rax
ja 1b /* and do it again */
2: subq %rax, %r10
movq %rsp, %rax /* hold CFA until return */
cfi_def_cfa_register(%rax)
orl $0x0, (%r10) /* less than 4k, just peek here */
movq %r10, %rsp /* decrement stack */
/* Push the return value back. Doing this instead of just
jumping to %r11 preserves the cached call-return stack
used by most modern processors. */
pushq %r11
ret
cfi_endproc()
#else
cfi_startproc()
___chkstk:
__alloca:
pushl %ecx /* save temp */
cfi_push(%eax)
leal 8(%esp), %ecx /* point past return addr */
cmpl $0x1000, %eax /* > 4k ?*/
jb 2f
1: subl $0x1000, %ecx /* yes, move pointer down 4k*/
orl $0x0, (%ecx) /* probe there */
subl $0x1000, %eax /* decrement count */
cmpl $0x1000, %eax
ja 1b /* and do it again */
2: subl %eax, %ecx
orl $0x0, (%ecx) /* less than 4k, just peek here */
movl %esp, %eax /* save current stack pointer */
cfi_def_cfa_register(%eax)
movl %ecx, %esp /* decrement stack */
movl (%eax), %ecx /* recover saved temp */
/* Copy the return register. Doing this instead of just jumping to
the address preserves the cached call-return stack used by most
modern processors. */
pushl 4(%eax)
ret
cfi_endproc()
#endif /* __x86_64__ */
#endif /* L_chkstk */
#ifdef L_chkstk_ms
/* ___chkstk_ms is a *special* function call, which uses %rax as the argument.
We avoid clobbering any registers. Unlike ___chkstk, it just probes the
stack and does no stack allocation. */
.global ___chkstk_ms
#ifdef __x86_64__
cfi_startproc()
___chkstk_ms:
pushq %rcx /* save temps */
cfi_push(%rcx)
pushq %rax
cfi_push(%rax)
cmpq $0x1000, %rax /* > 4k ?*/
leaq 24(%rsp), %rcx /* point past return addr */
jb 2f
1: subq $0x1000, %rcx /* yes, move pointer down 4k */
orq $0x0, (%rcx) /* probe there */
subq $0x1000, %rax /* decrement count */
cmpq $0x1000, %rax
ja 1b /* and do it again */
2: subq %rax, %rcx
orq $0x0, (%rcx) /* less than 4k, just peek here */
popq %rax
cfi_pop(%rax)
popq %rcx
cfi_pop(%rcx)
ret
cfi_endproc()
#else
cfi_startproc()
___chkstk_ms:
pushl %ecx /* save temp */
cfi_push(%ecx)
pushl %eax
cfi_push(%eax)
cmpl $0x1000, %eax /* > 4k ?*/
leal 12(%esp), %ecx /* point past return addr */
jb 2f
1: subl $0x1000, %ecx /* yes, move pointer down 4k*/
orl $0x0, (%ecx) /* probe there */
subl $0x1000, %eax /* decrement count */
cmpl $0x1000, %eax
ja 1b /* and do it again */
2: subl %eax, %ecx
orl $0x0, (%ecx) /* less than 4k, just peek here */
popl %eax
cfi_pop(%eax)
popl %ecx
cfi_pop(%ecx)
ret
cfi_endproc()
#endif /* __x86_64__ */
#endif /* L_chkstk_ms */