gcc/libstdc++-v3/libsupc++/Makefile.am

## Makefile for the GNU C++ Support library.
##
## Copyright (C) 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
##
## Process this file with automake to produce Makefile.in.
##
## This file is part of GCC.
##
## GCC is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.
##
## GCC is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with GCC; see the file COPYING.  If not, write to
## the Free Software Foundation, 59 Temple Place - Suite 330,
## Boston, MA 02111-1307, USA. 

MAINT_CHARSET = latin1

mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs

# Cross compiler and multilib support.
CC = @CC@
toolexecdir = @glibcxx_toolexecdir@
toolexeclibdir = @glibcxx_toolexeclibdir@


# Need this library to both be part of libstdc++.a, and installed
# separately too.
# 1) separate libsupc++.la 
toolexeclib_LTLIBRARIES = libsupc++.la
# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a
noinst_LTLIBRARIES = libsupc++convenience.la


# Compile flags that should be constant throughout the build, both for
# SUBDIRS and for libstdc++-v3 in general.
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@

# These bits are all figured out from configure. Look in acinclude.m4
# or configure.in to see how they are set. See GLIBCXX_EXPORT_FLAGS
# NB: DEBUGFLAGS have to be at the end so that -O2 can be overridden.
CONFIG_CXXFLAGS = \
	@SECTION_FLAGS@ @EXTRA_CXX_FLAGS@

# Warning flags to use.
WARN_CXXFLAGS = \
	@WARN_FLAGS@ $(WERROR) -fdiagnostics-show-location=once

LIBSUPCXX_CXXFLAGS = @LIBSUPCXX_PICFLAGS@

# Use common includes from acinclude.m4/GLIBCXX_EXPORT_INCLUDES
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
LIBSUPCXX_INCLUDES = @LIBSUPCXX_INCLUDES@
GCC_INCLUDES = -I$(toplevel_srcdir)/gcc -I$(toplevel_srcdir)/include

INCLUDES = \
	$(GCC_INCLUDES) $(GLIBCXX_INCLUDES) $(LIBSUPCXX_INCLUDES)

headers = \
	exception new typeinfo cxxabi.h exception_defines.h 

sources = \
	del_op.cc \
	del_opnt.cc \
	del_opv.cc \
	del_opvnt.cc \
	eh_alloc.cc \
	eh_aux_runtime.cc \
	eh_catch.cc \
	eh_exception.cc \
	eh_globals.cc \
	eh_personality.cc \
	eh_term_handler.cc \
	eh_terminate.cc \
	eh_throw.cc \
	eh_type.cc \
	eh_unex_handler.cc \
	guard.cc \
	new_handler.cc \
	new_op.cc \
	new_opnt.cc \
	new_opv.cc \
	new_opvnt.cc \
	pure.cc \
	tinfo.cc \
	tinfo2.cc \
	vec.cc \
	vterminate.cc

libsupc___la_SOURCES = $(sources) 
libsupc__convenience_la_SOURCES = $(sources) 

glibcxxinstalldir = $(gxx_include_dir)
glibcxxinstall_HEADERS = $(headers)

# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way.  Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion call for it. 
AM_CXXFLAGS = \
	-fno-implicit-templates \
	$(LIBSUPCXX_CXXFLAGS) \
	$(WARN_CXXFLAGS) \
	$(OPTIMIZE_CXXFLAGS) \
	$(CONFIG_CXXFLAGS) 

AM_MAKEFLAGS = \
	"gxx_include_dir=$(gxx_include_dir)"

# libstdc++ libtool notes

# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)

# 2) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured.  However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line.  The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up.  The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use.
#
# We have to put --tag disable-shared after --tag CXX lest things
# CXX undo the affect of disable-shared.
LTCXXCOMPILE = $(LIBTOOL) --tag CXX --tag disable-shared \
               --mode=compile $(CXX) $(INCLUDES) \
	       $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(AM_CXXFLAGS) 

# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used.  We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point.  So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = $(LIBTOOL) --tag CXX --tag disable-shared \
          --mode=link $(CXX) \
          @OPT_LDFLAGS@ @SECTION_LDFLAGS@ $(AM_CXXFLAGS) $(LDFLAGS) -o $@

# We have to have rules modified from the default to counteract SUN make
# prepending each of $(glibcxxinstall_HEADERS) with VPATH below.
install-glibcxxinstallHEADERS: $(glibcxxinstall_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(glibcxxinstalldir)
	@list='$(glibcxxinstall_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcxxinstalldir)/$$q"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcxxinstalldir)/$$q; \
	done

uninstall-glibcxxinstallHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(glibcxxinstall_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  rm -f $(DESTDIR)$(glibcxxinstalldir)/$$q; \
	done