gcc/libstdc++-v3/configure.in
Phil Edwards 974e336bb1 acinclude.m4: Uniform formatting.
2002-11-21  Phil Edwards  <pme@gcc.gnu.org>

	* acinclude.m4:  Uniform formatting.
	* configure.in:  x
	* configure.target:  x
	* aclocal.m4, configure:  Regenerate.

From-SVN: r59328
2002-11-21 07:34:30 +00:00

544 lines
17 KiB
Plaintext

# Process this file with autoconf to produce a configure script, like so:
# aclocal && autoconf && autoheader && automake
AC_PREREQ(2.13)
AC_INIT(src/ios.cc)
# This works around the fact that libtool configuration may change LD
# for this particular configuration, but some shells, instead of
# keeping the changes in LD private, export them just because LD is
# exported. Only used at the end of this file.
ORIGINAL_LD_FOR_MULTILIBS=$LD
PACKAGE=libstdc++
AC_SUBST(PACKAGE)
# For libtool versioning info, format is CURRENT:REVISION:AGE
libtool_VERSION=5:1:0
AC_SUBST(libtool_VERSION)
GLIBCPP_TOPREL_CONFIGURE
# Gets build, host, target, *_vendor, *_cpu, *_os, etc.
#
# You will slowly go insane if you do not grok the following fact: when
# building v3 as part of the compiler, the top-level /target/ becomes the
# library's /host/. `configure' then causes --target to default to --host,
# exactly like any other package using autoconf. Therefore, 'target' and
# 'host' will always be the same. This makes sense both for native and
# cross compilers, just think about it for a little while. :-)
#
# Also, if v3 is being configured as part of a cross compiler, the top-level
# configure script will pass the "real" host as $with_cross_host.
#
# AC 2.5x sets target_alias iff the user specified --target, but we use it
# everywhere, so we set it here just to be sure. In AC 2.13
# AC_CANONICAL_TARGET was known as AC_CANONICAL_SYSTEM.
AC_CANONICAL_SYSTEM
target_alias=${target_alias-$target}
AC_SUBST(target_alias)
# Runs configure.target, finds CC, CXX and assorted other critical bits.
# Must run this before the GLIBCPP_ENABLE_* macros below.
GLIBCPP_CONFIGURE(.)
AM_INIT_AUTOMAKE($PACKAGE, $gcc_version)
AM_CONFIG_HEADER(config.h)
AC_LIBTOOL_DLOPEN
AM_PROG_LIBTOOL
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
# Check for c++ or library specific bits that don't require linking.
#GLIBCPP_CHECK_COMPILER_VERSION
GLIBCPP_CHECK_GNU_MAKE
# Enable all the variable C++ stuff. C_MBCHAR must come early.
GLIBCPP_ENABLE_DEBUG($USE_MAINTAINER_MODE)
GLIBCPP_ENABLE_CSTDIO
GLIBCPP_ENABLE_CLOCALE
GLIBCPP_ENABLE_C_MBCHAR([yes])
GLIBCPP_ENABLE_C99([yes])
GLIBCPP_ENABLE_LONG_LONG([yes])
GLIBCPP_ENABLE_CHEADERS([$c_model])
GLIBCPP_ENABLE_THREADS
GLIBCPP_ENABLE_CXX_FLAGS([none])
GLIBCPP_ENABLE_SJLJ_EXCEPTIONS
GLIBCPP_ENABLE_LIBUNWIND_EXCEPTIONS
GLIBCPP_ENABLE_CONCEPT_CHECKS
# Check for headers necessary for libsupc++ using dyn-string.c/cxa_demangle.c
AC_CHECK_HEADERS(string.h stdlib.h)
# No surprises, no surprises...
if test $ATOMICITYH = cpu/generic ; then
AC_MSG_WARN([No native atomic operations are provided yet for this platform.])
if test $target_thread_file = single; then
AC_MSG_WARN([They cannot be faked when thread support is disabled.])
AC_MSG_WARN([Thread-safety of certain classes is not guaranteed.])
else
AC_MSG_WARN([They will be faked using a mutex.])
AC_MSG_WARN([Performance of certain classes will degrade as a result.])
fi
fi
if test -n "$with_cross_host" || test x"$build" != x"$host"; then
# We are being configured with some form of cross compiler.
GLIBCPP_IS_CROSS_COMPILING=1
# This lets us hard-code the functionality we know we'll have in the cross
# target environment. "Let" is a sugar-coated word placed on an especially
# dull and tedious hack, actually.
#
# Here's why GLIBCPP_CHECK_MATH_SUPPORT, and other autoconf macros
# that involve linking, can't be used:
# "cannot open sim-crt0.o"
# "cannot open crt0.o"
# etc. All this is because there currently exists no unified, consistent
# way for top level CC information to be passed down to target directories:
# newlib includes, newlib linking info, libgloss versus newlib crt0.o, etc.
# When all of that is done, all of this hokey, excessive AC_DEFINE junk for
# crosses can be removed.
# If Canadian cross, then don't pick up tools from the build directory.
# Used in GLIBCPP_EXPORT_INCLUDES (and nowhere else?).
if test -n "$with_cross_host" && test x"$build" != x"$with_cross_host"; then
CANADIAN=yes
else
CANADIAN=no
fi
# Construct crosses by hand, eliminating bits that need ld...
# GLIBCPP_CHECK_COMPILER_FEATURES
# GLIBCPP_CHECK_BUILTIN_MATH_SUPPORT
# GLIBCPP_CHECK_MATH_SUPPORT
case "$target" in
*-linux*)
os_include_dir="os/gnu-linux"
AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
machine/endian.h machine/param.h sys/machine.h sys/types.h \
fp.h locale.h float.h inttypes.h])
SECTION_FLAGS='-ffunction-sections -fdata-sections'
AC_SUBST(SECTION_FLAGS)
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_FINITE)
AC_DEFINE(HAVE_FINITEF)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_HYPOTF)
AC_DEFINE(HAVE_ISINF)
AC_DEFINE(HAVE_ISINFF)
AC_DEFINE(HAVE_ISNAN)
AC_DEFINE(HAVE_ISNANF)
AC_DEFINE(HAVE_SINCOS)
AC_DEFINE(HAVE_SINCOSF)
if test x"long_double_math_on_this_cpu" = x"yes"; then
AC_DEFINE(HAVE_FINITEL)
AC_DEFINE(HAVE_HYPOTL)
AC_DEFINE(HAVE_ISINFL)
AC_DEFINE(HAVE_ISNANL)
fi
;;
*-hpux*)
# Check for available headers.
AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
machine/endian.h machine/param.h sys/machine.h sys/types.h \
fp.h locale.h float.h inttypes.h])
SECTION_FLAGS='-ffunction-sections -fdata-sections'
AC_SUBST(SECTION_FLAGS)
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
os_include_dir="os/hpux"
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_HYPOT)
case "$target" in
*-hpux10*)
AC_DEFINE(HAVE_FINITE)
AC_DEFINE(HAVE_FINITEF)
AC_DEFINE(HAVE_ISINF)
AC_DEFINE(HAVE_ISINFF)
AC_DEFINE(HAVE_ISNAN)
AC_DEFINE(HAVE_ISNANF)
;;
esac
;;
*-netbsd*)
# Check for available headers.
AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
machine/endian.h machine/param.h sys/machine.h sys/types.h \
fp.h locale.h float.h inttypes.h])
SECTION_FLAGS='-ffunction-sections -fdata-sections'
AC_SUBST(SECTION_FLAGS)
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
os_include_dir="os/bsd/netbsd"
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_FINITEF)
AC_DEFINE(HAVE_FINITE)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_HYPOTF)
AC_DEFINE(HAVE_ISINF)
AC_DEFINE(HAVE_ISINFF)
AC_DEFINE(HAVE_ISNAN)
AC_DEFINE(HAVE_ISNANF)
if test x"long_double_math_on_this_cpu" = x"yes"; then
AC_DEFINE(HAVE_FINITEL)
AC_DEFINE(HAVE_ISINFL)
AC_DEFINE(HAVE_ISNANL)
fi
;;
*-freebsd*)
# Check for available headers.
AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
machine/endian.h machine/param.h sys/machine.h sys/types.h \
fp.h locale.h float.h inttypes.h sys/resource.h sys/stat.h \
sys/time.h unistd.h])
SECTION_FLAGS='-ffunction-sections -fdata-sections'
AC_SUBST(SECTION_FLAGS)
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
os_include_dir="os/bsd/freebsd"
AC_DEFINE(HAVE_LC_MESSAGES)
AC_DEFINE(HAVE_DRAND48)
AC_DEFINE(HAVE_GETPAGESIZE)
AC_DEFINE(HAVE_SETENV)
AC_DEFINE(HAVE_SIGSETJMP)
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_FINITEF)
AC_DEFINE(HAVE_FINITE)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_HYPOT)
AC_DEFINE(HAVE_HYPOTF)
AC_DEFINE(HAVE_ISINF)
AC_DEFINE(HAVE_ISNAN)
AC_DEFINE(HAVE_ISNANF)
if test x"long_double_math_on_this_cpu" = x"yes"; then
AC_DEFINE(HAVE_FINITEL)
AC_DEFINE(HAVE_ISINFL)
AC_DEFINE(HAVE_ISNANL)
fi
;;
*-mingw32*)
AC_CHECK_HEADERS([sys/types.h locale.h float.h])
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
os_include_dir="os/mingw32"
;;
*-windiss*)
os_include_dir="os/windiss"
;;
changequote(,)dnl
*-qnx6.[12]*)
changequote([,])dnl
SECTION_FLAGS='-ffunction-sections -fdata-sections'
AC_SUBST(SECTION_FLAGS)
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
os_include_dir="os/qnx/qnx6.1"
AC_DEFINE(HAVE_COSF)
AC_DEFINE(HAVE_COSL)
AC_DEFINE(HAVE_COSHF)
AC_DEFINE(HAVE_COSHL)
AC_DEFINE(HAVE_LOGF)
AC_DEFINE(HAVE_LOGL)
AC_DEFINE(HAVE_LOG10F)
AC_DEFINE(HAVE_LOG10L)
AC_DEFINE(HAVE_SINF)
AC_DEFINE(HAVE_SINL)
AC_DEFINE(HAVE_SINHF)
AC_DEFINE(HAVE_SINHL)
;;
*)
os_include_dir="os/newlib"
AC_DEFINE(HAVE_HYPOT)
;;
esac
case "$target" in
*-mingw32*)
;;
*-windiss*)
AC_DEFINE(HAVE_ACOSF)
AC_DEFINE(HAVE_ASINF)
AC_DEFINE(HAVE_ATAN2F)
AC_DEFINE(HAVE_ATANF)
AC_DEFINE(HAVE_CEILF)
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_COSF)
AC_DEFINE(HAVE_COSHF)
AC_DEFINE(HAVE_EXPF)
AC_DEFINE(HAVE_FABSF)
AC_DEFINE(HAVE_FLOORF)
AC_DEFINE(HAVE_FMODF)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_LDEXPF)
AC_DEFINE(HAVE_LOG10F)
AC_DEFINE(HAVE_LOGF)
AC_DEFINE(HAVE_MODFF)
AC_DEFINE(HAVE_POWF)
AC_DEFINE(HAVE_SINF)
AC_DEFINE(HAVE_SINHF)
AC_DEFINE(HAVE_SQRTF)
AC_DEFINE(HAVE_TANF)
AC_DEFINE(HAVE_TANHF)
;;
*-freebsd*)
# Must replicate generic section since we don't have strtof or strtold.
AC_DEFINE(HAVE_MMAP)
AC_DEFINE(HAVE_ACOSF)
AC_DEFINE(HAVE_ASINF)
AC_DEFINE(HAVE_ATAN2F)
AC_DEFINE(HAVE_ATANF)
AC_DEFINE(HAVE_CEILF)
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_COSF)
AC_DEFINE(HAVE_COSHF)
AC_DEFINE(HAVE_EXPF)
AC_DEFINE(HAVE_FABSF)
AC_DEFINE(HAVE_FLOORF)
AC_DEFINE(HAVE_FMODF)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_LDEXPF)
AC_DEFINE(HAVE_LOG10F)
AC_DEFINE(HAVE_LOGF)
AC_DEFINE(HAVE_MODFF)
AC_DEFINE(HAVE_POWF)
AC_DEFINE(HAVE_SINF)
AC_DEFINE(HAVE_SINHF)
AC_DEFINE(HAVE_SQRTF)
AC_DEFINE(HAVE_TANF)
AC_DEFINE(HAVE_TANHF)
;;
*)
# GLIBCPP_CHECK_STDLIB_SUPPORT
AC_DEFINE(HAVE_STRTOF)
AC_DEFINE(HAVE_STRTOLD)
# AC_FUNC_MMAP
AC_DEFINE(HAVE_MMAP)
AC_DEFINE(HAVE_ACOSF)
AC_DEFINE(HAVE_ASINF)
AC_DEFINE(HAVE_ATAN2F)
AC_DEFINE(HAVE_ATANF)
AC_DEFINE(HAVE_CEILF)
AC_DEFINE(HAVE_COPYSIGN)
AC_DEFINE(HAVE_COPYSIGNF)
AC_DEFINE(HAVE_COSF)
AC_DEFINE(HAVE_COSHF)
AC_DEFINE(HAVE_EXPF)
AC_DEFINE(HAVE_FABSF)
AC_DEFINE(HAVE_FLOORF)
AC_DEFINE(HAVE_FMODF)
AC_DEFINE(HAVE_FREXPF)
AC_DEFINE(HAVE_LDEXPF)
AC_DEFINE(HAVE_LOG10F)
AC_DEFINE(HAVE_LOGF)
AC_DEFINE(HAVE_MODFF)
AC_DEFINE(HAVE_POWF)
AC_DEFINE(HAVE_SINF)
AC_DEFINE(HAVE_SINHF)
AC_DEFINE(HAVE_SQRTF)
AC_DEFINE(HAVE_TANF)
AC_DEFINE(HAVE_TANHF)
;;
esac
# At some point, we should differentiate between architectures
# like x86, which have long double versions, and alpha/powerpc/etc.,
# which don't. For the time being, punt.
if test x"long_double_math_on_this_cpu" = x"yes"; then
AC_DEFINE(HAVE_ACOSL)
AC_DEFINE(HAVE_ASINL)
AC_DEFINE(HAVE_ATAN2L)
AC_DEFINE(HAVE_ATANL)
AC_DEFINE(HAVE_CEILL)
AC_DEFINE(HAVE_COPYSIGNL)
AC_DEFINE(HAVE_COSL)
AC_DEFINE(HAVE_COSHL)
AC_DEFINE(HAVE_EXPL)
AC_DEFINE(HAVE_FABSL)
AC_DEFINE(HAVE_FLOORL)
AC_DEFINE(HAVE_FMODL)
AC_DEFINE(HAVE_FREXPL)
AC_DEFINE(HAVE_LDEXPL)
AC_DEFINE(HAVE_LOG10L)
AC_DEFINE(HAVE_LOGL)
AC_DEFINE(HAVE_MODFL)
AC_DEFINE(HAVE_POWL)
AC_DEFINE(HAVE_SINCOSL)
AC_DEFINE(HAVE_SINL)
AC_DEFINE(HAVE_SINHL)
AC_DEFINE(HAVE_SQRTL)
AC_DEFINE(HAVE_TANL)
AC_DEFINE(HAVE_TANHL)
fi
else
# We are being configured natively. We can do more elaborate tests
# that include AC_TRY_COMPILE now, as the linker is assumed to be
# working.
GLIBCPP_IS_CROSS_COMPILING=0
CANADIAN=no
# Check for available headers.
AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h machine/endian.h \
machine/param.h sys/machine.h fp.h locale.h float.h inttypes.h gconv.h sys/types.h])
GLIBCPP_CHECK_COMPILER_FEATURES
GLIBCPP_CHECK_LINKER_FEATURES
GLIBCPP_CHECK_BUILTIN_MATH_SUPPORT
GLIBCPP_CHECK_MATH_SUPPORT
GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
GLIBCPP_CHECK_WCHAR_T_SUPPORT
GLIBCPP_CHECK_STDLIB_SUPPORT
GLIBCPP_CHECK_UNISTD_SUPPORT
AC_LC_MESSAGES
AC_TRY_COMPILE([
#include <setjmp.h>
], [sigjmp_buf env; while (! sigsetjmp (env, 1)) siglongjmp (env, 1);],
[AC_DEFINE(HAVE_SIGSETJMP, 1, [Define if sigsetjmp is available. ])
])
AC_FUNC_MMAP
# Establish limits on memory usage during 'make check'
GLIBCPP_CONFIGURE_TESTSUITE
fi
# This depends on the possibly-skipped linker test above.
GLIBCPP_ENABLE_SYMVERS([yes])
# Propagate the target-specific source directories through the build chain.
# (Nothing currently uses cpu_include_dir directly; only ATOMICITYH
# uses it, and it only gets used in this file.)
OS_INC_SRCDIR=config/${os_include_dir}
ATOMICITY_INC_SRCDIR=config/${ATOMICITYH}
AC_SUBST(OS_INC_SRCDIR)
AC_SUBST(ATOMICITY_INC_SRCDIR)
# Set up cross-compile flags
AC_SUBST(GLIBCPP_IS_CROSS_COMPILING) dnl Unused so far.
AM_CONDITIONAL(CANADIAN, test "$CANADIAN" = yes)
AC_CACHE_SAVE
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
else
multilib_arg=
fi
# Export all the install information
GLIBCPP_EXPORT_INSTALL_INFO
# Export all the include and flag information to makefiles.
GLIBCPP_EXPORT_INCLUDES
GLIBCPP_EXPORT_FLAGS
if ${CONFIG_SHELL-/bin/sh} ./libtool --tag CXX --features |
grep "enable shared" > /dev/null; then
LIBSUPCXX_PICFLAGS=-prefer-pic
else
LIBSUPCXX_PICFLAGS=
fi
AC_SUBST(LIBSUPCXX_PICFLAGS)
# Generate the various Makefiles, include files, and scripts.
# NB: Multilibs need MULTISUBDIR defined correctly in src/Makefile.am
# and libsupc++/Makefile.am so that multilib installs will end up
# installed in the correct place. To work around this not being passed
# down from config-ml.in -> top_srcdir/Makefile.am ->
# top_srcdir/{src,libsupc++}/Makefile.am, manually append it here.
AC_OUTPUT(Makefile \
include/Makefile src/Makefile \
libmath/Makefile libio/Makefile libsupc++/Makefile \
po/Makefile testsuite/Makefile mkcheck testsuite_flags,
[if test -n "$CONFIG_FILES"; then
LD="${ORIGINAL_LD_FOR_MULTILIBS}"
ac_file=Makefile . ${glibcpp_basedir}/../config-ml.in
grep '^MULTISUBDIR =' Makefile >> src/Makefile
grep '^MULTISUBDIR =' Makefile >> libsupc++/Makefile
fi
chmod +x mkcheck
chmod +x testsuite_flags
],
srcdir=${srcdir}
host=${host}
target=${target}
with_multisubdir=${with_multisubdir}
ac_configure_args="${multilib_arg} ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
glibcpp_basedir=${glibcpp_basedir}
CC="${CC}"
CXX="${CXX}"
)
dnl In autoconf 2.5x, AC_OUTPUT is replaced by three AC_ macros:
dnl AC_CONFIG_FILES(Makefile \
dnl include/Makefile src/Makefile \
dnl libmath/Makefile libio/Makefile libsupc++/Makefile \
dnl po/Makefile testsuite/Makefile mkcheck testsuite_flags)
dnl AC_CONFIG_COMMANDS([default],
dnl [if test -n "$CONFIG_FILES"; then
dnl ac_file=Makefile . ${glibcpp_basedir}/../config-ml.in
dnl grep '^MULTISUBDIR =' Makefile >> src/Makefile
dnl grep '^MULTISUBDIR =' Makefile >> libsupc++/Makefile
dnl fi
dnl chmod +x mkcheck
dnl chmod +x testsuite_flags
dnl ],
dnl srcdir=${srcdir}
dnl host=${host}
dnl target=${target}
dnl with_multisubdir=${with_multisubdir}
dnl ac_configure_args="${multilib_arg} ${ac_configure_args}"
dnl CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
dnl glibcpp_basedir=${glibcpp_basedir}
dnl CC="${CC}"
dnl CXX="${CXX}"
dnl )
dnl AC_OUTPUT
# Sanity checking & User-visible messages.
# Checks down here, otherwise they get scrolled off before
# the user will notice.
# Trying to get more people to read documentation. Possibly remove
# check and warn all the time. There is no "informational" AC_MSG_
# macro, so these are going to be printed even when --quiet/--silent
# is given.
if test ! -f stamp-sanity-warned; then
touch stamp-sanity-warned
echo ""
echo "Please make certain that you read the installation information here:"
echo " faster => ${srcdir}/docs/html/install.html"
echo " slower => <URL:http://gcc.gnu.org/onlinedocs/libstdc++/install.html>"
echo ""
echo "and the configuration information here:"
echo " faster => ${srcdir}/docs/html/configopts.html"
echo " slower => <URL:http://gcc.gnu.org/onlinedocs/libstdc++/configopts.html>"
echo ""
echo "before proceeding with ${_cv_gnu_make_command}."
echo ""
fi