OpenE2K/gcc
2
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
b77fe7b45f
gcc/gcc/regclass.c
Kelley Cook 366ccddb2b Update FSF address. 
From-SVN: r101317
2005-06-25 02:02:01 +00:00

2699 lines
78 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Compute register class preferences for pseudo-registers.
Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA. */
/* This file contains two passes of the compiler: reg_scan and reg_class.
It also defines some tables of information about the hardware registers
and a function init_reg_sets to initialize the tables. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "hard-reg-set.h"
#include "rtl.h"
#include "expr.h"
#include "tm_p.h"
#include "flags.h"
#include "basic-block.h"
#include "regs.h"
#include "function.h"
#include "insn-config.h"
#include "recog.h"
#include "reload.h"
#include "real.h"
#include "toplev.h"
#include "output.h"
#include "ggc.h"
#include "timevar.h"
#include "hashtab.h"
static void init_reg_sets_1 (void);
static void init_reg_autoinc (void);
/* If we have auto-increment or auto-decrement and we can have secondary
reloads, we are not allowed to use classes requiring secondary
reloads for pseudos auto-incremented since reload can't handle it. */
#ifdef AUTO_INC_DEC
#if defined(SECONDARY_INPUT_RELOAD_CLASS) || defined(SECONDARY_OUTPUT_RELOAD_CLASS)
#define FORBIDDEN_INC_DEC_CLASSES
#endif
#endif
/* Register tables used by many passes. */
/* Indexed by hard register number, contains 1 for registers
that are fixed use (stack pointer, pc, frame pointer, etc.).
These are the registers that cannot be used to allocate
a pseudo reg for general use. */
char fixed_regs[FIRST_PSEUDO_REGISTER];
/* Same info as a HARD_REG_SET. */
HARD_REG_SET fixed_reg_set;
/* Data for initializing the above. */
static const char initial_fixed_regs[] = FIXED_REGISTERS;
/* Indexed by hard register number, contains 1 for registers
that are fixed use or are clobbered by function calls.
These are the registers that cannot be used to allocate
a pseudo reg whose life crosses calls unless we are able
to save/restore them across the calls. */
char call_used_regs[FIRST_PSEUDO_REGISTER];
/* Same info as a HARD_REG_SET. */
HARD_REG_SET call_used_reg_set;
/* HARD_REG_SET of registers we want to avoid caller saving. */
HARD_REG_SET losing_caller_save_reg_set;
/* Data for initializing the above. */
static const char initial_call_used_regs[] = CALL_USED_REGISTERS;
/* This is much like call_used_regs, except it doesn't have to
be a superset of FIXED_REGISTERS. This vector indicates
what is really call clobbered, and is used when defining
regs_invalidated_by_call. */
#ifdef CALL_REALLY_USED_REGISTERS
char call_really_used_regs[] = CALL_REALLY_USED_REGISTERS;
#endif
#ifdef CALL_REALLY_USED_REGISTERS
#define CALL_REALLY_USED_REGNO_P(X) call_really_used_regs[X]
#else
#define CALL_REALLY_USED_REGNO_P(X) call_used_regs[X]
#endif
/* Indexed by hard register number, contains 1 for registers that are
fixed use or call used registers that cannot hold quantities across
calls even if we are willing to save and restore them. call fixed
registers are a subset of call used registers. */
char call_fixed_regs[FIRST_PSEUDO_REGISTER];
/* The same info as a HARD_REG_SET. */
HARD_REG_SET call_fixed_reg_set;
/* Number of non-fixed registers. */
int n_non_fixed_regs;
/* Indexed by hard register number, contains 1 for registers
that are being used for global register decls.
These must be exempt from ordinary flow analysis
and are also considered fixed. */
char global_regs[FIRST_PSEUDO_REGISTER];
/* Contains 1 for registers that are set or clobbered by calls. */
/* ??? Ideally, this would be just call_used_regs plus global_regs, but
for someone's bright idea to have call_used_regs strictly include
fixed_regs. Which leaves us guessing as to the set of fixed_regs
that are actually preserved. We know for sure that those associated
with the local stack frame are safe, but scant others. */
HARD_REG_SET regs_invalidated_by_call;
/* Table of register numbers in the order in which to try to use them. */
#ifdef REG_ALLOC_ORDER
int reg_alloc_order[FIRST_PSEUDO_REGISTER] = REG_ALLOC_ORDER;
/* The inverse of reg_alloc_order. */
int inv_reg_alloc_order[FIRST_PSEUDO_REGISTER];
#endif
/* For each reg class, a HARD_REG_SET saying which registers are in it. */
HARD_REG_SET reg_class_contents[N_REG_CLASSES];
/* The same information, but as an array of unsigned ints. We copy from
these unsigned ints to the table above. We do this so the tm.h files
do not have to be aware of the wordsize for machines with <= 64 regs.
Note that we hard-code 32 here, not HOST_BITS_PER_INT. */
#define N_REG_INTS \
((FIRST_PSEUDO_REGISTER + (32 - 1)) / 32)
static const unsigned int_reg_class_contents[N_REG_CLASSES][N_REG_INTS]
= REG_CLASS_CONTENTS;
/* For each reg class, number of regs it contains. */
unsigned int reg_class_size[N_REG_CLASSES];
/* For each reg class, table listing all the containing classes. */
static enum reg_class reg_class_superclasses[N_REG_CLASSES][N_REG_CLASSES];
/* For each reg class, table listing all the classes contained in it. */
static enum reg_class reg_class_subclasses[N_REG_CLASSES][N_REG_CLASSES];
/* For each pair of reg classes,
a largest reg class contained in their union. */
enum reg_class reg_class_subunion[N_REG_CLASSES][N_REG_CLASSES];
/* For each pair of reg classes,
the smallest reg class containing their union. */
enum reg_class reg_class_superunion[N_REG_CLASSES][N_REG_CLASSES];
/* Array containing all of the register names. */
const char * reg_names[] = REGISTER_NAMES;
/* Array containing all of the register class names. */
const char * reg_class_names[] = REG_CLASS_NAMES;
/* For each hard register, the widest mode object that it can contain.
This will be a MODE_INT mode if the register can hold integers. Otherwise
it will be a MODE_FLOAT or a MODE_CC mode, whichever is valid for the
register. */
enum machine_mode reg_raw_mode[FIRST_PSEUDO_REGISTER];
/* 1 if there is a register of given mode. */
bool have_regs_of_mode [MAX_MACHINE_MODE];
/* 1 if class does contain register of given mode. */
static char contains_reg_of_mode [N_REG_CLASSES] [MAX_MACHINE_MODE];
/* Maximum cost of moving from a register in one class to a register in
another class. Based on REGISTER_MOVE_COST. */
static int move_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES];
/* Similar, but here we don't have to move if the first index is a subset
of the second so in that case the cost is zero. */
static int may_move_in_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES];
/* Similar, but here we don't have to move if the first index is a superset
of the second so in that case the cost is zero. */
static int may_move_out_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES];
#ifdef FORBIDDEN_INC_DEC_CLASSES
/* These are the classes that regs which are auto-incremented or decremented
cannot be put in. */
static int forbidden_inc_dec_class[N_REG_CLASSES];
/* Indexed by n, is nonzero if (REG n) is used in an auto-inc or auto-dec
context. */
static char *in_inc_dec;
#endif /* FORBIDDEN_INC_DEC_CLASSES */
/* Sample MEM values for use by memory_move_secondary_cost. */
static GTY(()) rtx top_of_stack[MAX_MACHINE_MODE];
/* Linked list of reg_info structures allocated for reg_n_info array.
Grouping all of the allocated structures together in one lump
means only one call to bzero to clear them, rather than n smaller
calls. */
struct reg_info_data {
struct reg_info_data *next; /* next set of reg_info structures */
size_t min_index; /* minimum index # */
size_t max_index; /* maximum index # */
char used_p; /* nonzero if this has been used previously */
reg_info data[1]; /* beginning of the reg_info data */
};
static struct reg_info_data *reg_info_head;
/* No more global register variables may be declared; true once
regclass has been initialized. */
static int no_global_reg_vars = 0;
/* Specify number of hard registers given machine mode occupy. */
unsigned char hard_regno_nregs[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
/* Function called only once to initialize the above data on reg usage.
Once this is done, various switches may override. */
void
init_reg_sets (void)
{
int i, j;
/* First copy the register information from the initial int form into
the regsets. */
for (i = 0; i < N_REG_CLASSES; i++)
{
CLEAR_HARD_REG_SET (reg_class_contents[i]);
/* Note that we hard-code 32 here, not HOST_BITS_PER_INT. */
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (int_reg_class_contents[i][j / 32]
& ((unsigned) 1 << (j % 32)))
SET_HARD_REG_BIT (reg_class_contents[i], j);
}
/* Sanity check: make sure the target macros FIXED_REGISTERS and
CALL_USED_REGISTERS had the right number of initializers. */
gcc_assert (sizeof fixed_regs == sizeof initial_fixed_regs);
gcc_assert (sizeof call_used_regs == sizeof initial_call_used_regs);
memcpy (fixed_regs, initial_fixed_regs, sizeof fixed_regs);
memcpy (call_used_regs, initial_call_used_regs, sizeof call_used_regs);
memset (global_regs, 0, sizeof global_regs);
#ifdef REG_ALLOC_ORDER
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
inv_reg_alloc_order[reg_alloc_order[i]] = i;
#endif
}
/* After switches have been processed, which perhaps alter
`fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */
static void
init_reg_sets_1 (void)
{
unsigned int i, j;
unsigned int /* enum machine_mode */ m;
/* This macro allows the fixed or call-used registers
and the register classes to depend on target flags. */
#ifdef CONDITIONAL_REGISTER_USAGE
CONDITIONAL_REGISTER_USAGE;
#endif
/* Compute number of hard regs in each class. */
memset (reg_class_size, 0, sizeof reg_class_size);
for (i = 0; i < N_REG_CLASSES; i++)
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (TEST_HARD_REG_BIT (reg_class_contents[i], j))
reg_class_size[i]++;
/* Initialize the table of subunions.
reg_class_subunion[I][J] gets the largest-numbered reg-class
that is contained in the union of classes I and J. */
for (i = 0; i < N_REG_CLASSES; i++)
{
for (j = 0; j < N_REG_CLASSES; j++)
{
HARD_REG_SET c;
int k;
COPY_HARD_REG_SET (c, reg_class_contents[i]);
IOR_HARD_REG_SET (c, reg_class_contents[j]);
for (k = 0; k < N_REG_CLASSES; k++)
{
GO_IF_HARD_REG_SUBSET (reg_class_contents[k], c,
subclass1);
continue;
subclass1:
/* Keep the largest subclass. */ /* SPEE 900308 */
GO_IF_HARD_REG_SUBSET (reg_class_contents[k],
reg_class_contents[(int) reg_class_subunion[i][j]],
subclass2);
reg_class_subunion[i][j] = (enum reg_class) k;
subclass2:
;
}
}
}
/* Initialize the table of superunions.
reg_class_superunion[I][J] gets the smallest-numbered reg-class
containing the union of classes I and J. */
for (i = 0; i < N_REG_CLASSES; i++)
{
for (j = 0; j < N_REG_CLASSES; j++)
{
HARD_REG_SET c;
int k;
COPY_HARD_REG_SET (c, reg_class_contents[i]);
IOR_HARD_REG_SET (c, reg_class_contents[j]);
for (k = 0; k < N_REG_CLASSES; k++)
GO_IF_HARD_REG_SUBSET (c, reg_class_contents[k], superclass);
superclass:
reg_class_superunion[i][j] = (enum reg_class) k;
}
}
/* Initialize the tables of subclasses and superclasses of each reg class.
First clear the whole table, then add the elements as they are found. */
for (i = 0; i < N_REG_CLASSES; i++)
{
for (j = 0; j < N_REG_CLASSES; j++)
{
reg_class_superclasses[i][j] = LIM_REG_CLASSES;
reg_class_subclasses[i][j] = LIM_REG_CLASSES;
}
}
for (i = 0; i < N_REG_CLASSES; i++)
{
if (i == (int) NO_REGS)
continue;
for (j = i + 1; j < N_REG_CLASSES; j++)
{
enum reg_class *p;
GO_IF_HARD_REG_SUBSET (reg_class_contents[i], reg_class_contents[j],
subclass);
continue;
subclass:
/* Reg class I is a subclass of J.
Add J to the table of superclasses of I. */
p = &reg_class_superclasses[i][0];
while (*p != LIM_REG_CLASSES) p++;
*p = (enum reg_class) j;
/* Add I to the table of superclasses of J. */
p = &reg_class_subclasses[j][0];
while (*p != LIM_REG_CLASSES) p++;
*p = (enum reg_class) i;
}
}
/* Initialize "constant" tables. */
CLEAR_HARD_REG_SET (fixed_reg_set);
CLEAR_HARD_REG_SET (call_used_reg_set);
CLEAR_HARD_REG_SET (call_fixed_reg_set);
CLEAR_HARD_REG_SET (regs_invalidated_by_call);
memcpy (call_fixed_regs, fixed_regs, sizeof call_fixed_regs);
n_non_fixed_regs = 0;
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
{
/* call_used_regs must include fixed_regs. */
gcc_assert (!fixed_regs[i] || call_used_regs[i]);
#ifdef CALL_REALLY_USED_REGISTERS
/* call_used_regs must include call_really_used_regs. */
gcc_assert (!call_really_used_regs[i] || call_used_regs[i]);
#endif
if (fixed_regs[i])
SET_HARD_REG_BIT (fixed_reg_set, i);
else
n_non_fixed_regs++;
if (call_used_regs[i])
SET_HARD_REG_BIT (call_used_reg_set, i);
if (call_fixed_regs[i])
SET_HARD_REG_BIT (call_fixed_reg_set, i);
if (CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (i)))
SET_HARD_REG_BIT (losing_caller_save_reg_set, i);
/* There are a couple of fixed registers that we know are safe to
exclude from being clobbered by calls:
The frame pointer is always preserved across calls. The arg pointer
is if it is fixed. The stack pointer usually is, unless
RETURN_POPS_ARGS, in which case an explicit CLOBBER will be present.
If we are generating PIC code, the PIC offset table register is
preserved across calls, though the target can override that. */
if (i == STACK_POINTER_REGNUM)
;
else if (global_regs[i])
SET_HARD_REG_BIT (regs_invalidated_by_call, i);
else if (i == FRAME_POINTER_REGNUM)
;
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
else if (i == HARD_FRAME_POINTER_REGNUM)
;
#endif
#if ARG_POINTER_REGNUM != FRAME_POINTER_REGNUM
else if (i == ARG_POINTER_REGNUM && fixed_regs[i])
;
#endif
#ifndef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
else if (i == (unsigned) PIC_OFFSET_TABLE_REGNUM && fixed_regs[i])
;
#endif
else if (CALL_REALLY_USED_REGNO_P (i))
SET_HARD_REG_BIT (regs_invalidated_by_call, i);
}
memset (have_regs_of_mode, 0, sizeof (have_regs_of_mode));
memset (contains_reg_of_mode, 0, sizeof (contains_reg_of_mode));
for (m = 0; m < (unsigned int) MAX_MACHINE_MODE; m++)
for (i = 0; i < N_REG_CLASSES; i++)
if ((unsigned) CLASS_MAX_NREGS (i, m) <= reg_class_size[i])
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (!fixed_regs [j] && TEST_HARD_REG_BIT (reg_class_contents[i], j)
&& HARD_REGNO_MODE_OK (j, m))
{
contains_reg_of_mode [i][m] = 1;
have_regs_of_mode [m] = 1;
break;
}
/* Initialize the move cost table. Find every subset of each class
and take the maximum cost of moving any subset to any other. */
for (m = 0; m < (unsigned int) MAX_MACHINE_MODE; m++)
if (have_regs_of_mode [m])
{
for (i = 0; i < N_REG_CLASSES; i++)
if (contains_reg_of_mode [i][m])
for (j = 0; j < N_REG_CLASSES; j++)
{
int cost;
enum reg_class *p1, *p2;
if (!contains_reg_of_mode [j][m])
{
move_cost[m][i][j] = 65536;
may_move_in_cost[m][i][j] = 65536;
may_move_out_cost[m][i][j] = 65536;
}
else
{
cost = REGISTER_MOVE_COST (m, i, j);
for (p2 = &reg_class_subclasses[j][0];
*p2 != LIM_REG_CLASSES;
p2++)
if (*p2 != i && contains_reg_of_mode [*p2][m])
cost = MAX (cost, move_cost [m][i][*p2]);
for (p1 = &reg_class_subclasses[i][0];
*p1 != LIM_REG_CLASSES;
p1++)
if (*p1 != j && contains_reg_of_mode [*p1][m])
cost = MAX (cost, move_cost [m][*p1][j]);
move_cost[m][i][j] = cost;
if (reg_class_subset_p (i, j))
may_move_in_cost[m][i][j] = 0;
else
may_move_in_cost[m][i][j] = cost;
if (reg_class_subset_p (j, i))
may_move_out_cost[m][i][j] = 0;
else
may_move_out_cost[m][i][j] = cost;
}
}
else
for (j = 0; j < N_REG_CLASSES; j++)
{
move_cost[m][i][j] = 65536;
may_move_in_cost[m][i][j] = 65536;
may_move_out_cost[m][i][j] = 65536;
}
}
}
/* Compute the table of register modes.
These values are used to record death information for individual registers
(as opposed to a multi-register mode). */
void
init_reg_modes_once (void)
{
int i, j;
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (j = 0; j < MAX_MACHINE_MODE; j++)
hard_regno_nregs[i][j] = HARD_REGNO_NREGS(i, (enum machine_mode)j);
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
{
reg_raw_mode[i] = choose_hard_reg_mode (i, 1, false);
/* If we couldn't find a valid mode, just use the previous mode.
??? One situation in which we need to do this is on the mips where
HARD_REGNO_NREGS (fpreg, [SD]Fmode) returns 2. Ideally we'd like
to use DF mode for the even registers and VOIDmode for the odd
(for the cpu models where the odd ones are inaccessible). */
if (reg_raw_mode[i] == VOIDmode)
reg_raw_mode[i] = i == 0 ? word_mode : reg_raw_mode[i-1];
}
}
/* Finish initializing the register sets and
initialize the register modes. */
void
init_regs (void)
{
/* This finishes what was started by init_reg_sets, but couldn't be done
until after register usage was specified. */
init_reg_sets_1 ();
init_reg_autoinc ();
}
/* Initialize some fake stack-frame MEM references for use in
memory_move_secondary_cost. */
void
init_fake_stack_mems (void)
{
#ifdef HAVE_SECONDARY_RELOADS
{
int i;
for (i = 0; i < MAX_MACHINE_MODE; i++)
top_of_stack[i] = gen_rtx_MEM (i, stack_pointer_rtx);
}
#endif
}
#ifdef HAVE_SECONDARY_RELOADS
/* Compute extra cost of moving registers to/from memory due to reloads.
Only needed if secondary reloads are required for memory moves. */
int
memory_move_secondary_cost (enum machine_mode mode, enum reg_class class, int in)
{
enum reg_class altclass;
int partial_cost = 0;
/* We need a memory reference to feed to SECONDARY... macros. */
/* mem may be unused even if the SECONDARY_ macros are defined. */
rtx mem ATTRIBUTE_UNUSED = top_of_stack[(int) mode];
if (in)
{
#ifdef SECONDARY_INPUT_RELOAD_CLASS
altclass = SECONDARY_INPUT_RELOAD_CLASS (class, mode, mem);
#else
altclass = NO_REGS;
#endif
}
else
{
#ifdef SECONDARY_OUTPUT_RELOAD_CLASS
altclass = SECONDARY_OUTPUT_RELOAD_CLASS (class, mode, mem);
#else
altclass = NO_REGS;
#endif
}
if (altclass == NO_REGS)
return 0;
if (in)
partial_cost = REGISTER_MOVE_COST (mode, altclass, class);
else
partial_cost = REGISTER_MOVE_COST (mode, class, altclass);
if (class == altclass)
/* This isn't simply a copy-to-temporary situation. Can't guess
what it is, so MEMORY_MOVE_COST really ought not to be calling
here in that case.
I'm tempted to put in an assert here, but returning this will
probably only give poor estimates, which is what we would've
had before this code anyways. */
return partial_cost;
/* Check if the secondary reload register will also need a
secondary reload. */
return memory_move_secondary_cost (mode, altclass, in) + partial_cost;
}
#endif
/* Return a machine mode that is legitimate for hard reg REGNO and large
enough to save nregs. If we can't find one, return VOIDmode.
If CALL_SAVED is true, only consider modes that are call saved. */
enum machine_mode
choose_hard_reg_mode (unsigned int regno ATTRIBUTE_UNUSED,
unsigned int nregs, bool call_saved)
{
unsigned int /* enum machine_mode */ m;
enum machine_mode found_mode = VOIDmode, mode;
/* We first look for the largest integer mode that can be validly
held in REGNO. If none, we look for the largest floating-point mode.
If we still didn't find a valid mode, try CCmode. */
for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
if ((unsigned) hard_regno_nregs[regno][mode] == nregs
&& HARD_REGNO_MODE_OK (regno, mode)
&& (! call_saved || ! HARD_REGNO_CALL_PART_CLOBBERED (regno, mode)))
found_mode = mode;
if (found_mode != VOIDmode)
return found_mode;
for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
if ((unsigned) hard_regno_nregs[regno][mode] == nregs
&& HARD_REGNO_MODE_OK (regno, mode)
&& (! call_saved || ! HARD_REGNO_CALL_PART_CLOBBERED (regno, mode)))
found_mode = mode;
if (found_mode != VOIDmode)
return found_mode;
for (mode = GET_CLASS_NARROWEST_MODE (MODE_VECTOR_FLOAT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
if ((unsigned) hard_regno_nregs[regno][mode] == nregs
&& HARD_REGNO_MODE_OK (regno, mode)
&& (! call_saved || ! HARD_REGNO_CALL_PART_CLOBBERED (regno, mode)))
found_mode = mode;
if (found_mode != VOIDmode)
return found_mode;
for (mode = GET_CLASS_NARROWEST_MODE (MODE_VECTOR_INT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
if ((unsigned) hard_regno_nregs[regno][mode] == nregs
&& HARD_REGNO_MODE_OK (regno, mode)
&& (! call_saved || ! HARD_REGNO_CALL_PART_CLOBBERED (regno, mode)))
found_mode = mode;
if (found_mode != VOIDmode)
return found_mode;
/* Iterate over all of the CCmodes. */
for (m = (unsigned int) CCmode; m < (unsigned int) NUM_MACHINE_MODES; ++m)
{
mode = (enum machine_mode) m;
if ((unsigned) hard_regno_nregs[regno][mode] == nregs
&& HARD_REGNO_MODE_OK (regno, mode)
&& (! call_saved || ! HARD_REGNO_CALL_PART_CLOBBERED (regno, mode)))
return mode;
}
/* We can't find a mode valid for this register. */
return VOIDmode;
}
/* Specify the usage characteristics of the register named NAME.
It should be a fixed register if FIXED and a
call-used register if CALL_USED. */
void
fix_register (const char *name, int fixed, int call_used)
{
int i;
/* Decode the name and update the primary form of
the register info. */
if ((i = decode_reg_name (name)) >= 0)
{
if ((i == STACK_POINTER_REGNUM
#ifdef HARD_FRAME_POINTER_REGNUM
|| i == HARD_FRAME_POINTER_REGNUM
#else
|| i == FRAME_POINTER_REGNUM
#endif
)
&& (fixed == 0 || call_used == 0))
{
static const char * const what_option[2][2] = {
{ "call-saved", "call-used" },
{ "no-such-option", "fixed" }};
error ("can't use '%s' as a %s register", name,
what_option[fixed][call_used]);
}
else
{
fixed_regs[i] = fixed;
call_used_regs[i] = call_used;
#ifdef CALL_REALLY_USED_REGISTERS
if (fixed == 0)
call_really_used_regs[i] = call_used;
#endif
}
}
else
{
warning (0, "unknown register name: %s", name);
}
}
/* Mark register number I as global. */
void
globalize_reg (int i)
{
if (fixed_regs[i] == 0 && no_global_reg_vars)
error ("global register variable follows a function definition");
if (global_regs[i])
{
warning (0, "register used for two global register variables");
return;
}
if (call_used_regs[i] && ! fixed_regs[i])
warning (0, "call-clobbered register used for global register variable");
global_regs[i] = 1;
/* If we're globalizing the frame pointer, we need to set the
appropriate regs_invalidated_by_call bit, even if it's already
set in fixed_regs. */
if (i != STACK_POINTER_REGNUM)
SET_HARD_REG_BIT (regs_invalidated_by_call, i);
/* If already fixed, nothing else to do. */
if (fixed_regs[i])
return;
fixed_regs[i] = call_used_regs[i] = call_fixed_regs[i] = 1;
#ifdef CALL_REALLY_USED_REGISTERS
call_really_used_regs[i] = 1;
#endif
n_non_fixed_regs--;
SET_HARD_REG_BIT (fixed_reg_set, i);
SET_HARD_REG_BIT (call_used_reg_set, i);
SET_HARD_REG_BIT (call_fixed_reg_set, i);
}
/* Now the data and code for the `regclass' pass, which happens
just before local-alloc. */
/* The `costs' struct records the cost of using a hard register of each class
and of using memory for each pseudo. We use this data to set up
register class preferences. */
struct costs
{
int cost[N_REG_CLASSES];
int mem_cost;
};
/* Structure used to record preferences of given pseudo. */
struct reg_pref
{
/* (enum reg_class) prefclass is the preferred class. */
char prefclass;
/* altclass is a register class that we should use for allocating
pseudo if no register in the preferred class is available.
If no register in this class is available, memory is preferred.
It might appear to be more general to have a bitmask of classes here,
but since it is recommended that there be a class corresponding to the
union of most major pair of classes, that generality is not required. */
char altclass;
};
/* Record the cost of each class for each pseudo. */
static struct costs *costs;
/* Initialized once, and used to initialize cost values for each insn. */
static struct costs init_cost;
/* Record preferences of each pseudo.
This is available after `regclass' is run. */
static struct reg_pref *reg_pref;
/* Allocated buffers for reg_pref. */
static struct reg_pref *reg_pref_buffer;
/* Frequency of executions of current insn. */
static int frequency;
static rtx scan_one_insn (rtx, int);
static void record_operand_costs (rtx, struct costs *, struct reg_pref *);
static void dump_regclass (FILE *);
static void record_reg_classes (int, int, rtx *, enum machine_mode *,
const char **, rtx, struct costs *,
struct reg_pref *);
static int copy_cost (rtx, enum machine_mode, enum reg_class, int);
static void record_address_regs (rtx, enum reg_class, int);
#ifdef FORBIDDEN_INC_DEC_CLASSES
static int auto_inc_dec_reg_p (rtx, enum machine_mode);
#endif
static void reg_scan_mark_refs (rtx, rtx, int, unsigned int);
/* Return the reg_class in which pseudo reg number REGNO is best allocated.
This function is sometimes called before the info has been computed.
When that happens, just return GENERAL_REGS, which is innocuous. */
enum reg_class
reg_preferred_class (int regno)
{
if (reg_pref == 0)
return GENERAL_REGS;
return (enum reg_class) reg_pref[regno].prefclass;
}
enum reg_class
reg_alternate_class (int regno)
{
if (reg_pref == 0)
return ALL_REGS;
return (enum reg_class) reg_pref[regno].altclass;
}
/* Initialize some global data for this pass. */
void
regclass_init (void)
{
int i;
init_cost.mem_cost = 10000;
for (i = 0; i < N_REG_CLASSES; i++)
init_cost.cost[i] = 10000;
/* This prevents dump_flow_info from losing if called
before regclass is run. */
reg_pref = NULL;
/* No more global register variables may be declared. */
no_global_reg_vars = 1;
}
/* Dump register costs. */
static void
dump_regclass (FILE *dump)
{
int i;
for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
{
int /* enum reg_class */ class;
if (REG_N_REFS (i))
{
fprintf (dump, " Register %i costs:", i);
for (class = 0; class < (int) N_REG_CLASSES; class++)
if (contains_reg_of_mode [(enum reg_class) class][PSEUDO_REGNO_MODE (i)]
#ifdef FORBIDDEN_INC_DEC_CLASSES
&& (!in_inc_dec[i]
|| !forbidden_inc_dec_class[(enum reg_class) class])
#endif
#ifdef CANNOT_CHANGE_MODE_CLASS
&& ! invalid_mode_change_p (i, (enum reg_class) class,
PSEUDO_REGNO_MODE (i))
#endif
)
fprintf (dump, " %s:%i", reg_class_names[class],
costs[i].cost[(enum reg_class) class]);
fprintf (dump, " MEM:%i\n", costs[i].mem_cost);
}
}
}
/* Calculate the costs of insn operands. */
static void
record_operand_costs (rtx insn, struct costs *op_costs,
struct reg_pref *reg_pref)
{
const char *constraints[MAX_RECOG_OPERANDS];
enum machine_mode modes[MAX_RECOG_OPERANDS];
int i;
for (i = 0; i < recog_data.n_operands; i++)
{
constraints[i] = recog_data.constraints[i];
modes[i] = recog_data.operand_mode[i];
}
/* If we get here, we are set up to record the costs of all the
operands for this insn. Start by initializing the costs.
Then handle any address registers. Finally record the desired
classes for any pseudos, doing it twice if some pair of
operands are commutative. */
for (i = 0; i < recog_data.n_operands; i++)
{
op_costs[i] = init_cost;
if (GET_CODE (recog_data.operand[i]) == SUBREG)
recog_data.operand[i] = SUBREG_REG (recog_data.operand[i]);
if (MEM_P (recog_data.operand[i]))
record_address_regs (XEXP (recog_data.operand[i], 0),
MODE_BASE_REG_CLASS (modes[i]), frequency * 2);
else if (constraints[i][0] == 'p'
|| EXTRA_ADDRESS_CONSTRAINT (constraints[i][0], constraints[i]))
record_address_regs (recog_data.operand[i],
MODE_BASE_REG_CLASS (modes[i]), frequency * 2);
}
/* Check for commutative in a separate loop so everything will
have been initialized. We must do this even if one operand
is a constant--see addsi3 in m68k.md. */
for (i = 0; i < (int) recog_data.n_operands - 1; i++)
if (constraints[i][0] == '%')
{
const char *xconstraints[MAX_RECOG_OPERANDS];
int j;
/* Handle commutative operands by swapping the constraints.
We assume the modes are the same. */
for (j = 0; j < recog_data.n_operands; j++)
xconstraints[j] = constraints[j];
xconstraints[i] = constraints[i+1];
xconstraints[i+1] = constraints[i];
record_reg_classes (recog_data.n_alternatives, recog_data.n_operands,
recog_data.operand, modes,
xconstraints, insn, op_costs, reg_pref);
}
record_reg_classes (recog_data.n_alternatives, recog_data.n_operands,
recog_data.operand, modes,
constraints, insn, op_costs, reg_pref);
}
/* Subroutine of regclass, processes one insn INSN. Scan it and record each
time it would save code to put a certain register in a certain class.
PASS, when nonzero, inhibits some optimizations which need only be done
once.
Return the last insn processed, so that the scan can be continued from
there. */
static rtx
scan_one_insn (rtx insn, int pass)
{
enum rtx_code pat_code;
rtx set, note;
int i, j;
struct costs op_costs[MAX_RECOG_OPERANDS];
if (!INSN_P (insn))
return insn;
pat_code = GET_CODE (PATTERN (insn));
if (pat_code == USE
|| pat_code == CLOBBER
|| pat_code == ASM_INPUT
|| pat_code == ADDR_VEC
|| pat_code == ADDR_DIFF_VEC)
return insn;
set = single_set (insn);
extract_insn (insn);
/* If this insn loads a parameter from its stack slot, then
it represents a savings, rather than a cost, if the
parameter is stored in memory. Record this fact. */
if (set != 0 && REG_P (SET_DEST (set))
&& MEM_P (SET_SRC (set))
&& (note = find_reg_note (insn, REG_EQUIV,
NULL_RTX)) != 0
&& MEM_P (XEXP (note, 0)))
{
costs[REGNO (SET_DEST (set))].mem_cost
-= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set)),
GENERAL_REGS, 1)
* frequency);
record_address_regs (XEXP (SET_SRC (set), 0),
MODE_BASE_REG_CLASS (VOIDmode), frequency * 2);
return insn;
}
/* Improve handling of two-address insns such as
(set X (ashift CONST Y)) where CONST must be made to
match X. Change it into two insns: (set X CONST)
(set X (ashift X Y)). If we left this for reloading, it
would probably get three insns because X and Y might go
in the same place. This prevents X and Y from receiving
the same hard reg.
We can only do this if the modes of operands 0 and 1
(which might not be the same) are tieable and we only need
do this during our first pass. */
if (pass == 0 && optimize
&& recog_data.n_operands >= 3
&& recog_data.constraints[1][0] == '0'
&& recog_data.constraints[1][1] == 0
&& CONSTANT_P (recog_data.operand[1])
&& ! rtx_equal_p (recog_data.operand[0], recog_data.operand[1])
&& ! rtx_equal_p (recog_data.operand[0], recog_data.operand[2])
&& REG_P (recog_data.operand[0])
&& MODES_TIEABLE_P (GET_MODE (recog_data.operand[0]),
recog_data.operand_mode[1]))
{
rtx previnsn = prev_real_insn (insn);
rtx dest
= gen_lowpart (recog_data.operand_mode[1],
recog_data.operand[0]);
rtx newinsn
= emit_insn_before (gen_move_insn (dest, recog_data.operand[1]), insn);
/* If this insn was the start of a basic block,
include the new insn in that block.
We need not check for code_label here;
while a basic block can start with a code_label,
INSN could not be at the beginning of that block. */
if (previnsn == 0 || JUMP_P (previnsn))
{
basic_block b;
FOR_EACH_BB (b)
if (insn == BB_HEAD (b))
BB_HEAD (b) = newinsn;
}
/* This makes one more setting of new insns's dest. */
REG_N_SETS (REGNO (recog_data.operand[0]))++;
REG_N_REFS (REGNO (recog_data.operand[0]))++;
REG_FREQ (REGNO (recog_data.operand[0])) += frequency;
*recog_data.operand_loc[1] = recog_data.operand[0];
REG_N_REFS (REGNO (recog_data.operand[0]))++;
REG_FREQ (REGNO (recog_data.operand[0])) += frequency;
for (i = recog_data.n_dups - 1; i >= 0; i--)
if (recog_data.dup_num[i] == 1)
{
*recog_data.dup_loc[i] = recog_data.operand[0];
REG_N_REFS (REGNO (recog_data.operand[0]))++;
REG_FREQ (REGNO (recog_data.operand[0])) += frequency;
}
return PREV_INSN (newinsn);
}
record_operand_costs (insn, op_costs, reg_pref);
/* Now add the cost for each operand to the total costs for
its register. */
for (i = 0; i < recog_data.n_operands; i++)
if (REG_P (recog_data.operand[i])
&& REGNO (recog_data.operand[i]) >= FIRST_PSEUDO_REGISTER)
{
int regno = REGNO (recog_data.operand[i]);
struct costs *p = &costs[regno], *q = &op_costs[i];
p->mem_cost += q->mem_cost * frequency;
for (j = 0; j < N_REG_CLASSES; j++)
p->cost[j] += q->cost[j] * frequency;
}
return insn;
}
/* Initialize information about which register classes can be used for
pseudos that are auto-incremented or auto-decremented. */
static void
init_reg_autoinc (void)
{
#ifdef FORBIDDEN_INC_DEC_CLASSES
int i;
for (i = 0; i < N_REG_CLASSES; i++)
{
rtx r = gen_rtx_raw_REG (VOIDmode, 0);
enum machine_mode m;
int j;
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (TEST_HARD_REG_BIT (reg_class_contents[i], j))
{
REGNO (r) = j;
for (m = VOIDmode; (int) m < (int) MAX_MACHINE_MODE;
m = (enum machine_mode) ((int) m + 1))
if (HARD_REGNO_MODE_OK (j, m))
{
PUT_MODE (r, m);
/* If a register is not directly suitable for an
auto-increment or decrement addressing mode and
requires secondary reloads, disallow its class from
being used in such addresses. */
if ((0
#ifdef SECONDARY_RELOAD_CLASS
|| (SECONDARY_RELOAD_CLASS (MODE_BASE_REG_CLASS (VOIDmode), m, r)
!= NO_REGS)
#else
#ifdef SECONDARY_INPUT_RELOAD_CLASS
|| (SECONDARY_INPUT_RELOAD_CLASS (MODE_BASE_REG_CLASS (VOIDmode), m, r)
!= NO_REGS)
#endif
#ifdef SECONDARY_OUTPUT_RELOAD_CLASS
|| (SECONDARY_OUTPUT_RELOAD_CLASS (MODE_BASE_REG_CLASS (VOIDmode), m, r)
!= NO_REGS)
#endif
#endif
)
&& ! auto_inc_dec_reg_p (r, m))
forbidden_inc_dec_class[i] = 1;
}
}
}
#endif /* FORBIDDEN_INC_DEC_CLASSES */
}
/* This is a pass of the compiler that scans all instructions
and calculates the preferred class for each pseudo-register.
This information can be accessed later by calling `reg_preferred_class'.
This pass comes just before local register allocation. */
void
regclass (rtx f, int nregs, FILE *dump)
{
rtx insn;
int i;
int pass;
init_recog ();
costs = xmalloc (nregs * sizeof (struct costs));
#ifdef FORBIDDEN_INC_DEC_CLASSES
in_inc_dec = xmalloc (nregs);
#endif /* FORBIDDEN_INC_DEC_CLASSES */
/* Normally we scan the insns once and determine the best class to use for
each register. However, if -fexpensive_optimizations are on, we do so
twice, the second time using the tentative best classes to guide the
selection. */
for (pass = 0; pass <= flag_expensive_optimizations; pass++)
{
basic_block bb;
if (dump)
fprintf (dump, "\n\nPass %i\n\n",pass);
/* Zero out our accumulation of the cost of each class for each reg. */
memset (costs, 0, nregs * sizeof (struct costs));
#ifdef FORBIDDEN_INC_DEC_CLASSES
memset (in_inc_dec, 0, nregs);
#endif
/* Scan the instructions and record each time it would
save code to put a certain register in a certain class. */
if (!optimize)
{
frequency = REG_FREQ_MAX;
for (insn = f; insn; insn = NEXT_INSN (insn))
insn = scan_one_insn (insn, pass);
}
else
FOR_EACH_BB (bb)
{
/* Show that an insn inside a loop is likely to be executed three
times more than insns outside a loop. This is much more
aggressive than the assumptions made elsewhere and is being
tried as an experiment. */
frequency = REG_FREQ_FROM_BB (bb);
for (insn = BB_HEAD (bb); ; insn = NEXT_INSN (insn))
{
insn = scan_one_insn (insn, pass);
if (insn == BB_END (bb))
break;
}
}
/* Now for each register look at how desirable each class is
and find which class is preferred. Store that in
`prefclass'. Record in `altclass' the largest register
class any of whose registers is better than memory. */
if (pass == 0)
reg_pref = reg_pref_buffer;
if (dump)
{
dump_regclass (dump);
fprintf (dump,"\n");
}
for (i = FIRST_PSEUDO_REGISTER; i < nregs; i++)
{
int best_cost = (1 << (HOST_BITS_PER_INT - 2)) - 1;
enum reg_class best = ALL_REGS, alt = NO_REGS;
/* This is an enum reg_class, but we call it an int
to save lots of casts. */
int class;
struct costs *p = &costs[i];
/* In non-optimizing compilation REG_N_REFS is not initialized
yet. */
if (optimize && !REG_N_REFS (i) && !REG_N_SETS (i))
continue;
for (class = (int) ALL_REGS - 1; class > 0; class--)
{
/* Ignore classes that are too small for this operand or
invalid for an operand that was auto-incremented. */
if (!contains_reg_of_mode [class][PSEUDO_REGNO_MODE (i)]
#ifdef FORBIDDEN_INC_DEC_CLASSES
|| (in_inc_dec[i] && forbidden_inc_dec_class[class])
#endif
#ifdef CANNOT_CHANGE_MODE_CLASS
|| invalid_mode_change_p (i, (enum reg_class) class,
PSEUDO_REGNO_MODE (i))
#endif
)
;
else if (p->cost[class] < best_cost)
{
best_cost = p->cost[class];
best = (enum reg_class) class;
}
else if (p->cost[class] == best_cost)
best = reg_class_subunion[(int) best][class];
}
/* Record the alternate register class; i.e., a class for which
every register in it is better than using memory. If adding a
class would make a smaller class (i.e., no union of just those
classes exists), skip that class. The major unions of classes
should be provided as a register class. Don't do this if we
will be doing it again later. */
if ((pass == 1 || dump) || ! flag_expensive_optimizations)
for (class = 0; class < N_REG_CLASSES; class++)
if (p->cost[class] < p->mem_cost
&& (reg_class_size[(int) reg_class_subunion[(int) alt][class]]
> reg_class_size[(int) alt])
#ifdef FORBIDDEN_INC_DEC_CLASSES
&& ! (in_inc_dec[i] && forbidden_inc_dec_class[class])
#endif
#ifdef CANNOT_CHANGE_MODE_CLASS
&& ! invalid_mode_change_p (i, (enum reg_class) class,
PSEUDO_REGNO_MODE (i))
#endif
)
alt = reg_class_subunion[(int) alt][class];
/* If we don't add any classes, nothing to try. */
if (alt == best)
alt = NO_REGS;
if (dump
&& (reg_pref[i].prefclass != (int) best
|| reg_pref[i].altclass != (int) alt))
{
fprintf (dump, " Register %i", i);
if (alt == ALL_REGS || best == ALL_REGS)
fprintf (dump, " pref %s\n", reg_class_names[(int) best]);
else if (alt == NO_REGS)
fprintf (dump, " pref %s or none\n", reg_class_names[(int) best]);
else
fprintf (dump, " pref %s, else %s\n",
reg_class_names[(int) best],
reg_class_names[(int) alt]);
}
/* We cast to (int) because (char) hits bugs in some compilers. */
reg_pref[i].prefclass = (int) best;
reg_pref[i].altclass = (int) alt;
}
}
#ifdef FORBIDDEN_INC_DEC_CLASSES
free (in_inc_dec);
#endif
free (costs);
}
/* Record the cost of using memory or registers of various classes for
the operands in INSN.
N_ALTS is the number of alternatives.
N_OPS is the number of operands.
OPS is an array of the operands.
MODES are the modes of the operands, in case any are VOIDmode.
CONSTRAINTS are the constraints to use for the operands. This array
is modified by this procedure.
This procedure works alternative by alternative. For each alternative
we assume that we will be able to allocate all pseudos to their ideal
register class and calculate the cost of using that alternative. Then
we compute for each operand that is a pseudo-register, the cost of
having the pseudo allocated to each register class and using it in that
alternative. To this cost is added the cost of the alternative.
The cost of each class for this insn is its lowest cost among all the
alternatives. */
static void
record_reg_classes (int n_alts, int n_ops, rtx *ops,
enum machine_mode *modes, const char **constraints,
rtx insn, struct costs *op_costs,
struct reg_pref *reg_pref)
{
int alt;
int i, j;
rtx set;
/* Process each alternative, each time minimizing an operand's cost with
the cost for each operand in that alternative. */
for (alt = 0; alt < n_alts; alt++)
{
struct costs this_op_costs[MAX_RECOG_OPERANDS];
int alt_fail = 0;
int alt_cost = 0;
enum reg_class classes[MAX_RECOG_OPERANDS];
int allows_mem[MAX_RECOG_OPERANDS];
int class;
for (i = 0; i < n_ops; i++)
{
const char *p = constraints[i];
rtx op = ops[i];
enum machine_mode mode = modes[i];
int allows_addr = 0;
int win = 0;
unsigned char c;
/* Initially show we know nothing about the register class. */
classes[i] = NO_REGS;
allows_mem[i] = 0;
/* If this operand has no constraints at all, we can conclude
nothing about it since anything is valid. */
if (*p == 0)
{
if (REG_P (op) && REGNO (op) >= FIRST_PSEUDO_REGISTER)
memset (&this_op_costs[i], 0, sizeof this_op_costs[i]);
continue;
}
/* If this alternative is only relevant when this operand
matches a previous operand, we do different things depending
on whether this operand is a pseudo-reg or not. We must process
any modifiers for the operand before we can make this test. */
while (*p == '%' || *p == '=' || *p == '+' || *p == '&')
p++;
if (p[0] >= '0' && p[0] <= '0' + i && (p[1] == ',' || p[1] == 0))
{
/* Copy class and whether memory is allowed from the matching
alternative. Then perform any needed cost computations
and/or adjustments. */
j = p[0] - '0';
classes[i] = classes[j];
allows_mem[i] = allows_mem[j];
if (!REG_P (op) || REGNO (op) < FIRST_PSEUDO_REGISTER)
{
/* If this matches the other operand, we have no added
cost and we win. */
if (rtx_equal_p (ops[j], op))
win = 1;
/* If we can put the other operand into a register, add to
the cost of this alternative the cost to copy this
operand to the register used for the other operand. */
else if (classes[j] != NO_REGS)
alt_cost += copy_cost (op, mode, classes[j], 1), win = 1;
}
else if (!REG_P (ops[j])
|| REGNO (ops[j]) < FIRST_PSEUDO_REGISTER)
{
/* This op is a pseudo but the one it matches is not. */
/* If we can't put the other operand into a register, this
alternative can't be used. */
if (classes[j] == NO_REGS)
alt_fail = 1;
/* Otherwise, add to the cost of this alternative the cost
to copy the other operand to the register used for this
operand. */
else
alt_cost += copy_cost (ops[j], mode, classes[j], 1);
}
else
{
/* The costs of this operand are not the same as the other
operand since move costs are not symmetric. Moreover,
if we cannot tie them, this alternative needs to do a
copy, which is one instruction. */
struct costs *pp = &this_op_costs[i];
for (class = 0; class < N_REG_CLASSES; class++)
pp->cost[class]
= ((recog_data.operand_type[i] != OP_OUT
? may_move_in_cost[mode][class][(int) classes[i]]
: 0)
+ (recog_data.operand_type[i] != OP_IN
? may_move_out_cost[mode][(int) classes[i]][class]
: 0));
/* If the alternative actually allows memory, make things
a bit cheaper since we won't need an extra insn to
load it. */
pp->mem_cost
= ((recog_data.operand_type[i] != OP_IN
? MEMORY_MOVE_COST (mode, classes[i], 0)
: 0)
+ (recog_data.operand_type[i] != OP_OUT
? MEMORY_MOVE_COST (mode, classes[i], 1)
: 0) - allows_mem[i]);
/* If we have assigned a class to this register in our
first pass, add a cost to this alternative corresponding
to what we would add if this register were not in the
appropriate class. */
if (reg_pref)
alt_cost
+= (may_move_in_cost[mode]
[(unsigned char) reg_pref[REGNO (op)].prefclass]
[(int) classes[i]]);
if (REGNO (ops[i]) != REGNO (ops[j])
&& ! find_reg_note (insn, REG_DEAD, op))
alt_cost += 2;
/* This is in place of ordinary cost computation
for this operand, so skip to the end of the
alternative (should be just one character). */
while (*p && *p++ != ',')
;
constraints[i] = p;
continue;
}
}
/* Scan all the constraint letters. See if the operand matches
any of the constraints. Collect the valid register classes
and see if this operand accepts memory. */
while ((c = *p))
{
switch (c)
{
case ',':
break;
case '*':
/* Ignore the next letter for this pass. */
c = *++p;
break;
case '?':
alt_cost += 2;
case '!': case '#': case '&':
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
break;
case 'p':
allows_addr = 1;
win = address_operand (op, GET_MODE (op));
/* We know this operand is an address, so we want it to be
allocated to a register that can be the base of an
address, i.e. BASE_REG_CLASS. */
classes[i]
= reg_class_subunion[(int) classes[i]]
[(int) MODE_BASE_REG_CLASS (VOIDmode)];
break;
case 'm': case 'o': case 'V':
/* It doesn't seem worth distinguishing between offsettable
and non-offsettable addresses here. */
allows_mem[i] = 1;
if (MEM_P (op))
win = 1;
break;
case '<':
if (MEM_P (op)
&& (GET_CODE (XEXP (op, 0)) == PRE_DEC
|| GET_CODE (XEXP (op, 0)) == POST_DEC))
win = 1;
break;
case '>':
if (MEM_P (op)
&& (GET_CODE (XEXP (op, 0)) == PRE_INC
|| GET_CODE (XEXP (op, 0)) == POST_INC))
win = 1;
break;
case 'E':
case 'F':
if (GET_CODE (op) == CONST_DOUBLE
|| (GET_CODE (op) == CONST_VECTOR
&& (GET_MODE_CLASS (GET_MODE (op))
== MODE_VECTOR_FLOAT)))
win = 1;
break;
case 'G':
case 'H':
if (GET_CODE (op) == CONST_DOUBLE
&& CONST_DOUBLE_OK_FOR_CONSTRAINT_P (op, c, p))
win = 1;
break;
case 's':
if (GET_CODE (op) == CONST_INT
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
break;
case 'i':
if (CONSTANT_P (op)
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op)))
win = 1;
break;
case 'n':
if (GET_CODE (op) == CONST_INT
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
win = 1;
break;
case 'I':
case 'J':
case 'K':
case 'L':
case 'M':
case 'N':
case 'O':
case 'P':
if (GET_CODE (op) == CONST_INT
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), c, p))
win = 1;
break;
case 'X':
win = 1;
break;
case 'g':
if (MEM_P (op)
|| (CONSTANT_P (op)
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))))
win = 1;
allows_mem[i] = 1;
case 'r':
classes[i]
= reg_class_subunion[(int) classes[i]][(int) GENERAL_REGS];
break;
default:
if (REG_CLASS_FROM_CONSTRAINT (c, p) != NO_REGS)
classes[i]
= reg_class_subunion[(int) classes[i]]
[(int) REG_CLASS_FROM_CONSTRAINT (c, p)];
#ifdef EXTRA_CONSTRAINT_STR
else if (EXTRA_CONSTRAINT_STR (op, c, p))
win = 1;
if (EXTRA_MEMORY_CONSTRAINT (c, p))
{
/* Every MEM can be reloaded to fit. */
allows_mem[i] = 1;
if (MEM_P (op))
win = 1;
}
if (EXTRA_ADDRESS_CONSTRAINT (c, p))
{
/* Every address can be reloaded to fit. */
allows_addr = 1;
if (address_operand (op, GET_MODE (op)))
win = 1;
/* We know this operand is an address, so we want it to
be allocated to a register that can be the base of an
address, i.e. BASE_REG_CLASS. */
classes[i]
= reg_class_subunion[(int) classes[i]]
[(int) MODE_BASE_REG_CLASS (VOIDmode)];
}
#endif
break;
}
p += CONSTRAINT_LEN (c, p);
if (c == ',')
break;
}
constraints[i] = p;
/* How we account for this operand now depends on whether it is a
pseudo register or not. If it is, we first check if any
register classes are valid. If not, we ignore this alternative,
since we want to assume that all pseudos get allocated for
register preferencing. If some register class is valid, compute
the costs of moving the pseudo into that class. */
if (REG_P (op) && REGNO (op) >= FIRST_PSEUDO_REGISTER)
{
if (classes[i] == NO_REGS)
{
/* We must always fail if the operand is a REG, but
we did not find a suitable class.
Otherwise we may perform an uninitialized read
from this_op_costs after the `continue' statement
below. */
alt_fail = 1;
}
else
{
struct costs *pp = &this_op_costs[i];
for (class = 0; class < N_REG_CLASSES; class++)
pp->cost[class]
= ((recog_data.operand_type[i] != OP_OUT
? may_move_in_cost[mode][class][(int) classes[i]]
: 0)
+ (recog_data.operand_type[i] != OP_IN
? may_move_out_cost[mode][(int) classes[i]][class]
: 0));
/* If the alternative actually allows memory, make things
a bit cheaper since we won't need an extra insn to
load it. */
pp->mem_cost
= ((recog_data.operand_type[i] != OP_IN
? MEMORY_MOVE_COST (mode, classes[i], 0)
: 0)
+ (recog_data.operand_type[i] != OP_OUT
? MEMORY_MOVE_COST (mode, classes[i], 1)
: 0) - allows_mem[i]);
/* If we have assigned a class to this register in our
first pass, add a cost to this alternative corresponding
to what we would add if this register were not in the
appropriate class. */
if (reg_pref)
alt_cost
+= (may_move_in_cost[mode]
[(unsigned char) reg_pref[REGNO (op)].prefclass]
[(int) classes[i]]);
}
}
/* Otherwise, if this alternative wins, either because we
have already determined that or if we have a hard register of
the proper class, there is no cost for this alternative. */
else if (win
|| (REG_P (op)
&& reg_fits_class_p (op, classes[i], 0, GET_MODE (op))))
;
/* If registers are valid, the cost of this alternative includes
copying the object to and/or from a register. */
else if (classes[i] != NO_REGS)
{
if (recog_data.operand_type[i] != OP_OUT)
alt_cost += copy_cost (op, mode, classes[i], 1);
if (recog_data.operand_type[i] != OP_IN)
alt_cost += copy_cost (op, mode, classes[i], 0);
}
/* The only other way this alternative can be used is if this is a
constant that could be placed into memory. */
else if (CONSTANT_P (op) && (allows_addr || allows_mem[i]))
alt_cost += MEMORY_MOVE_COST (mode, classes[i], 1);
else
alt_fail = 1;
}
if (alt_fail)
continue;
/* Finally, update the costs with the information we've calculated
about this alternative. */
for (i = 0; i < n_ops; i++)
if (REG_P (ops[i])
&& REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER)
{
struct costs *pp = &op_costs[i], *qq = &this_op_costs[i];
int scale = 1 + (recog_data.operand_type[i] == OP_INOUT);
pp->mem_cost = MIN (pp->mem_cost,
(qq->mem_cost + alt_cost) * scale);
for (class = 0; class < N_REG_CLASSES; class++)
pp->cost[class] = MIN (pp->cost[class],
(qq->cost[class] + alt_cost) * scale);
}
}
/* If this insn is a single set copying operand 1 to operand 0
and one operand is a pseudo with the other a hard reg or a pseudo
that prefers a register that is in its own register class then
we may want to adjust the cost of that register class to -1.
Avoid the adjustment if the source does not die to avoid stressing of
register allocator by preferrencing two colliding registers into single
class.
Also avoid the adjustment if a copy between registers of the class
is expensive (ten times the cost of a default copy is considered
arbitrarily expensive). This avoids losing when the preferred class
is very expensive as the source of a copy instruction. */
if ((set = single_set (insn)) != 0
&& ops[0] == SET_DEST (set) && ops[1] == SET_SRC (set)
&& REG_P (ops[0]) && REG_P (ops[1])
&& find_regno_note (insn, REG_DEAD, REGNO (ops[1])))
for (i = 0; i <= 1; i++)
if (REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER)
{
unsigned int regno = REGNO (ops[!i]);
enum machine_mode mode = GET_MODE (ops[!i]);
int class;
unsigned int nr;
if (regno >= FIRST_PSEUDO_REGISTER && reg_pref != 0)
{
enum reg_class pref = reg_pref[regno].prefclass;
if ((reg_class_size[(unsigned char) pref]
== (unsigned) CLASS_MAX_NREGS (pref, mode))
&& REGISTER_MOVE_COST (mode, pref, pref) < 10 * 2)
op_costs[i].cost[(unsigned char) pref] = -1;
}
else if (regno < FIRST_PSEUDO_REGISTER)
for (class = 0; class < N_REG_CLASSES; class++)
if (TEST_HARD_REG_BIT (reg_class_contents[class], regno)
&& reg_class_size[class] == (unsigned) CLASS_MAX_NREGS (class, mode))
{
if (reg_class_size[class] == 1)
op_costs[i].cost[class] = -1;
else
{
for (nr = 0; nr < (unsigned) hard_regno_nregs[regno][mode]; nr++)
{
if (! TEST_HARD_REG_BIT (reg_class_contents[class],
regno + nr))
break;
}
if (nr == (unsigned) hard_regno_nregs[regno][mode])
op_costs[i].cost[class] = -1;
}
}
}
}
/* Compute the cost of loading X into (if TO_P is nonzero) or from (if
TO_P is zero) a register of class CLASS in mode MODE.
X must not be a pseudo. */
static int
copy_cost (rtx x, enum machine_mode mode ATTRIBUTE_UNUSED,
enum reg_class class, int to_p ATTRIBUTE_UNUSED)
{
#ifdef HAVE_SECONDARY_RELOADS
enum reg_class secondary_class = NO_REGS;
#endif
/* If X is a SCRATCH, there is actually nothing to move since we are
assuming optimal allocation. */
if (GET_CODE (x) == SCRATCH)
return 0;
/* Get the class we will actually use for a reload. */
class = PREFERRED_RELOAD_CLASS (x, class);
#ifdef HAVE_SECONDARY_RELOADS
/* If we need a secondary reload (we assume here that we are using
the secondary reload as an intermediate, not a scratch register), the
cost is that to load the input into the intermediate register, then
to copy them. We use a special value of TO_P to avoid recursion. */
#ifdef SECONDARY_INPUT_RELOAD_CLASS
if (to_p == 1)
secondary_class = SECONDARY_INPUT_RELOAD_CLASS (class, mode, x);
#endif
#ifdef SECONDARY_OUTPUT_RELOAD_CLASS
if (! to_p)
secondary_class = SECONDARY_OUTPUT_RELOAD_CLASS (class, mode, x);
#endif
if (secondary_class != NO_REGS)
return (move_cost[mode][(int) secondary_class][(int) class]
+ copy_cost (x, mode, secondary_class, 2));
#endif /* HAVE_SECONDARY_RELOADS */
/* For memory, use the memory move cost, for (hard) registers, use the
cost to move between the register classes, and use 2 for everything
else (constants). */
if (MEM_P (x) || class == NO_REGS)
return MEMORY_MOVE_COST (mode, class, to_p);
else if (REG_P (x))
return move_cost[mode][(int) REGNO_REG_CLASS (REGNO (x))][(int) class];
else
/* If this is a constant, we may eventually want to call rtx_cost here. */
return COSTS_N_INSNS (1);
}
/* Record the pseudo registers we must reload into hard registers
in a subexpression of a memory address, X.
CLASS is the class that the register needs to be in and is either
BASE_REG_CLASS or INDEX_REG_CLASS.
SCALE is twice the amount to multiply the cost by (it is twice so we
can represent half-cost adjustments). */
static void
record_address_regs (rtx x, enum reg_class class, int scale)
{
enum rtx_code code = GET_CODE (x);
switch (code)
{
case CONST_INT:
case CONST:
case CC0:
case PC:
case SYMBOL_REF:
case LABEL_REF:
return;
case PLUS:
/* When we have an address that is a sum,
we must determine whether registers are "base" or "index" regs.
If there is a sum of two registers, we must choose one to be
the "base". Luckily, we can use the REG_POINTER to make a good
choice most of the time. We only need to do this on machines
that can have two registers in an address and where the base
and index register classes are different.
??? This code used to set REGNO_POINTER_FLAG in some cases, but
that seems bogus since it should only be set when we are sure
the register is being used as a pointer. */
{
rtx arg0 = XEXP (x, 0);
rtx arg1 = XEXP (x, 1);
enum rtx_code code0 = GET_CODE (arg0);
enum rtx_code code1 = GET_CODE (arg1);
/* Look inside subregs. */
if (code0 == SUBREG)
arg0 = SUBREG_REG (arg0), code0 = GET_CODE (arg0);
if (code1 == SUBREG)
arg1 = SUBREG_REG (arg1), code1 = GET_CODE (arg1);
/* If this machine only allows one register per address, it must
be in the first operand. */
if (MAX_REGS_PER_ADDRESS == 1)
record_address_regs (arg0, class, scale);
/* If index and base registers are the same on this machine, just
record registers in any non-constant operands. We assume here,
as well as in the tests below, that all addresses are in
canonical form. */
else if (INDEX_REG_CLASS == MODE_BASE_REG_CLASS (VOIDmode))
{
record_address_regs (arg0, class, scale);
if (! CONSTANT_P (arg1))
record_address_regs (arg1, class, scale);
}
/* If the second operand is a constant integer, it doesn't change
what class the first operand must be. */
else if (code1 == CONST_INT || code1 == CONST_DOUBLE)
record_address_regs (arg0, class, scale);
/* If the second operand is a symbolic constant, the first operand
must be an index register. */
else if (code1 == SYMBOL_REF || code1 == CONST || code1 == LABEL_REF)
record_address_regs (arg0, INDEX_REG_CLASS, scale);
/* If both operands are registers but one is already a hard register
of index or reg-base class, give the other the class that the
hard register is not. */
else if (code0 == REG && code1 == REG
&& REGNO (arg0) < FIRST_PSEUDO_REGISTER
&& (REG_MODE_OK_FOR_REG_BASE_P (arg0, VOIDmode)
|| REG_OK_FOR_INDEX_P (arg0)))
record_address_regs (arg1,
REG_MODE_OK_FOR_REG_BASE_P (arg0, VOIDmode)
? INDEX_REG_CLASS
: MODE_BASE_REG_REG_CLASS (VOIDmode),
scale);
else if (code0 == REG && code1 == REG
&& REGNO (arg1) < FIRST_PSEUDO_REGISTER
&& (REG_MODE_OK_FOR_REG_BASE_P (arg1, VOIDmode)
|| REG_OK_FOR_INDEX_P (arg1)))
record_address_regs (arg0,
REG_MODE_OK_FOR_REG_BASE_P (arg1, VOIDmode)
? INDEX_REG_CLASS
: MODE_BASE_REG_REG_CLASS (VOIDmode),
scale);
/* If one operand is known to be a pointer, it must be the base
with the other operand the index. Likewise if the other operand
is a MULT. */
else if ((code0 == REG && REG_POINTER (arg0))
|| code1 == MULT)
{
record_address_regs (arg0, MODE_BASE_REG_REG_CLASS (VOIDmode),
scale);
record_address_regs (arg1, INDEX_REG_CLASS, scale);
}
else if ((code1 == REG && REG_POINTER (arg1))
|| code0 == MULT)
{
record_address_regs (arg0, INDEX_REG_CLASS, scale);
record_address_regs (arg1, MODE_BASE_REG_REG_CLASS (VOIDmode),
scale);
}
/* Otherwise, count equal chances that each might be a base
or index register. This case should be rare. */
else
{
record_address_regs (arg0, MODE_BASE_REG_REG_CLASS (VOIDmode),
scale / 2);
record_address_regs (arg0, INDEX_REG_CLASS, scale / 2);
record_address_regs (arg1, MODE_BASE_REG_REG_CLASS (VOIDmode),
scale / 2);
record_address_regs (arg1, INDEX_REG_CLASS, scale / 2);
}
}
break;
/* Double the importance of a pseudo register that is incremented
or decremented, since it would take two extra insns
if it ends up in the wrong place. */
case POST_MODIFY:
case PRE_MODIFY:
record_address_regs (XEXP (x, 0), MODE_BASE_REG_CLASS (VOIDmode),
2 * scale);
if (REG_P (XEXP (XEXP (x, 1), 1)))
record_address_regs (XEXP (XEXP (x, 1), 1),
INDEX_REG_CLASS, 2 * scale);
break;
case POST_INC:
case PRE_INC:
case POST_DEC:
case PRE_DEC:
/* Double the importance of a pseudo register that is incremented
or decremented, since it would take two extra insns
if it ends up in the wrong place. If the operand is a pseudo,
show it is being used in an INC_DEC context. */
#ifdef FORBIDDEN_INC_DEC_CLASSES
if (REG_P (XEXP (x, 0))
&& REGNO (XEXP (x, 0)) >= FIRST_PSEUDO_REGISTER)
in_inc_dec[REGNO (XEXP (x, 0))] = 1;
#endif
record_address_regs (XEXP (x, 0), class, 2 * scale);
break;
case REG:
{
struct costs *pp = &costs[REGNO (x)];
int i;
pp->mem_cost += (MEMORY_MOVE_COST (Pmode, class, 1) * scale) / 2;
for (i = 0; i < N_REG_CLASSES; i++)
pp->cost[i] += (may_move_in_cost[Pmode][i][(int) class] * scale) / 2;
}
break;
default:
{
const char *fmt = GET_RTX_FORMAT (code);
int i;
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
if (fmt[i] == 'e')
record_address_regs (XEXP (x, i), class, scale);
}
}
}
#ifdef FORBIDDEN_INC_DEC_CLASSES
/* Return 1 if REG is valid as an auto-increment memory reference
to an object of MODE. */
static int
auto_inc_dec_reg_p (rtx reg, enum machine_mode mode)
{
if (HAVE_POST_INCREMENT
&& memory_address_p (mode, gen_rtx_POST_INC (Pmode, reg)))
return 1;
if (HAVE_POST_DECREMENT
&& memory_address_p (mode, gen_rtx_POST_DEC (Pmode, reg)))
return 1;
if (HAVE_PRE_INCREMENT
&& memory_address_p (mode, gen_rtx_PRE_INC (Pmode, reg)))
return 1;
if (HAVE_PRE_DECREMENT
&& memory_address_p (mode, gen_rtx_PRE_DEC (Pmode, reg)))
return 1;
return 0;
}
#endif
static short *renumber;
static size_t regno_allocated;
static unsigned int reg_n_max;
/* Allocate enough space to hold NUM_REGS registers for the tables used for
reg_scan and flow_analysis that are indexed by the register number. If
NEW_P is nonzero, initialize all of the registers, otherwise only
initialize the new registers allocated. The same table is kept from
function to function, only reallocating it when we need more room. If
RENUMBER_P is nonzero, allocate the reg_renumber array also. */
void
allocate_reg_info (size_t num_regs, int new_p, int renumber_p)
{
size_t size_info;
size_t size_renumber;
size_t min = (new_p) ? 0 : reg_n_max;
struct reg_info_data *reg_data;
if (num_regs > regno_allocated)
{
size_t old_allocated = regno_allocated;
regno_allocated = num_regs + (num_regs / 20); /* Add some slop space. */
size_renumber = regno_allocated * sizeof (short);
if (!reg_n_info)
{
VARRAY_REG_INIT (reg_n_info, regno_allocated, "reg_n_info");
renumber = xmalloc (size_renumber);
reg_pref_buffer = xmalloc (regno_allocated
* sizeof (struct reg_pref));
}
else
{
VARRAY_GROW (reg_n_info, regno_allocated);
if (new_p) /* If we're zapping everything, no need to realloc. */
{
free ((char *) renumber);
free ((char *) reg_pref);
renumber = xmalloc (size_renumber);
reg_pref_buffer = xmalloc (regno_allocated
* sizeof (struct reg_pref));
}
else
{
renumber = xrealloc (renumber, size_renumber);
reg_pref_buffer = xrealloc (reg_pref_buffer,
regno_allocated
* sizeof (struct reg_pref));
}
}
size_info = (regno_allocated - old_allocated) * sizeof (reg_info)
+ sizeof (struct reg_info_data) - sizeof (reg_info);
reg_data = xcalloc (size_info, 1);
reg_data->min_index = old_allocated;
reg_data->max_index = regno_allocated - 1;
reg_data->next = reg_info_head;
reg_info_head = reg_data;
}
reg_n_max = num_regs;
if (min < num_regs)
{
/* Loop through each of the segments allocated for the actual
reg_info pages, and set up the pointers, zero the pages, etc. */
for (reg_data = reg_info_head;
reg_data && reg_data->max_index >= min;
reg_data = reg_data->next)
{
size_t min_index = reg_data->min_index;
size_t max_index = reg_data->max_index;
size_t max = MIN (max_index, num_regs);
size_t local_min = min - min_index;
size_t i;
if (reg_data->min_index > num_regs)
continue;
if (min < min_index)
local_min = 0;
if (!reg_data->used_p) /* page just allocated with calloc */
reg_data->used_p = 1; /* no need to zero */
else
memset (&reg_data->data[local_min], 0,
sizeof (reg_info) * (max - min_index - local_min + 1));
for (i = min_index+local_min; i <= max; i++)
{
VARRAY_REG (reg_n_info, i) = &reg_data->data[i-min_index];
REG_BASIC_BLOCK (i) = REG_BLOCK_UNKNOWN;
renumber[i] = -1;
reg_pref_buffer[i].prefclass = (char) NO_REGS;
reg_pref_buffer[i].altclass = (char) NO_REGS;
}
}
}
/* If {pref,alt}class have already been allocated, update the pointers to
the newly realloced ones. */
if (reg_pref)
reg_pref = reg_pref_buffer;
if (renumber_p)
reg_renumber = renumber;
}
/* Free up the space allocated by allocate_reg_info. */
void
free_reg_info (void)
{
if (reg_n_info)
{
struct reg_info_data *reg_data;
struct reg_info_data *reg_next;
VARRAY_FREE (reg_n_info);
for (reg_data = reg_info_head; reg_data; reg_data = reg_next)
{
reg_next = reg_data->next;
free ((char *) reg_data);
}
free (reg_pref_buffer);
reg_pref_buffer = (struct reg_pref *) 0;
reg_info_head = (struct reg_info_data *) 0;
renumber = (short *) 0;
}
regno_allocated = 0;
reg_n_max = 0;
}
/* This is the `regscan' pass of the compiler, run just before cse
and again just before loop.
It finds the first and last use of each pseudo-register
and records them in the vectors regno_first_uid, regno_last_uid
and counts the number of sets in the vector reg_n_sets.
REPEAT is nonzero the second time this is called. */
/* Maximum number of parallel sets and clobbers in any insn in this fn.
Always at least 3, since the combiner could put that many together
and we want this to remain correct for all the remaining passes.
This corresponds to the maximum number of times note_stores will call
a function for any insn. */
int max_parallel;
/* Used as a temporary to record the largest number of registers in
PARALLEL in a SET_DEST. This is added to max_parallel. */
static int max_set_parallel;
void
reg_scan (rtx f, unsigned int nregs)
{
rtx insn;
timevar_push (TV_REG_SCAN);
allocate_reg_info (nregs, TRUE, FALSE);
max_parallel = 3;
max_set_parallel = 0;
for (insn = f; insn; insn = NEXT_INSN (insn))
if (INSN_P (insn))
{
rtx pat = PATTERN (insn);
if (GET_CODE (pat) == PARALLEL
&& XVECLEN (pat, 0) > max_parallel)
max_parallel = XVECLEN (pat, 0);
reg_scan_mark_refs (pat, insn, 0, 0);
if (REG_NOTES (insn))
reg_scan_mark_refs (REG_NOTES (insn), insn, 1, 0);
}
max_parallel += max_set_parallel;
timevar_pop (TV_REG_SCAN);
}
/* Update 'regscan' information by looking at the insns
from FIRST to LAST. Some new REGs have been created,
and any REG with number greater than OLD_MAX_REGNO is
such a REG. We only update information for those. */
void
reg_scan_update (rtx first, rtx last, unsigned int old_max_regno)
{
rtx insn;
allocate_reg_info (max_reg_num (), FALSE, FALSE);
for (insn = first; insn != last; insn = NEXT_INSN (insn))
if (INSN_P (insn))
{
rtx pat = PATTERN (insn);
if (GET_CODE (pat) == PARALLEL
&& XVECLEN (pat, 0) > max_parallel)
max_parallel = XVECLEN (pat, 0);
reg_scan_mark_refs (pat, insn, 0, old_max_regno);
if (REG_NOTES (insn))
reg_scan_mark_refs (REG_NOTES (insn), insn, 1, old_max_regno);
}
}
/* X is the expression to scan. INSN is the insn it appears in.
NOTE_FLAG is nonzero if X is from INSN's notes rather than its body.
We should only record information for REGs with numbers
greater than or equal to MIN_REGNO. */
static void
reg_scan_mark_refs (rtx x, rtx insn, int note_flag, unsigned int min_regno)
{
enum rtx_code code;
rtx dest;
rtx note;
if (!x)
return;
code = GET_CODE (x);
switch (code)
{
case CONST:
case CONST_INT:
case CONST_DOUBLE:
case CONST_VECTOR:
case CC0:
case PC:
case SYMBOL_REF:
case LABEL_REF:
case ADDR_VEC:
case ADDR_DIFF_VEC:
return;
case REG:
{
unsigned int regno = REGNO (x);
if (regno >= min_regno)
{
if (!note_flag)
REGNO_LAST_UID (regno) = INSN_UID (insn);
if (REGNO_FIRST_UID (regno) == 0)
REGNO_FIRST_UID (regno) = INSN_UID (insn);
/* If we are called by reg_scan_update() (indicated by min_regno
being set), we also need to update the reference count. */
if (min_regno)
REG_N_REFS (regno)++;
}
}
break;
case EXPR_LIST:
if (XEXP (x, 0))
reg_scan_mark_refs (XEXP (x, 0), insn, note_flag, min_regno);
if (XEXP (x, 1))
reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno);
break;
case INSN_LIST:
if (XEXP (x, 1))
reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno);
break;
case CLOBBER:
{
rtx reg = XEXP (x, 0);
if (REG_P (reg)
&& REGNO (reg) >= min_regno)
{
REG_N_SETS (REGNO (reg))++;
REG_N_REFS (REGNO (reg))++;
}
else if (MEM_P (reg))
reg_scan_mark_refs (XEXP (reg, 0), insn, note_flag, min_regno);
}
break;
case SET:
/* Count a set of the destination if it is a register. */
for (dest = SET_DEST (x);
GET_CODE (dest) == SUBREG || GET_CODE (dest) == STRICT_LOW_PART
|| GET_CODE (dest) == ZERO_EXTEND;
dest = XEXP (dest, 0))
;
/* For a PARALLEL, record the number of things (less the usual one for a
SET) that are set. */
if (GET_CODE (dest) == PARALLEL)
max_set_parallel = MAX (max_set_parallel, XVECLEN (dest, 0) - 1);
if (REG_P (dest)
&& REGNO (dest) >= min_regno)
{
REG_N_SETS (REGNO (dest))++;
REG_N_REFS (REGNO (dest))++;
}
/* If this is setting a pseudo from another pseudo or the sum of a
pseudo and a constant integer and the other pseudo is known to be
a pointer, set the destination to be a pointer as well.
Likewise if it is setting the destination from an address or from a
value equivalent to an address or to the sum of an address and
something else.
But don't do any of this if the pseudo corresponds to a user
variable since it should have already been set as a pointer based
on the type. */
if (REG_P (SET_DEST (x))
&& REGNO (SET_DEST (x)) >= FIRST_PSEUDO_REGISTER
&& REGNO (SET_DEST (x)) >= min_regno
/* If the destination pseudo is set more than once, then other
sets might not be to a pointer value (consider access to a
union in two threads of control in the presence of global
optimizations). So only set REG_POINTER on the destination
pseudo if this is the only set of that pseudo. */
&& REG_N_SETS (REGNO (SET_DEST (x))) == 1
&& ! REG_USERVAR_P (SET_DEST (x))
&& ! REG_POINTER (SET_DEST (x))
&& ((REG_P (SET_SRC (x))
&& REG_POINTER (SET_SRC (x)))
|| ((GET_CODE (SET_SRC (x)) == PLUS
|| GET_CODE (SET_SRC (x)) == LO_SUM)
&& GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
&& REG_P (XEXP (SET_SRC (x), 0))
&& REG_POINTER (XEXP (SET_SRC (x), 0)))
|| GET_CODE (SET_SRC (x)) == CONST
|| GET_CODE (SET_SRC (x)) == SYMBOL_REF
|| GET_CODE (SET_SRC (x)) == LABEL_REF
|| (GET_CODE (SET_SRC (x)) == HIGH
&& (GET_CODE (XEXP (SET_SRC (x), 0)) == CONST
|| GET_CODE (XEXP (SET_SRC (x), 0)) == SYMBOL_REF
|| GET_CODE (XEXP (SET_SRC (x), 0)) == LABEL_REF))
|| ((GET_CODE (SET_SRC (x)) == PLUS
|| GET_CODE (SET_SRC (x)) == LO_SUM)
&& (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST
|| GET_CODE (XEXP (SET_SRC (x), 1)) == SYMBOL_REF
|| GET_CODE (XEXP (SET_SRC (x), 1)) == LABEL_REF))
|| ((note = find_reg_note (insn, REG_EQUAL, 0)) != 0
&& (GET_CODE (XEXP (note, 0)) == CONST
|| GET_CODE (XEXP (note, 0)) == SYMBOL_REF
|| GET_CODE (XEXP (note, 0)) == LABEL_REF))))
REG_POINTER (SET_DEST (x)) = 1;
/* If this is setting a register from a register or from a simple
conversion of a register, propagate REG_EXPR. */
if (REG_P (dest))
{
rtx src = SET_SRC (x);
while (GET_CODE (src) == SIGN_EXTEND
|| GET_CODE (src) == ZERO_EXTEND
|| GET_CODE (src) == TRUNCATE
|| (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)))
src = XEXP (src, 0);
if (!REG_ATTRS (dest) && REG_P (src))
REG_ATTRS (dest) = REG_ATTRS (src);
if (!REG_ATTRS (dest) && MEM_P (src))
set_reg_attrs_from_mem (dest, src);
}
/* ... fall through ... */
default:
{
const char *fmt = GET_RTX_FORMAT (code);
int i;
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
if (fmt[i] == 'e')
reg_scan_mark_refs (XEXP (x, i), insn, note_flag, min_regno);
else if (fmt[i] == 'E' && XVEC (x, i) != 0)
{
int j;
for (j = XVECLEN (x, i) - 1; j >= 0; j--)
reg_scan_mark_refs (XVECEXP (x, i, j), insn, note_flag, min_regno);
}
}
}
}
}
/* Return nonzero if C1 is a subset of C2, i.e., if every register in C1
is also in C2. */
int
reg_class_subset_p (enum reg_class c1, enum reg_class c2)
{
if (c1 == c2) return 1;
if (c2 == ALL_REGS)
win:
return 1;
GO_IF_HARD_REG_SUBSET (reg_class_contents[(int) c1],
reg_class_contents[(int) c2],
win);
return 0;
}
/* Return nonzero if there is a register that is in both C1 and C2. */
int
reg_classes_intersect_p (enum reg_class c1, enum reg_class c2)
{
HARD_REG_SET c;
if (c1 == c2) return 1;
if (c1 == ALL_REGS || c2 == ALL_REGS)
return 1;
COPY_HARD_REG_SET (c, reg_class_contents[(int) c1]);
AND_HARD_REG_SET (c, reg_class_contents[(int) c2]);
GO_IF_HARD_REG_SUBSET (c, reg_class_contents[(int) NO_REGS], lose);
return 1;
lose:
return 0;
}
#ifdef CANNOT_CHANGE_MODE_CLASS
struct subregs_of_mode_node
{
unsigned int block;
unsigned char modes[MAX_MACHINE_MODE];
};
static htab_t subregs_of_mode;
static hashval_t
som_hash (const void *x)
{
const struct subregs_of_mode_node *a = x;
return a->block;
}
static int
som_eq (const void *x, const void *y)
{
const struct subregs_of_mode_node *a = x;
const struct subregs_of_mode_node *b = y;
return a->block == b->block;
}
void
init_subregs_of_mode (void)
{
if (subregs_of_mode)
htab_empty (subregs_of_mode);
else
subregs_of_mode = htab_create (100, som_hash, som_eq, free);
}
void
record_subregs_of_mode (rtx subreg)
{
struct subregs_of_mode_node dummy, *node;
enum machine_mode mode;
unsigned int regno;
void **slot;
if (!REG_P (SUBREG_REG (subreg)))
return;
regno = REGNO (SUBREG_REG (subreg));
mode = GET_MODE (subreg);
if (regno < FIRST_PSEUDO_REGISTER)
return;
dummy.block = regno & -8;
slot = htab_find_slot_with_hash (subregs_of_mode, &dummy,
dummy.block, INSERT);
node = *slot;
if (node == NULL)
{
node = xcalloc (1, sizeof (*node));
node->block = regno & -8;
*slot = node;
}
node->modes[mode] |= 1 << (regno & 7);
}
/* Set bits in *USED which correspond to registers which can't change
their mode from FROM to any mode in which REGNO was encountered. */
void
cannot_change_mode_set_regs (HARD_REG_SET *used, enum machine_mode from,
unsigned int regno)
{
struct subregs_of_mode_node dummy, *node;
enum machine_mode to;
unsigned char mask;
unsigned int i;
dummy.block = regno & -8;
node = htab_find_with_hash (subregs_of_mode, &dummy, dummy.block);
if (node == NULL)
return;
mask = 1 << (regno & 7);
for (to = VOIDmode; to < NUM_MACHINE_MODES; to++)
if (node->modes[to] & mask)
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (!TEST_HARD_REG_BIT (*used, i)
&& REG_CANNOT_CHANGE_MODE_P (i, from, to))
SET_HARD_REG_BIT (*used, i);
}
/* Return 1 if REGNO has had an invalid mode change in CLASS from FROM
mode. */
bool
invalid_mode_change_p (unsigned int regno, enum reg_class class,
enum machine_mode from)
{
struct subregs_of_mode_node dummy, *node;
enum machine_mode to;
unsigned char mask;
dummy.block = regno & -8;
node = htab_find_with_hash (subregs_of_mode, &dummy, dummy.block);
if (node == NULL)
return false;
mask = 1 << (regno & 7);
for (to = VOIDmode; to < NUM_MACHINE_MODES; to++)
if (node->modes[to] & mask)
if (CANNOT_CHANGE_MODE_CLASS (from, to, class))
return true;
return false;
}
#endif /* CANNOT_CHANGE_MODE_CLASS */
#include "gt-regclass.h"
Reference in New Issue View Git Blame Copy Permalink