gcc/boehm-gc/Makefile.direct

686 lines
33 KiB
Makefile

# This is the original manually generated Makefile. It may still be used
# to build the collector.
#
# Primary targets:
# gc.a - builds basic library
# c++ - adds C++ interface to library
# cords - adds cords (heavyweight strings) to library
# test - prints porting information, then builds basic version of gc.a,
# and runs some tests of collector and cords. Does not add cords or
# c++ interface to gc.a
# cord/de - builds dumb editor based on cords.
ABI_FLAG=
# ABI_FLAG should be the cc flag that specifies the ABI. On most
# platforms this will be the empty string. Possible values:
# +DD64 for 64-bit executable on HP/UX.
# -n32, -n64, -o32 for SGI/MIPS ABIs.
AS_ABI_FLAG=$(ABI_FLAG)
# ABI flag for assembler. On HP/UX this is +A64 for 64 bit
# executables.
CC=cc $(ABI_FLAG)
CXX=g++ $(ABI_FLAG)
AS=as $(AS_ABI_FLAG)
# The above doesn't work with gas, which doesn't run cpp.
# Define AS as `gcc -c -x assembler-with-cpp' instead.
# Redefining srcdir allows object code for the nonPCR version of the collector
# to be generated in different directories.
srcdir= .
VPATH= $(srcdir)
CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
# To build the parallel collector on Linux, add to the above:
# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
# To build the parallel collector in a static library on HP/UX,
# add to the above:
# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -D_POSIX_C_SOURCE=199506L -mt
# To build the thread-safe collector on Tru64, add to the above:
# -pthread -DGC_OSF1_THREADS
# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
# part of the build process, i.e. on the build machine. These will usually
# be the same as CC and CFLAGS, except in a cross-compilation environment.
# Note that HOSTCFLAGS should include any -D flags that affect thread support.
HOSTCC=$(CC)
HOSTCFLAGS=$(CFLAGS)
# For dynamic library builds, it may be necessary to add flags to generate
# PIC code, e.g. -fPIC on Linux.
# Setjmp_test may yield overly optimistic results when compiled
# without optimization.
# These define arguments influence the collector configuration:
# -DSILENT disables statistics printing, and improves performance.
# -DFIND_LEAK causes GC_find_leak to be initially set.
# This causes the collector to assume that all inaccessible
# objects should have been explicitly deallocated, and reports exceptions.
# Finalization and the test program are not usable in this mode.
# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
# (Clients should also define GC_SOLARIS_THREADS and then include
# gc.h before performing thr_ or dl* or GC_ operations.)
# Must also define -D_REENTRANT.
# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
# (Internally this define GC_SOLARIS_THREADS as well.)
# -DGC_IRIX_THREADS enables support for Irix pthreads. See README.irix.
# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
# Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
# see README.linux. -D_REENTRANT may also be required.
# -DGC_OSF1_THREADS enables support for Tru64 pthreads.
# -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads.
# Appeared to run into some underlying thread problems.
# -DGC_DARWIN_THREADS enables support for Mac OS X pthreads.
# -DGC_AIX_THREADS enables support for IBM AIX threads.
# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.
# See README.DGUX386.
# -DGC_WIN32_THREADS enables support for win32 threads. That makes sense
# for this Makefile only under Cygwin.
# -DGC_THREADS should set the appropriate one of the above macros.
# It assumes pthreads for Solaris.
# -DALL_INTERIOR_POINTERS allows all pointers to the interior
# of objects to be recognized. (See gc_priv.h for consequences.)
# Alternatively, GC_all_interior_pointers can be set at process
# initialization time.
# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
# usually causing it to use less space in such situations.
# Incremental collection no longer works in this case.
# -DLARGE_CONFIG tunes the collector for unusually large heaps.
# Necessary for heaps larger than about 500 MB on most machines.
# Recommended for heaps larger than about 64 MB.
# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
# GC_all_interior_pointers = 1. Normally -DALL_INTERIOR_POINTERS
# causes all objects to be padded so that pointers just past the end of
# an object can be recognized. This can be expensive. (The padding
# is normally more than one byte due to alignment constraints.)
# -DDONT_ADD_BYTE_AT_END disables the padding.
# -DNO_SIGNALS does not disable signals during critical parts of
# the GC process. This is no less correct than many malloc
# implementations, and it sometimes has a significant performance
# impact. However, it is dangerous for many not-quite-ANSI C
# programs that call things like printf in asynchronous signal handlers.
# This is on by default. Turning it off has not been extensively tested with
# compilers that reorder stores. It should have been.
# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
# have execute permission, i.e. it may be impossible to execute
# code from the heap. Currently this only affects the incremental
# collector on UNIX machines. It may greatly improve its performance,
# since this may avoid some expensive cache synchronization.
# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
# the new syntax "operator new[]" for allocating and deleting arrays.
# See gc_cpp.h for details. No effect on the C part of the collector.
# This is defined implicitly in a few environments. Must also be defined
# by clients that use gc_cpp.h.
# -DREDIRECT_MALLOC=X causes malloc to be defined as alias for X.
# Unless the following macros are defined, realloc is also redirected
# to GC_realloc, and free is redirected to GC_free.
# Calloc and strdup are redefined in terms of the new malloc. X should
# be either GC_malloc or GC_malloc_uncollectable, or
# GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc
# with dummy source location information, but still results in
# properly remembered call stacks on Linux/X86 and Solaris/SPARC.
# It requires that the following two macros also be used.)
# The former is occasionally useful for working around leaks in code
# you don't want to (or can't) look at. It may not work for
# existing code, but it often does. Neither works on all platforms,
# since some ports use malloc or calloc to obtain system memory.
# (Probably works for UNIX, and win32.) If you build with DBG_HDRS_ALL,
# you should only use GC_debug_malloc_replacement as a malloc
# replacement.
# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
# The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
# together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
# generate leak reports with call stacks for both malloc and realloc.
# This also requires the following:
# -DREDIRECT_FREE=X causes free to be redirected to X. The
# canonical use is -DREDIRECT_FREE=GC_debug_free.
# -DIGNORE_FREE turns calls to free into a noop. Only useful with
# -DREDIRECT_MALLOC.
# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
# Reduces code size slightly at the expense of debuggability.
# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
# order by specifying a nonstandard finalization mark procedure (see
# finalize.c). Objects reachable from finalizable objects will be marked
# in a sepearte postpass, and hence their memory won't be reclaimed.
# Not recommended unless you are implementing a language that specifies
# these semantics. Since 5.0, determines only only the initial value
# of GC_java_finalization variable.
# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
# to explicit GC_invoke_finalizers() calls.
# In 5.0 this became runtime adjustable, and this only determines the
# initial value of GC_finalize_on_demand.
# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
# This is useful if either the vendor malloc implementation is poor,
# or if REDIRECT_MALLOC is used.
# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
# sets the heap block size. Each heap block is devoted to a single size and
# kind of object. For the incremental collector it makes sense to match
# the most likely page size. Otherwise large values result in more
# fragmentation, but generally better performance for large heaps.
# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
# Works for Solaris and Irix.
# -DUSE_MUNMAP causes memory to be returned to the OS under the right
# circumstances. This currently disables VM-based incremental collection.
# This is currently experimental, and works only under some Unix,
# Linux and Windows versions.
# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
# GC_scratch_alloc() to get stack memory.
# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
# the garbage collector detects a value that looks almost, but not quite,
# like a pointer, print both the address containing the value, and the
# value of the near-bogus-pointer. Can be used to identifiy regions of
# memory that are likely to contribute misidentified pointers.
# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
# for objects allocated with the debugging allocator. If all objects
# through GC_MALLOC with GC_DEBUG defined, this allows the client
# to determine how particular or randomly chosen objects are reachable
# for debugging/profiling purposes. The gc_backptr.h interface is
# implemented only if this is defined.
# -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently
# this facility is only used in a few places. It is intended primarily
# for debugging of the garbage collector itself, but could also
# -DDBG_HDRS_ALL Make sure that all objects have debug headers. Increases
# the reliability (from 99.9999% to 100% mod. bugs) of some of the debugging
# code (especially KEEP_BACK_PTRS). Makes -DSHORT_DBG_HDRS possible.
# Assumes that all client allocation is done through debugging
# allocators.
# -DSHORT_DBG_HDRS Assume that all objects have debug headers. Shorten
# the headers to minimize object size, at the expense of checking for
# writes past the end of an object. This is intended for environments
# in which most client code is written in a "safe" language, such as
# Scheme or Java. Assumes that all client allocation is done using
# the GC_debug_ functions, or through the macros that expand to these,
# or by redirecting malloc to GC_debug_malloc_replacement.
# (Also eliminates the field for the requested object size.)
# occasionally be useful for debugging of client code. Slows down the
# collector somewhat, but not drastically.
# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
# allocated through the debugging interface. Affects the amount of
# information generated in leak reports. Only matters on platforms
# on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
# and Solaris/SPARC and platforms that provide execinfo.h.
# Default is zero. On X86, client
# code should NOT be compiled with -fomit-frame-pointer.
# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be
# saved with each call frame. Default is zero. Ignored if we
# don't know how to retrieve arguments on the platform.
# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
# altered stubborn objects, at substantial performance cost.
# Use only for debugging of the incremental collector.
# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
# that include a pointer to a type descriptor in each allocated object).
# Building this way requires an ANSI C compiler.
# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
# prefetch instructions. No effect except on X86 Linux platforms.
# Assumes a very recent gcc-compatible compiler and assembler.
# (Gas prefetcht0 support was added around May 1999.)
# Empirically the code appears to still run correctly on Pentium II
# processors, though with no performance benefit. May not run on other
# X86 processors? In some cases this improves performance by
# 15% or so.
# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
# prefetch instructions. Same restrictions as USE_I686_PREFETCH.
# Minimally tested. Didn't appear to be an obvious win on a K6-2/500.
# -DUSE_PPC_PREFETCH causes the collector to issue PowerPC style
# prefetch instructions. No effect except on PowerPC OS X platforms.
# Performance impact untested.
# -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux
# causes the collector some system and pthread calls in a more transparent
# fashion than the usual macro-based approach. Requires GNU ld, and
# currently probably works only with Linux.
# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
# and GC_local_gcj_malloc(). Needed for gc_gcj.h interface. These allocate
# in a way that usually does not involve acquisition of a global lock.
# Currently works only on platforms such as Linux which use pthread_support.c.
# Recommended for multiprocessors.
# -DUSE_COMPILER_TLS causes thread local allocation to use compiler-supported
# "__thread" thread-local variables. This is the default in HP/UX. It
# may help performance on recent Linux installations. (It failed for
# me on RedHat 8, but appears to work on RedHat 9.)
# -DPARALLEL_MARK allows the marker to run in multiple threads. Recommended
# for multiprocessors. Currently requires Linux on X86 or IA64, though
# support for other Posix platforms should be fairly easy to add,
# if the thread implementation is otherwise supported.
# -DNO_GETENV prevents the collector from looking at environment variables.
# These may otherwise alter its configuration, or turn off GC altogether.
# I don't know of a reason to disable this, except possibly if the
# resulting process runs as a privileged user?
# -DUSE_GLOBAL_ALLOC. Win32 only. Use GlobalAlloc instead of
# VirtualAlloc to allocate the heap. May be needed to work around
# a Windows NT/2000 issue. Incompatible with USE_MUNMAP.
# See README.win32 for details.
# -DMAKE_BACK_GRAPH. Enable GC_PRINT_BACK_HEIGHT environment variable.
# See README.environment for details. Experimental. Limited platform
# support. Implies DBG_HDRS_ALL. All allocation should be done using
# the debug interface.
# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
# makes incremental collection easier. Was enabled by default until 6.0.
# Rarely used, to my knowledge.
# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed
# from a multithreaded parent. Currently only supported by pthread_support.c.
# (Similar code should work on Solaris or Irix, but it hasn't been tried.)
# -DTEST_WITH_SYSTEM_MALLOC causes gctest to allocate (and leak) large chunks
# of memory with the standard system malloc. This will cause the root
# set and collected heap to grow significantly if malloced memory is
# somehow getting traced by the collector. This has no impact on the
# generated library; it only affects the test.
# -DPOINTER_MASK=0x... causes candidate pointers to be ANDed with the
# given mask before being considered. If either this or the following
# macro is defined, it will be assumed that all pointers stored in
# the heap need to be processed this way. Stack and register pointers
# will be considered both with and without processing.
# These macros are normally needed only to support systems that use
# high-order pointer tags. EXPERIMENTAL.
# -DPOINTER_SHIFT=n causes the collector to left shift candidate pointers
# by the indicated amount before trying to interpret them. Applied
# after POINTER_MASK. EXPERIMENTAL. See also the preceding macro.
# -DDARWIN_DONT_PARSE_STACK Causes the Darwin port to discover thread
# stack bounds in the same way as other pthread ports, without trying to
# walk the frames onthe stack. This is recommended only as a fallback
# for applications that don't support proper stack unwinding.
#
CXXFLAGS= $(CFLAGS)
AR= ar
RANLIB= ranlib
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o pthread_support.o pthread_stop_world.o darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o win32_threads.o
CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c pthread_support.c pthread_stop_world.c darwin_stop_world.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c win32_threads.c
CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.S \
sparc_mach_dep.S include/gc.h include/gc_typed.h \
include/private/gc_hdrs.h include/private/gc_priv.h \
include/private/gcconfig.h include/private/gc_pmark.h \
include/gc_inl.h include/gc_inline.h include/gc_mark.h \
threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
gcname.c include/weakpointer.h include/private/gc_locks.h \
gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
include/new_gc_alloc.h include/gc_allocator.h \
include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
include/private/solaris_threads.h include/gc_backptr.h \
hpux_test_and_clear.s include/gc_gcj.h \
include/gc_local_alloc.h include/private/dbg_mlc.h \
include/private/specific.h powerpc_darwin_mach_dep.s \
include/leak_detector.h include/gc_amiga_redirects.h \
include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
include/gc_config_macros.h include/private/pthread_support.h \
include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
include/private/darwin_stop_world.h $(CORD_SRCS)
DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
doc/README.amiga doc/README.cords doc/debugging.html \
doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
doc/README.sgi doc/README.solaris2 doc/README.uts \
doc/README.win32 doc/barrett_diagram doc/README \
doc/README.contributors doc/README.changes doc/gc.man \
doc/README.environment doc/tree.html doc/gcdescr.html \
doc/README.autoconf doc/README.macros doc/README.ews4800 \
doc/README.DGUX386 doc/README.arm.cross doc/leak.html \
doc/scale.html doc/gcinterface.html doc/README.darwin \
doc/simple_example.html
TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
tests/leak_test.c tests/thread_leak_test.c tests/middle.c
GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
libtool.m4 install-sh configure.host Makefile.in \
aclocal.m4 config.sub config.guess \
include/Makefile.am include/Makefile.in \
doc/Makefile.am doc/Makefile.in \
ltmain.sh mkinstalldirs depcomp missing
OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
PCR-Makefile SMakefile.amiga Makefile.DLLs \
digimars.mak Makefile.direct NT_STATIC_THREADS_MAKEFILE
# Makefile and Makefile.direct are copies of each other.
OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes \
MacProjects.sit.hqx MacOS.c \
Mac_files/datastart.c Mac_files/dataend.c \
Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
add_gc_prefix.c gc_cpp.cpp \
version.h AmigaOS.c \
$(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
UTILS= if_mach if_not_there threadlibs
# Libraries needed for curses applications. Only needed for de.
CURSES= -lcurses -ltermlib
# The following is irrelevant on most systems. But a few
# versions of make otherwise fork the shell specified in
# the SHELL environment variable.
SHELL= /bin/sh
SPECIALCFLAGS = -I$(srcdir)/include
# Alternative flags to the C compiler for mach_dep.c.
# Mach_dep.c often doesn't like optimization, and it's
# not time-critical anyway.
# Set SPECIALCFLAGS to -q nodirect_code on Encore.
all: gc.a gctest
LEAKFLAGS=$(CFLAGS) -DFIND_LEAK
BSD-pkg-all: bsd-libgc.a bsd-libleak.a
bsd-libgc.a:
$(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
mv gc.a bsd-libgc.a
bsd-libleak.a:
$(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
mv gc.a bsd-libleak.a
BSD-pkg-install: BSD-pkg-all
${CP} bsd-libgc.a libgc.a
${INSTALL_DATA} libgc.a ${PREFIX}/lib
${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3
pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
mach_dep.o $(SRCS)
$(MAKE) -f PCR-Makefile depend
$(MAKE) -f PCR-Makefile
$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
$(srcdir)/include/private/gc_priv.h \
$(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
$(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
$(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
$(srcdir)/include/gc_config_macros.h Makefile
# The dependency on Makefile is needed. Changing
# options such as -DSILENT affects the size of GC_arrays,
# invalidating all .o files that rely on gc_priv.h
mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
specific.o pthread_support.o: $(srcdir)/include/private/specific.h
solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
tests/test.o: tests $(srcdir)/tests/test.c
$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
mv test.o tests/test.o
tests:
mkdir tests
base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
echo > base_lib
rm -f dont_ar_1
./if_mach SPARC SUNOS5 touch dont_ar_1
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
./if_mach M68K AMIGA touch dont_ar_1
./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
# ignore ranlib failure; that usually means it doesn't exist, and isn't needed
cords: $(CORD_OBJS) cord/cordtest $(UTILS)
rm -f dont_ar_3
./if_mach SPARC SUNOS5 touch dont_ar_3
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
./if_mach M68K AMIGA touch dont_ar_3
./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
base_lib $(UTILS)
rm -f test_cpp
./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
c++-t: c++
./test_cpp 1
c++-nt: c++
@echo "Use ./test_cpp 1 to test the leak library"
c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
rm -f dont_ar_4
./if_mach SPARC SUNOS5 touch dont_ar_4
./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
./if_mach M68K AMIGA touch dont_ar_4
./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
./test_cpp 1
echo > c++
dyn_load_sunos53.o: dyn_load.c
$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
# SunOS5 shared library version of the collector
sunos5gc.so: $(OBJS) dyn_load_sunos53.o
$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
ln sunos5gc.so libgc.so
# Alpha/OSF shared library version of the collector
libalphagc.so: $(OBJS)
ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
ln libalphagc.so libgc.so
# IRIX shared library version of the collector
libirixgc.so: $(OBJS) dyn_load.o
ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
ln libirixgc.so libgc.so
# Linux shared library version of the collector
liblinuxgc.so: $(OBJS) dyn_load.o
gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
ln liblinuxgc.so libgc.so
# Alternative Linux rule. This is preferable, but is likely to break the
# Makefile for some non-linux platforms.
# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
#
#.SUFFIXES: .lo $(SUFFIXES)
#
#.c.lo:
# $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
#
# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
# gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
# touch liblinuxgc.so
mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s \
$(srcdir)/mips_ultrix_mach_dep.s \
$(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_darwin_mach_dep.s \
$(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
$(srcdir)/ia64_save_regs_in_stack.s \
$(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
rm -f mach_dep.o
./if_mach MIPS IRIX5 $(CC) -c -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
./if_mach POWERPC DARWIN $(AS) -o mach_dep.o $(srcdir)/powerpc_darwin_mach_dep.s
./if_mach ALPHA LINUX $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S
./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S
./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
rm -f mark_rts.o
-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
# Work-around for DEC optimizer tail recursion elimination bug.
# The ALPHA-specific line should be removed if gcc is used.
alloc.o: version.h
cord:
mkdir cord
cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
mv cordbscs.o cord/cordbscs.o
# not all compilers understand -o filename
cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
mv cordxtra.o cord/cordxtra.o
cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
mv cordprnt.o cord/cordprnt.o
cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
rm -f cord/cordtest
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
rm -f cord/de
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
$(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
$(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
if_not_there: $(srcdir)/if_not_there.c
$(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
clean:
rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
threadlibs $(CORD_OBJS) cord/cordtest cord/de
-rm -f *~
gctest: tests/test.o gc.a $(UTILS)
rm -f gctest
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
# If an optimized setjmp_test generates a segmentation fault,
# odds are your compiler is broken. Gctest may still work.
# Try compiling setjmp_t.c unoptimized.
setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
test: KandRtest cord/cordtest
cord/cordtest
# Those tests that work even with a K&R C compiler:
KandRtest: setjmp_test gctest
./setjmp_test
./gctest
add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
$(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
gcname: $(srcdir)/gcname.c $(srcdir)/version.h
$(CC) -o gcname $(srcdir)/gcname.c
gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
cp Makefile Makefile.old
cp Makefile.direct Makefile
rm -f `./gcname`
ln -s . `./gcname`
./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
tar cvfh gc.tar `cat /tmp/gc.tar-files`
cp gc.tar `./gcname`.tar
gzip `./gcname`.tar
rm `./gcname`
pc_gc.tar: $(SRCS) $(OTHER_FILES)
tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
floppy: pc_gc.tar
-mmd a:/cord
-mmd a:/cord/private
-mmd a:/include
-mmd a:/include/private
mkdir /tmp/pc_gc
cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
-mcopy -tmn /tmp/pc_gc/* a:
-mcopy -tmn /tmp/pc_gc/cord/* a:/cord
-mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
-mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
-mcopy -tmn /tmp/pc_gc/include/* a:/include
-mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
rm -r /tmp/pc_gc
gc.tar.Z: gc.tar
compress gc.tar
gc.tar.gz: gc.tar
gzip gc.tar
lint: $(CSRCS) tests/test.c
lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
# BTL: added to test shared library version of collector.
# Currently works only under SunOS5. Requires GC_INIT call from statically
# loaded client code.
ABSDIR = `pwd`
gctest_dyn_link: tests/test.o libgc.so
$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
gctest_irix_dyn_link: tests/test.o libirixgc.so
$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
# The following appear to be dead, especially since libgc_globals.h
# is apparently lost.
test_dll.o: tests/test.c libgc_globals.h
$(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
test_dll: test_dll.o libgc_dll.a libgc.dll
$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
SYM_PREFIX-libgc=GC
# Uncomment the following line to build a GNU win32 DLL
# include Makefile.DLLs
reserved_namespace: $(SRCS)
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
sed s/GC_/_GC_/g < $$file > tmp; \
cp tmp $$file; \
done
user_namespace: $(SRCS)
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
sed s/_GC_/GC_/g < $$file > tmp; \
cp tmp $$file; \
done