gcc/libgo/go/fmt/doc.go

273 lines
11 KiB
Go

// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
/*
Package fmt implements formatted I/O with functions analogous
to C's printf and scanf. The format 'verbs' are derived from C's but
are simpler.
Printing
The verbs:
General:
%v the value in a default format.
when printing structs, the plus flag (%+v) adds field names
%#v a Go-syntax representation of the value
%T a Go-syntax representation of the type of the value
%% a literal percent sign; consumes no value
Boolean:
%t the word true or false
Integer:
%b base 2
%c the character represented by the corresponding Unicode code point
%d base 10
%o base 8
%q a single-quoted character literal safely escaped with Go syntax.
%x base 16, with lower-case letters for a-f
%X base 16, with upper-case letters for A-F
%U Unicode format: U+1234; same as "U+%04X"
Floating-point and complex constituents:
%b decimalless scientific notation with exponent a power of two,
in the manner of strconv.FormatFloat with the 'b' format,
e.g. -123456p-78
%e scientific notation, e.g. -1234.456e+78
%E scientific notation, e.g. -1234.456E+78
%f decimal point but no exponent, e.g. 123.456
%F synonym for %f
%g whichever of %e or %f produces more compact output
%G whichever of %E or %f produces more compact output
String and slice of bytes:
%s the uninterpreted bytes of the string or slice
%q a double-quoted string safely escaped with Go syntax
%x base 16, lower-case, two characters per byte
%X base 16, upper-case, two characters per byte
Pointer:
%p base 16 notation, with leading 0x
There is no 'u' flag. Integers are printed unsigned if they have unsigned type.
Similarly, there is no need to specify the size of the operand (int8, int64).
Width is specified by an optional decimal number immediately following the verb.
If absent, the width is whatever is necessary to represent the value.
Precision is specified after the (optional) width by a period followed by a
decimal number. If no period is present, a default precision is used.
A period with no following number specifies a precision of zero.
Examples:
%f: default width, default precision
%9f width 9, default precision
%.2f default width, precision 2
%9.2f width 9, precision 2
%9.f width 9, precision 0
Width and precision are measured in units of Unicode code points.
(This differs from C's printf where the units are numbers
of bytes.) Either or both of the flags may be replaced with the
character '*', causing their values to be obtained from the next
operand, which must be of type int.
For most values, width is the minimum number of characters to output,
padding the formatted form with spaces if necessary.
For strings, precision is the maximum number of characters to output,
truncating if necessary.
For floating-point values, width sets the minimum width of the field and
precision sets the number of places after the decimal, if appropriate,
except that for %g/%G it sets the total number of digits. For example,
given 123.45 the format %6.2f prints 123.45 while %.4g prints 123.5.
The default precision for %e and %f is 6; for %g it is the smallest
number of digits necessary to identify the value uniquely.
For complex numbers, the width and precision apply to the two
components independently and the result is parenthesized, so %f applied
to 1.2+3.4i produces (1.200000+3.400000i).
Other flags:
+ always print a sign for numeric values;
guarantee ASCII-only output for %q (%+q)
- pad with spaces on the right rather than the left (left-justify the field)
# alternate format: add leading 0 for octal (%#o), 0x for hex (%#x);
0X for hex (%#X); suppress 0x for %p (%#p);
for %q, print a raw (backquoted) string if strconv.CanBackquote
returns true;
write e.g. U+0078 'x' if the character is printable for %U (%#U).
' ' (space) leave a space for elided sign in numbers (% d);
put spaces between bytes printing strings or slices in hex (% x, % X)
0 pad with leading zeros rather than spaces;
for numbers, this moves the padding after the sign
Flags are ignored by verbs that do not expect them.
For example there is no alternate decimal format, so %#d and %d
behave identically.
For each Printf-like function, there is also a Print function
that takes no format and is equivalent to saying %v for every
operand. Another variant Println inserts blanks between
operands and appends a newline.
Regardless of the verb, if an operand is an interface value,
the internal concrete value is used, not the interface itself.
Thus:
var i interface{} = 23
fmt.Printf("%v\n", i)
will print 23.
Except when printed using the verbs %T and %p, special
formatting considerations apply for operands that implement
certain interfaces. In order of application:
1. If an operand implements the Formatter interface, it will
be invoked. Formatter provides fine control of formatting.
2. If the %v verb is used with the # flag (%#v) and the operand
implements the GoStringer interface, that will be invoked.
If the format (which is implicitly %v for Println etc.) is valid
for a string (%s %q %v %x %X), the following two rules apply:
3. If an operand implements the error interface, the Error method
will be invoked to convert the object to a string, which will then
be formatted as required by the verb (if any).
4. If an operand implements method String() string, that method
will be invoked to convert the object to a string, which will then
be formatted as required by the verb (if any).
For compound operands such as slices and structs, the format
applies to the elements of each operand, recursively, not to the
operand as a whole. Thus %q will quote each element of a slice
of strings, and %6.2f will control formatting for each element
of a floating-point array.
To avoid recursion in cases such as
type X string
func (x X) String() string { return Sprintf("<%s>", x) }
convert the value before recurring:
func (x X) String() string { return Sprintf("<%s>", string(x)) }
Explicit argument indexes:
In Printf, Sprintf, and Fprintf, the default behavior is for each
formatting verb to format successive arguments passed in the call.
However, the notation [n] immediately before the verb indicates that the
nth one-indexed argument is to be formatted instead. The same notation
before a '*' for a width or precision selects the argument index holding
the value. After processing a bracketed expression [n], arguments n+1,
n+2, etc. will be processed unless otherwise directed.
For example,
fmt.Sprintf("%[2]d %[1]d\n", 11, 22)
will yield "22, 11", while
fmt.Sprintf("%[3]*.[2]*[1]f", 12.0, 2, 6),
equivalent to
fmt.Sprintf("%6.2f", 12.0),
will yield " 12.00". Because an explicit index affects subsequent verbs,
this notation can be used to print the same values multiple times
by resetting the index for the first argument to be repeated:
fmt.Sprintf("%d %d %#[1]x %#x", 16, 17)
will yield "16 17 0x10 0x11".
Format errors:
If an invalid argument is given for a verb, such as providing
a string to %d, the generated string will contain a
description of the problem, as in these examples:
Wrong type or unknown verb: %!verb(type=value)
Printf("%d", hi): %!d(string=hi)
Too many arguments: %!(EXTRA type=value)
Printf("hi", "guys"): hi%!(EXTRA string=guys)
Too few arguments: %!verb(MISSING)
Printf("hi%d"): hi %!d(MISSING)
Non-int for width or precision: %!(BADWIDTH) or %!(BADPREC)
Printf("%*s", 4.5, "hi"): %!(BADWIDTH)hi
Printf("%.*s", 4.5, "hi"): %!(BADPREC)hi
Invalid or invalid use of argument index: %!(BADINDEX)
Printf("%*[2]d", 7): %!d(BADINDEX)
Printf("%.[2]d", 7): %!d(BADINDEX)
All errors begin with the string "%!" followed sometimes
by a single character (the verb) and end with a parenthesized
description.
If an Error or String method triggers a panic when called by a
print routine, the fmt package reformats the error message
from the panic, decorating it with an indication that it came
through the fmt package. For example, if a String method
calls panic("bad"), the resulting formatted message will look
like
%!s(PANIC=bad)
The %!s just shows the print verb in use when the failure
occurred.
Scanning
An analogous set of functions scans formatted text to yield
values. Scan, Scanf and Scanln read from os.Stdin; Fscan,
Fscanf and Fscanln read from a specified io.Reader; Sscan,
Sscanf and Sscanln read from an argument string. Scanln,
Fscanln and Sscanln stop scanning at a newline and require that
the items be followed by one; Scanf, Fscanf and Sscanf require
newlines in the input to match newlines in the format; the other
routines treat newlines as spaces.
Scanf, Fscanf, and Sscanf parse the arguments according to a
format string, analogous to that of Printf. For example, %x
will scan an integer as a hexadecimal number, and %v will scan
the default representation format for the value.
The formats behave analogously to those of Printf with the
following exceptions:
%p is not implemented
%T is not implemented
%e %E %f %F %g %G are all equivalent and scan any floating point or complex value
%s and %v on strings scan a space-delimited token
Flags # and + are not implemented.
The familiar base-setting prefixes 0 (octal) and 0x
(hexadecimal) are accepted when scanning integers without a
format or with the %v verb.
Width is interpreted in the input text (%5s means at most
five runes of input will be read to scan a string) but there
is no syntax for scanning with a precision (no %5.2f, just
%5f).
When scanning with a format, all non-empty runs of space
characters (except newline) are equivalent to a single
space in both the format and the input. With that proviso,
text in the format string must match the input text; scanning
stops if it does not, with the return value of the function
indicating the number of arguments scanned.
In all the scanning functions, a carriage return followed
immediately by a newline is treated as a plain newline
(\r\n means the same as \n).
In all the scanning functions, if an operand implements method
Scan (that is, it implements the Scanner interface) that
method will be used to scan the text for that operand. Also,
if the number of arguments scanned is less than the number of
arguments provided, an error is returned.
All arguments to be scanned must be either pointers to basic
types or implementations of the Scanner interface.
Note: Fscan etc. can read one character (rune) past the input
they return, which means that a loop calling a scan routine
may skip some of the input. This is usually a problem only
when there is no space between input values. If the reader
provided to Fscan implements ReadRune, that method will be used
to read characters. If the reader also implements UnreadRune,
that method will be used to save the character and successive
calls will not lose data. To attach ReadRune and UnreadRune
methods to a reader without that capability, use
bufio.NewReader.
*/
package fmt