glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This feature is specifically for the C++ compiler to offload calling
thread_local object destructors on thread program exit, to glibc.
This is to overcome the possible complication of destructors of
thread_local objects getting called after the DSO in which they're
defined is unloaded by the dynamic linker. The DSO is marked as
'unloadable' if it has a constructed thread_local object and marked as
'unloadable' again when all the constructed thread_local objects
defined in it are destroyed.
cxa_at_quick_exit.
(static-only-routines): Add at_quick_exit.
* stdlib/Versions: Export quick_exit and __cxa_at_quick_exit for
GLIBC_2.10.
* stdlib/quick_exit.c: New file.
* stdlib/at_quick_exit.c: New file.
* stdlib/cxa_at_quick_exit.c: New file.
* stdlib/cxa_atexit.c (__cxa_atexit): Move body to new function. Call
it appropriately.
(__internal_atexit): New function.
(__new_exitfn): Now takes parameter to point to the list to use.
* stdlib/cxa_finalize.c: Remove quick_exit handlers, don't call them.
* stdlib/exit.c (__run_exit_handlers): New function. Split from...
(exit): ...here. Just call __run_exit_handlers appropriately.
* stdlib/exit.h: Declare __quick_exit_funcs, __run_exit_handlers,
__internal_atexit, __cxa_at_quick_exit. Adjust __new_exitfn.
* stdlib/on_exit.c: Adjust call to __new_exitfn.
* stdlib/stdlib.h: Declare at_quick_exit and quick_exit.
clobbering memory at or above uc_stack.ss_sp + uc_stack.ss_size.
* stdlib/Makefile: Add rules to build and run tst-makecontext2.
* stdlib/tst-makecontext2.c: New test.
* stdlib/msort.c: Include stdint.h.
(struct msort_param): New type.
(msort_with_tmp): Use struct msort_param pointer for unchanging
parameters. Add optimized handling for several common sizes
and indirect sorting mode.
(qsort): Adjust msort_with_tmp callers. For big S use indirect
sorting.
Suggested by Belazougui Djamel .
* stdlib/Makefile (tests): Add tst-qsort2.
* stdlib/tst-qsort2.c: New test.
2006-12-18 Jakub Jelinek <jakub@redhat.com>
[BZ #3747]
* stdlib/jrand48_r.c (__jrand48_r): Make sure result is in the
[-231 .. 231) range.
* stdlib/tst-rand48.c (main): Fix expected values for 64-bit
targets.
* stdlib/tst-rand48-2.c: New test.
* stdlib/Makefile (tests): Add tst-rand48-2.
($(all-subdirs-targets)): Use it in place of -C option.
* Rules: Use $(..) instead of ../ if it's already defined.
* Makeconfig (subdir-srcdirs): New variable.
* csu/Makefile (all-Banner-files): Use it.
* configure.in (--enable-add-ons): Set to "yes" by default.
Handle absolute add-on directory names when looking for configure
fragments. Also look for sysdeps/*/preconfigure fragments in add-ons.
Require add-on configure to set $libc_add_on_canonical, use
that in $add_ons_sfx. Substitute add_on_subdirs with computed list
of subdir names each add-on configure set in libc_add_on_subdirs.
* configure: Regenerated.
* Makefile (%/preconfigure: %/preconfigure.in): New pattern rule.
* config.make.in (add-on-subdirs): New substituted variable.
* Makeconfig (all-subdirs): Include $(add-on-subdirs).
Remove $(add-ons), $(sysdep-subdirs).
Don't filter out $(sysdep-inhibit-subdirs).
($(common-objpfx)sysd-dirs): Target removed. Don't include it.
($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs
files together to gen-sorted.awk, and $(subdirs) via -v.
(subdirs): Remove magic reordering for mach and hurd.
* scripts/gen-sorted.awk: Use subdirs from command line.
Process Subdirs and Depend files directly.
Let Subdirs files use "first dir" and "inhibit dir".
Always move elf to the end of the list.
* hurd/Depend: New file.
* sysdeps/mach/Subdirs: Use "first mach".
* Makefile (dist-separate): Remove linuxthreads.
(dist-separate-linuxthreads): Variable removed.
(glibc-%.tar rule): Use $(sysdeps-add-ons).
* Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs),
not $(all-subdirs).
(sysdep-makefiles): Use $(sysdirs).
(sysdirs): Remove export.
($(+sysdir_pfx)sysd-rules): Handle absolute directory names in
$(config-sysdirs).
(+sysdir_pfx): Variable removed.
(sysd-rules): Use $(common-objpfx) in place of it.
(sysdirs): Variable moved to ...
* Makeconfig (sysdirs): ... here.
Handle absolute directory names in $(config-sysdirs).
(full_config_sysdirs): Variable removed.
* csu/Makefile: Use $(sysdirs) in vpath directive.
* math/Makefile (ulps-file): Use $(sysdirs).
* sysdeps/gnu/Makefile (errlist-c): Likewise.
($(objpfx)errlist-compat.c): Likewise.
* Makeconfig (all-Subdirs-files): Likewise.
($(common-objpfx)config.status): Likewise.
* configure.in (sysnames): Handle absolute add-on directory names.
(sysdeps_add_ons): New variable, AC_SUBST it.
Compute which add-ons contributed sysdeps directories.
* configure: Regenerated.
* config.make.in (sysdeps-add-ons): New substituted variable.
* Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ...
* Makeconfig: ... to here.
(+sysdep_dirs): Append $(sysdeps-add-ons) here.
(+includes): Remove $(objpfx) include, already in $(+sysdep_dirs).
Remove $(includes).
(sysdep-makeconfigs): Use $(+sysdep_dirs).
($(common-objpfx)shlib-versions.v.i): Likewise.
* Makeconfig: Remove hair to set Makeconfig-add-on.
* sysdeps/unix/Makefile (sysdirs): Remove export.
(asm_CPP): Variable removed.
($(common-objpfx)sysd-syscalls): Pass them directly for the script.
* sysdeps/posix/Makefile: New file.
* Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix
values here with ?=.
* stdlib/gen-mpn-copy: File removed.
* stdlib/Makefile (distribute): Remove it.
* configure.in: Don't grok --with-gmp.
* configure: Regenerated.
* configure.in (libc_cv_idn): Don't check it; libidn/configure does it.
* configure: Regenerated.
* bare: Directory removed, saved in ports repository.
into $(inst_includedir)/%.h from sysdirs.
[headers]: Change static pattern rule for installing
$(headers) to do only those not matching %.h.
($(inst_includedir)/%.h: $(objpfx)%.h): Add this pattern rule instead.
($(inst_includedir)/%.h: %.h): Likewise.
($(inst_includedir)/%.h: $(..)include/%.h): Likewise.
* Makefile ($(inst_includedir)/gnu/stubs.h):
Add $(make-target-directory).
* stdlib/Makefile (headers): Restore headers removed in last change.
2006-01-16 Jakub Jelinek <jakub@redhat.com>
* math/e_exp2l.c: Don't include stdio.h, errno.h, stub-tag.h, include
math_private.h.
(__ieee754_exp2l): Compute for now as expl (M_LN2l * x)
instead of failing.
(exp2l): Remove stub_warning.
2006-01-15 Jakub Jelinek <jakub@redhat.com>
* io/tst-faccessat.c (do_test): Don't fail if geteuid () == 0.
prototype.
(nexttowardf): Redirect to __nldbl_nexttowardf.
(nexttoward): Redirect to nextafter.
(__MATHDECL_2, __MATHDECL_1): Redirect *l functions to
non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and
__NO_LONG_DOUBLE_MATH.
* math/complex.h (__MATHDECL_1): Likewise.
* math/bits/mathcalls.h (nexttoward): Don't prototype if
__LDBL_COMPAT.
* misc/sys/cdefs.h: Include <bits/wordsize.h>.
(__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH,
__LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros.
* libio/bits/stdio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/stdio.h [__LDBL_COMPAT]: #include it.
* libio/bits/libio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/libio.h [__LDBL_COMPAT]: #include it.
* libio/libioP.h: Include <math_ldbl_opt.h>.
* include/wchar.h (__fwprintf, __vfwprintf): Fix commented out
attribute.
(__vfwprintf_chk): New prototype. Add libc_hidden_proto.
* wcsmbs/bits/wchar-ldbl.h: New file.
* wcsmbs/Makefile (headers): Add it.
* wcsmbs/wchar.h [__LDBL_COMPAT]: #include it.
* wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed.
(vswprintf): Define as a macro rather than inline function.
* stdio-common/bits/printf-ldbl.h: New file.
* stdio-common/Makefile (headers): Add it.
* stdio-common/printf.h [__LDBL_COMPAT]: #include it.
* libio/fwprintf.c: Include libioP.h.
(fwprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/fwscanf.c: Include libioP.h.
(fwscanf): Rename to __fwscanf and add ldbl_strong_alias.
* libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf,
add ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(vsprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias
instead of weak_alias.
* libio/iovswscanf.c (vswscanf): Rename to __vswscanf,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* libio/obprintf.c (obstack_printf, obstack_vprintf): Use
ldbl_weak_alias instead of weak_alias.
* libio/swprintf.c: Include libioP.h.
(swprintf): Rename to __swprintf and add ldbl_strong_alias.
* libio/swscanf.c: Include libioP.h.
(swscanf): Rename to __swscanf and add ldbl_strong_alias.
* libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias
instead of weak_alias.
* libio/vswprintf.c (__vswprintf): Remove alias.
(vswprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/vwprintf.c: Include libioP.h.
(vwprintf): Rename to __vwprintf and add ldbl_strong_alias.
* libio/vwscanf.c (vwscanf): Rename to __vwscanf and add
ldbl_strong_alias.
* libio/wprintf.c: Include libioP.h.
(wprintf): Rename to __wprintf and add ldbl_strong_alias.
* libio/wscanf.c: Include libioP.h.
(wscanf): Rename to __wscanf and add ldbl_strong_alias.
* stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add
ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(asprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/dprintf.c (dprintf): Rename to __dprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/fprintf.c: Include libioP.h.
(fprintf): Rename to __fprintf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(_IO_fprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/fscanf.c: Include libioP.h.
(fscanf): Rename to __fscanf and add ldbl_strong_alias.
* stdio-common/printf.c: Include libioP.h.
(printf): Rename to __printf and add ldbl_strong_alias.
(_IO_printf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/printf_size.c (printf_size): Rename to __printf_size
and add ldbl_strong_alias.
* stdio-common/scanf.c (scanf): Rename to __scanf and add
ldbl_strong_alias.
* stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of
weak_alias.
* stdio-common/sprintf.c (sprintf): Rename to __sprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
(_IO_sprintf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/sscanf.c: Include libioP.h instead of iolibio.h.
(sscanf): Rename to __sscanf and add ldbl_strong_alias.
* stdio-common/vfprintf.c (vfprintf): Define to
_IO_vfprintf_internal. Use ldbl_strong_alias instead. Use
ldbl_hidden_def instead of libc_hidden_def.
(_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl,
handle the argument as double if it is non-zero.
(vfwprintf): Use ldbl_weak_alias instead of weak_alias.
(_IO_vfprintf): Add ldbl_strong_alias.
* stdio-common/vfscanf.c (_IO_vfscanf): Rename to
_IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add
ldbl_strong_alias.
(vfwscanf): Use ldbl_weak_alias instead of weak_alias.
(__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(vfscanf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/vprintf.c: Include libioP.h.
(vprintf): Rename to __vprintf and add ldbl_strong_alias.
* debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk
and add ldbl_strong_alias.
* debug/printf_chk.c (__printf_chk): Rename to ___printf_chk
and add ldbl_strong_alias.
* debug/snprintf_chk.c: Include libioP.h.
(__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias.
* debug/sprintf_chk.c: Include libioP.h.
(__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias.
* debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def.
* debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk
and add ldbl_strong_alias.
* debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT].
* wcsmbs/wchar.h (wcstold): Likewise.
* stdlib/strtod_l.c: Include math_ldbl_opt.h.
(____STRTOF_INTERNAL): Define.
(INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL.
(__STRTOF): Call ____STRTOF_INTERNAL instead.
[LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l):
Add compatibility symbols.
* stdlib/strtod.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal,
__wcstold_internal): Add compatibility symbols.
* stdlib/strtold.c: Include bits/wordsize.h, wchar.h.
(NEW, NEW1): Define.
(__new_strtold, __new_wcstold): New prototypes.
(____new_strtold_internal, ____new_wcstold_internal): Likewise.
Add libc_hidden_proto.
(STRTOF): Define to NEW (*told).
[__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add
long_double_symbol.
[__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal,
__strtold_internal): Likewise. Add libc_hidden_ver.
* stdlib/bits/stdlib-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/stdlib.h [__LDBL_COMPAT]: #include it.
* include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove
libc_hidden_proto.
(__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt,
__qgcvt, __qecvt_r, __qfcvt_r): New prototypes.
* misc/efgcvt_r.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(*fcvt_r): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(*ecvt_r): Likewise.
(cvt_symbol): Define. Use it on fcvt_r and ecvt_r.
* misc/efgcvt.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(fcvt): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(ecvt, gcvt): Likewise.
(cvt_symbol): Define. Use it on fcvt, ecvt and gcvt.
* stdlib/bits/monetary-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/monetary.h [__LDBL_COMPAT]: #include it.
* stdlib/strfmon.c: Include math_ldbl_opt.h.
(strfmon): Rename to __strfmon and add ldbl_strong_alias.
* stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO].
(__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl.
(__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias.
(strfmon_l): Use ldbl_weak_alias instead of weak_alias.
* misc/bits/syslog-ldbl.h: New file.
* misc/Makefile (headers): Add it.
* misc/sys/syslog.h [__LDBL_COMPAT]: #include it.
* misc/syslog.c: Include math_ldbl_opt.h.
(syslog): Rename to __syslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
(vsyslog): Rename to __vsyslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
* sysdeps/generic/math_ldbl_opt.h: New file.
* math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants.
Add weak_alias.
* math/w_j0l.c (j0l, y0l): Likewise.
* math/w_jnl.c (jnl, ynl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c
(__nexttowardl): Remove strong_alias.
(nexttowardl): Remove weak_alias.
* sysdeps/ieee754/ldbl-96/s_erfl.c
(__erfl, __erfcl): Remove strong_alias.
(erfl, erfcl): Remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-64-128/w_expl.c: New file.
* sysdeps/ieee754/ldbl-opt/configure.in: New file.
* sysdeps/ieee754/ldbl-opt/configure: New file.
* sysdeps/ieee754/ldbl-opt/Makefile: New file.
* sysdeps/ieee754/ldbl-opt/Versions: New file.
* sysdeps/ieee754/ldbl-opt/cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/cabsl.c: New file.
* sysdeps/ieee754/ldbl-opt/carg.c: New file.
* sysdeps/ieee754/ldbl-opt/cargl.c: New file.
* sysdeps/ieee754/ldbl-opt/cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/cimagl.c: New file.
* sysdeps/ieee754/ldbl-opt/conj.c: New file.
* sysdeps/ieee754/ldbl-opt/conjl.c: New file.
* sysdeps/ieee754/ldbl-opt/creal.c: New file.
* sysdeps/ieee754/ldbl-opt/creall.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_atan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clogl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_erf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file.
* sysdeps/ieee754/ldbl-opt/s_finite.c: New file.
* sysdeps/ieee754/ldbl-opt/s_floor.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fma.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmal.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fminl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/s_logb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_modf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/s_remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/s_rint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_round.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significand.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significandl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acos.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asin.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asinl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_coshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_drem.c: New file.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jn.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jnl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_logl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_pow.c: New file.
* sysdeps/ieee754/ldbl-opt/w_powl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file.
* sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32
after dbl-64.
* sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION):
%define this to to GLIBC_2.4.
* sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/Versions: New file.
* sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp,
__unordered_v9cmp): Define differently depending on
-m32 -mlong-double-{64,128}.
(__signbitl, sqrtl, __ieee754_sqrtl): New inlines.
* sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines):
Set.
(sysdep-routines): Add sparc32-quad-routines.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h.
(FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal
function.
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New
alias to _Q_sqrt.
* sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW.
(_IO_vfwscanf, _IO_vfwprintf): Likewise.
* libio/libioP.h (_IO_vdprintf): Likewise.
2005-09-27 Ulrich Drepper <drepper@redhat.com>
[BZ #1230]
* stdlib/strtod_l.c (STRNCASECMP): Always use C locale object.
(TOLOWER_C): Define. Use it when recognizing inf and nan.
* stdlib/Makefile (tests): Add bug-strtod2.
* stdlib/bug-strtod2.c: New file.
* stdlib/stdlib.h: Include <bits/stdlib.h> if fortification is
requested.
* Makefile (headers): Add bits/stdlib.h.
* include/bits/stdlib.h: New file.
* debug/Depend: New file.
* debug/ptsname_r_chk.c: New file.
* debug/realpath_chk.c: New file.
* debug/wctomb_chk.c: New file.
* debug/Makefile (routines): Add ptsname_r_chk, realpath_chk, and
wctomb_chk.
* debug/Versions: Export __ptsname_r_chk, __realpath_chk, and
__wctomb_chk.
* debug/tst-chk1.c: Add tests for __ptsname_r_chk, __realpath_chk, and
__wctomb_chk.
2005-02-09 Jakub Jelinek <jakub@redhat.com>
[BZ #710]
* stdlib/random_r.c (__initstate_r): Save old state.
* stdlib/Makefile (tests): Add tst-random2.
* stdlib/tst-random2.c: New test.
Reported by Peter Bergner <bergner@vnet.ibm.com>.
(s390-.*-.*, powerpc.*-.*-.*, sparc.*-.*-.*): Add WORDSIZE64 entries
for these mapping back to the above.
2005-01-20 Ulrich Drepper <drepper@redhat.com>
* posix/execl.c: Do not allocate potentially large buffers on the
stack.
* posix/execle.c: Likewise.
* posix/execlp.c: Likewise.
* posix/execlp.c: Likewise.
(script_execute): Removed.
(allocate_scripts_argv): New function. Called at most once to
allocate memory, not every time a script is run. Adjust caller.
* sysdeps/generic/wordexp.c (exec_comm): Add a few
TEMP_FAILURE_RETRY. Reorganize code to avoid multiple calls to
exec_comm_child.
(exec_comm_child): Can now be inlined.
* posix/Makefile: Add -fomit-frame-pointer for a few more files.
* stdlib/Makefile: Likewise.
* wcsmbs/mbrtowc.c (__mbrtowc): Cap s + n at the end of address space.
* stdlib/Makefile (tests): Add testmb2.
(testmb2-ENV): New.
* stdlib/testmb2.c: New test.
2004-02-23 Jakub Jelinek <jakub@redhat.com>
2003-09-17 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/vfork.S: Branch to fork if
libpthread is loaded. Elide backwards compatibility code when not
required.
2003-09-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/Makefile (sysdep-CFLAGS): If not in math or csu
subdir, add -mpreferred-stack-boundary=4, with few exceptions.
2003-09-17 Jakub Jelinek <jakub@redhat.com>
* Makeconfig (stack-align-test-flags): Set.
* stdlib/Makefile (CFLAGS-tst-bsearch.c): Add
$(stack-align-test-flags).
* stdlib/tst-bsearch.c: Include tst-stack-align.h.
(align_check): New var.
(comp): Use TEST_STACK_ALIGN macro.
(do_test): Fail if align_check != 1.
* sysdeps/generic/tst-stack-align.h: New file.
* sysdeps/i386/i686/Makefile (stack-align-test-flags): Add -msse.
* sysdeps/i386/i686/tst-stack-align.h: New file.
More cancellation handling fixups.
* sysdeps/unix/sysv/linux/not-cancel.h: Add waitpid_not_cancel.
* sysdeps/generic/not-cancel.h: Likewise.
* catgets/open_catalog.c: Use not-cancelable syscalls.
* time/Makefile (CFLAGS-getdate.c): Add -fexceptions.
* sysdeps/unix/sysv/linux/llseek.c: Must not be cancelable.
* sysdeps/unix/syscalls.list: Don't mark lseek as cancelable.
* dlfcn/dlfcn.h: Mark dlopen with __THROW again.
* io/fcntl.h: Don't mark posix_fallocate with __THROW.
* libio/fileops.c: Use not-cancelable syscalls for fclose.
* libio/iopopen.c: Use no-cancelable syscalls.
* libio/stdio.h: Mark popen and pclose with __THROW again.
* misc/Makefile (CFLAGS-syslog.c): Add -fexceptions.
* misc/syslog.c: Fix locking and cancellation cleanup handling.
* posix/unistd.h: Mark ttyname and ttyname_r again with __THROW.
* stdio-common/Makefile (CFLAGS-tmpfile.c, CFLAGS-tmpfile64.c,
CFLAGS-tempname.c): Add -fexceptions.
* stdlib/Makefile (CFLAGS-mkstemp.c): Add -fexceptions.
* string/string.h: Mark strerror and strerror_r with _THROW again.
* sysdeps/generic/unwind.inc: New file. Copied from gcc.
* sysdeps/generic/unwind-dw2.c: Update from gcc version. Remove
#ifs since we now need all the code compiled.
* sysdeps/posix/spawni.c: Use close_not_cancel instead of close.
* sysdeps/unix/closedir.c: Use not-cancelable syscalls.
* sysdeps/unix/opendir.c: Likewise.
2003-06-15 Ulrich Drepper <drepper@redhat.com>
Fix cancellation point handling wrt exception based cleanup.
* io/Makefile: Compile fcntl.c, poll.c, and lockf.c with exceptions.
* misc/Makefile: Compile pselect.c, readv.c, writev.c, and usleep.c
with exceptions.
* posix/Makefile: Compile pread.c, pread64.c, pwrite.c, pwrite64.c,
sleep.c, wait.c, waitid.c, and waitpid.c with exceptions.
* rt/Makefile: Compile aio_suspend.c and clock_nanosleep.c with
exceptions.
* signal/Makefile: Compile sigpause.c, sigsuspend.c, sigtimedwait.c,
sigwait.c, and sigwaitinfo.c with exceptions.
* stdlib/Makefile: Compile system.c with exceptions.
* sysvipc/Makefile: Compile msgrcv.c and msgsnd.c with exceptions.
* termios/Makefile: Compile tcdrain.c with exceptions.
* sysdeps/generic/lockf.c: Add comment explaining the cancellation
situation.
* sysdeps/generic/pselect.c: Likewise.
* sysdeps/posix/sigpause.c: Likewise.
* sysdeps/posix/system.c: Likewise.
* sysdeps/posix/waitid.c: Likewise.
* sysdeps/unix/sysv/linux/sleep.c: Likewise.
* sysdeps/unix/sysv/linux/usleep.c: Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Major rewrite of
INTERNAL_SYSCALL to not use push inside asm statement so that
unwind info is correct around the syscall.
* sysdeps/unix/clock_nanosleep.c: Add cancellation support.
* sysdeps/unix/sysv/linux/clock_nanosleep.c: Likewise.
* sysdeps/posix/system.c (do_system): Add support for installation
of cancellation handlers.
* sysdeps/unix/sysv/linux/i386/system.c: New file.
* stdlib/Makefile (tests): Add tst-system.
* stdlib/tst-system.c: New file.
2002-03-14 Jakub Jelinek <jakub@redhat.com>
* locale/broken_cur_max.c (__ctype_get_mb_cur_max): Use nl_langinfo.
* locale/Versions (_nl_current_LC_COLLATE, _nl_current_LC_CTYPE):
Remove.
2002-03-14 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/mp_clz_tab.c: New file.
* sysdeps/i386/mp_clz_tab.c: New file.
* sysdeps/hppa/mp_clz_tab.c: New file.
* sysdeps/powerpc/mp_clz_tab.c: New file.
* stdlib/Makefile (aux): Revert last patch.
* math/Makefile (gmp-objs): Likewise.
2002-03-13 Paul Eggert <eggert@twinsun.com>
* time/strftime.c: Comment fixes for references to obsolescent
standards, In most cases the simplest fix is to remove the
confusing comments. Cross-referencing all the standards properly
is a bit of a pain, and it should be enough to put that info in
the documentation as I did in my recent time.texi patch.
2002-03-13 Paul Eggert <eggert@twinsun.com>
* manual/time.texi (Formatting Calendar Time):
ISO C99 also specifies the E and O modifiers.
%P is a GNU extension, and is not in ISO C99.
Mention that %r is equivalent to %I:%M:%S %p in the POSIX locale.
%T is also in ISO C99.
The RFC 822 example is not valid in arbitrary locales.
Reword the POSIX.2 wording slightly, to make it a bit clearer
that POSIX.2 formats are also supported by later POSIX versions.
If a format was introduced in ISO C99 it is also required by
POSIX.1-2001.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-03-16 David Mosberger <davidm@hpl.hp.com>
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h (struct sigcontext):
Drop hack that was needed for 2.1.1 kernel headers.
* sysdeps/unix/sysv/linux/ia64/ucontext_i.h: New file.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Rewrite to make it
overlay with kernel's "struct sigcontext".
* sysdeps/unix/sysv/linux/ia64/Makefile (sysdep_headers): Add
sys/rse.h for "misc" subdir.
(sysdep_routines): Add __start_context for "stdlib" subdir.
* sysdeps/unix/sysv/linux/ia64/sys/rse.h: New file (based on
kernel file of the same name).
* stdlib/Makefile (tests): Add tst-setcontext.
* stdlib/tst-setcontext.c: New file (based on a sample program by
Uli Drepper).
* sysdeps/unix/sysv/linux/ia64/setcontext.S: New file.
* sysdeps/unix/sysv/linux/ia64/getcontext.S: New file.
* sysdeps/unix/sysv/linux/ia64/__start_context.S: New file.
* sysdeps/unix/sysv/linux/ia64/makecontext.c: New file.
* sysdeps/unix/sysv/linux/ia64/__longjmp.S (__longjmp): Use extr.u
instead of shift & and.
2001-02-26 Ulrich Drepper <drepper@redhat.com>
* dlfcn/Makefile (distribute): Add modatexit.c and modcxaatexit.c.
(tests): Add tstatexit and tstcxaatexit.
(module-names): Add modatexit and modcxaatexit.
Add rules to build and run tstatexit and tstcxaatexit.
* dlfcn/modatexit.c: New file.
* dlfcn/modcxaatexit.c: New file.
* dlfcn/tstatexit.c: New file.
* dlfcn/tstcxaatexit.c: New file.
* io/Makefile: Pass -DHAVE_DOT_HIDDEN to stat and mknod functions if
.hidden is available.
* io/stat.c: If .hidden is available use it to avoid exporting
functions.
* io/fstat.c: Likewise.
* io/lstat.c: Likewise.
* io/stat64.c: Likewise.
* io/fstat64.c: Likewise.
* io/lstat64.c: Likewise.
* sysdeps/generic/mknod.c: Likewise.
* malloc/mtrace.c: Use __cxa_atexit and not atexit.
* sysdeps/generic/bb_init_func.c: Likewise.
* sysdeps/generic/libc-start.c: Likewise.
* stdlib/atexit.c (__new_exitfn): Move to cxa_atexit.c.
(atexit): Implement using __cxa_atexit.
Use .hidden if availble to avoid exporting atexit.
* stdlib/cxa_atexit.c (__new_exitfn): Moved to here from atexit.c.
* stdlib/Versions: Export __new_exitfn for GLIBC_2.2.3.
* stdlib/Makefile (routines): Add old_atexit.
(static-only-routines): Add atexit.
Pass -DHAVE_DOT_HIDDEN for atexit.c if .hidden is available.
* stdlib/old_atexit.c: New file.
* intl/Makefile: Remove bogus endif.
* stdlib/strfmon.c [USE_IN_LIBIO]: Define lock variable and store
point in FILE structure before calling _IO_init.
* stdlib/Makefile: Add -D_IO_MTSAFE_IO to CFLAGS for strfmon and
strfmon_l if necessary.
Reported by Jury Gerold <gjury@grips.com>.
2001-02-07 Ulrich Drepper <drepper@redhat.com>
* stdlib/strtod.c: Never stop prematurely reading digits before the
decimal point is found. Compute exponent limit for negative exponents
correctly. For numbers ending in all zeros eat the zeroes even before
the decimal point if the exponent is negative [PR libc/2072].
* stdlib/Makefile (tests): Add bug-strtod.
* stdlib/bug-strtod.c: New file.
* posix/regex.c (regex_compile): Don't store pointer in wchar_t array.
Store index.
(compile_range): Handle index being passed, not pointer.
Patch by Isamu Hasegawa <isamu@yamato.ibm.com>.
* stdlib/fmtmsg.c (fmtmsg): Change output format slightly to make
it look better and bring it closer to SysV behavior.
* stdlib/Makefile (distribute): Add tst-fmtmsg.sh.
(test-srcs): Add tst-fmtmsg.
(tests): Add $(objpfx)tst-fmtmsg.out. Add rule to generate it.
* stdlib/tst-fmtmsg.sh: New file.
* stdlib/tst-fmtmsg.c: New file.
2000-09-15 Ulrich Drepper <drepper@redhat.com>
* include/limits.h: Define LLONG_MIN, LLONG_MAX, ULLONG_MAX if
necessary. Move includes of POSIX and Unix limits files to the
end.
* stdlib/Makefile (tests): Add tst-limits.
* stdlib/tst-limits.h: New file.
* stdlib/Makefile (headers): Add bits/wchar.h.
* sysdeps/unix/sysv/linux/i386/bits/wchar.h: New file.
* sysdeps/generic/bits/wchar.h: New file.
* sysdeps/generic/stdint.h: Include <bits/wchar.h>. Use values in this
file to define WCHAR_MIN and WCHAR_MAX.
Change UINT*8_MAX and UIN*16_MAX value to type int.
* wcsmbs/wchar.h: Include <bits/wchar.h>. Use values in this
file to define WCHAR_MIN and WCHAR_MAX.
* sysdeps/alpha/fpu/bits/mathdef.h: Make FP_ILOGB0 and FP_ILOGBNAN
int values.
* sysdeps/arm/fpu/bits/mathdef.h: Likewise.
* sysdeps/generic/bits/mathdef.h: Likewise.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
* sysdeps/m68k/fpu/bits/mathdef.h: Likewise.
* sysdeps/powerpc/fpu/bits/mathdef.h: Likewise.
* sysdeps/sparc/fpu/bits/mathdef.h: Likewise.
* locale/locale.h (struct lconv): Add __ prefix to the new members
if not C99.
* sysdeps/generic/inttypes.h: Remove unnecessary imaxabs and
imaxdiv optimizations.
* sysdeps/wordsize-32/lldiv.c: Add hack to make alias work.
* sysdeps/wordsize-64/ldiv.c: Likewise.
* sysdeps/alpha/fpu/bits/fenv.h: Change type of FE_*_ENV macros to
const fenv_t*.
* sysdeps/generic/bits/fenv.h: Likewise.
* sysdeps/i386/fpu/bits/fenv.h: Likewise.
* sysdeps/ia64/bits/fenv.h: Likewise.
* sysdeps/m68k/fpu/bits/fenv.h: Likewise.
* sysdeps/mips/bits/fenv.h: Likewise.
* sysdeps/s390/fpu/bits/fenv.h: Likewise.
* sysdeps/sparc/fpu/bits/fenv.h: Likewise.
Reported by Joseph S. Myers <jsm28@cam.ac.uk>.
* catgets/open_catalog.c: Likewise.
2000-07-16 Ulrich Drepper <drepper@redhat.com>
* Makefile: Rewrite rules for tests to run them only when necessary.
* sort-test.sh: Produce output for failed tests.
* tst-fmon.sh: Likewise.
* tst-rpmatch.sh: Likewise.
2000-07-12 Bruno Haible <haible@clisp.cons.org>
* iconv/gconv_open.c (__gconv_open): Merge duplicated code.
2000-07-12 Bruno Haible <haible@clisp.cons.org>
* iconv/gconv_builtin.c (__gconv_get_builtin_trans): Initialize
__modname.
2000-07-12 Bruno Haible <haible@clisp.cons.org>
* iconv/gconv_open.c (__gconv_open): Initialize
result->__steps[cnt].__data.
2000-07-12 Mark Kettenis <kettenis@gnu.org>
* nss/getent.c (services_keys): Pass port number in network byte
order in call to getservbyport.
2000-07-11 Andreas Jaeger <aj@suse.de>
* stdlib/Makefile (test-canon-ARGS): Fix for building in the
source dir.
* intl/Makefile (do-gettext-test): Likewise.
* dirent/Makefile (opendir-tst1-ARGS): Likewise.
2000-07-11 Andreas Schwab <schwab@suse.de>
* Makeconfig (run-program-prefix): New rule.
(built-program-cmd): Use run-program-prefix.
2000-05-17 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/dl-cache.h (_DL_CACHE_DEFAULT_ID): Only define if
not yet defined.
(_dl_cache_check_flags): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/dl-cache.h: include_next
dl-cache.h.
2000-05-17 Andreas Jaeger <aj@suse.de>
* manual/creature.texi (Feature Test Macros): Remove paragraph
since the description is wrong.
Closes PR libc/1691, reported by Geoff Clare <gwc@unisoft.com>.
2000-05-17 Andreas Jaeger <aj@suse.de>
* time/test_time.args: Removed.
* time/Makefile (test_time-ARGS): Added contents here instead.
* posix/tstgetopt.args: Removed.
* posix/Makefile (tstgetopt-ARGS): Added contents here instead.
* Rules: Allow arguments for test files to be specified in
Makefile with testname-ARGS; remove rules with .args in it.
* dirent/Makefile (opendir-tst1-ARGS): Use this for opendir-tst1,
remove old bogus rule for opendir-tst1.args.
* stdlib/test-canon.c: Rewrite to use test-skeleton.c.
* stdlib/Makefile (test-canon-ARGS): New, supply argument to chdir
into objdir. This allows a readonly sourcetree.
Reported by lrgallardo@yahoo.com, closes PR libc/1421.
2000-05-16 Andreas Jaeger <aj@suse.de>,
David Huggins-Daines <dhd@linuxcare.com>
* sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Set
cache_data in case of only new cache format correctly.
* sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Align struct
cache_file_new.
* sysdeps/generic/dl-cache.h (ALIGN_CACHE): New macro to align
struct cache_file_new.
* elf/cache.c (save_cache): Fix str_offset if only new cache is
present.
* elf/cache.c (save_cache): Align struct new_file_cache.
(print_cache): Likewise.
Joseph Myers
Allan McRae
Andreas Schwab
Thomas Schwinge
Siddhesh Poyarekar
Ondrej Bilka
H.J. Lu
Dmitry V. Levin
Roland McGrath
Florian Weimer
Ulrich Drepper
Paul Eggert
Ulrich Drepper
Maciej W. Rozycki
Jakub Jelinek
Roland McGrath
Andreas Jaeger