m68k bits/mathinline.h declares various functions with const
attributes. These are inappropriate for functions that have results
depending on the rounding mode; the machine-independent
bits/mathcalls.h only uses const attributes for a very few functions
with no rounding mode dependence, and the m68k header should do
likewise. GCC uses pure for such functions with -frounding-math,
resulting in GCC mainline warning for conflicts with between the
header and the built-in attributes and glibc failing to build for m68k
with GCC mainline.
This patch fixes the attributes to avoid using const except when
bits/mathcalls.h does so. (There are a few functions where maybe
bits/mathcalls.h could do so but doesn't, but keeping the headers in
sync in this regard seems to be the safe approach.)
Tested compilation with build-many-glibcs.py with GCC mainline.
[BZ #22631]
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h (__m81_defun): Add
argument for attrubutes. All callers changed.
(__inline_mathop1): Likewise. All callers changed.
(__inline_mathop): Likewise. All callers changed.
[__USE_MISC] (scalbn): Use __inline_forward instead of
__inline_forward_c.
[__USE_ISOC99] (scalbln): Likewise.
[__USE_ISOC99] (nearbyint): Likewise.
[__USE_ISOC99] (lrint): Likewise.
[__USE_MISC] (scalbnf): Likewise.
[__USE_ISOC99] (scalblnf): Likewise.
[__USE_ISOC99] (nearbyintf): Likewise.
[__USE_ISOC99] (lrintf): Likewise.
[__USE_MISC] (scalbnl): Likewise.
[__USE_ISOC99] (scalblnl): Likewise.
[__USE_ISOC99] (nearbyintl): Likewise.
[__USE_ISOC99] (lrintl): Likewise.
* sysdeps/m68k/m680x0/fpu/mathimpl.h: All callers of
__inline_mathop and __m81_defun changed.
GLRO (_rtld_global_ro) is read-only after initialization and can
therefore not be patched at run time, unlike the hook table addresses
and their contents, so this is a desirable hardening feature.
The hooks are only needed if ld.so has not been initialized, and this
happens only after static dlopen (dlmopen uses a single ld.so object
across all namespaces).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Similar to commit 1ab47db00dfbc0128119e3503d3ed640ffc4830b
("mips64: fix clobbering s0 in setjmp() [BZ #22624]")
as sysdeps/mips/setjmp_aux.c is almost an identical copy
of sysdeps/mips/mips64/setjmp_aux.c.
[BZ #22624]
* sysdeps/mips/setjmp_aux.c (__sigsetjmp_aux): Use
inhibit_stack_protector.
When configured as --enable-stack-protector=all glibc
inserts stack checking canary into every function
including __sigsetjmp_aux(). Stack checking code
ends up using s0 register to temporary hold address
of global canary value.
Unfortunately __sigsetjmp_aux assumes no caller' caller-save
registers should be clobbered as it stores them as-is.
The fix is to disable stack protection of __sigsetjmp_aux.
Tested on the following test:
#include <setjmp.h>
#include <stdio.h>
int main() {
jmp_buf jb;
volatile register long s0 asm ("$s0");
s0 = 1234;
if (setjmp(jb) == 0)
longjmp(jb, 1);
printf ("$s0 = %lu\n", s0);
}
Without the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1082346228
With the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1234
[BZ #22624]
* sysdeps/mips/mips64/setjmp_aux.c (__sigsetjmp_aux): Use
inhibit_stack_protector.
There are three flavors of the crt startup code:
1) crt1.o used for non-pie,
2) Scrt1.o used for dynamic linked pie (dynamic linker relocates),
3) rcrt1.o used for static linked pie (self relocation is needed)
In the --enable-static-pie case crt1.o is built with -DPIC and in case
of static linking it interposes _dl_relocate_static_pie in libc to
avoid self relocation.
Scrt1.o is built with -DPIC -DSHARED and it relies on GOT entries that
the static linker cannot relax and thus need relocation before the
start code is executed, so rcrt1.o needs separate implementation.
This implementation does not work for .text > 4G position independent
executables, which is fine since the toolchain does not support
-mcmodel=large with -fPIE.
Tests pass with ld/22269 and ld/22263 binutils bugs fixed.
* sysdeps/aarch64/start.S (_start): Handle PIC && !SHARED case.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
While working on another patch I noticed that (a)
sysdeps/sparc/sparc32/Makefile is the only place with special
realclean settings, apart from po/, and (b) the generated files with a
rule in that Makefile to generate them (using m4) had been patched
manually so no longer corresponded with the output of the generator -
so if the timestamps were wrong, a build would result in changes to
the files in the source directory. (They also didn't correspond
because of changes in make 3.81 to how make handles whitespace at the
start of a line in a sequence of backslash-newline continuation lines
within a recipe.)
This patch fixes the generation and output files to match. The issue
with make and whitespace at start of continuation lines is fixed by
putting those newlines outside of arguments to echo, so the number of
spaces in the argument matches the number in the existing generated
files. Then divrem.m4 is changed to avoid generating whitespace-only
lines (my fix to the outputs from 2013; this fix to the generator also
changes the indentation of a label in the output files) and to
generate an alias in udiv.S (Adhemerval's fix from March).
build-many-glibcs.py doesn't have a non-v9 SPARC configuration,
because non-v9 32-bit SPARC didn't build when I set up
build-many-glibcs.py but sparcv9 did build. Whether or not non-v9
32-bit SPARC now builds (or indeed whether or not support for it is
obsolete), I tested by removing the sparcv8 and sparcv9 versions of
the four files in question, so forcing the generated files to be built
and used, and the compilation parts of the glibc testsuite passed.
* sysdeps/sparc/sparc32/Makefile
($(divrem:%=$(sysdep_dir)/sparc/sparc32/%.S)): Do not include
start-of-line whitespace in argument of echo.
* sysdeps/sparc/sparc32/divrem.m4: Avoid generating lines starting
with whitespace. Generate __wrap_.udiv alias.
* sysdeps/sparc/sparc32/rem.S: Regenerated.
* sysdeps/sparc/sparc32/sdiv.S: Likewise.
* sysdeps/sparc/sparc32/udiv.S: Likewise.
* sysdeps/sparc/sparc32/urem.S: Likewise.
This patch makes use of vectors for aligned inputs. Improvements
upto 30% seen for larger aligned inputs.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memset also apply to bzero as they share code.
For memset/bzero, performance comparison with niagara4 code:
For memset nonzero data,
256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache)
1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache)
For memset zero data (and bzero),
256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache)
1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memset-niagara7.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New
file.
* sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR):
Add niagara7 option.
* NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and
memset.
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memcpy also apply to mempcpy and memmove
where they share code. Optimizations for memset also apply
to bzero as they share code.
For memcpy/mempcpy/memmove, performance comparison with niagara4 code:
Long word aligned data
0-127 bytes - minimal changes
128-1023 bytes - 7-30% gain
1024+ bytes - 1-7% gain (in cache); 30-100% gain (out of cache)
Word aligned data
0-127 bytes - 50%+ gain
128-1023 bytes - 10-200% gain
1024+ bytes - 0-15% gain (in cache); 5-50% gain (out of cache)
Unaligned data
0-127 bytes - 0-70%+ gain
128-447 bytes - 40-80%+ gain
448-511 bytes - 1-3% loss
512-4096 bytes - 2-3% gain (in cache); 0-20% gain (out of cache)
4096+ bytes - ± 3% (in cache); 20-50% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memcpy-memmove-niagara7 and memmove-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdeps_routines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-memmove-niagara7.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __memcpy_niagara7, __mempcpy_niagara7,
and __memmove_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h (IFUNC_SELECTOR):
Add niagara7 option.
* sysdeps/sparc/sparc64/multiarch/memmove.c: New file.
* sysdeps/sparc/sparc64/multiarch/ifunc-memmove.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/rtld-memmove.c: Likewise.
Tested in sparcv9-*-* and sparc64-*-* targets in both non-multi-arch and
multi-arch configurations.
* sysdeps/sparc/sparc32/sparcv9/memmove.S: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/memmove.S: Likewise.
* sysdeps/sparc/sparc64/rtld-memmove.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds support for the ADP (also known as adi) hardware
capability, as reported by the kernel sparc port when running on M7
machines.
Tested in both sparcv9-*-* and sparc64-*-* targets.
* sysdeps/sparc/bits/hwcap.h (HWCAP_SPARC_ADP): Defined.
* sysdeps/sparc/dl-procinfo.c: Added "adp" to the
_dl_sparc_cap_flags array.
* sysdeps/sparc/dl-procinfo.h (_DL_HWCAP_COUNT): Increment.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace the simple byte-wise compare in the misaligned case with a
dword compare with page boundary checks in place. For simplicity I've
chosen a 4K page boundary so that we don't have to query the actual
page size on the system.
This results in up to 3x improvement in performance in the unaligned
case on falkor and about 2.5x improvement on mustang as measured using
bench-strcmp.
* sysdeps/aarch64/strcmp.S (misaligned8): Compare dword at a
time whenever possible.
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
When running strace, IPC_64 was set in the command, but ia64 is
an architecture where CONFIG_ARCH_WANT_IPC_PARSE_VERSION *isn't* set
in the kernel, so ipc_parse_version just returns IPC_64 without
clearing the IPC_64 bit in the command.
* sysdeps/unix/sysv/linux/ia64/ipc_priv.h: New file defining
__IPC_64 to 0 to avoid IPC_64 being set.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
The same logic used in s_cosf.S version for x86 and powerpc
is used to create a generic s_cosf.c, so there is no performance
improvement in x86_64 and powerpc64.
* sysdeps/ieee754/flt-32/s_cosf.c: New implementation.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
In _dl_runtime_resolve[_vx], unwinding fails after the new stack frame
is created as there is no CFI rule for r15. This is also observeable in
GDB: Backtrace stopped: previous frame inner to this frame (corrupt stack?)
Therefore this patch is now storing r15 on stack and is using cfi_offset rule.
The stmg/lmg instruction is used to store/load r14 and r15 with one instruction.
On 64bit, the offsets of the fprs have moved to store r15 directly after r14.
On 31bit, the r14/r15 is now stored between the other gprs and fprs as the space
wasn't used.
ChangeLog:
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve):
Store r15 on stack and add cfi rule.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Likewise.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
This patch makes the libm_alias_float macro support creating _Float32
aliases, in preparation for enabling glibc support for that type.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* sysdeps/generic/libm-alias-float.h: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32]
(libm_alias_float_other_r): Create f32 alias.
(libm_alias_float_r): Use semicolon before call to
libm_alias_float_other_r.
This patch corrects three ia64 libm_alias_float_other calls so they
generate the intended _Float32 aliases when such aliases are enabled.
Tested with build-many-glibcs.py for ia64-linux-gnu (that installed
stripped shared libraries are unchanged when applied to current
sources, and that this enables compilation tests to pass when used in
conjunction with other _Float32 patches).
* sysdeps/ia64/fpu/e_exp2f.S (__exp2f): Use exp2 not __exp2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_log2f.S (__log2f): Use log2 not __log2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_powf.S (__powf): Use pow not __pow as second
argument to libm_alias_float_other.
The ldbl-96 implementation of j1l has some function-local variables
that are declared static for no apparent reason (this dates back to
the first addition of that file).
Any vaguely recent compiler, probably including any that are supported
for building glibc, optimizes away the "static" here, as the values of
the variables on entry to the function are dead. So there is not
actually a user-visible bug here at present (but with any compilers
that didn't optimize away the static at all, possibly building with
less or no optimization, so that the function stored intermediate
values to and then loaded them from the variables, there would have
been a thread-safety issue). But the "static" clearly doesn't belong
there and might potentially make things unsafe were compilation
without optimization to be supported in future, so this patch removes
it.
Tested for x86_64.
* sysdeps/ieee754/ldbl-96/e_j1l.c (qone): Don't make local
variables static.
I noticed that an x86_64 build of libm unexpectedly contained more
non-constant data than an older version (before _Float128 support)
did. The problem is non-const arrays in the ldbl-128 j0l and j1l
implementations; this patch makes those arrays, and the corresponding
ldbl-128ibm ones, const.
Tested for x86_64, and tested compilation for powerpc with
build-many-glibcs.py.
* sysdeps/ieee754/ldbl-128/e_j0l.c (Y0_2N): Make const.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch avoid an extra floating point to integer conversion in
reduced internal function for generic sinf by defining the sign as
double instead of integers.
There is no much difference on Haswell with GCC 7.2.1:
Before After
min 9.11 9.108
mean 21.982 21.9224
However H.J. Lu reported gains on Skylake:
Before:
"sinf": {
"": {
"duration": 3.4044e+10,
"iterations": 1.9942e+09,
"max": 141.106,
"min": 7.704,
"mean": 17.0715
}
}
After:
"sinf": {
"": {
"duration": 3.40665e+10,
"iterations": 2.03199e+09,
"max": 95.994,
"min": 7.704,
"mean": 16.765
}
}
Checked on x86_64-linux-gnu.
* sysdeps/ieee754/flt-32/s_sinf.c (ones): Define as double.
(reduced): Use ones as double instead of integer.
sinf(NAN) should not signal invalid fp exception
so use isless instead of < where NAN is compared.
this makes the sinf tests pass on aarch64.
* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Use isless.
This patch makes the libm_alias_double macros support creating
_Float64 and _Float32x aliases, in preparation for enabling glibc
support for those types.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* sysdeps/generic/libm-alias-double.h: Include <bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
(libm_alias_double_r): Use semicolon before call to
libm_alias_double_other_r.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Include
<bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
Since s_sinf.c either assigns the return value of floor to integer or
passes double converted from integer to floor, this patch replaces
floor with simple casts.
Also since long == int for 32-bit targets, we can use long instead of
int to avoid 64-bit integer for 64-bit targets.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 130.566 129.564 30%
min 7.704 7.706 0%
mean 21.8188 19.1363 30%
* sysdeps/ieee754/flt-32/s_sinf.c (reduced): Replace long with
int.
(SINF_FUNC): Likewise. Replace floor with simple casts.
Avoid an issue in gcc where some of the vector (aka SIMD) ops will
sometimes end up getting wrongly optimized out. We use these
instructions in many of the string implementations. If/when we
have an upstreamed fix for this problem in gcc we can conditionalize
the use of the extended assembly workaround in glibc.
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_cosf.c: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fmaf.S: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_sinf.c: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf.c:
Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c:
Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf.c:
Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llroundf.c:
Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf.c:
Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrintf.c:
Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lroundf.c:
Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff.c:
Include <libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c:
Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_truncf.c:
Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_sinf.S: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
The new sinf implementation introduced localplt failures for all
platforms where the compiler did not inline the calls to floor
(converted to trunc by machine-independent optimizations). This patch
changes the calls to use __floor as normal in libm.
We can't use the public function names floor / floorf / floorl /
floorf128 in libm code in the absence of appropriate asms to redirect
floor/trunc calls, if not inlined, to use the internal names instead
(while avoiding breaking code building the floor functions themselves)
- while having such asms and then calling the public functions
unconditionally would be desirable for optimization (few architectures
have __floor inlines in math_private.h, and once the built-in function
is used you don't need them), using __floor is the minimum safe fix
for the present test regressions.
Tested with build-many-glibcs.py that this fixes the localplt test
failure for arm-linux-gnueabi.
* sysdeps/ieee754/flt-32/s_sinf.c (SINF_FUNC): Use __floor instead
of floor.
The __GI_* symbol aliases for __memcpy_generic are unnecessary since
they're never used. Add them only for libc.so to avoid PLT. Maybe
some time in future we need to evaluate the relative cost of PLT vs
gains from multiarch memcpy implementations and take a call on whether
to drop this completely.
* sysdeps/aarch64/multiarch/memcpy_generic.S (__GI_memcpy):
Define only for libc.so.
On s390, GDB fails to show the complete backtrace from within vdso functions.
The macro INTERNAL_VSYSCALL_CALL saves the return address in r14 to r10
before branching to the vdso function. The branch-instruction updates r14
in order to let the vdso function return. Then the original address in r14 is
restored from r10. Unfortunately, there are no cfi-rules and GDB fails.
Furthermore the call of the vdso function does not comply with the s390 ABI
as no stack-frame for the vdso-function is generated.
This patch removes the s390 specific macro INTERNAL_VSYSCALL_CALL
and the common implementation in sysdeps/unix/sysv/linux/sysdep-vdso.h is used.
Then the vdso function is called via function-pointer and GCC generates a
new stack-frame and emits all needed cfi-rules.
The defines CLOBBER_[0-6] are removed as they were only used in macro
INTERNAL_VSYSCALL_CALL.
The macro INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is not used on s390.
The only user is power. Thus it is removed from s390 sysdep.h.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(INTERNAL_VSYSCALL_CALL, CLOBBER_0, CLOBBER_1, CLOBBER_2,
CLOBBER_3, CLOBBER_4, CLOBBER_5, CLOBBER_6,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise.
Joseph Myers
Florian Weimer
Sergei Trofimovich
Szabolcs Nagy
Rajalakshmi Srinivasaraghavan
H.J. Lu
Thomas Schwinge
Patrick McGehearty
Jose E. Marchesi
Siddhesh Poyarekar
Adhemerval Zanella
James Clarke
Paul Clarke
Adhemerval Zanella
Stefan Liebler
David S. Miller
Rogerio Alves
Chris Metcalf