Objections were raised surrounding the calloc simplification
and it is better to revert the patch, continue discussions
and then submit a new patch for inclusion with all issues
fully addressed.
This patch optimizes strrchr() for ppc64. It uses aligned memory
access along with cmpb instruction and CPU prefetch to avoid
cache misses for speed improvement.
The glibc manual uses special annotations to include functions
in the summary chapter. These annotations were missing from the
functions in the threads chapter. This patch adds those special
markers and in turn adds these functions to the summary chapter.
While it may be argued that nested functions make the resulting
code easier to read, or worse to read the following two bugs
make it difficult to debug:
Bug 8300 - no local symbol information within nested or nesting
procedures
https://sourceware.org/bugzilla/show_bug.cgi?id=8300
Bug 53927 - wrong value for DW_AT_static_link
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53927
Until these are fixed I've made check_match a full function.
After they are fixed we can resume arguing about the merits
of nested functions on readability and maintenance.
This patch add a optimized llround/llroundf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized llrint/llrintf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized finite/finitef implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized isinf/isinff implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized isnan/isnanf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Current ARM soft-float implementation is violating the RTABI
(http://infocenter.arm.com/help/topic/com.arm.doc.ihi0043d/IHI0043D_rtabi.pdf)
Section 4.1.1.1:
When not otherwise specified by IEEE 754, the result on an invalid
operation should be the quiet NaN bit pattern with only the most
significant bit of the significand set, and all other significand bits
zero.
This patch fixes it by setting _FP_NANFRAC_* to zero.
Ran make check test with -mfloat-abi=soft. No regression.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_NANFRAC_S, _FP_NANFRAC_D)
(_FP_NANFRAC_Q): Set to zero.
In 84ba214c, I removed some redundant sign computations and in the
process, I incorrectly got rid of a temporary variable, thus passing
the absolute value of the input to bsloww1. This caused #16623.
This fix undoes the incorrect change.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This is a patch to the MIPS math_private.h file to define HAVE_RM_CTX and
implement the ctx macros. I also defined a few other macros and inline
functions that I skipped the first time.
This patch adds a new "Inter-Process Communication"
chapter to cover the sem*, msg*, and shm* functions.
Initially we document only the sem* function signatures
and their safety notes.
To make future improvements of allocator simpler we could for now calloc
just call malloc and memset. With that we could omit a changes that
would duplicate malloc changes anyway.
Source packages that need to support both 2.19 and
2.20 will need to decide to use _BSD_SOURCE and
_SVID_SOURCE vs. _DEFAULT_SOURCE.
The difficulty in making that decision is that
__GLIBC_MINOR__ is itself defined in features.h,
but you want to set the feature test macros before
including features.h.
Therefore to ease the transition we should disable
the warning if _DEFAULT_SOURCE is also defined.
https://sourceware.org/ml/libc-alpha/2014-02/msg00666.htmlhttps://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
This commit fixes a bug where the dynamic loader would crash
when loading audit libraries, via LD_AUDIT, where those libraries
used TLS. The dynamic loader was not considering that the audit
libraries would use TLS and failed to bump the TLS generation
counter leaving TLS usage inconsistent after loading the audit
libraries.
https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
Shifting into the sign position is currently supported as a GCC
extension, but explicitly subjected to future changes. Computation
in the unsigned type followed by a cast to the signed type is a GCC
extension that will be available forever.
Now the ARM port implements pointer encryption for jmpbufs, gdb needs
a SystemTap probe point in longjmp to determine the target PC of
a call to longjmp. This patch implements the probe point in longjmp
and a similar probe point in setjmp.
In order to have all the appropriate registers available to pass to the
probe this reorders the layout of jmpbuf, putting the sp and lr registers
at the start rather than the end, allowing them to be read and
written sequentially.
Tested on armv7, no new failures in the glibc testsuite and confirmed
that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite.
ChangeLog:
2014-02-25 Will Newton <will.newton@linaro.org>
* sysdeps/arm/__longjmp.S: Include stap-probe.h.
(__longjmp): Restore sp and lr before restoring callee
saved registers. Add longjmp and longjmp_target
SystemTap probe point.
* sysdeps/arm/bits/setjmp.h (__jmp_buf): Update comment.
* sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP):
Define to zero to match jmpbuf layout.
* sysdeps/arm/setjmp.S: Include stap-probe.h.
(__sigsetjmp): Save sp and lr before saving callee
saved registers. Add setjmp SystemTap probe point.
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually
being included due to the guard overlap, and getauxval becomes an
implicit declaration and implicit pointer conversion which means, at
best, the test isn't actually testing what it thinks it is and, at
worst, it'll crash and burn on platforms where implict pointer
conversion is a Very Bad Thing.
* sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a
synonym for _SYS_AUXV_H to allow direct inclusion.
* sysdeps/sparc/bits/hwcap.h: Likewise.
* sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of
_SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together.
* sysdeps/sparc/sysdep.h: Likewise.
Similar to the issues for accept4 and recvmmsg, __ASSUME_SENDMMSG is
also confused about whether it relates to function availability or
socketcall operation availability, and the conditions for the
definition are always wrong (sendmmsg appeared in Linux kernel 3.0,
not 2.6.39); this is now bug 16611.
This patch splits the macro into separate macros like those for
accept4 and recvmmsg, defining them for appropriate kernel versions.
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
[BZ #16611]
* sysdeps/unix/sysv/linux/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000 && __ASSUME_SOCKETCALL]
(__ASSUME_SENDMMSG_SOCKETCALL): Define.
[__LINUX_KERNEL_VERSION >= 0x030000 && (__i386__ || __x86_64__ ||
__powerpc__ || __sh__ || __sparc__)] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__i386__ || __powerpc__ || __sh__ || __sparc__]
(__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL): Likewise.
[__ASSUME_SENDMMSG_SOCKETCALL || __ASSUME_SENDMMSG_SYSCALL]
(__ASSUME_SENDMMSG): Define instead of using previous
[__LINUX_KERNEL_VERSION >= 0x020627] condition.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_SENDMMSG_SYSCALL): Define.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030200] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/internal_sendmmsg.S [__ASSUME_SOCKETCALL
&& !__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine.
[__ASSUME_SENDMMSG]: Change conditionals to
[__ASSUME_SENDMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_SENDMMSG_SYSCALL):
Define.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c [__ASSUME_SOCKETCALL &&
!__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine.
[!__ASSUME_SENDMMSG]: Change conditional to
[!__ASSUME_SENDMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/tile/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Define.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL):
Define.
Similar to the issues for accept4, __ASSUME_RECVMMSG is also confused
about whether it relates to function availability or socketcall
operation availability; this is now bug 16610.
Nothing actually tests __ASSUME_RECVMMSG for function availability,
but implicit in the definition in kernel-features.h is the idea that
it makes sense when the syscall is available and socketcall is not
being used. As with accept4, there are architectures where the
syscall was added later than the socketcall operation, meaning that
assuming glibc is built with recent enough kernel headers, it does not
attempt to use socketcall for these operations and __ASSUME_RECVMMSG
gets defined for kernels >= 2.6.33 even when the syscall was only
added later.
This patch splits the macro into separate macros like those used for
accept4; having similar macro structure in both cases (and for
sendmmsg once I've dealt with that) seems likely to be less confusing
than having a different structure on the basis of nothing actually
needing to assume the recvmmsg function works. Appropriate
definitions are added for all architectures.
Architecture-specific note: Tile's kernel-features.h says "TILE glibc
support starts with 2.6.36", which is accurate in that 2.6.36 was the
first kernel version with Tile support, and on that basis I've made
that header define __ASSUME_RECVMMSG_SYSCALL unconditionally.
However, Tile's configure.ac has arch_minimum_kernel=2.6.32. Since
arch_minimum_kernel is meant to reflect only kernel.org kernel
versions, I think that should change to 2.6.36. (If using glibc with
kernel versions from before a port went in kernel.org, it's your
responsibility to change arch_minimum_kernel in a local patch, and at
the same time to adjust any __ASSUME_* definitions that may not be
correct for your older kernel; for developing the official glibc it
should only ever be necessary to consider what official kernel.org
releases support.)
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
[BZ #16610]
* sysdeps/unix/sysv/linux/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621 && __ASSUME_SOCKETCALL]
(__ASSUME_RECVMMSG_SOCKETCALL): Define.
[(__LINUX_KERNEL_VERSION >= 0x020621 && (__i386__ || __x86_64__ ||
__sparc__)) || (__LINUX_KERNEL_VERSION >= 0x020625 && (__powerpc__
|| __sh__))] (__ASSUME_RECVMMSG_SYSCALL): Likewise.
[__i386__ || __sparc__]
(__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL): Likewise.
[__ASSUME_RECVMMSG_SOCKETCALL || __ASSUME_RECVMMSG_SYSCALL]
(__ASSUME_RECVMMSG): Define instead of using previous
[__LINUX_KERNEL_VERSION >= 0x020621] condition.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Define.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/internal_recvmmsg.S [__ASSUME_SOCKETCALL
&& !__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_RECVMMSG_SYSCALL] (__NR_recvmmsg): Undefine.
[__ASSUME_RECVMMSG]: Change condition to
[__ASSUME_RECVMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Define.
(__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c [__ASSUME_SOCKETCALL &&
!__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_RECVMMSG_SYSCALL] (__NR_recvmmsg): Undefine.
[!__ASSUME_RECVMMSG]: Change condition to
[!__ASSUME_RECVMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Define.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020622] (__ASSUME_RECVMMSG_SYSCALL):
Define.
In <https://sourceware.org/ml/libc-alpha/2013-12/msg00008.html>,
Aurelien noted issues with the definition of __ASSUME_ACCEPT4, which I
discussed in more detail in
<https://sourceware.org/ml/libc-alpha/2013-12/msg00014.html>; these
are now bug 16609.
As previously noted, __ASSUME_ACCEPT4 is used in two ways:
* In OS-independent code, to mean "accept4 can be assumed to work
rather than fail with ENOSYS". It doesn't matter whether it's
implemented with socketcall or a separate syscall.
* In Linux-specific code, to mean "the socketcall multiplex syscall
can be assumed to handle the accept4 operation. When used in
Linux-specific code, it *never* refers to anything relating to the
accept4 syscall, only to the socketcall multiplexer.
This patch splits the macro into separate __ASSUME_ACCEPT4_SOCKETCALL,
__ASSUME_ACCEPT4_SYSCALL and __ASSUME_ACCEPT4 to clarify the different
cases involved. A macro __ASSUME_SOCKETCALL is added for convenience
in writing logic relating to all socketcall architectures. In
addition, to address the issue of architectures where socketcall
support for accept4 was added before a separate syscall was added (and
so the separate syscall should not be used unless known to be present
or fallback to socketcall is available), a fourth macro
__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL is added to indicate that the
syscall became available at the same time as socketcall support. This
is then used in the relevant places in a conditional determining
whether to undefine __NR_accept4 (the simple approach to avoiding the
syscall's presence causing problems; I didn't try to implement runtime
fallback from the syscall to socketcall).
Architecture-specific note: alpha defined __ASSUME_ACCEPT4 for 2.6.33
and later, but actually the syscall was added for alpha in 3.2, so
this patch uses the correct condition for __ASSUME_ACCEPT4_SYSCALL
there.
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
[BZ #16609]
* sysdeps/unix/sysv/linux/kernel-features.h [__i386__ ||
__powerpc__ || __s390__ || __sh__ || __sparc__]
(__ASSUME_SOCKETCALL): Define.
[__LINUX_KERNEL_VERSION && __ASSUME_SOCKETCALL]
(__ASSUME_ACCEPT4_SOCKETCALL): Likewise.
[(__LINUX_KERNEL_VERSION >= 0x02061c && (__x86_64__ || __sparc__))
|| (__LINUX_KERNEL_VERSION >= 0x020625 && (__powerpc__ ||
__sh__))] (__ASSUME_ACCEPT4_SYSCALL): Likewise.
[__sparc__] (__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL): Likewise.
[__ASSUME_ACCEPT4_SOCKETCALL || __ASSUME_ACCEPT4_SYSCALL]
(__ASSUME_ACCEPT4): Define instead of using previous
[__LINUX_KERNEL_VERSION >= 0x02061c && (__i386__ || __x86_64__ ||
__powerpc__ || __sparc__ || __s390__)] condition.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/accept4.c [__ASSUME_SOCKETCALL &&
!__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_ACCEPT4_SYSCALL] (__NR_accept4): Undefine.
[!__ASSUME_ACCEPT4]: Change condition to
[!__ASSUME_ACCEPT4_SOCKETCALL].
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. Correct
condition to [__LINUX_KERNEL_VERSION >= 0x030200].
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020624] (__ASSUME_ACCEPT4): Change to
__ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/i386/accept4.S [__ASSUME_ACCEPT4]:
Change conditions to [__ASSUME_ACCEPT4_SOCKETCALL].
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_ACCEPT4): Change to
__ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/internal_accept4.S [__ASSUME_SOCKETCALL
&& !__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_ACCEPT4_SYSCALL] (__NR_accept4): Undefine.
[__ASSUME_ACCEPT4]: Change condition to
[__ASSUME_ACCEPT4_SOCKETCALL].
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_SOCKETCALL): Define.
[__LINUX_KERNEL_VERSION >= 0x02061c] (__ASSUME_ACCEPT4): Remove.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKETCALL): Define.
(__ASSUME_ACCEPT4): Remove.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_ACCEPT4_SYSCALL):
Define.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x02061f] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020622] (__ASSUME_ACCEPT4_SYSCALL):
Define.
This patch updates the ARM HWCAP data (both bits/hwcap.h and
dl-procinfo.[ch]) to match Linux 3.13.
* sysdeps/unix/sysv/linux/arm/bits/hwcap.h (HWCAP_ARM_VFPD32): New
macro.
(HWCAP_ARM_LPAE): Likewise.
(HWCAP_ARM_EVTSTRM): Likewise.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.c (_dl_arm_cap_flags):
Add vpfd32, lpae and evtstrm.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_DL_HWCAP_COUNT):
Increase to 22.
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch moves tests of fma to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Because fma can have exact zero results depending on the rounding
mode, results of fma cannot always be determined from a single value
computed in higher precision with a sticky bit. Thus, this patch adds
support for recomputing results with the original MPFR/MPC function in
the case where an exact zero is involved. (This also affects some
results for cpow; when we start testing cpow in all rounding modes, I
think it will be most appropriate to make those tests use
IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs
of zero results, or special caes in general, for cpow, and I think
signs of zero for cpow are beyond the scope of glibc's accuracy
goals.)
Simply treating the existing test inputs for fma like those for other
functions (i.e., as representing the given value rounded up or down to
any of the supported floating-point formats) increases the size of
auto-libm-test-out by about 16MB (i.e., about half the file is fma
test data). While rounded versions of tests are perfectly reasonable
test inputs for fma, in this case having them seems excessive, so this
patch allows functions to specify in gen-auto-libm-tests that the
given test inputs are only to be interpreted exactly, not as
corresponding to values rounded up and down. This reduces the size of
the generated test data for fma to a more reasonable 2MB.
A consequence of this patch is that fma is now tested for correct
presence or absence of "inexact" exceptions, where previously this
wasn't tested because I didn't want to try to add that test coverage
manually to all the existing tests. As far as I know, the existing
fma implementations are already correct in this regard.
This patch provides the first cases where the gen-auto-libm-tests
support for distinguishing before-rounding/after-rounding underflow
actually produces separate entries in auto-libm-test-out (for
functions without exactly determined results, the affected cases are
all considered underflow-optional, so this only affects functions like
fma with exactly determined results). I didn't see any signs of
problems with this logic in the output.
Tested x86_64 and x86.
* math/auto-libm-test-in: Add tests of fma.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f.
(fma_towardzero_test_data): Likewise.
(fma_downward_test_data): Likewise.
(fma_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (rounding_mode_desc): Add field
mpc_mode.
(rounding_modes): Add values for new field.
(func_calc_method): Add value mpfr_fff_f.
(func_calc_desc): Add mpfr_fff_f union field.
(test_function): Add field exact_args.
(FUNC): Add macro argument EXACT_ARGS.
(FUNC_mpfr_f_f): Update call to FUNC.
(FUNC_mpfr_f_f): Likewise.
(FUNC_mpfr_ff_f): Likewise.
(FUNC_mpfr_if_f): Likewise.
(FUNC_mpc_c_f): Likewise.
(FUNC_mpc_c_c): Likewise.
(test_functions): Add fma. Update calls to FUNC.
(handle_input_arg): Add argument exact_args.
(add_test): Update call to handle_input_arg.
(calc_generic_results): Add argument mode. Handle mpfr_fff_f.
(output_for_one_input_case): Update call to calc_generic_results.
Recalculate exact zero results in each rounding mode.
gen-auto-libm-tests has a bug in the logic for setting a sticky bit
based on the ternary value from MPFR: it is correct for positive
results, but for negative results mpz_setbit acts as if a two's
complement representation is used, whereas the low bit needs setting
based on the sign-magnitude representation GMP actually uses. (This
showed up in converting fma tests to use auto-libm-test-in /
gen-auto-libm-tests.)
This patch fixes the problem by negating the mpz_t value to set its
low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp
fixes to ldbl-128 expected results), but only a few ulps updates are
needed on x86 / x86_64. In one case, a corrected expectation showed
up a spurious underflow exception where the correct result is slightly
outside the underflowing range.
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c (adjust_real): Ensure integers are
non-negative before setting low bit.
* math/auto-libm-test-in: Mark one asin test possibly having
spurious underflow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Carlos O'Donell
Adhemerval Zanella
Rajalakshmi Srinivasaraghavan
Ondřej Bílka
Roland McGrath
Siddhesh Poyarekar
Joey Ye
Joseph Myers
Steve Ellcey
Florian Weimer
Will Newton
Stefan Liebler
Andreas Schwab
Yury Gribov
Andreas Schwab
Adam Conrad
David Holsgrove