This patch XFAILs one test where the powerpc32 ucontext_t has the
wrong type of a field, to allow the conform/ tests as a whole to pass
once the namespace issues are fixed.
Tested with build-many-glibcs.py.
[BZ #21635]
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (uc_mcontext): XFAIL for
powerpc32-linux.
* conform/data/ucontext.h-data (uc_mcontext): Likewise.
This patch XFAILs one test where the ia64 ucontext_t has the wrong
type of a field, to allow the conform/ tests as a whole to pass once
the namespace issues are fixed.
Tested with build-many-glibcs.py.
[BZ #21634]
* sysdeps/unix/sysv/linux/ia64/Makefile [$(subdir) = conform]
(conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (uc_sigmask): XFAIL for ia64-linux.
* conform/data/ucontext.h-data (uc_sigmask): Likewise.
bsd_signal was added in XPG4.2, so should be declared for
__USE_XOPEN_EXTENDED, instead of the present __USE_XOPEN condition.
This patch fixes the condition accordingly.
Tested for x86_64.
[BZ #21552]
* signal/signal.h (bsd_signal): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
* conform/Makefile (test-xfail-XPG4/signal.h/conform): Remove.
In sys/wait.h, waitid and associated constants and types are UX-shaded
in XPG4.2 (so not in XPG4), and XSI-shaded in POSIX before 2008, so
should be appropriately conditional in the headers. This patch fixes
the conditionals accordingly. (WCONTINUED is actually still
XSI-shaded in POSIX.1:2008, but W* is also reserved there without
XSI-shading, so nothing special needs to be done about the
conditionals on WCONTINUED to conform to POSIX.1:2008 namespace
rules.)
Tested for x86_64.
[BZ #21561]
* posix/sys/wait.h (idtype_t): Change [__USE_XOPEN] condition to
[__USE_XOPEN_EXTENDED].
(id_t): Likewise.
(include of <bits/types/siginfo_t.h): Likewise.
(waitid): Likewise.
* sysdeps/unix/sysv/linux/bits/waitflags.h (WSTOPPED): Condition
on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8].
(WEXITED): Likewise.
(WCONTINUED): Likewise.
(WNOWAIT): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
This patch corrects the conformtest expectations for sys/wait.h for
XPG4. This does not change the test results for this header at the
makefile level since it fixes some spurious failures for this header
while introducing other failures previously hidden by incorrect
expectations. However, it shows up issues with stdlib.h for XPG4
defining W* names that are not permitted in this case (previously
wrongly allowed; the W* reservation is UX-shaded in XPG4.2 /
XSI-shaded in POSIX before 2008); that test is thus XFAILed.
Tested for x86_64.
* conform/data/sys/wait.h-data (WIFCONTINUED): Do not expect for
[XPG4].
(WEXITED): Likewise.
(WSTOPPED): Likewise.
(WCONTINUED): Likewise.
(WNOHANG): Likewise.
(WNOWAIT): Likewise.
(idtype_t): Likewise.
(P_ALL): Likewise.
(P_PID): Likewise.
(P_PGID): Likewise.
(id_t): Likewise.
(siginfo_t): Likewise.
(wait3): Likewise.
(waitid): Likewise.
(signal.h): Do not allow header for [XPG4].
(sys/resource.h): Likewise.
(si_*): Do not allow for [XPG4].
(W*): Likewise.
(P_*): Likewise.
(BUS_): Likewise.
(CLD_): Likewise.
(FPE_): Likewise.
(ILL_): Likewise.
(POLL_): Likewise.
(SEGV_): Likewise.
(SI_): Likewise.
(TRAP_): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): New
variable.
Various of the signal.h conform/ failures for XPG4 and XPG42 are
actually the result of incorrect test expectations rather than header
bugs. This patch fixes the expectations to accord with those
standards (this does not however allow any XFAILs to be removed, as
some header bugs remain). Note for anyone comparing with the
standards: corrigendum U013/16 removes the mention of a sigmask
function in signal.h (C435 lists such a function in the definition of
signal.h, but without any actual specification for the function
itself), so sigmask is not included in the expectations.
Tested for x86_64.
* conform/data/signal.h-data (sa_sigaction): Do not expect for
[XPG4].
(SA_SIGINFO): Likewise.
(SA_ONSTACK): Likewise.
(SA_RESETHAND): Likewise.
(SA_RESTART): Likewise.
(SA_NOCLDWAIT): Likewise.
(SA_NODEFER): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
(MINSIGSTKSZ): Likewise.
(SIGSTKSZ): Likewise.
(ucontext_t): Likewise.
(stack_t): Likewise.
(struct sigstack): Likewise.
(SI_USER): Do not expect for [XPG4 || XPG42].
(SI_QUEUE): Likewise.
(SI_TIMER): Likewise.
(SI_ASYNCIO): Likewise.
(SI_MESGQ): Likewise.
(bsd_signal): Do not expect for [XPG4].
(killpg): Likewise.
(sigaltstack): Likewise.
(sighold): Likewise.
(sigignore): Likewise.
(siginterrupt): Likewise.
(sigpause): Likewise.
(sigrelse): Likewise.
(sigset): Likewise.
(sigwait): Do not expect for [XPG4 || XPG42].
The sigstack function was removed in the 2001 edition of POSIX, and
the sigstack structure in the 2008 edition. signal.h wrongly includes
those declarations even for newer POSIX versions. This patch fixes
the conditions, and conform/ expectations, accordingly.
This patch makes the minimum change to when these declarations are
present, leaving them visible for __USE_MISC as they would previously
have been visible by default. Arguably these legacy declarations
should only be visible when an old standard is specifically requested,
but implementing that would require arranging for the various sigstack
implementations to be able to see the struct sigstack type despite it
not being in _GNU_SOURCE in that case.
Tested for x86_64.
[BZ #21511]
* signal/signal.h: Include <bits/types/struct_sigstack.h> only if
[(__USE_XOPEN_EXTENDED && !__USE_XOPEN2K8) || __USE_MISC].
(sigstack): Declare only if [(__USE_XOPEN_EXTENDED &&
!__USE_XOPEN2K) || __USE_MISC].
* conform/data/signal.h-data (struct sigstack): Expect type only
if [!XOPEN2K8 && !POSIX2008].
(sigstack): Expect function only if [XPG42 || UNIX98].
conform/ namespace tests of arpa/inet.h, netdb.h and netinet/in.h fail
for UNIX98 and XPG42 because of inclusion of stdint.h, which defines
macros not permitted in those headers for those standards. UNIX98
allows them to include inttypes.h, but (predating C99) has restricted
inttypes.h contents (not yet tested in the conform/ tests) not
including those macros; XPG4.2 has no such permission and no
inttypes.h / stdint.h at all.
This patch rearranges the headers to avoid this issue. intN_t
definitions move to bits/stdint-intn.h, and uintN_t definitions to
bits/stdint-uintn.h. (These are not bits/types/ headers because they
each define four types. They are separate rather than just a single
header because sys/types.h defines intN_t but u_intN_t rather than
uintN_t - and while sys/types.h could define uintN_t because of the
POSIX reservation of *_t, existing practice there is largely to
condition types on appropriate feature test macros, and indeed there
is at least one open bug report (14553) about a type that's not
so-conditioned, so maybe types there should actually have conditions
added where appropriate.) The affected network headers are then made
to include bits/stdint-uintn.h instead of stdint.h. This allows six
XFAILs to be removed.
This doesn't do anything about inttypes.h defining more than it should
for UNIX98, but we don't have conformtest expectations for that case
at present (and my inclination is that a fix for that should be as
local as possible - affecting only inttypes.h, not stdint.h, only for
the case of __USE_UNIX98 && !__USE_ISOC99).
Tested for x86_64.
[BZ #21455]
* bits/stdint-intn.h: New file.
* bits/stdint-uintn.h: Likewise.
* stdlib/Makefile (headers): Add bits/stdint-intn.h and
bits/stdint-uintn.h.
* inet/netinet/in.h: Include <bits/stdint-uintn.h> instead of
<stdint.h>.
* posix/sys/types.h: Include <bits/stdint-intn.h>.
(__int8_t_defined): Do not define here.
(int8_t): Likewise.
(int16_t): Likewise.
(int32_t): Likewise.
(int64_t): Likewise.
[__GNUC_PREREQ (2, 7)] (__intN_t): Likewise.
* resolv/netdb.h: Include <bits/stdint-uintn.h> instead of
<stdint.h>.
* include/netdb.h [_ISOMAC]: Do not include <stdint.h>.
* sysdeps/generic/stdint.h: Include <bits/stdint-intn.h> and
<bits/stdint-uintn.h>.
(int8_t): Do not define here.
(int16_t): Likewise.
(int32_t): Likewise.
(int64_t): Likewise.
(uint8_t): Likewise.
(uint16_t): Likewise.
(uint32_t): Likewise.
(uint64_t): Likewise.
* conform/Makefile (test-xfail-XPG42/arpa/inet.h/conform): Remove
variable.
(test-xfail-XPG42/netdb.h/conform): Likewise.
(test-xfail-XPG42/netinet/in.h/conform): Likewise.
(test-xfail-UNIX98/arpa/inet.h/conform): Likewise.
(test-xfail-UNIX98/netdb.h/conform): Likewise.
(test-xfail-UNIX98/netinet/in.h/conform): Likewise.
POSIX.1:2001 added sem_timedwait, but said nothing about defining
struct timespec in semaphore.h. The 2008 edition added a
corresponding permission to include <time.h> from <semaphore.h>.
Since this is the normal POSIX approach in such cases, it seems
appropriate to consider this a bug fix, and so this patch makes the
conform/ tests allow that inclusion for POSIX.1:2001 as well.
Tested for x86_64.
* conform/data/semaphore.h-data [XOPEN2K] (time.h): Allow header
inclusion.
* conform/Makefile (test-xfail-XOPEN2K/semaphore.h/conform):
Remove.
The conform/ tests test -D_XOPEN_SOURCE under the name "XPG3", and
-D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED under the name "XPG4".
That naming is misleading. _XOPEN_SOURCE_EXTENDED actually means
XPG4.2, including UX-shaded interfaces. _XOPEN_SOURCE actually means
XPG4, or XPG4.2 without UX-shaded interfaces. (Prior XPG versions
also used _XOPEN_SOURCE, but without any versioning of the values of
the macro, so XPG4.2 without UX-shaded interfaces is the only sensible
set of interfaces for glibc to expose given _XOPEN_SOURCE=1 without
_XOPEN_SOURCE_EXTENDED defined.)
This patch fixes the naming in the conform/ tests, so that what is now
called XPG4 is changed to XPG42, and what is now called XPG3 is
changed to XPG4.
Tested for x86_64 (and verified the complete set of expectations is
unchanged by the patch beyond the intended renaming).
* conform/GlibcConform.pm (XPG4): Rename standard to XPG42.
(XPG3): Rename standard to XPG4.
* conform/Makefile: Likewise.
* conform/list-header-symbols.pl: Likewise.
* conform/data/aio.h-data: Likewise.
* conform/data/arpa/inet.h-data: Likewise.
* conform/data/complex.h-data: Likewise.
* conform/data/ctype.h-data: Likewise.
* conform/data/dlfcn.h-data: Likewise.
* conform/data/fcntl.h-data: Likewise.
* conform/data/fenv.h-data: Likewise.
* conform/data/float.h-data: Likewise.
* conform/data/fmtmsg.h-data: Likewise.
* conform/data/ftw.h-data: Likewise.
* conform/data/grp.h-data: Likewise.
* conform/data/inttypes.h-data: Likewise.
* conform/data/iso646.h-data: Likewise.
* conform/data/langinfo.h-data: Likewise.
* conform/data/libgen.h-data: Likewise.
* conform/data/limits.h-data: Likewise.
* conform/data/locale.h-data: Likewise.
* conform/data/math.h-data: Likewise.
* conform/data/mqueue.h-data: Likewise.
* conform/data/ndbm.h-data: Likewise.
* conform/data/net/if.h-data: Likewise.
* conform/data/netdb.h-data: Likewise.
* conform/data/netinet/in.h-data: Likewise.
* conform/data/poll.h-data: Likewise.
* conform/data/pthread.h-data: Likewise.
* conform/data/pwd.h-data: Likewise.
* conform/data/sched.h-data: Likewise.
* conform/data/search.h-data: Likewise.
* conform/data/semaphore.h-data: Likewise.
* conform/data/signal.h-data: Likewise.
* conform/data/spawn.h-data: Likewise.
* conform/data/stdbool.h-data: Likewise.
* conform/data/stdint.h-data: Likewise.
* conform/data/stdio.h-data: Likewise.
* conform/data/stdlib.h-data: Likewise.
* conform/data/string.h-data: Likewise.
* conform/data/strings.h-data: Likewise.
* conform/data/stropts.h-data: Likewise.
* conform/data/sys/mman.h-data: Likewise.
* conform/data/sys/resource.h-data: Likewise.
* conform/data/sys/select.h-data: Likewise.
* conform/data/sys/socket.h-data: Likewise.
* conform/data/sys/stat.h-data: Likewise.
* conform/data/sys/statvfs.h-data: Likewise.
* conform/data/sys/time.h-data: Likewise.
* conform/data/sys/timeb.h-data: Likewise.
* conform/data/sys/types.h-data: Likewise.
* conform/data/sys/uio.h-data: Likewise.
* conform/data/sys/un.h-data: Likewise.
* conform/data/sys/wait.h-data: Likewise.
* conform/data/syslog.h-data: Likewise.
* conform/data/termios.h-data: Likewise.
* conform/data/tgmath.h-data: Likewise.
* conform/data/time.h-data: Likewise.
* conform/data/ucontext.h-data: Likewise.
* conform/data/unistd.h-data: Likewise.
* conform/data/utmpx.h-data: Likewise.
* conform/data/varargs.h-data: Likewise.
* conform/data/wchar.h-data: Likewise.
* conform/data/wctype.h-data: Likewise.
sys/socket.h includes sys/uio.h to get the definition of the iovec
structure.
POSIX allows sys/socket.h to make all sys/uio.h symbols visible.
However, all of sys/uio.h is XSI-shaded, so for non-XSI POSIX this
results in conformtest failures (for sys/socket.h and other headers
that include it):
Namespace violation: "UIO_MAXIOV"
Namespace violation: "readv"
Namespace violation: "writev"
Now, there is some ambiguity in POSIX about what namespace
reservations apply in this case - see
http://austingroupbugs.net/view.php?id=1127 - but glibc convention
would still avoid declaring readv and writev, for example, for feature
test macros that don't include them (if only headers from the relevant
standard are included), even if such declarations are permitted, so
there is a bug here according to glibc conventions.
This patch moves the struct iovec definition to a new
bits/types/struct_iovec.h header and includes that from sys/socket.h
instead of including the whole of sys/uio.h. This fixes the namespace
issue; however, three files in glibc that were relying on the implicit
inclusion needed to be updated to include sys/uio.h explicitly. So
there is a question of whether sys/socket.h should continue to include
sys/uio.h under some conditions, such as __USE_XOPEN or __USE_MISC or
__USE_XOPEN || __USE_MISC, for greater compatibility with code that
(wrongly) expects this optional inclusion to be present there. (I
think the three affected files in glibc should still have explicit
sys/uio.h inclusions added in any case, however.)
Tested for x86_64.
[BZ #21426]
* misc/bits/types/struct_iovec.h: New file.
* misc/Makefile (headers): Add bits/types/struct_iovec.h.
* include/bits/types/struct_iovec.h: New file.
* bits/uio.h (struct iovec): Replace by inclusion of
<bits/types/struct_iovec.h>.
* sysdeps/unix/sysv/linux/bits/uio.h (struct iovec): Likewise.
* socket/sys/socket.h: Include <bits/types/struct_iovec.h> instead
of <sys/uio.h>.
* nptl/tst-cancel4.c: Include <sys/uio.h>
* posix/test-errno.c: Likewise.
* support/resolv_test.c: Likewise.
* conform/Makefile (test-xfail-POSIX2008/arpa/inet.h/conform):
Remove.
(test-xfail-POSIX2008/netdb.h/conform): Likewise.
(test-xfail-POSIX2008/netinet/in.h/conform): Likewise.
(test-xfail-POSIX2008/sys/socket.h/conform): Likewise.
The conformtest expectations in sys/socket.h are missing the standard
POSIX allowance for all headers to define *_t names. For XSI standard
versions that allowance comes in via the permission to include
<sys/uio.h> (for which the expectations properly allow *_t), but for
non-XSI POSIX nothing brings in that allowance and spurious namespace
failures occur. This patch adds the required permission to the
expectations to remove the spurious failures (by itself this does not
allow any XFAILs to be removed).
Tested for x86_64.
* conform/data/sys/socket.h-data (*_t): Allow.
This patch enables the compilation part of the conformtest tests (the
vast bulk of them) when cross compiling, so making it easy to run them
across many configurations with build-many-glibcs.py.
Tested with build-many-glibcs.py.
* conform/Makefile (tests-special): Do not make addition of
$(conformtest-header-tests) conditional on [$(cross-compiling) = no].
(generated): Do not make addition of $(conformtest-header-base)
conditional on [$(cross-compiling) = no].
POSIX specifies long as the type of elements of struct mq_attr. For
x32, they are __syscall_slong_t (i.e. long long). This patch XFAILs
the corresponding tests for x32 in the conformtest expectations (the
bug should not be closed without an actual fix).
Tested with build-many-glibcs.py.
[BZ #21279]
* sysdeps/unix/sysv/linux/x86_64/x32/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): Update comment.
* conform/data/mqueue.h-data (mq_attr.mq_flags): XFAIL for
x86_64-x32-linux.
(mq_attr.mq_maxmsg): Likewise.
(mq_attr.mq_msgsize): Likewise.
(mq_attr.mq_curmsgs): Likewise.
MIPS o32 struct stat has the wrong type of st_rdev. This patch XFAILs
that test in the conformtest expectations for this case (the bug
should not be closed without an actual fix, however).
Tested with build-many-glibcs.py.
[BZ #21278]
* sysdeps/unix/sysv/linux/mips/mips32/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): Update comment.
* conform/data/sys/stat.h-data (stat.st_rdev): XFAIL for
mips-o32-linux.
This patch XFAILs the conformtest tv_nsec tests for x32 so that the
incorrect type does not potentially hide other failures. As this is
not a fix for the bug, it should remain open in Bugzilla.
Tested (compilation only) with build-many-glibcs.py.
[BZ #16437]
* sysdeps/unix/sysv/linux/x86_64/x32/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (timespec.tv_nsec): XFAIL for
x86_64-x32-linux.
* conform/data/sys/select.h-data (timespec.tv_nsec): Likewise.
* conform/data/sys/stat.h-data (timespec.tv_nsec): Likewise.
* conform/data/time.h-data (timespec.tv_nsec): Likewise.
This patch fixes the conformtest handling of headers listed in
allow-header to process xfail[cond]- in the expectations for those
headers.
Tested with build-many-glibcs.py.
* conform/conformtest.pl: Handle xfail[cond]- in header mentioned
with allow-header.
As noted in bug 17786, MIPS o32 struct stat has the wrong type of
st_dev. This patch XFAILs that test in the conformtest expectations
for this case (the test still fails after the patch because there's
also a similar issue for st_rdev that needs reporting and XFAILing
separately, and the bug should not be closed without an actual fix,
not just XFAILing).
Tested for mips with build-many-glibcs.py.
[BZ #17786]
* sysdeps/unix/sysv/linux/mips/mips32/Makefile: New file.
* conform/data/sys/stat.h-data (stat.st_dev): XFAIL for
mips-o32-linux.
As noted in bug 21260, sysdeps/unix/sysv/linux/alpha/bits/netdb.h
defines struct netent with n_net of type unsigned long instead of the
correct uint32_t. This patch XFAILs that test in the conformtest
expectations for alpha. (This is not a fix for the bug, and it should
not be closed without an actual fix.)
Tested for alpha with build-many-glibcs.py.
[BZ #21260]
* sysdeps/unix/sysv/linux/alpha/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): New variable.
This patch makes conformtest skip execution tests when
cross-compiling, as an interim step towards running most of these
tests (presently disabled) in that case. It omits the (obvious)
Makefile change to actually enable the conformtest tests when
cross-compiling, as there are still enough failures seen with
build-many-glibcs.py that I'd like to get the results cleaner before
enabling these tests.
Tested for x86_64, and with the tests actually enabled for
cross-compilation with build-many-glibcs.py.
* conform/conformtest.pl ($cross): New variable.
(--cross): New command-line option.
(runtest): Skip test execution when cross-compiling.
* conform/Makefile (conformtest-cross): New variable.
($(conformtest-header-tests)): Pass $(conformtest-cross) to
conformtest.pl.
conformtest has an internal XFAIL mechanism to allow failures of
individual expectations to be ignored, so that known hard-to-fix
failures (e.g. those affecting ABIs or requiring kernel changes) do
not cause the overall tests to FAIL and so hide other failures from
the same (header, standard) pair.
Various such bugs are system-specific, so this patch adds a mechanism
to allow system-specific XFAILs. A system-independent XFAIL is
achieved by putting "xfail-" at the start of the relevant expectation
in the *-data files. A system-specific XFAIL instead uses
"xfail[cond]-", where "cond" is a condition listed in
conformtest-xfail-conds in a sysdeps makefile (so one for x32 might
set conformtest-xfail-conds = x86_64-x32-linux, for example, and then
an expectation for tv_nsec's type could use
xfail[x86_64-x32-linux]-). The actual names are arbitrary, just
needing to match between the makefiles and the expectations, and if
necessary you can use "xfail[cond1|cond2]-" for a test that is
expected to fail under multiple conditions. As with
system-independent XFAILs, I think system-specific ones should have a
bug filed in Bugzilla and a comment referencing that bug.
Tested for x86_64, including with test expectations and makefiles
changed to use the new facility.
* conform/conformtest.pl ($xfail_str): New variable.
(--xfail=): New command-line option.
(top level): Handle expectations starting xfail[cond]-.
* conform/Makefile (conformtest-xfail): New variable.
($(conformtest-header-tests)): Pass $(conformtest-xfail) to
conformtest.pl.
The conformtest header tests test some things through compilation
tests and others through execution tests. This patch makes more of
the tests into compilation tests, using _Static_assert (note: for
float.h tests on floating-point values this is depending on a GNU
extension, that those assertions are allowed in the absence of
-pedantic although they aren't strictly integer constant expressions).
The remaining execution tests are for values of things listed as
"symbol" (in fact no such things have a value expectation listed) and
for values of macros defined as string constants (three such values
listed in total).
This is intended as preparation for enabling the vast bulk of the
tests to run for cross compilation. (Even the few remaining execution
tests ought in principle to run for cross compilation when a test
wrapper is defined, but that's more complicated. The existing
execution tests for native builds in fact are linked and run with an
existing installed libc that's required to exist to link against,
rather than with the newly built libc; only the new headers are used.)
Tested for x86_64.
* conform/conformtest.pl: Use compilation instead of execution
tests for testing values of constants and usability in #if.
When I set up linknamespace testing, the lists of libraries that might
contain functions from various standards were based on the -l options
POSIX says may be required to find certain functions with the c99
utility.
glibc has some POSIX functions in the libdl and libcrypt libraries,
not mentioned in the definition of the c99 utility (so an
implementation of that utility using glibc would need to use -ldl
-lcrypt automatically). This patch adds those libraries to the ones
considered in linknamespace testing for relevant standards. (The
crypt functions are XSI only, present in XPG3 and above; the libdl
ones were added in UNIX98, then moved from XSI to BASE in the 2008
edition of POSIX.)
* conform/Makefile (linknamespace-libs): Rename to
linknamespace-libs-thr.
(linknamespace-libs-posix): New variable.
(linknamespace-libs-xsi): Likewise.
(linknamespace-libs-XPG3): Include libcrypt.a.
(linknamespace-libs-XPG4): Use $(linknamespace-libs-XPG3).
(linknamespace-libs-POSIX): Use $(linknamespace-libs-thr).
(linknamespace-libs-UNIX98): Use $(linknamespace-libs-xsi).
(linknamespace-libs-XOPEN2K): Likewise.
(linknamespace-libs-XOPEN2K8): Likewise.
(linknamespace-libs-POSIX2008): Use $(linknamespace-libs-posix).
Having found that with my script to build many glibc variants I could
reproduce the linknamespace test failures in parallel builds (that
various people had previously reported but I hadn't seen myself), I
investigated those failures further. This patch adds a missing
dependency to those tests.
Tested for x86_64, including the configuration where I saw those
failures and where I don't see them with this patch.
* conform/Makefile ($(linknamespace-header-tests)): Also depend on
$(linknamespace-symlists-tests).
Historically perl includes the current directory in the module search
path. Over the time this has been considered as a security issue and
the recent vulnerabilities [1] made people to reconsider this behaviour.
It is almost sure that this will be removed in the future [2], possibly
for the 5.26 release, although this is not yet firmly decided.
Debian has decided to backport the patches [3], so the perl binary in
unstable do not have '.' in @INC anymore.
This behaviour is used in the conform perl scripts to include the
GlibcConform module. This patch fixes that by calling perl with '-I.'.
This is not a security issue in this case as make ensures that the
current directory is $(srcdir)/conform/ when the scripts are called.
Passing the full path would do exactly the same.
[1] CVE-2016-1238 CVE-2016-6185
[2] https://rt.perl.org/Public/Bug/Display.html?id=127810
[3] https://lists.debian.org/debian-devel-announce/2016/08/msg00013.html
Changelog:
* conform/Makefile (conformtest-header-tests): Pass -I. to $(PERL).
(linknamespace-symlists-tests): Likewise.
(linknamespace-header-tests): Likewise.
After some discussion in libc-alpha about this POSIX compliance fix, I see
that GLIBC should indeed revert back to previous definition of msghdr and
cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some
reasons:
* The possible issue where the syscalls wrapper add the compatibility
layer is quite limited in scope and range. And kernel current
also add some limits to the values on the internal msghdr and
cmsghdr fields:
- msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns
EMSGSIZE.
- msghdr::msg_controllen larger than INT_MAX returns ENOBUFS.
* There is a small performance hit for recvmsg/sendmsg/recmmsg which
is neglectable, but it is a big hit for sendmmsg since now instead
of calling the syscall for the packed structure, GLIBC is calling
multiple sendmsg. This defeat the very existence of the syscall.
* It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt).
However the fix is incomplete because it does add any runtime check
since libsanitizer currently does not have any facility to intercept
symbols with multiple version [2].
This, along with incorret dlsym/dlvsym return for versioned symbol due
another bug [3], makes hard to interpose versioned symbols.
Also, current approach of fixing GCC PR#71445 leads to half-baked
solutions without versioned symbol interposing.
This patch basically reverts commits 2f0dc39029, 222c2d7f43,
af7f7c7ec8. I decided to not revert abf29edd4a (Adjust
kernel-features.h defaults for recvmsg and sendmsg) mainly because it
does not really address the POSIX compliance original issue and also
adds some cleanups.
Tested on x86, i386, s390, s390x, aarch64, and powerpc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445
[2] https://github.com/google/sanitizers/issues/628
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932
* conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
* nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and
ptw-oldsendmsg.
(CFLAGS-oldrecvmsg.c): Remove rule.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmsg.c): Add rule.
(CFLAGS-sendmsg.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg.
(CFLAGS-recvmsg.c): Remove rule.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-oldrecvmsg.c): Likewise.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmmsg.c): Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert
to kernel defined interfaces.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
(msghdr.__glibc_reserved1): Remove member.
(msghdr.__glibc_reserved2): Likewise.
(cmsghdr.__glibc_reserved1): Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file.
* sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous
version.
* sysdeps/unix/sysv/linux/recvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24):
Remove recvmsg and sendmsg.
* sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file
* sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24
version for {recv,send,recm,sendm}msg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
The conform/ test of limits.h namespace for XPG3 was failing because
of NL_* and NZERO defines. Those symbols are EX-shaded, not
UX-shaded, so it's correct for them to be defined for XPG3; this patch
corrects the expectations accordingly. (Actually it looks like they
should not be listed as optional for these standards, but that's
another matter.)
Tested for x86_64 and x86.
* conform/data/limits.h-data (CHARCLASS_NAME_MAX): Also expect for
[XPG3 || XPG4].
(NL_ARGMAX): Also expect for [XPG3].
(NL_LANGMAX): Likewise.
(NL_MSGMAX): Likewise.
(NL_NMAX): Likewise.
(NL_SETMAX): Likewise.
(NL_TEXTMAX): Likewise.
(NZERO): Likewise.
(TMP_MAX): Likewise.
* conform/Makefile (test-xfail-XPG3/limits.h/conform): Remove
variable.
This patch corrects various conformtest expectations in ftw.h for XPG3
and XPG4.
Tested for x86_64 and x86.
* conform/data/ftw.h-data (struct FTW): Do not expect for [XPG3].
(FTW_DP): Do not expect for [XPG3 || XPG4].
(FTW_SL): Do not expect for [XPG3].
(FTW_SLN): Likewise.
(FTW_PHYS): Likewise.
(FTW_MOUNT): Likewise.
(FTW_DEPTH): Likewise.
(FTW_CHDIR): Likewise.
(nftw): Likewise.
* conform/Makefile (test-xfail-XPG3/ftw.h/conform): Remove
variable.
This patch corrects some conformtest expectations for pwd.h for XPG4.
Tested for x86_64 and x86.
* conform/data/pwd.h-data (endpwent): Do not expect for [XPG3].
(getpwent): Likewise.
(setpwent): Likewise.
* conform/Makefile (test-xfail-XPG3/pwd.h/conform): Remove
variable.
This patch corrects some conformtest expectations for search.h for
XPG3.
Tested for x86_64 and x86.
* conform/data/search.h-data (insque): Do not expect for [XPG3].
(remque): Likewise.
* conform/Makefile (test-xfail-XPG3/search.h/conform): Remove
variable.
stdlib.h declares grantpt, ptsname, unlockpt for __USE_XOPEN. This
patch corrects the condition to __USE_XOPEN_EXTENDED (these functions
are new in XPG4).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20094]
* stdlib/stdlib.h (grantpt): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
(unlockpt): Likewise.
(ptsname): Likewise.
* conform/Makefile (test-xfail-XPG3/stdlib.h/conform): Remove
variable.
sys/stat.h should define S_IFSOCK and S_ISSOCK for XPG4 (XNS), but
does not. This patch corrects the relevant header conditionals.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20076]
* io/sys/stat.h (S_IFSOCK): Define for [__USE_XOPEN_EXTENDED]
instead of [__USE_UNIX98].
(S_ISSOCK): Likewise.
* conform/Makefile (test-xfail-XPG4/sys/stat.h/conform): Remove
variable.
stdlib.h declares rand_r if __USE_POSIX; i.e., POSIX.1:1990. But
rand_r was added along with threads, so the condition should be
__USE_POSIX199506. This patch corrects the condition.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20074]
* stdlib/stdlib.h (rand_r): Declare if [__USE_POSIX199506], not if
[__USE_POSIX].
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove
variable.
UNIX98 and XPG4 have ttyslot in <stdlib.h>. glibc, however, has it in
<unistd.h>, for __USE_MISC || (__USE_XOPEN_EXTENDED && !__USE_UNIX98),
but no supported standard has it in <unistd.h>.
This patch adds a properly conditioned declaration to <stdlib.h> (only
enabled for the relevant standards, not for __USE_MISC or __USE_GNU).
The <unistd.h> declaration is restricted to __USE_MISC. Some relevant
XFAILs are removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20051]
* posix/unistd.h [__USE_XOPEN_EXTENDED && !__USE_UNIX98]
(ttyslot): Do not declare.
* stdlib/stdlib.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K]
(ttyslot): New prototype.
* conform/Makefile (test-xfail-XPG4/unistd.h/conform): Remove
variable.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
This patch corrects some spurious conformtest stdlib.h expectations
for XPG3 (not based on a full review of the expectations for that
standard, so other issues may remain).
Tested for x86_64 and x86.
* conform/data/stdlib.h-data (a64l): Do not expect for [XPG3].
(ecvt): Likewise.
(fcvt): Likewise.
(gcvt): Likewise.
(getsubopt): Likewise.
(grantpt): Likewise.
(initstate): Likewise.
(l64a): Likewise.
(mktemp): Likewise.
(mkstemp): Likewise.
(ptsname): Likewise.
(random): Likewise.
(realpath): Likewise.
(setstate): Likewise.
(srandom): Likewise.
(ttyslot): Likewise.
(unlockpt): Likewise.
(valloc): Likewise.
This patch corrects a spurious conformtest expectation of strdup in
string.h for XPG3.
Tested for x86_64 and x86.
* conform/data/string.h-data (strdup): Do not expect for [XPG3].
* conform/Makefile (test-xfail-XPG3/string.h/conform): Remove
variable.
This patch corrects spurious conformtest expectations of getdate and
getdate_err for XPG3. (This is not based on a full review of the
expectations, so there may be other issues where the header and tests
agree but are both incorrect.)
Tested for x86_64 and x86.
* conform/data/time.h-data (getdate_err): Do not expect for
[XPG3].
(getdate): Likewise.
* conform/Makefile (test-xfail-XPG3/time.h/conform): Remove
variable.
The conformtest tests of unistd.h fail for XPG3 because of various
expectations that are incorrect for XPG3. This patch corrects those
bogus expectations, and one bogus expectation for XPG4. (This is not
based on a full review of the standards so there may well still be
other bugs in the expectations for this header.)
Tested for x86_64 and x86.
* conform/data/unistd.h-data (F_LOCK): Do not expect for [XPG3].
(F_ULOCK): Likewise.
(F_TEST): Likewise.
(F_TLOCK): Likewise.
(useconds_t): Likewise.
(intptr_t): Do not expect for [XPG3] or [XPG4].
(brk): Do not expect for [XPG3]
(fchown): Likewise.
(fchdir): Likewise.
(ftruncate): Likewise.
(getdtablesize): Likewise.
(gethostid): Likewise.
(getpagesize): Likewise.
(getpgid): Likewise.
(getsid): Likewise.
(getwd): Likewise.
(lchown): Likewise.
(lockf): Likewise.
(readlink): Likewise.
(sbrk): Likewise.
(setpgrp): Likewise.
(setregid): Likewise.
(setreuid): Likewise.
(symlink): Likewise.
(sync): Likewise.
(truncate): Likewise.
(ualarm): Likewise.
(usleep): Likewise.
(vfork): Likewise.
* conform/Makefile (test-xfail-XPG3/unistd.h/conform): Remove
variable.
unistd.h declares gethostname for __USE_UNIX98 || __USE_XOPEN2K. But
it's also in XPG4 (XNS volume - C438 - not the main definitions of
system interfaces and headers in C435). This patch corrects the
condition.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20054]
* posix/unistd.h (gethostname): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_UNIX98].
* conform/data/unistd.h-data (gethostname): Do not expect for
[XPG3].
The conform/ tests for fcntl.h are failing for XPG3 and XPG4 because
of missing S_IFSOCK.
This is a case of a bogus test. The relevant wording requiring such
constants is, in current POSIX (and this requirement dates back as far
as XPG4), "The <fcntl.h> header shall define the symbolic constants
for file modes for use as values of mode_t as described in
<sys/stat.h>.". Note that this is *file modes* not *file types*.
That makes sense, since the point is presumably for use with functions
such as open that are declared in fcntl.h, where file modes are
relevant but file types aren't. So this patch removes all those
spurious S_IF* expectations for fcntl.h (the macros are generally
still *allowed* through the permission to make everything from
sys/stat.h visible).
Tested for x86_64 and x86.
* conform/data/fcntl.h-data [!POSIX] (S_IFMT): Do not expect.
[!POSIX] (S_IFBLK): Likewise.
[!POSIX] (S_IFCHR): Likewise.
[!POSIX] (S_IFIFO): Likewise.
[!POSIX] (S_IFREG): Likewise.
[!POSIX] (S_IFDIR): Likewise.
[!POSIX] (S_IFLNK): Likewise.
[!POSIX] (S_IFSOCK): Likewise.
* conform/Makefile (test-xfail-XPG3/fcntl.h/conform): Remove
variable.
(test-xfail-XPG4/fcntl.h/conform): Likewise.
termios.h should declare tcgetsid for XPG4, but only does so for
__USE_UNIX98 || __USE_XOPEN2K8 at present. This patch fixes the
declaration conditions. A spurious conformtest expectation of this
declaration for XPG3 is removed, and two XFAILs that are fixed by
these changes are also removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20055]
* termios/termios.h (pid_t): Define for [__USE_XOPEN_EXTENDED]
instead of [__USE_UNIX98].
(tcgetsid): Declare for [__USE_XOPEN_EXTENDED] instead of
[__USE_UNIX98].
* conform/data/termios.h-data (tcgetsid): Do not expect for
[XPG3].
* conform/Makefile (test-xfail-XPG3/termios.h/conform): Remove
variable.
(test-xfail-XPG4/termios.h/conform): Likewise.
sys/stat.h declares fchmod if __USE_POSIX (i.e. POSIX.1:1990). But it
was actually added in 1993 and also in XPG4. This patch changes the
conditions to the correct __USE_POSIX199309 || __USE_XOPEN_EXTENDED.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20073]
* io/sys/stat.h (fchmod): Declare for
[__USE_POSIX199309 || __USE_XOPEN_EXTENDED], not [__USE_POSIX].
* conform/Makefile (test-xfail-XPG3/sys/stat.h/conform): Remove
variable.
This patch fixes various conformtest sys/stat.h expectations that were
incorrect for XPG3 (not based on a full review, so not necessarily an
exhaustive set of such corrections). Most of these corrections fix
spurious failures shown in testing (but that for fchmod introduces a
correct failure, as that function is wrongly declared for XPG3, so
this doesn't eliminate any XFAILs).
Tested for x86_64 and x86.
* conform/data/sys/stat.h-data [XPG3] (S_IFLNK): Do not expect.
[XPG3] (S_IFSOCK): Likewise.
[XPG3] (S_ISVTX): Likewise.
[XPG3] (S_ISLNK): Likewise.
[XPG3] (S_ISSOCK): Likewise.
[XPG3] (fchmod): Likewise.
[XPG3] (lstat): Likewise.
[XPG3] (mknod): Likewise.
The conformtest expectations expect the struct stat fields st_blksize
and st_blocks to be of types blksize_t and blkcnt_t. But XPG4 does
not have those types, using long instead, and XPG3 does not have these
fields at all. This patch adjusts the expectations for those
standards, XFAILing them for XPG4 to allow for systems where the
typedefs don't correspond to long.
Tested for x86_64 and x86.
* conform/data/sys/stat.h-data (st_blksize): Do not expect for
[XPG3]. Expect type long and XFAIL for [XPG4].
(st_blocks): Likewise.
For UNIX98 (only), unistd.h should declare pthread_atfork, but that
declaration is missing. This patch adds it.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20044]
* posix/unistd.h [__USE_UNIX98 && !__USE_XOPEN2K]
(pthread_atfork): New prototype.
* conform/Makefile (test-xfail-UNIX98/unistd.h/conform): Remove
variable.
The conformtest tests for sys/types.h for XPG3 and XPG4 fail because
of missing blksize_t. This is a bug in the expectations; that type is
not part of those standards. This patch stops the tests from
expecting it, and some other types that also are not part of XPG3 and
XPG4.
Tested for x86_64 and x86.
* conform/data/sys/types.h-data (blkcnt_t): Do not expect for
[XPG3 || XPG4].
(blksize_t): Likewise.
(clockid_t): Likewise.
* conform/Makefile (test-xfail-XPG3/sys/types.h/conform): Remove
variable.
(test-xfail-XPG4/sys/types.h/conform): Likewise.
For UNIX98 and older standards, sys/time.h should not define struct
timespec, but does so via the inclusion of sys/select.h (which is a
new header in the 2001 edition of POSIX, and defines struct timespec
because of the declaration of pselect, a new function in the 2001
edition of POSIX). In turn, this affects some other headers that
themselves include sys/time.h.
This patch fixes this by conditioning the __need_timespec definition
in sys/select.h on __USE_XOPEN2K, the same condition used there for
the declaration of pselect (this has no effect on direct uses of
sys/select.h with feature test macros for any standard that includes
that header, since such standards result in __USE_XOPEN2K being
defined).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20041]
* misc/sys/select.h (__need_timespec): Only define if
[__USE_XOPEN2K].
* conform/Makefile (test-xfail-XPG4/sys/time.h/conform): Remove
variable.
(test-xfail-XPG4/utmpx.h/conform): Likewise.
(test-xfail-UNIX98/sys/time.h/conform): Likewise.
(test-xfail-UNIX98/utmpx.h/conform): Likewise.
