Fix the bind-now case when DT_REL and DT_JMPREL sections are separate
and there is a gap between them.
[BZ #14341]
* elf/dynamic-link.h (elf_machine_lazy_rel): Properly handle the
case when there is a gap between DT_REL and DT_JMPREL sections.
* sysdeps/x86_64/Makefile (tests): Add tst-split-dynreloc.
(LDFLAGS-tst-split-dynreloc): New.
(tst-split-dynreloc-ENV): Likewise.
* sysdeps/x86_64/tst-split-dynreloc.c: New file.
* sysdeps/x86_64/tst-split-dynreloc.lds: Likewise.
To remove -Wno-error=undef, we need to fix the remaining cases where
there are -Wundef warnings in the testsuite. One of those places is
in elf/tst-execstack.c.
tst-execstack.c tests USE_PTHREADS with #if. nptl/tst-execstack.c
defines USE_PTHREADS to 1 before including ../elf/tst-execstack.c,
while elf/tst-execstack.c, when compiled directly, leaves it
undefined.
This patch adds a setting of CPPFLAGS-tst-execstack.c to
elf/Makefile. An alternative approach would be to rename
tst-execstack.c to tst-execstack-main.c and have two different
tst-execstack.c files include it, each with an appropriate
USE_PTHREADS #define.
Tested for x86_64.
* elf/Makefile [$(have-z-execstack) = yes]
(CPPFLAGS-tst-execstack.c): New variable.
https://sourceware.org/bugzilla/show_bug.cgi?id=18778
If dlopen fails to load an object that has triggered loading libpthread it
causes ld.so to unload libpthread because its DF_1_NODELETE flags has been
forcefully cleared. The next call to __rtdl_unlock_lock_recursive will crash
since pthread_mutex_unlock no longer exists.
This patch moves l->l_flags_1 &= ~DF_1_NODELETE out of loop through all loaded
libraries and performs the action only on inconsistent one.
[BZ #18778]
* elf/Makefile (tests): Add Add tst-nodelete2.
(modules-names): Add tst-nodelete2mod.
(tst-nodelete2mod.so-no-z-defs): New.
($(objpfx)tst-nodelete2): Likewise.
($(objpfx)tst-nodelete2.out): Likewise.
(LDFLAGS-tst-nodelete2): Likewise.
* elf/dl-close.c (_dl_close_worker): Move DF_1_NODELETE clearing
out of loop through all loaded libraries.
* elf/tst-nodelete2.c: New file.
* elf/tst-nodelete2mod.c: Likewise.
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they did not have an `int main (void)'
declaration. Instead their `main' functions were declared with arguments
(i.e. argc, argv) even though they didn't use them.
Remove these arguments and include the test skeleton in these tests.
When an TLS destructor is registered, we set the DF_1_NODELETE flag to
signal that the object should not be destroyed. We then clear the
DF_1_NODELETE flag when all destructors are called, which is wrong -
the flag could have been set by other means too.
This patch replaces this use of the flag by using l_tls_dtor_count
directly to determine whether it is safe to unload the object. This
change has the added advantage of eliminating the lock taking when
calling the destructors, which could result in a deadlock. The patch
also fixes the test case tst-tls-atexit - it was making an invalid
dlclose call, which would just return an error silently.
I have also added a detailed note on concurrency which also aims to
justify why I chose the semantics I chose for accesses to
l_tls_dtor_count. Thanks to Torvald for his help in getting me
started on this and (literally) teaching my how to approach the
problem.
Change verified on x86_64; the test suite does not show any
regressions due to the patch.
ChangeLog:
[BZ #18657]
* elf/dl-close.c (_dl_close_worker): Don't unload DSO if there
are pending TLS destructor calls.
* include/link.h (struct link_map): Add concurrency note for
L_TLS_DTOR_COUNT.
* stdlib/cxa_thread_atexit_impl.c (__cxa_thread_atexit_impl):
Don't touch the link map flag. Atomically increment
l_tls_dtor_count.
(__call_tls_dtors): Atomically decrement l_tls_dtor_count.
Avoid taking the load lock and don't touch the link map flag.
* stdlib/tst-tls-atexit-nodelete.c: New test case.
* stdlib/Makefile (tests): Use it.
* stdlib/tst-tls-atexit.c (do_test): dlopen
tst-tls-atexit-lib.so again before dlclose. Add conditionals
to allow tst-tls-atexit-nodelete test case to use it.
This symbol is defined in the ldso, and is used both there and libc.so.
There is no hidden symbol for it though which leads to relocations in
the ldso and the elf/check-localplt test failing. Add a hidden def for
rtld to fix all of that.
This function/file is only used by hppa & ia64, so no testing is needed
for other arches.
The DF_1_NODELETE flag is set too late when opening a DSO, due to
which, if a DSO is already open, subsequently opening it with
RTLD_NODELETE fails to set the DF_1_NODELETE flag. This patch fixes
this by setting the flag immediately after bumping the opencount.
Verified on x86_64.
[BZ #18676]
* elf/tst-nodelete-opened.c: New test case.
* elf/tst-nodelete-opened-lib.c: New test case module.
* elf/Makefile (tests, modules-names): Use them.
* elf/dl-open.c (dl_open_worker): Set DF_1_NODELETE flag
early.
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they were reused in other tests via the #include
directive, and so deemed worth an inspection before they were modified.
This has now been done.
ChangeLog:
2015-07-09 Arjun Shankar <arjun.is@lostca.se>
* elf/tst-leaks1.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* localedata/tst-langinfo.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-fpucw.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-tgmath.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-tgmath2.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* setjmp/tst-setjmp.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* stdio-common/tst-sscanf.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* sysdeps/x86_64/tst-audit6.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
This test was skipped by the use-test-skeleton conversion script
[29955b5d] because the definition of `main' did not begin according to
the GNU formatting style that the script assumed.
ChangeLog:
2015-07-09 Arjun Shankar <arjun.is@lostca.se>
* elf/tst-audit9.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
https://sourceware.org/bugzilla/show_bug.cgi?id=17833
I've a shared library that contains both undefined and unique symbols.
Then I try to call the following sequence of dlopen:
1. dlopen("./libfoo.so", RTLD_NOW)
2. dlopen("./libfoo.so", RTLD_LAZY | RTLD_GLOBAL)
First dlopen call terminates with error because of undefined symbols,
but STB_GNU_UNIQUE ones set DF_1_NODELETE flag and hence block library
in the memory.
The library goes into inconsistent state as several structures remain
uninitialized. For instance, relocations for GOT table were not performed.
By the time of second dlopen call this library looks like as it would be
fully initialized but this is not true: any call through incorrect GOT
table leads to segmentation fault. On some systems this inconsistency
triggers assertions in the dynamic linker.
This patch adds a parameter to _dl_close_worker to implement forced object
deletion in case of dlopen() failure:
1. Clears DF_1_NODELETE bit if forced, to allow library to be removed from
memory.
2. For each unique symbol that is defined in this object clears
appropriate entry in _ns_unique_sym_table.
[BZ #17833]
* elf/Makefile (tests): Add tst-nodelete.
(modules-names): Add tst-nodelete-uniquemod.
(tst-nodelete-uniquemod.so-no-z-defs): New.
(tst-nodelete-rtldmod.so-no-z-defs): Likewise.
(tst-nodelete-zmod.so-no-z-defs): Likewise.
($(objpfx)tst-nodelete): Likewise.
($(objpfx)tst-nodelete.out): Likewise.
(LDFLAGS-tst-nodelete): Likewise.
(LDFLAGS-tst-nodelete-zmod.so): Likewise.
* elf/dl-close.c (_dl_close_worker): Add a parameter to
implement forced object deletion.
(_dl_close): Pass false to _dl_close_worker.
* elf/dl-open.c (_dl_open): Pass true to _dl_close_worker.
* elf/tst-nodelete.cc: New file.
* elf/tst-nodeletelib.cc: Likewise.
* elf/tst-znodeletelib.cc: Likewise.
* include/dlfcn.h (_dl_close_worker): Add a new parameter.
This tag allows debugging of MIPS position independent executables
and provides access to shared library information.
* elf/elf.h (DT_MIPS_RLD_MAP_REL): New macro.
(DT_MIPS_NUM): Update.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_DEBUG_SETUP): Handle
DT_MIPS_RLD_MAP_REL.
To support building glibc with GCC 6 configured with --enable-default-pie,
which generates PIE by default, we need to build programs as PIE. But
elf/tst-dlopen-aout must not be built as PIE since it tests dlopen on
ET_EXEC file and PIE is ET_DYN.
[BZ #17841]
* Makeconfig (no-pie-ldflag): New.
(+link): Set to $(+link-pie) if default to PIE.
(+link-tests): Set to $(+link-pie-tests) if default to PIE.
* config.make.in (build-pie-default): New.
* configure.ac (libc_cv_pie_default): New. Set to yes if -fPIE
is default. AC_SUBST.
* configure: Regenerated.
* elf/Makefile (LDFLAGS-tst-dlopen-aout): New.
We need to align TCB offset to the maximum alignment for TLS_TCB_AT_TP
targets, as _dl_allocate_tls_storage (in elf/dl-tls.c) does using
__libc_memalign and dl_tls_static_align.
[BZ #18383]
* csu/libc-tls.c (__libc_setup_tls) [TLS_TCB_AT_TP]: Align
TCB_OFFSET to MAX_ALIGN, not just TCBALIGN. Add comment.
* elf/Makefile (test-xfail-tst-tlsalign{,-static}): Remove
comment for i386/x86-64.
(test-xfail-tst-tlsalign-extern-static): Removed.
Many packages, including GCC, install Python files for GDB in library
diretory. ldconfig reads them and issue errors since they aren't ELF
files:
ldconfig: /usr/gcc-5.1.1/lib/libstdc++.so.6.0.21-gdb.py is not an ELF file - it has the wrong magic bytes at the start.
ldconfig: /usr/gcc-5.1.1/libx32/libstdc++.so.6.0.21-gdb.py is not an ELF file - it has the wrong magic bytes at the start.
ldconfig: /usr/gcc-5.1.1/lib64/libstdc++.so.6.0.21-gdb.py is not an ELF file - it has the wrong magic bytes at the start.
This patch silences ldconfig on GDB Python files by checking filenames
with -gdb.py suffix.
[BZ #18585]
* elf/readlib.c (is_gdb_python_file): New.
(process_file): Don't issue errors on filenames with -gdb.py
suffix.
Lazy TLSDESC initialization needs to be synchronized with concurrent TLS
accesses. The TLS descriptor contains a function pointer (entry) and an
argument that is accessed from the entry function. With lazy initialization
the first call to the entry function updates the entry and the argument to
their final value. A final entry function must make sure that it accesses an
initialized argument, this needs synchronization on systems with weak memory
ordering otherwise the writes of the first call can be observed out of order.
There are at least two issues with the current code:
tlsdesc.c (i386, x86_64, arm, aarch64) uses volatile memory accesses on the
write side (in the initial entry function) instead of C11 atomics.
And on systems with weak memory ordering (arm, aarch64) the read side
synchronization is missing from the final entry functions (dl-tlsdesc.S).
This patch only deals with aarch64.
* Write side:
Volatile accesses were replaced with C11 relaxed atomics, and a release
store was used for the initialization of entry so the read side can
synchronize with it.
* Read side:
TLS access generated by the compiler and an entry function code is roughly
ldr x1, [x0] // load the entry
blr x1 // call it
entryfunc:
ldr x0, [x0,#8] // load the arg
ret
Various alternatives were considered to force the ordering in the entry
function between the two loads:
(1) barrier
entryfunc:
dmb ishld
ldr x0, [x0,#8]
(2) address dependency (if the address of the second load depends on the
result of the first one the ordering is guaranteed):
entryfunc:
ldr x1,[x0]
and x1,x1,#8
orr x1,x1,#8
ldr x0,[x0,x1]
(3) load-acquire (ARMv8 instruction that is ordered before subsequent
loads and stores)
entryfunc:
ldar xzr,[x0]
ldr x0,[x0,#8]
Option (1) is the simplest but slowest (note: this runs at every TLS
access), options (2) and (3) do one extra load from [x0] (same address
loads are ordered so it happens-after the load on the call site),
option (2) clobbers x1 which is problematic because existing gcc does
not expect that, so approach (3) was chosen.
A new _dl_tlsdesc_return_lazy entry function was introduced for lazily
relocated static TLS, so non-lazy static TLS can avoid the synchronization
cost.
[BZ #18034]
* sysdeps/aarch64/dl-tlsdesc.h (_dl_tlsdesc_return_lazy): Declare.
* sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_return_lazy): Define.
(_dl_tlsdesc_undefweak): Guarantee TLSDESC entry and argument load-load
ordering using ldar.
(_dl_tlsdesc_dynamic): Likewise.
(_dl_tlsdesc_return_lazy): Likewise.
* sysdeps/aarch64/tlsdesc.c (_dl_tlsdesc_resolve_rela_fixup): Use
relaxed atomics instead of volatile and synchronize with release store.
(_dl_tlsdesc_resolve_hold_fixup): Use relaxed atomics instead of
volatile.
* elf/tlsdeschtab.h (_dl_tlsdesc_resolve_early_return_p): Likewise.
Make runtime-linker.h available outside $(elf-objpfx) by moving
the file to $(common-objpfx) and the rules for it to Makerules.
Tested for x86_64 and x86 (testsuite, and that no compiled code
changed by the patch).
* Makeconfig (+interp): Remove unused variable.
* elf/Makefile ($(objpfx)interp.os): Define for [$(build-shared) = yes]
only. Depend on $(common-objpfx)runtime-linker.h instead of
$(elf-objpfx)runtime-linker.h.
($(elf-objpfx)runtime-linker.h): Rename to
$(common-objpfx)runtime-linker.h and move ...
* Makerules [$(build-shared) = yes]: ... here.
* elf/interp.c: Include <runtime-linker.h> instead of
<elf/runtime-linker.h>.
PLT relocations aren't required when -z now used. Linker on master with:
commit 25070364b0ce33eed46aa5d78ebebbec6accec7e
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat May 16 07:00:21 2015 -0700
Don't generate PLT relocations for now binding
There is no need for PLT relocations with -z now. We can use GOT
relocations, which take less space, instead and replace 16-byte .plt
entres with 8-byte .plt.got entries.
bfd/
* elf32-i386.c (elf_i386_check_relocs): Create .plt.got section
for now binding.
(elf_i386_allocate_dynrelocs): Use .plt.got section for now
binding.
* elf64-x86-64.c (elf_x86_64_check_relocs): Create .plt.got
section for now binding.
(elf_x86_64_allocate_dynrelocs): Use .plt.got section for now
binding.
won't generate PLT relocations with -z now. elf/tst-audit2.c expect
certain order of execution in ld.so. With PLT relocations, the GOTPLT
entry of calloc is update to calloc defined in tst-audit2:
(gdb) bt
skip_ifunc=<optimized out>, reloc_addr_arg=<optimized out>,
version=<optimized out>, sym=<optimized out>, map=<optimized out>)
at ../sysdeps/i386/dl-machine.h:329
out>,
nrelative=<optimized out>, relsize=<optimized out>,
reladdr=<optimized out>, map=<optimized out>) at do-rel.h:137
reloc_mode=reloc_mode@entry=0,
consider_profiling=1, consider_profiling@entry=0) at dl-reloc.c:258
user_entry=0xffffcf1c, auxv=0xffffd0a8) at rtld.c:2133
start_argptr=start_argptr@entry=0xffffcfb0,
dl_main=dl_main@entry=0xf7fda6f0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit/build-i686-linux/elf/ld.so
(gdb)
and then calloc is called:
(gdb) c
Continuing.
Breakpoint 4, calloc (n=n@entry=20, m=4) at tst-audit2.c:18
18 {
(gdb) bt
reloc_mode=reloc_mode@entry=0, consider_profiling=1,
consider_profiling@entry=0) at dl-reloc.c:272
user_entry=0xffffcf1c, auxv=0xffffd0a8) at rtld.c:2133
start_argptr=start_argptr@entry=0xffffcfb0,
dl_main=dl_main@entry=0xf7fda6f0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit/build-i686-linux/elf/ld.so
(gdb)
With GOT relocation, calloc in ld.so is called first:
(gdb) bt
consider_profiling=1) at dl-reloc.c:272
user_entry=0xffffcf0c, auxv=0xffffd098) at rtld.c:2074
start_argptr=start_argptr@entry=0xffffcfa0,
dl_main=dl_main@entry=0xf7fda6c0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit-test/build-i686-linux/elf/ld.so
(gdb)
and then the GOT entry of calloc is updated:
(gdb) bt
skip_ifunc=<optimized out>, reloc_addr_arg=<optimized out>,
version=<optimized out>, sym=<optimized out>, map=<optimized out>)
at ../sysdeps/i386/dl-machine.h:329
out>,
nrelative=<optimized out>, relsize=<optimized out>,
reladdr=<optimized out>, map=<optimized out>) at do-rel.h:137
reloc_mode=reloc_mode@entry=0,
consider_profiling=1, consider_profiling@entry=0) at dl-reloc.c:258
user_entry=0xffffcf0c, auxv=0xffffd098) at rtld.c:2133
start_argptr=start_argptr@entry=0xffffcfa0,
dl_main=dl_main@entry=0xf7fda6c0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit-test/build-i686-linux/elf/ld.so
(gdb)
After that, since calloc isn't called from ld.so nor any other modules,
magic in tst-audit2 isn't updated. Both orders are correct. This patch
makes sure that calloc in tst-audit2.c is called at least once from ld.so.
[BZ #18422]
* Makefile ($(objpfx)tst-audit2): Depend on $(libdl).
($(objpfx)tst-audit2.out): Also depend on
$(objpfx)tst-auditmod9b.so.
* elf/tst-audit2.c: Include <dlfcn.h>.
(calloc_called): New.
(calloc): Allow to be called more than once.
(do_test): dllopen/dlclose $ORIGIN/tst-auditmod9b.so.
A shared object doesn't need PLT if there are no PLT relocations. It
shouldn't be an error if DT_PLTRELSZ is missing.
[BZ #18410]
* elf/dl-reloc.c (_dl_relocate_object): Don't issue an error
for missing DT_PLTRELSZ.
Any use of SHF_EXCLUDE in code that tries to check it against sh_flags
will trigger undefined behaviour because it is defined as a 31 bit shift
against an signed integer. Fix by explicitly using an unsigned int.
Linkers in some versions of binutils 2.25 and 2.26 don't support protected
data symbol with error messsage like:
/usr/bin/ld: copy reloc against protected `bar' is invalid
/usr/bin/ld: failed to set dynamic section sizes: Bad value
We check if linker supports copy reloc against protected data symbol to
avoid running the test if linker is broken.
[BZ #17711]
* config.make.in (have-protected-data): New.
* configure.ac: Check linker support for protected data symbol.
* configure: Regenerated.
* elf/Makefile (modules-names): Add tst-protected1moda and
tst-protected1modb if $(have-protected-data) is yes.
(tests): Add tst-protected1a and tst-protected1b if
$(have-protected-data) is yes.
($(objpfx)tst-protected1a): New.
($(objpfx)tst-protected1b): Likewise.
(tst-protected1modb.so-no-z-defs): Likewise.
* elf/tst-protected1a.c: New file.
* elf/tst-protected1b.c: Likewise.
* elf/tst-protected1mod.h: Likewise.
* elf/tst-protected1moda.c: Likewise.
* elf/tst-protected1modb.c: Likewise.
With copy relocation, address of protected data defined in the shared
library may be external. When there is a relocation against the
protected data symbol within the shared library, we need to check if we
should skip the definition in the executable copied from the protected
data. This patch adds ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA and defines
it for x86. If ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA isn't 0, do_lookup_x
will skip the data definition in the executable from copy reloc.
[BZ #17711]
* elf/dl-lookup.c (do_lookup_x): When UNDEF_MAP is NULL, which
indicates it is called from do_lookup_x on relocation against
protected data, skip the data definion in the executable from
copy reloc.
(_dl_lookup_symbol_x): Pass ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA,
instead of ELF_RTYPE_CLASS_PLT, to do_lookup_x for
EXTERN_PROTECTED_DATA relocation against STT_OBJECT symbol.
* sysdeps/generic/ldsodefs.h * (ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA):
New. Defined to 4 if DL_EXTERN_PROTECTED_DATA is defined,
otherwise to 0.
* sysdeps/i386/dl-lookupcfg.h (DL_EXTERN_PROTECTED_DATA): New.
* sysdeps/i386/dl-machine.h (elf_machine_type_class): Set class
to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA for R_386_GLOB_DAT.
* sysdeps/x86_64/dl-lookupcfg.h (DL_EXTERN_PROTECTED_DATA): New.
* sysdeps/x86_64/dl-machine.h (elf_machine_type_class): Set class
to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA for R_X86_64_GLOB_DAT.
This patch is glibc support for a PowerPC TLS optimization, inspired
by Alexandre Oliva's TLS optimization for other processors,
http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt
In essence, this optimization uses a zero module id in the tls_index
GOT entry to indicate that a TLS variable is allocated space in the
static TLS area. A special plt call linker stub for __tls_get_addr
checks for such a tls_index and if found, returns the offset
immediately. The linker communicates the fact that the special
__tls_get_addr stub is used by setting a bit in the dynamic tag
DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this
optimization is available by the presence of __tls_get_addr_opt.
tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for
tst-tls-dlinfo, which otherwise would fail since it tests that no
static tls is allocated. The ld option --no-tls-get-addr-optimize has
been available since binutils-2.20 so doesn't need a configure test.
* NEWS: Advertise TLS optimization.
* elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define.
(DT_PPC_NUM): Increment.
* elf/dynamic-link.h (HAVE_STATIC_TLS): Define.
(CHECK_STATIC_TLS): Use here.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize
TLS descriptors.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/dl-tls.c: New file.
* sysdeps/powerpc/Versions: Add __tls_get_addr_opt.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test.
Build tst-tlsmod2.so with --no-tls-get-addr-optimize.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
for ChangeLog
[BZ #17090]
[BZ #17620]
[BZ #17621]
[BZ #17628]
* NEWS: Update.
* elf/dl-tls.c (_dl_update_slotinfo): Clean up outdated DTV
entries with Static TLS too. Skip entries past the end of the
allocated DTV, from Alan Modra.
(tls_get_addr_tail): Update to glibc_likely/unlikely. Move
Static TLS DTV entry set up from...
(_dl_allocate_tls_init): ... here (fix modid assertion), ...
* elf/dl-reloc.c (_dl_nothread_init_static_tls): ... here...
* nptl/allocatestack.c (init_one_static_tls): ... and here...
* elf/dlopen.c (dl_open_worker): Drop l_tls_modid upper bound
for Static TLS.
* elf/tlsdeschtab.h (map_generation): Return size_t. Check
that the slot we find is associated with the given map before
using its generation count.
* nptl_db/db_info.c: Include ldsodefs.h.
(rtld_global, dtv_slotinfo_list, dtv_slotinfo): New typedefs.
* nptl_db/structs.def (DB_RTLD_VARIABLE): New macro.
(DB_MAIN_VARIABLE, DB_RTLD_GLOBAL_FIELD): Likewise.
(link_map::l_tls_offset): New struct field.
(dtv_t::counter): Likewise.
(rtld_global): New struct.
(_rtld_global): New rtld variable.
(dl_tls_dtv_slotinfo_list): New rtld global field.
(dtv_slotinfo_list): New struct.
(dtv_slotinfo): Likewise.
* nptl_db/td_symbol_list.c: Drop gnu/lib-names.h include.
(td_lookup): Rename to...
(td_mod_lookup): ... this. Use new mod parameter instead of
LIBPTHREAD_SO.
* nptl_db/td_thr_tlsbase.c: Include link.h.
(dtv_slotinfo_list, dtv_slotinfo): New functions.
(td_thr_tlsbase): Check DTV generation. Compute Static TLS
addresses even if the DTV is out of date or missing them.
* nptl_db/fetch-value.c (_td_locate_field): Do not refuse to
index zero-length arrays.
* nptl_db/thread_dbP.h: Include gnu/lib-names.h.
(td_lookup): Make it a macro implemented in terms of...
(td_mod_lookup): ... this declaration.
* nptl_db/db-symbols.awk (DB_RTLD_VARIABLE): Override.
(DB_MAIN_VARIABLE): Likewise.
ldconfig is using an aux-cache to speed up the ld.so.cache update. It
is read by mmaping the file to a structure which contains data offsets
used as pointers. As they are not checked, it is not hard to get
ldconfig to segfault with a corrupted file. This happens for instance if
the file is truncated, which is common following a filesystem check
following a system crash.
This can be reproduced for example by truncating the file to roughly
half of it's size.
There is already some code in elf/cache.c (load_aux_cache) to check
for a corrupted aux cache, but it happens to be broken and not enough.
The test (aux_cache->nlibs >= aux_cache_size) compares the number of
libs entry with the cache size. It's a non sense, as it basically
assumes that each library entry is a 1 byte... Instead this commit
computes the theoretical cache size using the headers and compares it
to the real size.
With copy relocation, address of protected data defined in the shared
library may be external. Compiler shouldn't asssume protected data will
be local. But due to
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65248
__attribute__((visibility("protected"))) doesn't work correctly, we need
to use asm (".protected xxx") instead.
* elf/ifuncdep2.c (global): Replace
__attribute__((visibility("protected"))) with
asm (".protected global").
* elf/ifuncmod1.c (global): Likewise.
* elf/ifuncmod5.c (global): Likewise.
Protocted symbol in shared library can only be accessed from PIE
or shared library. Linker in binutils 2.26 enforces it. We must
compile vismain with -fPIE and link it with -pie.
[BZ #17711]
* elf/Makefile (tests): Add vismain only if PIE is enabled.
(tests-pie): Add vismain.
(CFLAGS-vismain.c): New.
* elf/vismain.c: Add comments for PIE requirement.
We are replacing all of the bespoke alignment code with
ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN.
This cleans up malloc/malloc.c, malloc/arena.c, and
elf/dl-reloc.c. It also makes all the code consistently
use pagesize, and powerof2 as required.
Code size is reduced with the removal of precomputed
pagemask, and use of pagesize instead. No measurable
difference in performance.
No regressions on x86_64.
The ability to recursively call dlopen is useful for malloc
implementations that wish to load other dynamic modules that
implement reentrant/AS-safe functions to use in their own
implementation.
Given that a user malloc implementation may be called by an
ongoing dlopen to allocate memory the user malloc
implementation interrupts dlopen and if it calls dlopen again
that's a reentrant call.
This patch fixes the issues with the ld.so.cache mapping
and the _r_debug assertion which prevent this from working
as expected.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00446.html
__tls_get_addr/___tls_get_addr is always defined in ld.so. There is
no need to call them via PLT inside ld.so. This patch adds the hidden
__tls_get_addr/___tls_get_addr aliases and calls them directly from
_dl_tlsdesc_dynamic. There is no need to set up the EBX register in
i386 _dl_tlsdesc_dynamic when calling the hidden ___tls_get_addr.
* elf/dl-tls.c (__tls_get_addr): Provide the hidden definition
if not defined.
* sysdeps/i386/dl-tls.h (___tls_get_addr): Provide the hidden
definition.
* sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Call the
hidden ___tls_get_addr.
* sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Call the
hidden __tls_get_addr.
* sysdeps/generic/localplt.data (__tls_get_addr): Removed.
* sysdeps/unix/sysv/linux/i386/localplt.data (___tls_get_addr):
Likewise.
This patch fixes a warning "tst-unique4lib.cc:17:12: warning: 'b'
defined but not used [-Wunused-variable]". I'm not sure exactly what
aspects of the test are or are not significant for the issue it is
testing for; the patch makes the minimal change of marking the
variable with __attribute__ ((used)).
Tested for x86_64.
* elf/tst-unique4lib.cc (b): Mark with __attribute__ ((used)).
Developers creating development packages must take care
to have their static linker DSO link point to the actual
SONAME file. This allows ldconfig to correctly create
the required links for the SONAME. The behaviour is now
more clearly documented in a code comment added by this
patch.
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
Replace with IS_IN (ldconfig). No change in generated code.
* elf/Makefile (CFLAGS-ldconfig.c): Remove definition of
IS_IN_ldconfig.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Use IS_IN.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h: Likewise.
Make sure that all instances where NOT_IN_libc is defined also defines
IN_MODULE to facilitate removal NOT_IN_libc in future passes.
Verified that the generated code is unchanged on x86_64.
* elf/Makefile (libof-sotruss-lib): Set as extramodules.
Replace with IS_IN and IS_IN_LIB macros instead. This change results
in a change in generated code, because it fixes a subtle bug. The bug
was introduced when systemtap probes were added to lowlevellock.h,
which resulted in stap-probe.h being included in a number of places.
stap-probe.h always defines IN_LIB, which breaks a check in errno.h
and netdb.h since they rely on that macro to decide whether to
implement an internal version of a declaration or an external one.
The components that see a code change due to this are:
iconv_prog
libmemusage.so
libpcprofile.so
libSegFault.so
libutil.so.1
locale
localedef
nscd
All other built components (i.e. libc, libpthread, etc.) remain
unchanged by this on x86_64.
* elf/Makefile (CPPFLAGS-.os): Remove IN_LIB.
* elf/rtld-Rules (rtld-CPPFLAGS): Likewise.
* extra-lib.mk (CPPFLAGS-$(lib)): Likewise.
* include/libc-symbols.h (IS_IN_LIB): New macro.
* include/errno.h: Use IS_IN_LIB instead of IN_LIB.
* include/netdb.h: Likewise.
* include/stap-probe.h: Remove all uses of IN_LIB.
The latest version of the binutils ELF header defines a new set of
dynamic relocations for ILP32 and renames some to make the naming
more uniform.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* elf/elf.h (R_AARCH64_P32_ABS32, R_AARCH64_P32_COPY,
R_AARCH64_P32_GLOB_DAT, R_AARCH64_P32_JUMP_SLOT,
R_AARCH64_P32_RELATIVE, R_AARCH64_P32_TLS_DTPMOD,
R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC, R_AARCH64_P32_IRELATIVE): Define.
(R_AARCH64_TLS_DTPMOD64): Rename to ..
(R_AARCH64_TLS_DTPMOD): This.
(R_AARCH64_TLS_DTPREL64): Rename to ...
(R_AARCH64_TLS_DTPREL): This.
(R_AARCH64_TLS_TPREL64): Rename to ...
(R_AARCH64_TLS_TPREL): This.
* sysdeps/aarch64/dl-machine.h (elf_machine_type_class): Update
R_AARCH64_TLS_DTPMOD64, R_AARCH64_TLS_DTPREL64, and
R_AARCH64_TLS_TPREL64.
(elf_machine_rela): Likewise.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
For maximum paranoia we run ld.so through the normal set
of tests for all of the shared libraries. This includes
running ld.so through check-localplt, check-textrel, and
check-execstack. While none of these should trigger any
failures given the way ld.so is built, it might possibly
fail if a developer does something wrong. This paranoia
was triggered by a discussion over the use of __strcpy
vs. strcpy [1] and if the symbol could leak and use the
libc.so version.
The check-localplt test fails right away because localplt.data
needs updating for all arches. By default we add 6 new symbols:
__tls_get_addr, __libc_memalign, malloc, calloc, realloc and
free. Other machines like i386, power, and s390 require some
different symbol sets e.g. ___tls_get_addr vs. __tls_get_addr
for i386.
Verified for i386
Verified for x86_64
Verified for ppc32
Verified for ppc64
Verified for ppc64le
Verified for arm
Verified for aarch64
Verified for s390
Verified for s390x
Guessed for alpha
Guessed for ia64
Guessed for m68k
Guessed for microblaze
Guessed for sparc32
Guessed for sparc64
Defaults for sh
Defaults for mips
Defaults for hppa
Defaults for tile
Machine manintainers notified to double check the data
used in localplt.data.
[1] https://sourceware.org/ml/libc-alpha/2014-10/msg00548.html
Completing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch removes the final use - that for _dl_starting_up - replacing it
by rtld_hidden_def / rtld_hidden_proto. Having removed the last use,
the mechanism itself is also removed.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch. (This is not much of a test since this
variable is only defined and used in the !HAVE_INLINED_SYSCALLS case.)
[BZ #14132]
* include/libc-symbols.h (INTUSE): Remove macro.
(INTDEF): Likewise.
(INTVARDEF): Likewise.
(_INTVARDEF): Likewise.
(INTDEF2): Likewise.
(INTVARDEF2): Likewise.
* elf/rtld.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Use
rtld_hidden_def instead of INTVARDEF.
* sysdeps/generic/ldsodefs.h [IS_IN_rtld]
(_dl_starting_up_internal): Remove declaration.
(_dl_starting_up): Use rtld_hidden_proto.
* elf/dl-init.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Remove
declaration.
[!HAVE_INLINED_SYSCALLS] (_dl_starting_up_internal): Likewise.
(_dl_init) [!HAVE_INLINED_SYSCALLS]: Don't use INTUSE with
_dl_starting_up.
* elf/dl-writev.h (_dl_writev): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h [!HAVE_INLINED_SYSCALLS]
(DL_STARTING_UP_DEF): Use __GI__dl_starting_up instead of
_dl_starting_up_internal.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use for _dl_mcount with use of rtld_hidden_def /
rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-profile.c (_dl_mcount): Use rtld_hidden_def instead of
INTDEF.
* sysdeps/generic/ldsodefs.h (_dl_mcount_internal): Remove
declaration.
(_dl_mcount): Use rtld_hidden_proto.
* elf/dl-runtime.c (_dl_profile_fixup): Don't use INTUSE with
_dl_mcount.
* elf/rtld.c (_rtld_global_ro): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch eliminates its use for _dl_init. Since _dl_init was already
declared with hidden visibility, creating a second hidden alias for it
was completely pointless, so this patch replaces all uses of
_dl_init_internal with plain _dl_init instead of using hidden_proto /
hidden_def (which are only needed when you want a hidden alias for a
non-hidden symbol; it's quite possible there are cases where they are
used but don't need to be because the symbol in question is not part
of the public ABI and is only used within a single library, so using
attributes_hidden instead would suffice).
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-init.c (_dl_init): Don't use INTDEF.
* sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead
of _dl_init_internal.
* sysdeps/alpha/dl-machine.h (RTLD_START): Likewise.
* sysdeps/arm/dl-machine.h (RTLD_START): Likewise.
* sysdeps/hppa/dl-machine.h (RTLD_START): Likewise.
* sysdeps/i386/dl-machine.h (RTLD_START): Likewise.
* sysdeps/ia64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/m68k/dl-machine.h (RTLD_START): Likewise.
* sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise.
* sysdeps/mips/dl-machine.h (RTLD_START): Likewise.
* sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sh/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use for _dl_argv with rtld_hidden_data_def and
rtld_hidden_proto. Some places in .S files that previously used
_dl_argv_internal or INTUSE(_dl_argv) now use __GI__dl_argv directly
(there are plenty of existing examples of such direct use of __GI_*).
A single place in rtld.c previously used _dl_argv without INTUSE,
apparently accidentally, while the rtld_hidden_proto mechanism avoids
such accidential omissions. As a consequence, this patch *does*
change the contents of stripped ld.so. However, the installed
stripped shared libraries are identical to those you get if instead of
this patch you change that single _dl_argv use to use INTUSE, without
any other changes.
Tested for x86_64 (testsuite as well as comparison of installed
stripped shared libraries as described above).
[BZ #14132]
* sysdeps/generic/ldsodefs.h (_dl_argv): Use rtld_hidden_proto.
[IS_IN_rtld] (_dl_argv_internal): Do not declare.
(rtld_progname): Make macro definition unconditional.
* elf/rtld.c (_dl_argv): Use rtld_hidden_data_def instead of
INTDEF.
(dlmopen_doit): Do not use INTUSE with _dl_argv.
(dl_main): Likewise.
* elf/dl-sysdep.c (_dl_sysdep_start): Likewise.
* sysdeps/alpha/dl-machine.h (RTLD_START): Use __GI__dl_argv
instead of _dl_argv_internal.
* sysdeps/powerpc/powerpc32/dl-start.S (_dl_start_user): Use
__GI__dl_argv instead of INTUSE(_dl_argv).
* sysdeps/powerpc/powerpc64/dl-machine.h (RTLD_START): Use
__GI__dl_argv instead of _dl_argv_internal.
This hook can be used to perform additional compatibility checks
between shared libraries by inspecting custom program header
information.
* elf/dl-machine-reject-phdr.h: New file.
* elf/dl-load.c: #include that.
(open_verify): Call elf_machine_reject_phdr_p and ignore the file
if that returned true.
During a refactoring pass several repeated blocks of code in dl-load.c
were turned into a call to a local function named local_strdup. There
is no need for local_strdup, and the routines should instead call
__strdup. This change does just that. We call the internal symbol
__strdup because calling strdup is unsafe. The user might be
using a standard that doesn't include strdup and may have defined this
symbol in their application. During a static link we might reference
the user defined symbol and crash if it doesn't implement a standards
conforming strdup. The resulting code is simpler to understand, and
makes it easier to debug.
No regressions on x86_64.
2014-10-28 Carlos O'Donell <carlos@redhat.com>
* dl-load.c (local_strdup): Remove.
(expand_dynamic_string_token): Use __strdup.
(decompose_rpath): Likewise.
(_dl_map_object): Likewise.
Continuing the removal of the obsolete INTDEF / INTVARDEF / INTUSE
mechanism, this patch replaces its use for __libc_enable_secure with
the use of rtld_hidden_data_def and rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def
instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* sysdeps/mach/hurd/dl-sysdep.c (__libc_enable_secure): Use
rtld_hidden_data_def instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* elf/dl-deps.c (expand_dst): Likewise.
* elf/dl-load.c (_dl_dst_count): Likewise.
(_dl_dst_substitute): Likewise.
(decompose_rpath): Likewise.
(_dl_init_paths): Likewise.
(open_path): Likewise.
(_dl_map_object): Likewise.
* elf/rtld.c (dl_main): Likewise.
(process_dl_audit): Likewise.
(process_envvars): Likewise.
* include/unistd.h [IS_IN_rtld] (__libc_enable_secure_internal):
Remove declaration.
(__libc_enable_secure): Use rtld_hidden_proto.
During auditing or profiling modes the dynamic loader
builds a cache of the relocated PLT entries in order
to reuse them when called again through the same PLT
entry. This way the PLT entry is never completed and
the call into the resolver always results in profiling
or auditing code running.
The problem is that the PLT relocation cache size
is not computed correctly. The size of the cache
should be "Size of a relocation result structure"
x "Number of PLT-related relocations". Instead the
code erroneously computes "Size of a relocation
result" x "Number of bytes worth of PLT-related
relocations". I can only assume this was a mistake
in the understanding of the value of DT_PLTRELSZ
which is the number of bytes of PLT-related relocs.
We do have a DT_RELACOUNT entry, which is a count
for dynamic relative relocs, but we have no
DT_PLTRELCOUNT and thus we need to compute it.
This patch corrects the computation of the size of the
relocation table used by the glibc profiling code.
For more details see:
https://sourceware.org/ml/libc-alpha/2014-09/msg00513.html
[BZ #17411]
* elf/dl-reloc.c (_dl_relocate_object): Allocate correct amount for
l_reloc_result.
Replace it with including an auto-generated linker-runtime.h.
Build-tested on x86_64 and found that there was no change in the
generated code.
* elf/Makefile (CFLAGS-interp.c): Remove.
($(elf-objpfx)runtime-linker.h): Generate header with linker
path string.
* elf/interp.c: Include generated runtime-linker.h
Barring libc.so and libdl.so, none of the libraries have any entry
points, so it is pointless to add a .interp section for them. The
libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that
file as well.
Build tested for x86_64, ppc64 and s390x. I have not moved
CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it
completely in a follow-up patch.
Siddhesh
* Makerules (lib%.so): Don't include $(+interp) in
prerequisites.
* elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc.
* dlfcn/eval.c: Remove file.
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
Convert all uses of __builtin_expect to __glibc_likely and
__glibc_unlikely. Most of these are trivial boolean expressions
but a few were not. In particular the use of __builtin_expect in
the switch expression in do_lookup_x has been removed. Verified
that there are no code changes on x86_64 and ARM aside from line
numbers.
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c: Use __glibc_unlikely and __glibc_likely
rather than __builtin_expect.
undefined_msg is only used once contrary to the comment.
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c (undefined_msg): Remove variable.
(_dl_lookup_symbol_x): Replace undefined_msg with string
literal.
Move handling of STB_GNU_UNIQUE symbols to a separate function
from do_lookup_x in order to make the code more readable.
The new function gets inlined with gcc 4.8 on ARM and the
do_lookup_x code becomes a few bytes smaller.
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c (do_lookup_unique): New function.
(do_lookup_x): Move STB_GNU_UNIQUE handling code
to a separate function.
The glibc makefiles have a standard variable, $(rtld-prefix), to run
the dynamic linker with a default --library-path option; this is used
as the basis of lots of other variables for running programs compiled
with the newly built library.
A few places however use $(elf-objpfx)ld.so or
$(elf-objpfx)${rtld-installed-name} directly, with such a
--library-path option. This patch makes such places use
$(rtld-prefix) instead. I'm not aware of any significance in these
cases to the choice of ld.so or ${rtld-installed-name} when running
the dynamic linker, or to whether $(patsubst
%,:%,$(sysdep-library-path)) is included in the library-path as it is
in $(rtld-prefix) and just one of the places being changed.
Tested x86_64.
* elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix).
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(rtld-prefix).
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
This patch fixes the tst-tlsmod[5/6].so build in system that uses
-Wl,--as-needed as default in linker option. Without this option
the testing shared library that does not have libc.so in DT_NEEDED
and the tst-tls9-static fails in architecture that use the
./sysdeps/unix/sysv/linux/<arch>/dl-static.c trick.
Roland McGrath
Petar Jovanovic
Joseph Myers
Maxim Ostapenko
Arjun Shankar
Siddhesh Poyarekar
Mike Frysinger
Adhemerval Zanella
Pavel Kopyl
Matthew Fortune
H.J. Lu
Szabolcs Nagy
Dmitry V. Levin
Andrew Senkevich
Mark Wielaard
Florian Weimer
Alan Modra
Alexandre Oliva
Aurelien Jarno
Andreas Schwab
Benno Schulenberg
Carlos O'Donell
Bram
Chung-Lin Tang
Richard Henderson
David S. Miller
Torvald Riegel
Carlos O'Donell
Will Newton
Kostya Serebryany
Maciej W. Rozycki
Ondřej Bílka
Adhemerval Zanella