The nscd database mapped in processes can change at any time. We
have to be more vigilant when it comes to using that memory. Test
the data entries are valid in their entire size, don't read data
again from memory once we verified it, and make sure the trailing
pointer is not going off the deep end.
Because we are not shutting down the other threads first another
thread might work on a query before the process shuts down. In this
case the now uninitialized libselinux and libaudit might be used.
Just don't free the resources. It's not necessary anyway because
the process is about to terminate.
from definition.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Don't define
label if it is not used.
* elf/dl-profile.c (_dl_start_profile): Define real-type variant
of gmon_hist_hdr and gmon_hdr structures and use them.
* elf/dl-load.c (open_verify): Add temporary variable to avoid
warning.
* nscd/nscd_helper.c (get_mapping): Avoid casts to avoid warnings.
* sunrpc/clnt_raw.c (clntraw_private_s): Use union in definition
to avoid cast.
* inet/rexec.c (rexec_af): Make sa2 a union to avoid warnings.
* inet/rcmd.c (rcmd_af): Make from a union of the various needed types
to avoid warnings.
(iruserok_af): Use ss_family instead of casts.
* gmon/gmon.c (write_hist): Define real-type variant of
gmon_hist_hdr structure and use it.
(write_gmon): Likewise for gmon_hdr.
* sysdeps/unix/sysv/linux/readv.c: Avoid declaration of replacement
function if we are not going to define it.
* sysdeps/unix/sysv/linux/writev.c: Likewise.
* inet/inet6_option.c (optin_alloc): Add temporary variable to
avoid warning.
* libio/strfile.h (struct _IO_streambuf): Use correct type and
name of VTable element.
* libio/iovsprintf.c: Avoid casts to avoid warnings.
* libio/iovsscanf.c: Likewise.
* libio/vasprintf.c: Likewise.
* libio/vsnprintf.c: Likewise.
* stdio-common/isoc99_vsscanf.c: Likewise.
* stdlib/strfmon_l.c: Likewise.
* debug/vasprintf_chk.c: Likewise.
* debug/vsnprintf_chk.c: Likewise.
* debug/vsprintf_chk.c: Likewise.
2009-02-13 Ulrich Drepper <drepper@redhat.com>
[BZ #5381]
* nscd/nscd.h: Remove definitions and declarations for mem_in_flight.
Change mempool_alloc prototype.
* nscd/mem.c (gc): Don't handle mem_in_flight.
(mempool_alloc): Third parameter now only indicates whether this is the
first call (to allocate data) or not. If it is, get db rdlock.
Release it on error. Don't handle mem_in_flight.
* nscd/aicache.c (addhstaiX): Mark he parameter as const.
Adjust third parameter of mempool_alloc calls.
Nothing to do here in case mempool_alloc fails.
Avoid local variable shadowing parameter. No need to get db rdlock
before calling cache_add.
* nscd/cache.c (cache_add): Adjust call to mempool_alloc. There is
no mem_in_flight array anymore.
* nscd/connections.c: Remove definition and handling of mem_in_flight.
* nscd/grpcache.c (cache_addgr): Adjust third parameter of
mempool_alloc calls. Mark he parameter as const. Nothing to do here
in case mempool_alloc fails. No need to get db rdlock before calling
cache_add.
* nscd/hstcache.c (cache_addhst): Likewise.
* nscd/initgrcache.c (addinitgroupsX): Likewise.
* nscd/servicescache.c (cache_addserv): Likewise.
* nscd/pwdcache.c (cache_addpw): Likewise. Remove some debugging code.
* elf/ldd.bash.in: Likewise.
* elf/sprof.c: Likewise.
* locale/programs/locale.c: Likewise.
* malloc/memusage.sh: Likewise.
* nss/getent.c: Likewise.
2009-02-06 Joseph Myers <joseph@codesourcery.com>
* debug/pcprofiledump.c (print_version,
argp_program_version_hook): New function.
* elf/ldconfig.c (more_help): New function.
(argp): Use it.
* elf/sln.c (usage): New function.
(main): Support --help and --version.
* malloc/memusagestat.c (print_version): New function.
(argp_program_version_hook): New variable.
* nscd/nscd.c (more_help): New function.
(argp): Use it.
* posix/getconf.c (main): Send --version output to stdout.
Support --help.
* sunrpc/rpc_main.c (usage, options_usage): Take STREAM and STATUS
arguments. All callers changed.
(print_version): New function.
(parseargs): Support --help and --version.
* sunrpc/rpcinfo.c (usage): Take STREAM argument. All callers
changed.
(print_version): New function.
(main): Use getopt_long. Support --help and --version.
* sysdeps/unix/sysv/linux/lddlibc4.c (main): Support --help and
--version.
2009-02-06 Ulrich Drepper <drepper@redhat.com>
* nscd/mem.c (gc): Use alloca_count to get the real stack usage.
* include/alloca.h (alloca_account): Define.
* sysdeps/x86_64/stackinfo.h (stackinfo_get_sp): Define.
(stackinfo_sub_sp): Define.
2009-01-28 Ulrich Drepper <drepper@redhat.com>
[BZ #9741]
* nscd/mem.c (gc): Fix assignment of he_data in case malloc is used.
Reported by Jun'ichi Nomura <j-nomura@ce.jp.nec.com>.
2008-12-03 Petr Baudis <pasky@suse.cz>
[BZ #7067]
* nscd/connections.c (invalidate_cache): Use prune_run_lock
instead of prune_lock.
(nscd_run_prune): Before calling prune_cache, take prune_run_lock.
* nscd/nscd.h (database_dyn): Add prune_run_cache.
__ASSUME_PACCEPT, __ASSUME_IN_NONBLOCK, and __ASSUME_PACCEPT if
appropriate.
* nscd/connections.c: Avoid fcntl calls to set close-on-exec flag and
non-blocking mode by using socket, paccept, and inotify_init1.
fields.
* nscd/connections.c (inotify_fd): New variable.
(nscd_init): Try to open an inotify descriptor.
If successful, watch files for databases using inotify instead of
having prune threads stat the files.
(nscd_run_prune): Recognize clear_cache flag being set and call
prune_cache appropriately.
(main_loop_poll): Add inotify descriptor to wait set and handle the
reported changes.
(main_loop_epoll): Likewise.
* nscd/cache.c (prune_cache): Don't stat files for databases if
inotify is used.
* sysdeps/unix/sysv/linux/Makefile [subdir=nscd]
(CFLAGS-connections.c): Add -DHAVE_INOTIFY.
instead of portstr to nscd_getserv_r. Patch by
Roman Kagan <rkagan@mail.ru>.
2008-06-03 Jakub Jelinek <jakub@redhat.com>
* nscd/nscd_getserv_r.c (__nscd_getservbyport_r): Pass cp
instead of portstr to nscd_getserv_r. Patch by
Roman Kagan <rkagan@mail.ru>.
whether this is in response of a cache refill. Check alignment
of package data. Revamp waking of pruning thread.
(prune_cache): Small optimization.
* nscd/nscd.h: Adjust cache_add prototypes.
* nscd/aicache.c: Adjust cache_add calls.
* nscd/grpcache.c: Likewise.
* nscd/hstcache.c: Likewise.
* nscd/initgrcache.c: Likewise.
* nscd/pwdcache.c: Likewise.
* nscd/servicescache.c: Likewise.
* nscd/connections.c (restart): Really disable cache use before
exec attempt. If it fails, reenable cache.
(nscd_run_prune): Initialize wakeup_time. After wakeup, set wakeup
time to max to be able to notice concurrent cache additions. Unlock
prune_lock while performing gc. Afterwards compute wakeup time with
current wakeup_time value in mind.
is the first use of the record, mark it as unusable.
* nscd/aicache.c: Don't touch the dataset after cache_add returns
reporting a failure.
* nscd/grpcache.c: Likewise
* nscd/hstcache.c: Likewise.
* nscd/initgrcache.c: Likewise.
* nscd/pwdcache.c: Likewise.
* nscd/servicecache.c: Likewise.
prototypes.
* include/arpa/nameser_compat.h: Define T_UNSPEC.
* nis/Versions (libnss_nis): Export _nss_nis_gethostbyname4_r.
(libnss_nisplus): Export _nss_nisplus_gethostbyname4_r.
* nis/nss_nis/nis-hosts.c (LINE_PARSER): Change to also handle
af==AF_UNSPEC.
(_nss_nis_gethostbyname4_r): New function.
* nis/nss_nisplus/nisplus-hosts.c (_nss_nisplus_parse_hostent):
Change to also handle af==AF_UNSPEC.
(get_tablename): New function. Use it to avoid duplication.
(_nss_nisplus_gethostbyname4_r): New function.
* nscd/aicache.c (addhstaiX): Use gethostbyname4_r function is
available.
* nss/Versions (libnss_files): Export _nss_files_gethostbyname4_r.
* nss/nss.h: Define struct gaih_addrtuple.
* nss/nss_files/files-hosts.c (LINE_PARSER): Change to also handle
af==AF_UNSPEC.
(_nss_files_gethostbyname4_r): New function.
* resolv/Versions (libnss_dns): Export _nss_dns_gethostbyname4_r.
* resolv/gethnmaddr.c: Adjust __libc_res_nsearch and __libc_res_nquery
calls.
* resolv/res_query.c (__libc_res_nquery): Take two additional
parameters for second answer buffer. Handle type=T_UNSPEC to mean
look up IPv4 and IPv6.
Change all callers.
* resolv/res_send.c (__libc_res_nsend): Take five aditional parameters
for an additional query and answer buffer. Pass to send_vc and
send_dg.
(send_vc): Send possibly two requests and receive two answers.
(send_dg): Likewise.
* resolv/nss_dns/dns-host.c: Adjust calls to __libc_res_nsearch and
__libc_res_nquery.
(_nss_dns_gethostbyname4_r): New function.
(gaih_getanswer_slice): Likewise.
(gaih_getanswer): Likewise.
* resolv/nss_dns/dns-canon.c (_nss_dns_getcanonname_r): Adjust
__libc_res_nquery call.
* resolv/nss_dns/dns-network.c (_nss_dns_getnetbyaddr_r): Likewise.
(_nss_dns_getnetbyname_r): Adjust __libc_res_nsearch call.
* sysdeps/posix/getaddrinfo.c: Use gethostbyname4_r function is
available.
2008-04-15 Ulrich Drepper <drepper@redhat.com>
[BZ #5209]
* sysdeps/unix/sysv/linux/times.c: New file.
[BZ #5381]
* nscd/nscd.h: Define enum in_flight, mem_in_flight, and
mem_in_flight_list variables. Add new parameter to mempool_alloc
prototype.
* nscd/mem.c (mempool_alloc): Take additional parameter. Initialize
appropriate mem_in_flight element.
(gc): Take allocations which have not yet been committed to the
database into account.
* nscd/cache.c (cache_add): Add new parameter to mempool_alloc call.
Reset mem_in_flight before returning.
* nscd/connections.c (nscd_run_worker): Initialize mem_in_flight and
cue it up in mem_in_flight_list.
* nscd/aicache.c: Adjust mempool_alloc call.
* nscd/grpcache.c: Likewise.
* nscd/hstcache.c: Likewise.
* nscd/initgrcache.c: Likewise.
* nscd/pwdcache.c: Likewise.
* nscd/servicescache.c: Likewise.
* nscd/Makefile (nscd-flags): Until ld is fixed, use -fpic instead
of -fpie.
* nscd/connections.c (handle_request): Provide better error message
in case SELinux forbids the service.
* version.h (VERSION): Bump to 2.8.90.
* nscd/connections.c (dbs): Add initializers for .suggested_module.
(verify_persistent_db): Remove one unnecessary test and add a new one
for bad configuration.
(nscd_init): Improve error reported when persistent database cannot
be reused.
* nscd/nscd.h (DEFAULT_SUGGESTED_MODULE): Define.
* nscd/nscd_conf.c (nscd_parse_file): Provide default values for
.suggested_module and .max_db_size and case config file says the
values are zero.
* nscd/nscd_helper.c (get_mapping): Fail if hash table module is zero.
* nscd/mem.c (MAX_STACK_USE): Remove definition here.
(gc): Initialize stack_used based on allocation in prune_cache.
* nscd/cache.c (prune_cache): Use heap for mark array if necessary.
Clear array bfore use.
* nscd/aicache.c (addhstaiX): Update statistics counter in case
memory allocate failed.
* nscd/nscd.h (NSCD_THREAD_STACKSIZE): Define.
* nscd/connections.c (start_threads): Use NSCD_THREAD_STACKSIZE.
* nscd/mem.c (gc): Don't allocate arrays on stack if it can
overflow it.
* sysdeps/unix/sysv/linux/nscd_setup_thread.c (setup_thread):
Return zero in case thread library is not NPTL.
when the lookup call failed.
* nscd/nscd.h (struct database_dyn): Rename prunelock to prune_lock.
Add prune_cond and wakeup_time.
(CACHE_PRUNE_INTERNAL): Define.
Update declarations of prune_cache and setup_thread.
* nscd/connections.c (dbs): Update initializers.
(CACHE_PRUNE_INTERNAL): Moved to nscd.h.
(nscd_init): Default number of threads is now 4.
(invalidate_cache): Take lock before calling prune_cache.
(handle_request): If SELinux forbids the request, say so.
(readylist_cond): Use static initializer.
(nscd_run_prune): New function. Used only by pruning threads.
(nscd_run_worder): Renamed from nscd_run. Remove support for pruning
here.
(fd_ready): Update nscd_run reference.
(start_threads): No need to initialize readylist_cond.
Start pruning threads separately.
* nscd/nscd_setup_thread.c: Change return value type to int and always
return 0.
* sysdeps/unix/sysv/linux/nscd_setup_thread.c: Change return value type
to int and return nonzero value if we can use the TID address hack.
* nscd/cache.c (cache_add): If next wakeup time of cleanup thread for
the database is later than the new entry's timeout, update the
wakeup time and wake the cleanup thread.
(prune_cache): Return seconds the next entry in the database is still
valid. Remove locking for pruning here.
* nscd/nscd.conf: Document default number of threads.
gethstbynm3_r.
* nscd/gethstbynm2_r.c: Remove.
* nscd/gethstbynm3_r.c: New file.
* nscd/aicache.c (addhstaiX): Use __gethostbyaddr2_r instead of
__gethostbyaddr_r.
* nscd/gethstbyad_r.c: Generate __gethostbyaddr2_r function. Define
__gethostbyaddr_r compatibility wrapper.
* nscd/hstcache.c (cache_addhst): Add ttl parameter. Use it when
determining timeout of entry.
(lookup): Take new parameter and pass it to __gethostbyname3_r and
__gethostbyaddr2_r.
(addhstbyX): Pass reference to variable for TTL to lookup and
cache_addhst.
* nss/Versions [glibc] (GLIBC_PRIVATE): Export __nss_passwd_lookup2,
__nss_group_lookup2, __nss_hosts_lookup2, __nss_services_lookup2,
and __nss_next2. Remove __nss_services_lookup.
* nss/XXX-lookup.c: Name function now *_lookup2. Add new parameter.
Add compat wrapper.
* nss/getXXbyYY_r.c: Changes to call new *_lookup2 functions and
__nss_next2.
* nss/getXXent_r.c: Likewise.
* nss/getnssent_r.c: Likewise.
* nss/nsswitch.c (__nss_lookup): Add new parameter. If first function
does not exist in module, try the optional second name.
(__nss_next2): New function.
(__nss_next): Now wrapper around __nss_next2.
* nss/nsswitch.h: Adjust __nss_lookup prototype.
Declare __nss_next2.
Adjust definition of db_lookup_function type.
* nss/service-lookup.c: Define NO_COMPAT.
* include/netdb.h: Declare __gethostbyaddr2_r and __gethostbyname3_r.
* inet/ether_hton.c: Use __nss_next2 instead of __nss_next.
* inet/ether_ntoh.c: Likewise.
* sunrpc/netname.c: Likewise.
* sunrpc/publickey.c: Likewise.
* inet/getnetgrent.c: Likewise. Adjust calls to __nss_lookup.
* inet/gethstbyad_r.c (DB_LOOKUP_FCT): Change to __nss_hosts_lookup2.
* inet/gethstbynm2_r.c (DB_LOOKUP_FCT): Likewise.
* inet/gethstbynm_r.c (DB_LOOKUP_FCT): Likewise.
* inet/gethstent_r.c (DB_LOOKUP_FCT): Likewise.
* nscd/aicache.c (addhstaiX): Fix default TTL handling.
* inet/getnetgrent.c (setup): Encrypt static pointer.
* time/tzset.c (tzset_internal): Break TZ string parsing out into
__tzset_parse_tz and updating of daylight, timezone, tzname into
update_vars.
(__tz_compute): Renamed from tz_compute. Take additional parameters.
(__tz_convert): Updating of tm_isdst, tm_zone, and tm_gmtoff now
happens in __tz_compute.
* time/tzfile.c (__tzfile_read): Also read TZ string.
(find_transition): Fold into __tzfile_compute.
(__tzfile_compute): For times beyond the last transition try to
use the TZ string.
* timezone/tst-timezone.c: Information in daylight and tzname does
change for Asia/Tokyo timezone with more concrete information.
Remove the test.
* include/stdio.h: Add libc_hidden_proto for ftello.
* libio/ftello.c: Add libc_hidden_def.
* nscd/nscd_getai.c (__nscd_getai): Set errno to 0 in case we found
no entry.
* nscd/nscd_getgr.c (nscd_getgr_r): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Likewise.
* nscd/nscd_getserv_r.c (nscd_getserv_r): Likewise.
2007-10-13 Ulrich Drepper <drepper@redhat.com>
[BZ #3242]
* nscd/nscd_helper.c (wait_on_socket): Take timeout as parameter.
(__readall): If reading failed due to EAGAIN error wait a bit
and possibly try again.
(__readvall): Likewise.
of crashing. When this is the case or if the reply is malformed,
don't try to close the new file descriptor since it does not
exist.
Patch in part by Guillaume Chazarain <guichaz@yahoo.fr>.
2007-03-22 Jakub Jelinek <jakub@redhat.com>
* config.h.in (HAVE_LIBCAP): Add.
* nscd/selinux.h: Include sys/capability.h rather than non-existent
sys/capabilities.h.
* nscd/selinux.c (preserve_capabilities): Use cap_free instead of
free_caps. Cast away const from 4th cap_set_flag argument.
returning.
(PTR_DEMANGLE): Real definition now that it's not the same as
PRT_MANGLE anymore.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise.
* string/strerror_l.c: New file.
* string/Makefile (routines): Add strerror_l.
* string/string.h: Declare strerror_l.
* string/Versions: Export strerror_l for GLIBC_2.6.
* nscd/connections.c (nscd_run): Don't define MAXKEYLEN here.
as parameter. Construct request record. Try sending request
before the first poll use, it usually succeeds. Adjust all
callers.
* nscd/nscd-client.h: Define MAXKEYLEN.
from return value.
* nscd/nscd_helper.c: Include string.h.
(__nscd_cache_search): Remove const qualifier from return value.
On strict alignment architectures check hash entry and data head
alignment.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Don't crash or fail because
mmapped data during GC cycle contains garbage. If
__nscd_drop_map_ref fails, decrement mapped->counter when returning
error or if retrying with NO_MAPPING, only __nscd_unmap if counter
dropped to 0.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/nscd_initgroups.c (__nscd_getgrouplist): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getai.c (__nscd_getai): Likewise.
* nscd/nscd_getserv_r.c (nscd_getserv_r): Likewise.
2007-01-31 Jakub Jelinek <jakub@redhat.com>
* nscd/nscd-client.h (__nscd_cache_search): Remove const qualifier
from return value.
* nscd/nscd_helper.c: Include string.h.
(__nscd_cache_search): Remove const qualifier from return value.
On strict alignment architectures check hash entry and data head
alignment.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Don't crash or fail because
mmapped data during GC cycle contains garbage. If
__nscd_drop_map_ref fails, decrement mapped->counter when returning
error or if retrying with NO_MAPPING, only __nscd_unmap if counter
dropped to 0.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/nscd_initgroups.c (__nscd_getgrouplist): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getai.c (__nscd_getai): Likewise.
* nscd/nscd_getserv_r.c (nscd_getserv_r): Likewise.