2001-01-24 Mark Kettenis <kettenis@gnu.org>
* hurd/hurdsig.c (_hurdsig_getenv): Remove spurious innermost
declaration of value such that we actually return the value of the
environment variable.
2001-01-19 Mark Kettenis <kettenis@gnu.org>
* sysdeps/mach/hurd/chroot.c (chroot): Revert 1999-02-27 changes,
but change looking up the initial directory port in a similar way
as done by _hurd_change_directory_port_from_name.
* hurd/fchroot.c (fchroot): Likewise.
* hurd/hurd/ioctl.h (_HURD_HANDLE_IOCTLS_1): New macro.
(_HURD_HANDLE_IOCTLS, _HURD_HANDLE_IOCTL): Redefine using it, so as to
allow multiple instances using the same function name in one file.
2000-11-13 Marcus Brinkmann <marcus@gnu.org>
* hurd/get-host.c (_hurd_get_host_config): Fix possible buffer
underrun and make sure the result is null terminated even if there
is no trailing newline.
2000-08-22 Mark Kettenis <kettenis@gnu.org>
* hurd/hurdsig.c: Rearrange headers a bit.
(_hurdsig_init): Block until _hurd_msgport_thread is initialized
when cthreads is being used.
2000-07-25 Mark Kettenis <kettenis@gnu.org>
* hurd/thread-cancel.c (hurd_thread_cancel): When cancelling the
calling thread, set the cancellation flag and return success
instead of EINTR.
2000-07-07 Mark Kettenis <kettenis@gnu.org>
* hurd/vpprintf.c [USE_IN_LIBIO]: Include <libioP.h>.
(do_write): Renamed from pwrite.
(vpprintf) [USE_IN_LIBIO]: Adjust for renaming and reshufling of
`struct _IO_cookie_file'.
* mach/Versions (libc: GLIBC_2.0)
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_1)]: Conditionalize
__vm_allocate on this.
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_2)]: Conditionalize
mutex- and spinlock-related symbols on this.
[!SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_2)] (libc: HURD_CTHREADS_0.3):
New version set. Lock-related symbols go here instead in this case.
* sysdeps/mach/hurd/Versions (libc: GLIBC_2.0): Remove
_cthread_exit_routine, _cthread_init_routine, cthread_keycreate,
cthread_getspecific, cthread_setspecific, __libc_getspecific.
* hurd/Versions
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_2)] (libc: GLIBC_2.0):
Put them here instead.
[!SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_2)] (libc: HURD_CTHREADS_0.3):
New version set. Those cthreads symbols go here instead in this case.
* Versions.def (libc) [USE_IN_LIBIO]: Add HURD_CTHREADS_0.3 version.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): For MACH_SEND_INTERRUPTED
and other errors that indicate a pseudo-receive happened, grok through
the message buffer for port rights that need references fixed up.
(input, output): Functions removed.
(mach_open_devstream): Use devstream_{read,write} as cookie functions,
using only the vanilla fopencookie interface.
* hurd/fopenport.c [! USE_IN_LIBIO] (cookie_io_functions_t): Define
as macro for __io_functions.
(funcsio): Use cookie_io_functions_t type name.
(fopenport): Renamed from __fopenport. Rewrite to call fopencookie.
* libio/iofopncook.c (_IO_cookie_init): New function, broken out of
fopencookie.
(fopencookie): Use it.
* libio/libio.h: Declare _IO_cookie_init.
* hurd/vpprintf.c (vpprintf) [USE_IN_LIBIO]: Implement using
_IO_cookie_init.
* libio/libio.h (__io_seek_fn): Fix second argument type
to be a pointer, in line with the manual and the old stdio.
* libio/iofopncook.c (_IO_cookie_seek): Fix (sole) caller.
* sysdeps/generic/bits/stdio-lock.h: New file.
This is a stub with #error, but that's better than no file at all.
* sysdeps/unix/sysv/linux/alpha/syscall.S:
* manual/message.texi (Using gettextized software):
* manual/filesys.texi (File Size):
* manual/charset.texi (glibc iconv Implementation):
* locale/programs/ld-collate.c (collate_output):
* manual/stdio.texi (Output Conversion Syntax):
* hurd/fopenport.c [! USE_IN_LIBIO] (cookie_io_functions_t): Define
as macro for __io_functions.
(funcsio): Use cookie_io_functions_t type name.
(fopenport): Renamed from __fopenport. Rewrite to call fopencookie.
* hurd/hurdsig.c (_hurdsig_init): If __hurd_threadvar_stack_mask is
nonzero, use cthread_fork to create the signal thread.
* hurd/msgportdemux.c (_hurd_msgport_receive): Initialize
_hurd_msgport_thread here (to self).
* sysdeps/mach/hurd/fork.c (__fork): When __hurd_sigthread_stack_end
is zero, instead compute child signal thread's starting SP from parent
signal thread's current SP and the threadvar_stack variables.
* hurd/Versions (GLIBC_2.1.3): Add cthread_fork, cthread_detach.
These are now referenced weakly by _hurdsig_init.
* hurd/report-wait.c (_S_msg_report_wait): Fix typo:
&_hurd_itimer_thread not &_hurd_msgport_thread.
1999-10-01 Roland McGrath <roland@baalperazim.frob.com>
* hurd/hurdfchdir.c (_hurd_change_directory_port_from_fd): Rewrite
without HURD_DPORT_USE to clean up warnings.
* hurd/dtable.c (get_dtable_port): Likewise.
* hurd/hurdioctl.c (rectty_dtable): Renamed to install_ctty.
(install_ctty): Do the changing of the cttyid port cell here, inside
the critical section while we holding the dtable lock.
(_hurd_setcttyid, tiocsctty, tiocnotty): Use that instead of changing
the port cell and calling rectty_dtable.
(_hurd_locked_install_cttyid): New function, split out of install_ctty.
(install_ctty): Use it inside a critical section, with the lock held.
* sysdeps/mach/hurd/setsid.c (__setsid): Use
_hurd_locked_install_cttyid to effect the cttyid and dtable changes
after proc_setsid, having held the dtable lock throughout.
* hurd/dtable.c (ctty_new_pgrp): With the dtable lock held, check the
cttyid port for null and bail out early if so. The dtable lock
serializes us after any cttyid change and its associated dtable update.
* sysdeps/mach/hurd/wait4.c (__wait4): When proc_wait returns EAGAIN,
return zero to indicate no children died yet (assuming WNOHANG).
* sysdeps/mach/hurd/setsid.c: #include <hurd/fd.h>.
1999-09-17 Roland McGrath <roland@baalperazim.frob.com>
* hurd/port2fd.c (_hurd_port2fd): Never change CTTYID port.
* sysdeps/mach/hurd/setsid.c (__setsid): Fix return type -> pid_t.
Return _hurd_pgrp instead of 0.
* hurd/new-fd.c (_hurd_new_fd): Initialize fcntl flags.
* hurd/port2fd.c (_hurd_port2fd): Reset the fcntl flags when
installing PORT in the descriptor cell.
1999-08-19 Roland McGrath <roland@baalperazim.frob.com>
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Mark OPTION and
TIMEOUT as outputs of the asm to indicate that the signal thread
might mutate them.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Short circuit to plain
mach_msg if only sending or only receiving (i.e., not an RPC). When
making an RPC that might get interrupted, save OPTION and the portion
of the message buffer that gets clobbered by an EINTR reply message,
and properly restore them before attempting to retry the request
message send.
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Mark OPTION and
TIMEOUT as outputs of the asm to indicate that the signal thread
might mutate them.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Short circuit to plain
mach_msg if only sending or only receiving (i.e., not an RPC). When
making an RPC that might get interrupted, save OPTION and the portion
of the message buffer that gets clobbered by an EINTR reply message,
and properly restore them before attempting to retry the request
message send.
* sysdeps/mach/_strerror.c: Include <libintl.h>.
1999-07-19 Roland McGrath <roland@baalperazim.frob.com>
* hurd/hurdsig.c (_hurd_internal_post_signal): If a
hurd_signal_preemptor matches but its `preemptor' field is null, use
its `handler' field directly. This is to comply with behavior
documented in <hurd/sigpreempt.h>.
hurd/hurd/threadvar.h, hurd/hurd/userlink.h: Instead of
_EXTERN_INLINE, use a macro specific to each file,
_HURD_FD_H_EXTERN_INLINE and the like.
* hurd/Makefile (inline-headers): New variable.
(routines): Remove hurdinline. Add $(inlines).
(inlines): New variable.
($(inlines:%=$(objpfx)%.c)): New static pattern rule to generate them.
(generated): Append those here.
* hurd/hurdinline.c: File removed.
* sysdeps/mach/hurd/read.c (__libc_read): Just call __pread with
OFFSET argument of (off_t) -1.
* sysdeps/mach/hurd/write.c (__libc_write): Just call __pwrite with
OFFSET argument of (off_t) -1.
* sysdeps/mach/hurd/pwrite.c: New file.
* sysdeps/mach/hurd/pread.c: New file.
* hurd/fd-read.c (_hurd_fd_read): Take new parameter OFFSET and
pass it in the RPC instead of always -1.
* hurd/fd-write.c (_hurd_fd_write): Likewise.
* hurd/hurd/fd.h: Update decls.
* hurd/hurdinit.c (_hurd_new_proc_init): Don't do initial SIGTRAP if
EXEC_SIGTRAP was set in the incoming exec flags--that indicates the
exec server simulated a SIGTRAP before we even started up, so gdb is
already happy.
* hurd/STATUS: File removed. Moved items that are still relevant into
TODO list in hurd source.
1999-03-26 Mark Kettenis <kettenis@gnu.org>
* sysdeps/mach/hurd/bits/time.h: New file.
* sysdeps/mach/hurd/getrusage.c: New file.
* sysdeps/mach/hurd/clk_tck.c: New file.
* sysdeps/mach/hurd/Versions (libc) [GLIBC_2.1.1]: Add __libc_clk_tck.
* sysdeps/mach/hurd/Makefile [$(subdir) = posix]
(sysdep_routines): Add clk_tck.
* sysdeps/mach/hurd/times.c: Removed, since getrusage is now
implemented.
* sysdeps/mach/hurd/ioctl.c (__ioctl): Move the marshalling of the
arguments into the request message buffer inside `send_rpc'
subfunction. We must repeat the marshalling when retrying the RPC
after a SIGTTOU delivery.
* hurd/ctty-input.c (_hurd_ctty_input): Use early short-circuit code
path when there is no ctty port.
* hurd/ctty-output.c (_hurd_ctty_output): Likewise.
Move sigstate check inside loop so we recheck after handling a signal.
* sysdeps/mach/hurd/bits/fcntl.h
[__USE_GNU] (O_NOFOLLOW, O_DIRECTORY): New macros.
* hurd/hurdlookup.c (__hurd_file_name_lookup): If O_NOFOLLOW is set,
set O_NOTRANS as well.
(__hurd_file_name_lookup_retry): At successful end of lookup,
if O_NOFOLLOW set, io_stat the resultant port and fail with ENOENT if
it is a translated node not owned by root.
(__hurd_file_name_lookup): If O_DIRECTORY is set, put a trailing slash
on the file name passed to LOOKUP.
Mark Kettenis