This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
We setup $(READELF) and use it everywhere, so fix the two places
that were using readelf directly.
Reported-by: Denis M. <god@politeia.in>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
db-symbols.awk relies on English-language readelf output to find the
beginning of the symbol table, so force the locale.
Without this change, "make check" fails in non-English locales:
| diff -p -U 0 ../sysdeps/unix/sysv/linux/x86_64/64/nptl/libthread_db.abilist [...]/nptl_db/libthread_db.symlist
| readelf -W -s [...]/nptl/libpthread.so | gawk -f [...]/nptl_db/db-symbols.v.i > [...]/nptl_db/db-symbols.out
| make[2]: *** [[...]/nptl_db/db-symbols.out] Erreur 1
(cfsetospeed): Only set c_ospeed under [_HAVE_STRUCT_TERMIOS_C_OSPEED].
(cfsetispeed): Only set c_ispeed under [_HAVE_STRUCT_TERMIOS_C_ISPEED].
* sysdeps/unix/sysv/linux/bits/termios.h
(_HAVE_STRUCT_TERMIOS_C_ISPEED, _HAVE_STRUCT_TERMIOS_C_OSPEED): Define.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
2002-11-26 Ulrich Drepper <drepper@redhat.com>
* allocatestack.c (queue_stack): Don't remove stack from list here.
Do it in the caller. Correct condition to prematurely terminate
loop to free stacks.
(__deallocate_stack): Remove stack from list here.
2002-11-26 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Add tst-stack1.
* tst-stack1.c: New file.
* allocatestack.c (allocate_stack): Initialize the TCB on a user
provided stack.
* pthread_attr_getstack.c: Return bottom of the thread area.
2002-11-25 Ulrich Drepper <drepper@redhat.com>
* Makefile (libpthread-routines): Add pt-allocrtsig and
pthread_kill_other_threads.
* pt-allocrtsig.c: New file.
* pthread_kill_other_threads.c: New file.
* sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for
all three functions.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
allocrtsig.
* sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export
__libc_current_sigrtmin_private, __libc_current_sigrtmax_private,
and __libc_allocate_rtsig_private.
* Versions (libpthread): Export pthread_kill_other_threads_np,
__libc_current_sigrtmin, and __libc_current_sigrtmax.
2002-11-24 Ulrich Drepper <drepper@redhat.com>
* allocatestack.c (allocate_stack): stackaddr in attribute points to
the end of the stack. Adjust computations.
When mprotect call fails dequeue stack and free it.
* pthread_attr_setstack.c: Store top of the stack in stackaddr
attribute.
* pthread_getattr_np.c: Likewise.
* descr.h (IS_DETACHED): Add some more parenthesis to prevent
surprises.
2002-11-23 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/pthread.h (pthread_self): __THROW must come before
attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>.
2002-11-22 Ulrich Drepper <drepper@redhat.com>
* pthread_getspecific.c: Optimize access to first 2nd-level array.
* pthread_setspecific.c: Likewise.
2002-11-21 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags
definitions. Get them from the official place.
* sysdeps/unix/sysv/linux/i386/fork.c: Likewise.
* sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags.
Use new CLONE_ flags in clone() calls.
* sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork.
* sysdeps/unix/sysv/linux/i386/fork.c: New file.
* Versions: Add pthread_* functions for libc.
* forward.c: New file.
* sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add
errno-loc.
* herrno.c: New file.
* res.c: New file.
* Makefile (libpthread-routines): Remove sem_post, sem_wait,
sem_trywait, and sem_timedwait. Add herrno and res.
* sem_init.c: Don't initialize lock and waiters members.
* sem_open.c: Likewise.
* sem_post.c: Removed.
* sem_wait.c: Removed.
* sem_trywait.c: Removed.
* sem_timedwait.c: Removed.
* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite.
Includes full implementations of sem_post, sem_wait, sem_trywait,
and sem_timedwait.
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust
for new implementation.
* sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock
and waiters fields.
* tst-sem3.c: Improve error message.
* tst-signal3.c: Likewise.
* init.c (__pthread_initialize_minimal): Use set_tid_address syscall
to tell the kernel about the termination futex and to initialize tid
member. Don't initialize main_thread.
* descr.h (struct pthread): Remove main_thread member.
* cancelllation.c (__do_cancel): Remove code handling main thread.
The main thread is not special anymore.
* allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add
size of the stacks to stack_cache_actsize.
* pt-readv.c: Add missing "defined".
* pt-sigwait.c: Likewise.
* pt-writev.c: Likewise.
2002-11-09 Ulrich Drepper <drepper@redhat.com>
* Versions: Export __connect from libpthread.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
* Makefile (libpthread-routines): Add pt-raise.
* sysdeps/unix/sysv/linux/raise.c: New file.
* sysdeps/unix/sysv/linux/pt-raise.c: New file.
* sysdeps/generic/pt-raise.c: New file.
* pthread_cond_init.c: Initialize all data elements of the condvar
structure. Patch by Luca Barbieri <ldb@ldb.ods.org>.
* pthread_attr_init.c: Actually implement 2.0 compatibility version.
* pthread_create.c: Likewise.
* Makefile (tests): Add tst-key1, tst-key2, tst-key3.
* tst-key1.c: New file.
* tst-key2.c: New file.
* tst-key3.c: New file.
* Versions: Export pthread_detach for version GLIBC_2.0.
Reported by Saurabh Desai <sdesai@austin.ibm.com>.
2002-11-08 Ulrich Drepper <drepper@redhat.com>
* pthread_key_create.c: Terminate search after an unused key was found.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
* sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
2002-10-10 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic
dynamic lookup for errno in PIC.
* allocatestack.c (get_cached_stack): Rearrange code slightly to
release the stack lock as soon as possible.
Call _dl_allocate_tls_init for TCB from the cache to re-initialize
the static TLS block.
(allocate_stack): Call _dl_allocate_tls_init for user-provided stack.
* cancellation.c: Renamed from cancelation.c.
* Makefile: Adjust accordingly.
* pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P.
* cleanup_defer.c: Use CANCELLATION_P.
* pthread_testcancel.c: Likewise.
* descr.h: Fix spelling in comments.
* init.c: Likewise.
* pthread_getattr_np.c: Likewise.
* pthread_getschedparam.c: Likewise.
* pthread_setschedparam.c: Likewise.
* Versions: Likewise.
* pt-pselect.c: New file.
* Makefile (libpthread-routines): Add pt-pselect.
* Versions: Add pselect.
* tst-cancel4.c: New file.
* Makefile (tests): Add tst-cancel4.
2002-10-09 Ulrich Drepper <drepper@redhat.com>
* pthread_mutex_lock.c: Always record lock ownership.
* pthread_mutex_timedlock.c: Likewise.
* pthread_mutex_trylock.c: Likewise.
* pt-readv.c: New file.
* pt-writev.c: New file.
* pt-creat.c: New file.
* pt-msgrcv.c: New file.
* pt-msgsnd.c: New file.
* pt-poll.c: New file.
* pt-select.c: New file.
* pt-sigpause.c: New file.
* pt-sigsuspend.c: New file.
* pt-sigwait.c: New file.
* pt-sigwaitinfo.c: New file.
* pt-waitid.c: New file.
* Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat,
pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend,
pt-sigwait, pt-sigwaitinfo, and pt-waitid.
* Versions: Add all the new functions.
* tst-exit1.c: New file.
* Makefile (tests): Add tst-exit1.
* sem_timedwait.c: Minor optimization for more optimal fastpath.
2002-10-08 Ulrich Drepper <drepper@redhat.com>
* pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW.
* pthread_join.c: Enable asynchronous cancellation around lll_wait_tid
call. pthread_join is an official cancellation point.
* pthread_timedjoin.c: Likewise.
* pthread_cond_wait.c: Revert order in which internal lock are dropped
and the condvar's mutex are retrieved.
* pthread_cond_timedwait.c: Likewise.
Reported by dice@saros.East.Sun.COM.
2002-10-07 Ulrich Drepper <drepper@redhat.com>
* pthreadP.h: Cut out all type definitions and move them...
* sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file.
* pthreadP.h: Include <internaltypes.h>.
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little
performance tweaks.
* sem_trywait.c: Shuffle #includes around to get right order.
* sem_timedwait.c: Likewise.
* sem_post.c: Likewise.
* sem_wait.c: Likewise.
* nptl 0.3 released.
* Makefile (tests): Add tst-signal3.
* tst-signal3.c: New file.
2002-10-05 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that
the asms modify the sem object.
(__lll_sem_timedwait): Now takes struct sem* as first parameter.
* sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose
the actual members.
* pthreadP.h (struct sem): New type. Actual semaphore type.
* semaphoreP.h: Include pthreadP.h.
* sem_getvalue.c: Adjust to sem_t change.
* sem_init.c: Likewise.
* sem_open.c: Likewise.
* sem_post.c: Likewise.
* sem_timedwait.c: Likewise.
* sem_trywait.c: Likewise.
* sem_wait.c: Likewise.
2002-10-04 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3.
* tst-basic2.c: New file.
* tst-exec1.c: New file.
* tst-exec2.c: New file.
* tst-exec3.c: New file.
* tst-fork1.c: Remove extra */.
* nptl 0.2 released. The API for IA-32 is complete.
Joseph Myers