Commit Graph

274 Commits

Author SHA1 Message Date
Zack Weinberg 7c3018f9e4 Suppress internal declarations for most of the testsuite.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.

There are still quite a few tests that need to see internal gunk of
one variety or another.  For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'.  There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.

There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all.  (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.)  When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.

The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change.  They should be
relatively self-explanatory.  In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.

	* Makerules: New subdir configuration variables 'tests-internal'
	and 'test-internal-extras'.  Test files in these categories will
	still be compiled with MODULE_NAME=nonlib.  Test files in the
	existing categories (tests, xtests, test-srcs, test-extras) are
	now compiled with MODULE_NAME=testsuite.
	New subdir configuration variable 'modules-names-tests'.  Files
	which are in both 'modules-names' and 'modules-names-tests' will
	be compiled with MODULE_NAME=testsuite instead of
	MODULE_NAME=extramodules.
	(gen-as-const-headers): Move to tests-internal.
	(do-tests-clean, common-mostlyclean): Support tests-internal.
	* Makeconfig (built-modules): Add testsuite.
	* Makefile: Change libof-check-installed-headers-c and
	libof-check-installed-headers-cxx to 'testsuite'.
	* Rules: Likewise.  Support tests-internal.
	* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
	Remove extra-modules.mk.

	* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
	* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
	PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
	very top of the file and rationalize their order.
	If MODULE_NAME is not defined at all, define IS_IN to always be
	false, and don't define _ISOMAC.
	If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
	true, define _ISOMAC and suppress everything else in this file,
	starting with the inclusion of config.h.
	Do check for inappropriate definitions of __OPTIMIZE__ and
	__FAST_MATH__ here, but only if _ISOMAC is not defined.
        Correct some out-of-date commentary.

	* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
	and _Mlong_double_ before including math.h.
	* include/string.h: If _ISOMAC is defined, don't expose
	_STRING_ARCH_unaligned. Move a comment to a more appropriate
	location.

	* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
	* include/time.h, include/unistd.h, include/wchar.h: No need to
	check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.

	* misc/sys/cdefs.h (__NTHNL): New macro.
	* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
	(__m81_defun): Use __NTHNL to avoid errors with GCC 6.

	* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
	defined, for HAVE_TUNABLES.
	* inet/tst-checks-posix.c: No need to define _ISOMAC.
	* intl/tst-gettext2.c: Provide own definition of N_.
	* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
	* math/test-signgam-main.c: No need to define _ISOMAC.
	* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
	* stdlib/tst-strtod1i.c: ...this new file.
	* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
        Split tests of __strtod_internal to...
	* stdlib/tst-strtod5i.c: ...this new file.
	* string/test-string.h: Include stdint.h. Duplicate definition of
	inhibit_loop_to_libcall here (from libc-symbols.h).
	* string/test-strstr.c: Provide dummy definition of
	libc_hidden_builtin_def when including strstr.c.
	* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
	mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
	* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
	Don't include init-arch.h.

	* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
	tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
	unload, unload2, circleload1, neededtest, neededtest2,
	neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
	tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
	tst-stackguard1, tst-_dl_addr_inside_object, and all of the
	ifunc tests to tests-internal.
	Don't add $(modules-names) to test-extras.
	* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
	Add tst-deadline to tests-static-internal.
	* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
	tests-internal.
	* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
	* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
	tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
	tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
	tst-sem12-static, and tst-stackguard1-static to tests-internal.
        Link tests-internal with libpthread also.
	Don't add $(modules-names) to test-extras.
	* nss/Makefile: Move tst-field to tests-internal.
	* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
	tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
	* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
	tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
	tests-internal.
        * sunrpc/Makefile: Move tst-svc_register to tests-internal.
	* sysdeps/powerpc/Makefile: Move test-get_hwcap and
	test-get_hwcap-static to tests-internal.
	* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
	tests-internal.
	* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
	modules-names-tests.
2017-05-11 19:27:59 -04:00
Joseph Myers 2072f5c34e Remove C++ namespace handling from glibc headers.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.

As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000.  I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.

The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed.  The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
	(__END_NAMESPACE_STD): Likewise.
	(__USING_NAMESPACE_STD): Likewise.
	(__BEGIN_NAMESPACE_C99): Likewise.
	(__END_NAMESPACE_C99): Likewise.
	(__USING_NAMESPACE_C99): Likewise.
	* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
	undefine macro.
	(_Mdouble_END_NAMESPACE): Likewise.
	* ctype/ctype.h: Do not handle C++ namespaces.
	* libio/bits/stdio-ldbl.h: Likewise.
	* libio/stdio.h: Likewise.
	* locale/locale.h: Likewise.
	* math/bits/mathcalls.h: Likewise.
	* setjmp/setjmp.h: Likewise.
	* signal/signal.h: Likewise.
	* stdlib/bits/stdlib-float.h: Likewise.
	* stdlib/bits/stdlib-ldbl.h: Likewise.
	* stdlib/stdlib.h: Likewise.
	* string/string.h: Likewise.
	* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
	* time/bits/types/clock_t.h: Likewise.
	* time/bits/types/struct_tm.h: Likewise.
	* time/bits/types/time_t.h: Likewise.
	* time/time.h: Likewise.
	* wcsmbs/bits/wchar-ldbl.h: Likewise.
	* wcsmbs/uchar.h: Likewise.
	* wcsmbs/wchar.h: Likewise.
	[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
	* wctype/wctype.h: Do not handle C++ namespaces.
	* scripts/begin-end-check.pl: Remove.
	* Makefile (installed-headers): Likewise.
	(tests-special): Do not add $(objpfx)begin-end-check.out.
	($(objpfx)begin-end-check.out): Remove.
2017-03-16 13:31:57 +00:00
Joseph Myers bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Zack Weinberg 4775578486 Installed header hygiene (BZ#20366): Test of installed headers.
This adds a test to ensure that the problems fixed in the last several
patches do not recur.  Each directory checks the headers that it
installs for two properties: first, each header must be compilable in
isolation, as both C and C++, under a representative combination of
language and library conformance levels; second, there is a blacklist
of identifiers that may not appear in any installed header, currently
consisting of the legacy BSD typedefs.  (There is an exemption for the
headers that define those typedefs, and for the RPC headers.  It may be
necessary to make this more sophisticated if we add more stuff to the
blacklist in the future.)

In order for this test to work correctly, every wrapper header
that actually defines something must guard those definitions with
 #ifndef _ISOMAC.  This is the existing mechanism used by the conform/
tests to tell wrapper headers not to define anything that the public
header wouldn't, and not to use anything from libc-symbols.h.  conform/
only cares for headers that we need to check for standards conformance,
whereas this test applies to *every* header.  (Headers in include/ that
are either installed directly, or are internal-use-only and do *not*
correspond to any installed header, are not affected.)

	* scripts/check-installed-headers.sh: New script.
	* Rules: In each directory that defines header files to be installed,
	run check-installed-headers.sh on them as a special test.
	* Makefile: Likewise for the headers installed at top level.

	* include/aliases.h, include/alloca.h, include/argz.h
	* include/arpa/nameser.h, include/arpa/nameser_compat.h
	* include/elf.h, include/envz.h, include/err.h
	* include/execinfo.h, include/fpu_control.h, include/getopt.h
	* include/gshadow.h, include/ifaddrs.h, include/libintl.h
	* include/link.h, include/malloc.h, include/mcheck.h
	* include/mntent.h, include/netinet/ether.h
	* include/nss.h, include/obstack.h, include/printf.h
	* include/pty.h, include/resolv.h, include/rpc/auth.h
	* include/rpc/auth_des.h, include/rpc/auth_unix.h
	* include/rpc/clnt.h, include/rpc/des_crypt.h
	* include/rpc/key_prot.h, include/rpc/netdb.h
	* include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h
	* include/rpc/pmap_rmt.h, include/rpc/rpc.h
	* include/rpc/rpc_msg.h, include/rpc/svc.h
	* include/rpc/svc_auth.h, include/rpc/xdr.h
	* include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h
	* include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h
	* include/rpcsvc/ypupd.h, include/shadow.h
	* include/stdio_ext.h, include/sys/epoll.h
	* include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h
	* include/sys/prctl.h, include/sys/profil.h
	* include/sys/statfs.h, include/sys/sysctl.h
	* include/sys/sysinfo.h, include/ttyent.h, include/utmp.h
	* sysdeps/arm/nacl/include/bits/setjmp.h
	* sysdeps/mips/include/sys/asm.h
	* sysdeps/unix/sysv/linux/include/sys/sysinfo.h
	* sysdeps/unix/sysv/linux/include/sys/timex.h
	* sysdeps/x86/fpu/include/bits/fenv.h:
	Add #ifndef _ISOMAC guard around internal declarations.
	Add multiple-inclusion guard if not already present.
2016-09-23 08:43:56 -04:00
Joseph Myers 487890009e Support __STDC_WANT_LIB_EXT2__ feature test macro.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.

Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.

This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>.  Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested.  __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.

It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.

No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.

As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so.  But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* bits/libc-header-start.h: New file.
	* Makefile (headers): Add bits/libc-header-start.h.
	* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
	(__GLIBC_USE): New macro.
	* libio/stdio.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
	(open_memstream): Likewise.
	(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
	(__asprintf): Likewise.
	(asprintf): Likewise.
	(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
	(getdelim): Likewise.
	(getline): Likewise.
	* string/string.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
	(strndup): Likewise.
	* wcsmbs/wchar.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
	* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
2016-08-02 17:40:35 +00:00
Roland McGrath 684ce7e0fc Fix edito in last change. 2016-03-04 15:45:35 -08:00
Roland McGrath 1241b50b23 Conditionalize c++-types-check.out addition to tests-special. 2016-03-04 15:07:12 -08:00
Roland McGrath 00db8bf4db Fix c++-types-check conditionalization. 2016-03-04 13:22:00 -08:00
Joseph Myers f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Florian Weimer c100dca32a Implement "make update-all-abi"
* scripts/update-abilist.sh: New file.
	* Makefile (+subdir_targets): Add subdir_update-all-abi.
	* Makerules (update-all-abi-%, update-all-abi)
	(subdir_update-all-abi): New targets.
	* elf/Makefile (update-all-abi): New target.
2015-11-24 17:10:19 +01:00
Joseph Myers 783dd2d3af Use -std=gnu11 instead of -std=gnu99.
Now that GCC 4.7 or later is required to build glibc, this patch moves
the build from using -std=gnu99 to -std=gnu11 (option added in 4.7).
This allows use of C11 features from GCC's headers, such as new
float.h macros and max_align_t.

Tested for x86_64 and x86 (testsuite; installed stripped shared
libraries are unchanged by the patch on x86_64, while I see some
slight code reordering of no significance on x86).

	* Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99.
	* Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11
	instead of -std=gnu99.
	* configure.ac (systemtap): Test with -std=gnu11 instead of
	-std=gnu99.
	* configure: Regenerated.
	* math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99
	in compilation command in comment.
2015-10-27 21:47:22 +00:00
Joseph Myers f5659917f9 Remove support for removing glibc 2.0 headers.
There is a configure test for the presence of glibc 2.0 headers (that
were renamed / no longer installed in glibc 2.1) and associated
support for removing them on "make install".

Normal practice for subsequent removal / renaming of installed files
has been not to do anything special about removing them; if you want
installed files from an old installation removed reliably, you need to
use a packaging system that tracks what files were installed by a
previous glibc package (via installing in an intermediate directory
with install_root).  I think it's been long enough since 2.0 that it's
not particularly useful to have that special logic for those old
headers either; this patch removes it.

Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).

	* configure.ac (old_glibc_headers): Remove configure test.
	* configure: Regenerated.
	* config.make.in (old-glibc-headers): Remove variable.
	* Makefile [!$(install_root) && $(old-glibc-headers) = yes]
	(install): Remove dependency on remove-old-headers.
	(headers2_0): Remove variable.
	(remove-old-headers): Remove rule.
2015-10-26 22:46:04 +00:00
Joseph Myers 8e2f7c6811 Use -Wold-style-definition.
This patch makes glibc build with -Wold-style-definition to avoid
old-style function definitions creeping back in by accident.

Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).  Also tested build for arm,
mips64 and powerpc32.  Hopefully there aren't any remaining
system-specific files with old-style definitions whose formatting
evaded my searches, but if there are, they will be easy to fix.

	* Makeconfig (+gccwarn-c): Add -Wold-style-definition.
	* Makefile ($(objpfx)c++-types-check.out): Filter out
	$(+gccwarn-c) instead of -Wstrict-prototypes.
2015-10-21 15:14:13 +00:00
Carlos O'Donell 3b2cc56dbc Prevent check-local-headers.sh hang.
Consensus in [1] was that the right way to fix this was simply to
redirect from /dev/null to terminate the test if no inputs was found
by the tests own globbing e.g. "*/*.{o,os,oS}.d" This can happen when
the build is incomplete and the tests are started. This failure causes
check-local-headers.sh to hang forever waiting for input from stdin.
This change makes the test terminate immediately if the glob doesn't
return any files.

[1] https://sourceware.org/ml/libc-alpha/2014-12/msg00337.html
2015-09-14 09:57:58 -04:00
Joseph Myers 625cd00f22 Don't install bits/libc-lock.h or bits/stdio-lock.h.
The bits/libc-lock.h and bits/stdio-lock.h headers are installed, but
not used by any other installed header.

Accordingly, this patch stops these headers from being installed.  A
followup is intended to move these headers out of the bits/ namespace.

Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).

	* Makefile (headers): Remove bits/libc-lock.h.
	* libio/Makefile (headers): Remove bits/stdio-lock.h.
2015-09-03 20:25:55 +00:00
Siddhesh Poyarekar 99db95db37 Succeed if make check does not report any errors
The conditional that evaluates if there are any FAILed test cases
currently always fails, since we ensure it fails if we find any
unexpected results in tests.sum and it would obviously fail if it does
not find failed results in tests.sum.  This patch fixes this by simply
inverting the result of the egrep, i.e. succeed if egrep fails (to
find failed results) and fail if it succeeds.

Tested with 'make subdirs=localedata check' and 'make subdirs=locale
check' where all tests succeed and with 'make subdirs=elf check' where
a couple of tests fail for me.

	 * Makefile (summarize-tests): Fix return value on success.
2015-05-19 06:36:29 +05:30
Roland McGrath 44a6213c8e Let tests result in UNSUPPORTED; use that for unbuildable C++ cases 2015-03-10 15:13:14 -07:00
Joseph Myers b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Joseph Myers fc00cf7bcd Move semaphore.h to sysdeps/pthread/.
Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.

This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so
that it can be found by builds from all glibc subdirectories; it's not
in any way NPTL-specific.  (I left the Makefile setting to install
this header in nptl/, but maybe it should move as well - it's just not
clear to me what ifeq ($(subdir),...) conditional should be used to
select the directory to associate the header with for installation
purposes.  The path in the toplevel Makefile used for begin-end-check
also remains hardcoded; it's a known todo issue to rework that test to
run in each subdirectory checking the headers installed from that
subdirectory, rather than a separate hardcoded list.)

Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).  I did *not* test a
configuration such as that in which Carlos saw failure.

	* nptl/semaphore.h: Move to ...
	* sysdeps/pthread/semaphore.h: ... here.
	* Makefile (installed-headers): Change nptl/semaphore.h to
	sysdeps/pthread/semaphore.h.
2014-12-11 22:58:48 +00:00
Stefan Liebler 38bbbb9f32 Fix pthread.h in installed-headers list. 2014-06-13 16:39:23 -07:00
Joseph Myers 686554bff6 Remove redundant C locale settings.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.

LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C.  LC_ALL=C also takes
precedence over LANGUAGE, since

2001-01-02  Ulrich Drepper  <drepper@redhat.com>

	* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
	value is ignored if the selected locale is the C locale.
	* intl/tst-gettext.c: Set locale for above change.
	* intl/tst-translit.c: Likewise.

and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set.  One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.

This patch removes the redundant settings.  It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).

If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation.  However, I don't think we
need to be concerned about pre-2001 build tools.

Tested x86_64.

	* Makefile (install): Don't set LANGUAGE.
	* Makefile.in (install): Likewise.
	* assert/Makefile (test-assert-ENV): Remove variable.
	(test-assert-perr-ENV): Likewise.
	* elf/Makefile (neededtest4-ENV): Likewise.
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* io/ftwtest-sh (LANG): Remove variable.
	* libio/Makefile (tst-widetext-ENV): Likewise.
	* manual/install.texi (Running make install): Don't refer to
	environment settings for make install.
	* INSTALL: Regenerated.
	* nptl/tst-tls6.sh: Don't set LANG.
	* posix/globtest.sh (LANG): Remove variable.
	* string/Makefile (tester-ENV): Likewise.
	(inl-tester-ENV): Likewise.
	(noinl-tester-ENV): Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* timezone/Makefile (build-testdata): Use $(built-program-cmd)
	without explicit environment settings.

localedata/ChangeLog:
	* tst-fmon.sh: Don't set LANGUAGE.
	* tst-locale.sh: Likewise.
2014-06-07 19:58:36 +00:00
Joseph Myers 4134b50d67 Consistently use $(elf-objpfx).
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated.  This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).

Tested x86_64, including that installed shared libraries are unchanged
by the patch.

	* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
	(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.
	(link-libc-before-gnulib): Likewise.
	(elfobjdir): Remove variable.
	* Makefile (install): Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.
	* Makerules (link-libc-args): Use $(elf-objpfx) instead of
	$(elfobjdir)/.
	(link-libc-deps): Likewise.
	($(common-objpfx)libc.so): Likewise.
	($(common-objpfx)linkobj/libc.so): Likewise.
	[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
	instead of $(common-objpfx)elf/.
	(symbolic-link-list): Likewise.
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Likewise.
	* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
	$(elfobjdir)/.
	(static-gnulib-arch): Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.

localedata/ChangeLog:
	* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.
2014-05-21 16:52:08 +00:00
Joseph Myers d6fe5e582d Do not terminate default test runs on test failure.
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.

Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.

The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation.  In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.

This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure).  Instead, the summary
tests.sum may contain tests that FAILed.  At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines.  In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).

Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism.  (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)

Tested x86_64.

	* scripts/evaluate-test.sh: Handle fourth argument to determine
	whether test run should stop on failure.
	* Makeconfig (stop-on-test-failure): New variable.
	(evaluate-test): Pass fourth argument to evaluate-test.sh based on
	$(stop-on-test-failure).
	* Makefile (tests): Give a summary of results from testing and
	exit with failure status if they include an ERROR or FAIL.
	(xtests): Likewise.
	* manual/install.texi (Configuring and compiling): Mention
	stop-on-test-failure=y.
	* INSTALL: Regenerated.
2014-03-14 21:02:40 +00:00
Joseph Myers 265d52abcb Generate overall summary of test results.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.

A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this).  Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).

Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.

Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.

	* scripts/merge-test-results.sh: New file.
	* Makefile (tests-special-notdir): New variable.
	(tests): Run merge-test-results.sh.
	(xtests): Likewise.
	* Rules (tests-special-notdir): New variable.
	(xtests-special-notdir): Likewise.
	(tests): Run merge-test-results.sh
	(xtests): Likewise.
2014-03-07 03:25:57 +00:00
Joseph Myers f214606a0e Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.

In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.

Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that.  Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present).  Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.

For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration.  Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets.  This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.

Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before.  We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.

It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable.  The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.

The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out.  If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.

Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.

	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(tests): Depend on $(tests-special).
	* Makerules (check-abi-list): New variable.
	(check-abi): Depend on $(check-abi-list).
	[$(subdir) = elf] (tests-special): Add
	$(objpfx)check-abi-libc.out.
	[$(build-shared) = yes && subdir] (tests-special): Add
	$(check-abi-list).
	[$(build-shared) = yes && subdir] (tests): Do not depend on
	check-abi.
	* Rules (tests): Depend on $(tests-special).
	(xtests): Depend on $(xtests-special).
	* catgets/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* conform/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* elf/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* grp/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* iconv/Makefile (xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* iconvdata/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* intl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.  Also add
	$(objpfx)tst-gettext.out.
	* io/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* libio/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* malloc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* misc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl_db/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* posix/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* resolv/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* stdio-common/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(do-tst-unbputc): Remove target.
	(do-tst-printf): Likewise.
	* stdlib/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* string/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* sysdeps/x86/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.

localedata:
	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
Joseph Myers f0881698bf Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules.  This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.

Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.

Tested x86_64.

	* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
	($(objpfx)check-local-headers.out): Likewise.
	($(objpfx)begin-end-check.out): Likewise.
	* Makerules (check-abi-%.out): Likewise.
	* catgets/Makefile ($(objpfx)test1.cat): Likewise.
	($(objpfx)test2.cat): Likewise.
	($(objpfx)de/libc.cat): Likewise.
	($(objpfx)test-gencat.out): Likewise.
	* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
	* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
	($(objpfx)noload-mem): Likewise.
	($(objpfx)tst-pathopt.out): Likewise.
	($(objpfx)tst-rtld-load-self.out): Likewise.
	($(objpfx)tst-array1-cmp.out): Likewise.
	($(objpfx)tst-array1-static-cmp.out): Likewise.
	($(objpfx)tst-array2-cmp.out): Likewise.
	($(objpfx)tst-array3-cmp.out): Likewise.
	($(objpfx)tst-array4-cmp.out): Likewise.
	($(objpfx)tst-array5-cmp.out): Likewise.
	($(objpfx)tst-array5-static-cmp.out): Likewise.
	($(objpfx)check-textrel.out): Likewise.
	($(objpfx)check-execstack.out): Likewise.
	($(objpfx)check-localplt.out): Likewise.
	($(objpfx)order2-cmp.out): Likewise.
	($(objpfx)tst-leaks1-mem): Likewise.
	($(objpfx)tst-leaks1-static-mem): Likewise.
	($(objpfx)tst-initorder-cmp.out): Likewise.
	($(objpfx)tst-initorder2-cmp.out): Likewise.
	($(objpfx)tst-unused-dep.out): Likewise.
	($(objpfx)tst-unused-dep-cmp.out): Likewise.
	* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
	* iconv/Makefile (test-iconvconfig): Likewise.
	* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
	($(objpfx)iconv-test.out): Likewise.
	($(objpfx)tst-tables.out): Likewise.
	* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
	($(objpfx)tst-gettext.out): Likewise.
	($(objpfx)tst-translit.out): Likewise.
	($(objpfx)tst-gettext2.out): Likewise.
	($(objpfx)tst-gettext4.out): Likewise.
	($(objpfx)tst-gettext6.out): Likewise.
	* io/Makefile ($(objpfx)ftwtest.out): Likewise.
	* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
	($(objpfx)tst-fopenloc-cmp.out): Likewise.
	($(objpfx)tst-fopenloc-mem.out): Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
	* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
	* posix/Makefile ($(objpfx)globtest.out): Likewise.
	($(objpfx)wordexp-tst.out): Likewise.
	($(objpfx)annexc.out): Likewise.
	($(objpfx)tst-fnmatch-mem): Likewise.
	($(objpfx)bug-regex2-mem): Likewise.
	($(objpfx)bug-regex14-mem): Likewise.
	($(objpfx)bug-regex21-mem): Likewise.
	($(objpfx)bug-regex31-mem): Likewise.
	($(objpfx)tst-vfork3-mem): Likewise.
	($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
	($(objpfx)tst-pcre-mem): Likewise.
	($(objpfx)tst-boost-mem): Likewise.
	($(objpfx)tst-getconf.out): Likewise.
	($(objpfx)bug-ga2-mem): Likewise.
	($(objpfx)bug-glob2-mem): Likewise.
	* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
	($(objpfx)mtrace-tst-leaks2): Likewise.
	* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
	($(objpfx)tst-printf.out): Likewise.
	($(objpfx)tst-setvbuf1.out): Likewise.
	($(objpfx)tst-setvbuf1-cmp.out): Likewise.
	* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
	($(objpfx)tst-fmtmsg.out): Likewise.
	* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
	* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.

localedata:
	* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
	($(objpfx)tst-fmon.out): Likewise.
	($(objpfx)tst-numeric.out): Likewise.
	($(objpfx)tst-locale.out): Likewise.
	($(objpfx)tst-rpmatch.out): Likewise.
	($(objpfx)tst-trans.out): Likewise.
	($(objpfx)tst-mbswcs.out): Likewise.
	($(objpfx)tst-ctype.out): Likewise.
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.

nptl:
	* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
	($(objpfx)tst-tls6.out): Likewise.
	($(objpfx)tst-cleanup0.out): Likewise.
	($(objpfx)tst-cleanup0-cmp.out): Likewise.
	($(objpfx)tst-cancel-wrappers.out): Likewise.
	($(objpfx)tst-oddstacklimit.out): Likewise.

nptl_db:
	* Makefile ($(objpfx)db-symbols.out): Use
	$(evaluate-test).
2014-02-21 21:48:08 +00:00
Joseph Myers dd7b064cca Remove reference to subdir_lint.out.
The toplevel Makefile's subdir_targets variable refers to
subdir_lint.out.  As far as I can tell, this is not defined or
referenced anywhere else in the tree.  Having .out makefile references
that don't refer to the output from testcases seems confusing; this
patch removes the reference to subdir_lint.out.

Tested x86_64.

	* Makefile (subdir_targets): Remove subdir_lint.out.
2014-02-12 23:37:13 +00:00
Allan McRae d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Siddhesh Poyarekar d136c6dc1e BZ #15941: Fix INSTALL file regeneration failure with makeinfo 5.x
I have skipped regenerating the INSTALL file because we want to
continue using the 4.x generator for now.
2013-12-05 09:58:20 +05:30
Mike Frysinger cb8a6dbd17 rename configure.in to configure.ac
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-10-30 17:32:08 +10:00
Brooks Moses 5f855e3598 Fix erroneous (and circular) implied pattern rule for linkobj/libc.so.
[BZ #15915] As described in the bug, the pattern rule for lib%.so files
in Makerules includes linkobj/libc.so as a dependency.  However, the
explicit rule for linkobj/libc.so is in the top-level Makefile.

Thus, the subdirectory makefiles that include Makerules end up with an
erroneous makefile pattern rule for linkobj/libc.so that includes
itself as a dependency.  The result is make warnings whenever rules
for other .so files are resolved -- and, on occasion, actual makefile
failures when a race condition causes the implicit rule to actually be
used.

This patch moves the explicit rules for linkobj/libc.so into Makerules
to clear up this problem.  It also elaborates a couple of comments
that I'd initially found confusing.
2013-10-03 10:38:14 -07:00
Roland McGrath bd81123a8b Cope without sunrpc. 2013-08-27 10:59:57 -07:00
Joseph Myers b31469d0d4 Remove trailing blank lines when generating INSTALL. 2013-08-20 16:41:25 +00:00
Joseph Myers fab7ce3f5b Link extra-libs consistently with libc and ld.so. 2013-05-31 16:16:33 +00:00
H.J. Lu 740b3dbee8 Add --enable-hardcoded-path-in-tests configure option 2013-01-11 07:14:18 -08:00
Joseph Myers 568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Joseph Myers 4e87147f34 Remove $(format-me) and fix indentation. 2012-11-09 23:01:03 +00:00
Joseph Myers 8b748aed2a Support --with-pkgversion and --with-bugurl. 2012-11-09 22:13:45 +00:00
H.J. Lu 691bc9c1e4 Remove gnu/stubs.h dependency on soversions.mk 2012-09-07 14:09:34 -07:00
H.J. Lu d22e28b070 Use LD_SO to set $ld_so_name/$ld_so_version 2012-08-29 06:45:37 -07:00
Joseph Myers bd29910a8a Move c++-types baselines to sysdeps directories. 2012-07-17 14:44:06 +00:00
H.J. Lu 0ab0291b84 Convert WORDSIZE[32|64]/ld entries to abi-variants 2012-05-30 08:33:26 -07:00
Andreas Jaeger 7ac30cc5f0 Move FAQ to wiki
The FAQ is now at http://sourceware.org/glibc/wiki/FAQ and not
anymore part of the repository.
2012-05-03 09:46:57 +02:00
Joseph Myers be22ce65d7 Remove NOTES. 2012-03-21 16:56:28 +00:00
Joseph Myers 1f77f0491f Use Texinfo macros to refer to the GNU C Library within the manual. 2012-02-28 14:44:20 +00:00
Joseph Myers ff3b3d8278 Move __STDC_* predefined macros from features.h to stdc-predef.h. 2012-02-22 12:53:04 +00:00
Paul Eggert 59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper 92963737c4 Remove support for automatic cvs check-ins
CVS use for glibc is long gone.
2011-09-08 23:19:04 -04:00
Roland McGrath a6928d5102 Fix remaining explicit uses of shlib.lds to use $(shlib-lds). 2011-07-14 20:49:27 -07:00
Roland McGrath 84f9ea0f73 Generate testrun.sh to use relative directory names. 2011-07-02 16:03:04 -07:00