Commit Graph

1238 Commits

Author SHA1 Message Date
Andriy Rysin 6afb9c0175 Fix sorting order for Ukrainian locale (BZ 17293)
In the introduction for the official orthography rules for Ukrainian
language (http://spelling.ulif.org.ua/peredmova.htm) there's a note
that only apostrophe does not affect order of the words when sorting.
As could be seen from the official alphabet the soft sign
(U+044C/U+042C) has its hard position and thus affects the order and
also letters "е" and "є" (CYR-IE: U+0435/U+0415 and UKR-IE:
U+0454/U+0404) have their own positions and should have separate place
when sorting.
This also corresponds to official Unicode collation chart for these
letters: http://unicode.org/charts/collation/chart_Cyrillic.html
2015-05-26 23:51:18 +05:30
Carlos O'Donell 6c307927ac Fail locale installation if localedef fails.
If any locale fails to compile then the installation
of locales via `make localedata/install-locales`
also fails.
2015-05-16 02:14:49 -04:00
Marko Myllynen c3cc2cf35a Fix bo_CN and bo_IN.
Both bo_CN and bo_IN were not compiling. The following fix
gets them into a usable state again giving a clean build
result for `make localedata/install-locales`.
2015-05-16 01:40:04 -04:00
Leonhard Holz 9f53d7ad57 Split locale generation snippet into a separate file
This patch prepares for the strcoll benchmark by moving the makefile
code for generating the locale files into a standalone snippet that
can be used elsewhere.
2015-05-13 13:05:28 +05:30
Stefan Liebler e1b6cb04f5 Adjust tst-strfmon1 after da_DK locale change.
This patch adjusts the expected currency symbol kr to kr. after commit
"Update currency_symbol in da_DK"
(92566b4922) which changed it.

* tst-strfmon1.c (tests): Update expected currency symbol.
2015-05-11 09:15:36 +02:00
Christian Schmidt 92566b4922 Update currency_symbol in da_DK 2015-05-07 11:56:56 +05:30
Stefan Liebler 920a0395ba Use correct signedness in wcsncmp
[BZ #18206]
	* wcsmbs/wcsncmp.c (wcsncmp): Compare as wchar_t, not wint_t.
	  Use signed comparision instead of substraction to avoid
	  overflow bug.
	* localedata/tests-mbwc/tst_wcsncmp.c (tst_wcsncmp):
	  Take the sign of ret.
	* localedata/tests-mbwc/dat_wcsncmp.c (tst_wcsncmp_loc):
	  Do not expect precise return values. Only the sign matters.
	* wcsmbs/Makefile (strop-tests): Add wcsncmp.
	* wcsmbs/test-wcsncmp.c: New File.
	* string/test-strncmp.c: Add wcsncmp support.
2015-04-13 21:25:04 +02:00
Stefan Liebler 7378b1f8f8 Update tst_mbrlen/tst_mbrtowc for mblen change
commit 9781a37002 changed the expected
results for mbrlen in case of passing n=0 to -2. The initialization of
tst_mbrlen_loc and tst_mbrtowc should be updated accordingly.

	* tests-mbwc/dat_mbrlen.c (tst_mbrlen_loc): Change expected
	result to -2 in case of n == 0.
	* tests-mbwc/tst_mbrtowc.c (tst_mbrtowc): Check result against
	-2 instead of 0.
2015-04-10 15:45:53 -07:00
Roland McGrath 9162c01d09 Avoid re-exec-self in bug-setlocale1. 2015-03-05 12:58:49 -08:00
Alexandre Oliva 7b1ec6a05c Amendments to Unicode 7 update.
for  ChangeLog

	* include/stdc-predef.h (__STDC_ISO_10646__): Update to
	201304L, for Unicode 7.

for  localedata/ChangeLog

	* unicode-gen/ctype_compatibility.py: Use date ranges in
	copyright notice.
	* unicode-gen/ctype_compatibility_test_cases.py: Likewise.
	* unicode-gen/gen_unicode_ctype.py: Likewise.
	* unicode-gen/utf8_compatibility.py: Likewise.
	* unicode-gen/utf8_gen.py: Likewise.  Use upper case for
	global variables, use tuples for global constant arrays.  From
	Mike FABIAN.  Suggested by Mike Frysinger <vapier@gentoo.org>.
2015-02-23 11:35:24 -03:00
Alexandre Oliva 4a4839c94a Unicode 7.0.0 update; added generator scripts.
for  localedata/ChangeLog

	[BZ #17588]
	[BZ #13064]
	[BZ #14094]
	[BZ #17998]
	* unicode-gen/Makefile: New.
	* unicode-gen/unicode-license.txt: New, from Unicode.
	* unicode-gen/UnicodeData.txt: New, from Unicode.
	* unicode-gen/DerivedCoreProperties.txt: New, from Unicode.
	* unicode-gen/EastAsianWidth.txt: New, from Unicode.
	* unicode-gen/gen_unicode_ctype.py: New generator, from Mike
	FABIAN <mfabian@redhat.com>.
	* unicode-gen/ctype_compatibility.py: New verifier, from
	Pravin Satpute <psatpute@redhat.com> and Mike FABIAN.
	* unicode-gen/ctype_compatibility_test_cases.py: New verifier
	module, from Mike FABIAN.
	* unicode-gen/utf8_gen.py: New generator, from Pravin Satpute
	and Mike FABIAN.
	* unicode-gen/utf8_compatibility.py: New verifier, from Pravin
	Satpute and Mike FABIAN.
	* charmaps/UTF-8: Update.
	* locales/i18n: Update.
	* gen-unicode-ctype.c: Remove.
	* tst-ctype-de_DE.ISO-8859-1.in: Adjust, islower now returns
	true for ordinal indicators.
2015-02-20 20:14:59 -02:00
Marek Polacek 86bba162b5 Fix tst_wcscpy.c test. 2015-01-21 12:30:42 +01:00
Leonhard Holz 0f9e585480 Fix memory handling in strxfrm_l [BZ #16009]
[Modified from the original email by Siddhesh Poyarekar]

This patch solves bug #16009 by implementing an additional path in
strxfrm that does not depend on caching the weight and rule indices.

In detail the following changed:

* The old main loop was factored out of strxfrm_l into the function
do_xfrm_cached to be able to alternativly use the non-caching version
do_xfrm.

* strxfrm_l allocates a a fixed size array on the stack. If this is not
sufficiant to store the weight and rule indices, the non-caching path is
taken. As the cache size is not dependent on the input there can be no
problems with integer overflows or stack allocations greater than
__MAX_ALLOCA_CUTOFF. Note that malloc-ing is not possible because the
definition of strxfrm does not allow an oom errorhandling.

* The uncached path determines the weight and rule index for every char
and for every pass again.

* Passing all the locale data array by array resulted in very long
parameter lists, so I introduced a structure that holds them.

* Checking for zero src string has been moved a bit upwards, it is
before the locale data initialization now.

* To verify that the non-caching path works correct I added a test run
to localedata/sort-test.sh & localedata/xfrm-test.c where all strings
are patched up with spaces so that they are too large for the caching path.
2015-01-13 11:33:56 +05:30
Joseph Myers b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Joseph Myers 47d51f4f07 Clean up localedata tests printf formats, don't use -Wno-format. 2014-12-11 13:15:08 -08:00
Pravin Satpute 01839a33ec New locale raj_IN (#16857) 2014-12-01 15:23:47 +05:30
Pravin Satpute 2687f47b20 New locale ce_RU (BZ #17192) 2014-12-01 15:18:33 +05:30
Tatiana Udalova fb89b46d1d New Bhilodi and Tulu locales (BZ #17475) 2014-11-12 17:06:39 +05:30
Arjun Shankar 29955b5d96 Modify several tests to use test-skeleton.c
This patch modifies several test cases to use test-skeleton.c.
It was generated by a bash script written for this purpose and
thus excludes several other tests which I deemed worth a visual
inspection before making the change.

I intend to follow up with individual patches to the tests
skipped by the script.

The script itself resides at http://git.io/WODAmg and should
reproduce this very patch when run against master.

ChangeLog:

2014-10-30  Arjun Shankar  <arjun.is@lostca.se>

	* catgets/test-gencat.c: Use test-skeleton.c.
	* catgets/tst-catgets.c: Likewise.
	* csu/tst-empty.c: Likewise.
	* elf/tst-audit2.c: Likewise.
	* elf/tst-global1.c: Likewise.
	* elf/tst-pathopt.c: Likewise.
	* elf/tst-piemod1.c: Likewise.
	* elf/tst-tls10.c: Likewise.
	* elf/tst-tls11.c: Likewise.
	* elf/tst-tls12.c: Likewise.
	* gnulib/tst-gcc.c: Likewise.
	* iconvdata/tst-e2big.c: Likewise.
	* iconvdata/tst-loading.c: Likewise.
	* iconv/tst-iconv1.c: Likewise.
	* iconv/tst-iconv2.c: Likewise.
	* inet/test-inet6_opt.c: Likewise.
	* inet/tst-gethnm.c: Likewise.
	* inet/tst-network.c: Likewise.
	* inet/tst-ntoa.c: Likewise.
	* intl/tst-codeset.c: Likewise.
	* intl/tst-gettext2.c: Likewise.
	* intl/tst-gettext3.c: Likewise.
	* intl/tst-ngettext.c: Likewise.
	* intl/tst-translit.c: Likewise.
	* io/test-stat.c: Likewise.
	* libio/test-fmemopen.c: Likewise.
	* libio/tst-freopen.c: Likewise.
	* libio/tst-sscanf.c: Likewise.
	* libio/tst-ungetwc1.c: Likewise.
	* libio/tst-ungetwc2.c: Likewise.
	* libio/tst-widetext.c: Likewise.
	* localedata/tst-ctype.c: Likewise.
	* localedata/tst-digits.c: Likewise.
	* localedata/tst-leaks.c: Likewise.
	* localedata/tst-mbswcs1.c: Likewise.
	* localedata/tst-mbswcs2.c: Likewise.
	* localedata/tst-mbswcs3.c: Likewise.
	* localedata/tst-mbswcs4.c: Likewise.
	* localedata/tst-mbswcs5.c: Likewise.
	* localedata/tst-setlocale.c: Likewise.
	* localedata/tst-trans.c: Likewise.
	* localedata/tst-wctype.c: Likewise.
	* localedata/tst-xlocale1.c: Likewise.
	* login/tst-grantpt.c: Likewise.
	* malloc/tst-calloc.c: Likewise.
	* malloc/tst-malloc.c: Likewise.
	* malloc/tst-mallocstate.c: Likewise.
	* malloc/tst-mcheck.c: Likewise.
	* malloc/tst-mtrace.c: Likewise.
	* malloc/tst-obstack.c: Likewise.
	* math/atest-exp2.c: Likewise.
	* math/atest-exp.c: Likewise.
	* math/atest-sincos.c: Likewise.
	* math/test-matherr.c: Likewise.
	* math/test-misc.c: Likewise.
	* math/test-powl.c: Likewise.
	* math/tst-definitions.c: Likewise.
	* misc/tst-dirname.c: Likewise.
	* misc/tst-efgcvt.c: Likewise.
	* misc/tst-fdset.c: Likewise.
	* misc/tst-hsearch.c: Likewise.
	* misc/tst-mntent2.c: Likewise.
	* nptl/tst-sem7.c: Likewise.
	* nptl/tst-sem8.c: Likewise.
	* nptl/tst-sem9.c: Likewise.
	* nss/test-netdb.c: Likewise.
	* posix/tst-fnmatch.c: Likewise.
	* posix/tst-getlogin.c: Likewise.
	* posix/tst-gnuglob.c: Likewise.
	* posix/tst-mmap.c: Likewise.
	* pwd/tst-getpw.c: Likewise.
	* resolv/tst-inet_ntop.c: Likewise.
	* rt/tst-timer.c: Likewise.
	* stdio-common/test-fseek.c: Likewise.
	* stdio-common/test-popen.c: Likewise.
	* stdio-common/test-vfprintf.c: Likewise.
	* stdio-common/tst-cookie.c: Likewise.
	* stdio-common/tst-fileno.c: Likewise.
	* stdio-common/tst-gets.c: Likewise.
	* stdio-common/tst-obprintf.c: Likewise.
	* stdio-common/tst-perror.c: Likewise.
	* stdio-common/tst-sprintf2.c: Likewise.
	* stdio-common/tst-sprintf3.c: Likewise.
	* stdio-common/tst-sprintf.c: Likewise.
	* stdio-common/tst-swprintf.c: Likewise.
	* stdio-common/tst-tmpnam.c: Likewise.
	* stdio-common/tst-unbputc.c: Likewise.
	* stdio-common/tst-wc-printf.c: Likewise.
	* stdlib/tst-environ.c: Likewise.
	* stdlib/tst-fmtmsg.c: Likewise.
	* stdlib/tst-limits.c: Likewise.
	* stdlib/tst-rand48-2.c: Likewise.
	* stdlib/tst-rand48.c: Likewise.
	* stdlib/tst-random2.c: Likewise.
	* stdlib/tst-random.c: Likewise.
	* stdlib/tst-strtol.c: Likewise.
	* stdlib/tst-strtoll.c: Likewise.
	* stdlib/tst-tls-atexit.c: Likewise.
	* stdlib/tst-xpg-basename.c: Likewise.
	* string/test-ffs.c: Likewise.
	* string/tst-bswap.c: Likewise.
	* string/tst-inlcall.c: Likewise.
	* string/tst-strtok.c: Likewise.
	* string/tst-strxfrm.c: Likewise.
	* sysdeps/x86_64/tst-audit10.c: Likewise.
	* sysdeps/x86_64/tst-audit3.c: Likewise.
	* sysdeps/x86_64/tst-audit4.c: Likewise.
	* sysdeps/x86_64/tst-audit5.c: Likewise.
	* time/tst-ftime_l.c: Likewise.
	* time/tst-getdate.c: Likewise.
	* time/tst-mktime3.c: Likewise.
	* time/tst-mktime.c: Likewise.
	* time/tst-posixtz.c: Likewise.
	* time/tst-strptime2.c: Likewise.
	* time/tst-strptime3.c: Likewise.
	* wcsmbs/tst-btowc.c: Likewise.
	* wcsmbs/tst-mbrtowc.c: Likewise.
	* wcsmbs/tst-mbsrtowcs.c: Likewise.
	* wcsmbs/tst-wchar-h.c: Likewise.
	* wcsmbs/tst-wcpncpy.c: Likewise.
	* wcsmbs/tst-wcrtomb.c: Likewise.
	* wcsmbs/tst-wcsnlen.c: Likewise.
	* wcsmbs/tst-wcstof.c: Likewise.
2014-11-05 15:24:08 +05:30
Will Newton 85bb81c91b Allow cross-building of tests
Allow building tests in a cross configuration without a test wrapper
defined. This is helpful for doing simple build testing of tests.

ChangeLog:

2014-09-30  Will Newton  <will.newton@linaro.org>

	* localedata/Makefile: Move assignment to tests-special
	into an ifdef testing run-built-tests.
	* timezone/Makefile: Likewise.
2014-09-30 15:02:41 +01:00
Andreas Schwab e765128355 ChangeLog fix 2014-07-14 10:49:24 +02:00
Florian Weimer 4e8f95a0df _nl_find_locale: Improve handling of crafted locale names [BZ #17137]
Prevent directory traversal in locale-related environment variables
(CVE-2014-0475).
2014-07-10 16:29:55 +02:00
Siddhesh Poyarekar 7c33f1e52c Fix Wundef warning with SHOJI_IS_RIGHT
The macro is not defined anywhere, so it looks like we're convinced
that Shoji is wrong :)
2014-07-08 15:02:58 +05:30
Siddhesh Poyarekar 7892406e35 Fix ChangeLog and NEWS goof-up
The ChangeLog belonged to localedata and the bug is not completely
fixed, so it didn't deserve to enter the NEWS yet.
2014-06-20 17:12:10 +05:30
Stefan Liebler d8c2869d44 Generate en_GB.UTF-8 during testing
This patch generates en_GB.UTF-8, which is used in
tst-strcoll-overflow.  This solves the issue of failing xtests on
s390/s390x.
2014-06-20 07:44:42 +05:30
Joseph Myers 85d8927856 Use $(rtld-prefix) more consistently.
The glibc makefiles have a standard variable, $(rtld-prefix), to run
the dynamic linker with a default --library-path option; this is used
as the basis of lots of other variables for running programs compiled
with the newly built library.

A few places however use $(elf-objpfx)ld.so or
$(elf-objpfx)${rtld-installed-name} directly, with such a
--library-path option.  This patch makes such places use
$(rtld-prefix) instead.  I'm not aware of any significance in these
cases to the choice of ld.so or ${rtld-installed-name} when running
the dynamic linker, or to whether $(patsubst
%,:%,$(sysdep-library-path)) is included in the library-path as it is
in $(rtld-prefix) and just one of the places being changed.

Tested x86_64.

	* elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix).
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Likewise.

localedata/ChangeLog:
	* Makefile (LOCALEDEF): Use $(rtld-prefix).
2014-06-18 10:35:29 +00:00
Joseph Myers 2976feab1f Remove special makefile rules / .sh files for some localedata tests.
The localedata tests tst-mbswcs and tst-wctype use custom .sh scripts
and makefile rules, but have no need to do so.  tst-mbswcs.sh runs a
series of test programs in succession (and nothing special is done
with the output of the programs); this patch makes the separate tests
into ordinary tests run directly by the usual makefile rules.
tst-wctype.sh runs one test with an environment variable and input
redirection; generic makefile rules also cover that, so again this
patch converts it into an ordinary test.  (The makefile dependency of
tst-wctype.out on sort-test.out that this patch removes appears to be
a cut-and-paste error; the test does not appear to use that file.
There is already a generic dependency of ordinary tests in this
directory on $(addprefix $(objpfx),$(CTYPE_FILES)).)

Tested x86_64.

localedata/ChangeLog:
	* Makefile (test-srcs): Remove tst-mbswcs1, tst-mbswcs2,
	tst-mbswcs3, tst-mbswcs4, tst-mbswcs5 and tst-wctype.
	(generated): Remove tst-mbswcs.out.
	(tests): Add tst-mbswcs1, tst-mbswcs2, tst-mbswcs3, tst-mbswcs4,
	tst-mbswcs5 and tst-wctype.
	(tests-special): Remove $(objpfx)tst-mbswcs.out and
	$(objpfx)tst-wctype.out.
	($(objpfx)tst-mbswcs.out): Remove rule.
	($(objpfx)tst-wctype.out): Likewise.
	(tst-wctype-ENV): New variable.
	* tst-mbswcs.sh: Remove file.
	* tst-wctype.sh: Likewise.
2014-06-09 18:19:44 +00:00
Joseph Myers 686554bff6 Remove redundant C locale settings.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.

LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C.  LC_ALL=C also takes
precedence over LANGUAGE, since

2001-01-02  Ulrich Drepper  <drepper@redhat.com>

	* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
	value is ignored if the selected locale is the C locale.
	* intl/tst-gettext.c: Set locale for above change.
	* intl/tst-translit.c: Likewise.

and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set.  One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.

This patch removes the redundant settings.  It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).

If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation.  However, I don't think we
need to be concerned about pre-2001 build tools.

Tested x86_64.

	* Makefile (install): Don't set LANGUAGE.
	* Makefile.in (install): Likewise.
	* assert/Makefile (test-assert-ENV): Remove variable.
	(test-assert-perr-ENV): Likewise.
	* elf/Makefile (neededtest4-ENV): Likewise.
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* io/ftwtest-sh (LANG): Remove variable.
	* libio/Makefile (tst-widetext-ENV): Likewise.
	* manual/install.texi (Running make install): Don't refer to
	environment settings for make install.
	* INSTALL: Regenerated.
	* nptl/tst-tls6.sh: Don't set LANG.
	* posix/globtest.sh (LANG): Remove variable.
	* string/Makefile (tester-ENV): Likewise.
	(inl-tester-ENV): Likewise.
	(noinl-tester-ENV): Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* timezone/Makefile (build-testdata): Use $(built-program-cmd)
	without explicit environment settings.

localedata/ChangeLog:
	* tst-fmon.sh: Don't set LANGUAGE.
	* tst-locale.sh: Likewise.
2014-06-07 19:58:36 +00:00
Joseph Myers 8540f6d2a7 Don't require test wrappers to preserve environment variables, use more consistent environment.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test.  Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers).  In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).

This patch moves to explicitly passing environment variables via
$(test-wrapper-env).  Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.

The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree).  The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.

Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them.  LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C.  So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.

While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile).  So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.

Tested x86_64 (native) and powerpc32 (cross).

	* Makeconfig (run-program-env): New variable.
	(run-program-prefix-before-env): Likewise.
	(run-program-prefix-after-env): Likewise.
	(run-program-prefix): Define in terms of new variables.
	(built-program-cmd-before-env): New variable.
	(built-program-cmd-after-env): Likewise.
	(built-program-cmd): Define in terms of new variables.
	(test-program-prefix-before-env): New variable.
	(test-program-prefix-after-env): Likewise.
	(test-program-prefix): Define in terms of new variables.
	(test-program-cmd-before-env): New variable.
	(test-program-cmd-after-env): Likewise.
	(test-program-cmd): Define in terms of new variables.
	* Rules (make-test-out): Use $(run-program-env).
	* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
	(help): Do not mention environment variables.  Mention
	--timeoutfactor option.
	(timeoutfactor): New variable.
	(blacklist_exports): Remove function.
	(exports): Remove variable.
	(command): Do not include ${exports}.
	* manual/install.texi (Configuring and compiling): Do not mention
	test wrappers preserving environment variables.  Mention that last
	assignment to a variable must take precedence.
	* INSTALL: Regenerated.
	* benchtests/Makefile (run-bench): Use $(run-program-env).
	* catgets/Makefile ($(objpfx)test1.cat): Use
	$(built-program-cmd-before-env), $(run-program-env) and
	$(built-program-cmd-after-env).
	($(objpfx)test2.cat): Do not specify environment variables
	explicitly.
	($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
	$(run-program-env) and $(built-program-cmd-after-env).
	($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
	$(run-program-env) and $(test-program-cmd-after-env).
	($(objpfx)sample.SJIS.cat): Do not specify environment variables
	explicitly.
	* catgets/test-gencat.sh: Use test_program_cmd_before_env,
	run_program_env and test_program_cmd_after_env arguments.
	* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
	* elf/tst-pathopt.sh: Use run_program_env argument.
	* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
	$(test-wrapper-env) and $(run-program-env).
	* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
	run_program_env arguments.
	* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
	* intl/Makefile ($(objpfx)tst-gettext.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	($(objpfx)tst-gettext2.out): Likewise.
	* intl/tst-gettext.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* intl/tst-gettext2.sh: Likewise.
	* intl/tst-gettext4.sh: Do not set environment variables
	explicitly.
	* intl/tst-gettext6.sh: Likewise.
	* intl/tst-translit.sh: Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* math/Makefile (run-regen-ulps): Use $(run-program-env).
	* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
	* nptl/tst-tls6.sh: Use run_program_env argument.  Set LANG=C
	explicitly with each use of ${test_wrapper_env}.
	* posix/Makefile ($(objpfx)wordexp-tst.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	* posix/tst-getconf.sh: Do not set environment variables
	explicitly.
	* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* stdio-common/tst-printf.sh: Do not set environment variables
	explicitly.
	* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	Split $test calls into $test_pre and $test.
	* timezone/Makefile (build-testdata): Use
	$(built-program-cmd-before-env), $(run-program-env) and
	$(built-program-cmd-after-env).

localedata/ChangeLog:
	* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
	$(built-program-cmd-before-env), $(run-program-env) and
	$(built-program-cmd-after-env).
	($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
	$(run-program-env) and $(test-program-prefix-after-env).
	($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
	$(run-program-env) and $(run-program-prefix-after-env).
	($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
	$(run-program-env) and $(built-program-cmd-after-env).
	($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
	$(run-program-env), $(run-program-prefix-after-env),
	$(test-program-prefix-before-env) and
	$(test-program-prefix-after-env).
	($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
	$(run-program-env) and $(test-program-cmd-after-env).
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)tst-langinfo-static.out): Likewise.
	* gen-locale.sh: Use localedef_before_env, run_program_env and
	localedef_after_env arguments.
	* sort-test.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
	tst_ctype_after_env arguments.
	* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
	and run_program_prefix_after_env arguments.
	* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
	and tst_langinfo_after_env arguments.
	* tst-locale.sh: Use localedef_before_env, run_program_env and
	localedef_after_env arguments.
	* tst-mbswcs.sh: Do not set environment variables explicitly.
	* tst-numeric.sh: Likewise.
	* tst-rpmatch.sh: Likewise.
	* tst-trans.sh: Use run_program_prefix_before_env,
	run_program_env, run_program_prefix_after_env,
	test_program_prefix_before_env and test_program_prefix_after_env
	arguments.
	* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
	tst_wctype_after_env arguments.
2014-06-06 22:19:27 +00:00
Andreas Schwab bd1b9d956b Install uz_UZ.UTF-8 locale (BZ #16095) 2014-06-05 15:12:16 +02:00
Joseph Myers 2bf1804182 Include LOCPATH in default test environment.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test.  However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.

This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.

A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH.  Preferably .sh
files should also use the default environment with any additions
required for the individual test.  Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required.  With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).

Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present.  So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.

Tested x86_64 and x86.

	* Rules (make-test-out): Include
	LOCPATH=$(common-objpfx)localedata in default environment.
	* debug/Makefile (tst-chk1-ENV): Remove variable.
	(tst-chk2-ENV): Likewise.
	(tst-chk3-ENV): Likewise.
	(tst-chk4-ENV): Likewise.
	(tst-chk5-ENV): Likewise.
	(tst-chk6-ENV): Likewise.
	(tst-lfschk1-ENV): Likewise.
	(tst-lfschk2-ENV): Likewise.
	(tst-lfschk3-ENV): Likewise.
	(tst-lfschk4-ENV): Likewise.
	(tst-lfschk5-ENV): Likewise.
	(tst-lfschk6-ENV): Likewise.
	* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
	(tst-iconv7-ENV): Likewise.
	* intl/Makefile (LOCPATH-ENV): Likewise.
	(tst-codeset-ENV): Likewise.
	(tst-gettext3-ENV): Likewise.
	(tst-gettext5-ENV): Likewise.
	* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
	(tst-fopenloc-ENV): Likewise.
	(tst-fgetws-ENV): Remove variable.
	(tst-ungetwc1-ENV): Likewise.
	(tst-ungetwc2-ENV): Likewise.
	(bug-ungetwc2-ENV): Likewise.
	(tst-swscanf-ENV): Likewise.
	(bug-ftell-ENV): Likewise.
	(tst-fgetwc-ENV): Likewise.
	(tst-fseek-ENV): Likewise.
	(tst-ftell-partial-wide-ENV): Likewise.
	(tst-ftell-active-handler-ENV): Likewise.
	(tst-ftell-append-ENV): Likewise.
	* posix/Makefile (tst-fnmatch-ENV): Likewise.
	(tst-regexloc-ENV): Likewise.
	(bug-regex1-ENV): Likewise.
	(tst-regex-ENV): Likewise.
	(tst-regex2-ENV): Likewise.
	(bug-regex5-ENV): Likewise.
	(bug-regex6-ENV): Likewise.
	(bug-regex17-ENV): Likewise.
	(bug-regex18-ENV): Likewise.
	(bug-regex19-ENV): Likewise.
	(bug-regex20-ENV): Likewise.
	(bug-regex22-ENV): Likewise.
	(bug-regex23-ENV): Likewise.
	(bug-regex25-ENV): Likewise.
	(bug-regex26-ENV): Likewise.
	(bug-regex30-ENV): Likewise.
	(bug-regex32-ENV): Likewise.
	(bug-regex33-ENV): Likewise.
	(bug-regex34-ENV): Likewise.
	(bug-regex35-ENV): Likewise.
	(tst-rxspencer-ENV): Likewise.
	(tst-rxspencer-no-utf8-ENV): Likewise.
	* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
	(tst-sscanf-ENV): Likewise.
	(tst-swprintf-ENV): Likewise.
	(tst-swscanf-ENV): Likewise.
	(test-vfprintf-ENV): Likewise.
	(scanf13-ENV): Likewise.
	(bug14-ENV): Likewise.
	(tst-grouping-ENV): Likewise.
	* stdlib/Makefile (tst-strtod-ENV): Likewise.
	(tst-strtod3-ENV): Likewise.
	(tst-strtod4-ENV): Likewise.
	(tst-strtod5-ENV): Likewise.
	(testmb2-ENV): Likewise./
	* string/Makefile (tst-strxfrm-ENV): Likewise.
	(tst-strxfrm2-ENV): Likewise.
	(bug-strcoll1-ENV): Likewise.
	(test-strcasecmp-ENV): Likewise.
	(test-strncasecmp-ENV): Likewise.
	* time/Makefile (tst-strptime-ENV): Likewise.
	(tst-ftime_l-ENV): Likewise.
	* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
	(tst-mbrtowc-ENV): Likewise.
	(tst-wcrtomb-ENV): Likewise.
	(tst-mbrtowc2-ENV): Likewise.
	(tst-c16c32-1-ENV): Likewise.
	(tst-mbsnrtowcs-ENV): Likewise.

localedata/ChangeLog:
	* Makefile (TEST_MBWC_ENV): Remove variable.
	(tst_iswalnum-ENV): Likewise.
	(tst_iswalpha-ENV): Likewise.
	(tst_iswcntrl-ENV): Likewise.
	(tst_iswctype-ENV): Likewise.
	(tst_iswdigit-ENV): Likewise.
	(tst_iswgraph-ENV): Likewise.
	(tst_iswlower-ENV): Likewise.
	(tst_iswprint-ENV): Likewise.
	(tst_iswpunct-ENV): Likewise.
	(tst_iswspace-ENV): Likewise.
	(tst_iswupper-ENV): Likewise.
	(tst_iswxdigit-ENV): Likewise.
	(tst_mblen-ENV): Likewise.
	(tst_mbrlen-ENV): Likewise.
	(tst_mbrtowc-ENV): Likewise.
	(tst_mbsrtowcs-ENV): Likewise.
	(tst_mbstowcs-ENV): Likewise.
	(tst_mbtowc-ENV): Likewise.
	(tst_strcoll-ENV): Likewise.
	(tst_strfmon-ENV): Likewise.
	(tst_strxfrm-ENV): Likewise.
	(tst_swscanf-ENV): Likewise.
	(tst_towctrans-ENV): Likewise.
	(tst_towlower-ENV): Likewise.
	(tst_towupper-ENV): Likewise.
	(tst_wcrtomb-ENV): Likewise.
	(tst_wcscat-ENV): Likewise.
	(tst_wcschr-ENV): Likewise.
	(tst_wcscmp-ENV): Likewise.
	(tst_wcscoll-ENV): Likewise.
	(tst_wcscpy-ENV): Likewise.
	(tst_wcscspn-ENV): Likewise.
	(tst_wcslen-ENV): Likewise.
	(tst_wcsncat-ENV): Likewise.
	(tst_wcsncmp-ENV): Likewise.
	(tst_wcsncpy-ENV): Likewise.
	(tst_wcspbrk-ENV): Likewise.
	(tst_wcsrtombs-ENV): Likewise.
	(tst_wcsspn-ENV): Likewise.
	(tst_wcsstr-ENV): Likewise.
	(tst_wcstod-ENV): Likewise.
	(tst_wcstok-ENV): Likewise.
	(tst_wcstombs-ENV): Likewise.
	(tst_wcswidth-ENV): Likewise.
	(tst_wcsxfrm-ENV): Likewise.
	(tst_wctob-ENV): Likewise.
	(tst_wctomb-ENV): Likewise.
	(tst_wctrans-ENV): Likewise.
	(tst_wctype-ENV): Likewise.
	(tst_wcwidth-ENV): Likewise.
	(tst-digits-ENV): Likewise.
	(tst-mbswcs6-ENV): Likewise.
	(tst-xlocale1-ENV): Likewise.
	(tst-xlocale2-ENV): Likewise.
	(tst-strfmon1-ENV): Likewise.
	(tst-strptime-ENV): Likewise.
	(tst-setlocale-ENV): Don't set LOCPATH.
	(bug-iconv-trans-ENV): Remove variable.
	(tst-sscanf-ENV): Likewise.
	(tst-leaks-ENV): Don't set LOCPATH.
	(bug-setlocale1-ENV): Remove variable.
	(bug-setlocale1-static-ENV): Likewise.
	(tst-setlocale2-ENV): Likewise.
2014-06-04 23:37:25 +00:00
Joseph Myers 4134b50d67 Consistently use $(elf-objpfx).
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated.  This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).

Tested x86_64, including that installed shared libraries are unchanged
by the patch.

	* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
	(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.
	(link-libc-before-gnulib): Likewise.
	(elfobjdir): Remove variable.
	* Makefile (install): Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.
	* Makerules (link-libc-args): Use $(elf-objpfx) instead of
	$(elfobjdir)/.
	(link-libc-deps): Likewise.
	($(common-objpfx)libc.so): Likewise.
	($(common-objpfx)linkobj/libc.so): Likewise.
	[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
	instead of $(common-objpfx)elf/.
	(symbolic-link-list): Likewise.
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Likewise.
	* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
	$(elfobjdir)/.
	(static-gnulib-arch): Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.

localedata/ChangeLog:
	* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
	$(common-objpfx)elf/.
2014-05-21 16:52:08 +00:00
Aurelien Jarno ae75a883f2 fix nl_langinfo with static linking (BZ #16915)
For static linking the locale code avoids linking code and data for
unused categories. However for nl_langinfo we know only at runtime which
categories are used, so direct reference to every nl_current_CATEGORY
symbol should be done.

This was broken by commit bc3e1c1273 where
nl_langinfo_l and nl_langinfo have been merged and some code has been
lost in the process.

In order to detect locales issues with static linking, compile a version
of tst-langinfo with static linking.

Note: this is Debian bug#747103 reported by Raphael <raphael.astier@eliot-sa.com>
2014-05-20 18:43:14 +02:00
Joseph Myers 6f99f280b0 Count miscellaneous files built on host for testing as tests.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I
raised the question of counting miscellaneous dependencies of tests,
built on the host rather than the build system, as tests, so that when
test failures don't stop "make check" neither do those other builds on
the host, so that a flaky host doesn't stop "make check" from
producing a complete summary of test results.  Brooks supported that
idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>.

This patch implements that change for all the examples I could find:
one message catalog in catgets/, locales in localedata/ and timezone
files in timezone/.

Tested x86_64.

	* catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat.
	($(objpfx)sample.SJIS.cat): Use $(evaluate-test).
	* timezone/Makefile (testdata): Move definition above include of
	Rules.
	(test-zones): New variable.
	(tests-special): Add zone files.
	(build-testdata): Use $(evaluate-test).

localedata/ChangeLog:
	* Makefile (LOCALES): Move definition above include of Rules.
	(LOCALE_SRCS): Likewise.
	(CHARMAPS): Likewise.
	(CTYPE_FILES): Likewise.
	(tests-special): Add locale files.
	($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
2014-03-07 03:31:41 +00:00
Joseph Myers 0b20a9e89f Make tests consistently use *.out output files.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat).  In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.

In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed.  resolv/Makefile sets both "generate" (which appears
unused) and "generated".  Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted.  I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.

Tested x86_64.

	* elf/Makefile (tests-special): Rename tests to end with .out.
	($(objpfx)noload-mem): Likewise.
	($(objpfx)tst-leaks1-mem): Likewise.
	($(objpfx)tst-leaks1-static-mem.out): Likewise.
	* iconv/Makefile (xtests-special): Change test-iconvconfig to
	$(objpfx)test-iconvconfig.out.
	(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out.  Use
	set -e inside subshell and redirect output to file.
	* iconvdata/Makefile (generated): Rename tests to end with .out.
	Correct type.
	(tests-special): Rename tests to end with .out.
	($(objpfx)mtrace-tst-loading): Likewise.
	* intl/Makefile (generated): Likewise.
	(tests-special): Likewise.
	($(objpfx)mtrace-tst-gettext): Likewise.
	* misc/Makefile (generated): Likewise.
	(tests-special): Likewise.
	($(objpfx)tst-error1-mem): Likewise.
	* nptl/Makefile (tests-special): Likewise.
	($(objpfx)tst-stack3-mem): Likewise.
	(generated): Likewise.
	* posix/Makefile (generated): Likewise.
	(tests-special): Likewise.
	(xtests-special): Likewise.
	($(objpfx)tst-fnmatch-mem): Likewise.
	($(objpfx)bug-regex2-mem): Likewise.
	($(objpfx)bug-regex14-mem): Likewise.
	($(objpfx)bug-regex21-mem): Likewise.
	($(objpfx)bug-regex31-mem): Likewise.
	($(objpfx)tst-vfork3-mem): Likewise.
	($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
	($(objpfx)tst-pcre-mem): Likewise.
	($(objpfx)tst-boost-mem): Likewise.
	($(objpfx)bug-ga2-mem): Likewise.
	($(objpfx)bug-glob2-mem): Likewise.
	* resolv/Makefile (generate): Likewise.
	(tests-special): Likewise.
	(xtests-special): Likewise.
	(generated): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.
	($(objpfx)mtrace-tst-leaks2): Likewise.

localedata:
	* Makefile (generated): Rename tests to end with .out.
	(tests-special): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
Joseph Myers f214606a0e Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.

In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.

Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that.  Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present).  Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.

For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration.  Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets.  This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.

Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before.  We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.

It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable.  The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.

The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out.  If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.

Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.

	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(tests): Depend on $(tests-special).
	* Makerules (check-abi-list): New variable.
	(check-abi): Depend on $(check-abi-list).
	[$(subdir) = elf] (tests-special): Add
	$(objpfx)check-abi-libc.out.
	[$(build-shared) = yes && subdir] (tests-special): Add
	$(check-abi-list).
	[$(build-shared) = yes && subdir] (tests): Do not depend on
	check-abi.
	* Rules (tests): Depend on $(tests-special).
	(xtests): Depend on $(xtests-special).
	* catgets/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* conform/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* elf/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* grp/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* iconv/Makefile (xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* iconvdata/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* intl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.  Also add
	$(objpfx)tst-gettext.out.
	* io/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* libio/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* malloc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* misc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl_db/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* posix/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* resolv/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* stdio-common/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(do-tst-unbputc): Remove target.
	(do-tst-printf): Likewise.
	* stdlib/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* string/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* sysdeps/x86/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.

localedata:
	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
Roland McGrath f08e9a2629 Fix fallout from Joseph's untested Makeconfig change. 2014-02-28 13:00:27 -08:00
Joseph Myers a5f891ac8d Consistently include Makeconfig after defining subdir.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information.  No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.

This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules).  Includes are added if needed, or moved up if already
present.  Subdirectory "all:" targets are removed, since Makeconfig
provides one.

There is potential for further cleanups I haven't done.  Rules and
Makerules have code such as

ifneq   "$(findstring env,$(origin headers))" ""
headers :=
endif

to override to empty any value of various variables that came from the
environment.  I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable.  (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.)  Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves.  The special code to override values coming
from the environment would then be obsolete and could be removed.

Tested x86_64, including that installed binaries are identical before
and after the patch.

	* argp/Makefile: Include Makeconfig immediately after defining
	subdir.
	* assert/Makefile: Likewise.
	* benchtests/Makefile: Likewise.
	* catgets/Makefile: Likewise.
	* conform/Makefile: Likewise.
	* crypt/Makefile: Likewise.
	* csu/Makefile: Likewise.
	(all): Remove target.
	* ctype/Makefile: Include Makeconfig immediately after defining
	subdir.
	* debug/Makefile: Likewise.
	* dirent/Makefile: Likewise.
	* dlfcn/Makefile: Likewise.
	* gmon/Makefile: Likewise.
	* gnulib/Makefile: Likewise.
	* grp/Makefile: Likewise.
	* gshadow/Makefile: Likewise.
	* hesiod/Makefile: Likewise.
	* hurd/Makefile: Likewise.
	(all): Remove target.
	* iconvdata/Makefile: Include Makeconfig immediately after
	defining subdir.
	* inet/Makefile: Likewise.
	* intl/Makefile: Likewise.
	* io/Makefile: Likewise.
	* libio/Makefile: Likewise.
	(all): Remove target.
	* locale/Makefile: Include Makeconfig immediately after defining
	subdir.
	* login/Makefile: Likewise.
	* mach/Makefile: Likewise.
	(all): Remove target.
	* malloc/Makefile: Include Makeconfig immediately after defining
	subdir.
	(all): Remove target.
	* manual/Makefile: Include Makeconfig immediately after defining
	subdir.
	* math/Makefile: Likewise.
	* misc/Makefile: Likewise.
	* nis/Makefile: Likewise.
	* nss/Makefile: Likewise.
	* po/Makefile: Likewise.
	(all): Remove target.
	* posix/Makefile: Include Makeconfig immediately after defining
	subdir.
	* pwd/Makefile: Likewise.
	* resolv/Makefile: Likewise.
	* resource/Makefile: Likewise.
	* rt/Makefile: Likewise.
	* setjmp/Makefile: Likewise.
	* shadow/Makefile: Likewise.
	* signal/Makefile: Likewise.
	* socket/Makefile: Likewise.
	* soft-fp/Makefile: Likewise.
	* stdio-common/Makefile: Likewise.
	* stdlib/Makefile: Likewise.
	* streams/Makefile: Likewise.
	* string/Makefile: Likewise.
	* sunrpc/Makefile: Likewise.
	(all): Remove target.
	* sysvipc/Makefile: Include Makeconfig immediately after defining
	subdir.
	* termios/Makefile: Likewise.
	* time/Makefile: Likewise.
	* timezone/Makefile: Likewise.
	(all): Remove target.
	* wcsmbs/Makefile: Include Makeconfig immediately after defining
	subdir.
	* wctype/Makefile: Likewise.

libidn/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

localedata/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
	(all): Remove target.

nptl/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

nptl_db/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26 23:12:03 +00:00
Joseph Myers f0881698bf Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules.  This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.

Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.

Tested x86_64.

	* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
	($(objpfx)check-local-headers.out): Likewise.
	($(objpfx)begin-end-check.out): Likewise.
	* Makerules (check-abi-%.out): Likewise.
	* catgets/Makefile ($(objpfx)test1.cat): Likewise.
	($(objpfx)test2.cat): Likewise.
	($(objpfx)de/libc.cat): Likewise.
	($(objpfx)test-gencat.out): Likewise.
	* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
	* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
	($(objpfx)noload-mem): Likewise.
	($(objpfx)tst-pathopt.out): Likewise.
	($(objpfx)tst-rtld-load-self.out): Likewise.
	($(objpfx)tst-array1-cmp.out): Likewise.
	($(objpfx)tst-array1-static-cmp.out): Likewise.
	($(objpfx)tst-array2-cmp.out): Likewise.
	($(objpfx)tst-array3-cmp.out): Likewise.
	($(objpfx)tst-array4-cmp.out): Likewise.
	($(objpfx)tst-array5-cmp.out): Likewise.
	($(objpfx)tst-array5-static-cmp.out): Likewise.
	($(objpfx)check-textrel.out): Likewise.
	($(objpfx)check-execstack.out): Likewise.
	($(objpfx)check-localplt.out): Likewise.
	($(objpfx)order2-cmp.out): Likewise.
	($(objpfx)tst-leaks1-mem): Likewise.
	($(objpfx)tst-leaks1-static-mem): Likewise.
	($(objpfx)tst-initorder-cmp.out): Likewise.
	($(objpfx)tst-initorder2-cmp.out): Likewise.
	($(objpfx)tst-unused-dep.out): Likewise.
	($(objpfx)tst-unused-dep-cmp.out): Likewise.
	* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
	* iconv/Makefile (test-iconvconfig): Likewise.
	* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
	($(objpfx)iconv-test.out): Likewise.
	($(objpfx)tst-tables.out): Likewise.
	* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
	($(objpfx)tst-gettext.out): Likewise.
	($(objpfx)tst-translit.out): Likewise.
	($(objpfx)tst-gettext2.out): Likewise.
	($(objpfx)tst-gettext4.out): Likewise.
	($(objpfx)tst-gettext6.out): Likewise.
	* io/Makefile ($(objpfx)ftwtest.out): Likewise.
	* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
	($(objpfx)tst-fopenloc-cmp.out): Likewise.
	($(objpfx)tst-fopenloc-mem.out): Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
	* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
	* posix/Makefile ($(objpfx)globtest.out): Likewise.
	($(objpfx)wordexp-tst.out): Likewise.
	($(objpfx)annexc.out): Likewise.
	($(objpfx)tst-fnmatch-mem): Likewise.
	($(objpfx)bug-regex2-mem): Likewise.
	($(objpfx)bug-regex14-mem): Likewise.
	($(objpfx)bug-regex21-mem): Likewise.
	($(objpfx)bug-regex31-mem): Likewise.
	($(objpfx)tst-vfork3-mem): Likewise.
	($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
	($(objpfx)tst-pcre-mem): Likewise.
	($(objpfx)tst-boost-mem): Likewise.
	($(objpfx)tst-getconf.out): Likewise.
	($(objpfx)bug-ga2-mem): Likewise.
	($(objpfx)bug-glob2-mem): Likewise.
	* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
	($(objpfx)mtrace-tst-leaks2): Likewise.
	* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
	($(objpfx)tst-printf.out): Likewise.
	($(objpfx)tst-setvbuf1.out): Likewise.
	($(objpfx)tst-setvbuf1-cmp.out): Likewise.
	* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
	($(objpfx)tst-fmtmsg.out): Likewise.
	* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
	* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.

localedata:
	* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
	($(objpfx)tst-fmon.out): Likewise.
	($(objpfx)tst-numeric.out): Likewise.
	($(objpfx)tst-locale.out): Likewise.
	($(objpfx)tst-rpmatch.out): Likewise.
	($(objpfx)tst-trans.out): Likewise.
	($(objpfx)tst-mbswcs.out): Likewise.
	($(objpfx)tst-ctype.out): Likewise.
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.

nptl:
	* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
	($(objpfx)tst-tls6.out): Likewise.
	($(objpfx)tst-cleanup0.out): Likewise.
	($(objpfx)tst-cleanup0-cmp.out): Likewise.
	($(objpfx)tst-cancel-wrappers.out): Likewise.
	($(objpfx)tst-oddstacklimit.out): Likewise.

nptl_db:
	* Makefile ($(objpfx)db-symbols.out): Use
	$(evaluate-test).
2014-02-21 21:48:08 +00:00
Allan McRae d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Chris Leonard 46c0cc3aa5 Add lang_name to various locales. 2013-12-26 19:35:18 -05:00
Chris Leonard 6165840fea fix localedata/ChangeLog 2013-12-20 12:12:00 -05:00
Joseph Myers 4f83f4592e Revert spurious copying of ChangeLog to localedata/ChangeLog. 2013-12-20 16:27:15 +00:00
Chris Leonard 8b67c0d9e2 Add lang_name to various locales. 2013-12-20 11:03:15 -05:00
Toke Høiland-Jørgensen f208205092 Add entries for U00D8 and U00F8. 2013-12-12 14:47:25 -05:00
Marko Myllynen dc14d999e1 Fix Charset comment in fi_FI, fi_FI@euro 2013-12-12 09:24:35 +05:30
Chris Leonard 14b97c7a8c Add lang_name to various locales. 2013-12-01 08:04:54 -05:00
Chris Leonard 2ddb48d376 Add lang_name to various locales. 2013-11-27 15:52:46 -05:00
Chris Leonard 9de41b6958 revert hebrew lang_name addition 2013-11-25 15:36:55 -05:00
Chris Leonard f70893aacf revert hebrew lang_name addition 2013-11-25 15:31:36 -05:00