2004-12-15 Jakub Jelinek <jakub@redhat.com>
* nis/nis_domain_of_r.c (nis_domain_of_r): Use libnsl_hidden_def,
not libnsl_hidden_proto.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S (__clone): Add support
for NPTL where the PID is stored at userlevel and needs to be reset
when CLONE_THREAD is not used.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone): Save
and restore r2 around call to fn.
2004-12-15 Andreas Jaeger <aj@suse.de>
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Mark auto instead
of static, add always_inline attribute.
(elf_machine_rela_relative): Likewise.
(elf_machine_lazy_rel): Likewise.
__NTH instead of __THROW in the inline definition.
* sysdeps/unix/sysv/linux/mips/sys/tas.h (_test_and_set): Likewise.
* sysdeps/mips/bits/dlfcn.h (RTLD_DEEPBIND): New macro.
* sysdeps/unix/sysv/linux/mips/bits/mman.h
(PROT_GROWSDOWN, PROT_GROWSUP): New macros.
Update.
2004-10-19 Wolfram Gloger <wg@malloc.de>
* malloc/hooks.c (mem2chunk_check, top_check): Handle
non-contiguous arena. Reported by Michael Dalton
<mwdalton@stanford.edu> [BZ #457]. Add further checks for top chunk.
2004-12-13 Jakub Jelinek <jakub@redhat.com>
* posix/getconf.c (main): Prepend just $GETCONF_DIR/ instead of
$GETCONF_DIR/_ to spec.
* posix/confstr.c (confstr): Remove leading underscores for
_CS_POSIX_V6_WIDTH_RESTRICTED_ENVS.
2004-12-12 Ulrich Drepper <drepper@redhat.com>
* elf/dl-load.c (_dl_map_object_from_fd): Fix computation of
mapping start. It must take the actual pagesize into account, not
the alignment in the file.
2004-12-11 Ulrich Drepper <drepper@redhat.com>
* malloc/malloc.c (_int_realloc): Add checks for corrupted memory.
(_int_free): Make clear message are result of free() calls.
* malloc/malloc.c (_int_realloc): Remove unnecessary tests for
oldmem and size == 0.
Update.
2004-12-08 Thorsten Kukuk <kukuk@suse.de>
* nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r):
Add check if the value is not an empty string. [BZ #305]
2004-11-29 Jakub Jelinek <jakub@redhat.com>
* stdlib/strtod_l.c (INTERNAL (__STRTOF)): If densize > 2
and numsize < densize, always shift num up by empty + 1 limbs.
2004-12-07 Paolo Bonzini <bonzini@gnu.org>
* posix/regexec.c (proceed_next_node): Simplify treatment of epsilon
nodes. Pass the pushed node to push_fail_stack.
(push_fail_stack): Accept a single node rather than an array
of two epsilon destinations.
(build_sifted_states): Only walk non-epsilon nodes.
(check_arrival): Don't pass epsilon nodes to
check_arrival_add_next_nodes.
(check_arrival_add_next_nodes) [DEBUG]: Abort if an epsilon node is
found.
(check_node_accept): Do expensive checks later.
(add_epsilon_src_nodes): Cache result of merging the inveclosures.
* posix/regex_internal.h (re_dfastate_t): Add non_eps_nodes and
inveclosure.
(re_string_elem_size_at, re_string_char_size_at, re_string_wchar_at,
re_string_context_at, re_string_peek_byte_case,
re_string_fetch_byte_case, re_node_set_compare, re_node_set_contains):
Declare as pure.
* posix/regex_internal.c (create_newstate_common): Remove.
(register_state): Move part of it here. Initialize non_eps_nodes.
(free_state): Free inveclosure and non_eps_nodes.
(create_cd_newstate, create_ci_newstate): Allocate the new
re_dfastate_t here.
2004-12-01 Jakub Jelinek <jakub@redhat.com>
* posix/tst-regex.c: Use defined _POSIX_CPUTIME && _POSIX_CPUTIME >= 0
conditionals instead of defined _POSIX_CPUTIME.
(main): If _POSIX_CPUTIME == 0, call sysconf to see if CPUTIME
option is available.
* posix/tst-regex.c2: Use defined _POSIX_CPUTIME && _POSIX_CPUTIME >= 0
conditionals instead of defined _POSIX_CPUTIME.
(do_test): If _POSIX_CPUTIME == 0, call sysconf to see if CPUTIME
option is available.
* sysdeps/posix/sysconf.c (__sysconf): If _POSIX_CPUTIME resp.
_POSIX_THREAD_CPUTIME is defined to 0, return -1 for the corresponding
_SC_ argument.
piping to cat; when not, don't use the pipe at all.
Pipe to cat in all cases of running the executable.
When direct running exits with code 5, retry running via ${RTLD}.
* elf/rtld.c (process_envvars): If __libc_enable_secure and
mode != normal, exit with exitcode 5.
2004-12-07 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone2): Add support for
NPTL where the PID is stored at userlevel and needs to be reset when
CLONE_THREAD is not used. Restore gp before calling _exit.
2004-12-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
* sysdeps/unix/sysv/linux/sh/clone.S: Clear the frame pointer when
starting a new thread. Add support for NPTL where the PID is stored
at userlevel and needs to be reset when CLONE_THREAD is not used.
2004-12-01 Jakub Jelinek <jakub@redhat.com>
* elf/rtld.c (process_envvars): Don't consider LD_SHOW_AUXV
and LD_DYNAMIC_WEAK if __libc_enable_secure.
If __libc_enable_secure, /etc/suid-debug doesn't exist and
program will be actually run, turn off all debugging.
* sysdeps/generic/unsecvars.h (UNSECURE_ENVVARS): Add LD_DEBUG,
LD_DYNAMIC_WEAK and LD_SHOW_AUXV.
Update.
2004-12-06 Jakub Jelinek <jakub@redhat.com>
* time/tzset.c (tzset_internal): If + or - is seen,
but no offset after it, reset offset to 0. [BZ #601]
* libio/ioseekpos.c (_IO_seekpos_unlocked): Call _IO_SEEKOFF not
for CLOCK_THREAD_CPUTIME_ID, not ENOTSUP.
Use SYSDEP_NANOSLEEP handler before validating CLOCK_ID value.
* rt/tst-timer4.c (TEST_CLOCK, TEST_CLOCK_NANOSLEEP): New macros.
Use them throughout in place of CLOCK_REALTIME and nanosleep.
(do_test) [TEST_CLOCK_MISSING]: Call this macro and if it returns
non-null, punt the test with a message using the string returned.
* rt/tst-timer5.c: New file.
* rt/Makefile (tests): Add it.
* rt/tst-timer4.c (TEST_CLOCK, TEST_CLOCK_NANOSLEEP): New macros.
Use them throughout in place of CLOCK_REALTIME and nanosleep.
(do_test) [TEST_CLOCK_MISSING]: Call this macro and if it returns
non-null, punt the test with a message using the string returned.
* rt/tst-timer5.c: New file.
* rt/Makefile (tests): Add it.
2004-12-01 Paolo Bonzini <bonzini@gnu.org>
* posix/regcomp.c (free_dfa_content, init_dfa): Remove
references to re_dfa_t's subexps field.
(parse_sub_exp, parse_expression): Do not use it. Use
completed_bkref_map instead.
(create_initial_state, peek_token): Store a backreference \N
with opr.idx = N-1.
* posix/regexec.c (proceed_next_node, check_dst_limits, get_subexp):
Likewise.
(check_subexp_limits): Remove useless condition.
* posix/regex_internal.h (re_subexp_t): Remove.
(re_dfa_t): Remove subexps and subexps_alloc field, add
completed_bkref_map.
2004-11-30 Andreas Schwab <schwab@suse.de>
* nis/ypclnt.c (ypprot_err): Remove unused entries.
2004-11-30 Paolo Bonzini <bonzini@gnu.org>
* posix/regexec.c (check_dst_limits_calc_pos_1): Check for
bkref_idx == -1, and don't recurse in that case.
2004-12-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/clone.S: Add support for NPTL where
the PID is stored at userlevel and needs to be reset when CLONE_THREAD
is not used.
* sysdeps/unix/sysv/linux/86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Update uses of RETINSTR.
* sysdeps/unix/sysv/linux/arm/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/arm/mmap64.S: Likewise.
* sysdeps/unix/sysv/linux/arm/socket.S: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
Use it instead of __THUMB_INTERWORK__. Make RETINSTR take
only a condition and a register.
* sysdeps/arm/dl-machine.h: Use __USE_BX__ instead of
__THUMB_INTERWORK__.
(_dl_start_user): Use BX.
* sysdeps/arm/strlen.S: Use DO_RET.
* sysdeps/unix/arm/brk.S, sysdeps/unix/arm/fork.S,
sysdeps/unix/arm/sysdep.S, sysdeps/unix/arm/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S,
sysdeps/unix/sysv/linux/arm/mmap.S,
sysdeps/unix/sysv/linux/arm/mmap64.S,
sysdeps/unix/sysv/linux/arm/socket.S,
sysdeps/unix/sysv/linux/arm/sysdep.h,
sysdeps/unix/sysv/linux/arm/vfork.S: Update uses of RETINSTR.
Ulrich Drepper
Andreas Jaeger
Roland McGrath