The value of PI is never exactly PI in any floating point representation,
and the value of PI/2 is never PI/2. It is wrong to expect cos(M_PI_2l)
to return 0, instead it will return an answer that is non-zero because
M_PI_2l doesn't round to exactly PI/2 in the type used.
That is to say that the correct answer is to do the following:
* Take PI or PI/2.
* Round to the floating point representation.
* Take the rounded value and compute an infinite precision cos or sin.
* Use the rounded result of the infinite precision cos or sin as the
answer to the test.
I used printf to do the type rounding, and Wolfram's Alpha to do the
infinite precision cos calculations.
The following changes bring x86-64 and x86 to 1/2 ulp for two tests.
It shows that the x86 cos implementation is quite good, and that
our test are flawed.
Unfortunately given that the rounding errors are type dependent we
need to fix this for each type. No regressions on x86-64 or x86.
---
2013-04-11 Carlos O'Donell <carlos@redhat.com>
* math/libm-test.inc (cos_test): Fix PI/2 test.
(sincos_test): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerate.
* sysdeps/i386/fpu/libm-test-ulps: Regenerate.
run-via-rtld-prefix checks whether the program to be run is a static
test and skips if it is. This is fine, except that it assumes that
the program to be run is the second $^, which is true only for tests.
This change creates an rtld-prefix, which is simply the dynamic linker
prefix with the necessary arguments and uses that in the non-test
targets.
Document the use of the convenience testrun.sh script for
running the libm test.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
* math/README.libm-test (How can I generate "libm-test-ulps"?):
Use testrun.sh to run libm tests.
The wiki "Regeneration" page has this to say about update ULPs.
"The libm-test-ulps files are semiautomatically updated. To
update an ulps baseline, run each of the failing tests (test-float,
test-double, etc.) with -u; this will generate a file called ULPs;
concatenate each of those files with the existing libm-test-ulps
file, after removing any entries for particularly huge numbers of
ulps that you do not want to mark as expected. Then run
gen-libm-test.pl -n -u FILE where FILE is the concatenated file
produced in the previous step. This generates a file called
NewUlps which is the new sorted version of libm-test-ulps."
The same information is listed in math/README.libm-test, and is a
lot of manual work that you often want to run over-and-over again
while working on a particular test.
The `regen-ulps' convenience target does this automatically for
developers.
We strictly assume the source tree is readonly and add a
new --output-dir option to libm-test.inc to allow for writing
out ULPs to $(objpfx).
When run the new target does the following:
* Starts with the baseline ULPs file.
* Runs each of the libm math tests with -u.
* Adds new changes seen with -u to the baseline.
* Sorts and prepares the test output with gen-libm-test.pl.
* Leaves math/NewUlps in your build tree to copy to your source
tree, cleanup, and checkin.
The math test documentation in math/README.libm-test is updated
document the new Makefile target.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
* Makefile.in (regen-ulps): New target.
* math/Makefile [ifneq (no,$(PERL)]: Declare regen-ulps with .PHONY.
[ifneq (no,$(PERL)] (run-regen-ulps): New variable.
[ifneq (no,$(PERL)] (regen-ulps): New target.
[ifeq (no,$(PERL)] (regen-ulps): New target.
* math/libm-test.inc (ulps_file_name): Define.
(output_dir): New variable.
(options): Add "output-dir" option.
(parse_opt): Handle 'o' case.
(main): If output_dir is non-NULL use it as a prefix
otherwise use "".
* math/README.libm-test: Update `How can I generate "libm-test-ulps"?'
The patch increase the high value to check if expl overflows. Current
high mark value is not really correct, the algorithm accepts high values.
It also adds a correct wrapper function to check for overflow and underflow.
* math/Makefile: Recognize gmp-sysdep_routines.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add VIS3 optimized GMP routines
to sysdeps.
* sysdeps/sparc/sparc64/multiarch/add_n-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/add_n.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: New file.
With help from Joseph Myers.
* sysdeps/ieee754/ldbl-128/s_atanl.c (__atanl): Handle tiny and
very large arguments properly.
* math/libm-test.inc (atan_test): New tests.
(atan2_test): New tests.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
With help from Joseph Myers.
* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Adjust tinyness
cutoff to 2**-13.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Adjust tinyness
cutoff to 2**-25.
* sysdeps/ieee754/ldbl-128/e_j0l.c (U0): New constant.
( __ieee754_y0l): Avoid arithmetic underflow when 'x' is very
small.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
* math/libm-test.inc (y0_test): New tests.
(y1_test): New tests.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/Makefile (sysdep_routines):
Add s_sinf-sse2, s_conf-sse2.
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S: New file.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S: New file.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: New file.
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: New file.
* sysdeps/ieee754/flt-32/s_sinf.c (SINF, SINF_FUNC): Add macros
for using routine as __sinf_ia32.
Use macro for function declaration and weak_alias.
* sysdeps/ieee754/flt-32/s_cosf.c (COSF, COSF_FUNC): Add macros
for using routine as __cosf_ia32.
Use macro for function declaration and weak_alias.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: Fix Copyright.
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Fix Copyright.
* sysdeps/x86_64/fpu/s_sinf.S: New file.
* sysdeps/x86_64/fpu/s_cosf.S: New file.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* math/libm-test.inc (cos_test): Add more test cases.
(sin_test): Likewise.
(sincos_test): Likewise.
For some tests, just claim that fetestexcept() always returns true,
so the rest of the test can be compiled.
For libm-test, provide known bogus values for unsupported rounding
modes, so fesetround() will return failure.
Elsewhere, just add some #ifdefs to avoid code that uses particular
FP exceptions if the exceptions aren't supported.
POSIX 2008 states that if the input for 'logb[f|l]' is a subnormal number
it should be treated as if it were normalized. This means the
implementation should calculate the log2 of the mantissa and add it to the
subnormal exponent (-126 for float and -1022 for double and IBM long
double). This patch takes care of that.
[BZ #6794]
Following Joseph comments about bug 6794, here is a proposed fix. It turned out
to be a large fix mainly because I had to move some file along to follow libm
files/names conventions.
Basically I have added wrappers (w_ilogb.c, w_ilogbf.c, w_ilogbl.c) that now calls
the symbol '__ieee754_ilogb'. The wrappers checks for '__ieee754_ilogb' output and
set the errno and raise exceptions as expected.
The '__ieee754_ilogb' is implemented in sysdeps. I have moved the 's_ilogb[f|l]' files
to e_ilogb[f|l] and renamed the '__ilogb[f|l]' to '__ieee754_ilogb[f|l]'.
I also found out a bug in i386 and x86-64 assembly coded ilogb implementation where
it raises a FE_DIVBYZERO when argument is '0.0'. I corrected this issue as well.
Finally I added the errno and FE_INVALID tests for 0.0, NaN and +-InF argument. Tested
on i386, x86-64, ppc32 and ppc64.
On 64-bit machines we should not split doubles into two 32 bit
integer and handle the words separately. We have wide registers.
This patch implements a 64-bit ceil version. Ideally all other
functions will be converted over time.
__fe_nomask_env.
* sysdeps/powerpc/fpu/fe_nomask.c: Add libm_hidden_def.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_nomask.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_nomask.c: Likewise.
* sysdeps/powerpc/bits/fenv.h: Make safe for C++.
* sysdeps/unix/sysv/linux/powerpc/bits/mathinline.h: New file.
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Rename
function from fegetexcept and make old name weak alias.
* include/fenv.h: Declare __fegetexcept.
* sysdeps/powerpc/fpu/fedisblxcpt.c: Use __fegetexcept instead of
fegetexcept.
* sysdeps/powerpc/fpu/feenablxcpt.c: Likewise.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Avoid call
to fetestexcept.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Use __frexpl
instead of frexpl to avoid local PLT.
* math/s_significandl.c (__significandl): Use __ilogbl instead of
ilogbl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Use __ldexpl
instead of ldexpl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c (__ieee754_expl): Use
__roundl not roundl to avoid local PLT.
* sysdeps/ieee754/ldbl-128/e_j0l.c: Use function names which avoid
local PLTs. Use __sincosl instead of separate sinl and cosl
calls.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S (__lround): Fixed erroneous
result when x is +/-nextafter(+/-0.5,-/+1) i.e. all 1's in the
mantissa.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S (__llround):
Likewise. Also account for when x is an odd number between 2^52
and 2^53-1.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf): Likewise.
* math/libm-test.inc (lround_test, llround_test): Added test cases to
detect aforementioned erroneous conditions.
* sysdeps/ieee754/dbl-64/e_lgamma_r.c: Fix *signgamp for -0.0.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c: Likewise.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c: Likewise.
* math/libm-test.inc: Add test for this case.
Half the patch by Christian Iseli <christian.iseli@licr.org>.
* misc/bits/syslog.h (syslog): When __va_arg_pack is defined,
implement as __extern_always_inline function.
(vsyslog): Define as __extern_always_inline function unconditionally.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf):
When __va_arg_pack is defined, implement as __extern_always_inline
functions.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions unconditionally.
* libio/bits/stdio.h (vprintf): Ifdef out the inline when
bits/stdio2.h will be included.
* wcsmbs/bits/wchar2.h (__swprintf_alias): New redirect.
(swprintf, wprintf, fwprintf): When __va_arg_pack is defined,
implement as __extern_always_inline functions.
(vswprintf, vwprintf, vfwprintf): Define as
__extern_always_inline functions unconditionally.
* debug/tst-chk1.c (do_test): Enable remaining tests for C++.
2007-09-03 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__extern_inline, __extern_always_inline): Only
define in C++ for GCC 4.3+, in C++ always use __gnu_inline__
attribute.
* include/features.h (__USE_EXTERN_INLINES): Define only when
__extern_inline is defined.
* stdlib/stdlib.h: Include bits/stdlib.h when __extern_always_inline
is defined instead of when not __cplusplus.
* misc/sys/syslog.h: Include bits/syslog.h when __extern_always_inline
is defined instead of when not __cplusplus.
* socket/sys/socket.h: Include bits/socket2.h when
__extern_always_inline is defined instead of when not __cplusplus.
* libio/stdio.h: Include bits/stdio2.h when __extern_always_inline
is defined instead of when not __cplusplus.
* posix/unistd.h: Include bits/unistd.h when __extern_always_inline
is defined instead of when not __cplusplus.
* string/string.h: Include bits/string3.h when __extern_always_inline
is defined instead of when not __cplusplus.
* wcsmbs/wchar.h: Include bits/wchar2.h when __extern_always_inline
is defined instead of when not __cplusplus.
(btowc, wctob): Don't guard the inlines with ifndef __cplusplus.
* io/fcntl.h: Don't include bits/fcntl2.h if __extern_always_inline
is not defined.
* misc/bits/syslog-ldbl.h: Guard *_chk stuff with
defined __extern_always_inline instead of !defined __cplusplus.
* libio/bits/stdio-ldbl.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* misc/bits/syslog.h (syslog): Don't define for C++.
(vsyslog): Use __extern_always_inline function for C++ instead of
a macro.
* libio/bits/stdio.h (__STDIO_INLINE): Define to __extern_inline
whenever that macro is defined.
(vprintf): Don't provide the inline for C++.
(fread_unlocked, fwrite_unlocked): Don't define the macros for C++.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf): Don't
define the macros for C++.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions for C++.
* io/sys/stat.h (stat, lstat, fstat, fstatat, mknod, mknodat,
stat64, lstat64, fstat64, fstatat64): Don't define if not
__USE_EXTERN_INLINES.
* wcsmbs/bits/wchar2.h: Fix #error message.
(swprintf, wprintf, fwprintf): Don't define the macros for C++.
(vswprintf, vwprintf, vfwprintf): Define using
__extern_always_inline functions for C++.
* string/bits/string3.h: Don't #undef macros if __cplusplus.
(memcpy, memmove, mempcpy, memset, bcopy, bzero, strcpy, stpcpy,
strncpy, strcat, strncat): Define as __extern_always_inline
functions instead of macros for C++.
* math/bits/cmathcalls.h: Guard __extern_inline routines with
defined __extern_inline.
* sysdeps/alpha/fpu/bits/mathinline.h (__MATH_INLINE): Define
to __extern_inline whenever that macro is defined.
* sysdeps/ia64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/i486/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/powerpc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/x86_64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/unix/sysv/linux/sys/sysmacros.h (gnu_dev_major,
gnu_dev_minor, gnu_dev_makedev): Remove __extern_inline from
prototypes. Only provide __extern_inline routines if
__USE_EXTERN_INLINES.
* debug/Makefile: Add rules to build and run tst-{,lfs}chk{4,5,6}
tests.
* debug/tst-chk1.c (do_prepare, do_test): Allow compilation as C++.
For now avoid some *printf tests in C++. Skip all testing
if __USE_FORTIFY_LEVEL is defined, but __extern_always_inline macro
is not.
* debug/tst-chk4.cc: New file.
* debug/tst-chk5.cc: New file.
* debug/tst-chk6.cc: New file.
* debug/tst-lfschk4.cc: New file.
* debug/tst-lfschk5.cc: New file.
* debug/tst-lfschk6.cc: New file.
* include/wchar.h (__vfwprintf_chk, __vswprintf_chk): Avoid
prototypes in C++.
* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
__vfprintf_chk, __fgets_unlocked_chk, __fgets_chk): Likewise.
(PRINT_FPHEX_LONG_DOUBLE): Fix printing numbers where lower double
is non-zero, but smaller than 2 * __DBL_MIN__.
* stdio-common/tst-sprintf2.c: New test.
* stdio-common/Makefile (tests): Add tst-sprintf2.
* math/test-misc.c (main): Don't run last batch of tests with
IBM long double format.
with setting the sticky bit.
* math/test-misc.c (main): Add more truncation tests.
* soft-fp/floatunsidf.c (__floatunsidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatundidf.c (__floatundidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/extended.h (FP_UNPACK_RAW_E): Do not increase X##_e for
denormal operands. Do not generate FP_EX_DENORM exception.
(FP_UNPACK_RAW_EP): Ditto.
(FP_UNPACK_SEMIRAW_E): Use FP_UNPACK_RAW_E instead of
undefined _FP_UNPACK_RAW_E.
(FP_UNPACK_SEMIRAW_EP): Use FP_UNPACK_RAW_EP instead of
undefined _FP_UNPACK_RAW_EP.
(FP_PACK_SEMIRAW_E): Use FP_PACK_RAW_E instead of
undefined _FP_PACK_RAW_E.
(FP_PACK_SEMIRAW_EP): Use FP_PACK_RAW_EP instead of
undefined _FP_PACK_RAW_EP.
* op-2.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_2.
* op-4.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_4.
* soft-fp/op-common.h (FP_EXTEND): Do not abort when
_FP_EXPBIAS_##dfs == _FP_EXPBIAS_##sfs. Handle denormals for
this case.
* soft-fp/op-common.h (FP_TRUNC): Ditto.
* soft-fp/op-common.h (FP_TRUNC): Replace raising of FP_EX_INEXACT
with setting the sticky bit.
* math/test-misc.c (main): Add more truncation tests.
2007-04-14 Uros Bizjak <ubizjak@gmail.com>
* soft-fp/floatunsidf.c (__floatunsidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatundidf.c (__floatundidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/extended.h (FP_UNPACK_RAW_E): Do not increase X##_e for
denormal operands. Do not generate FP_EX_DENORM exception.
(FP_UNPACK_RAW_EP): Ditto.
(FP_UNPACK_SEMIRAW_E): Use FP_UNPACK_RAW_E instead of
undefined _FP_UNPACK_RAW_E.
(FP_UNPACK_SEMIRAW_EP): Use FP_UNPACK_RAW_EP instead of
undefined _FP_UNPACK_RAW_EP.
(FP_PACK_SEMIRAW_E): Use FP_PACK_RAW_E instead of
undefined _FP_PACK_RAW_E.
(FP_PACK_SEMIRAW_EP): Use FP_PACK_RAW_EP instead of
undefined _FP_PACK_RAW_EP.
* op-2.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_2.
* op-4.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_4.
2007-04-16 Uros Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
* soft-fp/op-common.h (FP_EXTEND): Do not abort when
_FP_EXPBIAS_##dfs == _FP_EXPBIAS_##sfs. Handle denormals for
this case.
* soft-fp/op-common.h (FP_TRUNC): Ditto.
2007-05-03 Jakub Jelinek <jakub@redhat.com>
values close to smallest double denormalized value to double.
* soft-fp/op-common.h (FP_TRUNC): Correct off-by-one error in
condition for truncating to 0. Set sticky bit for such
truncation.
2007-05-03 Jakub Jelinek <jakub@redhat.com>
* math/test-misc.c (main): Add tests for rounding long double
values close to smallest double denormalized value to double.
2007-04-30 Joseph Myers <joseph@codesourcery.com>
* soft-fp/op-common.h (FP_TRUNC): Correct off-by-one error in
condition for truncating to 0. Set sticky bit for such
truncation.
2007-03-27 Jakub Jelinek <jakub@redhat.com>
[BZ #3306]
* math/math_private.h (math_opt_barrier, math_force_eval): Define.
* sysdeps/i386/fpu/math_private.h: New file.
* sysdeps/x86_64/fpu/math_private.h: New file.
* math/s_nexttowardf.c (__nexttowardf): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m".
* math/s_nextafter.c (__nextafter): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Use
math_opt_barrier and math_force_eval macros.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/i386/fpu/s_nexttoward.c: Include float.h.
(__nexttoward): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m". Only use asm to force double result if
FLT_EVAL_METHOD is 2.
* sysdeps/i386/fpu/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m". Only use asm to force double result if
FLT_EVAL_METHOD is not 0.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and
math_force_eval macros. If FLT_EVAL_METHOD is not 0, force
x to float using asm.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include float.h.
(__nldbl_nexttowardf): Use math_opt_barrier and
math_force_eval macros. If FLT_EVAL_METHOD is not 0, force
x to float using asm.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and math_force_eval
macros. If FLT_EVAL_METHOD is not 0, force x to float using asm.
* math/bug-nextafter.c (zero, inf): New variables.
(main): Add new tests.
* math/bug-nexttoward.c (zero, inf): New variables.
(main): Add new tests.
2007-03-22 Jakub Jelinek <jakub@redhat.com>
[BZ #3427]
* sysdeps/x86_64/fpu/feholdexcpt.c (feholdexcept): Clear all
exceptions both in SW and MXCSR.
* sysdeps/x86_64/fpu/feupdateenv.c: New file.
* sysdeps/x86_64/fpu/feenablxcpt.c (feenableexcept): Remove dead code.
* sysdeps/x86_64/fpu/fedisblxcpt.c (fedisableexcept): Likewise.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Clear all exceptions
in MXCSR if SSE is available.
* sysdeps/i386/fpu/feupdateenv.c: Include unistd.h, dl-procinfo.h
and ldsodefs.h.
(__feupdateenv): Query exceptions also from MXCSR if SSE is available.
Fix comment typo.
* sysdeps/ia64/fpu/feholdexcpt.c (feholdexcept): Clear all exceptions.
Return 0 rather than 1.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Fix comment typo.
Remove incorrect part of a comment. Fix argument to feraiseexcept.
* math/test-fenv.c (feholdexcept_tests): New function.
(main): Call it.
2007-01-05 Richard B. Kreckel <kreckel@ginac.de>
[BZ #3427]
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Clear all exceptions
in SW.
2007-03-01 Jakub Jelinek <jakub@redhat.com>
[BZ #4096]
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Check for NaN
earlier.
* math/libm-test.inc (pow_test): Add more tests involving NaNs.
* sysdeps/i386/fpu/e_powf.S (__ieee754_powf): Avoid invalid exception
for x qNaN and y either +-inf or non-integer value.
* sysdeps/i386/fpu/e_pow.S (__ieee754_pow): Likewise.
* sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Likewise.
* sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Likewise.
* soft-fp/op-common.h (FP_TRUNC): When truncating a NaN, clear
workbits in semi-raw fraction.
* math/test-misc.c: Add new tests.
* math/basic-test.c: Include test-skeleton.c.
(TEST_TRUNC): Define.
(truncdfsf_test, trunctfsf_test, trunctfdf_test): New.
(main): Rename to ...
(do_test): ...this. Run new tests.
(TEST_FUNCTION): Define.
[BZ #2749]
* soft-fp/op-4.h (__FP_FRAC_SUB_3, __FP_FRAC_SUB_4): Correct borrow
handling for high words.
* soft-fp/op-common.h (_FP_OVERFLOW_SEMIRAW): Always set inexact
and overflow for infinity.
2007-01-15 Jakub Jelinek <jakub@redhat.com>
* soft-fp/op-common.h (FP_TRUNC): When truncating a NaN, clear
workbits in semi-raw fraction.
* math/test-misc.c: Add new tests.
2007-01-14 Steven Munroe <sjmunroe@us.ibm.com>
* math/basic-test.c: Include test-skeleton.c.
(TEST_TRUNC): Define.
(truncdfsf_test, trunctfsf_test, trunctfdf_test): New.
(main): Rename to ...
(do_test): ...this. Run new tests.
(TEST_FUNCTION): Define.
2006-10-05 Steven Munroe <sjmunroe@us.ibm.com>
Joe Kerian <jkerian@us.us.ibm.com>
[BZ #2749]
* soft-fp/op-4.h (__FP_FRAC_SUB_3, __FP_FRAC_SUB_4): Correct borrow
handling for high words.
* soft-fp/op-common.h (_FP_OVERFLOW_SEMIRAW): Always set inexact
and overflow for infinity.
2006-06-17 Joseph S. Myers <joseph@codesourcery.com>
[BZ #2592]
* math/libm-test.inc (lrint_test_tonearest): New function.
(lrint_test_towardzero): New function.
(lrint_test_downward): New function.
(lrint_test_upward): New function.
(main): Run these new tests.
* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Correct rounding
of values near to 0.
(two52): Use double not long double.
* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
(two23): Use float not double.
* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
(two23): Use float not double.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
2006-06-08 Joseph Myers <jsm28@gcc.gnu.org>
[BZ #2832]
* math/gen-libm-test.pl (clean_up_number): Do not remove trailing
0s from integers.
2006-08-13 Ulrich Drepper <drepper@redhat.com>
[BZ #2987]
* sysdeps/unix/sysv/linux/clock_settime.c: Add code to use syscall
for CPU clocks.
* sysdeps/unix/clock_settime.c: Add support for platform-specific
setting of CPU clocks.
2006-05-14 Andreas Schwab <schwab@suse.de>
* math/complex.h [__LDBL_COMPAT]: Use __REDIRECT_NTH.
2006-05-12 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sched_getaffinity.c: Include sys/param.h.
(__sched_getaffinity_new): Don't crash if cpusetsize is smaller than
sizeof (cpu_set_t).
* math/gen-libm-test.pl (parse_args): Take function name for pretty
output as an argument.
(generate_testfile): Pass it the name given in the START macro.
[BZ #2466]
* math/libm-test.inc (llrint_test, llround_test): Fix last change to
protect large-precision cases with [LDBL_MANT_DIG > 100].
(llrint_test_tonearest, llrint_test_towardzero): Likewise.
(llrint_test_downward, llrint_test_upward): Likewise.
2006-03-15 Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
[BZ #2466]
* math/libm-test.inc (llrint_test, llround_test) [TEST_LDOUBLE]:
Add new test values.
(llrint_test_tonearest, llrint_test_towardzero, llrint_test_downward,
llrint_test_upward): New functions.
(main): Call them.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c (__llrintl): Handle
rounding that spans doubles in IBM long double format.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c (__llroundl): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: Removed.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: Removed.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: Removed.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: Removed.
2006-03-16 Roland McGrath <roland@redhat.com>
($(all-subdirs-targets)): Use it in place of -C option.
* Rules: Use $(..) instead of ../ if it's already defined.
* Makeconfig (subdir-srcdirs): New variable.
* csu/Makefile (all-Banner-files): Use it.
* configure.in (--enable-add-ons): Set to "yes" by default.
Handle absolute add-on directory names when looking for configure
fragments. Also look for sysdeps/*/preconfigure fragments in add-ons.
Require add-on configure to set $libc_add_on_canonical, use
that in $add_ons_sfx. Substitute add_on_subdirs with computed list
of subdir names each add-on configure set in libc_add_on_subdirs.
* configure: Regenerated.
* Makefile (%/preconfigure: %/preconfigure.in): New pattern rule.
* config.make.in (add-on-subdirs): New substituted variable.
* Makeconfig (all-subdirs): Include $(add-on-subdirs).
Remove $(add-ons), $(sysdep-subdirs).
Don't filter out $(sysdep-inhibit-subdirs).
($(common-objpfx)sysd-dirs): Target removed. Don't include it.
($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs
files together to gen-sorted.awk, and $(subdirs) via -v.
(subdirs): Remove magic reordering for mach and hurd.
* scripts/gen-sorted.awk: Use subdirs from command line.
Process Subdirs and Depend files directly.
Let Subdirs files use "first dir" and "inhibit dir".
Always move elf to the end of the list.
* hurd/Depend: New file.
* sysdeps/mach/Subdirs: Use "first mach".
* Makefile (dist-separate): Remove linuxthreads.
(dist-separate-linuxthreads): Variable removed.
(glibc-%.tar rule): Use $(sysdeps-add-ons).
* Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs),
not $(all-subdirs).
(sysdep-makefiles): Use $(sysdirs).
(sysdirs): Remove export.
($(+sysdir_pfx)sysd-rules): Handle absolute directory names in
$(config-sysdirs).
(+sysdir_pfx): Variable removed.
(sysd-rules): Use $(common-objpfx) in place of it.
(sysdirs): Variable moved to ...
* Makeconfig (sysdirs): ... here.
Handle absolute directory names in $(config-sysdirs).
(full_config_sysdirs): Variable removed.
* csu/Makefile: Use $(sysdirs) in vpath directive.
* math/Makefile (ulps-file): Use $(sysdirs).
* sysdeps/gnu/Makefile (errlist-c): Likewise.
($(objpfx)errlist-compat.c): Likewise.
* Makeconfig (all-Subdirs-files): Likewise.
($(common-objpfx)config.status): Likewise.
* configure.in (sysnames): Handle absolute add-on directory names.
(sysdeps_add_ons): New variable, AC_SUBST it.
Compute which add-ons contributed sysdeps directories.
* configure: Regenerated.
* config.make.in (sysdeps-add-ons): New substituted variable.
* Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ...
* Makeconfig: ... to here.
(+sysdep_dirs): Append $(sysdeps-add-ons) here.
(+includes): Remove $(objpfx) include, already in $(+sysdep_dirs).
Remove $(includes).
(sysdep-makeconfigs): Use $(+sysdep_dirs).
($(common-objpfx)shlib-versions.v.i): Likewise.
* Makeconfig: Remove hair to set Makeconfig-add-on.
* sysdeps/unix/Makefile (sysdirs): Remove export.
(asm_CPP): Variable removed.
($(common-objpfx)sysd-syscalls): Pass them directly for the script.
* sysdeps/posix/Makefile: New file.
* Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix
values here with ?=.
* stdlib/gen-mpn-copy: File removed.
* stdlib/Makefile (distribute): Remove it.
* configure.in: Don't grok --with-gmp.
* configure: Regenerated.
* configure.in (libc_cv_idn): Don't check it; libidn/configure does it.
* configure: Regenerated.
* bare: Directory removed, saved in ports repository.
Joseph Myers
Carlos O'Donell
Siddhesh Poyarekar
Thomas Schwinge
Adhemerval Zanella
David S. Miller
Andreas Schwab
Andreas Schwab
Mike Frysinger
Marcus Shawcroft
Markus Trippelsdorf
Liubov Dmitrieva
Marek Polacek
Chris Metcalf
Roland McGrath
Andreas Jaeger
Ryan S. Arnold
Richard Henderson
Ulrich Drepper
Aurelien Jarno
Paul Eggert
Richard B. Kreckel
Marek Polacek
Andreas Schwab
Petr Baudis
Paul Pluzhnikov
H.J. Lu
Erich Ritz
Jakub Jelinek
Ulrich Drepper
Jim Meyering
Roland McGrath