Not all architectures define this value, and if they don't,
just let the test run the same as test-fpucw, with __fpu_control
set to _FPU_DEFAULT explicitly.
http://sourceware.org/ml/libc-alpha/2013-08/msg00084.html
Another batch of ieee854 macros and union replacement. These four
files also have bugs fixed with this patch. The fact that the two
doubles in an IBM long double may have different signs means that
negation and absolute value operations can't just twiddle one sign bit
as you can with ieee864 style extended double. fmodl, remainderl,
erfl and erfcl all had errors of this type. erfl also returned +1 for
large magnitude negative input where it should return -1. The hypotl
error is innocuous since the value adjusted twice is only used as a
flag. The e_hypotl.c tests for large "a" and small "b" are mutually
exclusive because we've already exited when x/y > 2**120. That allows
some further small simplifications.
[BZ #15734], [BZ #15735]
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Rewrite
all uses of ieee875 long double macros and unions. Simplify test
for 0.0L. Correct |x|<|y| and |x|=|y| test. Use
ldbl_extract_mantissa value for ix,iy exponents. Properly
normalize after ldbl_extract_mantissa, and don't add hidden bit
already handled. Don't treat low word of ieee854 mantissa like
low word of IBM long double and mask off bit when testing for
zero.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Rewrite
all uses of ieee875 long double macros and unions. Simplify tests
for 0.0L and inf. Correct double adjustment of k. Delete dead code
adjusting ha,hb. Simplify code setting kld. Delete two600 and
two1022, instead use their values. Recognise that tests for large
"a" and small "b" are mutually exclusive. Rename vars. Comment.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl):
Rewrite all uses of ieee875 long double macros and unions. Simplify
test for 0.0L and nan. Correct negation.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c (__erfl): Rewrite all uses of
ieee875 long double macros and unions. Correct output for large
magnitude x. Correct absolute value calculation.
(__erfcl): Likewise.
* math/libm-test.inc: Add tests for errors discovered in IBM long
double versions of fmodl, remainderl, erfl and erfcl.
http://sourceware.org/ml/libc-alpha/2013-08/msg00081.html
This is the first of a series of patches to ban ieee854_long_double
and the ieee854_long_double macros when using IBM long double. union
ieee854_long_double just isn't correct for IBM long double, especially
when little-endian, and pretending it is OK has allowed a number of
bugs to remain undetected in sysdeps/ieee754/ldbl-128ibm/.
This changes the few places in generic code that use it.
* stdio-common/printf_size.c (__printf_size): Don't use
union ieee854_long_double in fpnum union.
* stdio-common/printf_fphex.c (__printf_fphex): Likewise. Use
signbit macro to retrieve sign from long double.
* stdio-common/printf_fp.c (___printf_fp): Use signbit macro to
retrieve sign from long double.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: Adjust for fpnum change.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Likewise.
* sysdeps/ieee754/ldbl-96/printf_fphex.c: Likewise.
* sysdeps/x86_64/fpu/printf_fphex.c: Likewise.
* math/test-misc.c (main): Don't use union ieee854_long_double.
ports/
* sysdeps/ia64/fpu/printf_fphex.c: Adjust for fpnum change.
Long ago static startup did not parse the auxiliary vector and therefore
could not get at any `AT_FPUCW' tag to check whether upon FPU context
allocation the kernel would use a FPU control word setting different to
that provided by the `__fpu_control' variable. Static startup therefore
always initialized the FPU control word, forcing immediate FPU context
allocation even for binaries that otherwise never used the FPU.
As from GIT commit f8f900ecb9 static
startup supports parsing the auxiliary vector, so now it can avoid
explicit initialization of the FPU control word, just as can dynamic
startup, in the usual case where the setting written to the FPU control
word would be the same as the kernel uses. This defers FPU context
allocation until the binary itself actually pokes at the FPU.
Note that the `AT_FPUCW' tag is usually absent from the auxiliary vector
in which case _FPU_DEFAULT is assumed to be the kernel default.
These have helped me find and fix type conversion issues in QEMU's MIPS
hardware emulation. While certainly glibc is not the best place for such
tests, they're just an enhancement of tests already present.
In 128-bit IBM long double the precision of the type
decreases as you approach subnormal numbers, equaling
that of a double for subnormal numbers. Therefore
adjust the computation in ulp to use 2^(MIN_EXP - MANT_DIG)
which is correct for FP_SUBNORMAL for all types.
The current value used for ulp near zero is wrong,
and this commit fixes it such that ulp(0) is the smallest
subnormal value nearest to zero, which makes the most
sense for testing values near zero. Note that this is not
what Java does; they use the nearest normal value, which
is less accurate than what we want for glibc. Note that
there is no correct implementation of ulp since there
is no strict mathmatical definition that is accepted by
all groups using IEEE 754.
Previously with the large ulp values near zero there
were tests that previously passed, but were in fact
billions of ulp away from the precise answer. With this
commit we now need to disable one of the cpow tests which
is revealed to be inaccurate (bug 14473).
---
2013-05-24 Carlos O'Donell <carlos@redhat.com>
* math/libm-test.inc (MAX_EXP): Define.
(ULPDIFF): Define.
(ulp): New function.
(check_float_internal): Use ULPDIFF.
(cpow_test): Disable failing test.
(check_ulp): Test ulp() implemetnation.
(main): Call check_ulp before starting tests.
Use the most accurate hex literals possible for the answers to the
cos and sincos tests that vary according to the error in the rounding
of PI/2.
---
2013-04-24 Carlos O'Donell <carlos@redhat.com>
* math/libm-test.inc (cos_test): Use accurate hex constants.
(sincost_test): Likewise.
The value of PI is never exactly PI in any floating point representation,
and the value of PI/2 is never PI/2. It is wrong to expect cos(M_PI_2l)
to return 0, instead it will return an answer that is non-zero because
M_PI_2l doesn't round to exactly PI/2 in the type used.
That is to say that the correct answer is to do the following:
* Take PI or PI/2.
* Round to the floating point representation.
* Take the rounded value and compute an infinite precision cos or sin.
* Use the rounded result of the infinite precision cos or sin as the
answer to the test.
I used printf to do the type rounding, and Wolfram's Alpha to do the
infinite precision cos calculations.
The following changes bring x86-64 and x86 to 1/2 ulp for two tests.
It shows that the x86 cos implementation is quite good, and that
our test are flawed.
Unfortunately given that the rounding errors are type dependent we
need to fix this for each type. No regressions on x86-64 or x86.
---
2013-04-11 Carlos O'Donell <carlos@redhat.com>
* math/libm-test.inc (cos_test): Fix PI/2 test.
(sincos_test): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerate.
* sysdeps/i386/fpu/libm-test-ulps: Regenerate.
run-via-rtld-prefix checks whether the program to be run is a static
test and skips if it is. This is fine, except that it assumes that
the program to be run is the second $^, which is true only for tests.
This change creates an rtld-prefix, which is simply the dynamic linker
prefix with the necessary arguments and uses that in the non-test
targets.
Document the use of the convenience testrun.sh script for
running the libm test.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
* math/README.libm-test (How can I generate "libm-test-ulps"?):
Use testrun.sh to run libm tests.
The wiki "Regeneration" page has this to say about update ULPs.
"The libm-test-ulps files are semiautomatically updated. To
update an ulps baseline, run each of the failing tests (test-float,
test-double, etc.) with -u; this will generate a file called ULPs;
concatenate each of those files with the existing libm-test-ulps
file, after removing any entries for particularly huge numbers of
ulps that you do not want to mark as expected. Then run
gen-libm-test.pl -n -u FILE where FILE is the concatenated file
produced in the previous step. This generates a file called
NewUlps which is the new sorted version of libm-test-ulps."
The same information is listed in math/README.libm-test, and is a
lot of manual work that you often want to run over-and-over again
while working on a particular test.
The `regen-ulps' convenience target does this automatically for
developers.
We strictly assume the source tree is readonly and add a
new --output-dir option to libm-test.inc to allow for writing
out ULPs to $(objpfx).
When run the new target does the following:
* Starts with the baseline ULPs file.
* Runs each of the libm math tests with -u.
* Adds new changes seen with -u to the baseline.
* Sorts and prepares the test output with gen-libm-test.pl.
* Leaves math/NewUlps in your build tree to copy to your source
tree, cleanup, and checkin.
The math test documentation in math/README.libm-test is updated
document the new Makefile target.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
* Makefile.in (regen-ulps): New target.
* math/Makefile [ifneq (no,$(PERL)]: Declare regen-ulps with .PHONY.
[ifneq (no,$(PERL)] (run-regen-ulps): New variable.
[ifneq (no,$(PERL)] (regen-ulps): New target.
[ifeq (no,$(PERL)] (regen-ulps): New target.
* math/libm-test.inc (ulps_file_name): Define.
(output_dir): New variable.
(options): Add "output-dir" option.
(parse_opt): Handle 'o' case.
(main): If output_dir is non-NULL use it as a prefix
otherwise use "".
* math/README.libm-test: Update `How can I generate "libm-test-ulps"?'
The patch increase the high value to check if expl overflows. Current
high mark value is not really correct, the algorithm accepts high values.
It also adds a correct wrapper function to check for overflow and underflow.
* math/Makefile: Recognize gmp-sysdep_routines.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add VIS3 optimized GMP routines
to sysdeps.
* sysdeps/sparc/sparc64/multiarch/add_n-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/add_n.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: New file.
With help from Joseph Myers.
* sysdeps/ieee754/ldbl-128/s_atanl.c (__atanl): Handle tiny and
very large arguments properly.
* math/libm-test.inc (atan_test): New tests.
(atan2_test): New tests.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
With help from Joseph Myers.
* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Adjust tinyness
cutoff to 2**-13.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Adjust tinyness
cutoff to 2**-25.
* sysdeps/ieee754/ldbl-128/e_j0l.c (U0): New constant.
( __ieee754_y0l): Avoid arithmetic underflow when 'x' is very
small.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
* math/libm-test.inc (y0_test): New tests.
(y1_test): New tests.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/Makefile (sysdep_routines):
Add s_sinf-sse2, s_conf-sse2.
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S: New file.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S: New file.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: New file.
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: New file.
* sysdeps/ieee754/flt-32/s_sinf.c (SINF, SINF_FUNC): Add macros
for using routine as __sinf_ia32.
Use macro for function declaration and weak_alias.
* sysdeps/ieee754/flt-32/s_cosf.c (COSF, COSF_FUNC): Add macros
for using routine as __cosf_ia32.
Use macro for function declaration and weak_alias.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: Fix Copyright.
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Fix Copyright.
* sysdeps/x86_64/fpu/s_sinf.S: New file.
* sysdeps/x86_64/fpu/s_cosf.S: New file.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* math/libm-test.inc (cos_test): Add more test cases.
(sin_test): Likewise.
(sincos_test): Likewise.
For some tests, just claim that fetestexcept() always returns true,
so the rest of the test can be compiled.
For libm-test, provide known bogus values for unsupported rounding
modes, so fesetround() will return failure.
Elsewhere, just add some #ifdefs to avoid code that uses particular
FP exceptions if the exceptions aren't supported.
POSIX 2008 states that if the input for 'logb[f|l]' is a subnormal number
it should be treated as if it were normalized. This means the
implementation should calculate the log2 of the mantissa and add it to the
subnormal exponent (-126 for float and -1022 for double and IBM long
double). This patch takes care of that.
[BZ #6794]
Following Joseph comments about bug 6794, here is a proposed fix. It turned out
to be a large fix mainly because I had to move some file along to follow libm
files/names conventions.
Basically I have added wrappers (w_ilogb.c, w_ilogbf.c, w_ilogbl.c) that now calls
the symbol '__ieee754_ilogb'. The wrappers checks for '__ieee754_ilogb' output and
set the errno and raise exceptions as expected.
The '__ieee754_ilogb' is implemented in sysdeps. I have moved the 's_ilogb[f|l]' files
to e_ilogb[f|l] and renamed the '__ilogb[f|l]' to '__ieee754_ilogb[f|l]'.
I also found out a bug in i386 and x86-64 assembly coded ilogb implementation where
it raises a FE_DIVBYZERO when argument is '0.0'. I corrected this issue as well.
Finally I added the errno and FE_INVALID tests for 0.0, NaN and +-InF argument. Tested
on i386, x86-64, ppc32 and ppc64.
Joseph Myers
Chris Metcalf
Alan Modra
Siddhesh Poyarekar
Maciej W. Rozycki
Thomas Schwinge
Andreas Schwab
David S. Miller
Carlos O'Donell
Richard Henderson
Peter Collingbourne
Adhemerval Zanella
Andreas Schwab
Mike Frysinger
Marcus Shawcroft
Markus Trippelsdorf
Liubov Dmitrieva
Marek Polacek
Roland McGrath
Andreas Jaeger
Ryan S. Arnold