Do not relocate absolute symbols by the base address. Such symbols have
SHN_ABS as the section index and their value is not supposed to be
affected by relocation as per the ELF gABI[1]:
"SHN_ABS
The symbol has an absolute value that will not change because of
relocation."
The reason for our non-conformance here seems to be an old SysV linker
bug causing symbols like _DYNAMIC to be incorrectly emitted as absolute
symbols[2]. However in a previous discussion it was pointed that this
is seriously flawed by preventing the lone purpose of the existence of
absolute symbols from being used[3]:
"On the contrary, the only interpretation that makes sense to me is that
it will not change because of relocation at link time or at load time.
Absolute symbols, from the days of the earliest linking loaders, have
been used to represent addresses that are outside the address space of
the module (e.g., memory-mapped addresses or kernel gateway pages).
They've even been used to represent true symbolic constants (e.g.,
system entry point numbers, sizes, version numbers). There's no other
way to represent a true absolute symbol, while the meaning you seek is
easily represented by giving the symbol a non-negative st_shndx value."
and we ought to stop supporting our current broken interpretation.
Update processing for dladdr(3) and dladdr1(3) so that SHN_ABS symbols
are ignored, because under the corrected interpretation they do not
represent addresses within a mapped file and therefore are not supposed
to be considered.
References:
[1] "System V Application Binary Interface - DRAFT - 19 October 2010",
The SCO Group, Section "Symbol Table",
<http://www.sco.com/developers/gabi/2012-12-31/ch4.symtab.html>
[2] Alan Modra, "Absolute symbols"
<https://sourceware.org/ml/binutils/2012-05/msg00019.html>
[3] Cary Coutant, "Re: Absolute symbols"
<https://sourceware.org/ml/binutils/2012-05/msg00020.html>
[BZ #19818]
* sysdeps/generic/ldsodefs.h (SYMBOL_ADDRESS): Handle SHN_ABS
symbols.
* elf/dl-addr.c (determine_info): Ignore SHN_ABS symbols.
* elf/tst-absolute-sym.c: New file.
* elf/tst-absolute-sym-lib.c: New file.
* elf/tst-absolute-sym-lib.lds: New file.
* elf/Makefile (tests): Add `tst-absolute-sym'.
(modules-names): Add `tst-absolute-sym-lib'.
(LDLIBS-tst-absolute-sym-lib.so): New variable.
($(objpfx)tst-absolute-sym-lib.so): New dependency.
($(objpfx)tst-absolute-sym): New dependency.
Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Three of the functions defined by internal-signals.h were not actually
fulfilling their contracts when the sysdeps/generic version of that
file was used. Also, the Linux version included several more headers
than the generic version, which is the root cause of a build failure
on Hurd (already addressed in another way, but I think it is proper to
make the headers match).
* sysdeps/generic/internal-signals.h: Include signal.h,
sigsetops.h, and stdbool.h.
(__libc_signal_block_all): Actually block all signals.
(__libc_signal_block_app): Likewise.
(__libc_signal_restore_set): Actually restore the signal mask.
This patch filters out the internal NPTL signals (SIGCANCEL/SIGTIMER and
SIGSETXID) from signal functions. GLIBC on Linux requires both signals to
proper implement pthread cancellation, posix timers, and set*id posix
thread synchronization.
And not filtering out the internal signal is troublesome:
- A conformant program on a architecture that does not filter out the
signals might inadvertently disable pthread asynchronous cancellation,
set*id synchronization or posix timers.
- It might also to security issues if SIGSETXID is masked and set*id
functions are called (some threads might have effective user or group
id different from the rest).
The changes are basically:
- Change __is_internal_signal to bool and used on all signal function
that has a signal number as input. Also for signal function which accepts
signals sets (sigset_t) it assumes that canonical function were used to
add/remove signals which lead to some input simplification.
- Fix tst-sigset.c to avoid check for SIGCANCEL/SIGTIMER and SIGSETXID.
It is rewritten to check each signal indidually and to check realtime
signals using canonical macros.
- Add generic __clear_internal_signals and __is_internal_signal
version since both symbols are used on generic implementations.
- Remove superflous sysdeps/nptl/sigfillset.c.
- Remove superflous SIGTIMER handling on Linux __is_internal_signal
since it is the same of SIGCANCEL.
- Remove dangling define and obvious comment on nptl/sigaction.c.
Checked on x86_64-linux-gnu.
[BZ #22391]
* nptl/sigaction.c (__sigaction): Use __is_internal_signal to
check for internal nptl signals.
* nptl/sigaction.c (__sigaction): Likewise.
* signal/sigaddset.c (sigaddset): Likewise.
* signal/sigdelset.c (sigdelset): Likewise.
* sysdeps/posix/signal.c (__bsd_signal): Likewise.
* sysdeps/posix/sigset.c (sigset): Call and check sigaddset return
value.
* signal/sigfillset.c (sigfillset): User __clear_internal_signals
to filter out internal nptl signals.
* signal/tst-sigset.c (do_test): Check ech signal indidually and
also check realtime signals using standard macros.
* sysdeps/generic/internal-signals.h (__clear_internal_signals,
__is_internal_signal, __libc_signal_block_all,
__libc_signal_block_app, __libc_signal_restore_set): New functions.
* sysdeps/nptl/sigfillset.c: Remove file.
* sysdeps/unix/sysv/linux/internal-signals.h (__is_internal_signal):
Change return to bool.
(__clear_internal_signals): Remove SIGTIMER clean since it is
equal to SIGCANEL on Linux.
* sysdeps/unix/sysv/linux/sigtimedwait.c (__sigtimedwait): Assume
signal set was constructed using standard functions.
Reported-by: Yury Norov <ynorov@caviumnetworks.com>
Refactor the sincos implementation - rather than rely on odd partial inlining
of preprocessed portions from sin and cos, explicitly write out the cases.
This makes sincos much easier to maintain and provides an additional 16-20%
speedup between 0 and 2^27. The overall speedup of sincos is 48% over this range.
Between 0 and PI it is 66% faster.
* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Cleanup ifdefs.
(__cos): Likewise.
* sysdeps/ieee754/dbl-64/s_sin.c (__sincos): Refactor using the same
logic as sin and cos.
Refactor duplicated code into do_sin. Since all calls to do_sin use copysign to
set the sign of the result, move it inside do_sin. Small inputs use a separate
polynomial, so move this into do_sin as well (the check is based on the more
conservative case when doing large range reduction, but could be relaxed).
* sysdeps/ieee754/dbl-64/s_sin.c (do_sin): Use TAYLOR_SIN for small
inputs. Return correct sign.
(do_sincos): Remove small input check before do_sin, let do_sin set
the sign.
(__sin): Likewise.
(__cos): Likewise.
For huge inputs use the improved do_sincos function as well. Now no cases use
the correction factor returned by do_sin, do_cos and TAYLOR_SIN, so remove it.
* sysdeps/ieee754/dbl-64/s_sin.c (TAYLOR_SIN): Remove cor parameter.
(do_cos): Remove corp parameter and calculations.
(do_sin): Likewise.
(do_sincos): Remove cor variable.
(__sin): Use do_sincos for huge inputs.
(__cos): Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise.
(reduce_and_compute_sincos): Remove unused function.
This patch improves the accuracy of the range reduction. When the input is
large (2^27) and very close to a multiple of PI/2, using 110 bits of PI is not
enough. Improve range reduction accuracy to 136 bits. As a result the special
checks for results close to zero can be removed. The ULP of the polynomials is
at worst 0.55ULP, so there is no reason for the slow functions, and they can be
removed.
* sysdeps/ieee754/dbl-64/s_sin.c (reduce_sincos_1): Rename to
reduce_sincos, improve accuracy to 136 bits.
(do_sincos_1): Rename to do_sincos, remove fallbacks to slow functions.
(__sin): Use improved reduction and simplified do_sincos calculation.
(__cos): Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise.
This patch removes the large range reduction code and defers to the huge range
reduction code. The first level range reducer supports inputs up to 2^27,
which is way too large given that inputs for sin/cos are typically small
(< 10), and optimizing for a smaller range would give a significant speedup.
Input values above 2^27 are practically never used, so there is no reason for
supporting range reduction between 2^27 and 2^48. Removing it significantly
simplifies code and enables further speedups. There is about a 2.3x slowdown
in this range due to __branred being extremely slow (a better algorithm could
easily more than double performance).
* sysdeps/ieee754/dbl-64/s_sin.c (reduce_sincos_2): Remove function.
(do_sincos_2): Likewise.
(__sin): Remove middle range reduction case.
(__cos): Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Remove middle range
reduction case.
This series of patches removes the slow patchs from sin, cos and sincos.
Besides greatly simplifying the implementation, the new version is also much
faster for inputs up to PI (41% faster) and for large inputs needing range
reduction (27% faster).
ULP is ~0.55 with no errors found after testing 1.6 billion inputs across most
of the range with mpsin and mpcos. The number of incorrectly rounded results
(ie. ULP >0.5) is at most ~2750 per million inputs between 0.125 and 0.5,
the average is ~850 per million between 0 and PI.
Tested on AArch64 and x86_64 with no regressions.
The first patch removes the slow paths for the cases where the input is small
and doesn't require range reduction. Update ULP tables for sin, cos and sincos
on AArch64 and x86_64.
* sysdeps/aarch64/libm-test-ulps: Update ULP for sin, cos, sincos.
* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Remove slow paths for small
inputs.
(__cos): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sin, cos, sincos.
This patch assumes O_DIRECTORY works as defined by POSIX on opendir
implementation (aligning with other glibc code, for instance pwd). This
allows remove both the fallback code to handle system with missing or
broken O_DIRECTORY along with the Linux specific opendir.c which just
advertise the working flag.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, and
powerpc64le-linux-gnu.
* sysdeps/posix/opendir.c (o_directory_works, tryopen_o_directory):
Remove definitions.
(opendir_oflags): Use O_DIRECTORY regardless.
(__opendir, __opendirat): Remove need_isdir_precheck usage.
* sysdeps/unix/sysv/linux/opendir.c: Remove file.
* htl/cthreads-compat.c (__cthread_detach): Call __pthread_detach
instead of pthread_detach.
(__cthread_fork): Call __pthread_create instead of pthread_create.
(__cthread_keycreate): Call __pthread_key_create instead of
pthread_key_create.
(__cthread_getspecific): Call __pthread_getspecific instead of
pthread_getspecific.
(__cthread_setspecific): Call __pthread_setspecific instead of
pthread_setspecific.
* htl/pt-alloc.c (__pthread_alloc): Call __pthread_mutex_lock and
__pthread_mutex_unlock instead of pthread_mutex_lock and
pthread_mutex_unlock.
* htl/pt-cleanup.c (__pthread_get_cleanup_stack): Rename to
___pthread_get_cleanup_stack.
(__pthread_get_cleanup_stack): New strong alias.
* htl/pt-create.c: Include <pthreadP.h>.
(entry_point): Call __pthread_exit instead of pthread_exit.
(pthread_create): Rename to __pthread_create.
(pthread_create): New strong alias.
* htl/pt-detach.c (pthread_detach): Rename to __pthread_detach.
(pthread_detach): New strong alias.
(__pthread_detach): Call __pthread_cond_broadcast instead of
pthread_cond_broadcast.
* htl/pt-exit.c (__pthread_exit): Call __pthread_setcancelstate
instead of pthread_setcancelstate.
* htl/pt-testcancel.c: Include <pthreadP.h>.
(pthread_testcancel): Call __pthread_exit instead of pthread_exit.
* sysdeps/htl/pt-attr-getstack.c: Include <pthreadP.h>
(__pthread_attr_getstack): Call __pthread_attr_getstackaddr and
__pthread_attr_getstacksize instead of pthread_attr_getstackaddr and
pthread_attr_getstacksize.
* sysdeps/htl/pt-attr-getstackaddr.c (pthread_attr_getstackaddr):
Rename to __pthread_attr_getstackaddr.
(pthread_attr_getstackaddr): New strong alias.
* sysdeps/htl/pt-attr-getstacksize.c (pthread_attr_getstacksize):
Rename to __pthread_attr_getstacksize.
(pthread_attr_getstacksize): New strong alias.
* sysdeps/htl/pt-attr-setstack.c: Include <pthreadP.h>.
(pthread_attr_setstack): Rename to __pthread_attr_setstack.
(pthread_attr_setstack): New strong alias.
(__pthread_attr_setstack): Call __pthread_attr_getstacksize,
__pthread_attr_setstacksize and __pthread_attr_setstackaddr instead of
pthread_attr_getstacksize, pthread_attr_setstacksize and
pthread_attr_setstackaddr.
* sysdeps/htl/pt-attr-setstackaddr.c (pthread_attr_setstackaddr):
Rename to __pthread_attr_setstackaddr.
(pthread_attr_setstackaddr): New strong alias.
* sysdeps/htl/pt-attr-setstacksize.c (pthread_attr_setstacksize):
Rename to __pthread_attr_setstacksize.
(pthread_attr_setstacksize): New strong alias.
* sysdeps/htl/pt-cond-timedwait.c: Include <pthreadP.h>.
(__pthread_cond_timedwait_internal): Use __pthread_exit instead of
pthread_exit.
* sysdeps/htl/pt-key-create.c: Include <pthreadP.h>.
(__pthread_key_create): New hidden def.
* sysdeps/htl/pt-key.h: Include <pthreadP.h>.
* sysdeps/htl/pthreadP.h (_pthread_mutex_init,
__pthread_cond_broadcast, __pthread_create, __pthread_detach,
__pthread_exit, __pthread_key_create, __pthread_getspecific,
__pthread_setspecific, __pthread_setcancelstate,
__pthread_attr_getstackaddr, __pthread_attr_setstackaddr,
__pthread_attr_getstacksize, __pthread_attr_setstacksize,
__pthread_attr_setstack, ___pthread_get_cleanup_stack): New
declarations.
(__pthread_key_create, _pthread_mutex_init): New hidden declarations.
* sysdeps/mach/hurd/htl/pt-attr-setstackaddr.c
(pthread_attr_setstackaddr): Rename to __pthread_attr_setstackaddr.
(pthread_attr_setstackaddr): New strong alias.
* sysdeps/mach/hurd/htl/pt-attr-setstacksize.c
(pthread_attr_setstacksize): Rename to __pthread_attr_setstacksize.
(pthread_attr_setstacksize): New strong alias.
* sysdeps/mach/hurd/htl/pt-docancel.c: Include <pthreadP.h>.
(call_exit): Call __pthread_exit instead of pthread_exit.
* sysdeps/mach/hurd/htl/pt-mutex-init.c: Include <pthreadP.h>.
(_pthread_mutex_init): New hidden definition.
* sysdeps/mach/hurd/htl/pt-sysdep.c: Include <pthreadP.h>.
(_init_routine): Call __pthread_attr_init and __pthread_attr_setstack
instead of pthread_attr_init and pthread_attr_setstack.
Contributed by
Agustina Arzille <avarzille@riseup.net>
Amos Jeffries <squid3@treenet.co.nz>
David Michael <fedora.dm0@gmail.com>
Marco Gerards <marco@gnu.org>
Marcus Brinkmann <marcus@gnu.org>
Neal H. Walfield <neal@gnu.org>
Pino Toscano <toscano.pino@tiscali.it>
Richard Braun <rbraun@sceen.net>
Roland McGrath <roland@gnu.org>
Samuel Thibault <samuel.thibault@ens-lyon.org>
Thomas DiModica <ricinwich@yahoo.com>
Thomas Schwinge <tschwinge@gnu.org>
* htl: New directory.
* sysdeps/htl: New directory.
* sysdeps/hurd/htl: New directory.
* sysdeps/i386/htl: New directory.
* sysdeps/mach/htl: New directory.
* sysdeps/mach/hurd/htl: New directory.
* sysdeps/mach/hurd/i386/htl: New directory.
* nscd/Depend, resolv/Depend, rt/Depend: Add htl dependency.
* sysdeps/mach/hurd/i386/Implies: Add mach/hurd/i386/htl imply.
* sysdeps/mach/hurd/i386/libpthread.abilist: New file.
This patch fixes 3dc214977 for sparc. Different than other architectures
SPARC kernel Kconfig does not define CONFIG_CLONE_BACKWARDS, however it
has the same ABI as if it did, implemented by sparc-specific code
(sparc_do_fork).
It also has a unique return value convention for clone:
Parent --> %o0 == child's pid, %o1 == 0
Child --> %o0 == parent's pid, %o1 == 1
Which required a special macro to correct issue the syscall
(INLINE_CLONE_SYSCALL).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/arch-fork.h [__ASSUME_CLONE_BACKWARDS]
(arch_fork): Issue INLINE_CLONE_SYSCALL if defined.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_CLONE_BACKWARDS): Define.
When there is no login uid Linux sets /proc/self/loginid to the sentinel
value of, (uid_t) -1. If this is set we can return early and avoid
needlessly looking up the sentinel value in any configured nss
databases.
Checked on aarch64-linux-gnu.
* sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid): Return
early when linux sentinel value is set.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux kernel architectures have various arrangements for umount
syscalls. There is a syscall that takes flags, and an older one that
does not. Newer architectures have only the one taking flags, under
the name umount2 (or under the name umount, in the ia64 case). Older
architectures may have both, under the names umount2 and umount (or
under the names umount and oldumount, in the alpha case). glibc then
has several similar implementations of the umount function (no flags)
in terms of either the __umount2 function, or the corresponding
syscall, or in terms of the old syscall under either of its names.
This patch simplifies the implementations in glibc by always using the
__umount2 function to implement the umount function on all systems
using the Linux kernel. The linux/generic implementation is moved to
sysdeps/unix/sysv/linux (without any changes to code or comments) and
all the other variants are removed. (This will have the effect of
causing the new syscall to be used in some cases that previously used
the old one, but as discussed for previous changes, such a change to
the underlying syscalls used is OK.)
There remain two variants of how the __umount2 function is
implemented, either in umount2.S, or, for ia64, in syscalls.list.
Tested with build-many-glibcs.py.
[BZ #16552]
* sysdeps/unix/sysv/linux/generic/umount.c: Move to ....
* sysdeps/unix/sysv/linux/umount.c: ... here.
* sysdeps/unix/sysv/linux/arm/umount.c: Remove file.
* sysdeps/unix/sysv/linux/hppa/umount.c: Likewise.
* sysdeps/unix/sysv/linux/ia64/umount.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/umount.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/umount.c: Likewise.
* sysdeps/unix/sysv/linux/umount.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/umount.c: Likewise.
Letting rtld access errno through TLS can not work at early stages since
TLS will not be initialized yet. When a private errno is not possible,
we thus have no other way than going through __errno_location.
* include/errno.h [IS_IN(rtld) && !RTLD_PRIVATE_ERRNO]: Do not use the
TLS declaration of errno.
When $(tests-execstack-$(have-z-execstack)) is added to tests before
it is defined, it is empty. This patch adds it to tests after it is
defined.
[BZ #22998]
* elf/Makefile (tests): Add $(tests-execstack-$(have-z-execstack))
after it is defined.
No glibc configuration uses the present debug/backtrace.c, whereas
several #include the x86_64 version. The x86_64 version is
effectively a generic one (using _Unwind_Backtrace from libgcc, which
works much more reliably than the built-in functions used by
debug/backtrace.c). This patch moves it to debug/backtrace.c and
removes all the #includes of the x86_64 version from other
architectures which are no longer required.
I do not know whether all the other architecture-specific backtrace
implementations that are based on _Unwind_Backtrace are required, or
whether, where their differences from the generic version do something
useful, suitable hooks could be added to the generic version to reduce
the duplication involved.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/x86_64/backtrace.c: Move to ....
* debug/backtrace.c: ... here.
* sysdeps/aarch64/backtrace.c: Remove file.
* sysdeps/alpha/backtrace.c: Likewise.
* sysdeps/hppa/backtrace.c: Likewise.
* sysdeps/ia64/backtrace.c: Likewise.
* sysdeps/mips/backtrace.c: Likewise.
* sysdeps/nios2/backtrace.c: Likewise.
* sysdeps/riscv/backtrace.c: Likewise.
* sysdeps/sh/backtrace.c: Likewise.
* sysdeps/tile/backtrace.c: Likewise.
The powerpc and sparc bits/mathinline.h include inlines of fdim and
fdimf. These are not restricted to -fno-math-errno, but do not set
errno, and wrongly use ordered <= comparisons instead of the required
islessequal comparisons (this latter issue is latent on powerpc
because GCC wrongly uses unordered comparison instructions for
operations that should use ordered comparison instructions).
Since we wish to avoid such header inlines anyway, leaving it to the
compiler to inline such standard functions under appropriate
conditions, this patch fixes those issues by removing the inlines in
question (and thus removing the sparc bits/mathinline.h header which
had no other inlines left in it). I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85003> for adding
correct fdim inlines to GCC, since the function is simple enough that
a correct inline is a perfectly reasonable architecture-independent
optimization with -fno-math-errno and in the absence of implicit
excess precision.
Tested with build-many-glibcs.py for all its powerpc and sparc
configurations.
[BZ #22987]
* sysdeps/powerpc/bits/mathinline.h (fdim): Remove inline
function.
(fdimf): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h: Remove file.
Bug 17343 reports that stdlib/random_r.c has code with undefined
behavior because of signed integer overflow on int32_t. This patch
changes the code so that the possibly overflowing computations use
unsigned arithmetic instead.
Note that the bug report refers to "Most code" in that file. The
places changed in this patch are the only ones I found where I think
such overflow can occur.
Tested for x86_64 and x86.
[BZ #17343]
* stdlib/random_r.c (__random_r): Use unsigned arithmetic for
possibly overflowing computations.
* manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): Remove errno
values from Linux-specific section now that it is in the GNU section.
* sysdeps/gnu/errlist.c: Regenerate.
As requested in bug 20079, this patch adds SHT_X86_64_UNWIND (a
standard value from the x86_64 ABI) to elf.h.
Tested for x86_64.
[BZ #20079]
* elf/elf.h (SHT_X86_64_UNWIND): New macro.
Add an undefine of attribute_hidden since it may be defined in some cases
(it must be defined since it is used by some hp-timing configurations).
* benchtests/bench-timing.h (attribute_hidden): Undefine.
Appending / to the path to be looked up would make us always follow a final
symlink, even with O_NOTRANS (since the final resolution is after the
'/'). In the O_DIRECTORY | O_NOFOLLOW case, we thus have to really open
the node and stat it, which we already do anyway, and check for
directory type.
* hurd/hurdlookup.c (__hurd_file_name_lookup): Do not append '/' to
path when flags contains O_NOFOLLOW.
* hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Return ENOTDIR
if flags contains O_DIRECTORY and the result is a directory.
The error code documented by POSIX for opening a symlink with O_NOFOLLOW
is ELOOP.
Also, if the translator does not expose symlink as a symlink translator but
as a S_IFLNK file, O_NOFOLLOW needs to return ELOOP too.
* hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Return ELOOP
when opening a symlink with O_NOFOLLOW.
* hurd/Makefile (routines): Add hurdlock.
* hurd/Versions (GLIBC_PRIVATE): Added new entry to export the above
interface.
(HURD_CTHREADS_0.3): Remove __libc_getspecific.
* hurd/hurdpid.c: Include <lowlevellock.h>
(_S_msg_proc_newids): Use lll_wait to synchronize.
* hurd/hurdsig.c: (reauth_proc): Use __mutex_lock and __mutex_unlock.
* hurd/setauth.c: Include <hurdlock.h>, use integer for synchronization.
* mach/Makefile (lock-headers): Remove machine-lock.h.
* mach/lock-intern.h: Include <lowlevellock.h> instead of
<machine-lock.h>.
(__spin_lock_t): New type.
(__SPIN_LOCK_INITIALIZER): New macro.
(__spin_lock, __spin_unlock, __spin_try_lock, __spin_lock_locked,
__mutex_init, __mutex_lock_solid, __mutex_unlock_solid, __mutex_lock,
__mutex_unlock, __mutex_trylock): Use lll to implement locks.
* mach/mutex-init.c: Include <lowlevellock.h> instead of <cthreads.h>.
(__mutex_init): Initialize with lll.
* manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): New errno values.
* sysdeps/mach/Makefile: Add libmachuser as dependencies for libs
needing lll.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* sysdeps/mach/hurd/cthreads.c (__libc_getspecific): Remove function.
* sysdeps/mach/hurd/bits/libc-lock.h: Remove file.
* sysdeps/mach/hurd/setpgid.c: Include <lowlevellock.h>.
(__setpgid): Use lll for synchronization.
* sysdeps/mach/hurd/setsid.c: Likewise with __setsid.
* sysdeps/mach/bits/libc-lock.h: Include <tls.h> and <lowlevellock.h>
instead of <cthreads.h>.
(_IO_lock_inexpensive): New macro
(__libc_lock_recursive_t, __rtld_lock_recursive_t): New structures.
(__libc_lock_self0): New declaration.
(__libc_lock_owner_self): New macro.
(__libc_key_t): Remove type.
(_LIBC_LOCK_INITIALIZER): New macro.
(__libc_lock_define_initialized, __libc_lock_init, __libc_lock_fini,
__libc_lock_fini_recursive, __rtld_lock_fini_recursive,
__libc_lock_lock, __libc_lock_trylock, __libc_lock_unlock,
__libc_lock_define_initialized_recursive,
__rtld_lock_define_initialized_recursive,
__libc_lock_init_recursive, __libc_lock_trylock_recursive,
__libc_lock_lock_recursive, __libc_lock_unlock_recursive,
__rtld_lock_initialize, __rtld_lock_trylock_recursive,
__rtld_lock_lock_recursive, __rtld_lock_unlock_recursive
__libc_once_define, __libc_mutex_unlock): Reimplement with lll.
(__libc_lock_define_recursive, __rtld_lock_define_recursive,
_LIBC_LOCK_RECURSIVE_INITIALIZER, _RTLD_LOCK_RECURSIVE_INITIALIZER):
New macros.
Include <libc-lockP.h> to reimplement libc_key* with pthread_key*.
* hurd/hurdlock.c: New file.
* hurd/hurdlock.h: New file.
* mach/lowlevellock.h: New file
This makes it notably safe against 'return' and such, and used for
__libc_cleanup_push/pop.
* sysdeps/mach/libc-lock.h (__libc_cleanup_frame): Define structure.
(__libc_cleanup_fct): Define function.
(__libc_cleanup_region_start, __libc_cleanup_region_end,
__libc_cleanup_end): Rewrite implementation using
__attribute__ ((__cleanup__)).
(__libc_cleanup_push, __libc_cleanup_pop): New macros.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Always include
<dl-sysdep.h>. Test for value of RTLD_PRIVATE_ERRNO instead of
testing whether it is defined.
This gets rid of a lot of kludge and gets closer to other ports.
* hurd/Makefile (headers): Remove threadvar.h.
(inline-headers): Remove threadvar.h.
* hurd/Versions (GLIBC_2.0: Remove __hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables,
__hurd_threadvar_max, __hurd_errno_location.
(HURD_CTHREADS_0.3): Add pthread_getattr_np, pthread_attr_getstack.
* hurd/hurd/signal.h: Do not include <hurd/threadvar.h>.
(_hurd_self_sigstate): Use THREAD_SELF to get _hurd_sigstate.
(_HURD_SIGNAL_H_EXTERN_INLINE): Use THREAD_SELF to get _hurd_sigstate,
unless TLS is not initialized yet, in which case we do not need a
critical section yet anyway.
* hurd/hurd/threadvar.h: Include <tls.h>, do not include
<machine-sp.h>.
(__hurd_sigthread_variables, __hurd_threadvar_max): Remove variables
declarations.
(__hurd_threadvar_index): Remove enum.
(_HURD_THREADVAR_H_EXTERN_INLINE): Remove macro.
(__hurd_threadvar_location_from_sp,__hurd_threadvar_location): Remove
inlines.
(__hurd_reply_port0): New variable declaration.
(__hurd_local_reply_port): New macro.
* hurd/hurdsig.c (__hurd_sigthread_variables): Remove variable.
(interrupted_reply_port_location): Add thread_t parameter. Use it
with THREAD_TCB to access thread-local variables.
(_hurdsig_abort_rpcs): Pass ss->thread to
interrupted_reply_port_location.
(_hurd_internal_post_signal): Likewise.
(_hurdsig_init): Use presence of cthread_fork instead of
__hurd_threadvar_stack_mask to start signal thread by hand.
Remove signal thread threadvar initialization.
* hurd/hurdstartup.c: Do not include <hurd/threadvar.h>
* hurd/sigunwind.c: Include <hurd/threadvar.h>
(_hurdsig_longjmp_from_handler): Use __hurd_local_reply_port instead
of threadvar.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add
__libc_lock_self0.
(ld.GLIBC_2.0): Remove __hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables.
(ld.GLIBC_PRIVATE): Add __libc_lock_self0.
* sysdeps/mach/hurd/cthreads.c: Add __libc_lock_self0.
* sysdeps/mach/hurd/dl-sysdep.c (errno, __hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables, threadvars,
__hurd_threadvar_stack_offset, __hurd_threadvar_stack_mask): Do not
define variables.
* sysdeps/mach/hurd/errno-loc.c: Do not include <errno.h> and
<hurd/threadvar.h>.
[IS_IN(rtld)] (rtld_errno): New variable.
[IS_IN(rtld)] (__errno_location): New weak function.
[!IS_IN(rtld)]: Include "../../../csu/errno-loc.c".
* sysdeps/mach/hurd/errno.c: Remove file.
* sysdeps/mach/hurd/fork.c: Include <hurd/threadvar.h>
(__fork): Remove THREADVAR_SPACE macro and its use.
* sysdeps/mach/hurd/i386/init-first.c (__hurd_threadvar_max): Remove
variable.
(init): Do not initialize threadvar.
* sysdeps/mach/hurd/i386/libc.abilist (__hurd_threadvar_max): Remove
symbol.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn): Use
__hurd_local_reply_port instead of threadvar.
* sysdeps/mach/hurd/i386/tls.h (tcbhead_t): Add reply_port and
_hurd_sigstate fields.
(HURD_DESC_TLS, __LIBC_NO_TLS, THREAD_TCB): New macro.
* sysdeps/mach/hurd/i386/trampoline.c: Remove outdated comment.
* sysdeps/mach/hurd/libc-lock.h: Do not include <hurd/threadvar.h>.
(__libc_lock_owner_self): Use &__libc_lock_self0 and THREAD_SELF
instead of threadvar.
* sysdeps/mach/hurd/libc-tsd.h: Remove file.
* sysdeps/mach/hurd/mig-reply.c (GETPORT, reply_port): Remove macros.
(use_threadvar, global_reply_port): Remove variables.
(__hurd_reply_port0): New variable.
(__mig_get_reply_port): Use __hurd_local_reply_port and
__hurd_reply_port0 instead of threadvar.
(__mig_dealloc_reply_port): Likewise.
(__mig_init): Do not initialize threadvar.
* sysdeps/mach/hurd/profil.c: Fix comment.
* sysdeps/generic/thread_state.h (MACHINE_NEW_THREAD_STATE_FLAVOR):
Define macro.
* sysdeps/mach/thread_state.h (MACHINE_THREAD_STATE_FIX_NEW): New macro.
* sysdeps/mach/i386/thread_state.h
(MACHINE_NEW_THREAD_STATE_FLAVOR): New macro, defined to
i386_THREAD_STATE.
(MACHINE_THREAD_STATE_FLAVOR): Define to i386_REGS_SEGS_STATE instead of
i386_THREAD_STATE.
(MACHINE_THREAD_STATE_FIX_NEW): New macro, reads segments.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Use
i386_REGS_SEGS_STATE instead of i386_THREAD_STATE.
* sysdeps/mach/hurd/i386/tls.h (TCB_ALIGNMENT, HURD_SEL_LDT): New
macros.
(_hurd_tls_fork): Add original thread parameter, Duplicate existing LDT
descriptor instead of creating a new one.
(_hurd_tls_new): New function, creates a new descriptor and updates tcb.
* mach/setup-thread.c: Include <ldsodefs.h>.
(__mach_setup_thread): Call _dl_allocate_tls, pass
MACHINE_NEW_THREAD_STATE_FLAVOR to __thread_set_state instead of
MACHINE_THREAD_STATE_FLAVOR, before getting
MACHINE_THREAD_STATE_FLAVOR, calling _hurd_tls_new, and setting
MACHINE_THREAD_STATE_FLAVOR with the result.
* hurd/hurdfault.c (_hurdsig_fault_init): Call
MACHINE_THREAD_STATE_FIX_NEW.
* sysdeps/mach/hurd/fork.c (__fork): Call _hurd_tls_fork for sigthread
too. Add original thread parameter.
Continuing the removals of inline functions from the x86
bits/mathinline.h, this patch removes an inline of __finite (which was
not actually architecture-specific at all beyond its
endianness-dependence).
This inline is not normally used with GCC 4.4 or later, because
isfinite now uses __builtin_isfinite except for -fsignaling-nans.
Allowing __builtin_isfinite etc. to work properly even for
-fsignaling-nans, by implementing versions of those built-in functions
that use integer arithmetic in GCC, is
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66462> (a patch was
committed but had to be reverted because it caused problems, and that
patch didn't address all formats for all architectures, only some, so
by itself would not have been sufficient to allow glibc to use
__builtin_isfinite unconditionally for new-enough GCC).
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC] (__finite):
Remove inline function.
I found the i386 libm-test-ulps files needed updating (probably the
sqrt changes perturbed exactly when excess precision was used by the
compiler).
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
Revert m68k __ieee754_sqrt change as it causes a build failure in one
m68k configuration. m68k-linux-gnu now passes again.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Revert previous
commit.
Remove the now unused target specific__ieee754_sqrt(f/l) inlines.
Also remove inlines of sqrt which are for really old GCC versions.
Removing these is desirable, under the general principle of leaving
such inlining to the compiler rather than trying to do it in installed
headers, especially when only very old compilers are affected.
Note that removing inlines for __ieee754_sqrt disables inlining in the
sqrt wrapper functions. Given the sqrt function will typically only be
called for negative arguments, it doesn't matter whether the inlining
happens or not.
* sysdeps/aarch64/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/generic/math-type-macros.h (M_SQRT): Use sqrt.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove.
* sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/s390/fpu/bits/mathinline.h: Remove file.
* sysdeps/sparc/fpu/bits/mathinline.h (sqrt) Remove.
(sqrtf): Remove.
(sqrtl): Remove.
(__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
(__ieee754_sqrtl): Remove.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove.
* sysdeps/x86/fpu/math_private.h (__ieee754_sqrt): Remove.
* sysdeps/x86_64/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
(__ieee754_sqrtl): Remove.
This patch series cleans up the many uses of __ieee754_sqrt(f/l) in GLIBC.
The goal is to enable GCC to do the inlining, and if this fails call the
__ieee754_sqrt function. This is done by internally declaring sqrt with asm
redirects. The compat symbols and sqrt wrappers need to disable the redirect.
The redirect is also disabled if there are already redirects defined when
using -ffinite-math-only.
All math functions (but not math tests, non-library code and libnldbl) are
built with -fno-math-errno which means GCC will typically inline sqrt as a
single instruction. This means targets are no longer forced to add a special
inline for sqrt.
* include/math.h (sqrt): Declare with asm redirect.
(sqrtf): Likewise.
(sqrtl): Likewise.
(sqrtf128): Likewise.
* Makeconfig: Add -fno-math-errno for libc/libm, but build testsuite,
nonlib and libnldbl with -fmath-errno.
* math/w_sqrt_compat.c: Define NO_MATH_REDIRECT.
* math/w_sqrt_template.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* sysdeps/i386/fpu/w_sqrt.c: Likewise.
* sysdeps/i386/fpu/w_sqrt_compat.c: Likewise.
* sysdeps/generic/math-type-macros-float128.h: Remove math.h and
complex.h.
This patch removes further parts of sysdeps/x86/fpu/bits/mathinline.h
that are only of value for optimization with older compiler versions,
in accordance with general principles of preferring the let the
compiler deal with such inlining through built-in functions.
In general, GCC supports inlining all these functions as of version
4.3 or earlier. However, some inlines in GCC may have had excessively
restrictive conditions in past GCC versions (e.g. requiring
-ffast-math when the inline is valid under broader conditions). (In
particular, GCC had, before GCC 7, unnecessarily restrictive
conditions on when it could apply floor and ceil inlines corresponding
to the ones removed here. The same was true for rint, but
bits/mathinline.h *also* was excessively restrictive there.)
The removed sincos inlines are for __sincos etc. functions (not a
public interface and not currently used in this header either; not in
a part of the header ever used for building glibc itself). Likewise,
the atan2 inlines included one for __atan2l, also not a public
interface and not used for building glibc itself (calls inside glibc
generally use __ieee754_atan2l, for which there is a separate
__LIBC_INTERNAL_MATH_INLINES case in this header).
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h [__FAST_MATH__]
(__sincos_code): Remove define and undefine.
[__FAST_MATH__] (__sincos): Remove inline function.
[__FAST_MATH__] (__sincosf): Remove inline function.
[__FAST_MATH__] (__sincosl): Remove inline function.
(__atan2l): Remove inline functions.
[!__GNUC_PREREQ (3, 4)] (__atan2_code): Remove macro.
[!__GNUC_PREREQ (3, 4) && __FAST_MATH__] (atan2): Remove inline
function.
(floor): Remove inline function.
(ceil): Likewise.
[__FAST_MATH__] (__ldexp_code): Remove macro.
[__FAST_MATH__] (ldexp): Remove inline function.
[__FAST_MATH__ && __USE_ISOC99] (ldexpf): Likewise.
[__FAST_MATH__ && __USE_ISOC99] (ldexpl): Likewise.
[__FAST_MATH__ && __USE_ISOC99] (rint): Likewise.
[__USE_ISOC99] (__lrint_code): Remove macro.
[__USE_ISOC99] (__llrint_code): Likewise.
[__USE_ISOC99] (lrintf): Remove inline function.
[__USE_ISOC99] (lrint): Likewise.
[__USE_ISOC99] (lrintl): Likewise.
[__USE_ISOC99] (llrint): Likewise.
[__USE_ISOC99] (llrintf): Likewise.
[__USE_ISOC99] (llrintl): Likewise.
Currently the benchtests are run with internal GLIBC headers, which is incorrect.
Defining _ISOMAC in the makefile ensures the internal headers are bypassed.
Fix all tests which were relying on internal defines or includes.
* benchtests/Makefile: Define _ISOMAC.
* benchtests/bench-strcoll.c: Add missing sys/stat.h include.
* benchtests/bench-string.h: Define inhibit_loop_to_libcall macro.
* benchtests/bench-strstr.c: Define empty libc_hidden_builtin_def.
* benchtests/bench-strtok.c (oldstrtok): Use rawmemchr.
* benchtests/bench-timing.h: Define attribute_hidden.
As spotted by GNOME translation team, Greek language has the actually
visible difference between the abbreviated nominative and the abbreviated
genitive case for some month names. Examples:
May:
abbreviated nominative: "Μάι" -> abbreviated genitive: "Μαΐ"
July:
abbreviated nominative: "Ιούν" -> abbreviated genitive: "Ιουλ"
and more month names with similar differences.
Original discussion: https://bugzilla.gnome.org/show_bug.cgi?id=793645#c21
[BZ #22937]
* localedata/locales/el_CY (abmon): Rename to...
(ab_alt_mon): This.
(abmon): Import from CLDR (abbreviated genitive case).
* localedata/locales/el_GR (abmon): Rename to...
(ab_alt_mon): This.
(abmon): Import from CLDR (abbreviated genitive case).
A GNOME translator asked to use the same abbreviated month names
as provided by CLDR. This sounds reasonable. See the discussion:
https://bugzilla.gnome.org/show_bug.cgi?id=793645#c27
[BZ #22932]
* localedata/locales/lt_LT (abmon): Synchronize with CLDR.
In accordance with the general principle of preferring to let the
compiler optimize function calls based on their standard semantics
rather than putting inline definitions of such functions in installed
headers, this patch removes various such inline definitions in the x86
bits/mathinline.h that were already disabled for GCC 3.5 or later and
so were only used with very old compilers (for which good optimization
is particularly unimportant); along with those inlines, a definition
of __M_SQRT2, which was only used in such inline functions, is also
removed. This is similar to an early step in removing the string.h
inlines; I intend to follow up with further removals of
bits/mathinline.h inline definitions in appropriate logical groups
(with GCC bugs filed in cases where GCC doesn't already support
corresponding optimizations).
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h [!__GNUC_PREREQ (3, 4)]
(lrintf): Remove definitions used only with old GCC.
[!__GNUC_PREREQ (3, 4)] (lrint): Likewise.
[!__GNUC_PREREQ (3, 4)] (llrintf): Likewise.
[!__GNUC_PREREQ (3, 4)] (llrint): Likewise.
[!__GNUC_PREREQ (3, 4)] (fmaxf): Likewise.
[!__GNUC_PREREQ (3, 4)] (fmax): Likewise.
[!__GNUC_PREREQ (3, 4)] (fminf): Likewise.
[!__GNUC_PREREQ (3, 4)] (fmin): Likewise.
[!__GNUC_PREREQ (3, 4)] (rint): Likewise.
[!__GNUC_PREREQ (3, 4)] (rintf): Likewise.
[!__GNUC_PREREQ (3, 4)] (nearbyint): Likewise.
[!__GNUC_PREREQ (3, 4)] (nearbyintf): Likewise.
[!__GNUC_PREREQ (3, 4)] (ceil): Likewise.
[!__GNUC_PREREQ (3, 4)] (ceilf): Likewise.
[!__GNUC_PREREQ (3, 4)] (floor): Likewise.
[!__GNUC_PREREQ (3, 4)] (floorf): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (tan): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (fmod): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (sin): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (cos): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log10): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (asin): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (acos): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (atan): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log1p): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (logb): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log2): Likewise.
[__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (drem): Likewise.
[__FAST_MATH__] (__M_SQRT2): Remove macro.
The mutually misaligned inputs on aarch64 are compared with a simple
byte copy, which is not very efficient. Enhance the comparison
similar to strcmp by loading a double-word at a time. The peak
performance improvement (i.e. 4k maxlen comparisons) due to this on
the strncmp microbenchmark is as follows:
falkor: 3.5x (up to 72% time reduction)
cortex-a73: 3.5x (up to 71% time reduction)
cortex-a53: 3.5x (up to 71% time reduction)
All mutually misaligned inputs from 16 bytes maxlen onwards show
upwards of 15% improvement and there is no measurable effect on the
performance of aligned/mutually aligned inputs.
* sysdeps/aarch64/strncmp.S (count): New macro.
(strncmp): Store misaligned length in SRC1 in COUNT.
(mutual_align): Adjust.
(misaligned8): Load dword at a time when it is safe.
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
* sysdeps/mach/hurd/reboot.c: Include <hurd/paths.h>
(reboot): Lookup _SERVERS_STARTUP instead of calling proc_getmsgport to get a
port to the startup server.
Jeff Law noticed that native PowerPC builds were broken by my having
made math_ldbl_opt.h not include math.h. nldbl-compat.c formerly got
math.h via libioP.h and math_ldbl_opt.h, *without* __NO_LONG_DOUBLE_MATH;
after my change it got it via nldbl-compat.h *with* __NO_LONG_DOUBLE_MATH,
but __NO_LONG_DOUBLE_MATH mode is forbidden on hosts that define
__HAVE_DISTINCT_FLOAT128, so the build breaks. This is the quick fix.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: Include math.h
before nldbl-compat.h.
The sysdeps/ieee754/ldbl-opt version of math_ldbl_opt.h includes
math.h and math_private.h, despite not having any need for those
headers itself; the sysdeps/generic version doesn't. About 20 files
are relying on math_ldbl_opt.h to include math.h and/or math_private.h
for them, even though none of them necessarily used on a platform that
needs ldbl-opt support.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: Don't include
math.h or math_private.h.
* sysdeps/alpha/fpu/s_isnan.c
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/e_hypot.c
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/e_hypotf.c:
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf.c
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot.c
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf.c:
Include math_private.h.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c
* sysdeps/powerpc/power7/fpu/s_logb.c:
Include math.h and math_private.h.
On Alpha, the register $at is, by default, reserved for use by the
assembler, in the expansion of pseudo-instructions. It's also used
by the special calling convention for _mcount. We get warnings from
Alpha clone.S because the code to call _mcount isn't properly marked
up to tell the assembler not to use $at itself.
* sysdeps/unix/sysv/linux/alpha/clone.s (__clone): Wrap manual
uses of $at in .set noat / .set at.
Since __libc_longjmp is a private interface for cancellation implementation
in libpthread, there is no need to provide hidden __libc_longjmp in libc.
Tested with build-many-glibcs.py.
* include/setjmp.h (__libc_longjmp): Remove libc_hidden_proto.
* setjmp/longjmp.c (__libc_longjmp): Remove libc_hidden_def.
* sysdeps/s390/longjmp.c (__libc_longjmp): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/longjmp.S (__libc_longjmp):
Likewise.
On sparc32 tst-makecontext fails, as backtrace called within a context
created by makecontext to yield infinite backtrace.
Fix that the same way than nios2 by adding a nop just before
__startcontext. This is needed as otherwise FDE lookup just repeatedly
finds __setcontext's FDE in an infinite loop, due to the convention of
using 'address - 1' for FDE lookup.
Changelog:
[BZ #22919]
* sysdeps/unix/sysv/linux/sparc/sparc32/setcontext.S (__startcontext):
Add nop before __startcontext, add explaining comments.
Maciej W. Rozycki
Zack Weinberg
Florian Weimer
Samuel Thibault
H.J. Lu
Adhemerval Zanella
Wilco Dijkstra
Joseph Myers
Jesse Hathaway
Andreas Schwab
Andrew Senkevich
Richard Braun
Agustina Arzille
Siddhesh Poyarekar
Rafal Luzynski
Robert Buj
Dmitry V. Levin
David Michael
Aurelien Jarno