this is a path that should solve bug 15884. It complains about the performance
of strcoll(). It was found out that the runtime of strcoll() is actually bound
to strlen which is needed for calculating the size of a cache that was
installed to improve the comparison performance.
The idea for this patch was that the cache is only useful in rare cases
(strings of same length and same first-level-chars) and that it would be
better to avoid memory allocation at all. To prove this I wrote a performance
test bench-strcoll.c with test data in benchtests-strcoll.tar.gz. Also
modifications in benchtests/Makefile and localedata/Makefile are necessary to
make it work.
After removing the cache the strcoll method showed the predicted behavior
(getting slightly faster) in all but the test case for hindi word sorting.
This was due the hindi text having much more equal words than the other ones.
For equal strings the performance was worse since all comparison levels were
run through and from the second level on the cache improved the comparison
performance of the original version.
Therefore I added a bytewise test via strcmp iff the first level comparison
found that both strings did match because in this case it is very likely that
equal strings are compared. This solved the problem with the hindi test case
and improved the performance of the others.
Performance comparison:
glibc files -33.77%
vi_VN.UTF-8 -34.12%
en_US.UTF-8 -42.42%
ar_SA.UTF-8 -27.49%
zh_CN.UTF-8 +07.90%
cs_CZ.UTF-8 -29.67%
en_GB.UTF-8 -28.50%
da_DK.UTF-8 -36.57%
pl_PL.UTF-8 -39.31%
fr_FR.UTF-8 -28.57%
pt_PT.UTF-8 -22.82%
el_GR.UTF-8 -26.77%
ru_RU.UTF-8 -35.81%
iw_IL.UTF-8 -35.34%
es_ES.UTF-8 -34.46%
hi_IN.UTF-8 -00.38%
sv_SE.UTF-8 -36.99%
hu_HU.UTF-8 -16.35%
tr_TR.UTF-8 -27.80%
is_IS.UTF-8 -33.24%
it_IT.UTF-8 -24.39%
sr_RS.UTF-8 -37.55%
ja_JP.UTF-8 +02.84%
Continuing the series of patches to clean up conformtest expectations
for "POSIX" (1995/6) based on review of the expectations against the
standard, this patch cleans up expectations for sys/utsname.h and
sys/wait.h. Tested x86_64; a new XFAIL for sys/wait.h is added.
* conform/data/sys/utsname.h-data (*_t): Allow.
* conform/data/sys/wait.h-data [POSIX] (uid_t): Do not define.
[POSIX] (WEXITED): Do not expect constant.
[POSIX] (WSTOPPED): Likewise.
[POSIX] (WNOHANG): Likewise.
[POSIX] (WNOWAIT): Likewise.
[POSIX] (siginfo_t): Do not expect type or elements.
[POSIX] (pid_t): Do not expect type.
[POSIX] (signal.h): Do not allow header.
[POSIX] (sys/resource.h): Likewise.
[POSIX] (si_*): Do not allow pattern.
[POSIX] (W*): Likewise.
[POSIX] (P_*): Likewise.
[POSIX] (BUS_*): Likewise.
[POSIX] (CLD_*): Likewise.
[POSIX] (FPE_*): Likewise.
[POSIX] (ILL_*): Likewise.
[POSIX] (POLL_*): Likewise.
[POSIX] (SEGV_*): Likewise.
[POSIX] (SI_*): Likewise.
[POSIX] (TRAP_*): Likewise.
* conform/Makefile (test-xfail-POSIX/sys/wait.h/conform): New
variable.
The recvmsg could return 0 under some conditions and cause the
make_request function to be stuck in an infinite loop.
Thank you Jim King <jim.king@simplivity.com> for posting Paul's patch
on the list.
As far as I can tell, CANCEL-FCT-WAIVE and CANCEL-FILE-WAIVE are old
notes from the addition of cancellation support to glibc and are not
currently used by any glibc testcases or otherwise in the build
process, and it does not seem useful to me to keep them around. This
patch removes them.
Tested for x86_64.
* CANCEL-FCT-WAIVE: Remove file.
* CANCEL-FILE-WAIVE: Likewise.
Continuing the removal of the obsolete INTDEF / INTVARDEF / INTUSE
mechanism, this patch replaces its use for __libc_enable_secure with
the use of rtld_hidden_data_def and rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def
instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* sysdeps/mach/hurd/dl-sysdep.c (__libc_enable_secure): Use
rtld_hidden_data_def instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* elf/dl-deps.c (expand_dst): Likewise.
* elf/dl-load.c (_dl_dst_count): Likewise.
(_dl_dst_substitute): Likewise.
(decompose_rpath): Likewise.
(_dl_init_paths): Likewise.
(open_path): Likewise.
(_dl_map_object): Likewise.
* elf/rtld.c (dl_main): Likewise.
(process_dl_audit): Likewise.
(process_envvars): Likewise.
* include/unistd.h [IS_IN_rtld] (__libc_enable_secure_internal):
Remove declaration.
(__libc_enable_secure): Use rtld_hidden_proto.
Continuing the addition of soft-fp features in the Linux kernel
version, this patch adds _FP_TO_INT support for rsigned == 2 (reduce
overflowing results modulo 2^rsize to fit in the destination, used for
alpha emulation).
The kernel version is buggy; it can left shift by a negative amount
when right shifting is required in an overflow case (the kernel
version also has other bugs fixed long ago in glibc; at least,
spurious exceptions converting to the most negative integer). This
version avoids that by handling overflow (other than to 0) for rsigned
== 2 along with the normal non-overflow case, which already properly
determines the direction in which to shift.
Tested for powerpc-nofpu. Some functions get slightly bigger and some
get slightly smaller, no doubt as a result of the change to where in
the macro "inexact" is raised, but I don't think those changes are
significant. Also tested for powerpc-nofpu with the relevant __fix*
functions changed to use rsigned == 2 (which is after all just as
valid as rsigned == 1 in IEEE terms), including verifying the results
and exceptions for various cases of conversions.
With these seven patches, the one remaining feature to add for the
soft-fp code to have all the features of the kernel version is
_FP_TO_INT_ROUND.
* soft-fp/op-common.h (_FP_TO_INT): Handle rsigned == 2.
As previously discussed
<https://sourceware.org/ml/libc-alpha/2013-10/msg00345.html>, it would
be desirable to be able to use the same version of the soft-fp code in
the Linux kernel as well as in glibc and libgcc (instead of an old
version in the kernel that's missing ten years of bug fixes,
performance improvements and new features), and to that end it is
useful to add to glibc's copy features in the kernel's copy, even when
they are not directly useful in glibc.
To that end, this patch adds one of those features: support for more
precise "invalid" exceptions describing the particular kind of invalid
operation. These are relevant for powerpc emulation, and are also as
described in IEEE 754-2008 as sub-exceptions.
The set of sub-exceptions here is the union of those supported on
powerpc and those from IEEE 754-2008 (the former adds a distinction
between 0/0 and Inf/Inf; the latter adds a distinction between Inf*0
from multiplication and the same from fma). This includes
sub-exceptions for sqrt, conversions to integer and comparisons that
are not supported in the kernel; I see no obvious reason for these
being missing from the kernel support, given that they are supported
on powerpc so accurate powerpc emulation should generate them.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/soft-fp.h (FP_EX_INVALID_SNAN): New macro.
(FP_EX_INVALID_IMZ): Likewise.
(FP_EX_INVALID_IMZ_FMA): Likewise.
(FP_EX_INVALID_ISI): Likewise.
(FP_EX_INVALID_ZDZ): Likewise.
(FP_EX_INVALID_IDI): Likewise.
(FP_EX_INVALID_SQRT): Likewise.
(FP_EX_INVALID_CVI): Likewise.
(FP_EX_INVALID_VC): Likewise.
* soft-fp/op-common.h (_FP_UNPACK_CANONICAL): Specify more precise
"invalid" exceptions.
(_FP_CHECK_SIGNAN_SEMIRAW): Likewise.
(_FP_ADD_INTERNAL): Likewise.
(_FP_MUL): Likewise.
(_FP_FMA): Likewise.
(_FP_DIV): Likewise.
(_FP_CMP_CHECK_NAN): Likewise.
(_FP_SQRT): Likewise.
(_FP_TO_INT): Likewise.
(FP_EXTEND): Likewise.
This patch removes use of the obsolete INTDEF/INTUSE mechanism for
__cxa_atexit, replacing it with libc_hidden_def/libc_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* stdlib/cxa_atexit.c (__cxa_atexit): Use libc_hidden_def instead
of INTDEF.
* include/stdlib.h (__cxa_atexit_internal): Remove declaration.
(__cxa_atexit): Use libc_hidden_proto.
[!NOT_IN_libc] (__cxa_atexit): Remove macro definition.
This patch removes some stray (unused) *_internal aliases, and
function prototypes with no corresponding definitions at all, at least
some of which were missed in previous INTDEF / INTUSE removal.
Not removed in this patch: __canonicalize_directory_name_internal,
noticed in the course of preparing this patch, isn't an alias, but an
actual function in sysdeps/mach/hurd/getcwd.c - apparently unused,
however.
Tested for x86_64 that installed stripped shared libraries are
unchanged by this patch.
[BZ #14132]
* include/wctype.h [!_ISOMAC] (__iswalpha_l_internal): Remove
declaration.
[!_ISOMAC] (__iswdigit_l_internal): Likewise.
[!_ISOMAC] (__iswspace_l_internal): Likewise.
[!_ISOMAC] (__iswxdigit_l_internal): Likewise.
[!_ISOMAC] (__iswctype_internal): Likewise.
* stdio-common/siglist.c (_sys_siglist_internal): Remove alias.
* sysdeps/unix/syscalls.list (chown): Remove __chown_internal
alias.
(fcntl): Remove __fcntl_internal alias.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (connect): Remove
__connect_internal alias.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list (connect):
Likewise.
Continuing the addition of soft-fp features used in the Linux kernel,
this patch adds soft-fp support for FP_DENORM_ZERO (flushing input
subnormal operands to zero of the same sign).
There are some differences from the kernel version. In the kernel,
the "inexact" exception is set when flushing to zero. This does not
appear to match the documented semantics for either of the
architectures (alpha and sh) for which the kernel uses FP_DENORM_ZERO,
so this patch does not set "inexact" in this case. More operations
now use raw or semi-raw unpacking for optimization than did in the
ten-year-old soft-fp version in the kernel, so checks of
FP_DENORM_ZERO are inserted in those operations. They are also
inserted for comparisons (which already used raw unpacking in the old
version) as I believe that's the correct thing to do when input
subnormals are flushed to zero. They are *not* inserted for _FP_NEG.
(If any processors do flush input subnormals to zero for negation, or
otherwise vary from the rules implemented when FP_DENORM_ZERO is set,
further macros for sfp-machine.h to control this may need to be
added.)
Although the addition for comparisons will cause FP_EX_DENORM to be
set in this case, it still won't be set for comparisons involving
subnormals when not flushed to zero. It's quite possible that
accurate emulation of processors that have such an exception for
subnormal operands will require further changes relating to when
FP_EX_DENORM is set (in general, the support for things defined by
IEEE should be considered more reliable and mature than the support
for things outside the scope of IEEE floating point).
Although some processors also have a mode for abrupt underflow -
producing zeroes instead of output subnormals - there is no such mode
in the kernel's soft-fp, so no such mode is added to glibc's soft-fp
(although it could be if someone wanted to emulate such processor
support).
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/soft-fp.h (FP_DENORM_ZERO): New macro.
* soft-fp/op-common.h (_FP_UNPACK_CANONICAL): Check
FP_DENORM_ZERO.
(_FP_CHECK_FLUSH_ZERO): New macro.
(_FP_ADD_INTERNAL): Call _FP_CHECK_FLUSH_ZERO.
(_FP_CMP): Likewise.
(_FP_CMP_EQ): Likewise.
(_FP_TO_INT): Do not set inexact for subnormal arguments if
FP_DENORM_ZERO.
(FP_EXTEND): Call _FP_CHECK_FLUSH_ZERO.
(FP_TRUNC): Likewise.
This patch fixes a latent bug in _FP_TO_INT regarding handling of
arguments with maximum exponent (infinities and NaNs). If the maximum
exponent is below that calculated as an overflow threshold, such
values would incorrectly be treated as normal values for the purposes
of the conversion. This could not occur for any of the conversions
actually occurring in glibc, libgcc or the Linux kernel (the maximum
exponent for float is, just, big enough to ensure overflow for
unsigned __int128), but would apply if soft-fp were used for IEEE
binary16. Appropriate checks are inserted to ensure that the maximum
exponent is always treated as an overflowing exponent, and never as a
normal one.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/op-common.h (_FP_TO_INT): Ensure maximum exponent is
treated as invalid conversion, not as normal exponent.
This patch refactors how soft-fp comparisons handle setting exceptions
for NaN operands, so that exceptions are set through the FP_CMP macros
rather than directly in the C files calling them.
The _FP_CMP* and FP_CMP* macros gain an extra argument to specify when
exceptions should be set, 0 for no exception setting (I'm not sure
this is actually needed - at least it's not needed for IEEE operations
in glibc / libgcc, but might be relevant in some cases for kernel
use), 1 for exceptions only for signaling NaNs and 2 for exceptions
for all NaNs. This argument is handled through _FP_CMP_CHECK_NAN,
newly called by the _FP_CMP* macros when a NaN is encountered. Calls
to these macros are updated, which eliminates all the existing
checking and exception setting in soft-fp *.c files in glibc.
Tested for powerpc-nofpu. (The __unord* functions have no code
changes; the __eq* / __ge* / __le* functions get slightly larger, but
I don't think that's significant.)
* soft-fp/op-common.h (_FP_CMP_CHECK_NAN): New macro.
(_FP_CMP): Add extra argument EX. Call _FP_CMP_CHECK_NAN.
(_FP_CMP_EQ): Likewise.
(_FP_CMP_UNORD): Likewise.
* soft-fp/double.h (FP_CMP_D): Add extra argument EX.
(FP_CMP_EQ_D): Likewise.
(FP_CMP_UNORD_D): Likewise.
* soft-fp/extended.h (FP_CMP_E): Likewise.
(FP_CMP_EQ_E): Likewise.
(FP_CMP_UNORD_E): Likewise.
* soft-fp/quad.h (FP_CMP_Q): Likewise.
(FP_CMP_EQ_Q): Likewise.
(FP_CMP_UNORD_Q): Likewise.
* soft-fp/single.h (FP_CMP_S): Likewise.
(FP_CMP_EQ_S): Likewise.
(FP_CMP_UNORD_S): Likewise.
* soft-fp/eqdf2.c (__eqdf2): Update call to FP_CMP_EQ_D.
* soft-fp/eqsf2.c (__eqsf2): Update call to FP_CMP_EQ_S.
* soft-fp/eqtf2.c (__eqtf2): Update call to FP_CMP_EQ_Q.
* soft-fp/gedf2.c (__gedf2): Update call to FP_CMP_D.
* soft-fp/gesf2.c (__gesf2): Update call to FP_CMP_S.
* soft-fp/getf2.c (__getf2): Update call to FP_CMP_Q.
* soft-fp/ledf2.c (__ledf2): Update call to FP_CMP_D.
* soft-fp/lesf2.c (__lesf2): Update call to FP_CMP_S.
* soft-fp/letf2.c (__letf2): Update call to FP_CMP_Q.
* soft-fp/unorddf2.c (__unorddf2): Update call to FP_CMP_UNORD_D.
* soft-fp/unordsf2.c (__unordsf2): Update call to FP_CMP_UNORD_S.
* soft-fp/unordtf2.c (__unordtf2): Update call to FP_CMP_UNORD_Q.
* sysdeps/alpha/soft-fp/ots_cmpe.c (internal_compare): Update call
to FP_CMP_Q.
* sysdeps/sparc/sparc32/soft-fp/q_cmp.c (_Q_cmp): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc32/soft-fp/q_cmpe.c (_Q_cmpe): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_feq.c (_Q_feq): Update call to
FP_CMP_EQ_Q.
* sysdeps/sparc/sparc32/soft-fp/q_fge.c (_Q_fge): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc32/soft-fp/q_fgt.c (_Q_fgt): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_fle.c (_Q_fle): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_flt.c (_Q_flt): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_fne.c (_Q_fne): Update call to
FP_CMP_EQ_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_cmp.c (_Qp_cmp): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_cmpe.c (_Qp_cmpe): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_feq.c (_Qp_feq): Update call to
FP_CMP_EQ_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_fge.c (_Qp_fge): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_fgt.c (_Qp_fgt): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_fle.c (_Qp_fle): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_flt.c (_Qp_flt): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_fne.c (_Qp_fne): Update call to
FP_CMP_EQ_Q.
This patch fixes a soft-fp corner case I previously noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00349.html>: when
trapping on underflow is enabled, extensions of subnormals from XFmode
to TFmode need to signal underflow because the result is tiny (but
exact, so the underflow flag is not raised unless trapping is
enabled).
To avoid any excess initialization or tests for other cases of
floating-point extensions, a new FP_INIT_TRAPPING_EXCEPTIONS is added
that does the initialization required for this particular case (more
than FP_INIT_EXCEPTIONS, less than FP_INIT_ROUNDMODE, in general), and
FP_NO_EXACT_UNDERFLOW is added to stub out FP_TRAPPING_EXCEPTIONS
tests for those cases of extensions where the test would be dead code,
to avoid any uninitialized variable warnings.
As the relevant case only applies in libgcc, not to any use of soft-fp
in glibc, there is no bug report in Bugzilla and no non-default
definitions of FP_INIT_TRAPPING_EXCEPTIONS are added by the patch. A
testcase will be added to GCC as part of an update of soft-fp in
libgcc once this patch is in libc.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch. Bootstrapped GCC with updated
soft-fp with no regressions on x86_64-unknown-linux-gnu and verified
that a test of the relevant case passes where it failed before.
* soft-fp/op-common.h (FP_EXTEND): When a subnormal input produces
a subnormal result, set the underflow exception if trapping on
underflow is enabled.
* soft-fp/soft-fp.h (FP_INIT_TRAPPING_EXCEPTIONS): New macro.
(FP_INIT_EXCEPTIONS): Default to FP_INIT_TRAPPING_EXCEPTIONS.
[FP_NO_EXACT_UNDERFLOW] (FP_TRAPPING_EXCEPTIONS): Undefine and
redefine to 0.
* soft-fp/extenddftf2.c (FP_NO_EXACT_UNDERFLOW): Define.
* soft-fp/extendsfdf2.c (FP_NO_EXACT_UNDERFLOW): Likewise.
* soft-fp/extendsftf2.c (FP_NO_EXACT_UNDERFLOW): Likewise.
* soft-fp/extendxftf2.c (__extendxftf2): Use
FP_INIT_TRAPPING_EXCEPTIONS instead of FP_INIT_ROUNDMODE.
As noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00516.html>, the
soft-fp macro FP_CLEAR_EXCEPTIONS should not be necessary, as soft-fp
code should never set an exception and later clear it.
In fact, all four uses in glibc (for SPARC) are indeed unnecessary:
they appear in files that convert 32-bit or 64-bit integers to IEEE
binary128, an operation that can never raise any exceptions. If this
was intended to enable the compiler to optimize away any FP_FROM_INT
code testing for exceptional cases, we now have a better way of doing
this: defining FP_NO_EXCEPTIONS before including soft-fp.h causes all
code handling exceptions to be stubbed out, and the rounding mode to
be hardwired for round-to-zero, to allow such optimizations for source
files where (a) the operation in question, for the particular types in
question, can never raise exceptions, but (b) some instances of the
operation for other types can, so the macros used in the file do
contain references to rounding or exceptions, albeit dead in that
particular file.
The uses in the Linux kernel are also unnecessary (clearing exceptions
at a point where they are already cleared).
This patch duly removes FP_CLEAR_EXCEPTIONS, making the SPARC code in
question use FP_NO_EXCEPTIONS and stop using exception-related macros.
* soft-fp/soft-fp.h (FP_CLEAR_EXCEPTIONS): Remove macro.
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: Define FP_NO_EXCEPTIONS.
(_Q_itoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_lltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_ulltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: Define FP_NO_EXCEPTIONS.
(_Q_utoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
Bug 14132 is removal of the old INTDEF/INTUSE system of *_internal
aliases as obsoleted by the hidden_proto / hidden_def system. Various
cases were cleaned up in 2012, but some remain. This patch removes
the use of this mechanism for __adjtimex.
Tested for x86_64 that stripped installed shared libraries are
unchanged by the patch.
[BZ #14132]
* sysdeps/unix/sysv/linux/include/sys/timex.h: New file.
* sysdeps/unix/sysv/linux/adjtime.c [!ADJTIMEX] (ADJTIMEX): Do not
use INTUSE.
[!ADJTIMEX] (INTUSE(__adjtimex)): Remove declaration.
* sysdeps/unix/sysv/linux/alpha/adjtime.c (__adjtimex_internal):
Remove alias.
(__adjtimex): Define using libc_hidden_ver.
* sysdeps/unix/sysv/linux/ntp_gettime.c (INTUSE(__adjtimex)):
Remove declaration.
(ntp_gettime): Call __adjtimex directly.
* sysdeps/unix/sysv/linux/ntp_gettimex.c (INTUSE(__adjtimex)):
Remove declaration.
(ntp_gettimex): Call __adjtimex directly.
* sysdeps/unix/sysv/linux/syscalls.list (adjtimex): Remove
__adjtimex_internal alias.
This patch enables syscalls.list entries to specify both compat and
non-compat symbol versions for the same syscall definition, making use
of this for setrlimit / chown / lchown where the inability to specify
such aliases showed up in the course of work on bug 14138.
The change to make-syscalls.sh is minimal: adding a SHARED conditional
on the compat_symbol calls. It remains the case that if a compat
symbol version is specified, the syscall is only built for the shared
library at all if an explicit symbol version is given for a non-compat
symbol (so it's necessary to specify "lchown@@GLIBC_2.0
chown@GLIBC_2.0" rather than just "lchown chown@GLIBC_2.0"). It also
remains the case, as already commented in make-syscalls.sh, that no
SHLIB_COMPAT conditionals are generated, so there would be problems if
the same syscalls.list file, with compat symbols, were used for both
configurations that should have those symbols and configurations for
which they should be conditioned out with SHLIB_COMPAT.
Tested for x86.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Condition
compat_symbol calls on [SHARED].
* sysdeps/unix/sysv/linux/powerpc/lchown.S: Remove file.
* sysdeps/unix/sysv/linux/i386/syscalls.list (oldsetrlimit):
Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(lchown): New syscall entry.
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves various definitions of chown, lchown and fchown.
In most cases the need for special syscalls.list entries (rather than
existing generic ones) is because these architectures use chown32,
lchown32 and fchown32 as syscall names. Some architectures also have
symbol versioning compatibility for older versions of chown having
been equivalent to lchown.
In the case of powerpc, chown.c (providing the chown@@GLIBC_2.1
default version) is replaced by a syscalls.list entry (for powerpc32;
powerpc64 has no need for this because of its more recent minimum
symbol version, so can just use the entry in
sysdeps/unix/syscalls.list), but lchown.S is left as-is because it
provides the compat version of chown as an actual alias for __lchown,
which is not yet supported by syscalls.list. This file can be removed
once such aliases are supported in syscalls.list.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/fchown.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise.
* sysdeps/unix/sysv/linux/arm/syscalls.list (lchown): Add syscall.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (chown):
Likewise.
Customize memcmp.c for tile, using similar tricks from memcpy:
- replace MERGE macro with dblalign.
- replace memcmp_bytes function with revbytes.
- use __glibc_likely.
- use post-increment addressing.
The schedule is still not perfect: the compiler is not hoisting
code above the comparison branch, which could save a bundle or two.
memcmp speeds up by 30-40% on shorter aligned tests in benchtest,
with some tests with unaligned lengths taking a small performance hit.
strnlen() is based on the existing tile strlen() with length
checking added. It speeds up by up to 5x, but on average across
the benchtest corpus by around 35%. No regressions are seen.
strstr() does 8-byte aligned loads and compares using a 2-byte
filter on the first two bytes of the needle and then testing
the remaining bytes in needle using memcmp(). It speeds up
about 5x in the best case (for "found" needles), about 2x looking
at benchtest as a whole, with some slowdowns as much as 45%.
on a few cases (including the "fail" case for 128KB search).
strcasestr() is based on strstr() but uses a SIMD tolower
routine to convert 8-bytes to lower case in 5 instructions.
It also uses a 2-byte filter and then strncasecmp() for the
remaining bytes. strncasecmp() is not optimized for SIMD, so
there is futher room for improvement. However, it is still up
to 16x faster for "found" needles, averaging 2x faster on the
whole corpus of benchtests. It does slow down by up to 35%
on a few cases, similarly to strstr().
Continuing the move of syscall definitions to syscalls.list, where
previous cleanups have made this possible, this patch moves the
definition of execve. (In this case, it was the removal of bounded
pointers support, rather than old kernel support, which made the move
possible.)
Tested for x86_64.
[BZ #14138]
* sysdeps/unix/sysv/linux/execve.c: Remove file.
* sysdeps/unix/sysv/linux/syscalls.list (execve): Add syscall.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves definitions of various *at functions in
sysdeps/unix/sysv/linux/.
These particular moves are straightforward: there are no #includes of
these source files, no special architecture-specific versions, no
special symbol version handling and no aliases. Each source file can
be replaced by a single line in sysdeps/unix/sysv/linux/syscalls.list.
Tested for x86_64.
[BZ #14138]
* sysdeps/unix/sysv/linux/syscalls.list (fchownat): New syscall.
(linkat): Likewise.
(mkdirat): Likewise.
(readlinkat): Likewise.
(renameat): Likewise.
(symlinkat): Likewise.
(unlinkat): Likewise.
* sysdeps/unix/sysv/linux/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/linkat.c: Likewise.
* sysdeps/unix/sysv/linux/mkdirat.c: Likewise.
* sysdeps/unix/sysv/linux/readlinkat.c: Likewise.
* sysdeps/unix/sysv/linux/renameat.c: Likewise.
* sysdeps/unix/sysv/linux/symlinkat.c: Likewise.
* sysdeps/unix/sysv/linux/unlinkat.c: Likewise.
Building this test on ARM fails because the prototypes for the long
double variants of the math functions are unavailable.
Add an additional include guard to math.h that enables long double math
function declarations if _LIBC_TEST is defined and define _LIBC_TEST in
stdlib/tst-strtod-round.c.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* math/math.h: Define long double math functions if
_LIBC_TEST is defined.
* stdlib/tst-strtod-round.c: Define _LIBC_TEST.
Allow building tests in a cross configuration without a test wrapper
defined. This is helpful for doing simple build testing of tests.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* localedata/Makefile: Move assignment to tests-special
into an ifdef testing run-built-tests.
* timezone/Makefile: Likewise.
tst-ld-sse-use.sh is a bash script, not a POSIX shell script, and so
needs to be run with $(BASH) not $(SHELL) to avoid errors of the form:
../sysdeps/x86/tst-ld-sse-use.sh: 41: ../sysdeps/x86/tst-ld-sse-use.sh: declare: not found
(when /bin/sh is dash). This patch makes that change.
Tested for x86_64.
* sysdeps/x86/Makefile ($(objpfx)tst-ld-sse-use.out): Run script
with $(BASH) not $(SHELL).
During auditing or profiling modes the dynamic loader
builds a cache of the relocated PLT entries in order
to reuse them when called again through the same PLT
entry. This way the PLT entry is never completed and
the call into the resolver always results in profiling
or auditing code running.
The problem is that the PLT relocation cache size
is not computed correctly. The size of the cache
should be "Size of a relocation result structure"
x "Number of PLT-related relocations". Instead the
code erroneously computes "Size of a relocation
result" x "Number of bytes worth of PLT-related
relocations". I can only assume this was a mistake
in the understanding of the value of DT_PLTRELSZ
which is the number of bytes of PLT-related relocs.
We do have a DT_RELACOUNT entry, which is a count
for dynamic relative relocs, but we have no
DT_PLTRELCOUNT and thus we need to compute it.
This patch corrects the computation of the size of the
relocation table used by the glibc profiling code.
For more details see:
https://sourceware.org/ml/libc-alpha/2014-09/msg00513.html
[BZ #17411]
* elf/dl-reloc.c (_dl_relocate_object): Allocate correct amount for
l_reloc_result.
When a shlib-versions file has a DEFAULT line, it's not necessary to
specify the same default minimum symbol version on the lines for
individual libraries. If those lines otherwise duplicate the default
SONAME for the library in question, they can be removed completely.
This patch makes such cleanups: version entries for ld.so are removed
(leaving just the definition of the architecture-specific dynamic
linker name) and entries for libpthread are removed completely (since
the default is libpthread.so.0).
Tested for x86_64 that the installed shared libraries are unchanged by
this patch.
There are various architectures (hppa, ia64, mips, sh, sparc64) that
define minimum symbol versions (or in the case of mips, omission of
symbol versions) only for particular libraries without a DEFAULT line.
None of these are equivalent to something simpler with a DEFAULT line
because all have some other libraries, not explicitly mentioned, with
symbol versions that would be omitted were such a line used. In the
mips case I'm pretty sure it was a mistake not to omit the 2.1 symbols
for libthread_db; for the others I don't know if it was a mistake or
deliberate that some symbols in various libraries have 2.0 or 2.1
versions despite other libraries having a 2.2 minimum.
This concludes the shlib-versions cleanups I'm aware of.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Do not
specify symbol version for ld.so. Do not include entry for
libpthread.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
Roland McGrath
Siddhesh Poyarekar
Leonhard Holz
Joseph Myers
Kostya Serebryany
Allan McRae
Adhemerval Zanella
Chris Metcalf
Arjun Shankar
Steve Ellcey
Will Newton
Carlos O'Donell
H.J. Lu