Commit Graph

2055 Commits

Author SHA1 Message Date
Szabolcs Nagy e70c176825 Add new exp and exp2 implementations
Optimized exp and exp2 implementations using a lookup table for
fractional powers of 2.  There are several variants, see e_exp_data.c,
they can be selected by modifying math_config.h allowing different
tradeoffs.

The default selection should be acceptable as generic libm code.
Worst case error is 0.509 ULP for exp and 0.507 ULP for exp2, on
aarch64 the rodata size is 2160 bytes, shared between exp and exp2.
On aarch64 .text + .rodata size decreased by 24912 bytes.

The non-nearest rounding error is less than 1 ULP even on targets
without efficient round implementation (although the error rate is
higher in that case).  Targets with single instruction, rounding mode
independent, to nearest integer rounding and conversion can use them
by setting TOINT_INTRINSICS and adding the necessary code to their
math_private.h.

The __exp1 code uses the same algorithm, so the error bound of pow
increased a bit.

New double precision error handling code was added following the
style of the single precision error handling code.

Improvements on Cortex-A72 compared to current glibc master:
exp thruput: 1.61x in [-9.9 9.9]
exp latency: 1.53x in [-9.9 9.9]
exp thruput: 1.13x in [0.5 1]
exp latency: 1.30x in [0.5 1]
exp2 thruput: 2.03x in [-9.9 9.9]
exp2 latency: 1.64x in [-9.9 9.9]

For small (< 1) inputs the current exp code uses a separate algorithm
so the speed up there is less.

Was tested on
aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and
arm-linux-gnueabihf (!TOINT_INTRINSICS, no fma contraction) and
x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction) and
powerpc64le-linux-gnu (!TOINT_INTRINSICS, fma contraction) targets,
only non-nearest rounding ulp errors increase and they are within
acceptable bounds (ulp updates are in separate patches).

	* NEWS: Mention exp and exp2 improvements.
	* math/Makefile (libm-support): Remove t_exp.
	(type-double-routines): Add math_err and e_exp_data.
	* sysdeps/aarch64/libm-test-ulps: Update.
	* sysdeps/arm/libm-test-ulps: Update.
	* sysdeps/i386/fpu/e_exp_data.c: New file.
	* sysdeps/i386/fpu/math_err.c: New file.
	* sysdeps/i386/fpu/t_exp.c: Remove.
	* sysdeps/ia64/fpu/e_exp_data.c: New file.
	* sysdeps/ia64/fpu/math_err.c: New file.
	* sysdeps/ia64/fpu/t_exp.c: Remove.
	* sysdeps/ieee754/dbl-64/e_exp.c: Rewrite.
	* sysdeps/ieee754/dbl-64/e_exp2.c: Rewrite.
	* sysdeps/ieee754/dbl-64/e_exp_data.c: New file.
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Update error bound.
	* sysdeps/ieee754/dbl-64/eexp.tbl: Remove.
	* sysdeps/ieee754/dbl-64/math_config.h: New file.
	* sysdeps/ieee754/dbl-64/math_err.c: New file.
	* sysdeps/ieee754/dbl-64/t_exp.c: Remove.
	* sysdeps/ieee754/dbl-64/t_exp2.h: Remove.
	* sysdeps/ieee754/dbl-64/uexp.h: Remove.
	* sysdeps/ieee754/dbl-64/uexp.tbl: Remove.
	* sysdeps/m68k/m680x0/fpu/e_exp_data.c: New file.
	* sysdeps/m68k/m680x0/fpu/math_err.c: New file.
	* sysdeps/m68k/m680x0/fpu/t_exp.c: Remove.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Update.
2018-09-05 16:22:00 +01:00
Florian Weimer 2bda273aa3 reallocarray: Declare under _DEFAULT_SOURCE
Initially, this function was restricted to _GNU_SOURCE, but experience
shows that compatibility with existing build systems is improved if we
declare it under _DEFAULT_SOURCE as well.
2018-08-30 14:14:53 +02:00
Wilco Dijkstra 3bded567a7 Update NEWS for sinf improvements
The NEWS entry for sinf improvements is listed for 2.28, while it was
committed in 2.29, so move it there and mention tanf.

Committed as obvious.

	* NEWS: Move optimized sinf entry to 2.29.
2018-08-23 12:55:28 +01:00
Wilco Dijkstra 599cf39766 Improve performance of sinf and cosf
The second patch improves performance of sinf and cosf using the same
algorithms and polynomials.  The returned values are identical to sincosf
for the same input.  ULP definitions for AArch64 and x64 are updated.

sinf/cosf througput gains on Cortex-A72:
* |x| < 0x1p-12 : 1.2x
* |x| < M_PI_4  : 1.8x
* |x| < 2 * M_PI: 1.7x
* |x| < 120.0   : 2.3x
* |x| < Inf     : 3.0x

	* NEWS: Mention sinf, cosf, sincosf.
	* sysdeps/aarch64/libm-test-ulps: Update ULP for sinf, cosf, sincosf.
	* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sinf and cosf.
	* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Add definitions of
	constants rather than including generic sincosf.h.
	* sysdeps/x86_64/fpu/s_sincosf_data.c: Remove.
	* sysdeps/ieee754/flt-32/s_cosf.c (cosf): Rewrite.
	* sysdeps/ieee754/flt-32/s_sincosf.h (reduced_sin): Remove.
	(reduced_cos): Remove.
	(sinf_poly): New function.
	* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Rewrite.
2018-08-14 10:45:59 +01:00
Carlos O'Donell 08a5ee14c6 Add convenience target 'install-locale-files'.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.

You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
2018-08-02 15:31:12 -04:00
Siddhesh Poyarekar dce452dc52 Rename the glibc.tune namespace to glibc.cpu
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to.  Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses.  Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.

	* NEWS: Mention the change.
	* elf/dl-tunables.list: Rename tune namespace to cpu.
	* sysdeps/powerpc/dl-tunables.list: Likewise.
	* sysdeps/x86/dl-tunables.list: Likewise.
	* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
	cpu.name.
	* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
	* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
	* manual/README.tunables: Likewise.
	* manual/tunables.texi: Likewise.
	* sysdeps/powerpc/cpu-features.c: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
	(init_cpu_features): Likewise.
	* sysdeps/x86/cpu-features.c: Likewise.
	* sysdeps/x86/cpu-features.h: Likewise.
	* sysdeps/x86/cpu-tunables.c: Likewise.
	* sysdeps/x86_64/Makefile: Likewise.
	* sysdeps/x86/dl-cet.c: Likewise.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-08-02 23:49:19 +05:30
Carlos O'Donell 437faa9675 Open master branch for glibc 2.29 development 2018-08-01 01:35:02 -04:00
Carlos O'Donell 3c03baca37 Update NEWS, version.h, and features.h for glibc 2.28. 2018-08-01 01:10:47 -04:00
Carlos O'Donell 97f2237efa Update NEWS with ISO 14651 update information. 2018-07-27 16:03:55 -04:00
Rafal Luzynski e607a35200 NEWS: Avoid the words "nominative" and "genitive".
Glibc supports two grammatical forms of month names and we keep adding
the locale data which actually use this feature but those two forms are
not necessarily nominative and genitive.  It is better to use a more
generic term.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-27 21:45:24 +02:00
Adhemerval Zanella 969c335506 Mention ISO C threads addition
* NEWS: Add ISO C threads addition.
2018-07-24 19:35:03 -03:00
H.J. Lu e84bd8514c INSTALL: Add a note for Intel CET status
* NEWS: Add a note for Intel CET status.
	* manual/install.texi: Likewise.
	* INSTALL: Regenerated.
2018-07-19 12:05:10 -07:00
Quentin PAGÈS df467d229a oc_FR locale: Multiple updates (bug 23140, bug 23422).
Multiple updates for Occitan language including alternative month names,
update abday and abmon, fix typos in day, fix d_fmt, correct LC_NAME,
and use “copy "ca_ES"” as LC_COLLATE.

	[BZ #23140]
	* localedata/locales/oc_FR (mon): Rename to...
	(alt_mon): This, then update October (typo fix).
	(mon): New content (genitive case, month names preceded by
	"de" or "d’").

	[BZ #23422]
	* localedata/locales/oc_FR (abday): Update all items.
	(day): Update Wednesday and Saturday (typo fixes).
	(abmon): Update all items, except May.
	(d_fmt): Update "%d.%m.%Y" -> "%d/%m/%Y".
	(LC_IDENTIFICATION): Bump the revision number and date.
	Keep the "category" entries in alphabetic order.
	(LC_ADDRESS): Remove no longer needed comment.
	(LC_COLLATE): Use “copy "ca_ES"”.
	(LC_NAME): Set the correct values of "name_fmt", "name_mr", and
	"name_mrs".

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-18 23:17:17 +02:00
H.J. Lu e6c695099b Intel CET: Document --enable-cet
* NEWS: Mention --enable-cet.
	* manual/install.texi: Document --enable-cet.
	* INSTALL: Regenerated.
2018-07-18 09:52:53 -07:00
Valery Timiriliyev 61c4aad705 New locale: Yakut (Sakha) for Russia (sah_RU) [BZ #22241]
* localedata/Makefile (test-input): Add sah_RU.UTF-8.
	(LOCALES): Likewise.
	* localedata/SUPPORTED (sah_RU/UTF-8): New entry.
	* localedata/locales/sah_RU: New file.
	* localedata/sah_RU.UTF-8.in: New file.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-18 11:45:44 +02:00
Rafal Luzynski 9145f0333d os_RU: Add alternative month names (bug 23140).
[BZ #23140]
	* localedata/locales/os_RU (mon): Rename to...
	(alt_mon): This.
	(mon): Import from CLDR (genitive case).

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-17 23:58:56 +02:00
Florian Weimer fd70af4552 Add the statx function 2018-07-10 16:14:45 +02:00
Maciej W. Rozycki 9449a295ad libc-abis: Define ABSOLUTE ABI [BZ #19818][BZ #23307]
Define a new ABSOLUTE ABI for static linker's use with EI_ABIVERSION
where correct absolute (SHN_ABS) symbol run-time load semantics is
required.  This way it can be ensured at static link time that a program
or DSO will not suffer from previous semantics where absolute symbols
were relocated by the base address, or symbols whose `st_value' is zero
silently ignored leading to a confusing "undefined symbol" error message
at load time, and instead "ELF file ABI version invalid" is printed with
old dynamic loaders, making it clear that there is an ABI version
incompatibility.

	[BZ #19818]
	[BZ #23307]
	* libc-abis (ABSOLUTE): New ABI.
	* sysdeps/unix/sysv/linux/mips/libc-abis (ABSOLUTE): New ABI.
	* NEWS: Mention the new ABI.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-05 18:06:43 +01:00
Florian Weimer d6da5cb6a8 Add renameat2 function [BZ #17662]
The implementation falls back to renameat if renameat2 is not available
in the kernel (or in the kernel headers) and the flags argument is zero.
Without kernel support, a non-zero argument returns EINVAL, not ENOSYS.
This mirrors what the kernel does for invalid renameat2 flags.
2018-07-05 19:00:10 +02:00
Florian Weimer f2873d2da0 testrun.sh: Implement --tool=strace, --tool=valgrind
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables.  This needs make 4.0
(released in 2013), so update the requirement to match.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-04 15:30:45 +02:00
Mike FABIAN b11643c21c Bug 23308: Update to Unicode 11.0.0
Unicode 11.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 11.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).

Some info about the number of characters added:

Total added characters in newly generated CHARMAP: 684
Total added characters in newly generated WIDTH: 119
alpha: Added 380 characters in new ctype which were not in old ctype
combining: Added 56 characters in new ctype which were not in old ctype
combining_level3: Added 37 characters in new ctype which were not in old ctype
graph: Added 684 characters in new ctype which were not in old ctype
lower: Added 82 characters in new ctype which were not in old ctype
print: Added 684 characters in new ctype which were not in old ctype
punct: Added 304 characters in new ctype which were not in old ctype
tolower: Added 79 characters in new ctype which were not in old ctype
totitle: Added 33 characters in new ctype which were not in old ctype
toupper: Added 79 characters in new ctype which were not in old ctype
upper: Added 79 characters in new ctype which were not in old ctype

No characters were removed.

	[BZ #23308]
	* unicode-gen/Makefile (UNICODE_VERSION): Set to 11.0.0.
	* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 11.0.0.
	* localedata/unicode-gen/EastAsianWidth.txt: likewise.
	* localedata/unicode-gen/PropList.txt: likewise.
	* localedata/unicode-gen/UnicodeData.txt: likewise.
	* localedata/charmaps/UTF-8: Regenerate.
	* localedata/locales/i18n_ctype: likewise.
	* localedata/locales/tr_TR: likewise.
	* localedata/locales/translit_circle: likewise.
	* localedata/locales/translit_cjk_compat: likewise.
	* localedata/locales/translit_combining: likewise.
	* localedata/locales/translit_compat: likewise.
	* localedata/locales/translit_font: likewise.
	* localedata/locales/translit_fraction: likewise.
2018-07-04 12:03:33 +02:00
Michael Wolf a1e0c5fa88 New locale: Lower Sorbian (dsb_DE) [BZ #23208]
[BZ #23208]
	* localedata/SUPPORTED (dsb_DE/UTF-8): New entry.
	* localedata/locales/dsb_DE: New file.
2018-06-29 23:03:06 +02:00
Rafal Luzynski 2e0c5de622 hy_AM: Add alternative month names (bug 23140).
This locale already contained correct data in mon array.  Updated from
CLDR to start the month names with the lowercase letters.

alt_mon is a new import from CLDR.  The change has been consulted
off-list with a native speaker.

	[BZ #23140]
	* localedata/locales/hy_AM (mon): Synchronize with CLDR (lowercase,
	genitive case).
	(alt_mon): New entry, import from CLDR (nominative case).
2018-06-29 22:18:24 +02:00
Zack Weinberg e69d994a63 New configure option --disable-crypt.
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API.  To facilitate this, add a configure option which disables
glibc's embedded libcrypt.  When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
2018-06-29 16:53:47 +02:00
Zack Weinberg b10a0accee Disallow use of DES encryption functions in new programs.
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards.  Demote all of them to compatibility symbols, and
remove their prototypes from installed headers.  cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.

POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.

The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi.  The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little.  It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.

DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
2018-06-29 16:53:18 +02:00
Rafal Luzynski 339124ab42 ast_ES: Add alternative month names (bug 23140).
[BZ #23140]
	* localedata/locales/ast_ES (mon): Rename to...
	(alt_mon): This.
	(mon): Import from CLDR (genitive case).
2018-06-29 12:36:53 +02:00
Adhemerval Zanella 06ab719d30 Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)
This patch fixes the OFD ("file private") locks for architectures that
support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The
issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and
F_{SET,GET}L{W}K64 expects a flock64 argument and when using old
F_OFD_* flags with a non LFS flock argument the kernel might interpret
the underlying data wrongly.  Kernel idea originally was to avoid using
such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS
semantic as default it is possible to provide the functionality and
avoid the bogus struct kernel passing by adjusting the struct manually
for the required flags.

The idea follows other LFS interfaces that provide two symbols:

  1. A new LFS fcntl64 is added on default ABI with the usual macros to
     select it for FILE_OFFSET_BITS=64.

  2. The Linux non-LFS fcntl use a stack allocated struct flock64 for
     F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided
     struct.

  3. Keep a compat symbol with old broken semantic for architectures
     that do not define __OFF_T_MATCHES_OFF64_T.

So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will
aliased to fcntl and no adjustment would be required.  So to actually
use F_OFD_* with LFS support the source must be built with LFS support
(_FILE_OFFSET_BITS=64).

Also F_OFD_SETLKW command is handled a cancellation point, as for
F_SETLKW{64}.

Checked on x86_64-linux-gnu and i686-linux-gnu.

	[BZ #20251]
	* NEWS: Mention fcntl64 addition.
	* csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel.
	* login/utmp_file.c: Likewise.
	* sysdeps/posix/fdopendir.c: Likewise.
	* sysdeps/posix/opendir.c: Likewise.
	* sysdeps/unix/pt-fcntl.c: Likewise.
	* include/fcntl.h (__libc_fcntl64, __fcntl64,
	__fcntl64_nocancel_adjusted): New prototype.
	(__fcntl_nocancel_adjusted): Remove prototype.
	* io/Makefile (routines): Add fcntl64.
	(CFLAGS-fcntl64.c): New rule.
	* io/Versions [GLIBC_2.28] (fcntl64): New symbol.
	[GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64.
	* io/fcntl.h (fcntl64): Add prototype and redirect if
	__USE_FILE_OFFSET64 is defined.
	* io/fcntl64.c: New file.
	* manual/llio.text: Add a note for which commands fcntl acts a
	cancellation point.
	* nptl/Makefile (CFLAGS-fcntl64.c): New rule.
	* sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols.
	* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64):
	New symbols.
	* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64,
	F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for
	non-LFS case.
	* sysdeps/unix/sysv/linux/fcntl64.c: New file.
	* sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename
	to __fcntl64_nocancel.
	(__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted.
	* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename
	to __fcntl64_nocancel.
	* sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file.
	* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
	* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks.
	(tests-internal): Add tst-ofdlocks-compat.
	* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
	(fcntl64): New symbol.
	* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl,
	fcntl64): Likewise.
	* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
2018-06-26 13:22:53 -03:00
Rafal Luzynski 189699ab37 csb_PL: Add alternative month names (bug 23140).
Kashubian language is not supported by CLDR, data copied from Wikipedia
and documents released by RJK (official Kashubian Language Council),
also consulted with a native speaker.

Note that this language also needs ab_alt_mon feature due to the month
May: nominative "môj", genitive "maja"; abbreviated nominative "môj",
abbreviated genitive "maj".

	[BZ #23140]
	* localedata/locales/csb_PL (mon): Rename to...
	(alt_mon): This.
	(abmon): Rename to...
	(ab_alt_mon): This.
	(mon): Add with proper genitive forms, copy from Wikipedia.
	(abmon): Likewise.
2018-06-25 12:34:31 +02:00
Carlos O'Donell 5aad5f6178 Improve DST handling (Bug 23102, Bug 21942, Bug 18018, Bug 23259).
This commit improves DST handling significantly in the following
ways: firstly is_dst () is overhauled to correctly process DST
sequences that would be accepted given the ELF gABI.  This means that
we actually now accept slightly more sequences than before.  Now we
accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or
$ORIGIN/..., but this kind of behaviour results in unexpected
and uninterpreted DST sequences being used as literal search paths
leading to security defects.  Therefore the first step in correcting
this defect is making is_dst () properly account for all DSTs
and making the function context free in the sense that it counts
DSTs without knowledge of path, or AT_SECURE.  Next, _dl_dst_count ()
is also simplified to count all DSTs regardless of context.
Then in _dl_dst_substitute () we reintroduce context-dependent
processing for such things as AT_SECURE handling.  At the level of
_dl_dst_substitute we can have access to things like the true start
of the string sequence to validate $ORIGIN-based paths rooted in
trusted directories.  Lastly, we tighten up the accepted sequences
in AT_SECURE, and avoid leaving known unexpanded DSTs, this is
noted in the NEWS entry.

Verified with a sequence of 68 tests on x86_64 that cover
non-AT_SECURE and AT_SECURE testing using a sysroot (requires root
to run).  The tests cover cases for bug 23102, bug 21942, bug 18018,
and bug 23259.  These tests are not yet appropriate for the glibc
regression testsuite, but with the upcoming test-in-container testing
framework it should be possible to include these tests upstream soon.

See the mailing list for the tests:
https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
2018-06-12 11:07:56 -04:00
Rafal Luzynski c4ad5782c4 gd_GB, hsb_DE, wa_BE: Add alternative month names (bug 23140).
As a followup of fixing bug 10871, these three languages now support two
grammatical cases of the month names.

This commit does not resolve the bug because there are more languages
to be committed.

	[BZ #23140]
	* localedata/locales/gd_GB (mon): Rename to...
	(alt_mon): This.
	(mon): Import from CLDR (genitive case).
	* localedata/locales/hsb_DE (mon): Rename to...
	(alt_mon): This.
	(mon): Import from CLDR (genitive case).
	* localedata/locales/wa_BE (mon): Rename to...
	(alt_mon): This.
	(mon): Add, fill with the proper genitive forms, but CLDR data
	is incomplete; completed according to the comments in this file.
	(d_t_fmt): Do not use "di" before the month name, no longer needed.

	* localedata/locales/wa_BE (country_name): Reword
	"Beljike" -> "Beldjike".
2018-06-12 01:33:55 +02:00
Florian Weimer 43d4f3d5ad Add references to CVE-2017-18269, CVE-2018-11236, CVE-2018-11237 2018-05-24 12:19:11 +02:00
Florian Weimer 7f9f1ecb71 Switch IDNA implementation to libidn2 [BZ #19728] [BZ #19729] [BZ #22247]
This provides an implementation of the IDNA2008 standard and fixes
CVE-2016-6261, CVE-2016-6263, CVE-2017-14062.
2018-05-23 15:27:24 +02:00
Joseph Myers 5c5c0dd747 Make llseek a compat symbol (bug 18471).
The llseek function name is an obsolete, Linux-specific, unprototyped
name for lseek64 with a link-time warning.  This patch completes the
obsoletion of this function name by making it into a compat symbol,
not available for newly linked programs and not included in the ABI
for new ports.

When a compat symbol is defined in syscalls.list, the code for that
function is not built at all for static linking unless some non-compat
symbol for that function is also defined with an explicit symbol
version, so an explicit symbol version for lseek64 is added to the
MIPS n32 syscalls.list.  The case in make-syscalls.sh that handles
such explicit non-compat symbol versions then needs to be changed to
use weak_alias instead of strong_alias when the syscall is built
outside of libc, to avoid linknamespace failures from a strong lseek64
symbol in static libpthread.

The x32 llseek.S was as far as I could tell already unused (nothing
builds an llseek.* source file, at least since the lseek / lseek64 /
llseek consolidation), so is removed in this patch as well.

Tested for x86_64 and x86, and with build-many-glibcs.py.

	[BZ #18471]
	* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak
	aliases for non-libc case of versioned symbols.
	* sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>.
	(llseek): Define as compat symbol if
	[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias
	with link warning.
	* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek):
	Make into a compat symbol, disabled for minimum symbol version
	GLIBC_2.28 and later.
	* sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
2018-05-22 15:44:01 +00:00
Joseph Myers ebc129fd17 Obsolete nfsservctl.
The Linux nfsservctl syscall was removed in Linux 3.1.  Since the
minimum kernel version for use with glibc is 3.2, the glibc wrapper
for this syscall can no longer usefully be called.  This patch makes
it into a compat symbol, not provided at all for static linking or new
ports.  (It was already the case that there was no header declaration
of this function.)

Tested for x86_64.

	* sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a
	compat symbol, disabled for minimum symbol version GLIBC_2.28 and
	later.
2018-05-18 16:50:44 +00:00
Joseph Myers 632a6cbe44 Add narrowing divide functions.
This patch adds the narrowing divide functions from TS 18661-1 to
glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64
for all configurations; f32divf64x, f32divf128, f64divf64x,
f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations
with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt.

The changes are mostly essentially the same as for the other narrowing
functions, so the description of those generally applies to this patch
as well.

Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.

	* math/Makefile (libm-narrow-fns): Add div.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing divide functions.
	* math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW.
	* math/gen-auto-libm-tests.c (test_functions): Add div.
	* math/math-narrow.h (CHECK_NARROW_DIV): New macro.
	(NARROW_DIV_ROUND_TO_ODD): Likewise.
	(NARROW_DIV_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__fdivl): New
	macro.
	(__ddivl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and
	ddiv.
	(CFLAGS-nldbl-ddiv.c): New variable.
	(CFLAGS-nldbl-fdiv.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_ddivl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl,
	ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx.
	* math/auto-libm-test-in: Add tests of div.
	* math/auto-libm-test-out-narrow-div: New generated file.
	* math/libm-test-narrow-div.inc: New file.
	* sysdeps/i386/fpu/s_f32xdivf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise.
	* sysdeps/ieee754/float128/s_f32divf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64divf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-17 00:40:52 +00:00
Joseph Myers 69a01461ee Add narrowing multiply functions.
This patch adds the narrowing multiply functions from TS 18661-1 to
glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64
for all configurations; f32mulf64x, f32mulf128, f64mulf64x,
f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations
with _Float64x and _Float128; __nldbl_dmull for ldbl-opt.

The changes are mostly essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well.  f32xmulf64 for i386 cannot use precision control as used for
add and subtract, because that would result in double rounding for
subnormal results, so that uses round-to-odd with long double
intermediate result instead.  The soft-fp support involves adding a
new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs
and outputs.

Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.

	* math/Makefile (libm-narrow-fns): Add mul.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing multiply functions.
	* math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW.
	* math/gen-auto-libm-tests.c (test_functions): Add mul.
	* math/math-narrow.h (CHECK_NARROW_MUL): New macro.
	(NARROW_MUL_ROUND_TO_ODD): Likewise.
	(NARROW_MUL_TRIVIAL): Likewise.
	* soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__fmull): New
	macro.
	(__dmull): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and
	dmul.
	(CFLAGS-nldbl-dmul.c): New variable.
	(CFLAGS-nldbl-fmul.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_dmull.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull,
	dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx.
	* math/auto-libm-test-in: Add tests of mul.
	* math/auto-libm-test-out-narrow-mul: New generated file.
	* math/libm-test-narrow-mul.inc: New file.
	* sysdeps/i386/fpu/s_f32xmulf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fmul.c: Likewise.
	* sysdeps/ieee754/float128/s_f32mulf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64mulf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_dmull.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fmul.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fmull.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-16 00:05:28 +00:00
Adhemerval Zanella cf2478d53a Deprecate ustat syscall interface
As for sysctl, ustat has been deprecated in favor of {f}statfs.  Also
some newer ports which uses generic interface builds a stub version that
returns ENOSYS.

This patch deprecates ustat interface by removing ustat.h related headers,
adding a compatibility symbol, and avoiding new ports to build and provide
the symbol.

Checked on x86_64-linux-gnu and i686-linux-gnu.  Also checked with a
check-abi on all affected ABIs.

	* NEWS: Add ustat.h deprecation entry.
	* bits/ustat.h: Remove file.
	* misc/sys/ustat.h: Likewise.
	* misc/ustat.h: Likewise.
	* sysdeps/unix/sysv/linux/generic/ustat.c: Likewise.
	* misc/Makefile (headers): Remove ustat.h and sys/ustat.h.
	* misc/ustat.c (__ustat): Rename to __old_ustat and export only in
	compatibility mode.
	* sysdeps/unix/sysv/linux/ustat.c (__ustat): Likewise.
	* sysdeps/unix/sysv/linux/mips/ustat.c: Define DEV_TO_KDEV and use
	generic Linux implementation.
2018-05-02 08:43:31 -03:00
Joseph Myers a3fb6b6bc3 Remove tilegx port.
Since tile support has been removed from the Linux kernel for 4.17,
this patch removes the (unmaintained) port to tilegx from glibc (the
tilepro support having been previously removed).  This reflects the
general principle that a glibc port needs upstream support for the
architecture in all the components it build-depends on (so binutils,
GCC and the Linux kernel, for the normal case of a port supporting the
Linux kernel but no other OS), in order to be maintainable.

Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile,
there are updates to various comments referencing tile for which
removal of those references seemed appropriate.  The configuration is
removed from README and from build-many-glibcs.py.  contrib.texi keeps
mention of removed contributions, but I updated Chris Metcalf's entry
to reflect that he also contributed the non-removed support for the
generic Linux kernel syscall interface.
__ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used
by tile.

	* sysdeps/tile: Remove.
	* sysdeps/unix/sysv/linux/tile: Likewise.
	* README (tilegx-*-linux-gnu): Remove from list of supported
	configurations.
	* manual/contrib.texi (Contributors): Mention Chris Metcalf's
	contribution of support for generic Linux kernel syscall
	interface.
	* scripts/build-many-glibcs.py (Context.add_all_configs): Remove
	tilegx configurations.
	(Config.install_linux_headers): Do not handle tile.
	* sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile
	in comment.
	* sysdeps/unix/sysv/linux/nios2/Makefile: Likewise.
	* sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise.
	[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
	conditional undefine and redefine.
	* sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile
	in comment.
	[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
	conditional undefine and redefine.
2018-04-27 19:11:24 +00:00
Zack Weinberg 18ea73adaa NEWS: Reindent and copyedit
Make the indentation of the "Deprecated and removed features" section
for 2.28 consistent with the indentation of the "Major new features"
section above.  Also, consistently refer to "stdio functions" instead
of "stdio.h functions".
2018-04-23 11:25:36 -04:00
Samuel Thibault fb03b04b7f hurd: Announce that glibc now builds unpatched
* NEWS: Announce that glibc now builds unpatched on GNU/Hurd.
	* README: Remove the mention of out-of-tree patches needed for
	GNU/Hurd.
2018-04-02 16:45:44 +02:00
Joseph Myers 8d3f9e85cf Add narrowing subtract functions.
This patch adds the narrowing subtract functions from TS 18661-1 to
glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64
for all configurations; f32subf64x, f32subf128, f64subf64x,
f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations
with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt.

The changes are essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well.

Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.

	* math/Makefile (libm-narrow-fns): Add sub.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing subtract functions.
	* math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW.
	* math/gen-auto-libm-tests.c (test_functions): Add sub.
	* math/math-narrow.h (CHECK_NARROW_SUB): New macro.
	(NARROW_SUB_ROUND_TO_ODD): Likewise.
	(NARROW_SUB_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__fsubl): New
	macro.
	(__dsubl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and
	dsub.
	(CFLAGS-nldbl-dsub.c): New variable.
	(CFLAGS-nldbl-fsub.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_dsubl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl,
	dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx.
	* math/auto-libm-test-in: Add tests of sub.
	* math/auto-libm-test-out-narrow-sub: New generated file.
	* math/libm-test-narrow-sub.inc: New file.
	* sysdeps/i386/fpu/s_f32xsubf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fsub.c: Likewise.
	* sysdeps/ieee754/float128/s_f32subf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64subf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fsub.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-20 00:34:52 +00:00
Rafal Luzynski c553cd6f7e NEWS: Mention the locale data changes (bug 22848, 22937, 22963).
Alternative (nominative/genitive) month names have been added to the
Catalan and Czech locale data and the abbreviated alternative names to
Catalan and Greek.
2018-03-16 23:04:23 +01:00
Zack Weinberg 2cc7bad0ae [BZ 1190] Make EOF sticky in stdio.
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr).  This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again.  GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.

You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input.  It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.

The test programs in this patch use a pseudoterminal to set up the
necessary conditions.  To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.

	[BZ #1190]
        [BZ #19476]
	* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
	if the _IO_EOF_SEEN bit is already set; update commentary.
	* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
	* libio/wfileops.c (_IO_wfile_underflow): Likewise.

	* support/support_openpty.c, support/tty.h: New files.
	* support/Makefile (libsupport-routines): Add support_openpty.

	* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
	New test cases.
	* libio/Makefile (tests): Add tst-fgetc-after-eof.
	* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-03-13 08:31:56 -04:00
Zack Weinberg e16deca62e [BZ #19239] Don't include sys/sysmacros.h from sys/types.h.
This completes the deprecation and removal of this inclusion, which
was begun in the 2.25 release.

	* posix/sys/types.h: Don't include sys/sysmacros.h.
	* misc/sys/sysmacros.h: Remove the conditional deprecation
	warnings for the macros defined by this header.
2018-02-12 07:34:50 -05:00
Joseph Myers d8742dd82f Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt.  As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.

Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format).  The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding).  The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files.  As previously discussed, optimized versions
for particular architectures are possible, but not included.

i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double.  (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.)  mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.

To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.

In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).

Tested for x86_64 and x86, with both GCC 6 and GCC 7.  Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7.  Tested with build-many-glibcs.py with both GCC 6 and GCC 7.

	* math/Makefile (libm-narrow-fns): Add add.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing add functions.
	* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
	* math/gen-auto-libm-tests.c (test_functions): Add add.
	* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
	(NARROW_ADD_ROUND_TO_ODD): Likewise.
	(NARROW_ADD_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__faddl): New
	macro.
	(__daddl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
	dadd.
	(CFLAGS-nldbl-dadd.c): New variable.
	(CFLAGS-nldbl-fadd.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_daddl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
	daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
	* math/auto-libm-test-in: Add tests of add.
	* math/auto-libm-test-out-narrow-add: New generated file.
	* math/libm-test-narrow-add.inc: New file.
	* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
	* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-10 02:08:43 +00:00
Zack Weinberg a4fea3f2c3 Don't install libio.h or _G_config.h.
We shipped 2.27 with libio.h and _G_config.h still installed but
issuing warnings when used.  Let's stop installing them early in 2.28
so that we have plenty of time to think of another plan if there are
problems.

The public stdio.h had a genuine dependency on libio.h for the
complete definitions of FILE and cookie_io_functions_t, and a genuine
dependency on _G_config.h for the complete definitions of fpos_t and
fpos64_t; these are moved to single-type headers.
bits/types/struct_FILE.h also provides a handful of accessor and
bitflags macros so that code is not duplicated between bits/stdio.h
and libio.h.  All the other _IO_ and _G_ names used by the public
stdio.h can be replaced with either public names or __-names.

In order to minimize the risk of breaking our own compatibility code,
bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism
exactly as it was in libio.h, but you have to define _LIBC to use it,
or it'll error out.  Similarly, _IO_lock_t_defined is preserved
exactly, but will error out if used without defining _LIBC.

Internally, include/stdio.h continues to include libio.h, and libio.h
scrupulously provides every _IO_* and _G_* name that it always did,
perhaps now defined in terms of the public names.  This is how this
patch avoids touching dozens of files throughout glibc and becoming
entangled with the _IO_MTSAFE_IO mess.  The remaining patches in this
series eliminate most of the _G_ names.

Tested on x86_64-linux; in addition to the test suite, I installed the
library in a sysroot and verified that a simple program that uses
stdio.h could be compiled against the installed library, and I also
verified that installed stripped libraries are unchanged.

	* libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h:
	New single-type headers split from _G_config.h.
	* libio/bits/types/cookie_io_functions_t.h
	* libio/bits/types/struct_FILE.h
	New single-type headers split from libio.h.

	* libio/Makefile: Install the above new headers.  Don't install
	libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or
	bits/libio-ldbl.h.
	* libio/_G_config.h, libio/libio.h: Delete file.

	* libio/bits/libio.h: Remove improper-inclusion guard.
	Include stdio.h and don't repeat anything that it does.
	Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t,
	_IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list,
	__io_read_fn as cookie_read_function_t,
	__io_write_fn as cookie_write_function_t,
	__io_seek_fn as cookie_seek_function_t,
	__io_close_fn as cookie_close_function_t,
	and _IO_cookie_io_functions_t as cookie_io_functions_t.
	Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags
	here, in the "compatibility defines" section.  Remove an #if 0
	block.  Use the "body" macros from bits/types/struct_FILE.h to
	define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked,
	and _IO_ferror_unlocked.
	Move prototypes of __uflow and __overflow...

	* libio/stdio.h: ...here.  Don't include bits/libio.h.
	Don't define _STDIO_USES_IOSTREAM.  Get __gnuc_va_list
	directly from stdarg.h.  Include bits/types/__fpos_t.h,
	bits/types/__fpos64_t.h, bits/types/struct_FILE.h,
	and, when __USE_GNU, bits/types/cookie_io_functions_t.h.
	Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t;
	__fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE;
	cookie_io_functions_t, not _IO_cookie_io_functions_t;
	__ssize_t, not _IO_ssize_t.  Unconditionally define
	BUFSIZ as 8192 and EOF as (-1).

	* libio/bits/stdio.h: Add multiple-include guard.  Use the "body"
	macros from bits/types/struct_FILE.h instead of _IO_* macros
	from libio.h; use __gnuc_va_list instead of va_list and __ssize_t
	instead of _IO_ssize_t.
	* libio/bits/stdio2.h: Similarly.

	* libio/iolibio.h: Add multiple-include guard.
	Include bits/libio.h after stdio.h.
	* libio/libioP.h: Add multiple-include guard.
	Include stdio.h and bits/libio.h before iolibio.h.

        * include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h
	* include/bits/types/cookie_io_functions_t.h
	* include/bits/types/struct_FILE.h: New wrappers.

	* bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h:
        Get definitions of _G_fpos_t and _G_fpos64_t from
        bits/types/__fpos_t.h and bits/types/__fpos64_t.h
        respectively.  Remove improper-inclusion guards.

        * conform/data/stdio.h-data: Update expectations of va_list.
	* scripts/check-installed-headers.sh: Remove special case for
        libio.h and _G_config.h.
2018-02-07 10:07:31 -05:00
Florian Weimer 71aa429b02 Record CVE-2018-6551 in NEWS and ChangeLog [BZ #22774] 2018-02-06 09:19:13 +01:00
Zack Weinberg 26c07172cd Remove getc and putc macros from the public stdio.h.
The getc and putc macros in the public stdio.h expand to call _IO_getc
and _IO_putc respectively.  As _IO_getc, fgetc, and getc are all aliases
for the same function, and _IO_putc, fputc, and putc are also all aliases
for the same function, the macros are pointless.  The C standard does
not require getc and putc to be macros, so let's just not have macros.
All four symbols are exported from libc.so at the same, ancient symbol
version, so there should be no risks for binary compatibility.  Similarly,
the getchar and putchar inlines in bits/stdio.h forward to getc and putc
instead of their _IO_ aliases.

As a change from longstanding historical practice, this does seem
like it might break _something_, so there is a note in NEWS, which
is also a convenient place to advise people that if they thought getc
and putc had reduced per-character overhead they should consider using
getc_unlocked and putc_unlocked instead.  (These are also not macros,
but when optimizing, they are inlines.)

	* libio/stdio.h: Don't define getc or putc as macros.
	* libio/bits/stdio.h (getchar, putchar): Use getc and putc,
	not _IO_getc and _IO_putc.
2018-02-05 19:59:03 -05:00
Dmitry V. Levin 086ee48eae Open master branch for glibc 2.28 development 2018-02-01 17:18:19 +00:00
Dmitry V. Levin 242cbc9047 NEWS: add the list of bugs fixed in 2.27 2018-02-01 16:17:18 +00:00