When configured as --enable-stack-protector=all glibc
inserts stack checking canary into every function
including __sigsetjmp_aux(). Stack checking code
ends up using s0 register to temporary hold address
of global canary value.
Unfortunately __sigsetjmp_aux assumes no caller' caller-save
registers should be clobbered as it stores them as-is.
The fix is to disable stack protection of __sigsetjmp_aux.
Tested on the following test:
#include <setjmp.h>
#include <stdio.h>
int main() {
jmp_buf jb;
volatile register long s0 asm ("$s0");
s0 = 1234;
if (setjmp(jb) == 0)
longjmp(jb, 1);
printf ("$s0 = %lu\n", s0);
}
Without the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1082346228
With the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1234
[BZ #22624]
* sysdeps/mips/mips64/setjmp_aux.c (__sigsetjmp_aux): Use
inhibit_stack_protector.
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch regenerates MIPS catan and catanh ulps for long double with
fixed expected results for the tests of those functions. ulps for
other types (which may see variation depending on whether glibc is
built for a processor with fused multiply-add support) are
deliberately not reduced. ulps are not regenerated for powerpc-nofpu
as such regeneration does not result in any changes for long double.
* sysdeps/mips/mips64/libm-test-ulps: Update catan and catanh ulps
for long double with corrected test expectations.
This corresponds to a patch applied to libgcc. In glibc it doesn't
actually affect much (only fma, I think).
The MIPS sfp-machine.h files have an _FP_CHOOSENAN implementation
which emulates hardware semantics of not preserving signaling NaN
payloads for an operation with two NaN arguments (although that
doesn't suffice to avoid sNaN payload preservation in any case with
just one NaN argument).
However, those are only hardware semantics in the legacy NaN case; in
the NAN2008 case, the architecture documentation says hardware
preserves payloads in such cases. Furthermore, this implementation
assumes legacy NaN semantics, so in the NAN2008 case the
implementation actually has the effect of preserving sNaN payloads but
not preserving qNaN payloads, when both should be preserved.
This patch fixes the code just to copy from the first argument.
Tested for mips64 soft-float.
* sysdeps/mips/mips32/sfp-machine.h (_FP_CHOOSENAN): Always
preserve NaN payload if [__mips_nan2008].
* sysdeps/mips/mips64/sfp-machine.h (_FP_CHOOSENAN): Likewise.
In a microMIPS compilation of `.init' code use the R_MICROMIPS_JALR
relocation intended for PIC call relaxation in microMIPS code rather
than the corresponding R_MIPS_JALR relocation meant for regular MIPS
code only.
* sysdeps/mips/mips32/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
* sysdeps/mips/mips64/n32/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
* sysdeps/mips/mips64/n64/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
Avoid a build error with microMIPS compilation and recent versions of
GAS which complain if a branch targets a label which is marked as data
rather than microMIPS code:
../sysdeps/mips/mips32/crti.S: Assembler messages:
../sysdeps/mips/mips32/crti.S:72: Error: branch to a symbol in another ISA mode
make[2]: *** [.../csu/crti.o] Error 1
as commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of
branch and jump targets") closed a hole in branch processing, making
relocation calculation respect the ISA mode of the symbol referred.
This allowed diagnosing the situation where an attempt is made to pass
control from code assembled for one ISA mode to code assembled for a
different ISA mode and either relaxing the branch to a cross-mode jump
or if that is not possible, then reporting this as an error rather than
letting such code build and then fail unpredictably at the run time.
This however requires the correct annotation of branch targets as code,
because the ISA mode is not relevant for data symbols and is therefore
not recorded for them. The `.insn' pseudo-op is used for this purpose
and has been supported by GAS since:
Wed Feb 12 14:36:29 1997 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (mips_pseudo_table): Add "insn".
(s_insn): New static function.
* doc/c-mips.texi: Document .insn.
so there has been no reason to avoid it where required. More recently
this pseudo-op has been documented, by the microMIPS architecture
specification[1][2], as required for the correct interpretation of any
code label which is not followed by an actual instruction in an assembly
source.
Use it in our crti.S files then, to mark that the trailing label there
with no instructions following is indeed not a code bug and the branch
is legitimate.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
2016-11-18 Matthew Fortune <Matthew.Fortune@imgtec.com>
Maciej W. Rozycki <macro@imgtec.com>
* sysdeps/mips/mips32/crti.S (_init): Add `.insn' pseudo-op at
`.Lno_weak_fn' label.
* sysdeps/mips/mips64/n32/crti.S (_init): Likewise.
* sysdeps/mips/mips64/n64/crti.S (_init): Likewise.
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
On running tests after from-scratch ulps regeneration, I found that
some libm tests failed with ulps in excess of those recorded in the
from-scratch regeneration, which should never happen unless those ulps
exceed the limit on ulps that can go in libm-test-ulps files.
Failure: Test: atan2_upward (inf, -inf)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `atan2_upward'
is : 2 ulp
accepted: 1 ulp
Failure: Test: carg_upward (-inf + inf i)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `carg_upward'
is : 2 ulp
accepted: 1 ulp
The problem comes from the addition of tests for the finite-math-only
versions of libm functions. Those tests share ulps with the default
function variants. make regen-ulps runs the default tests before the
finite-math-only tests, concatenating the resulting ulps before
feeding them to gen-libm-test.pl to generate a new libm-test-ulps
file. But gen-libm-test.pl always takes the last ulps value given for
any (function, type) pair. So, if the largest ulps for a function
come from non-finite inputs, a from-scratch regeneration loses those
ulps.
This patch fixes gen-libm-test.pl, in the case where there are
multiple ulps values for a (function, type) pair - which can only
happen as part of a regeneration - to take the largest ulps value
rather than the last one.
Tested for ARM / MIPS / powerpc-nofpu.
* math/gen-libm-test.pl (parse_ulps): Do not reduce
already-recorded ulps.
* sysdeps/arm/libm-test-ulps: Regenerated.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
This patch enables use of sysdeps/ieee754/dbl-64/wordsize-64 for
MIPS64 (both n64 and n32), removing a #error in one case now that case
has been tested and found to work.
Tested for mips64 (n64 and n32).
* sysdeps/mips/mips64/Implies: Use ieee754/dbl-64/wordsize-64.
* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c
(__issignaling) [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Remove #error.
This patch adds more libm test inputs found through random test
generation to increase previously known ulps. This particular test
generation was run for mips64, so most of the increased ulps are for
ldbl-128 (float and double having been fairly well covered by such
testing for x86_64), but there's the odd ulps increase for other
formats.
Tested for x86_64, x86 and mips64.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, carg, cos, csqrt, erfc, exp,
exp10, exp2, log, log1p, log2, pow, sin, sincos, sinh, tan and
tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
As noted in
<https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>, soft-fp
sysdeps subdirectories (and more generally, subdirectories where
sysdeps/foo/Implies contains foo/bar) are unnecessary and should be
eliminated. This patch does so for MIPS.
Tested for MIPS64 (all three ABIs, soft-float) that installed stripped
shared libraries are unchanged by this patch.
* sysdeps/mips/soft-fp/sfp-machine.h: Move to ....
* sysdeps/mips/mips32/sfp-machine.h: ... here.
* sysdeps/mips/mips64/soft-fp/Makefile: Move to ....
* sysdeps/mips/mips64/Makefile: ... here.
* sysdeps/mips/mips64/soft-fp/e_sqrtl.c: Move to ....
* sysdeps/mips/mips64/e_sqrtl.c: ... here.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h: Move to ....
* sysdeps/mips/mips64/sfp-machine.h: ... here.
* sysdeps/mips/mips32/Implies: Remove mips/soft-fp.
* sysdeps/mips/mips64/n32/Implies: Remove mips/mips64/soft-fp.
* sysdeps/mips/mips64/n64/Implies: Likewise.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
GCC trunk now uses soft-fp for MIPS64 long double, so supporting
integration with hardware exceptions and rounding modes. This patch
updates MIPS math-tests.h accordingly not to disable exception and
rounding mode tests in this case.
Tested mips64 and ulps updated to reflect the newly run tests.
* sysdeps/mips/math-tests.h: Include <features.h>.
[!__mips_soft_float && _MIPS_SIM != _ABIO32 && __GNUC_PREREQ (4, 9)]
(ROUNDING_TESTS_long_double): Do not define.
[!__mips_soft_float && _MIPS_SIM != _ABIO32 && __GNUC_PREREQ (4, 9)]
(EXCEPTION_TESTS_long_double): Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Update.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
I've moved the MIPS port from ports to the main sysdeps hierarchy.
Beyond the README update, the move of the files was simply
git mv ports/sysdeps/mips sysdeps/mips
git mv ports/sysdeps/unix/mips sysdeps/unix/mips
git mv ports/sysdeps/unix/sysv/linux/mips sysdeps/unix/sysv/linux/mips
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.mips similar to those in other files.
Tested that disassembly of installed shared libraries for mips is the
same before and after this patch (except for ld.so where paths in
assertions are involved, as for arm).
* sysdeps/mips: Move directory from ports/sysdeps/mips.
* sysdeps/unix/mips: Move directory from ports/sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory from
ports/sysdeps/unix/sysv/linux/mips.
* README: Update listing for mips-*-linux-gnu and
mips64-*-linux-gnu.
* sysdeps/mips: Move directory to ../sysdeps/mips.
* sysdeps/unix/mips: Move directory to ../sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory to
../sysdeps/unix/sysv/linux/mips.
* sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
Sort by syscalls. Make sure we get headers such as sgidefs.h from
the build tree before just-installed ones.
* sysdeps/mips/atomicity.h, sysdeps/mips/dl-machine.h,
sysdeps/mips/machine-gmon.h, sysdeps/mips/bits/setjmp.h,
sysdeps/mips/fpu/bits/mathdef.h,
sysdeps/mips/mips64/__longjmp.c,
sysdeps/mips/mips64/setjmp_aux.c,
sysdeps/unix/sysv/linux/mips/kernel_stat.h,
sysdeps/unix/sysv/linux/mips/pread.c,
sysdeps/unix/sysv/linux/mips/pread64.c,
sysdeps/unix/sysv/linux/mips/ptrace.c,
sysdeps/unix/sysv/linux/mips/pwrite.c,
sysdeps/unix/sysv/linux/mips/pwrite64.c,
sysdeps/unix/sysv/linux/mips/sigaction.c,
sysdeps/unix/sysv/linux/mips/sigcontextinfo.h,
sysdeps/unix/sysv/linux/mips/bits/fcntl.h,
sysdeps/unix/sysv/linux/mips/bits/sigcontext.h,
sysdeps/unix/sysv/linux/mips/bits/stat.h,
sysdeps/unix/sysv/linux/mips/sys/procfs.h,
sysdeps/unix/sysv/linux/mips/sys/ptrace.h,
sysdeps/unix/sysv/linux/mips/sys/tas.h,
sysdeps/unix/sysv/linux/mips/sys/ucontext.h,
sysdeps/unix/sysv/linux/mips/sys/user.h: Use standard names
for ABI macros, include sgidefs.h where appropriate.
sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
Likewise.
sysdeps/unix/sysv/linux/mips/configure.in (asm-unistd.h):
Likewise.
sysdeps/unix/sysv/linux/mips/configure: Rebuilt.
2003-04-08 Alexandre Oliva <aoliva@redhat.com>
* sysdeps/mips/sys/regdef.h (t4,t5,t6,t7): Renamed to t0..t3 on
NewABI.
(ta0, ta1, ta2, ta3): Defined to t4..t7 on o32, and a4..a7 on
NewABI.
* sysdeps/mips/mips64/memcpy.S: Adjust register naming
conventions.
* sysdeps/mips/mips64/memset.S: Likewise.
* sysdeps/unix/mips/sysdep.S (__syscall_error) [_LIBC_REENTRANT]:
Use t0 instead of t4 as temporary.
2003-03-20 Alexandre Oliva <aoliva@redhat.com>
* sysdeps/mips/bits/setjmp.h: Store all N32 and N64 registers,
including pc, gp, sp and fp, as long long.
* sysdeps/mips/mips64/setjmp.S: Pass gp to __sigsetjmp_aux.
* sysdeps/mips/mips64/setjmp_aux.c: Adjust type of arguments.
Add gp argument, and set gp in the jmpbuf to it.
* sysdeps/mips/setjmp_aux.c: Revert to o32-only.
* sysdeps/mips/mips64/Implies: Move wordsize-64 to...
* sysdeps/mips/mips64/n64/Implies: New file.
* sysdeps/mips/mips64/n64/Makefile: New file.
* sysdeps/mips/mips64/n64/el/bits/endian.h: New file.
* sysdeps/mips/mips64/n32/Implies: New file.
* sysdeps/mips/mips64/n32/Makefile: New file.
* sysdeps/mips/mips64/n32/el/bits/endian.h: New file.
* sysdeps/unix/mips/mips64/n32/sysdep.h: New file.
* sysdeps/unix/mips/mips64/n64/sysdep.h: New file.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: New file.
* sysdeps/unix/sysv/linux/mips/mips64/n64/glob64.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: New file.
* sysdeps/unix/sysv/linux/mips/mips64/ldconfig.h: New file.
* sysdeps/unix/sysv/linux/mips/mips64/llseek.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/recv.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/send.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/syscall.S: New file.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: New file.
* sysdeps/unix/sysv/linux/mips/mips64/umount.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S: New file.
* sysdeps/mips/dl-machine.h: Include sys/asm.h.
(elf_machine_matches_host): Prevent linking of o32 and n32
together.
(elf_machine_dynamic): Document assumption on $gp.
(STRINGXP, STRINGXV, STRINGV_): New macros.
(elf_machine_load_address): Use them to stringize PTR_LA and
PTR_SUBU.
(ELF_DL_FRAME_SIZE, ELF_DL_SAVE_ARG_REGS,
ELF_DL_RESTORE_ARG_REGS, IFABIO32): New macros used in...
(_dl_runtime_resolve): Adjust it for all 3 ABIs.
(__dl_runtime_resolve): Cast the symtab initializer to the
right type.
(RTLD_START): Use it. Adjust it for all 3 ABIs.
(elf_machine_rel): Mark as always_inline in RTLD_BOOTSTRAP.
Handle 64-bit R_MIPS_REL composite relocation and accept
R_MIPS_64 relocations to shift addend size to 64 bits.
Document assumption regarding local GOT entries. Document
backward-compatibility departing from the ABI behavior in
applying relocations that reference section symbols, no longer
used. Support relocations to mis-aligned offsets.
* sysdeps/mips/mips64/dl-machine.h: Deleted, obsolete.
Joseph Myers
Sergei Trofimovich
Maciej W. Rozycki
Steve Ellcey
Roland McGrath
Ulrich Drepper
Jakub Jelinek
Andreas Jaeger
Alexandre Oliva