Whenever getaddrinfo needed network interface information it used the
netlink interface to read the information every single time. The
problem is that this information can change at any time.
The patch implements monitoring of the network interfaces through
nscd. If no change is detected the previously read information can
be reused (which is the norm). This timestamp information is also
made available to other processes using the shared memory segment
between nscd and those processes.
The nscd database mapped in processes can change at any time. We
have to be more vigilant when it comes to using that memory. Test
the data entries are valid in their entire size, don't read data
again from memory once we verified it, and make sure the trailing
pointer is not going off the deep end.
* nscd/nscd_getai.c (__nscd_getai): Set errno to 0 in case we found
no entry.
* nscd/nscd_getgr.c (nscd_getgr_r): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Likewise.
* nscd/nscd_getserv_r.c (nscd_getserv_r): Likewise.
from return value.
* nscd/nscd_helper.c: Include string.h.
(__nscd_cache_search): Remove const qualifier from return value.
On strict alignment architectures check hash entry and data head
alignment.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Don't crash or fail because
mmapped data during GC cycle contains garbage. If
__nscd_drop_map_ref fails, decrement mapped->counter when returning
error or if retrying with NO_MAPPING, only __nscd_unmap if counter
dropped to 0.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/nscd_initgroups.c (__nscd_getgrouplist): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getai.c (__nscd_getai): Likewise.
* nscd/nscd_getserv_r.c (nscd_getserv_r): Likewise.
2007-01-31 Jakub Jelinek <jakub@redhat.com>
* nscd/nscd-client.h (__nscd_cache_search): Remove const qualifier
from return value.
* nscd/nscd_helper.c: Include string.h.
(__nscd_cache_search): Remove const qualifier from return value.
On strict alignment architectures check hash entry and data head
alignment.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Don't crash or fail because
mmapped data during GC cycle contains garbage. If
__nscd_drop_map_ref fails, decrement mapped->counter when returning
error or if retrying with NO_MAPPING, only __nscd_unmap if counter
dropped to 0.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/nscd_initgroups.c (__nscd_getgrouplist): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getai.c (__nscd_getai): Likewise.
* nscd/nscd_getserv_r.c (nscd_getserv_r): Likewise.
* nscd/nscd_initgroups.c: Mark __gr_map_handle as hidden.
* nscd/nscd_getgr_r.c: Likewise.
* include/rpc/pmap_rmt.h: Mark all functions as hidden.
* nscd/nscd_getai.c (__hst_map_handle): Mark as hidden.
* nscd/nscd_gethst_r.c (__hst_map_handle): Likewise.
* stdlib/longlong.h (__clz_tab): Mark as hidden.
* iconv/gconv_int.h: Mark __gconv_lock as hidden.
NETDB_INTERNAL if buffer is too small.
* nscd/hstcache.c (INCR): Remove.
(addhstbyX): Double buflen in each iteration rather than add INCR.
* nscd/grpcache.c: Likewise.
* nscd/pwdcache.c: Likewise.
* nscd/nscd-client.h (libc_locked_map_ptr): Add new first
parameter, used as class for definition.
* nscd/nscd_getpw_r.c: Adjust for libc_locked_map_ptr change.
(pw_map_free): Ensure no crash after memory is freed.
* nscd/nscd_getgr.c: Likewise. Make map externally visible.
* nscd/nscd_gethst.c: Likewise.
* nscd/nscd_getai.c: Use map from nscd_gethost.c.
* nscd/nscd_initgroups.c: Use map from nscd_getgr.c.
* nscd/nscd.c (termination_handler): Reset timestamp so that
client immediately stop using the database.
(__nscd_drop_map_ref): Change second parameter to be a reference to
* nscd/nscd.h: Add declaration of addinitgroups and
2004-09-30 Ulrich Drepper <drepper@redhat.com>
* nscd/nscd-client.h (__nscd_get_map_ref): Drop volatile from last
parameter.
(__nscd_drop_map_ref): Change second parameter to be a referenc to
a variable. Update variable when cycle count changed.
* nscd/nscd_helper.c (__nscd_get_map_ref): Remove volatile here, too.
* nscd/nscd_getai.c: Correctly use __nscd_drop_map_ref. Reinitialize
all variables and avoid memory leak in case of retries.
* nscd/nscd_getgr_r.c: Likewise.
* nscd/nscd_gethst_r.c: Likewise.
* nscd/nscd_getpw_r.c: Likewise.
* nscd/nscd_initgroups.c: Likewise.
* nscd/nscd.h: Add declaretion of addinitgroups and
readdinitgroups.
* nscd/connections.c: Implement r/o sharing of nscd's cache with client
processes via shared memory.
* nscd/nscd-client.h: Likewise.
* nscd/nscd.h: Likewise.
* nscd/nscd_conf.c: Likewise.
* nscd/nscd_getgr_r.c: Likewise.
* nscd/nscd_getpw_r.c: Likewise.
* nscd/nscd_gethst_r.c: Likewise.
* nscd/nscd.conf: Add new config parameters.
* nscd/Makefile (aux): Add nscd_helper.
* nscd/nscd_helper.c: New file.
* nscd/mem.c (gc): Indicate beginning and end of the gc cycle.
* nscd/hstcache.c: Simplify a lot. We cache only the request itself,
no derived information.
* connections.c (nscd_init): Fix bug in testing size of the persistent.
* nis/Makefile (aux): Add nis_hash.
* nis/nis_hash.c: New file. Split out from nis_util.c.
* nis/nis_util.c: Move __nis_hash code in separate file.
* csu/tst-atomic.c: Improve atomic_increment_val test which would
not have found a ppc bug.
2004-06-04 Ulrich Drepper <drepper@redhat.com>
* nscd/nscd_gethst_r.c (nscd_gethst_r): Use __nss_not_use_nscd_hosts
in all places, not __nss_not_use_nscd_group.
Reported by Philippe Gregoire.
2004-02-26 Ulrich Drepper <drepper@redhat.com>
* nss/getXXbyYY_r.c: Pass result also to the nscd_* function. Don't
set *result here.
* nscd/nscd_proto.h: Add new argument for pointer to result pointer
to all nscd_* functions.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Add new parameter. Store result
pointer in the address provided by the new parameter if successful.
Otherwise store NULL. Return zero if no entry found.
(__nscd_getgrnam_r, __nscd_getgrgid_r): Add new parameter and pass
it on.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Add new parameter. Store
result pointer in the address provided by the new parameter if
successful. Otherwise store NULL. Return zero if no entry found.
(__nscd_gethostbyname_r, __nscd_gethostbyname2_r,
__nscd_gethostbyaddr_r): Add new parameter and pass it on.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Add new parameter. Store result
pointer in the address provided by the new parameter if successful.
Otherwise store NULL. Return zero if no entry found.
(__nscd_getpwnam_r, __nscd_getpwuid_r): Add new parameter and pass
it on.
2003-04-22 Ulrich Drepper <drepper@redhat.com>
* nscd/nscd-client.h: Add declaration for __nscd_open_socket.
* nscd/nscd_gethst_r.c (__nscd_open_socket): Renamed from
open_socket. Not static anymore.
(nscd_gethst_r): Use __nscd_open_socket.
* nscd/nscd_getgr_r.c (open_socket): Removed.
(nscd_getgr_r): Use __nscd_open_socket.
* nscd/nscd_getpw_r.c (open_socket): Removed.
(nscd_getpw_r): Use __nscd_open_socket.
* nscd/nscd.c (main): Change type of fdn to long int and use strtol.
* nscd/connections.c (handle_request): Add cast to avoid warning.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Consolidate writing of the
request with one writev call. Protect all read calls with
TEMP_FAILURE_RETRY.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/hstcache.c: Use extend_alloca to reallocate alloca'd buffer.
Protect writev calls with TEMP_FAILURE_RETRY.
* nscd/grpcache.c: Likewise.
* nscd/pwdcache.c: Likewise.
(libc: GLIBC_2.0) [USE_TLS && HAVE___THREAD]: Remove _errno, errno.
(libc: GLIBC_2.3) [USE_TLS && HAVE___THREAD]: Put errno here instead.
* resolv/Versions: Use %include <tls.h> to get USE_TLS defined.
(libc: GLIBC_2.0) [USE_TLS && HAVE___THREAD]: Remove _h_errno, h_errno,
and _res.
(libc: GLIBC_2.3) [USE_TLS && HAVE___THREAD]: Put h_errno, _res here.
* elf/tls-macros.h [__x86_64__] (TLS_LE, TLS_IE, TLS_LD, TLS_GD):
New macros for x86-64.
* sysdeps/unix/sysv/linux/alpha/bits/time.h: File removed.
It was indentical to the linux/bits/time.h file.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Add a cast to silence warning.
* resolv/gethnamaddr.c (gethostbyaddr): Use socklen_t for SIZE.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2000-09-29 David Mosberger <davidm@hpl.hp.com>
* sysdeps/unix/sysv/linux/ia64/sysdep.S (__ia64_syscall): Cleanup.
* sysdeps/unix/sysv/linux/ia64/sysdep.h (CALL_MCOUNT): Implement.
2000-06-10 David Mosberger <davidm@hpl.hp.com>
* sysdeps/unix/sysv/linux/ia64/setjmp.S: Fix it so it actually
works: call to __sigjmp_save must be done unconditionally to
ensure jmp_buf is initialized properly.
2000-09-27 Andreas Jaeger <aj@suse.de>
* sysdeps/unix/sysv/linux/i386/bits/fcntl.h: Synch with Linux
2.4.0-test9-pre7.
2000-09-29 Jakub Jelinek <jakub@redhat.com>
* nscd/nscd-client.h (NSCD_VERSION): Bump to 3.
Use int32_t where appropriate.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Use uint32_t instead of size_t
where appropriate.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/hstcache.c (cache_addhst): Likewise.
* nscd/grpcache.c (cache_addgr): Likewise.
1999-07-09 Cristian Gafton <gafton@redhat.com>
* nscd/nscd_gethst_r.c (nscd_gethst_r): Make sure
resultbuf->h_addr_list addresses are correctly aligned.
* sysdeps/i386/bits/string.h (__memcpy_c): Help some stupid old
compilers.
(__memset_cc): Likewise.
* nss/getXXbyYY_r.c: Return error code not -1.
* nss/getXXent_r.c: Likewise.
* nss/getXXbyYY.c: Expect return alue to be ERANGE if buffer is too
small.
* nscd/nscd_getgr_r.c: Return -1 in case nscd is not available and
value > 0 for error.
* nscd/nscd_gethst_r.c: Likewise.
* nscd/nscd_getpw_r.c: Likewise.
1999-06-17 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/bits/ioctl-types.h: Add missing line
disciplines.
1999-06-14 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* nscd/nscd_nischeck.c: Fix typos.
1999-06-17 Ulrich Drepper <drepper@cygnus.com>
1999-03-13 Mark Kettenis <kettenis@gnu.org>
* sysdeps/unix/bsd/getpt.c (__getpt): Do not use `isatty' to check
if the opened master pty really is a pty. `isatty' checks for
tty-ness and a pty is not a tty. Return ENOENT instead of ENFILE
if we are out of pty's.
1999-03-13 Mark Kettenis <kettenis@gnu.org>
* sysdeps/generic/utmp_file.c (setutent_file): Make sure the just
opened file is closed on exec.
* login/utmp_daemon.c (setutent_daemon): Likewise for the just
opened socket.
1999-03-13 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/llio.texi (File Position Primitive): Reformat @end
command. Patch by Bruno Haible <haible@ilog.fr> [PR libc/1020].
* nscd/nscd_getpw_r.c (nscd_getpw_r): Set `errno' correctly if no
entry is found.
* nscd/nscd_getgr_r.c (nscd_getgr_r): Likewise.
* nscd/nscd_gethst_r.c (nscd_gethst_r): Likewise.
* nscd/nscd_getpw_r.c (nscd_getpw_r): Mark as internal and take
extra argument with length of key string.
(__nscd_getpwnam_r): Call nscd_getpw_r with extra argument.
(__nscd_getpwuid_r): Create key string on stack.
* nscd/nscd_getgr_r.c: Mark local functions as internal.
* nscd/nscd_gethst_r.c: Likewise.
1999-01-11 Ulrich Drepper <drepper@cygnus.com>
* ctype/Versions [GLIBC_2.0]: Export __ctype32_b.
* include/wctype.h: Declare __iswctype.
* stdio-common/vfscanf.c (__vfscanf): Use __iswspace instead of
iswspace.
* wctype/Makefile (routines): Add wcextra_l.
* wctype/wcextra.c (iswblank): Implement function here and don't use
__iswctype.
(__iswblank_l): Move definition to...
* wctype/wcextra_l.c: ...here. New file.
* wctype/wcfuncs.c: Really implement functions and don't call
__iswctype or __towctrans.
* wctype/wctype.h: Change isw* and tow* macros. Don't call
__iswctype or __towctrans. Instead optimize constant argument case.
* iconv/gconv.h: Fix typos.
* iconv/skeleton.c: Fix typos. Optimize init function a bit.
Correctly emit escape sequence to return to initial state in
conversion function.
* iconvdata/iso-2022-jp.c (gconv_init): Correctly initialize
max_needed_to element.
* manual/mbyte.texi: Removed. This is now described in charset.texi.
* manual/charset.texi: New file.
* manual/Makefile (chapters): Replace mbyte by charset.
* manual/ctype.texi: Document wide character functions.
* manual/intro.texi: Fix reference to mbyte chapter.
* manual/lang.texi: Likewise.
* manual/locale.texi: Likewise.
* manual/stdio.texi: Likewise.
* manual/string.texi: Fix @node line for new charset chapter.
* manual/libc.texinfo (UPDATED): Updated. Also update copyright years.
* manual/memory.texi (savestring): Optimize code to give a good
example.
* manual/filesys.texi: Fix wording. Patches by Jim Meyering.
* nscd/nscd_getgr_r.c: Include stdint.h to get uintptr_t definition.
* nscd/nscd_getpw_r.c: Likewise.
* nscd/nscd_gethst_r.c: Likewise.
* stdlib/stdtold_l.c: Always include xlocale.h.
1999-01-11 Geoffrey Keating <geoffk@ozemail.com.au>
* stdlib/fpioconst.h (LDBL_MAX_10_EXP_LOG): Define to be same as
DBL_MAX_10_EXP_LOG if there is no long double.
(_fpioconst_pow10): Always use size as LDBL_MAX_10_EXP_LOG to match
printf_fp.c.
1999-01-10 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* timezone/Makefile ($(testdata)/GB): Changed to ...
($(testdata)/Europe/London): ... for tst-timezone test.
($(objpfx)tst-timezone.out): Change GB to Europe/London.
* timezone/tst-timezone.c (main): Enable DST switching test,
change GB to Europe/London.
1999-01-10 Philip Blundell <philb@gnu.org>
* socket/Makefile (headers): Remove bits/sockunion.h.
1999-01-09 Philip Blundell <philb@gnu.org>
* socket/sys/socket.h: Don't include <bits/sockunion.h>.
* sysdeps/generic/bits/sockunion.h: Deleted.
* sysdeps/unix/sysv/linux/bits/sockunion.h: Likewise.
1999-01-08 H.J. Lu <hjl@gnu.org>
* io/fts.c (fts_close): Don't access memory after having it freed.
* nscd/nscd-client.h: New file, broken out of "nscd.h".
* nscd/nscd.h: Move defns needed by clients to "nscd-client.h",
and #include that.
* nscd/Makefile (distribute): Add nscd-client.h.
* nscd/nscd_getgr_r.c, nscd/nscd_gethst_r.c, nscd/nscd_getpw_r.c:
Include "nscd-client.h" instead of "nscd.h"
1998-10-18 Ulrich Drepper <drepper@cygnus.com>
* resolv/nss_dns/dns-host.c: Add missing errnop parameter to the
NSS functions.
* resolv/nss_dns/dns-network.c: Likewise.
* grp/Makefile: Don't search for linuxhtreads in add-ons, use
have-thread-library to determine whether threads are available.
* pwd/Makefile: Remove wrong comment.
* inet/Makefile: Define CFLAGS-gethstbyad_r.c, CFLAGS-gethstbynm_r.c,
and CFLAGS-gethstbynm2_r.c to -DUSE_NSCD=1.
* locale/C-messages.c: Define default strings for YESTR and NOSTR.
* nss/Versions: Add __nss_hosts_lookup.
* nss/getXXbyYY.c: Remove unneeded assignment.
* nss/getXXbyYY_r.c: Include nscd/nscd_proto.h only if needed.
Almost complete rewrite of the NSCD to make it smaller, faster,
add more functionnality and make it easier to extend.
* nscd/Makfile (routines): Add nscd_gethst_r.
(nscd-modules): Add hstcache, gethstbyad_r, gethstbynm2_r, and cache.
* nscd/cache.c: New file.
* nscd/gethstbyad_r.c: New file.
* nscd/gethstbynm2_r.c: New file.
* nscd/hstcache.c: New file.
* nscd/nscd_gethst_r.c: New file.
* nscd/connections.c: Rewritten. Don't start new thread for every
new connection. Use a fixed set of threads which handle all
connections and also the cache cleanup.
* nscd/grpcache.c: Rewritten to use generic cache handling functions
in cache.c.
* nscd/nscd.c: Recognize new parameter nthreads. Adjust initialization
for rewrite. Remove handle_requests function.
* nscd/nscd.h (NSCD_VERSION): Bump to 2.
Define new data structure for the new unified cache and the host
database entries.
* nscd/nscd_conf.c: Rewrite parsing partly to allow adding of more
databases easily. Recognize check-files and threads definitions.
* nscd/nscd.conf: Add definition of enable-cache and check-files to
passwd and group definitions. Add new set of definitions for hosts.
* nscd/nscd_getgr_r.c: Rewrite for new protocol.
* nscd/nscd_getpw_r.c: Likewise.
* nscd/nscd_proto.h: Add prototype for host database functions.
* nscd/nscd_stat.c: Rewrite to simplify printing of information
for many databases.
* nscd/dbg_log.c: Remove unnecessary variable initializations.
Global variable debug_flag is renamed to dbg_level.
* nscd/dbg_log.h: Declare set_logfile.
Ryan S. Arnold