OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/include/scsi/scsi_eh.h

96 lines
2.7 KiB
C
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#ifndef _SCSI_SCSI_EH_H
#define _SCSI_SCSI_EH_H
[SCSI] include linux/scatterlist.h in scsi_eh.h Spotted by Paul Jackson <pj@sgi.com> The error handler rework moved the scatterlist into a globally exposed structure in scsi_eh.h; unfortunately, the scatterlist include needs to move from scsi_error.c to scsi_eh.h to allow this to compile universally. Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-16 03:07:17 +02:00
#include <linux/scatterlist.h>
[SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE - Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals. void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *sesci, unsigned char *cmnd, int cmnd_size, int sense_bytes) Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save structure. void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *sesci); Will undo any changes done to a command by above function. Making it ready for completion. - Re-factor scsi_send_eh_cmnd() to use above APIs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-08 16:36:45 +02:00
#include <scsi/scsi_cmnd.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
struct scsi_device;
struct Scsi_Host;
/*
* This is a slightly modified SCSI sense "descriptor" format header.
* The addition is to allow the 0x70 and 0x71 response codes. The idea
* is to place the salient data from either "fixed" or "descriptor" sense
* format into one structure to ease application processing.
*
* The original sense buffer should be kept around for those cases
* in which more information is required (e.g. the LBA of a MEDIUM ERROR).
*/
struct scsi_sense_hdr { /* See SPC-3 section 4.5 */
u8 response_code; /* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
u8 sense_key;
u8 asc;
u8 ascq;
u8 byte4;
u8 byte5;
u8 byte6;
u8 additional_length; /* always 0 for fixed sense format */
};
[SCSI] convert SPI transport class to scsi_execute This one's slightly more difficult. The transport class uses REQ_FAILFAST, so another interface (scsi_execute) had to be invented to take the extra flag. Also, the sense functions are shifted around to allow spi_execute to place data directly into a struct scsi_sense_hdr. With this change, there's probably a lot of unnecessary sense buffer allocation going on which we can fix later. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 18:31:14 +02:00
static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr)
{
if (!sshdr)
return 0;
return (sshdr->response_code & 0x70) == 0x70;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[PATCH] SCSI: export scsi_eh_finish_cmd() and scsi_eh_flush_done_q() Export two SCSI EH command handling functions. To be used by libata EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 05:09:36 +01:00
extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
struct list_head *done_q);
extern void scsi_eh_flush_done_q(struct list_head *done_q);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
extern void scsi_report_bus_reset(struct Scsi_Host *, int);
extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
extern int scsi_block_when_processing_errors(struct scsi_device *);
extern int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
struct scsi_sense_hdr *sshdr);
extern int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
struct scsi_sense_hdr *sshdr);
static inline int scsi_sense_is_deferred(struct scsi_sense_hdr *sshdr)
{
return ((sshdr->response_code >= 0x70) && (sshdr->response_code & 1));
}
extern const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
int desc_type);
extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
u64 * info_out);
[SCSI] add scsi_build_sense_buffer helper function This adds scsi_build_sense_buffer, a simple helper function to build sense data in a buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-25 01:26:49 +01:00
extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* Reset request from external source
*/
#define SCSI_TRY_RESET_DEVICE 1
#define SCSI_TRY_RESET_BUS 2
#define SCSI_TRY_RESET_HOST 3
[SCSI] scsi_error: add target reset handler The problem is that serveral drivers are sending a target reset from the device reset handler, and if we have multiple devices a target reset gets sent for each device when only one would be sufficient. And if we do a target reset it affects all the commands on the target so the device reset handler code only cleaning up one devices's commands makes programming the driver a little more difficult than it should be. This patch adds a target reset handler, which drivers can use to send a target reset. If successful it cleans up the commands for a devices accessed through that starget. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-01 01:25:19 +01:00
#define SCSI_TRY_RESET_TARGET 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
extern int scsi_reset_provider(struct scsi_device *, int);
[SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE - Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals. void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *sesci, unsigned char *cmnd, int cmnd_size, int sense_bytes) Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save structure. void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *sesci); Will undo any changes done to a command by above function. Making it ready for completion. - Re-factor scsi_send_eh_cmnd() to use above APIs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-08 16:36:45 +02:00
struct scsi_eh_save {
[SCSI] implement scsi_data_buffer In preparation for bidi we abstract all IO members of scsi_cmnd, that will need to duplicate, into a substructure. - Group all IO members of scsi_cmnd into a scsi_data_buffer structure. - Adjust accessors to new members. - scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of scsi_cmnd. And work on it. - Adjust scsi_init_io() and scsi_release_buffers() for above change. - Fix other parts of scsi_lib/scsi.c to members migration. Use accessors where appropriate. - fix Documentation about scsi_cmnd in scsi_host.h - scsi_error.c * Changed needed members of struct scsi_eh_save. * Careful considerations in scsi_eh_prep/restore_cmnd. - sd.c and sr.c * sd and sr would adjust IO size to align on device's block size so code needs to change once we move to scsi_data_buff implementation. * Convert code to use scsi_for_each_sg * Use data accessors where appropriate. - tgt: convert libsrp to use scsi_data_buffer - isd200: This driver still bangs on scsi_cmnd IO members, so need changing [jejb: rebased on top of sg_table patches fixed up conflicts and used the synergy to eliminate use_sg and sg_count] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-13 12:47:40 +01:00
/* saved state */
[SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE - Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals. void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *sesci, unsigned char *cmnd, int cmnd_size, int sense_bytes) Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save structure. void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *sesci); Will undo any changes done to a command by above function. Making it ready for completion. - Re-factor scsi_send_eh_cmnd() to use above APIs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-08 16:36:45 +02:00
int result;
enum dma_data_direction data_direction;
[SCSI] scsi_eh_prep_cmnd should save scmd->underflow This patch (as1116) fixes a bug in scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd(). These routines are supposed to save any values they change and restore them later, but someone forgot to save & restore scmd->underflow. This fixes part of the problem reported in Bugzilla #9638. [jejb: fix up rejections around DIF/DIX] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-21 16:25:52 +02:00
unsigned underflow;
[SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE - Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals. void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *sesci, unsigned char *cmnd, int cmnd_size, int sense_bytes) Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save structure. void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *sesci); Will undo any changes done to a command by above function. Making it ready for completion. - Re-factor scsi_send_eh_cmnd() to use above APIs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-08 16:36:45 +02:00
unsigned char cmd_len;
[SCSI] Command protection operation Controllers that support DMA of protection information must be told explicitly how to handle the I/O. The controller has no knowledge of the protection capabilities of the target device so this information must be passed in the scsi_cmnd. - The protection operation tells the HBA whether to generate, strip or verify protection information. - The protection type tells the HBA which layout the target is formatted with. This is necessary because the controller must be able to correctly interpret the included protection information in order to verify it. - When a scsi_cmnd is reused for error handling the protection operation must be cleared and saved while error handling is in progress. - prot_op and prot_type are placed in an existing hole in scsi_cmnd and don't cause the structure to grow. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 10:28:31 +02:00
unsigned char prot_op;
[SCSI] Let scsi_cmnd->cmnd use request->cmd buffer - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-30 10:19:47 +02:00
unsigned char *cmnd;
[SCSI] implement scsi_data_buffer In preparation for bidi we abstract all IO members of scsi_cmnd, that will need to duplicate, into a substructure. - Group all IO members of scsi_cmnd into a scsi_data_buffer structure. - Adjust accessors to new members. - scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of scsi_cmnd. And work on it. - Adjust scsi_init_io() and scsi_release_buffers() for above change. - Fix other parts of scsi_lib/scsi.c to members migration. Use accessors where appropriate. - fix Documentation about scsi_cmnd in scsi_host.h - scsi_error.c * Changed needed members of struct scsi_eh_save. * Careful considerations in scsi_eh_prep/restore_cmnd. - sd.c and sr.c * sd and sr would adjust IO size to align on device's block size so code needs to change once we move to scsi_data_buff implementation. * Convert code to use scsi_for_each_sg * Use data accessors where appropriate. - tgt: convert libsrp to use scsi_data_buffer - isd200: This driver still bangs on scsi_cmnd IO members, so need changing [jejb: rebased on top of sg_table patches fixed up conflicts and used the synergy to eliminate use_sg and sg_count] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-13 12:47:40 +01:00
struct scsi_data_buffer sdb;
[SCSI] bidirectional command support At the block level bidi request uses req->next_rq pointer for a second bidi_read request. At Scsi-midlayer a second scsi_data_buffer structure is used for the bidi_read part. This bidi scsi_data_buffer is put on request->next_rq->special. Struct scsi_cmnd is not changed. - Define scsi_bidi_cmnd() to return true if it is a bidi request and a second sgtable was allocated. - Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer from this command This API is to isolate users from the mechanics of bidi. - Define scsi_end_bidi_request() to do what scsi_end_request() does but for a bidi request. This is necessary because bidi commands are a bit tricky here. (See comments in body) - scsi_release_buffers() will also release the bidi_read scsi_data_buffer - scsi_io_completion() on bidi commands will now call scsi_end_bidi_request() and return. - The previous work done in scsi_init_io() is now done in a new scsi_init_sgtable() (which is 99% identical to old scsi_init_io()) The new scsi_init_io() will call the above twice if needed also for the bidi_read command. Only at this point is a command bidi. - In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not confused by a get-sense command that looks like bidi. This is done by puting NULL at request->next_rq, and restoring. [jejb: update to sg_table and resolve conflicts also update to blk-end-request and resolve conflicts] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-13 12:50:53 +01:00
struct request *next_rq;
[SCSI] implement scsi_data_buffer In preparation for bidi we abstract all IO members of scsi_cmnd, that will need to duplicate, into a substructure. - Group all IO members of scsi_cmnd into a scsi_data_buffer structure. - Adjust accessors to new members. - scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of scsi_cmnd. And work on it. - Adjust scsi_init_io() and scsi_release_buffers() for above change. - Fix other parts of scsi_lib/scsi.c to members migration. Use accessors where appropriate. - fix Documentation about scsi_cmnd in scsi_host.h - scsi_error.c * Changed needed members of struct scsi_eh_save. * Careful considerations in scsi_eh_prep/restore_cmnd. - sd.c and sr.c * sd and sr would adjust IO size to align on device's block size so code needs to change once we move to scsi_data_buff implementation. * Convert code to use scsi_for_each_sg * Use data accessors where appropriate. - tgt: convert libsrp to use scsi_data_buffer - isd200: This driver still bangs on scsi_cmnd IO members, so need changing [jejb: rebased on top of sg_table patches fixed up conflicts and used the synergy to eliminate use_sg and sg_count] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-13 12:47:40 +01:00
/* new command support */
[SCSI] Let scsi_cmnd->cmnd use request->cmd buffer - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-30 10:19:47 +02:00
unsigned char eh_cmnd[BLK_MAX_CDB];
[SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE - Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals. void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *sesci, unsigned char *cmnd, int cmnd_size, int sense_bytes) Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save structure. void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *sesci); Will undo any changes done to a command by above function. Making it ready for completion. - Re-factor scsi_send_eh_cmnd() to use above APIs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-08 16:36:45 +02:00
struct scatterlist sense_sgl;
};
extern void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
struct scsi_eh_save *ses, unsigned char *cmnd,
int cmnd_size, unsigned sense_bytes);
extern void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd,
struct scsi_eh_save *ses);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif /* _SCSI_SCSI_EH_H */