linux/include/trace/events/timer.h

351 lines
7.8 KiB
C
Raw Permalink Normal View History

#undef TRACE_SYSTEM
#define TRACE_SYSTEM timer
#if !defined(_TRACE_TIMER_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_TIMER_H
#include <linux/tracepoint.h>
#include <linux/hrtimer.h>
#include <linux/timer.h>
DECLARE_EVENT_CLASS(timer_class,
TP_PROTO(struct timer_list *timer),
TP_ARGS(timer),
TP_STRUCT__entry(
__field( void *, timer )
),
TP_fast_assign(
__entry->timer = timer;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_printk("timer=%p", __entry->timer)
);
/**
* timer_init - called when the timer is initialized
* @timer: pointer to struct timer_list
*/
DEFINE_EVENT(timer_class, timer_init,
TP_PROTO(struct timer_list *timer),
TP_ARGS(timer)
);
/**
* timer_start - called when the timer is started
* @timer: pointer to struct timer_list
* @expires: the timers expiry time
*/
TRACE_EVENT(timer_start,
TP_PROTO(struct timer_list *timer, unsigned long expires),
TP_ARGS(timer, expires),
TP_STRUCT__entry(
__field( void *, timer )
__field( void *, function )
__field( unsigned long, expires )
__field( unsigned long, now )
),
TP_fast_assign(
__entry->timer = timer;
__entry->function = timer->function;
__entry->expires = expires;
__entry->now = jiffies;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_printk("timer=%p function=%pf expires=%lu [timeout=%ld]",
__entry->timer, __entry->function, __entry->expires,
(long)__entry->expires - __entry->now)
);
/**
* timer_expire_entry - called immediately before the timer callback
* @timer: pointer to struct timer_list
*
* Allows to determine the timer latency.
*/
TRACE_EVENT(timer_expire_entry,
TP_PROTO(struct timer_list *timer),
TP_ARGS(timer),
TP_STRUCT__entry(
__field( void *, timer )
__field( unsigned long, now )
__field( void *, function)
),
TP_fast_assign(
__entry->timer = timer;
__entry->now = jiffies;
__entry->function = timer->function;
),
TP_printk("timer=%p function=%pf now=%lu", __entry->timer, __entry->function,__entry->now)
);
/**
* timer_expire_exit - called immediately after the timer callback returns
* @timer: pointer to struct timer_list
*
* When used in combination with the timer_expire_entry tracepoint we can
* determine the runtime of the timer callback function.
*
* NOTE: Do NOT derefernce timer in TP_fast_assign. The pointer might
* be invalid. We solely track the pointer.
*/
DEFINE_EVENT(timer_class, timer_expire_exit,
TP_PROTO(struct timer_list *timer),
TP_ARGS(timer)
);
/**
* timer_cancel - called when the timer is canceled
* @timer: pointer to struct timer_list
*/
DEFINE_EVENT(timer_class, timer_cancel,
TP_PROTO(struct timer_list *timer),
TP_ARGS(timer)
);
/**
* hrtimer_init - called when the hrtimer is initialized
* @hrtimer: pointer to struct hrtimer
* @clockid: the hrtimers clock
* @mode: the hrtimers mode
*/
TRACE_EVENT(hrtimer_init,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_PROTO(struct hrtimer *hrtimer, clockid_t clockid,
enum hrtimer_mode mode),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_ARGS(hrtimer, clockid, mode),
TP_STRUCT__entry(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__field( void *, hrtimer )
__field( clockid_t, clockid )
__field( enum hrtimer_mode, mode )
),
TP_fast_assign(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__entry->hrtimer = hrtimer;
__entry->clockid = clockid;
__entry->mode = mode;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_printk("hrtimer=%p clockid=%s mode=%s", __entry->hrtimer,
__entry->clockid == CLOCK_REALTIME ?
"CLOCK_REALTIME" : "CLOCK_MONOTONIC",
__entry->mode == HRTIMER_MODE_ABS ?
"HRTIMER_MODE_ABS" : "HRTIMER_MODE_REL")
);
/**
* hrtimer_start - called when the hrtimer is started
* @hrtimer: pointer to struct hrtimer
*/
TRACE_EVENT(hrtimer_start,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_PROTO(struct hrtimer *hrtimer),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_ARGS(hrtimer),
TP_STRUCT__entry(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__field( void *, hrtimer )
__field( void *, function )
__field( s64, expires )
__field( s64, softexpires )
),
TP_fast_assign(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__entry->hrtimer = hrtimer;
__entry->function = hrtimer->function;
__entry->expires = hrtimer_get_expires(hrtimer).tv64;
__entry->softexpires = hrtimer_get_softexpires(hrtimer).tv64;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_printk("hrtimer=%p function=%pf expires=%llu softexpires=%llu",
__entry->hrtimer, __entry->function,
(unsigned long long)ktime_to_ns((ktime_t) {
.tv64 = __entry->expires }),
(unsigned long long)ktime_to_ns((ktime_t) {
.tv64 = __entry->softexpires }))
);
/**
* hrtimer_expire_entry - called immediately before the hrtimer callback
* @hrtimer: pointer to struct hrtimer
* @now: pointer to variable which contains current time of the
* timers base.
*
* Allows to determine the timer latency.
*/
TRACE_EVENT(hrtimer_expire_entry,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_PROTO(struct hrtimer *hrtimer, ktime_t *now),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_ARGS(hrtimer, now),
TP_STRUCT__entry(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__field( void *, hrtimer )
__field( s64, now )
__field( void *, function)
),
TP_fast_assign(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__entry->hrtimer = hrtimer;
__entry->now = now->tv64;
__entry->function = hrtimer->function;
),
TP_printk("hrtimer=%p function=%pf now=%llu", __entry->hrtimer, __entry->function,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
(unsigned long long)ktime_to_ns((ktime_t) { .tv64 = __entry->now }))
);
DECLARE_EVENT_CLASS(hrtimer_class,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_PROTO(struct hrtimer *hrtimer),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_ARGS(hrtimer),
TP_STRUCT__entry(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__field( void *, hrtimer )
),
TP_fast_assign(
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
__entry->hrtimer = hrtimer;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_printk("hrtimer=%p", __entry->hrtimer)
);
/**
* hrtimer_expire_exit - called immediately after the hrtimer callback returns
* @hrtimer: pointer to struct hrtimer
*
* When used in combination with the hrtimer_expire_entry tracepoint we can
* determine the runtime of the callback function.
*/
DEFINE_EVENT(hrtimer_class, hrtimer_expire_exit,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:50:39 +02:00
TP_PROTO(struct hrtimer *hrtimer),
TP_ARGS(hrtimer)
);
/**
* hrtimer_cancel - called when the hrtimer is canceled
* @hrtimer: pointer to struct hrtimer
*/
DEFINE_EVENT(hrtimer_class, hrtimer_cancel,
TP_PROTO(struct hrtimer *hrtimer),
TP_ARGS(hrtimer)
);
/**
* itimer_state - called when itimer is started or canceled
* @which: name of the interval timer
* @value: the itimers value, itimer is canceled if value->it_value is
* zero, otherwise it is started
* @expires: the itimers expiry time
*/
TRACE_EVENT(itimer_state,
TP_PROTO(int which, const struct itimerval *const value,
cputime_t expires),
TP_ARGS(which, value, expires),
TP_STRUCT__entry(
__field( int, which )
__field( cputime_t, expires )
__field( long, value_sec )
__field( long, value_usec )
__field( long, interval_sec )
__field( long, interval_usec )
),
TP_fast_assign(
__entry->which = which;
__entry->expires = expires;
__entry->value_sec = value->it_value.tv_sec;
__entry->value_usec = value->it_value.tv_usec;
__entry->interval_sec = value->it_interval.tv_sec;
__entry->interval_usec = value->it_interval.tv_usec;
),
TP_printk("which=%d expires=%llu it_value=%ld.%ld it_interval=%ld.%ld",
__entry->which, (unsigned long long)__entry->expires,
__entry->value_sec, __entry->value_usec,
__entry->interval_sec, __entry->interval_usec)
);
/**
* itimer_expire - called when itimer expires
* @which: type of the interval timer
* @pid: pid of the process which owns the timer
* @now: current time, used to calculate the latency of itimer
*/
TRACE_EVENT(itimer_expire,
TP_PROTO(int which, struct pid *pid, cputime_t now),
TP_ARGS(which, pid, now),
TP_STRUCT__entry(
__field( int , which )
__field( pid_t, pid )
__field( cputime_t, now )
),
TP_fast_assign(
__entry->which = which;
__entry->now = now;
__entry->pid = pid_nr(pid);
),
TP_printk("which=%d pid=%d now=%llu", __entry->which,
(int) __entry->pid, (unsigned long long)__entry->now)
);
#ifdef CONFIG_NO_HZ_COMMON
TRACE_EVENT(tick_stop,
TP_PROTO(int success, char *error_msg),
TP_ARGS(success, error_msg),
TP_STRUCT__entry(
__field( int , success )
__string( msg, error_msg )
),
TP_fast_assign(
__entry->success = success;
__assign_str(msg, error_msg);
),
TP_printk("success=%s msg=%s", __entry->success ? "yes" : "no", __get_str(msg))
);
#endif
#endif /* _TRACE_TIMER_H */
/* This part must be outside protection */
#include <trace/define_trace.h>