linux/fs/btrfs/extent_io.c

5638 lines
141 KiB
C
Raw Normal View History

#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/bio.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/page-flags.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/pagevec.h>
#include <linux/prefetch.h>
#include <linux/cleancache.h>
#include "extent_io.h"
#include "extent_map.h"
#include "ctree.h"
#include "btrfs_inode.h"
#include "volumes.h"
#include "check-integrity.h"
#include "locking.h"
#include "rcu-string.h"
#include "backref.h"
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
static struct bio_set *btrfs_bioset;
static inline bool extent_state_in_tree(const struct extent_state *state)
{
return !RB_EMPTY_NODE(&state->rb_node);
}
#ifdef CONFIG_BTRFS_DEBUG
static LIST_HEAD(buffers);
static LIST_HEAD(states);
static DEFINE_SPINLOCK(leak_lock);
static inline
void btrfs_leak_debug_add(struct list_head *new, struct list_head *head)
{
unsigned long flags;
spin_lock_irqsave(&leak_lock, flags);
list_add(new, head);
spin_unlock_irqrestore(&leak_lock, flags);
}
static inline
void btrfs_leak_debug_del(struct list_head *entry)
{
unsigned long flags;
spin_lock_irqsave(&leak_lock, flags);
list_del(entry);
spin_unlock_irqrestore(&leak_lock, flags);
}
static inline
void btrfs_leak_debug_check(void)
{
struct extent_state *state;
struct extent_buffer *eb;
while (!list_empty(&states)) {
state = list_entry(states.next, struct extent_state, leak_list);
pr_err("BTRFS: state leak: start %llu end %llu state %u in tree %d refs %d\n",
state->start, state->end, state->state,
extent_state_in_tree(state),
atomic_read(&state->refs));
list_del(&state->leak_list);
kmem_cache_free(extent_state_cache, state);
}
while (!list_empty(&buffers)) {
eb = list_entry(buffers.next, struct extent_buffer, leak_list);
printk(KERN_ERR "BTRFS: buffer leak start %llu len %lu "
"refs %d\n",
eb->start, eb->len, atomic_read(&eb->refs));
list_del(&eb->leak_list);
kmem_cache_free(extent_buffer_cache, eb);
}
}
#define btrfs_debug_check_extent_io_range(tree, start, end) \
__btrfs_debug_check_extent_io_range(__func__, (tree), (start), (end))
static inline void __btrfs_debug_check_extent_io_range(const char *caller,
struct extent_io_tree *tree, u64 start, u64 end)
{
struct inode *inode;
u64 isize;
if (!tree->mapping)
return;
inode = tree->mapping->host;
isize = i_size_read(inode);
if (end >= PAGE_SIZE && (end % 2) == 0 && end != isize - 1) {
printk_ratelimited(KERN_DEBUG
"BTRFS: %s: ino %llu isize %llu odd range [%llu,%llu]\n",
caller, btrfs_ino(inode), isize, start, end);
}
}
#else
#define btrfs_leak_debug_add(new, head) do {} while (0)
#define btrfs_leak_debug_del(entry) do {} while (0)
#define btrfs_leak_debug_check() do {} while (0)
#define btrfs_debug_check_extent_io_range(c, s, e) do {} while (0)
#endif
#define BUFFER_LRU_MAX 64
struct tree_entry {
u64 start;
u64 end;
struct rb_node rb_node;
};
struct extent_page_data {
struct bio *bio;
struct extent_io_tree *tree;
get_extent_t *get_extent;
unsigned long bio_flags;
/* tells writepage not to lock the state bits for this range
* it still does the unlocking
*/
unsigned int extent_locked:1;
/* tells the submit_bio code to use a WRITE_SYNC */
unsigned int sync_io:1;
};
static noinline void flush_write_bio(void *data);
static inline struct btrfs_fs_info *
tree_fs_info(struct extent_io_tree *tree)
{
if (!tree->mapping)
return NULL;
return btrfs_sb(tree->mapping->host->i_sb);
}
int __init extent_io_init(void)
{
extent_state_cache = kmem_cache_create("btrfs_extent_state",
sizeof(struct extent_state), 0,
SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_state_cache)
return -ENOMEM;
extent_buffer_cache = kmem_cache_create("btrfs_extent_buffer",
sizeof(struct extent_buffer), 0,
SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_buffer_cache)
goto free_state_cache;
btrfs_bioset = bioset_create(BIO_POOL_SIZE,
offsetof(struct btrfs_io_bio, bio));
if (!btrfs_bioset)
goto free_buffer_cache;
btrfs: Fix crash due to not allocating integrity data for a bioset When btrfs creates a bioset, we must also allocate the integrity data pool. Otherwise btrfs will crash when it tries to submit a bio to a checksumming disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 PGD 2305e4067 PUD 23063d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug] CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8802451c9720 ti: ffff880230698000 task.ti: ffff880230698000 RIP: 0010:[<ffffffff8111e28a>] [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP: 0018:ffff880230699688 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000005f8445 RDX: 0000000000000001 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff8802306996f8 R08: 0000000000011200 R09: 0000000000000008 R10: 0000000000000020 R11: ffff88009d6e8000 R12: 0000000000011210 R13: 0000000000000030 R14: ffff8802306996b8 R15: ffff8802451c9720 FS: 00007f25b8a16800(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000230576000 CR4: 00000000000007e0 Stack: ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250 ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000 0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900 Call Trace: [<ffffffff811b2208>] bio_integrity_alloc+0x48/0x1b0 [<ffffffff811b26fc>] bio_integrity_prep+0xac/0x360 [<ffffffff8111e298>] ? mempool_alloc+0x58/0x150 [<ffffffffa03e8041>] ? alloc_extent_state+0x31/0x110 [btrfs] [<ffffffff81241579>] blk_queue_bio+0x1c9/0x460 [<ffffffff8123e58a>] generic_make_request+0xca/0x100 [<ffffffff8123e639>] submit_bio+0x79/0x160 [<ffffffffa03f865e>] btrfs_map_bio+0x48e/0x5b0 [btrfs] [<ffffffffa03c821a>] btree_submit_bio_hook+0xda/0x110 [btrfs] [<ffffffffa03e7eba>] submit_one_bio+0x6a/0xa0 [btrfs] [<ffffffffa03ef450>] read_extent_buffer_pages+0x250/0x310 [btrfs] [<ffffffff8125eef6>] ? __radix_tree_preload+0x66/0xf0 [<ffffffff8125f1c5>] ? radix_tree_insert+0x95/0x260 [<ffffffffa03c66f6>] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120 [btrfs] [<ffffffffa03c8c1a>] read_tree_block+0x3a/0x60 [btrfs] [<ffffffffa03caefd>] open_ctree+0x139d/0x2030 [btrfs] [<ffffffffa03a282a>] btrfs_mount+0x53a/0x7d0 [btrfs] [<ffffffff8113ab0b>] ? pcpu_alloc+0x8eb/0x9f0 [<ffffffff81167305>] ? __kmalloc_track_caller+0x35/0x1e0 [<ffffffff81176ba0>] mount_fs+0x20/0xd0 [<ffffffff81191096>] vfs_kern_mount+0x76/0x120 [<ffffffff81193320>] do_mount+0x200/0xa40 [<ffffffff81135cdb>] ? strndup_user+0x5b/0x80 [<ffffffff81193bf0>] SyS_mount+0x90/0xe0 [<ffffffff8156d31d>] system_call_fastpath+0x1a/0x1f Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48 89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7 44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74 RIP [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP <ffff880230699688> CR2: 0000000000000018 ---[ end trace 7a96042017ed21e2 ]--- Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-20 05:37:07 +02:00
if (bioset_integrity_create(btrfs_bioset, BIO_POOL_SIZE))
goto free_bioset;
return 0;
btrfs: Fix crash due to not allocating integrity data for a bioset When btrfs creates a bioset, we must also allocate the integrity data pool. Otherwise btrfs will crash when it tries to submit a bio to a checksumming disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 PGD 2305e4067 PUD 23063d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug] CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8802451c9720 ti: ffff880230698000 task.ti: ffff880230698000 RIP: 0010:[<ffffffff8111e28a>] [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP: 0018:ffff880230699688 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000005f8445 RDX: 0000000000000001 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff8802306996f8 R08: 0000000000011200 R09: 0000000000000008 R10: 0000000000000020 R11: ffff88009d6e8000 R12: 0000000000011210 R13: 0000000000000030 R14: ffff8802306996b8 R15: ffff8802451c9720 FS: 00007f25b8a16800(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000230576000 CR4: 00000000000007e0 Stack: ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250 ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000 0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900 Call Trace: [<ffffffff811b2208>] bio_integrity_alloc+0x48/0x1b0 [<ffffffff811b26fc>] bio_integrity_prep+0xac/0x360 [<ffffffff8111e298>] ? mempool_alloc+0x58/0x150 [<ffffffffa03e8041>] ? alloc_extent_state+0x31/0x110 [btrfs] [<ffffffff81241579>] blk_queue_bio+0x1c9/0x460 [<ffffffff8123e58a>] generic_make_request+0xca/0x100 [<ffffffff8123e639>] submit_bio+0x79/0x160 [<ffffffffa03f865e>] btrfs_map_bio+0x48e/0x5b0 [btrfs] [<ffffffffa03c821a>] btree_submit_bio_hook+0xda/0x110 [btrfs] [<ffffffffa03e7eba>] submit_one_bio+0x6a/0xa0 [btrfs] [<ffffffffa03ef450>] read_extent_buffer_pages+0x250/0x310 [btrfs] [<ffffffff8125eef6>] ? __radix_tree_preload+0x66/0xf0 [<ffffffff8125f1c5>] ? radix_tree_insert+0x95/0x260 [<ffffffffa03c66f6>] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120 [btrfs] [<ffffffffa03c8c1a>] read_tree_block+0x3a/0x60 [btrfs] [<ffffffffa03caefd>] open_ctree+0x139d/0x2030 [btrfs] [<ffffffffa03a282a>] btrfs_mount+0x53a/0x7d0 [btrfs] [<ffffffff8113ab0b>] ? pcpu_alloc+0x8eb/0x9f0 [<ffffffff81167305>] ? __kmalloc_track_caller+0x35/0x1e0 [<ffffffff81176ba0>] mount_fs+0x20/0xd0 [<ffffffff81191096>] vfs_kern_mount+0x76/0x120 [<ffffffff81193320>] do_mount+0x200/0xa40 [<ffffffff81135cdb>] ? strndup_user+0x5b/0x80 [<ffffffff81193bf0>] SyS_mount+0x90/0xe0 [<ffffffff8156d31d>] system_call_fastpath+0x1a/0x1f Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48 89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7 44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74 RIP [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP <ffff880230699688> CR2: 0000000000000018 ---[ end trace 7a96042017ed21e2 ]--- Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-20 05:37:07 +02:00
free_bioset:
bioset_free(btrfs_bioset);
btrfs_bioset = NULL;
free_buffer_cache:
kmem_cache_destroy(extent_buffer_cache);
extent_buffer_cache = NULL;
free_state_cache:
kmem_cache_destroy(extent_state_cache);
extent_state_cache = NULL;
return -ENOMEM;
}
void extent_io_exit(void)
{
btrfs_leak_debug_check();
/*
* Make sure all delayed rcu free are flushed before we
* destroy caches.
*/
rcu_barrier();
if (extent_state_cache)
kmem_cache_destroy(extent_state_cache);
if (extent_buffer_cache)
kmem_cache_destroy(extent_buffer_cache);
if (btrfs_bioset)
bioset_free(btrfs_bioset);
}
void extent_io_tree_init(struct extent_io_tree *tree,
struct address_space *mapping)
{
tree->state = RB_ROOT;
tree->ops = NULL;
tree->dirty_bytes = 0;
spin_lock_init(&tree->lock);
tree->mapping = mapping;
}
static struct extent_state *alloc_extent_state(gfp_t mask)
{
struct extent_state *state;
state = kmem_cache_alloc(extent_state_cache, mask);
if (!state)
return state;
state->state = 0;
state->private = 0;
RB_CLEAR_NODE(&state->rb_node);
btrfs_leak_debug_add(&state->leak_list, &states);
atomic_set(&state->refs, 1);
init_waitqueue_head(&state->wq);
trace_alloc_extent_state(state, mask, _RET_IP_);
return state;
}
void free_extent_state(struct extent_state *state)
{
if (!state)
return;
if (atomic_dec_and_test(&state->refs)) {
WARN_ON(extent_state_in_tree(state));
btrfs_leak_debug_del(&state->leak_list);
trace_free_extent_state(state, _RET_IP_);
kmem_cache_free(extent_state_cache, state);
}
}
static struct rb_node *tree_insert(struct rb_root *root,
struct rb_node *search_start,
u64 offset,
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
struct rb_node *node,
struct rb_node ***p_in,
struct rb_node **parent_in)
{
struct rb_node **p;
struct rb_node *parent = NULL;
struct tree_entry *entry;
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
if (p_in && parent_in) {
p = *p_in;
parent = *parent_in;
goto do_insert;
}
p = search_start ? &search_start : &root->rb_node;
while (*p) {
parent = *p;
entry = rb_entry(parent, struct tree_entry, rb_node);
if (offset < entry->start)
p = &(*p)->rb_left;
else if (offset > entry->end)
p = &(*p)->rb_right;
else
return parent;
}
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
do_insert:
rb_link_node(node, parent, p);
rb_insert_color(node, root);
return NULL;
}
static struct rb_node *__etree_search(struct extent_io_tree *tree, u64 offset,
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
struct rb_node **prev_ret,
struct rb_node **next_ret,
struct rb_node ***p_ret,
struct rb_node **parent_ret)
{
struct rb_root *root = &tree->state;
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
struct rb_node **n = &root->rb_node;
struct rb_node *prev = NULL;
struct rb_node *orig_prev = NULL;
struct tree_entry *entry;
struct tree_entry *prev_entry = NULL;
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
while (*n) {
prev = *n;
entry = rb_entry(prev, struct tree_entry, rb_node);
prev_entry = entry;
if (offset < entry->start)
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
n = &(*n)->rb_left;
else if (offset > entry->end)
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
n = &(*n)->rb_right;
else
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
return *n;
}
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
if (p_ret)
*p_ret = n;
if (parent_ret)
*parent_ret = prev;
if (prev_ret) {
orig_prev = prev;
while (prev && offset > prev_entry->end) {
prev = rb_next(prev);
prev_entry = rb_entry(prev, struct tree_entry, rb_node);
}
*prev_ret = prev;
prev = orig_prev;
}
if (next_ret) {
prev_entry = rb_entry(prev, struct tree_entry, rb_node);
while (prev && offset < prev_entry->start) {
prev = rb_prev(prev);
prev_entry = rb_entry(prev, struct tree_entry, rb_node);
}
*next_ret = prev;
}
return NULL;
}
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
static inline struct rb_node *
tree_search_for_insert(struct extent_io_tree *tree,
u64 offset,
struct rb_node ***p_ret,
struct rb_node **parent_ret)
{
struct rb_node *prev = NULL;
struct rb_node *ret;
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
ret = __etree_search(tree, offset, &prev, NULL, p_ret, parent_ret);
if (!ret)
return prev;
return ret;
}
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
static inline struct rb_node *tree_search(struct extent_io_tree *tree,
u64 offset)
{
return tree_search_for_insert(tree, offset, NULL, NULL);
}
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
static void merge_cb(struct extent_io_tree *tree, struct extent_state *new,
struct extent_state *other)
{
if (tree->ops && tree->ops->merge_extent_hook)
tree->ops->merge_extent_hook(tree->mapping->host, new,
other);
}
/*
* utility function to look for merge candidates inside a given range.
* Any extents with matching state are merged together into a single
* extent in the tree. Extents with EXTENT_IO in their state field
* are not merged because the end_io handlers need to be able to do
* operations on them without sleeping (or doing allocations/splits).
*
* This should be called with the tree lock held.
*/
static void merge_state(struct extent_io_tree *tree,
struct extent_state *state)
{
struct extent_state *other;
struct rb_node *other_node;
if (state->state & (EXTENT_IOBITS | EXTENT_BOUNDARY))
return;
other_node = rb_prev(&state->rb_node);
if (other_node) {
other = rb_entry(other_node, struct extent_state, rb_node);
if (other->end == state->start - 1 &&
other->state == state->state) {
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
merge_cb(tree, state, other);
state->start = other->start;
rb_erase(&other->rb_node, &tree->state);
RB_CLEAR_NODE(&other->rb_node);
free_extent_state(other);
}
}
other_node = rb_next(&state->rb_node);
if (other_node) {
other = rb_entry(other_node, struct extent_state, rb_node);
if (other->start == state->end + 1 &&
other->state == state->state) {
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
merge_cb(tree, state, other);
state->end = other->end;
rb_erase(&other->rb_node, &tree->state);
RB_CLEAR_NODE(&other->rb_node);
free_extent_state(other);
}
}
}
static void set_state_cb(struct extent_io_tree *tree,
struct extent_state *state, unsigned *bits)
{
if (tree->ops && tree->ops->set_bit_hook)
tree->ops->set_bit_hook(tree->mapping->host, state, bits);
}
static void clear_state_cb(struct extent_io_tree *tree,
struct extent_state *state, unsigned *bits)
{
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
if (tree->ops && tree->ops->clear_bit_hook)
tree->ops->clear_bit_hook(tree->mapping->host, state, bits);
}
static void set_state_bits(struct extent_io_tree *tree,
struct extent_state *state, unsigned *bits);
/*
* insert an extent_state struct into the tree. 'bits' are set on the
* struct before it is inserted.
*
* This may return -EEXIST if the extent is already there, in which case the
* state struct is freed.
*
* The tree lock is not taken internally. This is a utility function and
* probably isn't what you want to call (see set/clear_extent_bit).
*/
static int insert_state(struct extent_io_tree *tree,
struct extent_state *state, u64 start, u64 end,
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
struct rb_node ***p,
struct rb_node **parent,
unsigned *bits)
{
struct rb_node *node;
if (end < start)
WARN(1, KERN_ERR "BTRFS: end < start %llu %llu\n",
end, start);
state->start = start;
state->end = end;
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
set_state_bits(tree, state, bits);
node = tree_insert(&tree->state, NULL, end, &state->rb_node, p, parent);
if (node) {
struct extent_state *found;
found = rb_entry(node, struct extent_state, rb_node);
printk(KERN_ERR "BTRFS: found node %llu %llu on insert of "
"%llu %llu\n",
found->start, found->end, start, end);
return -EEXIST;
}
merge_state(tree, state);
return 0;
}
static void split_cb(struct extent_io_tree *tree, struct extent_state *orig,
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
u64 split)
{
if (tree->ops && tree->ops->split_extent_hook)
tree->ops->split_extent_hook(tree->mapping->host, orig, split);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
}
/*
* split a given extent state struct in two, inserting the preallocated
* struct 'prealloc' as the newly created second half. 'split' indicates an
* offset inside 'orig' where it should be split.
*
* Before calling,
* the tree has 'orig' at [orig->start, orig->end]. After calling, there
* are two extent state structs in the tree:
* prealloc: [orig->start, split - 1]
* orig: [ split, orig->end ]
*
* The tree locks are not taken by this function. They need to be held
* by the caller.
*/
static int split_state(struct extent_io_tree *tree, struct extent_state *orig,
struct extent_state *prealloc, u64 split)
{
struct rb_node *node;
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
split_cb(tree, orig, split);
prealloc->start = orig->start;
prealloc->end = split - 1;
prealloc->state = orig->state;
orig->start = split;
node = tree_insert(&tree->state, &orig->rb_node, prealloc->end,
&prealloc->rb_node, NULL, NULL);
if (node) {
free_extent_state(prealloc);
return -EEXIST;
}
return 0;
}
static struct extent_state *next_state(struct extent_state *state)
{
struct rb_node *next = rb_next(&state->rb_node);
if (next)
return rb_entry(next, struct extent_state, rb_node);
else
return NULL;
}
/*
* utility function to clear some bits in an extent state struct.
* it will optionally wake up any one waiting on this state (wake == 1).
*
* If no bits are set on the state struct after clearing things, the
* struct is freed and removed from the tree
*/
static struct extent_state *clear_state_bit(struct extent_io_tree *tree,
struct extent_state *state,
unsigned *bits, int wake)
{
struct extent_state *next;
unsigned bits_to_clear = *bits & ~EXTENT_CTLBITS;
if ((bits_to_clear & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) {
u64 range = state->end - state->start + 1;
WARN_ON(range > tree->dirty_bytes);
tree->dirty_bytes -= range;
}
clear_state_cb(tree, state, bits);
state->state &= ~bits_to_clear;
if (wake)
wake_up(&state->wq);
if (state->state == 0) {
next = next_state(state);
if (extent_state_in_tree(state)) {
rb_erase(&state->rb_node, &tree->state);
RB_CLEAR_NODE(&state->rb_node);
free_extent_state(state);
} else {
WARN_ON(1);
}
} else {
merge_state(tree, state);
next = next_state(state);
}
return next;
}
static struct extent_state *
alloc_extent_state_atomic(struct extent_state *prealloc)
{
if (!prealloc)
prealloc = alloc_extent_state(GFP_ATOMIC);
return prealloc;
}
static void extent_io_tree_panic(struct extent_io_tree *tree, int err)
{
btrfs_panic(tree_fs_info(tree), err, "Locking error: "
"Extent tree was modified by another "
"thread while locked.");
}
/*
* clear some bits on a range in the tree. This may require splitting
* or inserting elements in the tree, so the gfp mask is used to
* indicate which allocations or sleeping are allowed.
*
* pass 'wake' == 1 to kick any sleepers, and 'delete' == 1 to remove
* the given range from the tree regardless of state (ie for truncate).
*
* the range [start, end] is inclusive.
*
* This takes the tree lock, and returns 0 on success and < 0 on error.
*/
int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, int wake, int delete,
struct extent_state **cached_state,
gfp_t mask)
{
struct extent_state *state;
struct extent_state *cached;
struct extent_state *prealloc = NULL;
struct rb_node *node;
u64 last_end;
int err;
int clear = 0;
btrfs_debug_check_extent_io_range(tree, start, end);
if (bits & EXTENT_DELALLOC)
bits |= EXTENT_NORESERVE;
if (delete)
bits |= ~EXTENT_CTLBITS;
bits |= EXTENT_FIRST_DELALLOC;
if (bits & (EXTENT_IOBITS | EXTENT_BOUNDARY))
clear = 1;
again:
if (!prealloc && (mask & __GFP_WAIT)) {
/*
* Don't care for allocation failure here because we might end
* up not needing the pre-allocated extent state at all, which
* is the case if we only have in the tree extent states that
* cover our input range and don't cover too any other range.
* If we end up needing a new extent state we allocate it later.
*/
prealloc = alloc_extent_state(mask);
}
spin_lock(&tree->lock);
if (cached_state) {
cached = *cached_state;
if (clear) {
*cached_state = NULL;
cached_state = NULL;
}
if (cached && extent_state_in_tree(cached) &&
cached->start <= start && cached->end > start) {
if (clear)
atomic_dec(&cached->refs);
state = cached;
goto hit_next;
}
if (clear)
free_extent_state(cached);
}
/*
* this search will find the extents that end after
* our range starts
*/
node = tree_search(tree, start);
if (!node)
goto out;
state = rb_entry(node, struct extent_state, rb_node);
hit_next:
if (state->start > end)
goto out;
WARN_ON(state->end < start);
last_end = state->end;
/* the state doesn't have the wanted bits, go ahead */
if (!(state->state & bits)) {
state = next_state(state);
goto next;
}
/*
* | ---- desired range ---- |
* | state | or
* | ------------- state -------------- |
*
* We need to split the extent we found, and may flip
* bits on second half.
*
* If the extent we found extends past our range, we
* just split and search again. It'll get split again
* the next time though.
*
* If the extent we found is inside our range, we clear
* the desired bit on it.
*/
if (state->start < start) {
prealloc = alloc_extent_state_atomic(prealloc);
BUG_ON(!prealloc);
err = split_state(tree, state, prealloc, start);
if (err)
extent_io_tree_panic(tree, err);
prealloc = NULL;
if (err)
goto out;
if (state->end <= end) {
state = clear_state_bit(tree, state, &bits, wake);
goto next;
}
goto search_again;
}
/*
* | ---- desired range ---- |
* | state |
* We need to split the extent, and clear the bit
* on the first half
*/
if (state->start <= end && state->end > end) {
prealloc = alloc_extent_state_atomic(prealloc);
BUG_ON(!prealloc);
err = split_state(tree, state, prealloc, end + 1);
if (err)
extent_io_tree_panic(tree, err);
if (wake)
wake_up(&state->wq);
clear_state_bit(tree, prealloc, &bits, wake);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
prealloc = NULL;
goto out;
}
state = clear_state_bit(tree, state, &bits, wake);
next:
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
if (start <= end && state && !need_resched())
goto hit_next;
goto search_again;
out:
spin_unlock(&tree->lock);
if (prealloc)
free_extent_state(prealloc);
return 0;
search_again:
if (start > end)
goto out;
spin_unlock(&tree->lock);
if (mask & __GFP_WAIT)
cond_resched();
goto again;
}
static void wait_on_state(struct extent_io_tree *tree,
struct extent_state *state)
__releases(tree->lock)
__acquires(tree->lock)
{
DEFINE_WAIT(wait);
prepare_to_wait(&state->wq, &wait, TASK_UNINTERRUPTIBLE);
spin_unlock(&tree->lock);
schedule();
spin_lock(&tree->lock);
finish_wait(&state->wq, &wait);
}
/*
* waits for one or more bits to clear on a range in the state tree.
* The range [start, end] is inclusive.
* The tree lock is taken by this function
*/
static void wait_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
unsigned long bits)
{
struct extent_state *state;
struct rb_node *node;
btrfs_debug_check_extent_io_range(tree, start, end);
spin_lock(&tree->lock);
again:
while (1) {
/*
* this search will find all the extents that end after
* our range starts
*/
node = tree_search(tree, start);
process_node:
if (!node)
break;
state = rb_entry(node, struct extent_state, rb_node);
if (state->start > end)
goto out;
if (state->state & bits) {
start = state->start;
atomic_inc(&state->refs);
wait_on_state(tree, state);
free_extent_state(state);
goto again;
}
start = state->end + 1;
if (start > end)
break;
if (!cond_resched_lock(&tree->lock)) {
node = rb_next(node);
goto process_node;
}
}
out:
spin_unlock(&tree->lock);
}
static void set_state_bits(struct extent_io_tree *tree,
struct extent_state *state,
unsigned *bits)
{
unsigned bits_to_set = *bits & ~EXTENT_CTLBITS;
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
set_state_cb(tree, state, bits);
if ((bits_to_set & EXTENT_DIRTY) && !(state->state & EXTENT_DIRTY)) {
u64 range = state->end - state->start + 1;
tree->dirty_bytes += range;
}
state->state |= bits_to_set;
}
static void cache_state_if_flags(struct extent_state *state,
struct extent_state **cached_ptr,
unsigned flags)
{
if (cached_ptr && !(*cached_ptr)) {
if (!flags || (state->state & flags)) {
*cached_ptr = state;
atomic_inc(&state->refs);
}
}
}
static void cache_state(struct extent_state *state,
struct extent_state **cached_ptr)
{
return cache_state_if_flags(state, cached_ptr,
EXTENT_IOBITS | EXTENT_BOUNDARY);
}
/*
* set some bits on a range in the tree. This may require allocations or
* sleeping, so the gfp mask is used to indicate what is allowed.
*
* If any of the exclusive bits are set, this will fail with -EEXIST if some
* part of the range already has the desired bits set. The start of the
* existing range is returned in failed_start in this case.
*
* [start, end] is inclusive This takes the tree lock.
*/
static int __must_check
__set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, unsigned exclusive_bits,
u64 *failed_start, struct extent_state **cached_state,
gfp_t mask)
{
struct extent_state *state;
struct extent_state *prealloc = NULL;
struct rb_node *node;
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
struct rb_node **p;
struct rb_node *parent;
int err = 0;
u64 last_start;
u64 last_end;
btrfs_debug_check_extent_io_range(tree, start, end);
bits |= EXTENT_FIRST_DELALLOC;
again:
if (!prealloc && (mask & __GFP_WAIT)) {
prealloc = alloc_extent_state(mask);
BUG_ON(!prealloc);
}
spin_lock(&tree->lock);
if (cached_state && *cached_state) {
state = *cached_state;
if (state->start <= start && state->end > start &&
extent_state_in_tree(state)) {
node = &state->rb_node;
goto hit_next;
}
}
/*
* this search will find all the extents that end after
* our range starts.
*/
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
node = tree_search_for_insert(tree, start, &p, &parent);
if (!node) {
prealloc = alloc_extent_state_atomic(prealloc);
BUG_ON(!prealloc);
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
err = insert_state(tree, prealloc, start, end,
&p, &parent, &bits);
if (err)
extent_io_tree_panic(tree, err);
cache_state(prealloc, cached_state);
prealloc = NULL;
goto out;
}
state = rb_entry(node, struct extent_state, rb_node);
hit_next:
last_start = state->start;
last_end = state->end;
/*
* | ---- desired range ---- |
* | state |
*
* Just lock what we found and keep going
*/
if (state->start == start && state->end <= end) {
if (state->state & exclusive_bits) {
*failed_start = state->start;
err = -EEXIST;
goto out;
}
set_state_bits(tree, state, &bits);
cache_state(state, cached_state);
merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
state = next_state(state);
if (start < end && state && state->start == start &&
!need_resched())
goto hit_next;
goto search_again;
}
/*
* | ---- desired range ---- |
* | state |
* or
* | ------------- state -------------- |
*
* We need to split the extent we found, and may flip bits on
* second half.
*
* If the extent we found extends past our
* range, we just split and search again. It'll get split
* again the next time though.
*
* If the extent we found is inside our range, we set the
* desired bit on it.
*/
if (state->start < start) {
if (state->state & exclusive_bits) {
*failed_start = start;
err = -EEXIST;
goto out;
}
prealloc = alloc_extent_state_atomic(prealloc);
BUG_ON(!prealloc);
err = split_state(tree, state, prealloc, start);
if (err)
extent_io_tree_panic(tree, err);
prealloc = NULL;
if (err)
goto out;
if (state->end <= end) {
set_state_bits(tree, state, &bits);
cache_state(state, cached_state);
merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
state = next_state(state);
if (start < end && state && state->start == start &&
!need_resched())
goto hit_next;
}
goto search_again;
}
/*
* | ---- desired range ---- |
* | state | or | state |
*
* There's a hole, we need to insert something in it and
* ignore the extent we found.
*/
if (state->start > start) {
u64 this_end;
if (end < last_start)
this_end = end;
else
this_end = last_start - 1;
prealloc = alloc_extent_state_atomic(prealloc);
BUG_ON(!prealloc);
/*
* Avoid to free 'prealloc' if it can be merged with
* the later extent.
*/
err = insert_state(tree, prealloc, start, this_end,
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
NULL, NULL, &bits);
if (err)
extent_io_tree_panic(tree, err);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 22:12:44 +02:00
cache_state(prealloc, cached_state);
prealloc = NULL;
start = this_end + 1;
goto search_again;
}
/*
* | ---- desired range ---- |
* | state |
* We need to split the extent, and set the bit
* on the first half
*/
if (state->start <= end && state->end > end) {
if (state->state & exclusive_bits) {
*failed_start = start;
err = -EEXIST;
goto out;
}
prealloc = alloc_extent_state_atomic(prealloc);
BUG_ON(!prealloc);
err = split_state(tree, state, prealloc, end + 1);
if (err)
extent_io_tree_panic(tree, err);
set_state_bits(tree, prealloc, &bits);
cache_state(prealloc, cached_state);
merge_state(tree, prealloc);
prealloc = NULL;
goto out;
}
goto search_again;
out:
spin_unlock(&tree->lock);
if (prealloc)
free_extent_state(prealloc);
return err;
search_again:
if (start > end)
goto out;
spin_unlock(&tree->lock);
if (mask & __GFP_WAIT)
cond_resched();
goto again;
}
int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, u64 * failed_start,
struct extent_state **cached_state, gfp_t mask)
{
return __set_extent_bit(tree, start, end, bits, 0, failed_start,
cached_state, mask);
}
/**
* convert_extent_bit - convert all bits in a given range from one bit to
* another
* @tree: the io tree to search
* @start: the start offset in bytes
* @end: the end offset in bytes (inclusive)
* @bits: the bits to set in this range
* @clear_bits: the bits to clear in this range
* @cached_state: state that we're going to cache
* @mask: the allocation mask
*
* This will go through and set bits for the given range. If any states exist
* already in this range they are set with the given bit and cleared of the
* clear_bits. This is only meant to be used by things that are mergeable, ie
* converting from say DELALLOC to DIRTY. This is not meant to be used with
* boundary bits like LOCK.
*/
int convert_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, unsigned clear_bits,
struct extent_state **cached_state, gfp_t mask)
{
struct extent_state *state;
struct extent_state *prealloc = NULL;
struct rb_node *node;
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
struct rb_node **p;
struct rb_node *parent;
int err = 0;
u64 last_start;
u64 last_end;
bool first_iteration = true;
btrfs_debug_check_extent_io_range(tree, start, end);
again:
if (!prealloc && (mask & __GFP_WAIT)) {
/*
* Best effort, don't worry if extent state allocation fails
* here for the first iteration. We might have a cached state
* that matches exactly the target range, in which case no
* extent state allocations are needed. We'll only know this
* after locking the tree.
*/
prealloc = alloc_extent_state(mask);
if (!prealloc && !first_iteration)
return -ENOMEM;
}
spin_lock(&tree->lock);
if (cached_state && *cached_state) {
state = *cached_state;
if (state->start <= start && state->end > start &&
extent_state_in_tree(state)) {
node = &state->rb_node;
goto hit_next;
}
}
/*
* this search will find all the extents that end after
* our range starts.
*/
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
node = tree_search_for_insert(tree, start, &p, &parent);
if (!node) {
prealloc = alloc_extent_state_atomic(prealloc);
if (!prealloc) {
err = -ENOMEM;
goto out;
}
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
err = insert_state(tree, prealloc, start, end,
&p, &parent, &bits);
if (err)
extent_io_tree_panic(tree, err);
cache_state(prealloc, cached_state);
prealloc = NULL;
goto out;
}
state = rb_entry(node, struct extent_state, rb_node);
hit_next:
last_start = state->start;
last_end = state->end;
/*
* | ---- desired range ---- |
* | state |
*
* Just lock what we found and keep going
*/
if (state->start == start && state->end <= end) {
set_state_bits(tree, state, &bits);
cache_state(state, cached_state);
state = clear_state_bit(tree, state, &clear_bits, 0);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
if (start < end && state && state->start == start &&
!need_resched())
goto hit_next;
goto search_again;
}
/*
* | ---- desired range ---- |
* | state |
* or
* | ------------- state -------------- |
*
* We need to split the extent we found, and may flip bits on
* second half.
*
* If the extent we found extends past our
* range, we just split and search again. It'll get split
* again the next time though.
*
* If the extent we found is inside our range, we set the
* desired bit on it.
*/
if (state->start < start) {
prealloc = alloc_extent_state_atomic(prealloc);
if (!prealloc) {
err = -ENOMEM;
goto out;
}
err = split_state(tree, state, prealloc, start);
if (err)
extent_io_tree_panic(tree, err);
prealloc = NULL;
if (err)
goto out;
if (state->end <= end) {
set_state_bits(tree, state, &bits);
cache_state(state, cached_state);
state = clear_state_bit(tree, state, &clear_bits, 0);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
if (start < end && state && state->start == start &&
!need_resched())
goto hit_next;
}
goto search_again;
}
/*
* | ---- desired range ---- |
* | state | or | state |
*
* There's a hole, we need to insert something in it and
* ignore the extent we found.
*/
if (state->start > start) {
u64 this_end;
if (end < last_start)
this_end = end;
else
this_end = last_start - 1;
prealloc = alloc_extent_state_atomic(prealloc);
if (!prealloc) {
err = -ENOMEM;
goto out;
}
/*
* Avoid to free 'prealloc' if it can be merged with
* the later extent.
*/
err = insert_state(tree, prealloc, start, this_end,
Btrfs: more efficient extent state insertions Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-26 16:41:47 +01:00
NULL, NULL, &bits);
if (err)
extent_io_tree_panic(tree, err);
cache_state(prealloc, cached_state);
prealloc = NULL;
start = this_end + 1;
goto search_again;
}
/*
* | ---- desired range ---- |
* | state |
* We need to split the extent, and set the bit
* on the first half
*/
if (state->start <= end && state->end > end) {
prealloc = alloc_extent_state_atomic(prealloc);
if (!prealloc) {
err = -ENOMEM;
goto out;
}
err = split_state(tree, state, prealloc, end + 1);
if (err)
extent_io_tree_panic(tree, err);
set_state_bits(tree, prealloc, &bits);
cache_state(prealloc, cached_state);
clear_state_bit(tree, prealloc, &clear_bits, 0);
prealloc = NULL;
goto out;
}
goto search_again;
out:
spin_unlock(&tree->lock);
if (prealloc)
free_extent_state(prealloc);
return err;
search_again:
if (start > end)
goto out;
spin_unlock(&tree->lock);
if (mask & __GFP_WAIT)
cond_resched();
first_iteration = false;
goto again;
}
/* wrappers around set/clear extent bit */
int set_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_DIRTY, NULL,
NULL, mask);
}
int set_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, gfp_t mask)
{
return set_extent_bit(tree, start, end, bits, NULL,
NULL, mask);
}
int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, gfp_t mask)
{
int wake = 0;
if (bits & EXTENT_LOCKED)
wake = 1;
return clear_extent_bit(tree, start, end, bits, wake, 0, NULL, mask);
}
int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
struct extent_state **cached_state, gfp_t mask)
{
return set_extent_bit(tree, start, end,
EXTENT_DELALLOC | EXTENT_UPTODATE,
NULL, cached_state, mask);
}
int set_extent_defrag(struct extent_io_tree *tree, u64 start, u64 end,
struct extent_state **cached_state, gfp_t mask)
{
return set_extent_bit(tree, start, end,
EXTENT_DELALLOC | EXTENT_UPTODATE | EXTENT_DEFRAG,
NULL, cached_state, mask);
}
int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return clear_extent_bit(tree, start, end,
EXTENT_DIRTY | EXTENT_DELALLOC |
EXTENT_DO_ACCOUNTING, 0, 0, NULL, mask);
}
int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_NEW, NULL,
NULL, mask);
}
int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
struct extent_state **cached_state, gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_UPTODATE, NULL,
cached_state, mask);
}
int clear_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
struct extent_state **cached_state, gfp_t mask)
{
return clear_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, 0,
cached_state, mask);
}
/*
* either insert or lock state struct between start and end use mask to tell
* us if waiting is desired.
*/
int lock_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, struct extent_state **cached_state)
{
int err;
u64 failed_start;
while (1) {
err = __set_extent_bit(tree, start, end, EXTENT_LOCKED | bits,
EXTENT_LOCKED, &failed_start,
cached_state, GFP_NOFS);
if (err == -EEXIST) {
wait_extent_bit(tree, failed_start, end, EXTENT_LOCKED);
start = failed_start;
} else
break;
WARN_ON(start > end);
}
return err;
}
int lock_extent(struct extent_io_tree *tree, u64 start, u64 end)
{
return lock_extent_bits(tree, start, end, 0, NULL);
}
int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end)
{
int err;
u64 failed_start;
err = __set_extent_bit(tree, start, end, EXTENT_LOCKED, EXTENT_LOCKED,
&failed_start, NULL, GFP_NOFS);
if (err == -EEXIST) {
if (failed_start > start)
clear_extent_bit(tree, start, failed_start - 1,
EXTENT_LOCKED, 1, 0, NULL, GFP_NOFS);
return 0;
}
return 1;
}
int unlock_extent_cached(struct extent_io_tree *tree, u64 start, u64 end,
struct extent_state **cached, gfp_t mask)
{
return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, cached,
mask);
}
int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end)
{
return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, NULL,
GFP_NOFS);
}
int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end)
{
unsigned long index = start >> PAGE_CACHE_SHIFT;
unsigned long end_index = end >> PAGE_CACHE_SHIFT;
struct page *page;
while (index <= end_index) {
page = find_get_page(inode->i_mapping, index);
BUG_ON(!page); /* Pages should be in the extent_io_tree */
clear_page_dirty_for_io(page);
page_cache_release(page);
index++;
}
return 0;
}
int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end)
{
unsigned long index = start >> PAGE_CACHE_SHIFT;
unsigned long end_index = end >> PAGE_CACHE_SHIFT;
struct page *page;
while (index <= end_index) {
page = find_get_page(inode->i_mapping, index);
BUG_ON(!page); /* Pages should be in the extent_io_tree */
__set_page_dirty_nobuffers(page);
account_page_redirty(page);
page_cache_release(page);
index++;
}
return 0;
}
/*
* helper function to set both pages and extents in the tree writeback
*/
static int set_range_writeback(struct extent_io_tree *tree, u64 start, u64 end)
{
unsigned long index = start >> PAGE_CACHE_SHIFT;
unsigned long end_index = end >> PAGE_CACHE_SHIFT;
struct page *page;
while (index <= end_index) {
page = find_get_page(tree->mapping, index);
BUG_ON(!page); /* Pages should be in the extent_io_tree */
set_page_writeback(page);
page_cache_release(page);
index++;
}
return 0;
}
/* find the first state struct with 'bits' set after 'start', and
* return it. tree->lock must be held. NULL will returned if
* nothing was found after 'start'
*/
static struct extent_state *
find_first_extent_bit_state(struct extent_io_tree *tree,
u64 start, unsigned bits)
{
struct rb_node *node;
struct extent_state *state;
/*
* this search will find all the extents that end after
* our range starts.
*/
node = tree_search(tree, start);
if (!node)
goto out;
while (1) {
state = rb_entry(node, struct extent_state, rb_node);
if (state->end >= start && (state->state & bits))
return state;
node = rb_next(node);
if (!node)
break;
}
out:
return NULL;
}
/*
* find the first offset in the io tree with 'bits' set. zero is
* returned if we find something, and *start_ret and *end_ret are
* set to reflect the state struct that was found.
*
* If nothing was found, 1 is returned. If found something, return 0.
*/
int find_first_extent_bit(struct extent_io_tree *tree, u64 start,
u64 *start_ret, u64 *end_ret, unsigned bits,
struct extent_state **cached_state)
{
struct extent_state *state;
struct rb_node *n;
int ret = 1;
spin_lock(&tree->lock);
if (cached_state && *cached_state) {
state = *cached_state;
if (state->end == start - 1 && extent_state_in_tree(state)) {
n = rb_next(&state->rb_node);
while (n) {
state = rb_entry(n, struct extent_state,
rb_node);
if (state->state & bits)
goto got_it;
n = rb_next(n);
}
free_extent_state(*cached_state);
*cached_state = NULL;
goto out;
}
free_extent_state(*cached_state);
*cached_state = NULL;
}
state = find_first_extent_bit_state(tree, start, bits);
got_it:
if (state) {
cache_state_if_flags(state, cached_state, 0);
*start_ret = state->start;
*end_ret = state->end;
ret = 0;
}
out:
spin_unlock(&tree->lock);
return ret;
}
/*
* find a contiguous range of bytes in the file marked as delalloc, not
* more than 'max_bytes'. start and end are used to return the range,
*
* 1 is returned if we find something, 0 if nothing was in the tree
*/
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
static noinline u64 find_delalloc_range(struct extent_io_tree *tree,
u64 *start, u64 *end, u64 max_bytes,
struct extent_state **cached_state)
{
struct rb_node *node;
struct extent_state *state;
u64 cur_start = *start;
u64 found = 0;
u64 total_bytes = 0;
spin_lock(&tree->lock);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/*
* this search will find all the extents that end after
* our range starts.
*/
node = tree_search(tree, cur_start);
if (!node) {
if (!found)
*end = (u64)-1;
goto out;
}
while (1) {
state = rb_entry(node, struct extent_state, rb_node);
if (found && (state->start != cur_start ||
(state->state & EXTENT_BOUNDARY))) {
goto out;
}
if (!(state->state & EXTENT_DELALLOC)) {
if (!found)
*end = state->end;
goto out;
}
if (!found) {
*start = state->start;
*cached_state = state;
atomic_inc(&state->refs);
}
found++;
*end = state->end;
cur_start = state->end + 1;
node = rb_next(node);
total_bytes += state->end - state->start + 1;
if (total_bytes >= max_bytes)
break;
if (!node)
break;
}
out:
spin_unlock(&tree->lock);
return found;
}
static noinline void __unlock_for_delalloc(struct inode *inode,
struct page *locked_page,
u64 start, u64 end)
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
{
int ret;
struct page *pages[16];
unsigned long index = start >> PAGE_CACHE_SHIFT;
unsigned long end_index = end >> PAGE_CACHE_SHIFT;
unsigned long nr_pages = end_index - index + 1;
int i;
if (index == locked_page->index && end_index == index)
return;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
while (nr_pages > 0) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
ret = find_get_pages_contig(inode->i_mapping, index,
min_t(unsigned long, nr_pages,
ARRAY_SIZE(pages)), pages);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
for (i = 0; i < ret; i++) {
if (pages[i] != locked_page)
unlock_page(pages[i]);
page_cache_release(pages[i]);
}
nr_pages -= ret;
index += ret;
cond_resched();
}
}
static noinline int lock_delalloc_pages(struct inode *inode,
struct page *locked_page,
u64 delalloc_start,
u64 delalloc_end)
{
unsigned long index = delalloc_start >> PAGE_CACHE_SHIFT;
unsigned long start_index = index;
unsigned long end_index = delalloc_end >> PAGE_CACHE_SHIFT;
unsigned long pages_locked = 0;
struct page *pages[16];
unsigned long nrpages;
int ret;
int i;
/* the caller is responsible for locking the start index */
if (index == locked_page->index && index == end_index)
return 0;
/* skip the page at the start index */
nrpages = end_index - index + 1;
while (nrpages > 0) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
ret = find_get_pages_contig(inode->i_mapping, index,
min_t(unsigned long,
nrpages, ARRAY_SIZE(pages)), pages);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (ret == 0) {
ret = -EAGAIN;
goto done;
}
/* now we have an array of pages, lock them all */
for (i = 0; i < ret; i++) {
/*
* the caller is taking responsibility for
* locked_page
*/
if (pages[i] != locked_page) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
lock_page(pages[i]);
if (!PageDirty(pages[i]) ||
pages[i]->mapping != inode->i_mapping) {
ret = -EAGAIN;
unlock_page(pages[i]);
page_cache_release(pages[i]);
goto done;
}
}
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
page_cache_release(pages[i]);
pages_locked++;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
}
nrpages -= ret;
index += ret;
cond_resched();
}
ret = 0;
done:
if (ret && pages_locked) {
__unlock_for_delalloc(inode, locked_page,
delalloc_start,
((u64)(start_index + pages_locked - 1)) <<
PAGE_CACHE_SHIFT);
}
return ret;
}
/*
* find a contiguous range of bytes in the file marked as delalloc, not
* more than 'max_bytes'. start and end are used to return the range,
*
* 1 is returned if we find something, 0 if nothing was in the tree
*/
STATIC u64 find_lock_delalloc_range(struct inode *inode,
struct extent_io_tree *tree,
struct page *locked_page, u64 *start,
u64 *end, u64 max_bytes)
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
{
u64 delalloc_start;
u64 delalloc_end;
u64 found;
struct extent_state *cached_state = NULL;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
int ret;
int loops = 0;
again:
/* step one, find a bunch of delalloc bytes starting at start */
delalloc_start = *start;
delalloc_end = 0;
found = find_delalloc_range(tree, &delalloc_start, &delalloc_end,
max_bytes, &cached_state);
if (!found || delalloc_end <= *start) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
*start = delalloc_start;
*end = delalloc_end;
free_extent_state(cached_state);
Btrfs: fix crash of compressed writes The crash[1] is found by xfstests/generic/208 with "-o compress", it's not reproduced everytime, but it does panic. The bug is quite interesting, it's actually introduced by a recent commit (573aecafca1cf7a974231b759197a1aebcf39c2a, Btrfs: actually limit the size of delalloc range). Btrfs implements delay allocation, so during writeback, we (1) get a page A and lock it (2) search the state tree for delalloc bytes and lock all pages within the range (3) process the delalloc range, including find disk space and create ordered extent and so on. (4) submit the page A. It runs well in normal cases, but if we're in a racy case, eg. buffered compressed writes and aio-dio writes, sometimes we may fail to lock all pages in the 'delalloc' range, in which case, we need to fall back to search the state tree again with a smaller range limit(max_bytes = PAGE_CACHE_SIZE - offset). The mentioned commit has a side effect, that is, in the fallback case, we can find delalloc bytes before the index of the page we already have locked, so we're in the case of (delalloc_end <= *start) and return with (found > 0). This ends with not locking delalloc pages but making ->writepage still process them, and the crash happens. This fixes it by just thinking that we find nothing and returning to caller as the caller knows how to deal with it properly. [1]: ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2170! [...] CPU: 2 PID: 11755 Comm: btrfs-delalloc- Tainted: G O 3.11.0+ #8 [...] RIP: 0010:[<ffffffff810f5093>] [<ffffffff810f5093>] clear_page_dirty_for_io+0x1e/0x83 [...] [ 4934.248731] Stack: [ 4934.248731] ffff8801477e5dc8 ffffea00049b9f00 ffff8801869f9ce8 ffffffffa02b841a [ 4934.248731] 0000000000000000 0000000000000000 0000000000000fff 0000000000000620 [ 4934.248731] ffff88018db59c78 ffffea0005da8d40 ffffffffa02ff860 00000001810016c0 [ 4934.248731] Call Trace: [ 4934.248731] [<ffffffffa02b841a>] extent_range_clear_dirty_for_io+0xcf/0xf5 [btrfs] [ 4934.248731] [<ffffffffa02a8889>] compress_file_range+0x1dc/0x4cb [btrfs] [ 4934.248731] [<ffffffff8104f7af>] ? detach_if_pending+0x22/0x4b [ 4934.248731] [<ffffffffa02a8bad>] async_cow_start+0x35/0x53 [btrfs] [ 4934.248731] [<ffffffffa02c694b>] worker_loop+0x14b/0x48c [btrfs] [ 4934.248731] [<ffffffffa02c6800>] ? btrfs_queue_worker+0x25c/0x25c [btrfs] [ 4934.248731] [<ffffffff810608f5>] kthread+0x8d/0x95 [ 4934.248731] [<ffffffff81060868>] ? kthread_freezable_should_stop+0x43/0x43 [ 4934.248731] [<ffffffff814fe09c>] ret_from_fork+0x7c/0xb0 [ 4934.248731] [<ffffffff81060868>] ? kthread_freezable_should_stop+0x43/0x43 [ 4934.248731] Code: ff 85 c0 0f 94 c0 0f b6 c0 59 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 2c de 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 52 49 8b 84 24 80 00 00 00 f6 40 20 01 75 44 [ 4934.248731] RIP [<ffffffff810f5093>] clear_page_dirty_for_io+0x1e/0x83 [ 4934.248731] RSP <ffff8801869f9c48> [ 4934.280307] ---[ end trace 36f06d3f8750236a ]--- Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-10-01 17:49:49 +02:00
return 0;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
}
/*
* start comes from the offset of locked_page. We have to lock
* pages in order, so we can't process delalloc bytes before
* locked_page
*/
if (delalloc_start < *start)
delalloc_start = *start;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/*
* make sure to limit the number of pages we try to lock down
*/
if (delalloc_end + 1 - delalloc_start > max_bytes)
delalloc_end = delalloc_start + max_bytes - 1;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/* step two, lock all the pages after the page that has start */
ret = lock_delalloc_pages(inode, locked_page,
delalloc_start, delalloc_end);
if (ret == -EAGAIN) {
/* some of the pages are gone, lets avoid looping by
* shortening the size of the delalloc range we're searching
*/
free_extent_state(cached_state);
cached_state = NULL;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (!loops) {
max_bytes = PAGE_CACHE_SIZE;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
loops = 1;
goto again;
} else {
found = 0;
goto out_failed;
}
}
BUG_ON(ret); /* Only valid values are 0 and -EAGAIN */
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/* step three, lock the state bits for the whole range */
lock_extent_bits(tree, delalloc_start, delalloc_end, 0, &cached_state);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/* then test to make sure it is all still delalloc */
ret = test_range_bit(tree, delalloc_start, delalloc_end,
EXTENT_DELALLOC, 1, cached_state);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (!ret) {
unlock_extent_cached(tree, delalloc_start, delalloc_end,
&cached_state, GFP_NOFS);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
__unlock_for_delalloc(inode, locked_page,
delalloc_start, delalloc_end);
cond_resched();
goto again;
}
free_extent_state(cached_state);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
*start = delalloc_start;
*end = delalloc_end;
out_failed:
return found;
}
int extent_clear_unlock_delalloc(struct inode *inode, u64 start, u64 end,
struct page *locked_page,
unsigned clear_bits,
unsigned long page_ops)
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
{
struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
int ret;
struct page *pages[16];
unsigned long index = start >> PAGE_CACHE_SHIFT;
unsigned long end_index = end >> PAGE_CACHE_SHIFT;
unsigned long nr_pages = end_index - index + 1;
int i;
clear_extent_bit(tree, start, end, clear_bits, 1, 0, NULL, GFP_NOFS);
if (page_ops == 0)
return 0;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if ((page_ops & PAGE_SET_ERROR) && nr_pages > 0)
mapping_set_error(inode->i_mapping, -EIO);
while (nr_pages > 0) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
ret = find_get_pages_contig(inode->i_mapping, index,
min_t(unsigned long,
nr_pages, ARRAY_SIZE(pages)), pages);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
for (i = 0; i < ret; i++) {
if (page_ops & PAGE_SET_PRIVATE2)
SetPagePrivate2(pages[i]);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (pages[i] == locked_page) {
page_cache_release(pages[i]);
continue;
}
if (page_ops & PAGE_CLEAR_DIRTY)
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
clear_page_dirty_for_io(pages[i]);
if (page_ops & PAGE_SET_WRITEBACK)
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
set_page_writeback(pages[i]);
if (page_ops & PAGE_SET_ERROR)
SetPageError(pages[i]);
if (page_ops & PAGE_END_WRITEBACK)
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
end_page_writeback(pages[i]);
if (page_ops & PAGE_UNLOCK)
unlock_page(pages[i]);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
page_cache_release(pages[i]);
}
nr_pages -= ret;
index += ret;
cond_resched();
}
return 0;
}
/*
* count the number of bytes in the tree that have a given bit(s)
* set. This can be fairly slow, except for EXTENT_DIRTY which is
* cached. The total number found is returned.
*/
u64 count_range_bits(struct extent_io_tree *tree,
u64 *start, u64 search_end, u64 max_bytes,
unsigned bits, int contig)
{
struct rb_node *node;
struct extent_state *state;
u64 cur_start = *start;
u64 total_bytes = 0;
u64 last = 0;
int found = 0;
if (WARN_ON(search_end <= cur_start))
return 0;
spin_lock(&tree->lock);
if (cur_start == 0 && bits == EXTENT_DIRTY) {
total_bytes = tree->dirty_bytes;
goto out;
}
/*
* this search will find all the extents that end after
* our range starts.
*/
node = tree_search(tree, cur_start);
if (!node)
goto out;
while (1) {
state = rb_entry(node, struct extent_state, rb_node);
if (state->start > search_end)
break;
if (contig && found && state->start > last + 1)
break;
if (state->end >= cur_start && (state->state & bits) == bits) {
total_bytes += min(search_end, state->end) + 1 -
max(cur_start, state->start);
if (total_bytes >= max_bytes)
break;
if (!found) {
*start = max(cur_start, state->start);
found = 1;
}
last = state->end;
} else if (contig && found) {
break;
}
node = rb_next(node);
if (!node)
break;
}
out:
spin_unlock(&tree->lock);
return total_bytes;
}
/*
* set the private field for a given byte offset in the tree. If there isn't
* an extent_state there already, this does nothing.
*/
static int set_state_private(struct extent_io_tree *tree, u64 start, u64 private)
{
struct rb_node *node;
struct extent_state *state;
int ret = 0;
spin_lock(&tree->lock);
/*
* this search will find all the extents that end after
* our range starts.
*/
node = tree_search(tree, start);
if (!node) {
ret = -ENOENT;
goto out;
}
state = rb_entry(node, struct extent_state, rb_node);
if (state->start != start) {
ret = -ENOENT;
goto out;
}
state->private = private;
out:
spin_unlock(&tree->lock);
return ret;
}
int get_state_private(struct extent_io_tree *tree, u64 start, u64 *private)
{
struct rb_node *node;
struct extent_state *state;
int ret = 0;
spin_lock(&tree->lock);
/*
* this search will find all the extents that end after
* our range starts.
*/
node = tree_search(tree, start);
if (!node) {
ret = -ENOENT;
goto out;
}
state = rb_entry(node, struct extent_state, rb_node);
if (state->start != start) {
ret = -ENOENT;
goto out;
}
*private = state->private;
out:
spin_unlock(&tree->lock);
return ret;
}
/*
* searches a range in the state tree for a given mask.
* If 'filled' == 1, this returns 1 only if every extent in the tree
* has the bits set. Otherwise, 1 is returned if any bit in the
* range is found set.
*/
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
unsigned bits, int filled, struct extent_state *cached)
{
struct extent_state *state = NULL;
struct rb_node *node;
int bitset = 0;
spin_lock(&tree->lock);
if (cached && extent_state_in_tree(cached) && cached->start <= start &&
cached->end > start)
node = &cached->rb_node;
else
node = tree_search(tree, start);
while (node && start <= end) {
state = rb_entry(node, struct extent_state, rb_node);
if (filled && state->start > start) {
bitset = 0;
break;
}
if (state->start > end)
break;
if (state->state & bits) {
bitset = 1;
if (!filled)
break;
} else if (filled) {
bitset = 0;
break;
}
if (state->end == (u64)-1)
break;
start = state->end + 1;
if (start > end)
break;
node = rb_next(node);
if (!node) {
if (filled)
bitset = 0;
break;
}
}
spin_unlock(&tree->lock);
return bitset;
}
/*
* helper function to set a given page up to date if all the
* extents in the tree for that page are up to date
*/
static void check_page_uptodate(struct extent_io_tree *tree, struct page *page)
{
u64 start = page_offset(page);
u64 end = start + PAGE_CACHE_SIZE - 1;
if (test_range_bit(tree, start, end, EXTENT_UPTODATE, 1, NULL))
SetPageUptodate(page);
}
int free_io_failure(struct inode *inode, struct io_failure_record *rec)
{
int ret;
int err = 0;
struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
set_state_private(failure_tree, rec->start, 0);
ret = clear_extent_bits(failure_tree, rec->start,
rec->start + rec->len - 1,
EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
if (ret)
err = ret;
ret = clear_extent_bits(&BTRFS_I(inode)->io_tree, rec->start,
rec->start + rec->len - 1,
EXTENT_DAMAGED, GFP_NOFS);
if (ret && !err)
err = ret;
kfree(rec);
return err;
}
/*
* this bypasses the standard btrfs submit functions deliberately, as
* the standard behavior is to write all copies in a raid setup. here we only
* want to write the one bad copy. so we do the mapping for ourselves and issue
* submit_bio directly.
* to avoid any synchronization issues, wait for the data after writing, which
* actually prevents the read that triggered the error from finishing.
* currently, there can be no more than two copies of every data bit. thus,
* exactly one rewrite is required.
*/
int repair_io_failure(struct inode *inode, u64 start, u64 length, u64 logical,
struct page *page, unsigned int pg_offset, int mirror_num)
{
struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
struct bio *bio;
struct btrfs_device *dev;
u64 map_length = 0;
u64 sector;
struct btrfs_bio *bbio = NULL;
struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree;
int ret;
ASSERT(!(fs_info->sb->s_flags & MS_RDONLY));
BUG_ON(!mirror_num);
/* we can't repair anything in raid56 yet */
if (btrfs_is_parity_mirror(map_tree, logical, length, mirror_num))
return 0;
bio = btrfs_io_bio_alloc(GFP_NOFS, 1);
if (!bio)
return -EIO;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 00:44:27 +02:00
bio->bi_iter.bi_size = 0;
map_length = length;
ret = btrfs_map_block(fs_info, WRITE, logical,
&map_length, &bbio, mirror_num);
if (ret) {
bio_put(bio);
return -EIO;
}
BUG_ON(mirror_num != bbio->mirror_num);
sector = bbio->stripes[mirror_num-1].physical >> 9;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 00:44:27 +02:00
bio->bi_iter.bi_sector = sector;
dev = bbio->stripes[mirror_num-1].dev;
btrfs_put_bbio(bbio);
if (!dev || !dev->bdev || !dev->writeable) {
bio_put(bio);
return -EIO;
}
bio->bi_bdev = dev->bdev;
bio_add_page(bio, page, length, pg_offset);
if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) {
/* try to remap that extent elsewhere? */
bio_put(bio);
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS);
return -EIO;
}
printk_ratelimited_in_rcu(KERN_INFO
"BTRFS: read error corrected: ino %llu off %llu (dev %s sector %llu)\n",
btrfs_ino(inode), start,
rcu_str_deref(dev->name), sector);
bio_put(bio);
return 0;
}
int repair_eb_io_failure(struct btrfs_root *root, struct extent_buffer *eb,
int mirror_num)
{
u64 start = eb->start;
unsigned long i, num_pages = num_extent_pages(eb->start, eb->len);
int ret = 0;
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
for (i = 0; i < num_pages; i++) {
struct page *p = eb->pages[i];
ret = repair_io_failure(root->fs_info->btree_inode, start,
PAGE_CACHE_SIZE, start, p,
start - page_offset(p), mirror_num);
if (ret)
break;
start += PAGE_CACHE_SIZE;
}
return ret;
}
/*
* each time an IO finishes, we do a fast check in the IO failure tree
* to see if we need to process or clean up an io_failure_record
*/
int clean_io_failure(struct inode *inode, u64 start, struct page *page,
unsigned int pg_offset)
{
u64 private;
u64 private_failure;
struct io_failure_record *failrec;
struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
struct extent_state *state;
int num_copies;
int ret;
private = 0;
ret = count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private,
(u64)-1, 1, EXTENT_DIRTY, 0);
if (!ret)
return 0;
ret = get_state_private(&BTRFS_I(inode)->io_failure_tree, start,
&private_failure);
if (ret)
return 0;
failrec = (struct io_failure_record *)(unsigned long) private_failure;
BUG_ON(!failrec->this_mirror);
if (failrec->in_validation) {
/* there was no real error, just free the record */
pr_debug("clean_io_failure: freeing dummy error at %llu\n",
failrec->start);
goto out;
}
if (fs_info->sb->s_flags & MS_RDONLY)
goto out;
spin_lock(&BTRFS_I(inode)->io_tree.lock);
state = find_first_extent_bit_state(&BTRFS_I(inode)->io_tree,
failrec->start,
EXTENT_LOCKED);
spin_unlock(&BTRFS_I(inode)->io_tree.lock);
if (state && state->start <= failrec->start &&
state->end >= failrec->start + failrec->len - 1) {
num_copies = btrfs_num_copies(fs_info, failrec->logical,
failrec->len);
if (num_copies > 1) {
repair_io_failure(inode, start, failrec->len,
failrec->logical, page,
pg_offset, failrec->failed_mirror);
}
}
out:
free_io_failure(inode, failrec);
return 0;
}
/*
* Can be called when
* - hold extent lock
* - under ordered extent
* - the inode is freeing
*/
void btrfs_free_io_failure_record(struct inode *inode, u64 start, u64 end)
{
struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
struct io_failure_record *failrec;
struct extent_state *state, *next;
if (RB_EMPTY_ROOT(&failure_tree->state))
return;
spin_lock(&failure_tree->lock);
state = find_first_extent_bit_state(failure_tree, start, EXTENT_DIRTY);
while (state) {
if (state->start > end)
break;
ASSERT(state->end <= end);
next = next_state(state);
failrec = (struct io_failure_record *)(unsigned long)state->private;
free_extent_state(state);
kfree(failrec);
state = next;
}
spin_unlock(&failure_tree->lock);
}
int btrfs_get_io_failure_record(struct inode *inode, u64 start, u64 end,
struct io_failure_record **failrec_ret)
{
struct io_failure_record *failrec;
u64 private;
struct extent_map *em;
struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
int ret;
u64 logical;
ret = get_state_private(failure_tree, start, &private);
if (ret) {
failrec = kzalloc(sizeof(*failrec), GFP_NOFS);
if (!failrec)
return -ENOMEM;
failrec->start = start;
failrec->len = end - start + 1;
failrec->this_mirror = 0;
failrec->bio_flags = 0;
failrec->in_validation = 0;
read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, failrec->len);
if (!em) {
read_unlock(&em_tree->lock);
kfree(failrec);
return -EIO;
}
if (em->start > start || em->start + em->len <= start) {
free_extent_map(em);
em = NULL;
}
read_unlock(&em_tree->lock);
if (!em) {
kfree(failrec);
return -EIO;
}
logical = start - em->start;
logical = em->block_start + logical;
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
logical = em->block_start;
failrec->bio_flags = EXTENT_BIO_COMPRESSED;
extent_set_compress_type(&failrec->bio_flags,
em->compress_type);
}
pr_debug("Get IO Failure Record: (new) logical=%llu, start=%llu, len=%llu\n",
logical, start, failrec->len);
failrec->logical = logical;
free_extent_map(em);
/* set the bits in the private failure tree */
ret = set_extent_bits(failure_tree, start, end,
EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
if (ret >= 0)
ret = set_state_private(failure_tree, start,
(u64)(unsigned long)failrec);
/* set the bits in the inode's tree */
if (ret >= 0)
ret = set_extent_bits(tree, start, end, EXTENT_DAMAGED,
GFP_NOFS);
if (ret < 0) {
kfree(failrec);
return ret;
}
} else {
failrec = (struct io_failure_record *)(unsigned long)private;
pr_debug("Get IO Failure Record: (found) logical=%llu, start=%llu, len=%llu, validation=%d\n",
failrec->logical, failrec->start, failrec->len,
failrec->in_validation);
/*
* when data can be on disk more than twice, add to failrec here
* (e.g. with a list for failed_mirror) to make
* clean_io_failure() clean all those errors at once.
*/
}
*failrec_ret = failrec;
return 0;
}
int btrfs_check_repairable(struct inode *inode, struct bio *failed_bio,
struct io_failure_record *failrec, int failed_mirror)
{
int num_copies;
num_copies = btrfs_num_copies(BTRFS_I(inode)->root->fs_info,
failrec->logical, failrec->len);
if (num_copies == 1) {
/*
* we only have a single copy of the data, so don't bother with
* all the retry and error correction code that follows. no
* matter what the error is, it is very likely to persist.
*/
pr_debug("Check Repairable: cannot repair, num_copies=%d, next_mirror %d, failed_mirror %d\n",
num_copies, failrec->this_mirror, failed_mirror);
return 0;
}
/*
* there are two premises:
* a) deliver good data to the caller
* b) correct the bad sectors on disk
*/
if (failed_bio->bi_vcnt > 1) {
/*
* to fulfill b), we need to know the exact failing sectors, as
* we don't want to rewrite any more than the failed ones. thus,
* we need separate read requests for the failed bio
*
* if the following BUG_ON triggers, our validation request got
* merged. we need separate requests for our algorithm to work.
*/
BUG_ON(failrec->in_validation);
failrec->in_validation = 1;
failrec->this_mirror = failed_mirror;
} else {
/*
* we're ready to fulfill a) and b) alongside. get a good copy
* of the failed sector and if we succeed, we have setup
* everything for repair_io_failure to do the rest for us.
*/
if (failrec->in_validation) {
BUG_ON(failrec->this_mirror != failed_mirror);
failrec->in_validation = 0;
failrec->this_mirror = 0;
}
failrec->failed_mirror = failed_mirror;
failrec->this_mirror++;
if (failrec->this_mirror == failed_mirror)
failrec->this_mirror++;
}
if (failrec->this_mirror > num_copies) {
pr_debug("Check Repairable: (fail) num_copies=%d, next_mirror %d, failed_mirror %d\n",
num_copies, failrec->this_mirror, failed_mirror);
return 0;
}
return 1;
}
struct bio *btrfs_create_repair_bio(struct inode *inode, struct bio *failed_bio,
struct io_failure_record *failrec,
struct page *page, int pg_offset, int icsum,
bio_end_io_t *endio_func, void *data)
{
struct bio *bio;
struct btrfs_io_bio *btrfs_failed_bio;
struct btrfs_io_bio *btrfs_bio;
bio = btrfs_io_bio_alloc(GFP_NOFS, 1);
if (!bio)
return NULL;
bio->bi_end_io = endio_func;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 00:44:27 +02:00
bio->bi_iter.bi_sector = failrec->logical >> 9;
bio->bi_bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 00:44:27 +02:00
bio->bi_iter.bi_size = 0;
bio->bi_private = data;
btrfs_failed_bio = btrfs_io_bio(failed_bio);
if (btrfs_failed_bio->csum) {
struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
u16 csum_size = btrfs_super_csum_size(fs_info->super_copy);
btrfs_bio = btrfs_io_bio(bio);
btrfs_bio->csum = btrfs_bio->csum_inline;
icsum *= csum_size;
memcpy(btrfs_bio->csum, btrfs_failed_bio->csum + icsum,
csum_size);
}
bio_add_page(bio, page, failrec->len, pg_offset);
return bio;
}
/*
* this is a generic handler for readpage errors (default
* readpage_io_failed_hook). if other copies exist, read those and write back
* good data to the failed position. does not investigate in remapping the
* failed extent elsewhere, hoping the device will be smart enough to do this as
* needed
*/
static int bio_readpage_error(struct bio *failed_bio, u64 phy_offset,
struct page *page, u64 start, u64 end,
int failed_mirror)
{
struct io_failure_record *failrec;
struct inode *inode = page->mapping->host;
struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
struct bio *bio;
int read_mode;
int ret;
BUG_ON(failed_bio->bi_rw & REQ_WRITE);
ret = btrfs_get_io_failure_record(inode, start, end, &failrec);
if (ret)
return ret;
ret = btrfs_check_repairable(inode, failed_bio, failrec, failed_mirror);
if (!ret) {
free_io_failure(inode, failrec);
return -EIO;
}
if (failed_bio->bi_vcnt > 1)
read_mode = READ_SYNC | REQ_FAILFAST_DEV;
else
read_mode = READ_SYNC;
phy_offset >>= inode->i_sb->s_blocksize_bits;
bio = btrfs_create_repair_bio(inode, failed_bio, failrec, page,
start - page_offset(page),
(int)phy_offset, failed_bio->bi_end_io,
NULL);
if (!bio) {
free_io_failure(inode, failrec);
return -EIO;
}
pr_debug("Repair Read Error: submitting new read[%#x] to this_mirror=%d, in_validation=%d\n",
read_mode, failrec->this_mirror, failrec->in_validation);
ret = tree->ops->submit_bio_hook(inode, read_mode, bio,
failrec->this_mirror,
failrec->bio_flags, 0);
if (ret) {
free_io_failure(inode, failrec);
bio_put(bio);
}
return ret;
}
/* lots and lots of room for performance fixes in the end_bio funcs */
int end_extent_writepage(struct page *page, int err, u64 start, u64 end)
{
int uptodate = (err == 0);
struct extent_io_tree *tree;
int ret = 0;
tree = &BTRFS_I(page->mapping->host)->io_tree;
if (tree->ops && tree->ops->writepage_end_io_hook) {
ret = tree->ops->writepage_end_io_hook(page, start,
end, NULL, uptodate);
if (ret)
uptodate = 0;
}
if (!uptodate) {
ClearPageUptodate(page);
SetPageError(page);
ret = ret < 0 ? ret : -EIO;
mapping_set_error(page->mapping, ret);
}
return 0;
}
/*
* after a writepage IO is done, we need to:
* clear the uptodate bits on error
* clear the writeback bits in the extent tree for this IO
* end_page_writeback if the page has no more pending IO
*
* Scheduling is not allowed, so the extent state tree is expected
* to have one and only one object corresponding to this IO.
*/
static void end_bio_extent_writepage(struct bio *bio, int err)
{
struct bio_vec *bvec;
u64 start;
u64 end;
int i;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
/* We always issue full-page reads, but if some block
* in a page fails to read, blk_update_request() will
* advance bv_offset and adjust bv_len to compensate.
* Print a warning for nonzero offsets, and an error
* if they don't add up to a full page. */
if (bvec->bv_offset || bvec->bv_len != PAGE_CACHE_SIZE) {
if (bvec->bv_offset + bvec->bv_len != PAGE_CACHE_SIZE)
btrfs_err(BTRFS_I(page->mapping->host)->root->fs_info,
"partial page write in btrfs with offset %u and length %u",
bvec->bv_offset, bvec->bv_len);
else
btrfs_info(BTRFS_I(page->mapping->host)->root->fs_info,
"incomplete page write in btrfs with offset %u and "
"length %u",
bvec->bv_offset, bvec->bv_len);
}
start = page_offset(page);
end = start + bvec->bv_offset + bvec->bv_len - 1;
if (end_extent_writepage(page, err, start, end))
continue;
end_page_writeback(page);
}
bio_put(bio);
}
static void
endio_readpage_release_extent(struct extent_io_tree *tree, u64 start, u64 len,
int uptodate)
{
struct extent_state *cached = NULL;
u64 end = start + len - 1;
if (uptodate && tree->track_uptodate)
set_extent_uptodate(tree, start, end, &cached, GFP_ATOMIC);
unlock_extent_cached(tree, start, end, &cached, GFP_ATOMIC);
}
/*
* after a readpage IO is done, we need to:
* clear the uptodate bits on error
* set the uptodate bits if things worked
* set the page up to date if all extents in the tree are uptodate
* clear the lock bit in the extent tree
* unlock the page if there are no other extents locked for it
*
* Scheduling is not allowed, so the extent state tree is expected
* to have one and only one object corresponding to this IO.
*/
static void end_bio_extent_readpage(struct bio *bio, int err)
{
struct bio_vec *bvec;
int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
struct btrfs_io_bio *io_bio = btrfs_io_bio(bio);
struct extent_io_tree *tree;
u64 offset = 0;
u64 start;
u64 end;
u64 len;
u64 extent_start = 0;
u64 extent_len = 0;
int mirror;
int ret;
int i;
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-08 22:58:54 +01:00
if (err)
uptodate = 0;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
struct inode *inode = page->mapping->host;
pr_debug("end_bio_extent_readpage: bi_sector=%llu, err=%d, "
"mirror=%u\n", (u64)bio->bi_iter.bi_sector, err,
io_bio->mirror_num);
tree = &BTRFS_I(inode)->io_tree;
/* We always issue full-page reads, but if some block
* in a page fails to read, blk_update_request() will
* advance bv_offset and adjust bv_len to compensate.
* Print a warning for nonzero offsets, and an error
* if they don't add up to a full page. */
if (bvec->bv_offset || bvec->bv_len != PAGE_CACHE_SIZE) {
if (bvec->bv_offset + bvec->bv_len != PAGE_CACHE_SIZE)
btrfs_err(BTRFS_I(page->mapping->host)->root->fs_info,
"partial page read in btrfs with offset %u and length %u",
bvec->bv_offset, bvec->bv_len);
else
btrfs_info(BTRFS_I(page->mapping->host)->root->fs_info,
"incomplete page read in btrfs with offset %u and "
"length %u",
bvec->bv_offset, bvec->bv_len);
}
start = page_offset(page);
end = start + bvec->bv_offset + bvec->bv_len - 1;
len = bvec->bv_len;
mirror = io_bio->mirror_num;
if (likely(uptodate && tree->ops &&
tree->ops->readpage_end_io_hook)) {
ret = tree->ops->readpage_end_io_hook(io_bio, offset,
page, start, end,
mirror);
if (ret)
uptodate = 0;
else
clean_io_failure(inode, start, page, 0);
}
if (likely(uptodate))
goto readpage_ok;
if (tree->ops && tree->ops->readpage_io_failed_hook) {
ret = tree->ops->readpage_io_failed_hook(page, mirror);
if (!ret && !err &&
test_bit(BIO_UPTODATE, &bio->bi_flags))
uptodate = 1;
} else {
/*
* The generic bio_readpage_error handles errors the
* following way: If possible, new read requests are
* created and submitted and will end up in
* end_bio_extent_readpage as well (if we're lucky, not
* in the !uptodate case). In that case it returns 0 and
* we just go on with the next page in our bio. If it
* can't handle the error it will return -EIO and we
* remain responsible for that page.
*/
ret = bio_readpage_error(bio, offset, page, start, end,
mirror);
if (ret == 0) {
uptodate =
test_bit(BIO_UPTODATE, &bio->bi_flags);
Btrfs: move data checksumming into a dedicated tree Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-08 22:58:54 +01:00
if (err)
uptodate = 0;
offset += len;
continue;
}
}
readpage_ok:
if (likely(uptodate)) {
loff_t i_size = i_size_read(inode);
pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT;
unsigned off;
/* Zero out the end if this page straddles i_size */
off = i_size & (PAGE_CACHE_SIZE-1);
if (page->index == end_index && off)
zero_user_segment(page, off, PAGE_CACHE_SIZE);
SetPageUptodate(page);
} else {
ClearPageUptodate(page);
SetPageError(page);
}
unlock_page(page);
offset += len;
if (unlikely(!uptodate)) {
if (extent_len) {
endio_readpage_release_extent(tree,
extent_start,
extent_len, 1);
extent_start = 0;
extent_len = 0;
}
endio_readpage_release_extent(tree, start,
end - start + 1, 0);
} else if (!extent_len) {
extent_start = start;
extent_len = end + 1 - start;
} else if (extent_start + extent_len == start) {
extent_len += end + 1 - start;
} else {
endio_readpage_release_extent(tree, extent_start,
extent_len, uptodate);
extent_start = start;
extent_len = end + 1 - start;
}
}
if (extent_len)
endio_readpage_release_extent(tree, extent_start, extent_len,
uptodate);
if (io_bio->end_io)
io_bio->end_io(io_bio, err);
bio_put(bio);
}
/*
* this allocates from the btrfs_bioset. We're returning a bio right now
* but you can call btrfs_io_bio for the appropriate container_of magic
*/
struct bio *
btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
gfp_t gfp_flags)
{
struct btrfs_io_bio *btrfs_bio;
struct bio *bio;
bio = bio_alloc_bioset(gfp_flags, nr_vecs, btrfs_bioset);
if (bio == NULL && (current->flags & PF_MEMALLOC)) {
while (!bio && (nr_vecs /= 2)) {
bio = bio_alloc_bioset(gfp_flags,
nr_vecs, btrfs_bioset);
}
}
if (bio) {
bio->bi_bdev = bdev;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 00:44:27 +02:00
bio->bi_iter.bi_sector = first_sector;
btrfs_bio = btrfs_io_bio(bio);
btrfs_bio->csum = NULL;
btrfs_bio->csum_allocated = NULL;
btrfs_bio->end_io = NULL;
}
return bio;
}
struct bio *btrfs_bio_clone(struct bio *bio, gfp_t gfp_mask)
{
struct btrfs_io_bio *btrfs_bio;
struct bio *new;
new = bio_clone_bioset(bio, gfp_mask, btrfs_bioset);
if (new) {
btrfs_bio = btrfs_io_bio(new);
btrfs_bio->csum = NULL;
btrfs_bio->csum_allocated = NULL;
btrfs_bio->end_io = NULL;
}
return new;
}
/* this also allocates from the btrfs_bioset */
struct bio *btrfs_io_bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
struct btrfs_io_bio *btrfs_bio;
struct bio *bio;
bio = bio_alloc_bioset(gfp_mask, nr_iovecs, btrfs_bioset);
if (bio) {
btrfs_bio = btrfs_io_bio(bio);
btrfs_bio->csum = NULL;
btrfs_bio->csum_allocated = NULL;
btrfs_bio->end_io = NULL;
}
return bio;
}
static int __must_check submit_one_bio(int rw, struct bio *bio,
int mirror_num, unsigned long bio_flags)
{
int ret = 0;
struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
struct page *page = bvec->bv_page;
struct extent_io_tree *tree = bio->bi_private;
u64 start;
start = page_offset(page) + bvec->bv_offset;
bio->bi_private = NULL;
bio_get(bio);
if (tree->ops && tree->ops->submit_bio_hook)
ret = tree->ops->submit_bio_hook(page->mapping->host, rw, bio,
mirror_num, bio_flags, start);
else
btrfsic_submit_bio(rw, bio);
bio_put(bio);
return ret;
}
static int merge_bio(int rw, struct extent_io_tree *tree, struct page *page,
unsigned long offset, size_t size, struct bio *bio,
unsigned long bio_flags)
{
int ret = 0;
if (tree->ops && tree->ops->merge_bio_hook)
ret = tree->ops->merge_bio_hook(rw, page, offset, size, bio,
bio_flags);
BUG_ON(ret < 0);
return ret;
}
static int submit_extent_page(int rw, struct extent_io_tree *tree,
struct page *page, sector_t sector,
size_t size, unsigned long offset,
struct block_device *bdev,
struct bio **bio_ret,
unsigned long max_pages,
bio_end_io_t end_io_func,
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
int mirror_num,
unsigned long prev_bio_flags,
unsigned long bio_flags)
{
int ret = 0;
struct bio *bio;
int nr;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
int contig = 0;
int this_compressed = bio_flags & EXTENT_BIO_COMPRESSED;
int old_compressed = prev_bio_flags & EXTENT_BIO_COMPRESSED;
size_t page_size = min_t(size_t, size, PAGE_CACHE_SIZE);
if (bio_ret && *bio_ret) {
bio = *bio_ret;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (old_compressed)
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 00:44:27 +02:00
contig = bio->bi_iter.bi_sector == sector;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
else
contig = bio_end_sector(bio) == sector;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (prev_bio_flags != bio_flags || !contig ||
merge_bio(rw, tree, page, offset, page_size, bio, bio_flags) ||
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
bio_add_page(bio, page, page_size, offset) < page_size) {
ret = submit_one_bio(rw, bio, mirror_num,
prev_bio_flags);
if (ret < 0) {
*bio_ret = NULL;
return ret;
}
bio = NULL;
} else {
return 0;
}
}
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (this_compressed)
nr = BIO_MAX_PAGES;
else
nr = bio_get_nr_vecs(bdev);
bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
if (!bio)
return -ENOMEM;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
bio_add_page(bio, page, page_size, offset);
bio->bi_end_io = end_io_func;
bio->bi_private = tree;
if (bio_ret)
*bio_ret = bio;
else
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
ret = submit_one_bio(rw, bio, mirror_num, bio_flags);
return ret;
}
static void attach_extent_buffer_page(struct extent_buffer *eb,
struct page *page)
{
if (!PagePrivate(page)) {
SetPagePrivate(page);
page_cache_get(page);
set_page_private(page, (unsigned long)eb);
} else {
WARN_ON(page->private != (unsigned long)eb);
}
}
void set_page_extent_mapped(struct page *page)
{
if (!PagePrivate(page)) {
SetPagePrivate(page);
page_cache_get(page);
set_page_private(page, EXTENT_PAGE_PRIVATE);
}
}
static struct extent_map *
__get_extent_map(struct inode *inode, struct page *page, size_t pg_offset,
u64 start, u64 len, get_extent_t *get_extent,
struct extent_map **em_cached)
{
struct extent_map *em;
if (em_cached && *em_cached) {
em = *em_cached;
if (extent_map_in_tree(em) && start >= em->start &&
start < extent_map_end(em)) {
atomic_inc(&em->refs);
return em;
}
free_extent_map(em);
*em_cached = NULL;
}
em = get_extent(inode, page, pg_offset, start, len, 0);
if (em_cached && !IS_ERR_OR_NULL(em)) {
BUG_ON(*em_cached);
atomic_inc(&em->refs);
*em_cached = em;
}
return em;
}
/*
* basic readpage implementation. Locked extent state structs are inserted
* into the tree that are removed when the IO is done (by the end_io
* handlers)
* XXX JDM: This needs looking at to ensure proper page locking
*/
static int __do_readpage(struct extent_io_tree *tree,
struct page *page,
get_extent_t *get_extent,
struct extent_map **em_cached,
struct bio **bio, int mirror_num,
unsigned long *bio_flags, int rw)
{
struct inode *inode = page->mapping->host;
u64 start = page_offset(page);
u64 page_end = start + PAGE_CACHE_SIZE - 1;
u64 end;
u64 cur = start;
u64 extent_offset;
u64 last_byte = i_size_read(inode);
u64 block_start;
u64 cur_end;
sector_t sector;
struct extent_map *em;
struct block_device *bdev;
int ret;
int nr = 0;
int parent_locked = *bio_flags & EXTENT_BIO_PARENT_LOCKED;
size_t pg_offset = 0;
size_t iosize;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
size_t disk_io_size;
size_t blocksize = inode->i_sb->s_blocksize;
unsigned long this_bio_flag = *bio_flags & EXTENT_BIO_PARENT_LOCKED;
set_page_extent_mapped(page);
end = page_end;
if (!PageUptodate(page)) {
if (cleancache_get_page(page) == 0) {
BUG_ON(blocksize != PAGE_SIZE);
unlock_extent(tree, start, end);
goto out;
}
}
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (page->index == last_byte >> PAGE_CACHE_SHIFT) {
char *userpage;
size_t zero_offset = last_byte & (PAGE_CACHE_SIZE - 1);
if (zero_offset) {
iosize = PAGE_CACHE_SIZE - zero_offset;
userpage = kmap_atomic(page);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
memset(userpage + zero_offset, 0, iosize);
flush_dcache_page(page);
kunmap_atomic(userpage);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
}
}
while (cur <= end) {
unsigned long pnr = (last_byte >> PAGE_CACHE_SHIFT) + 1;
if (cur >= last_byte) {
char *userpage;
struct extent_state *cached = NULL;
iosize = PAGE_CACHE_SIZE - pg_offset;
userpage = kmap_atomic(page);
memset(userpage + pg_offset, 0, iosize);
flush_dcache_page(page);
kunmap_atomic(userpage);
set_extent_uptodate(tree, cur, cur + iosize - 1,
&cached, GFP_NOFS);
if (!parent_locked)
unlock_extent_cached(tree, cur,
cur + iosize - 1,
&cached, GFP_NOFS);
break;
}
em = __get_extent_map(inode, page, pg_offset, cur,
end - cur + 1, get_extent, em_cached);
if (IS_ERR_OR_NULL(em)) {
SetPageError(page);
if (!parent_locked)
unlock_extent(tree, cur, end);
break;
}
extent_offset = cur - em->start;
BUG_ON(extent_map_end(em) <= cur);
BUG_ON(end < cur);
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
this_bio_flag |= EXTENT_BIO_COMPRESSED;
extent_set_compress_type(&this_bio_flag,
em->compress_type);
}
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
iosize = min(extent_map_end(em) - cur, end - cur + 1);
cur_end = min(extent_map_end(em) - 1, end);
iosize = ALIGN(iosize, blocksize);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (this_bio_flag & EXTENT_BIO_COMPRESSED) {
disk_io_size = em->block_len;
sector = em->block_start >> 9;
} else {
sector = (em->block_start + extent_offset) >> 9;
disk_io_size = iosize;
}
bdev = em->bdev;
block_start = em->block_start;
if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
block_start = EXTENT_MAP_HOLE;
free_extent_map(em);
em = NULL;
/* we've found a hole, just zero and go on */
if (block_start == EXTENT_MAP_HOLE) {
char *userpage;
struct extent_state *cached = NULL;
userpage = kmap_atomic(page);
memset(userpage + pg_offset, 0, iosize);
flush_dcache_page(page);
kunmap_atomic(userpage);
set_extent_uptodate(tree, cur, cur + iosize - 1,
&cached, GFP_NOFS);
unlock_extent_cached(tree, cur, cur + iosize - 1,
&cached, GFP_NOFS);
cur = cur + iosize;
pg_offset += iosize;
continue;
}
/* the get_extent function already copied into the page */
if (test_range_bit(tree, cur, cur_end,
EXTENT_UPTODATE, 1, NULL)) {
check_page_uptodate(tree, page);
if (!parent_locked)
unlock_extent(tree, cur, cur + iosize - 1);
cur = cur + iosize;
pg_offset += iosize;
continue;
}
/* we have an inline extent but it didn't get marked up
* to date. Error out
*/
if (block_start == EXTENT_MAP_INLINE) {
SetPageError(page);
if (!parent_locked)
unlock_extent(tree, cur, cur + iosize - 1);
cur = cur + iosize;
pg_offset += iosize;
continue;
}
pnr -= page->index;
ret = submit_extent_page(rw, tree, page,
sector, disk_io_size, pg_offset,
bdev, bio, pnr,
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
end_bio_extent_readpage, mirror_num,
*bio_flags,
this_bio_flag);
if (!ret) {
nr++;
*bio_flags = this_bio_flag;
} else {
SetPageError(page);
if (!parent_locked)
unlock_extent(tree, cur, cur + iosize - 1);
}
cur = cur + iosize;
pg_offset += iosize;
}
out:
if (!nr) {
if (!PageError(page))
SetPageUptodate(page);
unlock_page(page);
}
return 0;
}
static inline void __do_contiguous_readpages(struct extent_io_tree *tree,
struct page *pages[], int nr_pages,
u64 start, u64 end,
get_extent_t *get_extent,
struct extent_map **em_cached,
struct bio **bio, int mirror_num,
unsigned long *bio_flags, int rw)
{
struct inode *inode;
struct btrfs_ordered_extent *ordered;
int index;
inode = pages[0]->mapping->host;
while (1) {
lock_extent(tree, start, end);
ordered = btrfs_lookup_ordered_range(inode, start,
end - start + 1);
if (!ordered)
break;
unlock_extent(tree, start, end);
btrfs_start_ordered_extent(inode, ordered, 1);
btrfs_put_ordered_extent(ordered);
}
for (index = 0; index < nr_pages; index++) {
__do_readpage(tree, pages[index], get_extent, em_cached, bio,
mirror_num, bio_flags, rw);
page_cache_release(pages[index]);
}
}
static void __extent_readpages(struct extent_io_tree *tree,
struct page *pages[],
int nr_pages, get_extent_t *get_extent,
struct extent_map **em_cached,
struct bio **bio, int mirror_num,
unsigned long *bio_flags, int rw)
{
u64 start = 0;
u64 end = 0;
u64 page_start;
int index;
int first_index = 0;
for (index = 0; index < nr_pages; index++) {
page_start = page_offset(pages[index]);
if (!end) {
start = page_start;
end = start + PAGE_CACHE_SIZE - 1;
first_index = index;
} else if (end + 1 == page_start) {
end += PAGE_CACHE_SIZE;
} else {
__do_contiguous_readpages(tree, &pages[first_index],
index - first_index, start,
end, get_extent, em_cached,
bio, mirror_num, bio_flags,
rw);
start = page_start;
end = start + PAGE_CACHE_SIZE - 1;
first_index = index;
}
}
if (end)
__do_contiguous_readpages(tree, &pages[first_index],
index - first_index, start,
end, get_extent, em_cached, bio,
mirror_num, bio_flags, rw);
}
static int __extent_read_full_page(struct extent_io_tree *tree,
struct page *page,
get_extent_t *get_extent,
struct bio **bio, int mirror_num,
unsigned long *bio_flags, int rw)
{
struct inode *inode = page->mapping->host;
struct btrfs_ordered_extent *ordered;
u64 start = page_offset(page);
u64 end = start + PAGE_CACHE_SIZE - 1;
int ret;
while (1) {
lock_extent(tree, start, end);
ordered = btrfs_lookup_ordered_extent(inode, start);
if (!ordered)
break;
unlock_extent(tree, start, end);
btrfs_start_ordered_extent(inode, ordered, 1);
btrfs_put_ordered_extent(ordered);
}
ret = __do_readpage(tree, page, get_extent, NULL, bio, mirror_num,
bio_flags, rw);
return ret;
}
int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
get_extent_t *get_extent, int mirror_num)
{
struct bio *bio = NULL;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
unsigned long bio_flags = 0;
int ret;
ret = __extent_read_full_page(tree, page, get_extent, &bio, mirror_num,
&bio_flags, READ);
if (bio)
ret = submit_one_bio(READ, bio, mirror_num, bio_flags);
return ret;
}
int extent_read_full_page_nolock(struct extent_io_tree *tree, struct page *page,
get_extent_t *get_extent, int mirror_num)
{
struct bio *bio = NULL;
unsigned long bio_flags = EXTENT_BIO_PARENT_LOCKED;
int ret;
ret = __do_readpage(tree, page, get_extent, NULL, &bio, mirror_num,
&bio_flags, READ);
if (bio)
ret = submit_one_bio(READ, bio, mirror_num, bio_flags);
return ret;
}
static noinline void update_nr_written(struct page *page,
struct writeback_control *wbc,
unsigned long nr_written)
{
wbc->nr_to_write -= nr_written;
if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
page->mapping->writeback_index = page->index + nr_written;
}
/*
* helper for __extent_writepage, doing all of the delayed allocation setup.
*
* This returns 1 if our fill_delalloc function did all the work required
* to write the page (copy into inline extent). In this case the IO has
* been started and the page is already unlocked.
*
* This returns 0 if all went well (page still locked)
* This returns < 0 if there were errors (page still locked)
*/
static noinline_for_stack int writepage_delalloc(struct inode *inode,
struct page *page, struct writeback_control *wbc,
struct extent_page_data *epd,
u64 delalloc_start,
unsigned long *nr_written)
{
struct extent_io_tree *tree = epd->tree;
u64 page_end = delalloc_start + PAGE_CACHE_SIZE - 1;
u64 nr_delalloc;
u64 delalloc_to_write = 0;
u64 delalloc_end = 0;
int ret;
int page_started = 0;
if (epd->extent_locked || !tree->ops || !tree->ops->fill_delalloc)
return 0;
while (delalloc_end < page_end) {
nr_delalloc = find_lock_delalloc_range(inode, tree,
page,
&delalloc_start,
&delalloc_end,
BTRFS_MAX_EXTENT_SIZE);
if (nr_delalloc == 0) {
delalloc_start = delalloc_end + 1;
continue;
}
ret = tree->ops->fill_delalloc(inode, page,
delalloc_start,
delalloc_end,
&page_started,
nr_written);
/* File system has been set read-only */
if (ret) {
SetPageError(page);
/* fill_delalloc should be return < 0 for error
* but just in case, we use > 0 here meaning the
* IO is started, so we don't want to return > 0
* unless things are going well.
*/
ret = ret < 0 ? ret : -EIO;
goto done;
}
/*
* delalloc_end is already one less than the total
* length, so we don't subtract one from
* PAGE_CACHE_SIZE
*/
delalloc_to_write += (delalloc_end - delalloc_start +
PAGE_CACHE_SIZE) >>
PAGE_CACHE_SHIFT;
delalloc_start = delalloc_end + 1;
}
if (wbc->nr_to_write < delalloc_to_write) {
int thresh = 8192;
if (delalloc_to_write < thresh * 2)
thresh = delalloc_to_write;
wbc->nr_to_write = min_t(u64, delalloc_to_write,
thresh);
}
/* did the fill delalloc function already unlock and start
* the IO?
*/
if (page_started) {
/*
* we've unlocked the page, so we can't update
* the mapping's writeback index, just update
* nr_to_write.
*/
wbc->nr_to_write -= *nr_written;
return 1;
}
ret = 0;
done:
return ret;
}
/*
* helper for __extent_writepage. This calls the writepage start hooks,
* and does the loop to map the page into extents and bios.
*
* We return 1 if the IO is started and the page is unlocked,
* 0 if all went well (page still locked)
* < 0 if there were errors (page still locked)
*/
static noinline_for_stack int __extent_writepage_io(struct inode *inode,
struct page *page,
struct writeback_control *wbc,
struct extent_page_data *epd,
loff_t i_size,
unsigned long nr_written,
int write_flags, int *nr_ret)
{
struct extent_io_tree *tree = epd->tree;
u64 start = page_offset(page);
u64 page_end = start + PAGE_CACHE_SIZE - 1;
u64 end;
u64 cur = start;
u64 extent_offset;
u64 block_start;
u64 iosize;
sector_t sector;
struct extent_state *cached_state = NULL;
struct extent_map *em;
struct block_device *bdev;
size_t pg_offset = 0;
size_t blocksize;
int ret = 0;
int nr = 0;
bool compressed;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (tree->ops && tree->ops->writepage_start_hook) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
ret = tree->ops->writepage_start_hook(page, start,
page_end);
if (ret) {
/* Fixup worker will requeue */
if (ret == -EBUSY)
wbc->pages_skipped++;
else
redirty_page_for_writepage(wbc, page);
update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 1;
goto done_unlocked;
}
}
/*
* we don't want to touch the inode after unlocking the page,
* so we update the mapping writeback index now
*/
update_nr_written(page, wbc, nr_written + 1);
end = page_end;
if (i_size <= start) {
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, start,
page_end, NULL, 1);
goto done;
}
blocksize = inode->i_sb->s_blocksize;
while (cur <= end) {
u64 em_end;
if (cur >= i_size) {
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, cur,
page_end, NULL, 1);
break;
}
em = epd->get_extent(inode, page, pg_offset, cur,
end - cur + 1, 1);
if (IS_ERR_OR_NULL(em)) {
SetPageError(page);
Btrfs: fix hang on error (such as ENOSPC) when writing extent pages When running low on available disk space and having several processes doing buffered file IO, I got the following trace in dmesg: [ 4202.720152] INFO: task kworker/u8:1:5450 blocked for more than 120 seconds. [ 4202.720401] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.720596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.720874] kworker/u8:1 D 0000000000000001 0 5450 2 0x00000000 [ 4202.720904] Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs] [ 4202.720908] ffff8801f62ddc38 0000000000000082 ffff880203ac2490 00000000001d3f40 [ 4202.720913] ffff8801f62ddfd8 00000000001d3f40 ffff8800c4f0c920 ffff880203ac2490 [ 4202.720918] 00000000001d4a40 ffff88020fe85a40 ffff88020fe85ab8 0000000000000001 [ 4202.720922] Call Trace: [ 4202.720931] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.720950] [<ffffffffa01ec48d>] btrfs_start_ordered_extent+0x6d/0x110 [btrfs] [ 4202.720956] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.720972] [<ffffffffa01ec559>] btrfs_run_ordered_extent_work+0x29/0x40 [btrfs] [ 4202.720988] [<ffffffffa0201987>] normal_work_helper+0x137/0x2c0 [btrfs] [ 4202.720994] [<ffffffff810680e5>] process_one_work+0x1f5/0x530 (...) [ 4202.721027] 2 locks held by kworker/u8:1/5450: [ 4202.721028] #0: (%s-%s){++++..}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721037] #1: ((&work->normal_work)){+.+...}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721054] INFO: task btrfs:7891 blocked for more than 120 seconds. [ 4202.721258] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.721444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.721699] btrfs D 0000000000000001 0 7891 7890 0x00000001 [ 4202.721704] ffff88018c2119e8 0000000000000086 ffff8800a33d2490 00000000001d3f40 [ 4202.721710] ffff88018c211fd8 00000000001d3f40 ffff8802144b0000 ffff8800a33d2490 [ 4202.721714] ffff8800d8576640 ffff88020fe85bc0 ffff88020fe85bc8 7fffffffffffffff [ 4202.721718] Call Trace: [ 4202.721723] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.721727] [<ffffffff816a2ebc>] schedule_timeout+0x1dc/0x270 [ 4202.721732] [<ffffffff8109bd79>] ? mark_held_locks+0xb9/0x140 [ 4202.721736] [<ffffffff816a90c0>] ? _raw_spin_unlock_irq+0x30/0x40 [ 4202.721740] [<ffffffff8109bf0d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [ 4202.721744] [<ffffffff816a488f>] wait_for_completion+0xdf/0x120 [ 4202.721749] [<ffffffff8107fa90>] ? try_to_wake_up+0x310/0x310 [ 4202.721765] [<ffffffffa01ebee4>] btrfs_wait_ordered_extents+0x1f4/0x280 [btrfs] [ 4202.721781] [<ffffffffa020526e>] btrfs_mksubvol.isra.62+0x30e/0x5a0 [btrfs] [ 4202.721786] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.721799] [<ffffffffa02056a9>] btrfs_ioctl_snap_create_transid+0x1a9/0x1b0 [btrfs] [ 4202.721813] [<ffffffffa020583a>] btrfs_ioctl_snap_create_v2+0x10a/0x170 [btrfs] (...) It turns out that extent_io.c:__extent_writepage(), which ends up being called through filemap_fdatawrite_range() in btrfs_start_ordered_extent(), was getting -ENOSPC when calling the fill_delalloc callback. In this situation, it returned without the writepage_end_io_hook callback (inode.c:btrfs_writepage_end_io_hook) ever being called for the respective page, which prevents the ordered extent's bytes_left count from ever reaching 0, and therefore a finish_ordered_fn work is never queued into the endio_write_workers queue. This makes the task that called btrfs_start_ordered_extent() hang forever on the wait queue of the ordered extent. This is fairly easy to reproduce using a small filesystem and fsstress on a quad core vm: mkfs.btrfs -f -b `expr 2100 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt fsstress -p 6 -d /mnt -n 100000 -x \ "btrfs subvolume snapshot -r /mnt /mnt/mysnap" \ -f allocsp=0 \ -f bulkstat=0 \ -f bulkstat1=0 \ -f chown=0 \ -f creat=1 \ -f dread=0 \ -f dwrite=0 \ -f fallocate=1 \ -f fdatasync=0 \ -f fiemap=0 \ -f freesp=0 \ -f fsync=0 \ -f getattr=0 \ -f getdents=0 \ -f link=0 \ -f mkdir=0 \ -f mknod=0 \ -f punch=1 \ -f read=0 \ -f readlink=0 \ -f rename=0 \ -f resvsp=0 \ -f rmdir=0 \ -f setxattr=0 \ -f stat=0 \ -f symlink=0 \ -f sync=0 \ -f truncate=1 \ -f unlink=0 \ -f unresvsp=0 \ -f write=4 So just ensure that if an error happens while writing the extent page we call the writepage_end_io_hook callback. Also make it return the error code and ensure the caller (extent_write_cache_pages) processes all pages in the page vector even if an error happens only for some of them, so that ordered extents end up released. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-09 18:17:40 +02:00
ret = PTR_ERR_OR_ZERO(em);
break;
}
extent_offset = cur - em->start;
em_end = extent_map_end(em);
BUG_ON(em_end <= cur);
BUG_ON(end < cur);
iosize = min(em_end - cur, end - cur + 1);
iosize = ALIGN(iosize, blocksize);
sector = (em->block_start + extent_offset) >> 9;
bdev = em->bdev;
block_start = em->block_start;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
free_extent_map(em);
em = NULL;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/*
* compressed and inline extents are written through other
* paths in the FS
*/
if (compressed || block_start == EXTENT_MAP_HOLE ||
block_start == EXTENT_MAP_INLINE) {
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
/*
* end_io notification does not happen here for
* compressed extents
*/
if (!compressed && tree->ops &&
tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, cur,
cur + iosize - 1,
NULL, 1);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
else if (compressed) {
/* we don't want to end_page_writeback on
* a compressed extent. this happens
* elsewhere
*/
nr++;
}
cur += iosize;
pg_offset += iosize;
continue;
}
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
if (tree->ops && tree->ops->writepage_io_hook) {
ret = tree->ops->writepage_io_hook(page, cur,
cur + iosize - 1);
} else {
ret = 0;
}
if (ret) {
SetPageError(page);
} else {
unsigned long max_nr = (i_size >> PAGE_CACHE_SHIFT) + 1;
set_range_writeback(tree, cur, cur + iosize - 1);
if (!PageWriteback(page)) {
btrfs_err(BTRFS_I(inode)->root->fs_info,
"page %lu not writeback, cur %llu end %llu",
page->index, cur, end);
}
ret = submit_extent_page(write_flags, tree, page,
sector, iosize, pg_offset,
bdev, &epd->bio, max_nr,
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
end_bio_extent_writepage,
0, 0, 0);
if (ret)
SetPageError(page);
}
cur = cur + iosize;
pg_offset += iosize;
nr++;
}
done:
*nr_ret = nr;
done_unlocked:
/* drop our reference on any cached states */
free_extent_state(cached_state);
return ret;
}
/*
* the writepage semantics are similar to regular writepage. extent
* records are inserted to lock ranges in the tree, and as dirty areas
* are found, they are marked writeback. Then the lock bits are removed
* and the end_io handler clears the writeback ranges
*/
static int __extent_writepage(struct page *page, struct writeback_control *wbc,
void *data)
{
struct inode *inode = page->mapping->host;
struct extent_page_data *epd = data;
u64 start = page_offset(page);
u64 page_end = start + PAGE_CACHE_SIZE - 1;
int ret;
int nr = 0;
size_t pg_offset = 0;
loff_t i_size = i_size_read(inode);
unsigned long end_index = i_size >> PAGE_CACHE_SHIFT;
int write_flags;
unsigned long nr_written = 0;
if (wbc->sync_mode == WB_SYNC_ALL)
write_flags = WRITE_SYNC;
else
write_flags = WRITE;
trace___extent_writepage(page, inode, wbc);
WARN_ON(!PageLocked(page));
ClearPageError(page);
pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
if (page->index > end_index ||
(page->index == end_index && !pg_offset)) {
page->mapping->a_ops->invalidatepage(page, 0, PAGE_CACHE_SIZE);
unlock_page(page);
return 0;
}
if (page->index == end_index) {
char *userpage;
userpage = kmap_atomic(page);
memset(userpage + pg_offset, 0,
PAGE_CACHE_SIZE - pg_offset);
kunmap_atomic(userpage);
flush_dcache_page(page);
}
pg_offset = 0;
set_page_extent_mapped(page);
ret = writepage_delalloc(inode, page, wbc, epd, start, &nr_written);
if (ret == 1)
goto done_unlocked;
if (ret)
goto done;
ret = __extent_writepage_io(inode, page, wbc, epd,
i_size, nr_written, write_flags, &nr);
if (ret == 1)
goto done_unlocked;
done:
if (nr == 0) {
/* make sure the mapping tag for page dirty gets cleared */
set_page_writeback(page);
end_page_writeback(page);
}
Btrfs: fix hang on error (such as ENOSPC) when writing extent pages When running low on available disk space and having several processes doing buffered file IO, I got the following trace in dmesg: [ 4202.720152] INFO: task kworker/u8:1:5450 blocked for more than 120 seconds. [ 4202.720401] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.720596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.720874] kworker/u8:1 D 0000000000000001 0 5450 2 0x00000000 [ 4202.720904] Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs] [ 4202.720908] ffff8801f62ddc38 0000000000000082 ffff880203ac2490 00000000001d3f40 [ 4202.720913] ffff8801f62ddfd8 00000000001d3f40 ffff8800c4f0c920 ffff880203ac2490 [ 4202.720918] 00000000001d4a40 ffff88020fe85a40 ffff88020fe85ab8 0000000000000001 [ 4202.720922] Call Trace: [ 4202.720931] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.720950] [<ffffffffa01ec48d>] btrfs_start_ordered_extent+0x6d/0x110 [btrfs] [ 4202.720956] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.720972] [<ffffffffa01ec559>] btrfs_run_ordered_extent_work+0x29/0x40 [btrfs] [ 4202.720988] [<ffffffffa0201987>] normal_work_helper+0x137/0x2c0 [btrfs] [ 4202.720994] [<ffffffff810680e5>] process_one_work+0x1f5/0x530 (...) [ 4202.721027] 2 locks held by kworker/u8:1/5450: [ 4202.721028] #0: (%s-%s){++++..}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721037] #1: ((&work->normal_work)){+.+...}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721054] INFO: task btrfs:7891 blocked for more than 120 seconds. [ 4202.721258] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.721444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.721699] btrfs D 0000000000000001 0 7891 7890 0x00000001 [ 4202.721704] ffff88018c2119e8 0000000000000086 ffff8800a33d2490 00000000001d3f40 [ 4202.721710] ffff88018c211fd8 00000000001d3f40 ffff8802144b0000 ffff8800a33d2490 [ 4202.721714] ffff8800d8576640 ffff88020fe85bc0 ffff88020fe85bc8 7fffffffffffffff [ 4202.721718] Call Trace: [ 4202.721723] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.721727] [<ffffffff816a2ebc>] schedule_timeout+0x1dc/0x270 [ 4202.721732] [<ffffffff8109bd79>] ? mark_held_locks+0xb9/0x140 [ 4202.721736] [<ffffffff816a90c0>] ? _raw_spin_unlock_irq+0x30/0x40 [ 4202.721740] [<ffffffff8109bf0d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [ 4202.721744] [<ffffffff816a488f>] wait_for_completion+0xdf/0x120 [ 4202.721749] [<ffffffff8107fa90>] ? try_to_wake_up+0x310/0x310 [ 4202.721765] [<ffffffffa01ebee4>] btrfs_wait_ordered_extents+0x1f4/0x280 [btrfs] [ 4202.721781] [<ffffffffa020526e>] btrfs_mksubvol.isra.62+0x30e/0x5a0 [btrfs] [ 4202.721786] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.721799] [<ffffffffa02056a9>] btrfs_ioctl_snap_create_transid+0x1a9/0x1b0 [btrfs] [ 4202.721813] [<ffffffffa020583a>] btrfs_ioctl_snap_create_v2+0x10a/0x170 [btrfs] (...) It turns out that extent_io.c:__extent_writepage(), which ends up being called through filemap_fdatawrite_range() in btrfs_start_ordered_extent(), was getting -ENOSPC when calling the fill_delalloc callback. In this situation, it returned without the writepage_end_io_hook callback (inode.c:btrfs_writepage_end_io_hook) ever being called for the respective page, which prevents the ordered extent's bytes_left count from ever reaching 0, and therefore a finish_ordered_fn work is never queued into the endio_write_workers queue. This makes the task that called btrfs_start_ordered_extent() hang forever on the wait queue of the ordered extent. This is fairly easy to reproduce using a small filesystem and fsstress on a quad core vm: mkfs.btrfs -f -b `expr 2100 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt fsstress -p 6 -d /mnt -n 100000 -x \ "btrfs subvolume snapshot -r /mnt /mnt/mysnap" \ -f allocsp=0 \ -f bulkstat=0 \ -f bulkstat1=0 \ -f chown=0 \ -f creat=1 \ -f dread=0 \ -f dwrite=0 \ -f fallocate=1 \ -f fdatasync=0 \ -f fiemap=0 \ -f freesp=0 \ -f fsync=0 \ -f getattr=0 \ -f getdents=0 \ -f link=0 \ -f mkdir=0 \ -f mknod=0 \ -f punch=1 \ -f read=0 \ -f readlink=0 \ -f rename=0 \ -f resvsp=0 \ -f rmdir=0 \ -f setxattr=0 \ -f stat=0 \ -f symlink=0 \ -f sync=0 \ -f truncate=1 \ -f unlink=0 \ -f unresvsp=0 \ -f write=4 So just ensure that if an error happens while writing the extent page we call the writepage_end_io_hook callback. Also make it return the error code and ensure the caller (extent_write_cache_pages) processes all pages in the page vector even if an error happens only for some of them, so that ordered extents end up released. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-09 18:17:40 +02:00
if (PageError(page)) {
ret = ret < 0 ? ret : -EIO;
end_extent_writepage(page, ret, start, page_end);
}
unlock_page(page);
return ret;
done_unlocked:
return 0;
}
void wait_on_extent_buffer_writeback(struct extent_buffer *eb)
{
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 07:16:04 +02:00
wait_on_bit_io(&eb->bflags, EXTENT_BUFFER_WRITEBACK,
TASK_UNINTERRUPTIBLE);
}
static noinline_for_stack int
lock_extent_buffer_for_io(struct extent_buffer *eb,
struct btrfs_fs_info *fs_info,
struct extent_page_data *epd)
{
unsigned long i, num_pages;
int flush = 0;
int ret = 0;
if (!btrfs_try_tree_write_lock(eb)) {
flush = 1;
flush_write_bio(epd);
btrfs_tree_lock(eb);
}
if (test_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags)) {
btrfs_tree_unlock(eb);
if (!epd->sync_io)
return 0;
if (!flush) {
flush_write_bio(epd);
flush = 1;
}
while (1) {
wait_on_extent_buffer_writeback(eb);
btrfs_tree_lock(eb);
if (!test_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags))
break;
btrfs_tree_unlock(eb);
}
}
/*
* We need to do this to prevent races in people who check if the eb is
* under IO since we can end up having no IO bits set for a short period
* of time.
*/
spin_lock(&eb->refs_lock);
if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
set_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags);
spin_unlock(&eb->refs_lock);
btrfs_set_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN);
__percpu_counter_add(&fs_info->dirty_metadata_bytes,
-eb->len,
fs_info->dirty_metadata_batch);
ret = 1;
} else {
spin_unlock(&eb->refs_lock);
}
btrfs_tree_unlock(eb);
if (!ret)
return ret;
num_pages = num_extent_pages(eb->start, eb->len);
for (i = 0; i < num_pages; i++) {
struct page *p = eb->pages[i];
if (!trylock_page(p)) {
if (!flush) {
flush_write_bio(epd);
flush = 1;
}
lock_page(p);
}
}
return ret;
}
static void end_extent_buffer_writeback(struct extent_buffer *eb)
{
clear_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags);
smp_mb__after_atomic();
wake_up_bit(&eb->bflags, EXTENT_BUFFER_WRITEBACK);
}
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 13:25:56 +02:00
static void set_btree_ioerr(struct page *page)
{
struct extent_buffer *eb = (struct extent_buffer *)page->private;
struct btrfs_inode *btree_ino = BTRFS_I(eb->fs_info->btree_inode);
SetPageError(page);
if (test_and_set_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags))
return;
/*
* If writeback for a btree extent that doesn't belong to a log tree
* failed, increment the counter transaction->eb_write_errors.
* We do this because while the transaction is running and before it's
* committing (when we call filemap_fdata[write|wait]_range against
* the btree inode), we might have
* btree_inode->i_mapping->a_ops->writepages() called by the VM - if it
* returns an error or an error happens during writeback, when we're
* committing the transaction we wouldn't know about it, since the pages
* can be no longer dirty nor marked anymore for writeback (if a
* subsequent modification to the extent buffer didn't happen before the
* transaction commit), which makes filemap_fdata[write|wait]_range not
* able to find the pages tagged with SetPageError at transaction
* commit time. So if this happens we must abort the transaction,
* otherwise we commit a super block with btree roots that point to
* btree nodes/leafs whose content on disk is invalid - either garbage
* or the content of some node/leaf from a past generation that got
* cowed or deleted and is no longer valid.
*
* Note: setting AS_EIO/AS_ENOSPC in the btree inode's i_mapping would
* not be enough - we need to distinguish between log tree extents vs
* non-log tree extents, and the next filemap_fdatawait_range() call
* will catch and clear such errors in the mapping - and that call might
* be from a log sync and not from a transaction commit. Also, checking
* for the eb flag EXTENT_BUFFER_WRITE_ERR at transaction commit time is
* not done and would not be reliable - the eb might have been released
* from memory and reading it back again means that flag would not be
* set (since it's a runtime flag, not persisted on disk).
*
* Using the flags below in the btree inode also makes us achieve the
* goal of AS_EIO/AS_ENOSPC when writepages() returns success, started
* writeback for all dirty pages and before filemap_fdatawait_range()
* is called, the writeback for all dirty pages had already finished
* with errors - because we were not using AS_EIO/AS_ENOSPC,
* filemap_fdatawait_range() would return success, as it could not know
* that writeback errors happened (the pages were no longer tagged for
* writeback).
*/
switch (eb->log_index) {
case -1:
set_bit(BTRFS_INODE_BTREE_ERR, &btree_ino->runtime_flags);
break;
case 0:
set_bit(BTRFS_INODE_BTREE_LOG1_ERR, &btree_ino->runtime_flags);
break;
case 1:
set_bit(BTRFS_INODE_BTREE_LOG2_ERR, &btree_ino->runtime_flags);
break;
default:
BUG(); /* unexpected, logic error */
}
}
static void end_bio_extent_buffer_writepage(struct bio *bio, int err)
{
struct bio_vec *bvec;
struct extent_buffer *eb;
int i, done;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
eb = (struct extent_buffer *)page->private;
BUG_ON(!eb);
done = atomic_dec_and_test(&eb->io_pages);
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 13:25:56 +02:00
if (err || test_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags)) {
ClearPageUptodate(page);
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 13:25:56 +02:00
set_btree_ioerr(page);
}
end_page_writeback(page);
if (!done)
continue;
end_extent_buffer_writeback(eb);
}
bio_put(bio);
}
static noinline_for_stack int write_one_eb(struct extent_buffer *eb,
struct btrfs_fs_info *fs_info,
struct writeback_control *wbc,
struct extent_page_data *epd)
{
struct block_device *bdev = fs_info->fs_devices->latest_bdev;
struct extent_io_tree *tree = &BTRFS_I(fs_info->btree_inode)->io_tree;
u64 offset = eb->start;
unsigned long i, num_pages;
unsigned long bio_flags = 0;
int rw = (epd->sync_io ? WRITE_SYNC : WRITE) | REQ_META;
int ret = 0;
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 13:25:56 +02:00
clear_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags);
num_pages = num_extent_pages(eb->start, eb->len);
atomic_set(&eb->io_pages, num_pages);
if (btrfs_header_owner(eb) == BTRFS_TREE_LOG_OBJECTID)
bio_flags = EXTENT_BIO_TREE_LOG;
for (i = 0; i < num_pages; i++) {
struct page *p = eb->pages[i];
clear_page_dirty_for_io(p);
set_page_writeback(p);
ret = submit_extent_page(rw, tree, p, offset >> 9,
PAGE_CACHE_SIZE, 0, bdev, &epd->bio,
-1, end_bio_extent_buffer_writepage,
0, epd->bio_flags, bio_flags);
epd->bio_flags = bio_flags;
if (ret) {
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 13:25:56 +02:00
set_btree_ioerr(p);
end_page_writeback(p);
if (atomic_sub_and_test(num_pages - i, &eb->io_pages))
end_extent_buffer_writeback(eb);
ret = -EIO;
break;
}
offset += PAGE_CACHE_SIZE;
update_nr_written(p, wbc, 1);
unlock_page(p);
}
if (unlikely(ret)) {
for (; i < num_pages; i++) {
struct page *p = eb->pages[i];
clear_page_dirty_for_io(p);
unlock_page(p);
}
}
return ret;
}
int btree_write_cache_pages(struct address_space *mapping,
struct writeback_control *wbc)
{
struct extent_io_tree *tree = &BTRFS_I(mapping->host)->io_tree;
struct btrfs_fs_info *fs_info = BTRFS_I(mapping->host)->root->fs_info;
struct extent_buffer *eb, *prev_eb = NULL;
struct extent_page_data epd = {
.bio = NULL,
.tree = tree,
.extent_locked = 0,
.sync_io = wbc->sync_mode == WB_SYNC_ALL,
.bio_flags = 0,
};
int ret = 0;
int done = 0;
int nr_to_write_done = 0;
struct pagevec pvec;
int nr_pages;
pgoff_t index;
pgoff_t end; /* Inclusive */
int scanned = 0;
int tag;
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
end = -1;
} else {
index = wbc->range_start >> PAGE_CACHE_SHIFT;
end = wbc->range_end >> PAGE_CACHE_SHIFT;
scanned = 1;
}
if (wbc->sync_mode == WB_SYNC_ALL)
tag = PAGECACHE_TAG_TOWRITE;
else
tag = PAGECACHE_TAG_DIRTY;
retry:
if (wbc->sync_mode == WB_SYNC_ALL)
tag_pages_for_writeback(mapping, index, end);
while (!done && !nr_to_write_done && (index <= end) &&
(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, tag,
min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1))) {
unsigned i;
scanned = 1;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
if (!PagePrivate(page))
continue;
if (!wbc->range_cyclic && page->index > end) {
done = 1;
break;
}
spin_lock(&mapping->private_lock);
if (!PagePrivate(page)) {
spin_unlock(&mapping->private_lock);
continue;
}
eb = (struct extent_buffer *)page->private;
/*
* Shouldn't happen and normally this would be a BUG_ON
* but no sense in crashing the users box for something
* we can survive anyway.
*/
if (WARN_ON(!eb)) {
spin_unlock(&mapping->private_lock);
continue;
}
if (eb == prev_eb) {
spin_unlock(&mapping->private_lock);
continue;
}
ret = atomic_inc_not_zero(&eb->refs);
spin_unlock(&mapping->private_lock);
if (!ret)
continue;
prev_eb = eb;
ret = lock_extent_buffer_for_io(eb, fs_info, &epd);
if (!ret) {
free_extent_buffer(eb);
continue;
}
ret = write_one_eb(eb, fs_info, wbc, &epd);
if (ret) {
done = 1;
free_extent_buffer(eb);
break;
}
free_extent_buffer(eb);
/*
* the filesystem may choose to bump up nr_to_write.
* We have to make sure to honor the new nr_to_write
* at any time
*/
nr_to_write_done = wbc->nr_to_write <= 0;
}
pagevec_release(&pvec);
cond_resched();
}
if (!scanned && !done) {
/*
* We hit the last page and there is more work to be done: wrap
* back to the start of the file
*/
scanned = 1;
index = 0;
goto retry;
}
flush_write_bio(&epd);
return ret;
}
/**
* write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
* @mapping: address space structure to write
* @wbc: subtract the number of written pages from *@wbc->nr_to_write
* @writepage: function called for each page
* @data: data passed to writepage function
*
* If a page is already under I/O, write_cache_pages() skips it, even
* if it's dirty. This is desirable behaviour for memory-cleaning writeback,
* but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
* and msync() need to guarantee that all the data which was dirty at the time
* the call was made get new I/O started against them. If wbc->sync_mode is
* WB_SYNC_ALL then we were called for data integrity and we must wait for
* existing IO to complete.
*/
static int extent_write_cache_pages(struct extent_io_tree *tree,
struct address_space *mapping,
struct writeback_control *wbc,
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
struct inode *inode = mapping->host;
int ret = 0;
int done = 0;
Btrfs: fix hang on error (such as ENOSPC) when writing extent pages When running low on available disk space and having several processes doing buffered file IO, I got the following trace in dmesg: [ 4202.720152] INFO: task kworker/u8:1:5450 blocked for more than 120 seconds. [ 4202.720401] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.720596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.720874] kworker/u8:1 D 0000000000000001 0 5450 2 0x00000000 [ 4202.720904] Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs] [ 4202.720908] ffff8801f62ddc38 0000000000000082 ffff880203ac2490 00000000001d3f40 [ 4202.720913] ffff8801f62ddfd8 00000000001d3f40 ffff8800c4f0c920 ffff880203ac2490 [ 4202.720918] 00000000001d4a40 ffff88020fe85a40 ffff88020fe85ab8 0000000000000001 [ 4202.720922] Call Trace: [ 4202.720931] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.720950] [<ffffffffa01ec48d>] btrfs_start_ordered_extent+0x6d/0x110 [btrfs] [ 4202.720956] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.720972] [<ffffffffa01ec559>] btrfs_run_ordered_extent_work+0x29/0x40 [btrfs] [ 4202.720988] [<ffffffffa0201987>] normal_work_helper+0x137/0x2c0 [btrfs] [ 4202.720994] [<ffffffff810680e5>] process_one_work+0x1f5/0x530 (...) [ 4202.721027] 2 locks held by kworker/u8:1/5450: [ 4202.721028] #0: (%s-%s){++++..}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721037] #1: ((&work->normal_work)){+.+...}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721054] INFO: task btrfs:7891 blocked for more than 120 seconds. [ 4202.721258] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.721444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.721699] btrfs D 0000000000000001 0 7891 7890 0x00000001 [ 4202.721704] ffff88018c2119e8 0000000000000086 ffff8800a33d2490 00000000001d3f40 [ 4202.721710] ffff88018c211fd8 00000000001d3f40 ffff8802144b0000 ffff8800a33d2490 [ 4202.721714] ffff8800d8576640 ffff88020fe85bc0 ffff88020fe85bc8 7fffffffffffffff [ 4202.721718] Call Trace: [ 4202.721723] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.721727] [<ffffffff816a2ebc>] schedule_timeout+0x1dc/0x270 [ 4202.721732] [<ffffffff8109bd79>] ? mark_held_locks+0xb9/0x140 [ 4202.721736] [<ffffffff816a90c0>] ? _raw_spin_unlock_irq+0x30/0x40 [ 4202.721740] [<ffffffff8109bf0d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [ 4202.721744] [<ffffffff816a488f>] wait_for_completion+0xdf/0x120 [ 4202.721749] [<ffffffff8107fa90>] ? try_to_wake_up+0x310/0x310 [ 4202.721765] [<ffffffffa01ebee4>] btrfs_wait_ordered_extents+0x1f4/0x280 [btrfs] [ 4202.721781] [<ffffffffa020526e>] btrfs_mksubvol.isra.62+0x30e/0x5a0 [btrfs] [ 4202.721786] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.721799] [<ffffffffa02056a9>] btrfs_ioctl_snap_create_transid+0x1a9/0x1b0 [btrfs] [ 4202.721813] [<ffffffffa020583a>] btrfs_ioctl_snap_create_v2+0x10a/0x170 [btrfs] (...) It turns out that extent_io.c:__extent_writepage(), which ends up being called through filemap_fdatawrite_range() in btrfs_start_ordered_extent(), was getting -ENOSPC when calling the fill_delalloc callback. In this situation, it returned without the writepage_end_io_hook callback (inode.c:btrfs_writepage_end_io_hook) ever being called for the respective page, which prevents the ordered extent's bytes_left count from ever reaching 0, and therefore a finish_ordered_fn work is never queued into the endio_write_workers queue. This makes the task that called btrfs_start_ordered_extent() hang forever on the wait queue of the ordered extent. This is fairly easy to reproduce using a small filesystem and fsstress on a quad core vm: mkfs.btrfs -f -b `expr 2100 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt fsstress -p 6 -d /mnt -n 100000 -x \ "btrfs subvolume snapshot -r /mnt /mnt/mysnap" \ -f allocsp=0 \ -f bulkstat=0 \ -f bulkstat1=0 \ -f chown=0 \ -f creat=1 \ -f dread=0 \ -f dwrite=0 \ -f fallocate=1 \ -f fdatasync=0 \ -f fiemap=0 \ -f freesp=0 \ -f fsync=0 \ -f getattr=0 \ -f getdents=0 \ -f link=0 \ -f mkdir=0 \ -f mknod=0 \ -f punch=1 \ -f read=0 \ -f readlink=0 \ -f rename=0 \ -f resvsp=0 \ -f rmdir=0 \ -f setxattr=0 \ -f stat=0 \ -f symlink=0 \ -f sync=0 \ -f truncate=1 \ -f unlink=0 \ -f unresvsp=0 \ -f write=4 So just ensure that if an error happens while writing the extent page we call the writepage_end_io_hook callback. Also make it return the error code and ensure the caller (extent_write_cache_pages) processes all pages in the page vector even if an error happens only for some of them, so that ordered extents end up released. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-09 18:17:40 +02:00
int err = 0;
int nr_to_write_done = 0;
struct pagevec pvec;
int nr_pages;
pgoff_t index;
pgoff_t end; /* Inclusive */
int scanned = 0;
int tag;
/*
* We have to hold onto the inode so that ordered extents can do their
* work when the IO finishes. The alternative to this is failing to add
* an ordered extent if the igrab() fails there and that is a huge pain
* to deal with, so instead just hold onto the inode throughout the
* writepages operation. If it fails here we are freeing up the inode
* anyway and we'd rather not waste our time writing out stuff that is
* going to be truncated anyway.
*/
if (!igrab(inode))
return 0;
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
end = -1;
} else {
index = wbc->range_start >> PAGE_CACHE_SHIFT;
end = wbc->range_end >> PAGE_CACHE_SHIFT;
scanned = 1;
}
if (wbc->sync_mode == WB_SYNC_ALL)
tag = PAGECACHE_TAG_TOWRITE;
else
tag = PAGECACHE_TAG_DIRTY;
retry:
if (wbc->sync_mode == WB_SYNC_ALL)
tag_pages_for_writeback(mapping, index, end);
while (!done && !nr_to_write_done && (index <= end) &&
(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, tag,
min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1))) {
unsigned i;
scanned = 1;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
/*
* At this point we hold neither mapping->tree_lock nor
* lock on the page itself: the page may be truncated or
* invalidated (changing page->mapping to NULL), or even
* swizzled back from swapper_space to tmpfs file
* mapping
*/
if (!trylock_page(page)) {
flush_fn(data);
lock_page(page);
}
if (unlikely(page->mapping != mapping)) {
unlock_page(page);
continue;
}
if (!wbc->range_cyclic && page->index > end) {
done = 1;
unlock_page(page);
continue;
}
if (wbc->sync_mode != WB_SYNC_NONE) {
if (PageWriteback(page))
flush_fn(data);
wait_on_page_writeback(page);
}
if (PageWriteback(page) ||
!clear_page_dirty_for_io(page)) {
unlock_page(page);
continue;
}
ret = (*writepage)(page, wbc, data);
if (unlikely(ret == AOP_WRITEPAGE_ACTIVATE)) {
unlock_page(page);
ret = 0;
}
Btrfs: fix hang on error (such as ENOSPC) when writing extent pages When running low on available disk space and having several processes doing buffered file IO, I got the following trace in dmesg: [ 4202.720152] INFO: task kworker/u8:1:5450 blocked for more than 120 seconds. [ 4202.720401] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.720596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.720874] kworker/u8:1 D 0000000000000001 0 5450 2 0x00000000 [ 4202.720904] Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs] [ 4202.720908] ffff8801f62ddc38 0000000000000082 ffff880203ac2490 00000000001d3f40 [ 4202.720913] ffff8801f62ddfd8 00000000001d3f40 ffff8800c4f0c920 ffff880203ac2490 [ 4202.720918] 00000000001d4a40 ffff88020fe85a40 ffff88020fe85ab8 0000000000000001 [ 4202.720922] Call Trace: [ 4202.720931] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.720950] [<ffffffffa01ec48d>] btrfs_start_ordered_extent+0x6d/0x110 [btrfs] [ 4202.720956] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.720972] [<ffffffffa01ec559>] btrfs_run_ordered_extent_work+0x29/0x40 [btrfs] [ 4202.720988] [<ffffffffa0201987>] normal_work_helper+0x137/0x2c0 [btrfs] [ 4202.720994] [<ffffffff810680e5>] process_one_work+0x1f5/0x530 (...) [ 4202.721027] 2 locks held by kworker/u8:1/5450: [ 4202.721028] #0: (%s-%s){++++..}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721037] #1: ((&work->normal_work)){+.+...}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721054] INFO: task btrfs:7891 blocked for more than 120 seconds. [ 4202.721258] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.721444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.721699] btrfs D 0000000000000001 0 7891 7890 0x00000001 [ 4202.721704] ffff88018c2119e8 0000000000000086 ffff8800a33d2490 00000000001d3f40 [ 4202.721710] ffff88018c211fd8 00000000001d3f40 ffff8802144b0000 ffff8800a33d2490 [ 4202.721714] ffff8800d8576640 ffff88020fe85bc0 ffff88020fe85bc8 7fffffffffffffff [ 4202.721718] Call Trace: [ 4202.721723] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.721727] [<ffffffff816a2ebc>] schedule_timeout+0x1dc/0x270 [ 4202.721732] [<ffffffff8109bd79>] ? mark_held_locks+0xb9/0x140 [ 4202.721736] [<ffffffff816a90c0>] ? _raw_spin_unlock_irq+0x30/0x40 [ 4202.721740] [<ffffffff8109bf0d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [ 4202.721744] [<ffffffff816a488f>] wait_for_completion+0xdf/0x120 [ 4202.721749] [<ffffffff8107fa90>] ? try_to_wake_up+0x310/0x310 [ 4202.721765] [<ffffffffa01ebee4>] btrfs_wait_ordered_extents+0x1f4/0x280 [btrfs] [ 4202.721781] [<ffffffffa020526e>] btrfs_mksubvol.isra.62+0x30e/0x5a0 [btrfs] [ 4202.721786] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.721799] [<ffffffffa02056a9>] btrfs_ioctl_snap_create_transid+0x1a9/0x1b0 [btrfs] [ 4202.721813] [<ffffffffa020583a>] btrfs_ioctl_snap_create_v2+0x10a/0x170 [btrfs] (...) It turns out that extent_io.c:__extent_writepage(), which ends up being called through filemap_fdatawrite_range() in btrfs_start_ordered_extent(), was getting -ENOSPC when calling the fill_delalloc callback. In this situation, it returned without the writepage_end_io_hook callback (inode.c:btrfs_writepage_end_io_hook) ever being called for the respective page, which prevents the ordered extent's bytes_left count from ever reaching 0, and therefore a finish_ordered_fn work is never queued into the endio_write_workers queue. This makes the task that called btrfs_start_ordered_extent() hang forever on the wait queue of the ordered extent. This is fairly easy to reproduce using a small filesystem and fsstress on a quad core vm: mkfs.btrfs -f -b `expr 2100 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt fsstress -p 6 -d /mnt -n 100000 -x \ "btrfs subvolume snapshot -r /mnt /mnt/mysnap" \ -f allocsp=0 \ -f bulkstat=0 \ -f bulkstat1=0 \ -f chown=0 \ -f creat=1 \ -f dread=0 \ -f dwrite=0 \ -f fallocate=1 \ -f fdatasync=0 \ -f fiemap=0 \ -f freesp=0 \ -f fsync=0 \ -f getattr=0 \ -f getdents=0 \ -f link=0 \ -f mkdir=0 \ -f mknod=0 \ -f punch=1 \ -f read=0 \ -f readlink=0 \ -f rename=0 \ -f resvsp=0 \ -f rmdir=0 \ -f setxattr=0 \ -f stat=0 \ -f symlink=0 \ -f sync=0 \ -f truncate=1 \ -f unlink=0 \ -f unresvsp=0 \ -f write=4 So just ensure that if an error happens while writing the extent page we call the writepage_end_io_hook callback. Also make it return the error code and ensure the caller (extent_write_cache_pages) processes all pages in the page vector even if an error happens only for some of them, so that ordered extents end up released. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-09 18:17:40 +02:00
if (!err && ret < 0)
err = ret;
/*
* the filesystem may choose to bump up nr_to_write.
* We have to make sure to honor the new nr_to_write
* at any time
*/
nr_to_write_done = wbc->nr_to_write <= 0;
}
pagevec_release(&pvec);
cond_resched();
}
Btrfs: fix hang on error (such as ENOSPC) when writing extent pages When running low on available disk space and having several processes doing buffered file IO, I got the following trace in dmesg: [ 4202.720152] INFO: task kworker/u8:1:5450 blocked for more than 120 seconds. [ 4202.720401] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.720596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.720874] kworker/u8:1 D 0000000000000001 0 5450 2 0x00000000 [ 4202.720904] Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs] [ 4202.720908] ffff8801f62ddc38 0000000000000082 ffff880203ac2490 00000000001d3f40 [ 4202.720913] ffff8801f62ddfd8 00000000001d3f40 ffff8800c4f0c920 ffff880203ac2490 [ 4202.720918] 00000000001d4a40 ffff88020fe85a40 ffff88020fe85ab8 0000000000000001 [ 4202.720922] Call Trace: [ 4202.720931] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.720950] [<ffffffffa01ec48d>] btrfs_start_ordered_extent+0x6d/0x110 [btrfs] [ 4202.720956] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.720972] [<ffffffffa01ec559>] btrfs_run_ordered_extent_work+0x29/0x40 [btrfs] [ 4202.720988] [<ffffffffa0201987>] normal_work_helper+0x137/0x2c0 [btrfs] [ 4202.720994] [<ffffffff810680e5>] process_one_work+0x1f5/0x530 (...) [ 4202.721027] 2 locks held by kworker/u8:1/5450: [ 4202.721028] #0: (%s-%s){++++..}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721037] #1: ((&work->normal_work)){+.+...}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721054] INFO: task btrfs:7891 blocked for more than 120 seconds. [ 4202.721258] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.721444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.721699] btrfs D 0000000000000001 0 7891 7890 0x00000001 [ 4202.721704] ffff88018c2119e8 0000000000000086 ffff8800a33d2490 00000000001d3f40 [ 4202.721710] ffff88018c211fd8 00000000001d3f40 ffff8802144b0000 ffff8800a33d2490 [ 4202.721714] ffff8800d8576640 ffff88020fe85bc0 ffff88020fe85bc8 7fffffffffffffff [ 4202.721718] Call Trace: [ 4202.721723] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.721727] [<ffffffff816a2ebc>] schedule_timeout+0x1dc/0x270 [ 4202.721732] [<ffffffff8109bd79>] ? mark_held_locks+0xb9/0x140 [ 4202.721736] [<ffffffff816a90c0>] ? _raw_spin_unlock_irq+0x30/0x40 [ 4202.721740] [<ffffffff8109bf0d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [ 4202.721744] [<ffffffff816a488f>] wait_for_completion+0xdf/0x120 [ 4202.721749] [<ffffffff8107fa90>] ? try_to_wake_up+0x310/0x310 [ 4202.721765] [<ffffffffa01ebee4>] btrfs_wait_ordered_extents+0x1f4/0x280 [btrfs] [ 4202.721781] [<ffffffffa020526e>] btrfs_mksubvol.isra.62+0x30e/0x5a0 [btrfs] [ 4202.721786] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.721799] [<ffffffffa02056a9>] btrfs_ioctl_snap_create_transid+0x1a9/0x1b0 [btrfs] [ 4202.721813] [<ffffffffa020583a>] btrfs_ioctl_snap_create_v2+0x10a/0x170 [btrfs] (...) It turns out that extent_io.c:__extent_writepage(), which ends up being called through filemap_fdatawrite_range() in btrfs_start_ordered_extent(), was getting -ENOSPC when calling the fill_delalloc callback. In this situation, it returned without the writepage_end_io_hook callback (inode.c:btrfs_writepage_end_io_hook) ever being called for the respective page, which prevents the ordered extent's bytes_left count from ever reaching 0, and therefore a finish_ordered_fn work is never queued into the endio_write_workers queue. This makes the task that called btrfs_start_ordered_extent() hang forever on the wait queue of the ordered extent. This is fairly easy to reproduce using a small filesystem and fsstress on a quad core vm: mkfs.btrfs -f -b `expr 2100 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt fsstress -p 6 -d /mnt -n 100000 -x \ "btrfs subvolume snapshot -r /mnt /mnt/mysnap" \ -f allocsp=0 \ -f bulkstat=0 \ -f bulkstat1=0 \ -f chown=0 \ -f creat=1 \ -f dread=0 \ -f dwrite=0 \ -f fallocate=1 \ -f fdatasync=0 \ -f fiemap=0 \ -f freesp=0 \ -f fsync=0 \ -f getattr=0 \ -f getdents=0 \ -f link=0 \ -f mkdir=0 \ -f mknod=0 \ -f punch=1 \ -f read=0 \ -f readlink=0 \ -f rename=0 \ -f resvsp=0 \ -f rmdir=0 \ -f setxattr=0 \ -f stat=0 \ -f symlink=0 \ -f sync=0 \ -f truncate=1 \ -f unlink=0 \ -f unresvsp=0 \ -f write=4 So just ensure that if an error happens while writing the extent page we call the writepage_end_io_hook callback. Also make it return the error code and ensure the caller (extent_write_cache_pages) processes all pages in the page vector even if an error happens only for some of them, so that ordered extents end up released. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-09 18:17:40 +02:00
if (!scanned && !done && !err) {
/*
* We hit the last page and there is more work to be done: wrap
* back to the start of the file
*/
scanned = 1;
index = 0;
goto retry;
}
btrfs_add_delayed_iput(inode);
Btrfs: fix hang on error (such as ENOSPC) when writing extent pages When running low on available disk space and having several processes doing buffered file IO, I got the following trace in dmesg: [ 4202.720152] INFO: task kworker/u8:1:5450 blocked for more than 120 seconds. [ 4202.720401] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.720596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.720874] kworker/u8:1 D 0000000000000001 0 5450 2 0x00000000 [ 4202.720904] Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs] [ 4202.720908] ffff8801f62ddc38 0000000000000082 ffff880203ac2490 00000000001d3f40 [ 4202.720913] ffff8801f62ddfd8 00000000001d3f40 ffff8800c4f0c920 ffff880203ac2490 [ 4202.720918] 00000000001d4a40 ffff88020fe85a40 ffff88020fe85ab8 0000000000000001 [ 4202.720922] Call Trace: [ 4202.720931] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.720950] [<ffffffffa01ec48d>] btrfs_start_ordered_extent+0x6d/0x110 [btrfs] [ 4202.720956] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.720972] [<ffffffffa01ec559>] btrfs_run_ordered_extent_work+0x29/0x40 [btrfs] [ 4202.720988] [<ffffffffa0201987>] normal_work_helper+0x137/0x2c0 [btrfs] [ 4202.720994] [<ffffffff810680e5>] process_one_work+0x1f5/0x530 (...) [ 4202.721027] 2 locks held by kworker/u8:1/5450: [ 4202.721028] #0: (%s-%s){++++..}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721037] #1: ((&work->normal_work)){+.+...}, at: [<ffffffff81068083>] process_one_work+0x193/0x530 [ 4202.721054] INFO: task btrfs:7891 blocked for more than 120 seconds. [ 4202.721258] Not tainted 3.13.0-fdm-btrfs-next-26+ #1 [ 4202.721444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4202.721699] btrfs D 0000000000000001 0 7891 7890 0x00000001 [ 4202.721704] ffff88018c2119e8 0000000000000086 ffff8800a33d2490 00000000001d3f40 [ 4202.721710] ffff88018c211fd8 00000000001d3f40 ffff8802144b0000 ffff8800a33d2490 [ 4202.721714] ffff8800d8576640 ffff88020fe85bc0 ffff88020fe85bc8 7fffffffffffffff [ 4202.721718] Call Trace: [ 4202.721723] [<ffffffff816a3cb9>] schedule+0x29/0x70 [ 4202.721727] [<ffffffff816a2ebc>] schedule_timeout+0x1dc/0x270 [ 4202.721732] [<ffffffff8109bd79>] ? mark_held_locks+0xb9/0x140 [ 4202.721736] [<ffffffff816a90c0>] ? _raw_spin_unlock_irq+0x30/0x40 [ 4202.721740] [<ffffffff8109bf0d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [ 4202.721744] [<ffffffff816a488f>] wait_for_completion+0xdf/0x120 [ 4202.721749] [<ffffffff8107fa90>] ? try_to_wake_up+0x310/0x310 [ 4202.721765] [<ffffffffa01ebee4>] btrfs_wait_ordered_extents+0x1f4/0x280 [btrfs] [ 4202.721781] [<ffffffffa020526e>] btrfs_mksubvol.isra.62+0x30e/0x5a0 [btrfs] [ 4202.721786] [<ffffffff8108e620>] ? bit_waitqueue+0xc0/0xc0 [ 4202.721799] [<ffffffffa02056a9>] btrfs_ioctl_snap_create_transid+0x1a9/0x1b0 [btrfs] [ 4202.721813] [<ffffffffa020583a>] btrfs_ioctl_snap_create_v2+0x10a/0x170 [btrfs] (...) It turns out that extent_io.c:__extent_writepage(), which ends up being called through filemap_fdatawrite_range() in btrfs_start_ordered_extent(), was getting -ENOSPC when calling the fill_delalloc callback. In this situation, it returned without the writepage_end_io_hook callback (inode.c:btrfs_writepage_end_io_hook) ever being called for the respective page, which prevents the ordered extent's bytes_left count from ever reaching 0, and therefore a finish_ordered_fn work is never queued into the endio_write_workers queue. This makes the task that called btrfs_start_ordered_extent() hang forever on the wait queue of the ordered extent. This is fairly easy to reproduce using a small filesystem and fsstress on a quad core vm: mkfs.btrfs -f -b `expr 2100 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt fsstress -p 6 -d /mnt -n 100000 -x \ "btrfs subvolume snapshot -r /mnt /mnt/mysnap" \ -f allocsp=0 \ -f bulkstat=0 \ -f bulkstat1=0 \ -f chown=0 \ -f creat=1 \ -f dread=0 \ -f dwrite=0 \ -f fallocate=1 \ -f fdatasync=0 \ -f fiemap=0 \ -f freesp=0 \ -f fsync=0 \ -f getattr=0 \ -f getdents=0 \ -f link=0 \ -f mkdir=0 \ -f mknod=0 \ -f punch=1 \ -f read=0 \ -f readlink=0 \ -f rename=0 \ -f resvsp=0 \ -f rmdir=0 \ -f setxattr=0 \ -f stat=0 \ -f symlink=0 \ -f sync=0 \ -f truncate=1 \ -f unlink=0 \ -f unresvsp=0 \ -f write=4 So just ensure that if an error happens while writing the extent page we call the writepage_end_io_hook callback. Also make it return the error code and ensure the caller (extent_write_cache_pages) processes all pages in the page vector even if an error happens only for some of them, so that ordered extents end up released. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-09 18:17:40 +02:00
return err;
}
static void flush_epd_write_bio(struct extent_page_data *epd)
{
if (epd->bio) {
int rw = WRITE;
int ret;
if (epd->sync_io)
rw = WRITE_SYNC;
ret = submit_one_bio(rw, epd->bio, 0, epd->bio_flags);
BUG_ON(ret < 0); /* -ENOMEM */
epd->bio = NULL;
}
}
static noinline void flush_write_bio(void *data)
{
struct extent_page_data *epd = data;
flush_epd_write_bio(epd);
}
int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
get_extent_t *get_extent,
struct writeback_control *wbc)
{
int ret;
struct extent_page_data epd = {
.bio = NULL,
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
.sync_io = wbc->sync_mode == WB_SYNC_ALL,
.bio_flags = 0,
};
ret = __extent_writepage(page, wbc, &epd);
flush_epd_write_bio(&epd);
return ret;
}
int extent_write_locked_range(struct extent_io_tree *tree, struct inode *inode,
u64 start, u64 end, get_extent_t *get_extent,
int mode)
{
int ret = 0;
struct address_space *mapping = inode->i_mapping;
struct page *page;
unsigned long nr_pages = (end - start + PAGE_CACHE_SIZE) >>
PAGE_CACHE_SHIFT;
struct extent_page_data epd = {
.bio = NULL,
.tree = tree,
.get_extent = get_extent,
.extent_locked = 1,
.sync_io = mode == WB_SYNC_ALL,
.bio_flags = 0,
};
struct writeback_control wbc_writepages = {
.sync_mode = mode,
.nr_to_write = nr_pages * 2,
.range_start = start,
.range_end = end + 1,
};
while (start <= end) {
page = find_get_page(mapping, start >> PAGE_CACHE_SHIFT);
if (clear_page_dirty_for_io(page))
ret = __extent_writepage(page, &wbc_writepages, &epd);
else {
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, start,
start + PAGE_CACHE_SIZE - 1,
NULL, 1);
unlock_page(page);
}
page_cache_release(page);
start += PAGE_CACHE_SIZE;
}
flush_epd_write_bio(&epd);
return ret;
}
int extent_writepages(struct extent_io_tree *tree,
struct address_space *mapping,
get_extent_t *get_extent,
struct writeback_control *wbc)
{
int ret = 0;
struct extent_page_data epd = {
.bio = NULL,
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
.sync_io = wbc->sync_mode == WB_SYNC_ALL,
.bio_flags = 0,
};
ret = extent_write_cache_pages(tree, mapping, wbc,
__extent_writepage, &epd,
flush_write_bio);
flush_epd_write_bio(&epd);
return ret;
}
int extent_readpages(struct extent_io_tree *tree,
struct address_space *mapping,
struct list_head *pages, unsigned nr_pages,
get_extent_t get_extent)
{
struct bio *bio = NULL;
unsigned page_idx;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
unsigned long bio_flags = 0;
struct page *pagepool[16];
struct page *page;
struct extent_map *em_cached = NULL;
int nr = 0;
for (page_idx = 0; page_idx < nr_pages; page_idx++) {
page = list_entry(pages->prev, struct page, lru);
prefetchw(&page->flags);
list_del(&page->lru);
if (add_to_page_cache_lru(page, mapping,
page->index, GFP_NOFS)) {
page_cache_release(page);
continue;
}
pagepool[nr++] = page;
if (nr < ARRAY_SIZE(pagepool))
continue;
__extent_readpages(tree, pagepool, nr, get_extent, &em_cached,
&bio, 0, &bio_flags, READ);
nr = 0;
}
if (nr)
__extent_readpages(tree, pagepool, nr, get_extent, &em_cached,
&bio, 0, &bio_flags, READ);
if (em_cached)
free_extent_map(em_cached);
BUG_ON(!list_empty(pages));
if (bio)
return submit_one_bio(READ, bio, 0, bio_flags);
return 0;
}
/*
* basic invalidatepage code, this waits on any locked or writeback
* ranges corresponding to the page, and then deletes any extent state
* records from the tree
*/
int extent_invalidatepage(struct extent_io_tree *tree,
struct page *page, unsigned long offset)
{
struct extent_state *cached_state = NULL;
u64 start = page_offset(page);
u64 end = start + PAGE_CACHE_SIZE - 1;
size_t blocksize = page->mapping->host->i_sb->s_blocksize;
start += ALIGN(offset, blocksize);
if (start > end)
return 0;
lock_extent_bits(tree, start, end, 0, &cached_state);
wait_on_page_writeback(page);
clear_extent_bit(tree, start, end,
EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
EXTENT_DO_ACCOUNTING,
1, 1, &cached_state, GFP_NOFS);
return 0;
}
/*
* a helper for releasepage, this tests for areas of the page that
* are locked or under IO and drops the related state bits if it is safe
* to drop the page.
*/
static int try_release_extent_state(struct extent_map_tree *map,
struct extent_io_tree *tree,
struct page *page, gfp_t mask)
{
u64 start = page_offset(page);
u64 end = start + PAGE_CACHE_SIZE - 1;
int ret = 1;
if (test_range_bit(tree, start, end,
EXTENT_IOBITS, 0, NULL))
ret = 0;
else {
if ((mask & GFP_NOFS) == GFP_NOFS)
mask = GFP_NOFS;
/*
* at this point we can safely clear everything except the
* locked bit and the nodatasum bit
*/
ret = clear_extent_bit(tree, start, end,
~(EXTENT_LOCKED | EXTENT_NODATASUM),
0, 0, NULL, mask);
/* if clear_extent_bit failed for enomem reasons,
* we can't allow the release to continue.
*/
if (ret < 0)
ret = 0;
else
ret = 1;
}
return ret;
}
/*
* a helper for releasepage. As long as there are no locked extents
* in the range corresponding to the page, both state records and extent
* map records are removed
*/
int try_release_extent_mapping(struct extent_map_tree *map,
struct extent_io_tree *tree, struct page *page,
gfp_t mask)
{
struct extent_map *em;
u64 start = page_offset(page);
u64 end = start + PAGE_CACHE_SIZE - 1;
if ((mask & __GFP_WAIT) &&
page->mapping->host->i_size > 16 * 1024 * 1024) {
u64 len;
while (start <= end) {
len = end - start + 1;
write_lock(&map->lock);
em = lookup_extent_mapping(map, start, len);
if (!em) {
write_unlock(&map->lock);
break;
}
if (test_bit(EXTENT_FLAG_PINNED, &em->flags) ||
em->start != start) {
write_unlock(&map->lock);
free_extent_map(em);
break;
}
if (!test_range_bit(tree, em->start,
extent_map_end(em) - 1,
EXTENT_LOCKED | EXTENT_WRITEBACK,
0, NULL)) {
remove_extent_mapping(map, em);
/* once for the rb tree */
free_extent_map(em);
}
start = extent_map_end(em);
write_unlock(&map->lock);
/* once for us */
free_extent_map(em);
}
}
return try_release_extent_state(map, tree, page, mask);
}
/*
* helper function for fiemap, which doesn't want to see any holes.
* This maps until we find something past 'last'
*/
static struct extent_map *get_extent_skip_holes(struct inode *inode,
u64 offset,
u64 last,
get_extent_t *get_extent)
{
u64 sectorsize = BTRFS_I(inode)->root->sectorsize;
struct extent_map *em;
u64 len;
if (offset >= last)
return NULL;
while (1) {
len = last - offset;
if (len == 0)
break;
len = ALIGN(len, sectorsize);
em = get_extent(inode, NULL, 0, offset, len, 0);
if (IS_ERR_OR_NULL(em))
return em;
/* if this isn't a hole return it */
if (!test_bit(EXTENT_FLAG_VACANCY, &em->flags) &&
em->block_start != EXTENT_MAP_HOLE) {
return em;
}
/* this is a hole, advance to the next extent */
offset = extent_map_end(em);
free_extent_map(em);
if (offset >= last)
break;
}
return NULL;
}
int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len, get_extent_t *get_extent)
{
int ret = 0;
u64 off = start;
u64 max = start + len;
u32 flags = 0;
u32 found_type;
u64 last;
u64 last_for_get_extent = 0;
u64 disko = 0;
u64 isize = i_size_read(inode);
struct btrfs_key found_key;
struct extent_map *em = NULL;
struct extent_state *cached_state = NULL;
struct btrfs_path *path;
struct btrfs_root *root = BTRFS_I(inode)->root;
int end = 0;
u64 em_start = 0;
u64 em_len = 0;
u64 em_end = 0;
if (len == 0)
return -EINVAL;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
path->leave_spinning = 1;
start = round_down(start, BTRFS_I(inode)->root->sectorsize);
len = round_up(max, BTRFS_I(inode)->root->sectorsize) - start;
/*
* lookup the last file extent. We're not using i_size here
* because there might be preallocation past i_size
*/
ret = btrfs_lookup_file_extent(NULL, root, path, btrfs_ino(inode), -1,
0);
if (ret < 0) {
btrfs_free_path(path);
return ret;
}
WARN_ON(!ret);
path->slots[0]--;
btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]);
found_type = found_key.type;
/* No extents, but there might be delalloc bits */
if (found_key.objectid != btrfs_ino(inode) ||
found_type != BTRFS_EXTENT_DATA_KEY) {
/* have to trust i_size as the end */
last = (u64)-1;
last_for_get_extent = isize;
} else {
/*
* remember the start of the last extent. There are a
* bunch of different factors that go into the length of the
* extent, so its much less complex to remember where it started
*/
last = found_key.offset;
last_for_get_extent = last + 1;
}
btrfs_release_path(path);
/*
* we might have some extents allocated but more delalloc past those
* extents. so, we trust isize unless the start of the last extent is
* beyond isize
*/
if (last < isize) {
last = (u64)-1;
last_for_get_extent = isize;
}
lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len - 1, 0,
&cached_state);
em = get_extent_skip_holes(inode, start, last_for_get_extent,
get_extent);
if (!em)
goto out;
if (IS_ERR(em)) {
ret = PTR_ERR(em);
goto out;
}
while (!end) {
u64 offset_in_extent = 0;
/* break if the extent we found is outside the range */
if (em->start >= max || extent_map_end(em) < off)
break;
/*
* get_extent may return an extent that starts before our
* requested range. We have to make sure the ranges
* we return to fiemap always move forward and don't
* overlap, so adjust the offsets here
*/
em_start = max(em->start, off);
/*
* record the offset from the start of the extent
* for adjusting the disk offset below. Only do this if the
* extent isn't compressed since our in ram offset may be past
* what we have actually allocated on disk.
*/
if (!test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
offset_in_extent = em_start - em->start;
em_end = extent_map_end(em);
em_len = em_end - em_start;
disko = 0;
flags = 0;
/*
* bump off for our next call to get_extent
*/
off = extent_map_end(em);
if (off >= max)
end = 1;
if (em->block_start == EXTENT_MAP_LAST_BYTE) {
end = 1;
flags |= FIEMAP_EXTENT_LAST;
} else if (em->block_start == EXTENT_MAP_INLINE) {
flags |= (FIEMAP_EXTENT_DATA_INLINE |
FIEMAP_EXTENT_NOT_ALIGNED);
} else if (em->block_start == EXTENT_MAP_DELALLOC) {
flags |= (FIEMAP_EXTENT_DELALLOC |
FIEMAP_EXTENT_UNKNOWN);
} else if (fieinfo->fi_extents_max) {
u64 bytenr = em->block_start -
(em->start - em->orig_start);
disko = em->block_start + offset_in_extent;
/*
* As btrfs supports shared space, this information
* can be exported to userspace tools via
* flag FIEMAP_EXTENT_SHARED. If fi_extents_max == 0
* then we're just getting a count and we can skip the
* lookup stuff.
*/
ret = btrfs_check_shared(NULL, root->fs_info,
root->objectid,
btrfs_ino(inode), bytenr);
if (ret < 0)
goto out_free;
if (ret)
flags |= FIEMAP_EXTENT_SHARED;
ret = 0;
}
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
flags |= FIEMAP_EXTENT_ENCODED;
if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
flags |= FIEMAP_EXTENT_UNWRITTEN;
free_extent_map(em);
em = NULL;
if ((em_start >= last) || em_len == (u64)-1 ||
(last == (u64)-1 && isize <= em_end)) {
flags |= FIEMAP_EXTENT_LAST;
end = 1;
}
/* now scan forward to see if this is really the last extent. */
em = get_extent_skip_holes(inode, off, last_for_get_extent,
get_extent);
if (IS_ERR(em)) {
ret = PTR_ERR(em);
goto out;
}
if (!em) {
flags |= FIEMAP_EXTENT_LAST;
end = 1;
}
ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
em_len, flags);
if (ret) {
if (ret == 1)
ret = 0;
goto out_free;
}
}
out_free:
free_extent_map(em);
out:
btrfs_free_path(path);
unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + len - 1,
&cached_state, GFP_NOFS);
return ret;
}
static void __free_extent_buffer(struct extent_buffer *eb)
{
btrfs_leak_debug_del(&eb->leak_list);
kmem_cache_free(extent_buffer_cache, eb);
}
int extent_buffer_under_io(struct extent_buffer *eb)
{
return (atomic_read(&eb->io_pages) ||
test_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags) ||
test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags));
}
/*
* Helper for releasing extent buffer page.
*/
static void btrfs_release_extent_buffer_page(struct extent_buffer *eb)
{
unsigned long index;
struct page *page;
int mapped = !test_bit(EXTENT_BUFFER_DUMMY, &eb->bflags);
BUG_ON(extent_buffer_under_io(eb));
index = num_extent_pages(eb->start, eb->len);
if (index == 0)
return;
do {
index--;
page = eb->pages[index];
if (!page)
continue;
if (mapped)
spin_lock(&page->mapping->private_lock);
/*
* We do this since we'll remove the pages after we've
* removed the eb from the radix tree, so we could race
* and have this page now attached to the new eb. So
* only clear page_private if it's still connected to
* this eb.
*/
if (PagePrivate(page) &&
page->private == (unsigned long)eb) {
BUG_ON(test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags));
BUG_ON(PageDirty(page));
BUG_ON(PageWriteback(page));
/*
* We need to make sure we haven't be attached
* to a new eb.
*/
ClearPagePrivate(page);
set_page_private(page, 0);
/* One for the page private */
page_cache_release(page);
}
if (mapped)
spin_unlock(&page->mapping->private_lock);
/* One for when we alloced the page */
page_cache_release(page);
} while (index != 0);
}
/*
* Helper for releasing the extent buffer.
*/
static inline void btrfs_release_extent_buffer(struct extent_buffer *eb)
{
btrfs_release_extent_buffer_page(eb);
__free_extent_buffer(eb);
}
static struct extent_buffer *
__alloc_extent_buffer(struct btrfs_fs_info *fs_info, u64 start,
unsigned long len)
{
struct extent_buffer *eb = NULL;
eb = kmem_cache_zalloc(extent_buffer_cache, GFP_NOFS);
if (eb == NULL)
return NULL;
eb->start = start;
eb->len = len;
eb->fs_info = fs_info;
eb->bflags = 0;
rwlock_init(&eb->lock);
atomic_set(&eb->write_locks, 0);
atomic_set(&eb->read_locks, 0);
atomic_set(&eb->blocking_readers, 0);
atomic_set(&eb->blocking_writers, 0);
atomic_set(&eb->spinning_readers, 0);
atomic_set(&eb->spinning_writers, 0);
eb->lock_nested = 0;
init_waitqueue_head(&eb->write_lock_wq);
init_waitqueue_head(&eb->read_lock_wq);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 15:25:08 +01:00
btrfs_leak_debug_add(&eb->leak_list, &buffers);
spin_lock_init(&eb->refs_lock);
atomic_set(&eb->refs, 1);
atomic_set(&eb->io_pages, 0);
/*
* Sanity checks, currently the maximum is 64k covered by 16x 4k pages
*/
BUILD_BUG_ON(BTRFS_MAX_METADATA_BLOCKSIZE
> MAX_INLINE_EXTENT_BUFFER_SIZE);
BUG_ON(len > MAX_INLINE_EXTENT_BUFFER_SIZE);
return eb;
}
struct extent_buffer *btrfs_clone_extent_buffer(struct extent_buffer *src)
{
unsigned long i;
struct page *p;
struct extent_buffer *new;
unsigned long num_pages = num_extent_pages(src->start, src->len);
new = __alloc_extent_buffer(src->fs_info, src->start, src->len);
if (new == NULL)
return NULL;
for (i = 0; i < num_pages; i++) {
p = alloc_page(GFP_NOFS);
if (!p) {
btrfs_release_extent_buffer(new);
return NULL;
}
attach_extent_buffer_page(new, p);
WARN_ON(PageDirty(p));
SetPageUptodate(p);
new->pages[i] = p;
}
copy_extent_buffer(new, src, 0, 0, src->len);
set_bit(EXTENT_BUFFER_UPTODATE, &new->bflags);
set_bit(EXTENT_BUFFER_DUMMY, &new->bflags);
return new;
}
struct extent_buffer *alloc_dummy_extent_buffer(struct btrfs_fs_info *fs_info,
u64 start)
{
struct extent_buffer *eb;
unsigned long len;
unsigned long num_pages;
unsigned long i;
if (!fs_info) {
/*
* Called only from tests that don't always have a fs_info
* available, but we know that nodesize is 4096
*/
len = 4096;
} else {
len = fs_info->tree_root->nodesize;
}
num_pages = num_extent_pages(0, len);
eb = __alloc_extent_buffer(fs_info, start, len);
if (!eb)
return NULL;
for (i = 0; i < num_pages; i++) {
eb->pages[i] = alloc_page(GFP_NOFS);
if (!eb->pages[i])
goto err;
}
set_extent_buffer_uptodate(eb);
btrfs_set_header_nritems(eb, 0);
set_bit(EXTENT_BUFFER_DUMMY, &eb->bflags);
return eb;
err:
for (; i > 0; i--)
__free_page(eb->pages[i - 1]);
__free_extent_buffer(eb);
return NULL;
}
static void check_buffer_tree_ref(struct extent_buffer *eb)
{
int refs;
/* the ref bit is tricky. We have to make sure it is set
* if we have the buffer dirty. Otherwise the
* code to free a buffer can end up dropping a dirty
* page
*
* Once the ref bit is set, it won't go away while the
* buffer is dirty or in writeback, and it also won't
* go away while we have the reference count on the
* eb bumped.
*
* We can't just set the ref bit without bumping the
* ref on the eb because free_extent_buffer might
* see the ref bit and try to clear it. If this happens
* free_extent_buffer might end up dropping our original
* ref by mistake and freeing the page before we are able
* to add one more ref.
*
* So bump the ref count first, then set the bit. If someone
* beat us to it, drop the ref we added.
*/
refs = atomic_read(&eb->refs);
if (refs >= 2 && test_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags))
return;
spin_lock(&eb->refs_lock);
if (!test_and_set_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags))
atomic_inc(&eb->refs);
spin_unlock(&eb->refs_lock);
}
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 01:10:31 +02:00
static void mark_extent_buffer_accessed(struct extent_buffer *eb,
struct page *accessed)
{
unsigned long num_pages, i;
check_buffer_tree_ref(eb);
num_pages = num_extent_pages(eb->start, eb->len);
for (i = 0; i < num_pages; i++) {
struct page *p = eb->pages[i];
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 01:10:31 +02:00
if (p != accessed)
mark_page_accessed(p);
}
}
struct extent_buffer *find_extent_buffer(struct btrfs_fs_info *fs_info,
u64 start)
{
struct extent_buffer *eb;
rcu_read_lock();
eb = radix_tree_lookup(&fs_info->buffer_radix,
start >> PAGE_CACHE_SHIFT);
if (eb && atomic_inc_not_zero(&eb->refs)) {
rcu_read_unlock();
Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON There's a race between releasing extent buffers that are flagged as stale and recycling them that makes us it the following BUG_ON at btrfs_release_extent_buffer_page: BUG_ON(extent_buffer_under_io(eb)) The BUG_ON is triggered because the extent buffer has the flag EXTENT_BUFFER_DIRTY set as a consequence of having been reused and made dirty by another concurrent task. Here follows a sequence of steps that leads to the BUG_ON. CPU 0 CPU 1 CPU 2 path->nodes[0] == eb X X->refs == 2 (1 for the tree, 1 for the path) btrfs_header_generation(X) == current trans id flag EXTENT_BUFFER_DIRTY set on X btrfs_release_path(path) unlocks X reads eb X X->refs incremented to 3 locks eb X btrfs_del_items(X) X becomes empty clean_tree_block(X) clear EXTENT_BUFFER_DIRTY from X btrfs_del_leaf(X) unlocks X extent_buffer_get(X) X->refs incremented to 4 btrfs_free_tree_block(X) X's range is not pinned X's range added to free space cache free_extent_buffer_stale(X) lock X->refs_lock set EXTENT_BUFFER_STALE on X release_extent_buffer(X) X->refs decremented to 3 unlocks X->refs_lock btrfs_release_path() unlocks X free_extent_buffer(X) X->refs becomes 2 __btrfs_cow_block(Y) btrfs_alloc_tree_block() btrfs_reserve_extent() find_free_extent() gets offset == X->start btrfs_init_new_buffer(X->start) btrfs_find_create_tree_block(X->start) alloc_extent_buffer(X->start) find_extent_buffer(X->start) finds eb X in radix tree free_extent_buffer(X) lock X->refs_lock test X->refs == 2 test bit EXTENT_BUFFER_STALE is set test !extent_buffer_under_io(eb) increments X->refs to 3 mark_extent_buffer_accessed(X) check_buffer_tree_ref(X) --> does nothing, X->refs >= 2 and EXTENT_BUFFER_TREE_REF is set in X clear EXTENT_BUFFER_STALE from X locks X btrfs_mark_buffer_dirty() set_extent_buffer_dirty(X) check_buffer_tree_ref(X) --> does nothing, X->refs >= 2 and EXTENT_BUFFER_TREE_REF is set sets EXTENT_BUFFER_DIRTY on X test and clear EXTENT_BUFFER_TREE_REF decrements X->refs to 2 release_extent_buffer(X) decrements X->refs to 1 unlock X->refs_lock unlock X free_extent_buffer(X) lock X->refs_lock release_extent_buffer(X) decrements X->refs to 0 btrfs_release_extent_buffer_page(X) BUG_ON(extent_buffer_under_io(X)) --> EXTENT_BUFFER_DIRTY set on X Fix this by making find_extent buffer wait for any ongoing task currently executing free_extent_buffer()/free_extent_buffer_stale() if the extent buffer has the stale flag set. A more clean alternative would be to always increment the extent buffer's reference count while holding its refs_lock spinlock but find_extent_buffer is a performance critical area and that would cause lock contention whenever multiple tasks search for the same extent buffer concurrently. A build server running a SLES 12 kernel (3.12 kernel + over 450 upstream btrfs patches backported from newer kernels) was hitting this often: [1212302.461948] kernel BUG at ../fs/btrfs/extent_io.c:4507! (...) [1212302.470219] CPU: 1 PID: 19259 Comm: bs_sched Not tainted 3.12.36-38-default #1 [1212302.540792] Hardware name: Supermicro PDSM4/PDSM4, BIOS 6.00 04/17/2006 [1212302.540792] task: ffff8800e07e0100 ti: ffff8800d6412000 task.ti: ffff8800d6412000 [1212302.540792] RIP: 0010:[<ffffffffa0507081>] [<ffffffffa0507081>] btrfs_release_extent_buffer_page.constprop.51+0x101/0x110 [btrfs] (...) [1212302.630008] Call Trace: [1212302.630008] [<ffffffffa05070cd>] release_extent_buffer+0x3d/0xa0 [btrfs] [1212302.630008] [<ffffffffa04c2d9d>] btrfs_release_path+0x1d/0xa0 [btrfs] [1212302.630008] [<ffffffffa04c5c7e>] read_block_for_search.isra.33+0x13e/0x3a0 [btrfs] [1212302.630008] [<ffffffffa04c8094>] btrfs_search_slot+0x3f4/0xa80 [btrfs] [1212302.630008] [<ffffffffa04cf5d8>] lookup_inline_extent_backref+0xf8/0x630 [btrfs] [1212302.630008] [<ffffffffa04d13dd>] __btrfs_free_extent+0x11d/0xc40 [btrfs] [1212302.630008] [<ffffffffa04d64a4>] __btrfs_run_delayed_refs+0x394/0x11d0 [btrfs] [1212302.630008] [<ffffffffa04db379>] btrfs_run_delayed_refs.part.66+0x69/0x280 [btrfs] [1212302.630008] [<ffffffffa04ed2ad>] __btrfs_end_transaction+0x2ad/0x3d0 [btrfs] [1212302.630008] [<ffffffffa04f7505>] btrfs_evict_inode+0x4a5/0x500 [btrfs] [1212302.630008] [<ffffffff811b9e28>] evict+0xa8/0x190 [1212302.630008] [<ffffffff811b0330>] do_unlinkat+0x1a0/0x2b0 I was also able to reproduce this on a 3.19 kernel, corresponding to Chris' integration branch from about a month ago, running the following stress test on a qemu/kvm guest (with 4 virtual cpus and 16Gb of ram): while true; do mkfs.btrfs -l 4096 -f -b `expr 20 \* 1024 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt snapshot_cmd="btrfs subvolume snapshot -r /mnt" snapshot_cmd="$snapshot_cmd /mnt/snap_\`date +'%H_%M_%S_%N'\`" fsstress -d /mnt -n 25000 -p 8 -x "$snapshot_cmd" -X 100 umount /mnt done Which usually triggers the BUG_ON within less than 24 hours: [49558.618097] ------------[ cut here ]------------ [49558.619732] kernel BUG at fs/btrfs/extent_io.c:4551! (...) [49558.620031] CPU: 3 PID: 23908 Comm: fsstress Tainted: G W 3.19.0-btrfs-next-7+ #3 [49558.620031] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [49558.620031] task: ffff8800319fc0d0 ti: ffff880220da8000 task.ti: ffff880220da8000 [49558.620031] RIP: 0010:[<ffffffffa0476b1a>] [<ffffffffa0476b1a>] btrfs_release_extent_buffer_page+0x20/0xe9 [btrfs] (...) [49558.620031] Call Trace: [49558.620031] [<ffffffffa0476c73>] release_extent_buffer+0x90/0xd3 [btrfs] [49558.620031] [<ffffffff8142b10c>] ? _raw_spin_lock+0x3b/0x43 [49558.620031] [<ffffffffa0477052>] ? free_extent_buffer+0x37/0x94 [btrfs] [49558.620031] [<ffffffffa04770ab>] free_extent_buffer+0x90/0x94 [btrfs] [49558.620031] [<ffffffffa04396d5>] btrfs_release_path+0x4a/0x69 [btrfs] [49558.620031] [<ffffffffa0444907>] __btrfs_free_extent+0x778/0x80c [btrfs] [49558.620031] [<ffffffffa044a485>] __btrfs_run_delayed_refs+0xad2/0xc62 [btrfs] [49558.728054] [<ffffffff811420d5>] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18 [49558.728054] [<ffffffffa044c1e8>] btrfs_run_delayed_refs+0x6d/0x1ba [btrfs] [49558.728054] [<ffffffffa045917f>] ? join_transaction.isra.9+0xb9/0x36b [btrfs] [49558.728054] [<ffffffffa045a75c>] btrfs_commit_transaction+0x4c/0x981 [btrfs] [49558.728054] [<ffffffffa0434f86>] btrfs_sync_fs+0xd5/0x10d [btrfs] [49558.728054] [<ffffffff81155923>] ? iterate_supers+0x60/0xc4 [49558.728054] [<ffffffff8117966a>] ? do_sync_work+0x91/0x91 [49558.728054] [<ffffffff8117968a>] sync_fs_one_sb+0x20/0x22 [49558.728054] [<ffffffff81155939>] iterate_supers+0x76/0xc4 [49558.728054] [<ffffffff811798e8>] sys_sync+0x55/0x83 [49558.728054] [<ffffffff8142bbd2>] system_call_fastpath+0x12/0x17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
2015-04-23 12:28:48 +02:00
/*
* Lock our eb's refs_lock to avoid races with
* free_extent_buffer. When we get our eb it might be flagged
* with EXTENT_BUFFER_STALE and another task running
* free_extent_buffer might have seen that flag set,
* eb->refs == 2, that the buffer isn't under IO (dirty and
* writeback flags not set) and it's still in the tree (flag
* EXTENT_BUFFER_TREE_REF set), therefore being in the process
* of decrementing the extent buffer's reference count twice.
* So here we could race and increment the eb's reference count,
* clear its stale flag, mark it as dirty and drop our reference
* before the other task finishes executing free_extent_buffer,
* which would later result in an attempt to free an extent
* buffer that is dirty.
*/
if (test_bit(EXTENT_BUFFER_STALE, &eb->bflags)) {
spin_lock(&eb->refs_lock);
spin_unlock(&eb->refs_lock);
}
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 01:10:31 +02:00
mark_extent_buffer_accessed(eb, NULL);
return eb;
}
rcu_read_unlock();
return NULL;
}
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info,
u64 start)
{
struct extent_buffer *eb, *exists = NULL;
int ret;
eb = find_extent_buffer(fs_info, start);
if (eb)
return eb;
eb = alloc_dummy_extent_buffer(fs_info, start);
if (!eb)
return NULL;
eb->fs_info = fs_info;
again:
ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
if (ret)
goto free_eb;
spin_lock(&fs_info->buffer_lock);
ret = radix_tree_insert(&fs_info->buffer_radix,
start >> PAGE_CACHE_SHIFT, eb);
spin_unlock(&fs_info->buffer_lock);
radix_tree_preload_end();
if (ret == -EEXIST) {
exists = find_extent_buffer(fs_info, start);
if (exists)
goto free_eb;
else
goto again;
}
check_buffer_tree_ref(eb);
set_bit(EXTENT_BUFFER_IN_TREE, &eb->bflags);
/*
* We will free dummy extent buffer's if they come into
* free_extent_buffer with a ref count of 2, but if we are using this we
* want the buffers to stay in memory until we're done with them, so
* bump the ref count again.
*/
atomic_inc(&eb->refs);
return eb;
free_eb:
btrfs_release_extent_buffer(eb);
return exists;
}
#endif
struct extent_buffer *alloc_extent_buffer(struct btrfs_fs_info *fs_info,
u64 start)
{
unsigned long len = fs_info->tree_root->nodesize;
unsigned long num_pages = num_extent_pages(start, len);
unsigned long i;
unsigned long index = start >> PAGE_CACHE_SHIFT;
struct extent_buffer *eb;
struct extent_buffer *exists = NULL;
struct page *p;
struct address_space *mapping = fs_info->btree_inode->i_mapping;
int uptodate = 1;
int ret;
eb = find_extent_buffer(fs_info, start);
if (eb)
return eb;
eb = __alloc_extent_buffer(fs_info, start, len);
if (!eb)
return NULL;
for (i = 0; i < num_pages; i++, index++) {
p = find_or_create_page(mapping, index, GFP_NOFS);
if (!p)
goto free_eb;
spin_lock(&mapping->private_lock);
if (PagePrivate(p)) {
/*
* We could have already allocated an eb for this page
* and attached one so lets see if we can get a ref on
* the existing eb, and if we can we know it's good and
* we can just return that one, else we know we can just
* overwrite page->private.
*/
exists = (struct extent_buffer *)p->private;
if (atomic_inc_not_zero(&exists->refs)) {
spin_unlock(&mapping->private_lock);
unlock_page(p);
page_cache_release(p);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 01:10:31 +02:00
mark_extent_buffer_accessed(exists, p);
goto free_eb;
}
exists = NULL;
/*
* Do this so attach doesn't complain and we need to
* drop the ref the old guy had.
*/
ClearPagePrivate(p);
WARN_ON(PageDirty(p));
page_cache_release(p);
}
attach_extent_buffer_page(eb, p);
spin_unlock(&mapping->private_lock);
WARN_ON(PageDirty(p));
eb->pages[i] = p;
if (!PageUptodate(p))
uptodate = 0;
/*
* see below about how we avoid a nasty race with release page
* and why we unlock later
*/
}
if (uptodate)
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 15:25:08 +01:00
set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
again:
ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
if (ret)
goto free_eb;
spin_lock(&fs_info->buffer_lock);
ret = radix_tree_insert(&fs_info->buffer_radix,
start >> PAGE_CACHE_SHIFT, eb);
spin_unlock(&fs_info->buffer_lock);
radix_tree_preload_end();
if (ret == -EEXIST) {
exists = find_extent_buffer(fs_info, start);
if (exists)
goto free_eb;
else
goto again;
}
/* add one reference for the tree */
check_buffer_tree_ref(eb);
set_bit(EXTENT_BUFFER_IN_TREE, &eb->bflags);
/*
* there is a race where release page may have
* tried to find this extent buffer in the radix
* but failed. It will tell the VM it is safe to
* reclaim the, and it will clear the page private bit.
* We must make sure to set the page private bit properly
* after the extent buffer is in the radix tree so
* it doesn't get lost
*/
SetPageChecked(eb->pages[0]);
for (i = 1; i < num_pages; i++) {
p = eb->pages[i];
ClearPageChecked(p);
unlock_page(p);
}
unlock_page(eb->pages[0]);
return eb;
free_eb:
WARN_ON(!atomic_dec_and_test(&eb->refs));
for (i = 0; i < num_pages; i++) {
if (eb->pages[i])
unlock_page(eb->pages[i]);
}
btrfs_release_extent_buffer(eb);
return exists;
}
static inline void btrfs_release_extent_buffer_rcu(struct rcu_head *head)
{
struct extent_buffer *eb =
container_of(head, struct extent_buffer, rcu_head);
__free_extent_buffer(eb);
}
/* Expects to have eb->eb_lock already held */
static int release_extent_buffer(struct extent_buffer *eb)
{
WARN_ON(atomic_read(&eb->refs) == 0);
if (atomic_dec_and_test(&eb->refs)) {
if (test_and_clear_bit(EXTENT_BUFFER_IN_TREE, &eb->bflags)) {
struct btrfs_fs_info *fs_info = eb->fs_info;
spin_unlock(&eb->refs_lock);
spin_lock(&fs_info->buffer_lock);
radix_tree_delete(&fs_info->buffer_radix,
eb->start >> PAGE_CACHE_SHIFT);
spin_unlock(&fs_info->buffer_lock);
} else {
spin_unlock(&eb->refs_lock);
}
/* Should be safe to release our pages at this point */
btrfs_release_extent_buffer_page(eb);
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
if (unlikely(test_bit(EXTENT_BUFFER_DUMMY, &eb->bflags))) {
__free_extent_buffer(eb);
return 1;
}
#endif
call_rcu(&eb->rcu_head, btrfs_release_extent_buffer_rcu);
return 1;
}
spin_unlock(&eb->refs_lock);
return 0;
}
void free_extent_buffer(struct extent_buffer *eb)
{
int refs;
int old;
if (!eb)
return;
while (1) {
refs = atomic_read(&eb->refs);
if (refs <= 3)
break;
old = atomic_cmpxchg(&eb->refs, refs, refs - 1);
if (old == refs)
return;
}
spin_lock(&eb->refs_lock);
if (atomic_read(&eb->refs) == 2 &&
test_bit(EXTENT_BUFFER_DUMMY, &eb->bflags))
atomic_dec(&eb->refs);
if (atomic_read(&eb->refs) == 2 &&
test_bit(EXTENT_BUFFER_STALE, &eb->bflags) &&
!extent_buffer_under_io(eb) &&
test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags))
atomic_dec(&eb->refs);
/*
* I know this is terrible, but it's temporary until we stop tracking
* the uptodate bits and such for the extent buffers.
*/
release_extent_buffer(eb);
}
void free_extent_buffer_stale(struct extent_buffer *eb)
{
if (!eb)
return;
spin_lock(&eb->refs_lock);
set_bit(EXTENT_BUFFER_STALE, &eb->bflags);
if (atomic_read(&eb->refs) == 2 && !extent_buffer_under_io(eb) &&
test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags))
atomic_dec(&eb->refs);
release_extent_buffer(eb);
}
void clear_extent_buffer_dirty(struct extent_buffer *eb)
{
unsigned long i;
unsigned long num_pages;
struct page *page;
num_pages = num_extent_pages(eb->start, eb->len);
for (i = 0; i < num_pages; i++) {
page = eb->pages[i];
if (!PageDirty(page))
continue;
lock_page(page);
WARN_ON(!PagePrivate(page));
clear_page_dirty_for_io(page);
spin_lock_irq(&page->mapping->tree_lock);
if (!PageDirty(page)) {
radix_tree_tag_clear(&page->mapping->page_tree,
page_index(page),
PAGECACHE_TAG_DIRTY);
}
spin_unlock_irq(&page->mapping->tree_lock);
ClearPageError(page);
unlock_page(page);
}
WARN_ON(atomic_read(&eb->refs) == 0);
}
int set_extent_buffer_dirty(struct extent_buffer *eb)
{
unsigned long i;
unsigned long num_pages;
int was_dirty = 0;
check_buffer_tree_ref(eb);
was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags);
num_pages = num_extent_pages(eb->start, eb->len);
WARN_ON(atomic_read(&eb->refs) == 0);
WARN_ON(!test_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags));
for (i = 0; i < num_pages; i++)
set_page_dirty(eb->pages[i]);
return was_dirty;
}
int clear_extent_buffer_uptodate(struct extent_buffer *eb)
{
unsigned long i;
struct page *page;
unsigned long num_pages;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 15:25:08 +01:00
clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
num_pages = num_extent_pages(eb->start, eb->len);
for (i = 0; i < num_pages; i++) {
page = eb->pages[i];
if (page)
ClearPageUptodate(page);
}
return 0;
}
int set_extent_buffer_uptodate(struct extent_buffer *eb)
{
unsigned long i;
struct page *page;
unsigned long num_pages;
set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
num_pages = num_extent_pages(eb->start, eb->len);
for (i = 0; i < num_pages; i++) {
page = eb->pages[i];
SetPageUptodate(page);
}
return 0;
}
int extent_buffer_uptodate(struct extent_buffer *eb)
{
return test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
}
int read_extent_buffer_pages(struct extent_io_tree *tree,
struct extent_buffer *eb, u64 start, int wait,
get_extent_t *get_extent, int mirror_num)
{
unsigned long i;
unsigned long start_i;
struct page *page;
int err;
int ret = 0;
int locked_pages = 0;
int all_uptodate = 1;
unsigned long num_pages;
unsigned long num_reads = 0;
struct bio *bio = NULL;
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 19:49:59 +01:00
unsigned long bio_flags = 0;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 15:25:08 +01:00
if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
return 0;
if (start) {
WARN_ON(start < eb->start);
start_i = (start >> PAGE_CACHE_SHIFT) -
(eb->start >> PAGE_CACHE_SHIFT);
} else {
start_i = 0;
}
num_pages = num_extent_pages(eb->start, eb->len);
for (i = start_i; i < num_pages; i++) {
page = eb->pages[i];
if (wait == WAIT_NONE) {
if (!trylock_page(page))
goto unlock_exit;
} else {
lock_page(page);
}
locked_pages++;
if (!PageUptodate(page)) {
num_reads++;
all_uptodate = 0;
}
}
if (all_uptodate) {
if (start_i == 0)
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 15:25:08 +01:00
set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
goto unlock_exit;
}
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 13:25:56 +02:00
clear_bit(EXTENT_BUFFER_READ_ERR, &eb->bflags);
eb->read_mirror = 0;
atomic_set(&eb->io_pages, num_reads);
for (i = start_i; i < num_pages; i++) {
page = eb->pages[i];
if (!PageUptodate(page)) {
ClearPageError(page);
err = __extent_read_full_page(tree, page,
get_extent, &bio,
mirror_num, &bio_flags,
READ | REQ_META);
if (err)
ret = err;
} else {
unlock_page(page);
}
}
if (bio) {
err = submit_one_bio(READ | REQ_META, bio, mirror_num,
bio_flags);
if (err)
return err;
}
if (ret || wait != WAIT_COMPLETE)
return ret;
for (i = start_i; i < num_pages; i++) {
page = eb->pages[i];
wait_on_page_locked(page);
if (!PageUptodate(page))
ret = -EIO;
}
return ret;
unlock_exit:
i = start_i;
while (locked_pages > 0) {
page = eb->pages[i];
i++;
unlock_page(page);
locked_pages--;
}
return ret;
}
void read_extent_buffer(struct extent_buffer *eb, void *dstv,
unsigned long start,
unsigned long len)
{
size_t cur;
size_t offset;
struct page *page;
char *kaddr;
char *dst = (char *)dstv;
size_t start_offset = eb->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + start) >> PAGE_CACHE_SHIFT;
WARN_ON(start > eb->len);
WARN_ON(start + len > eb->start + eb->len);
offset = (start_offset + start) & (PAGE_CACHE_SIZE - 1);
while (len > 0) {
page = eb->pages[i];
cur = min(len, (PAGE_CACHE_SIZE - offset));
kaddr = page_address(page);
memcpy(dst, kaddr + offset, cur);
dst += cur;
len -= cur;
offset = 0;
i++;
}
}
int read_extent_buffer_to_user(struct extent_buffer *eb, void __user *dstv,
unsigned long start,
unsigned long len)
{
size_t cur;
size_t offset;
struct page *page;
char *kaddr;
char __user *dst = (char __user *)dstv;
size_t start_offset = eb->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + start) >> PAGE_CACHE_SHIFT;
int ret = 0;
WARN_ON(start > eb->len);
WARN_ON(start + len > eb->start + eb->len);
offset = (start_offset + start) & (PAGE_CACHE_SIZE - 1);
while (len > 0) {
page = eb->pages[i];
cur = min(len, (PAGE_CACHE_SIZE - offset));
kaddr = page_address(page);
if (copy_to_user(dst, kaddr + offset, cur)) {
ret = -EFAULT;
break;
}
dst += cur;
len -= cur;
offset = 0;
i++;
}
return ret;
}
int map_private_extent_buffer(struct extent_buffer *eb, unsigned long start,
unsigned long min_len, char **map,
unsigned long *map_start,
unsigned long *map_len)
{
size_t offset = start & (PAGE_CACHE_SIZE - 1);
char *kaddr;
struct page *p;
size_t start_offset = eb->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + start) >> PAGE_CACHE_SHIFT;
unsigned long end_i = (start_offset + start + min_len - 1) >>
PAGE_CACHE_SHIFT;
if (i != end_i)
return -EINVAL;
if (i == 0) {
offset = start_offset;
*map_start = 0;
} else {
offset = 0;
*map_start = ((u64)i << PAGE_CACHE_SHIFT) - start_offset;
}
if (start + min_len > eb->len) {
WARN(1, KERN_ERR "btrfs bad mapping eb start %llu len %lu, "
"wanted %lu %lu\n",
eb->start, eb->len, start, min_len);
return -EINVAL;
}
p = eb->pages[i];
kaddr = page_address(p);
*map = kaddr + offset;
*map_len = PAGE_CACHE_SIZE - offset;
return 0;
}
int memcmp_extent_buffer(struct extent_buffer *eb, const void *ptrv,
unsigned long start,
unsigned long len)
{
size_t cur;
size_t offset;
struct page *page;
char *kaddr;
char *ptr = (char *)ptrv;
size_t start_offset = eb->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + start) >> PAGE_CACHE_SHIFT;
int ret = 0;
WARN_ON(start > eb->len);
WARN_ON(start + len > eb->start + eb->len);
offset = (start_offset + start) & (PAGE_CACHE_SIZE - 1);
while (len > 0) {
page = eb->pages[i];
cur = min(len, (PAGE_CACHE_SIZE - offset));
kaddr = page_address(page);
ret = memcmp(ptr, kaddr + offset, cur);
if (ret)
break;
ptr += cur;
len -= cur;
offset = 0;
i++;
}
return ret;
}
void write_extent_buffer(struct extent_buffer *eb, const void *srcv,
unsigned long start, unsigned long len)
{
size_t cur;
size_t offset;
struct page *page;
char *kaddr;
char *src = (char *)srcv;
size_t start_offset = eb->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + start) >> PAGE_CACHE_SHIFT;
WARN_ON(start > eb->len);
WARN_ON(start + len > eb->start + eb->len);
offset = (start_offset + start) & (PAGE_CACHE_SIZE - 1);
while (len > 0) {
page = eb->pages[i];
WARN_ON(!PageUptodate(page));
cur = min(len, PAGE_CACHE_SIZE - offset);
kaddr = page_address(page);
memcpy(kaddr + offset, src, cur);
src += cur;
len -= cur;
offset = 0;
i++;
}
}
void memset_extent_buffer(struct extent_buffer *eb, char c,
unsigned long start, unsigned long len)
{
size_t cur;
size_t offset;
struct page *page;
char *kaddr;
size_t start_offset = eb->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + start) >> PAGE_CACHE_SHIFT;
WARN_ON(start > eb->len);
WARN_ON(start + len > eb->start + eb->len);
offset = (start_offset + start) & (PAGE_CACHE_SIZE - 1);
while (len > 0) {
page = eb->pages[i];
WARN_ON(!PageUptodate(page));
cur = min(len, PAGE_CACHE_SIZE - offset);
kaddr = page_address(page);
memset(kaddr + offset, c, cur);
len -= cur;
offset = 0;
i++;
}
}
void copy_extent_buffer(struct extent_buffer *dst, struct extent_buffer *src,
unsigned long dst_offset, unsigned long src_offset,
unsigned long len)
{
u64 dst_len = dst->len;
size_t cur;
size_t offset;
struct page *page;
char *kaddr;
size_t start_offset = dst->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long i = (start_offset + dst_offset) >> PAGE_CACHE_SHIFT;
WARN_ON(src->len != dst_len);
offset = (start_offset + dst_offset) &
(PAGE_CACHE_SIZE - 1);
while (len > 0) {
page = dst->pages[i];
WARN_ON(!PageUptodate(page));
cur = min(len, (unsigned long)(PAGE_CACHE_SIZE - offset));
kaddr = page_address(page);
read_extent_buffer(src, kaddr + offset, src_offset, cur);
src_offset += cur;
len -= cur;
offset = 0;
i++;
}
}
btrfs: properly handle overlapping areas in memmove_extent_buffer Fix data corruption caused by memcpy() usage on overlapping data. I've observed it first when found out usermode linux crash on btrfs. ?all chain is the following: ------------[ cut here ]------------ WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219() Call Trace: 6fa39a58: [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c 6fa39a68: [<60029ad9>] warn_slowpath_common+0x59/0x70 6fa39aa8: [<60029b05>] warn_slowpath_null+0x15/0x17 6fa39ab8: [<600efc97>] memcpy_extent_buffer+0x1a5/0x219 6fa39b48: [<600efd9f>] memmove_extent_buffer+0x94/0x208 6fa39bc8: [<600becbf>] btrfs_del_items+0x214/0x473 6fa39c78: [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda 6fa39cc8: [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d 6fa39d08: [<600d7864>] btrfs_start_transaction+0xe/0x10 6fa39d48: [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b 6fa39d78: [<600e04bc>] btrfs_unlink+0x70/0xef 6fa39dc8: [<6007f0d0>] vfs_unlink+0x58/0xa3 6fa39df8: [<60080278>] do_unlinkat+0xd4/0x162 6fa39e48: [<600517db>] call_rcu_sched+0xe/0x10 6fa39e58: [<600452a8>] __put_cred+0x58/0x5a 6fa39e78: [<6007446c>] sys_faccessat+0x154/0x166 6fa39ed8: [<60080317>] sys_unlink+0x11/0x13 6fa39ee8: [<60016b80>] handle_syscall+0x58/0x70 6fa39f08: [<60021377>] userspace+0x2d4/0x381 6fa39fc8: [<60014507>] fork_handler+0x62/0x69 ---[ end trace 70b0ca2ef0266b93 ]--- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.html Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 23:52:52 +02:00
static inline bool areas_overlap(unsigned long src, unsigned long dst, unsigned long len)
{
unsigned long distance = (src > dst) ? src - dst : dst - src;
return distance < len;
}
static void copy_pages(struct page *dst_page, struct page *src_page,
unsigned long dst_off, unsigned long src_off,
unsigned long len)
{
char *dst_kaddr = page_address(dst_page);
char *src_kaddr;
int must_memmove = 0;
btrfs: properly handle overlapping areas in memmove_extent_buffer Fix data corruption caused by memcpy() usage on overlapping data. I've observed it first when found out usermode linux crash on btrfs. ?all chain is the following: ------------[ cut here ]------------ WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219() Call Trace: 6fa39a58: [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c 6fa39a68: [<60029ad9>] warn_slowpath_common+0x59/0x70 6fa39aa8: [<60029b05>] warn_slowpath_null+0x15/0x17 6fa39ab8: [<600efc97>] memcpy_extent_buffer+0x1a5/0x219 6fa39b48: [<600efd9f>] memmove_extent_buffer+0x94/0x208 6fa39bc8: [<600becbf>] btrfs_del_items+0x214/0x473 6fa39c78: [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda 6fa39cc8: [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d 6fa39d08: [<600d7864>] btrfs_start_transaction+0xe/0x10 6fa39d48: [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b 6fa39d78: [<600e04bc>] btrfs_unlink+0x70/0xef 6fa39dc8: [<6007f0d0>] vfs_unlink+0x58/0xa3 6fa39df8: [<60080278>] do_unlinkat+0xd4/0x162 6fa39e48: [<600517db>] call_rcu_sched+0xe/0x10 6fa39e58: [<600452a8>] __put_cred+0x58/0x5a 6fa39e78: [<6007446c>] sys_faccessat+0x154/0x166 6fa39ed8: [<60080317>] sys_unlink+0x11/0x13 6fa39ee8: [<60016b80>] handle_syscall+0x58/0x70 6fa39f08: [<60021377>] userspace+0x2d4/0x381 6fa39fc8: [<60014507>] fork_handler+0x62/0x69 ---[ end trace 70b0ca2ef0266b93 ]--- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.html Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 23:52:52 +02:00
if (dst_page != src_page) {
src_kaddr = page_address(src_page);
btrfs: properly handle overlapping areas in memmove_extent_buffer Fix data corruption caused by memcpy() usage on overlapping data. I've observed it first when found out usermode linux crash on btrfs. ?all chain is the following: ------------[ cut here ]------------ WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219() Call Trace: 6fa39a58: [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c 6fa39a68: [<60029ad9>] warn_slowpath_common+0x59/0x70 6fa39aa8: [<60029b05>] warn_slowpath_null+0x15/0x17 6fa39ab8: [<600efc97>] memcpy_extent_buffer+0x1a5/0x219 6fa39b48: [<600efd9f>] memmove_extent_buffer+0x94/0x208 6fa39bc8: [<600becbf>] btrfs_del_items+0x214/0x473 6fa39c78: [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda 6fa39cc8: [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d 6fa39d08: [<600d7864>] btrfs_start_transaction+0xe/0x10 6fa39d48: [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b 6fa39d78: [<600e04bc>] btrfs_unlink+0x70/0xef 6fa39dc8: [<6007f0d0>] vfs_unlink+0x58/0xa3 6fa39df8: [<60080278>] do_unlinkat+0xd4/0x162 6fa39e48: [<600517db>] call_rcu_sched+0xe/0x10 6fa39e58: [<600452a8>] __put_cred+0x58/0x5a 6fa39e78: [<6007446c>] sys_faccessat+0x154/0x166 6fa39ed8: [<60080317>] sys_unlink+0x11/0x13 6fa39ee8: [<60016b80>] handle_syscall+0x58/0x70 6fa39f08: [<60021377>] userspace+0x2d4/0x381 6fa39fc8: [<60014507>] fork_handler+0x62/0x69 ---[ end trace 70b0ca2ef0266b93 ]--- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.html Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 23:52:52 +02:00
} else {
src_kaddr = dst_kaddr;
if (areas_overlap(src_off, dst_off, len))
must_memmove = 1;
btrfs: properly handle overlapping areas in memmove_extent_buffer Fix data corruption caused by memcpy() usage on overlapping data. I've observed it first when found out usermode linux crash on btrfs. ?all chain is the following: ------------[ cut here ]------------ WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219() Call Trace: 6fa39a58: [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c 6fa39a68: [<60029ad9>] warn_slowpath_common+0x59/0x70 6fa39aa8: [<60029b05>] warn_slowpath_null+0x15/0x17 6fa39ab8: [<600efc97>] memcpy_extent_buffer+0x1a5/0x219 6fa39b48: [<600efd9f>] memmove_extent_buffer+0x94/0x208 6fa39bc8: [<600becbf>] btrfs_del_items+0x214/0x473 6fa39c78: [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda 6fa39cc8: [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d 6fa39d08: [<600d7864>] btrfs_start_transaction+0xe/0x10 6fa39d48: [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b 6fa39d78: [<600e04bc>] btrfs_unlink+0x70/0xef 6fa39dc8: [<6007f0d0>] vfs_unlink+0x58/0xa3 6fa39df8: [<60080278>] do_unlinkat+0xd4/0x162 6fa39e48: [<600517db>] call_rcu_sched+0xe/0x10 6fa39e58: [<600452a8>] __put_cred+0x58/0x5a 6fa39e78: [<6007446c>] sys_faccessat+0x154/0x166 6fa39ed8: [<60080317>] sys_unlink+0x11/0x13 6fa39ee8: [<60016b80>] handle_syscall+0x58/0x70 6fa39f08: [<60021377>] userspace+0x2d4/0x381 6fa39fc8: [<60014507>] fork_handler+0x62/0x69 ---[ end trace 70b0ca2ef0266b93 ]--- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.html Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-11 23:52:52 +02:00
}
if (must_memmove)
memmove(dst_kaddr + dst_off, src_kaddr + src_off, len);
else
memcpy(dst_kaddr + dst_off, src_kaddr + src_off, len);
}
void memcpy_extent_buffer(struct extent_buffer *dst, unsigned long dst_offset,
unsigned long src_offset, unsigned long len)
{
size_t cur;
size_t dst_off_in_page;
size_t src_off_in_page;
size_t start_offset = dst->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long dst_i;
unsigned long src_i;
if (src_offset + len > dst->len) {
printk(KERN_ERR "BTRFS: memmove bogus src_offset %lu move "
"len %lu dst len %lu\n", src_offset, len, dst->len);
BUG_ON(1);
}
if (dst_offset + len > dst->len) {
printk(KERN_ERR "BTRFS: memmove bogus dst_offset %lu move "
"len %lu dst len %lu\n", dst_offset, len, dst->len);
BUG_ON(1);
}
while (len > 0) {
dst_off_in_page = (start_offset + dst_offset) &
(PAGE_CACHE_SIZE - 1);
src_off_in_page = (start_offset + src_offset) &
(PAGE_CACHE_SIZE - 1);
dst_i = (start_offset + dst_offset) >> PAGE_CACHE_SHIFT;
src_i = (start_offset + src_offset) >> PAGE_CACHE_SHIFT;
cur = min(len, (unsigned long)(PAGE_CACHE_SIZE -
src_off_in_page));
cur = min_t(unsigned long, cur,
(unsigned long)(PAGE_CACHE_SIZE - dst_off_in_page));
copy_pages(dst->pages[dst_i], dst->pages[src_i],
dst_off_in_page, src_off_in_page, cur);
src_offset += cur;
dst_offset += cur;
len -= cur;
}
}
void memmove_extent_buffer(struct extent_buffer *dst, unsigned long dst_offset,
unsigned long src_offset, unsigned long len)
{
size_t cur;
size_t dst_off_in_page;
size_t src_off_in_page;
unsigned long dst_end = dst_offset + len - 1;
unsigned long src_end = src_offset + len - 1;
size_t start_offset = dst->start & ((u64)PAGE_CACHE_SIZE - 1);
unsigned long dst_i;
unsigned long src_i;
if (src_offset + len > dst->len) {
printk(KERN_ERR "BTRFS: memmove bogus src_offset %lu move "
"len %lu len %lu\n", src_offset, len, dst->len);
BUG_ON(1);
}
if (dst_offset + len > dst->len) {
printk(KERN_ERR "BTRFS: memmove bogus dst_offset %lu move "
"len %lu len %lu\n", dst_offset, len, dst->len);
BUG_ON(1);
}
if (dst_offset < src_offset) {
memcpy_extent_buffer(dst, dst_offset, src_offset, len);
return;
}
while (len > 0) {
dst_i = (start_offset + dst_end) >> PAGE_CACHE_SHIFT;
src_i = (start_offset + src_end) >> PAGE_CACHE_SHIFT;
dst_off_in_page = (start_offset + dst_end) &
(PAGE_CACHE_SIZE - 1);
src_off_in_page = (start_offset + src_end) &
(PAGE_CACHE_SIZE - 1);
cur = min_t(unsigned long, len, src_off_in_page + 1);
cur = min(cur, dst_off_in_page + 1);
copy_pages(dst->pages[dst_i], dst->pages[src_i],
dst_off_in_page - cur + 1,
src_off_in_page - cur + 1, cur);
dst_end -= cur;
src_end -= cur;
len -= cur;
}
}
int try_release_extent_buffer(struct page *page)
{
struct extent_buffer *eb;
/*
* We need to make sure noboody is attaching this page to an eb right
* now.
*/
spin_lock(&page->mapping->private_lock);
if (!PagePrivate(page)) {
spin_unlock(&page->mapping->private_lock);
return 1;
}
eb = (struct extent_buffer *)page->private;
BUG_ON(!eb);
/*
* This is a little awful but should be ok, we need to make sure that
* the eb doesn't disappear out from under us while we're looking at
* this page.
*/
spin_lock(&eb->refs_lock);
if (atomic_read(&eb->refs) != 1 || extent_buffer_under_io(eb)) {
spin_unlock(&eb->refs_lock);
spin_unlock(&page->mapping->private_lock);
return 0;
}
spin_unlock(&page->mapping->private_lock);
/*
* If tree ref isn't set then we know the ref on this eb is a real ref,
* so just return, this page will likely be freed soon anyway.
*/
if (!test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) {
spin_unlock(&eb->refs_lock);
return 0;
}
return release_extent_buffer(eb);
}