OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/include/asm-ppc/mpc8260.h

103 lines
1.9 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* Since there are many different boards and no standard configuration,
* we have a unique include file for each. Rather than change every
* file that has to include MPC8260 configuration, they all include
* this one and the configuration switching is done here.
*/
#ifdef __KERNEL__
#ifndef __ASM_PPC_MPC8260_H__
#define __ASM_PPC_MPC8260_H__
#ifdef CONFIG_8260
#ifdef CONFIG_EST8260
#include <platforms/est8260.h>
#endif
#ifdef CONFIG_SBC82xx
#include <platforms/sbc82xx.h>
#endif
#ifdef CONFIG_SBS8260
#include <platforms/sbs8260.h>
#endif
#ifdef CONFIG_RPX8260
#include <platforms/rpx8260.h>
#endif
#ifdef CONFIG_WILLOW
#include <platforms/willow.h>
#endif
#ifdef CONFIG_TQM8260
#include <platforms/tqm8260.h>
#endif
#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
#include <platforms/pq2ads.h>
#endif
#ifdef CONFIG_PCI_8260
[PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge This patch adds on-chip PCI bridge support for the PQ2 family. The incomplete existent code is updated with interrupt handling stuff and board-specific bits for 8272ADS and PQ2FADS; the related files were renamed (from m8260_pci to m82xx_pci) to be of more generic fashion. This is tested with 8266ADS and 8272ADS, should work on PQ2FADS as well. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-29 00:52:09 +02:00
#include <syslib/m82xx_pci.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif
/* Make sure the memory translation stuff is there if PCI not used.
*/
#ifndef _IO_BASE
#define _IO_BASE 0
#endif
#ifndef _ISA_MEM_BASE
#define _ISA_MEM_BASE 0
#endif
#ifndef PCI_DRAM_OFFSET
#define PCI_DRAM_OFFSET 0
#endif
/* Map 256MB I/O region
*/
#ifndef IO_PHYS_ADDR
#define IO_PHYS_ADDR 0xe0000000
#endif
#ifndef IO_VIRT_ADDR
#define IO_VIRT_ADDR IO_PHYS_ADDR
#endif
[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC II devices Added ppc_sys device and system definitions for PowerQUICC II devices. This will allow drivers for PQ2 to be proper platform device drivers. Which can be shared on PQ3 processors with the same peripherals. Signed-off-by: Matt McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 00:55:34 +02:00
enum ppc_sys_devices {
MPC82xx_CPM_FCC1,
MPC82xx_CPM_FCC2,
MPC82xx_CPM_FCC3,
MPC82xx_CPM_I2C,
MPC82xx_CPM_SCC1,
MPC82xx_CPM_SCC2,
MPC82xx_CPM_SCC3,
MPC82xx_CPM_SCC4,
MPC82xx_CPM_SPI,
MPC82xx_CPM_MCC1,
MPC82xx_CPM_MCC2,
MPC82xx_CPM_SMC1,
MPC82xx_CPM_SMC2,
MPC82xx_CPM_USB,
MPC82xx_SEC1,
[PATCH] ppc32: board-specific part of fs_enet update This contains board-specific portion to respect driver changes (for 8272ads , 885ads and 866ads). Altered platform_data structures as well as initial setup routines relevant to fs_enet. Changes to the mpc8560ads ppc/ code are also introduced, but mainly as reference, since the entire board support is going to appear in arch/powerpc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 08:00:31 +02:00
MPC82xx_MDIO_BB,
[PATCH] ppc32: Make platform devices being able to assign functions Implemented by modification of the .name field of the platform device, when PDs with the same names are to be used within different drivers, as <device_name> -> <device_name>:<function> Corresponding drivers should change the .name in struct device_driver to reflect upper of course. Added ppc_sys_device_disable/enable function set, making it easier to disable all the inexistent/not utilized platform device way pdevs. By the check of the "disabled" bit in the config field of ppc_sys_specs, disabled platform devices will be either added/removed from the bus, or simply not registered on it, depending on the time when disable/enable call asserted. The default behaviour when nothing is disabled/enabled will be "all devices are enabled", which is the same as before. Also helper platform_notify_map function added, making assignment of board-specific platform_info more consistent and generic. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 20:22:34 +01:00
NUM_PPC_SYS_DEVS,
[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC II devices Added ppc_sys device and system definitions for PowerQUICC II devices. This will allow drivers for PQ2 to be proper platform device drivers. Which can be shared on PQ3 processors with the same peripherals. Signed-off-by: Matt McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 00:55:34 +02:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#ifndef __ASSEMBLY__
/* The "residual" data board information structure the boot loader
* hands to us.
*/
extern unsigned char __res[];
#endif
[PATCH] ppc32: ppc_sys fixes for 8xx and 82xx This patch fixes a numbers of issues regarding to that both 8xx and 82xx began to use ppc_sys model: - Platform is now identified by default deviceless SOC, if no BOARD_CHIP_NAME is specified in the bard-specific header. For the list of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and mpc82xx_sys.c for 8xx and 82xx respectively. - Fixed a bug in identification by name - if the name was not found, it returned -1 instead of default deviceless ppc_spec. - fixed devices amount in the 8xx platform system descriptions Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 02:46:28 +02:00
#ifndef BOARD_CHIP_NAME
#define BOARD_CHIP_NAME ""
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif /* CONFIG_8260 */
#endif /* !__ASM_PPC_MPC8260_H__ */
#endif /* __KERNEL__ */