linux/arch/powerpc/Makefile

328 lines
10 KiB
Makefile
Raw Normal View History

# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
# Changes for PPC by Gary Thomas
# Rewritten by Cort Dougan and Paul Mackerras
#
HAS_BIARCH := $(call cc-option-yn, -m32)
# Set default 32 bits cross compilers for vdso and boot wrapper
CROSS32_COMPILE ?=
CROSS32CC := $(CROSS32_COMPILE)gcc
CROSS32AR := $(CROSS32_COMPILE)ar
ifeq ($(HAS_BIARCH),y)
ifeq ($(CROSS32_COMPILE),)
CROSS32CC := $(CC) -m32
CROSS32AR := GNUTARGET=elf32-powerpc $(AR)
endif
endif
export CROSS32CC CROSS32AR
ifeq ($(CROSS_COMPILE),)
KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
else
KBUILD_DEFCONFIG := ppc64_defconfig
endif
ifeq ($(CONFIG_PPC64),y)
new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
ifeq ($(new_nm),y)
NM := $(NM) --synthetic
endif
endif
ifeq ($(CONFIG_PPC64),y)
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
OLDARCH := ppc64le
else
OLDARCH := ppc64
endif
else
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
OLDARCH := ppcle
else
OLDARCH := ppc
endif
endif
# It seems there are times we use this Makefile without
# including the config file, but this replicates the old behaviour
ifeq ($(CONFIG_WORD_SIZE),)
CONFIG_WORD_SIZE := 32
endif
UTS_MACHINE := $(OLDARCH)
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
override CC += -mlittle-endian -mno-strict-align
override AS += -mlittle-endian
override LD += -EL
override CROSS32CC += -mlittle-endian
override CROSS32AS += -mlittle-endian
LDEMULATION := lppc
GNUTARGET := powerpcle
MULTIPLEWORD := -mno-multiple
else
ifeq ($(call cc-option-yn,-mbig-endian),y)
override CC += -mbig-endian
override AS += -mbig-endian
endif
override LD += -EB
LDEMULATION := ppc
GNUTARGET := powerpc
MULTIPLEWORD := -mmultiple
endif
ifeq ($(HAS_BIARCH),y)
override AS += -a$(CONFIG_WORD_SIZE)
override LD += -m elf$(CONFIG_WORD_SIZE)$(LDEMULATION)
override CC += -m$(CONFIG_WORD_SIZE)
override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-$(GNUTARGET) $(AR)
endif
LDFLAGS_vmlinux-y := -Bstatic
LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
ifeq ($(CONFIG_PPC64),y)
ifeq ($(call cc-option-yn,-mcmodel=medium),y)
# -mcmodel=medium breaks modules because it uses 32bit offsets from
# the TOC pointer to create pointers where possible. Pointers into the
# percpu data area are created by this method.
#
# The kernel module loader relocates the percpu data section from the
# original location (starting with 0xd...) to somewhere in the base
# kernel percpu data space (starting with 0xc...). We need a full
# 64bit relocation for this to work, hence -mcmodel=large.
KBUILD_CFLAGS_MODULE += -mcmodel=large
else
export NO_MINIMAL_TOC := -mno-minimal-toc
endif
endif
CFLAGS-$(CONFIG_PPC64) := -mtraceback=no -mcall-aixdesc
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD)
ifeq ($(CONFIG_PPC_BOOK3S_64),y)
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
else
CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
endif
CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4)
CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
# Altivec option not allowed with e500mc64 in GCC.
ifeq ($(CONFIG_ALTIVEC),y)
E5500_CPU := -mcpu=powerpc64
else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
ifeq ($(CONFIG_PPC32),y)
ifeq ($(CONFIG_PPC_E500MC),y)
CFLAGS-y += $(call cc-option,-mcpu=e500mc,-mcpu=powerpc)
else
CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
endif
endif
CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
KBUILD_CPPFLAGS += -Iarch/$(ARCH)
KBUILD_AFLAGS += -Iarch/$(ARCH)
KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
# No AltiVec or VSX instructions when building kernel
KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
KBUILD_CFLAGS += $(call cc-option,-mno-vsx)
# No SPE instruction when building kernel
# (We use all available options to help semi-broken compilers)
KBUILD_CFLAGS += $(call cc-option,-mno-spe)
KBUILD_CFLAGS += $(call cc-option,-mspe=no)
# Enable unit-at-a-time mode when possible. It shrinks the
# kernel considerably.
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
# FIXME: the module load should be taught about the additional relocs
# generated by this.
# revert to pre-gcc-4.4 behaviour of .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
# Never use string load/store instructions as they are
# often slow when they are implemented at all
KBUILD_CFLAGS += -mno-string
ifeq ($(CONFIG_6xx),y)
KBUILD_CFLAGS += -mcpu=powerpc
endif
# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
ifeq ($(CONFIG_FUNCTION_TRACER),y)
KBUILD_CFLAGS += -mno-sched-epilog
endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
cpu-as-$(CONFIG_E200) += -Wa,-me200
KBUILD_AFLAGS += $(cpu-as-y)
KBUILD_CFLAGS += $(cpu-as-y)
head-y := arch/powerpc/kernel/head_$(CONFIG_WORD_SIZE).o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o
head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o
head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o
head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
head-$(CONFIG_ALTIVEC) += arch/powerpc/kernel/vector.o
head-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += arch/powerpc/kernel/prom_init.o
core-y += arch/powerpc/kernel/ \
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/ \
arch/powerpc/math-emu/ \
arch/powerpc/crypto/ \
arch/powerpc/net/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_KVM) += arch/powerpc/kvm/
core-$(CONFIG_PERF_EVENTS) += arch/powerpc/perf/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
# Default to zImage, override when needed
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 19:18:34 +01:00
all: zImage
# With make 3.82 we cannot mix normal and wildcard targets
BOOT_TARGETS1 := zImage zImage.initrd uImage
BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
boot := arch/$(ARCH)/boot
ifeq ($(CONFIG_RELOCATABLE),y)
quiet_cmd_relocs_check = CALL $<
cmd_relocs_check = perl $< "$(OBJDUMP)" "$(obj)/vmlinux"
PHONY += relocs_check
relocs_check: arch/powerpc/relocs_check.pl vmlinux
$(call cmd,relocs_check)
zImage: relocs_check
endif
$(BOOT_TARGETS1): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
$(BOOT_TARGETS2): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
bootwrapper_install:
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
%.dtb: scripts
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
define archhelp
@echo '* zImage - Build default images selected by kernel config'
@echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
@echo ' uImage - U-Boot native image format'
@echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
@echo ' versions which do not support device trees'
@echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
@echo ' simpleImage.<dt> - Firmware independent image.'
@echo ' treeImage.<dt> - Support for older IBM 4xx firmware (not U-Boot)'
@echo ' install - Install kernel using'
kbuild: use INSTALLKERNEL to select customized installkernel script Replace the use of CROSS_COMPILE to select a customized installkernel script with the possibility to set INSTALLKERNEL to select a custom installkernel script when running make: make INSTALLKERNEL=arm-installkernel install With this patch we are now more consistent across different architectures - they did not all support use of CROSS_COMPILE. The use of CROSS_COMPILE was a hack as this really belongs to gcc/binutils and the installkernel script does not change just because we change toolchain. The use of CROSS_COMPILE caused troubles with an upcoming patch that saves CROSS_COMPILE when a kernel is built - it would no longer be installable. [Thanks to Peter Z. for this hint] This patch undos what Ian did in commit: 0f8e2d62fa04441cd12c08ce521e84e5bd3f8a46 ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh") The patch has been lightly tested on x86 only - but all changes looks obvious. Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Russell King <linux@arm.linux.org.uk> [arm] Acked-by: Paul Mundt <lethal@linux-sh.org> [sh] Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86] Cc: Ian Campbell <icampbell@arcom.com> Cc: Tony Luck <tony.luck@intel.com> [ia64] Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64] Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Cc: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Ingo Molnar <mingo@redhat.com> [x86] Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-20 21:37:11 +02:00
@echo ' (your) ~/bin/$(INSTALLKERNEL) or'
@echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
@echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
@echo ''
@echo ' Targets with <dt> embed a device tree blob inside the image'
@echo ' These targets support board with firmware that does not'
@echo ' support passing a device tree directly. Replace <dt> with the'
@echo ' name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
@echo ' (minus the .dts extension).'
endef
install:
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 19:18:34 +01:00
$(Q)$(MAKE) $(build)=$(boot) install
vdso_install:
ifeq ($(CONFIG_PPC64),y)
$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
endif
$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
archprepare: checkbin
# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
# to stdout and these checks are run even on install targets.
TOUT := .tmp_gas_check
# Check gcc and binutils versions:
# - gcc-3.4 and binutils-2.14 are a fatal combination
# - Require gcc 4.0 or above on 64-bit
# - gcc-4.2.0 has issues compiling modules on 64-bit
checkbin:
@if test "$(call cc-version)" = "0304" ; then \
if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
echo 'correctly with gcc-3.4 and your version of binutils.'; \
echo '*** Please upgrade your binutils or downgrade your gcc'; \
false; \
fi ; \
fi
@if test "$(call cc-version)" -lt "0400" \
&& test "x${CONFIG_PPC64}" = "xy" ; then \
echo -n "Sorry, GCC v4.0 or above is required to build " ; \
echo "the 64-bit powerpc kernel." ; \
false ; \
fi
@if test "$(call cc-fullversion)" = "040200" \
&& test "x${CONFIG_MODULES}${CONFIG_PPC64}" = "xyy" ; then \
echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \
echo 'kernel with modules enabled.' ; \
echo -n '*** Please use a different GCC version or ' ; \
echo 'disable kernel modules' ; \
false ; \
fi
CLEAN_FILES += $(TOUT)