linux/drivers/mfd/wm8994-irq.c

270 lines
6.1 KiB
C
Raw Normal View History

/*
* wm8994-irq.c -- Interrupt controller support for Wolfson WM8994
*
* Copyright 2010 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/regmap.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/delay.h>
static struct regmap_irq wm8994_irqs[] = {
[WM8994_IRQ_TEMP_SHUT] = {
.reg_offset = 1,
.mask = WM8994_TEMP_SHUT_EINT,
},
[WM8994_IRQ_MIC1_DET] = {
.reg_offset = 1,
.mask = WM8994_MIC1_DET_EINT,
},
[WM8994_IRQ_MIC1_SHRT] = {
.reg_offset = 1,
.mask = WM8994_MIC1_SHRT_EINT,
},
[WM8994_IRQ_MIC2_DET] = {
.reg_offset = 1,
.mask = WM8994_MIC2_DET_EINT,
},
[WM8994_IRQ_MIC2_SHRT] = {
.reg_offset = 1,
.mask = WM8994_MIC2_SHRT_EINT,
},
[WM8994_IRQ_FLL1_LOCK] = {
.reg_offset = 1,
.mask = WM8994_FLL1_LOCK_EINT,
},
[WM8994_IRQ_FLL2_LOCK] = {
.reg_offset = 1,
.mask = WM8994_FLL2_LOCK_EINT,
},
[WM8994_IRQ_SRC1_LOCK] = {
.reg_offset = 1,
.mask = WM8994_SRC1_LOCK_EINT,
},
[WM8994_IRQ_SRC2_LOCK] = {
.reg_offset = 1,
.mask = WM8994_SRC2_LOCK_EINT,
},
[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
.reg_offset = 1,
.mask = WM8994_AIF1DRC1_SIG_DET,
},
[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
.reg_offset = 1,
.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
},
[WM8994_IRQ_AIF2DRC_SIG_DET] = {
.reg_offset = 1,
.mask = WM8994_AIF2DRC_SIG_DET_EINT,
},
[WM8994_IRQ_FIFOS_ERR] = {
.reg_offset = 1,
.mask = WM8994_FIFOS_ERR_EINT,
},
[WM8994_IRQ_WSEQ_DONE] = {
.reg_offset = 1,
.mask = WM8994_WSEQ_DONE_EINT,
},
[WM8994_IRQ_DCS_DONE] = {
.reg_offset = 1,
.mask = WM8994_DCS_DONE_EINT,
},
[WM8994_IRQ_TEMP_WARN] = {
.reg_offset = 1,
.mask = WM8994_TEMP_WARN_EINT,
},
[WM8994_IRQ_GPIO(1)] = {
.mask = WM8994_GP1_EINT,
},
[WM8994_IRQ_GPIO(2)] = {
.mask = WM8994_GP2_EINT,
},
[WM8994_IRQ_GPIO(3)] = {
.mask = WM8994_GP3_EINT,
},
[WM8994_IRQ_GPIO(4)] = {
.mask = WM8994_GP4_EINT,
},
[WM8994_IRQ_GPIO(5)] = {
.mask = WM8994_GP5_EINT,
},
[WM8994_IRQ_GPIO(6)] = {
.mask = WM8994_GP6_EINT,
},
[WM8994_IRQ_GPIO(7)] = {
.mask = WM8994_GP7_EINT,
},
[WM8994_IRQ_GPIO(8)] = {
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(9)] = {
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(10)] = {
.mask = WM8994_GP10_EINT,
},
[WM8994_IRQ_GPIO(11)] = {
.mask = WM8994_GP11_EINT,
},
};
static struct regmap_irq_chip wm8994_irq_chip = {
.name = "wm8994",
.irqs = wm8994_irqs,
.num_irqs = ARRAY_SIZE(wm8994_irqs),
.num_regs = 2,
.status_base = WM8994_INTERRUPT_STATUS_1,
.mask_base = WM8994_INTERRUPT_STATUS_1_MASK,
.ack_base = WM8994_INTERRUPT_STATUS_1,
.runtime_pm = true,
};
static void wm8994_edge_irq_enable(struct irq_data *data)
{
}
static void wm8994_edge_irq_disable(struct irq_data *data)
{
}
static struct irq_chip wm8994_edge_irq_chip = {
.name = "wm8994_edge",
.irq_disable = wm8994_edge_irq_disable,
.irq_enable = wm8994_edge_irq_enable,
};
static irqreturn_t wm8994_edge_irq(int irq, void *data)
{
struct wm8994 *wm8994 = data;
while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
return IRQ_HANDLED;
}
static int wm8994_edge_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct wm8994 *wm8994 = h->host_data;
irq_set_chip_data(virq, wm8994);
irq_set_chip_and_handler(virq, &wm8994_edge_irq_chip, handle_edge_irq);
irq_set_nested_thread(virq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(virq, IRQF_VALID);
#else
irq_set_noprobe(virq);
#endif
return 0;
}
static struct irq_domain_ops wm8994_edge_irq_ops = {
.map = wm8994_edge_irq_map,
.xlate = irq_domain_xlate_twocell,
};
int wm8994_irq_init(struct wm8994 *wm8994)
{
int ret;
unsigned long irqflags;
struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev);
if (!wm8994->irq) {
dev_warn(wm8994->dev,
"No interrupt specified, no interrupts\n");
wm8994->irq_base = 0;
return 0;
}
/* select user or default irq flags */
irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
if (pdata->irq_flags)
irqflags = pdata->irq_flags;
/* use a GPIO for edge triggered controllers */
if (irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
if (gpio_to_irq(pdata->irq_gpio) != wm8994->irq) {
dev_warn(wm8994->dev, "IRQ %d is not GPIO %d (%d)\n",
wm8994->irq, pdata->irq_gpio,
gpio_to_irq(pdata->irq_gpio));
wm8994->irq = gpio_to_irq(pdata->irq_gpio);
}
ret = devm_gpio_request_one(wm8994->dev, pdata->irq_gpio,
GPIOF_IN, "WM8994 IRQ");
if (ret != 0) {
dev_err(wm8994->dev, "Failed to get IRQ GPIO: %d\n",
ret);
return ret;
}
wm8994->edge_irq = irq_domain_add_linear(NULL, 1,
&wm8994_edge_irq_ops,
wm8994);
ret = regmap_add_irq_chip(wm8994->regmap,
irq_create_mapping(wm8994->edge_irq,
0),
IRQF_ONESHOT,
wm8994->irq_base, &wm8994_irq_chip,
&wm8994->irq_data);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to get IRQ: %d\n",
ret);
return ret;
}
ret = request_threaded_irq(wm8994->irq,
NULL, wm8994_edge_irq,
irqflags,
"WM8994 edge", wm8994);
} else {
ret = regmap_add_irq_chip(wm8994->regmap, wm8994->irq,
irqflags,
wm8994->irq_base, &wm8994_irq_chip,
&wm8994->irq_data);
}
if (ret != 0) {
dev_err(wm8994->dev, "Failed to register IRQ chip: %d\n", ret);
return ret;
}
/* Enable top level interrupt if it was masked */
wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
return 0;
}
void wm8994_irq_exit(struct wm8994 *wm8994)
{
regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);
}