OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/drivers/irqchip/Kconfig

295 lines
4.8 KiB
Plaintext
Raw Normal View History

irqchip: add basic infrastructure With the recent creation of the drivers/irqchip/ directory, it is desirable to move irq controller drivers here. At the moment, the only driver here is irq-bcm2835, the driver for the irq controller found in the ARM BCM2835 SoC, present in Rasberry Pi systems. This irq controller driver was exporting its initialization function and its irq handling function through a header file in <linux/irqchip/bcm2835.h>. When proposing to also move another irq controller driver in drivers/irqchip, Rob Herring raised the very valid point that moving things to drivers/irqchip was good in order to remove more stuff from arch/arm, but if it means adding gazillions of headers files in include/linux/irqchip/, it would not be very nice. So, upon the suggestion of Rob Herring and Arnd Bergmann, this commit introduces a small infrastructure that defines a central irqchip_init() function in drivers/irqchip/irqchip.c, which is meant to be called as the ->init_irq() callback of ARM platforms. This function calls of_irq_init() with an array of match strings and init functions generated from a special linker section. Note that the irq controller driver initialization function is responsible for setting the global handle_arch_irq() variable, so that ARM platforms no longer have to define the ->handle_irq field in their DT_MACHINE structure. A global header, <linux/irqchip.h> is also added to expose the single irqchip_init() function to the reset of the kernel. A further commit moves the BCM2835 irq controller driver to this new small infrastructure, therefore removing the include/linux/irqchip/ directory. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [rob.herring: reword commit message to reflect use of linker sections.] Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-20 23:00:52 +01:00
config IRQCHIP
def_bool y
depends on OF_IRQ
irqchip: Move ARM GIC to drivers/irqchip Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This is necessary to share the GIC with arm and arm64. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-11-21 04:21:40 +01:00
config ARM_GIC
bool
select IRQ_DOMAIN
irqchip: gic: Support hierarchy irq domain. Add support to use gic as a parent for stacked irq domain. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416902662-19281-2-git-send-email-yingjoe.chen@mediatek.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-25 09:04:19 +01:00
select IRQ_DOMAIN_HIERARCHY
irqchip: Move ARM GIC to drivers/irqchip Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This is necessary to share the GIC with arm and arm64. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-11-21 04:21:40 +01:00
select MULTI_IRQ_HANDLER
irqchip/gic: Add platform driver for non-root GICs that require RPM Add a platform driver to support non-root GICs that require runtime power-management. Currently, only non-root GICs are supported because the functions, smp_cross_call() and set_handle_irq(), that need to be called for a root controller are located in the __init section and so cannot be called by the platform driver. The GIC platform driver re-uses many functions from the existing GIC driver including some functions to save and restore the GIC context during power transitions. The functions for saving and restoring the GIC context are currently only defined if CONFIG_CPU_PM is enabled and to ensure that these functions are always defined when the platform driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the platform driver) has been added. In order to re-use the private GIC initialisation code, a new public function, gic_of_init_child(), has been added which calls various private functions to initialise the GIC. This is different from the existing gic_of_init() because it only supports non-root GICs (ie. does not call smp_cross_call() is set_handle_irq()) and is not located in the __init section (so can be used by platform drivers). Furthermore, gic_of_init_child() dynamically allocates memory for the GIC chip data which is also different from gic_of_init(). There is no specific suspend handling for GICs registered as platform devices. Non-wakeup interrupts will be disabled by the kernel during late suspend, however, this alone will not power down the GIC if interrupts have been requested and not freed. Therefore, requestors of non-wakeup interrupts will need to free them on entering suspend in order to power-down the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 17:12:34 +02:00
config ARM_GIC_PM
bool
depends on PM
select ARM_GIC
select PM_CLK
irqchip/gic: Kconfig the number of instances There is currently a hack in the GIC driver making it possible to pass the number of GIC instances from the platform-specific include files and thus override the variable MAX_GIC_NR. With multiplatform deployments, this will not work as we need to get rid of the platform-specific include files. It turns out that this feature is only used by the RealView platform which has a cascaded GIC. So move the configuration to Kconfig and bump to 2 instances if we're building for the RealView. The include file hacks can then be removed. Tested on the ARM PB11MPCore with its cascaded GIC. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18 10:44:53 +01:00
config ARM_GIC_MAX_NR
int
default 2 if ARCH_REALVIEW
default 1
irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell ARM GICv2m specification extends GICv2 to support MSI(-X) with a new register frame. This allows a GICv2 based system to support MSI with minimal changes. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> [maz: converted the driver to use stacked irq domains, updated changelog] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416941243-7181-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-25 19:47:22 +01:00
config ARM_GIC_V2M
bool
PCI/MSI: irqchip: Fix PCI_MSI dependencies The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-15 22:47:33 +02:00
depends on PCI
select ARM_GIC
select PCI_MSI
irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell ARM GICv2m specification extends GICv2 to support MSI(-X) with a new register frame. This allows a GICv2 based system to support MSI with minimal changes. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> [maz: converted the driver to use stacked irq domains, updated changelog] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416941243-7181-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-25 19:47:22 +01:00
irqchip: Move ARM GIC to drivers/irqchip Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This is necessary to share the GIC with arm and arm64. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-11-21 04:21:40 +01:00
config GIC_NON_BANKED
bool
irqchip: gic-v3: Initial support for GICv3 The Generic Interrupt Controller (version 3) offers services that are similar to GICv2, with a number of additional features: - Affinity routing based on the CPU MPIDR (ARE) - System register for the CPU interfaces (SRE) - Support for more that 8 CPUs - Locality-specific Peripheral Interrupts (LPIs) - Interrupt Translation Services (ITS) This patch adds preliminary support for GICv3 with ARE and SRE, non-secure mode only. It relies on higher exception levels to grant ARE and SRE access. Support for LPI and ITS will be added at a later time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Zi Shen Lim <zlim@broadcom.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Reviewed-by: Yun Wu <wuyun.wu@huawei.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com> Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30 17:01:31 +02:00
config ARM_GIC_V3
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
irqchip: GICv3: Convert to domain hierarchy In order to start supporting stacked domains, convert the GICv3 code base to the new domain hierarchy framework, which mostly amounts to supporting the new alloc/free callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-24 15:35:09 +01:00
select IRQ_DOMAIN_HIERARCHY
irqchip/gic-v3: Add support for partitioned PPIs Plug the partitioning layer into the GICv3 PPI code, parsing the DT and building the partition affinities and providing the generic code with partition data and callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-11 10:57:54 +02:00
select PARTITION_PERCPU
irqchip: gic-v3: Initial support for GICv3 The Generic Interrupt Controller (version 3) offers services that are similar to GICv2, with a number of additional features: - Affinity routing based on the CPU MPIDR (ARE) - System register for the CPU interfaces (SRE) - Support for more that 8 CPUs - Locality-specific Peripheral Interrupts (LPIs) - Interrupt Translation Services (ITS) This patch adds preliminary support for GICv3 with ARE and SRE, non-secure mode only. It relies on higher exception levels to grant ARE and SRE access. Support for LPI and ITS will be added at a later time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Zi Shen Lim <zlim@broadcom.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Reviewed-by: Yun Wu <wuyun.wu@huawei.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com> Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30 17:01:31 +02:00
irqchip: GICv3: ITS: enable compilation of the ITS driver Get the show on the road... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-13-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-24 15:35:19 +01:00
config ARM_GIC_V3_ITS
bool
PCI/MSI: irqchip: Fix PCI_MSI dependencies The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-15 22:47:33 +02:00
depends on PCI
depends on PCI_MSI
irqchip/gicv3-its: Probe ITS in the ACPI way ITS is prepared for being initialized different than DT, therefore we can initialize it in ACPI way. We collect register base address from MADT table and pass mandatory info to firmware-agnostic ITS init call. Use here IORT lib to register ITS domain which then can be found and used on to build another PCI MSI domain in hierarchical stack domain. NOTE: Waiting for proper ITS and NUMA node relation description in IORT table, we pass around NUMA_NO_NODE to the its_probe_one init call. This means that Cavium ThunderX erratum 23144 (pass1.1 only) is not supported for ACPI boot method yet. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 20:32:25 +02:00
select ACPI_IORT if ACPI
irqchip: gic-v3: Initial support for GICv3 The Generic Interrupt Controller (version 3) offers services that are similar to GICv2, with a number of additional features: - Affinity routing based on the CPU MPIDR (ARE) - System register for the CPU interfaces (SRE) - Support for more that 8 CPUs - Locality-specific Peripheral Interrupts (LPIs) - Interrupt Translation Services (ITS) This patch adds preliminary support for GICv3 with ARE and SRE, non-secure mode only. It relies on higher exception levels to grant ARE and SRE access. Support for LPI and ITS will be added at a later time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Zi Shen Lim <zlim@broadcom.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Reviewed-by: Yun Wu <wuyun.wu@huawei.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com> Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30 17:01:31 +02:00
irqchip: Add support for ARMv7-M NVIC This interrupt controller is integrated in all Cortex-M3 and Cortex-M4 machines. Support for this controller appeared in Catalin's Cortex tree based on 2.6.33 but was nearly completely rewritten. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-arm-kernel@lists.infradead.org Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/1372231128-11802-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-26 09:18:48 +02:00
config ARM_NVIC
bool
select IRQ_DOMAIN
irqchip: nvic: Support hierarchy irq domain Add support for hierarchy irq domains. This is required to stack the MSCM interrupt router and the NVIC controller found in Vybrid SoC. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: marc.zyngier@arm.com Cc: linux@arm.linux.org.uk Cc: u.kleine-koenig@pengutronix.de Cc: olof@lixom.net Cc: arnd@arndb.de Cc: daniel.lezcano@linaro.org Cc: mark.rutland@arm.com Cc: pawel.moll@arm.com Cc: robh+dt@kernel.org Cc: ijc+devicetree@hellion.org.uk Cc: galak@codeaurora.org Cc: mcoquelin.stm32@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: shawn.guo@linaro.org Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1431769465-26867-5-git-send-email-stefan@agner.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-16 11:44:16 +02:00
select IRQ_DOMAIN_HIERARCHY
irqchip: Add support for ARMv7-M NVIC This interrupt controller is integrated in all Cortex-M3 and Cortex-M4 machines. Support for this controller appeared in Catalin's Cortex tree based on 2.6.33 but was nearly completely rewritten. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-arm-kernel@lists.infradead.org Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/1372231128-11802-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-26 09:18:48 +02:00
select GENERIC_IRQ_CHIP
irqchip: Move ARM VIC to drivers/irqchip Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-10-28 00:25:26 +02:00
config ARM_VIC
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
config ARM_VIC_NR
int
default 4 if ARCH_S5PV210
default 2
depends on ARM_VIC
help
The maximum number of VICs available in the system, for
power management.
irqchip/armada-370-xp: Add Kconfig option for the driver Instead of building the irq-armada-370-xp driver directly when CONFIG_ARCH_MVEBU is enabled, this commit introduces an intermediate CONFIG_ARMADA_370_XP_IRQ hidden Kconfig option. This allows this option to select other interrupt-related Kconfig options (which will be needed in follow-up commits) rather than having such selects done from arch/arm/mach-<foo>/. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-10 15:46:56 +01:00
config ARMADA_370_XP_IRQ
bool
select GENERIC_IRQ_CHIP
PCI/MSI: irqchip: Fix PCI_MSI dependencies The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-15 22:47:33 +02:00
select PCI_MSI if PCI
irqchip/armada-370-xp: Add Kconfig option for the driver Instead of building the irq-armada-370-xp driver directly when CONFIG_ARCH_MVEBU is enabled, this commit introduces an intermediate CONFIG_ARMADA_370_XP_IRQ hidden Kconfig option. This allows this option to select other interrupt-related Kconfig options (which will be needed in follow-up commits) rather than having such selects done from arch/arm/mach-<foo>/. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-10 15:46:56 +01:00
irqchip: Add the Alpine MSIX interrupt controller This patch adds the Alpine MSIX interrupt controller driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-19 16:22:44 +01:00
config ALPINE_MSI
bool
PCI/MSI: irqchip: Fix PCI_MSI dependencies The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-15 22:47:33 +02:00
depends on PCI
select PCI_MSI
irqchip: Add the Alpine MSIX interrupt controller This patch adds the Alpine MSIX interrupt controller driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-19 16:22:44 +01:00
select GENERIC_IRQ_CHIP
irqchip: atmel-aic: Add atmel AIC/AIC5 drivers Add AIC (Advanced Interrupt Controller) and AIC5 (AIC5 is an evolution of the AIC block) drivers. Put common code in irq-atmel-aic-common.c/.h so that both driver can access shared functions (this will ease maintenance). These drivers are only compatible with dt enabled board and replace the old implementation found in arch/arm/mach-at91/irq.c. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Link: https://lkml.kernel.org/r/1405012462-766-4-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-10 19:14:18 +02:00
config ATMEL_AIC_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config ATMEL_AIC5_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
MIPS/irqchip: Move i8259 irqchip driver to drivers/irqchip Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-08 14:46:08 +02:00
config I8259
bool
select IRQ_DOMAIN
irqchips/bmips: Add bcm6345-l1 interrupt controller Add the BCM6345 interrupt controller based on the SMP-capable BCM7038 and the BCM3380 but with packed interrupt registers. Add the BCM6345 interrupt controller to a list with the existing BCM7038 so that interrupts on CPU1 are not ignored. Update the maintainers file list for BMIPS to include this driver. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Pawel Moll <pawel.moll@arm.com> Cc: linux-mips@linux-mips.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Rob Herring <robh@kernel.org> Link: http://lkml.kernel.org/r/5651D176.6030908@simon.arlott.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-22 15:30:14 +01:00
config BCM6345_L1_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers This is the main peripheral IRQ controller on the BCM7xxx MIPS chips; it has the following characteristics: - 64 to 160+ level IRQs - Atomic set/clear registers - Reasonably predictable register layout (N status words, then N mask status words, then N mask set words, then N mask clear words) - SMP affinity supported on most systems - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3 This driver registers one IRQ domain and one IRQ chip to cover all instances of the block. Up to 4 instances of the block may appear, as it supports 4-way IRQ affinity on BCM7435. The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC is used instead. So this driver is primarily intended for MIPS STB chips. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-25 18:49:06 +01:00
config BCM7038_L1_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
irqchip: bcm7120-l2: Decouple driver from brcmstb-l2 Some chips, such as BCM6328, only require bcm7120-l2. Some BCM7xxx STB configurations only require brcmstb-l2. Treat them as two separate entities, and update the mach-bcm dependencies to reflect the change. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-13-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-07 07:44:27 +01:00
config BCM7120_L2_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller This patch adds support for the Level-2 interrupt controller hardware found in Broadcom Set Top Box System-on-a-Chip devices. This interrupt controller is implemented using the generic IRQ chip driver with separate enable and disable registers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Link: https://lkml.kernel.org/r/1400892054-24457-2-git-send-email-f.fainelli@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-24 02:40:53 +02:00
config BRCMSTB_L2_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
irqchip: add DesignWare APB ICTL interrupt controller This adds an irqchip driver and corresponding devicetree binding for the secondary interrupt controllers based on Synopsys DesignWare IP dw_apb_ictl. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2013-09-09 14:01:20 +02:00
config DW_APB_ICTL
bool
irqchip: dw-apb-ictl: Select GENERIC_IRQ_CHIP The dw-apb-ictl driver uses the generic-chip functions. Thus it needs to select GENERIC_IRQ_CHIP in Kconfig. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Link: https://lkml.kernel.org/r/1413982750-832-1-git-send-email-jszhang@marvell.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-10-22 14:59:10 +02:00
select GENERIC_IRQ_CHIP
irqchip: add DesignWare APB ICTL interrupt controller This adds an irqchip driver and corresponding devicetree binding for the secondary interrupt controllers based on Synopsys DesignWare IP dw_apb_ictl. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2013-09-09 14:01:20 +02:00
select IRQ_DOMAIN
irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option This config is selected by CONFIG_ARCH_HISI, so there is no point to have it user configurable. While at it move the config option to the proper place in the alphabetically sorted option list. Requested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ma Jun <majun258@huawei.com> Cc: mark.rutland@arm.com Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: Catalin.Marinas@arm.com Cc: guohanjun@huawei.com Cc: Will.Deacon@arm.com Cc: huxinwei@huawei.com Cc: lizefan@huawei.com Cc: dingtianhong@huawei.com Cc: zhaojunhua@hisilicon.com Cc: liguozhu@hisilicon.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1458723993-21044-3-git-send-email-majun258@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-23 10:06:33 +01:00
config HISILICON_IRQ_MBIGEN
bool
select ARM_GIC_V3
select ARM_GIC_V3_ITS
irq-imgpdc: add ImgTec PDC irqchip driver Add irqchip driver for the ImgTec PowerDown Controller (PDC) as found in the TZ1090. The PDC has a number of general system wakeup (SysWake) interrupts (which would for example be connected to a power button or an external peripheral), and a number of peripheral interrupts which can also wake the system but are connected straight to specific low-power peripherals (such as RTC or Infrared). It has a single interrupt output for SysWakes, and individual interrupt outputs for each peripheral. The driver demuxes the SysWake interrupt line, and passes the peripheral interrupts straight through. It also handles the set_wake interrupt operation to enable/disable the appropriate wake event bits. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: linux-metag@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
2013-04-22 16:43:50 +02:00
config IMGPDC_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip. While at it, rename it because in drivers/irqchip no longer every CPU is a MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-26 18:20:06 +02:00
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
ARM: clps711x: Add CLPS711X irqchip driver This adds the irqchip driver for Cirrus Logic CLPS711X series SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-02 09:07:46 +01:00
config CLPS711X_IRQCHIP
bool
depends on ARCH_CLPS711X
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
default y
irqchip: or1k-pic: Migrate from arch/openrisc/ In addition to consolidating the or1k-pic with other interrupt controllers, this makes OpenRISC less tied to its on-cpu interrupt controller. All or1k-pic specific parts are moved out of irq.c and into drivers/irqchip/irq-or1k-pic.c In that transition, the functionality have been divided into three chip variants. One that handles level triggered interrupts, one that handles edge triggered interrupts and one that handles the interrupt controller that is present in the or1200 OpenRISC cpu implementation. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Link: https://lkml.kernel.org/r/1401136302-27654-1-git-send-email-stefan.kristiansson@saunalahti.fi Acked-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-26 22:31:42 +02:00
config OR1K_PIC
bool
select IRQ_DOMAIN
arm: omap: irq: move irq.c to drivers/irqchip/ Just move the code over as it has no dependencies on arch/arm/ anymore. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-15 23:15:02 +02:00
config OMAP_IRQCHIP
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
irqchip: Add support for Marvell Orion SoCs This patch adds an irqchip driver for the main interrupt controller found on Marvell Orion SoCs (Kirkwood, Dove, Orion5x, Discovery Innovation). Corresponding device tree documentation is also added. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1370536034-23956-2-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-06 18:27:09 +02:00
config ORION_IRQCHIP
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controller This adds support for the interrupt controller present on PIC32 class devices. It handles all internal and external interrupts. This controller exists outside of the CPU core and is the arbitrator of all interrupts (including interrupts from the CPU itself) before they are presented to the CPU. The following features are supported: - DT properties for EVIC and for devices/peripherals that use interrupt lines - Persistent and non-persistent interrupt handling - irqdomain and generic chip support - Configuration of external interrupt edge polarity Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-14 02:15:35 +01:00
config PIC32_EVIC
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
irqchip/jcore-aic: Add J-Core AIC driver There are two versions of the J-Core interrupt controller in use, aic1 which generates interrupts with programmable priorities, but only supports 8 irq lines and maps them to cpu traps in the range 17 to 24, and aic2 which uses traps in the range 64-127 and supports up to 128 irqs, with priorities dependent on the interrupt number. The Linux driver does not make use of priorities anyway. For simplicity, there is no aic1-specific logic in the driver beyond setting the priority register, which is necessary for interrupts to work at all. Eventually aic1 will likely be phased out, but it's currently in use in deployments and all released bitstream binaries. Signed-off-by: Rich Felker <dalias@libc.org> Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-04 06:30:37 +02:00
config JCORE_AIC
irqchip/jcore: Don't show Kconfig menu item for driver Core drivers for J-Core SoCs will be selected implicitly via CONFIG_SH_JCORE_SOC instead. Based on a corresponding change to the clocksource/timer driver requested by Daniel Lezcano. Signed-off-by: Rich Felker <dalias@libc.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-sh@vger.kernel.org Link: http://lkml.kernel.org/r/883a3d17084003e3cf21bab73ec12828fe4ff6c6.1476899495.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-19 19:53:52 +02:00
bool "J-Core integrated AIC" if COMPILE_TEST
depends on OF
irqchip/jcore-aic: Add J-Core AIC driver There are two versions of the J-Core interrupt controller in use, aic1 which generates interrupts with programmable priorities, but only supports 8 irq lines and maps them to cpu traps in the range 17 to 24, and aic2 which uses traps in the range 64-127 and supports up to 128 irqs, with priorities dependent on the interrupt number. The Linux driver does not make use of priorities anyway. For simplicity, there is no aic1-specific logic in the driver beyond setting the priority register, which is necessary for interrupts to work at all. Eventually aic1 will likely be phased out, but it's currently in use in deployments and all released bitstream binaries. Signed-off-by: Rich Felker <dalias@libc.org> Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-04 06:30:37 +02:00
select IRQ_DOMAIN
help
Support for the J-Core integrated AIC.
irqchip: Renesas INTC External IRQ pin driver This patch adds a driver for external IRQ pins connected to the INTC block on recent SoCs from Renesas. The INTC hardware block usually contains a rather wide range of features ranging from external IRQ pin handling to legacy interrupt controller support. On older SoCs the INTC is used as a general purpose interrupt controller both for external IRQ pins and on-chip devices. On more recent ARM based SoCs with Cortex-A9 the main interrupt controller is the GIC, but IRQ trigger setup still need to happen in the INTC hardware block. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the INTC to the GIC. Tested on sh73a0 and r8a7779. The hardware varies quite a bit with SoC model, for instance register width and bitfield widths vary wildly. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 8 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-18 15:28:34 +01:00
config RENESAS_INTC_IRQPIN
bool
select IRQ_DOMAIN
irqchip: Renesas IRQC driver This patch adds a driver for external IRQ pins connected to the IRQC hardware block on recent SoCs from Renesas. The IRQC hardware block is used together with more recent ARM based SoCs using the GIC. As usual the GIC requires external IRQ trigger setup somewhere else which in this particular case happens to be IRQC. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the IRQC to the GIC. Tested on r8a73a4 but is designed to work with a wide range of SoCs. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 32 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-27 09:15:01 +01:00
config RENESAS_IRQC
bool
irqchip/renesas-irqc: Move over to nested generic chip Convert the IRQC driver to rely on GENERIC_IRQ_CHIP and set IRQ_GC_INIT_NESTED_LOCK to enable nested locking. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Cc: jason@lakedaemon.net Cc: geert+renesas@glider.be Cc: horms@verge.net.au Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20150928094237.32552.83434.sendpatchset@little-apple Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-28 11:42:37 +02:00
select GENERIC_IRQ_CHIP
irqchip: Renesas IRQC driver This patch adds a driver for external IRQ pins connected to the IRQC hardware block on recent SoCs from Renesas. The IRQC hardware block is used together with more recent ARM based SoCs using the GIC. As usual the GIC requires external IRQ trigger setup somewhere else which in this particular case happens to be IRQC. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the IRQC to the GIC. Tested on r8a73a4 but is designed to work with a wide range of SoCs. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 32 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-27 09:15:01 +01:00
select IRQ_DOMAIN
irqchip: st: Supply new driver for STi based devices This driver is used to enable System Configuration Register controlled External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs prior to use. Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lkml.kernel.org/r/1424272444-16230-3-git-send-email-lee.jones@linaro.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-02-18 16:13:58 +01:00
config ST_IRQCHIP
bool
select REGMAP
select MFD_SYSCON
help
Enables SysCfg Controlled IRQs on STi based platforms.
irqchip/tango: Add support for Sigma Designs SMP86xx/SMP87xx interrupt controller This adds support for the secondary interrupt controller used in Sigma Designs SMP86xx and SMP87xx chips. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453313237-18570-2-git-send-email-mans@mansr.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-01-20 19:07:17 +01:00
config TANGO_IRQ
bool
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
irqchip: Add TB10x interrupt controller driver The SOC interrupt controller driver for the Abilis Systems TB10x series of SOCs based on ARC700 CPUs. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: devicetree-discuss@lists.ozlabs.org Link: http://lkml.kernel.org/r/1372177797-9458-1-git-send-email-christian.ruppert@abilis.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-25 18:29:57 +02:00
config TB10X_IRQC
bool
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
irqchip/ts4800: Add TS-4800 interrupt controller This commit adds support for the TS-4800 interrupt controller. This controller is instantiated in a companion FPGA, and multiplex interrupts for other FPGA IPs. As this component is external to the SoC, the SoC might need to reserve pins, so this controller is implemented as a platform driver and doesn't use the IRQCHIP_DECLARE construct. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: kernel@savoirfairelinux.com Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-21 21:11:23 +01:00
config TS4800_IRQ
tristate "TS-4800 IRQ controller"
select IRQ_DOMAIN
irqchip: Fix dependencies for archs w/o HAS_IOMEM Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1453760661-1444-19-git-send-email-richard@nod.at Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-25 23:24:17 +01:00
depends on HAS_IOMEM
irqchip/ts4800: Add hardware dependency The Technologic Systems TS-4800 is an i.MX515 board, so its drivers are useless unless building a SOC_IMX51 kernel, except for build testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20160209111920.1ec318bd@endymion Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-09 11:19:20 +01:00
depends on SOC_IMX51 || COMPILE_TEST
irqchip/ts4800: Add TS-4800 interrupt controller This commit adds support for the TS-4800 interrupt controller. This controller is instantiated in a companion FPGA, and multiplex interrupts for other FPGA IPs. As this component is external to the SoC, the SoC might need to reserve pins, so this controller is implemented as a platform driver and doesn't use the IRQCHIP_DECLARE construct. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: kernel@savoirfairelinux.com Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-21 21:11:23 +01:00
help
Support for the TS-4800 FPGA IRQ controller
ARM: plat-versatile: move FPGA irq driver to drivers/irqchip This moves the Versatile FPGA interrupt controller driver, used in the Integrator/AP, Integrator/CP and some Versatile boards, out of arch/arm/plat-versatile and down to drivers/irqchip where we have consensus that such drivers belong. The header file is consequently moved to <linux/platform_data/irq-versatile-fpga.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-31 22:04:31 +01:00
config VERSATILE_FPGA_IRQ
bool
select IRQ_DOMAIN
config VERSATILE_FPGA_IRQ_NR
int
default 4
depends on VERSATILE_FPGA_IRQ
xtensa: add MX irqchip MX is an interrupt distributor used in some SMP-capable xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-12-01 09:04:57 +01:00
config XTENSA_MX
bool
select IRQ_DOMAIN
DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt lines from the subsystems are not needed at the same time, so they have to be muxed to the irq-controller appropriately. In such places a interrupt controllers are preceded by an CROSSBAR that provides flexibility in muxing the device requests to the controller inputs. This driver takes care a allocating a free irq and then configuring the crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should be called right before the irqchip_init, so that it is setup to handle the irqchip callbacks. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2013-12-03 11:27:23 +01:00
microblaze/irqchip: Move intc driver to irqchip The Xilinx AXI Interrupt Controller IP block is used by the MIPS based xilfpga platform and a few PowerPC based platforms. Move the interrupt controller code out of arch/microblaze so that it can be used by everyone Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-14 13:13:45 +01:00
config XILINX_INTC
bool
select IRQ_DOMAIN
DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt lines from the subsystems are not needed at the same time, so they have to be muxed to the irq-controller appropriately. In such places a interrupt controllers are preceded by an CROSSBAR that provides flexibility in muxing the device requests to the controller inputs. This driver takes care a allocating a free irq and then configuring the crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should be called right before the irqchip_init, so that it is setup to handle the irqchip callbacks. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2013-12-03 11:27:23 +01:00
config IRQ_CROSSBAR
bool
help
treewide: Fix typos in Kconfig This patch fix spelling typos found in Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-18 05:09:42 +02:00
Support for a CROSSBAR ip that precedes the main interrupt controller.
DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt lines from the subsystems are not needed at the same time, so they have to be muxed to the irq-controller appropriately. In such places a interrupt controllers are preceded by an CROSSBAR that provides flexibility in muxing the device requests to the controller inputs. This driver takes care a allocating a free irq and then configuring the crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should be called right before the irqchip_init, so that it is setup to handle the irqchip callbacks. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2013-12-03 11:27:23 +01:00
The primary irqchip invokes the crossbar's callback which inturn allocates
a free irq and configures the IP. Thus the peripheral interrupts are
routed to one of the free irqchip interrupt lines.
irqchip: keystone: Add irq controller ip driver On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx registers. This is one of the component used by the IPC mechanism used on Keystone SOCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lkml.kernel.org/r/1406126430-9978-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-23 16:40:30 +02:00
config KEYSTONE_IRQ
tristate "Keystone 2 IRQ controller IP"
depends on ARCH_KEYSTONE
help
Support for Texas Instruments Keystone 2 IRQ controller IP which
is part of the Keystone 2 IPC mechanism
MIPS: Move GIC to drivers/irqchip/ Move GIC irqchip support to drivers/irqchip/ and rename the Kconfig option from IRQ_GIC to MIPS_GIC to avoid confusion with the ARM GIC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-18 23:47:19 +02:00
config MIPS_GIC
bool
MIPS: Make smp CMP, CPS and MT use the new generic IPI functions This commit does several things to avoid breaking bisectability. 1- Remove IPI init code from irqchip/mips-gic 2- Implement the new irqchip->send_ipi() in irqchip/mips-gic 3- Select GENERIC_IRQ_IPI Kconfig symbol for MIPS_GIC 4- Change MIPS SMP to use the generic IPI implementation Only the SMP variants that use GIC were converted as it's the only irqchip that will have the support for generic IPI for now. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-18-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-08 14:20:28 +01:00
select GENERIC_IRQ_IPI
irqchip/mips-gic: Add a IPI hierarchy domain Add a new ipi domain on top of the normal domain. MIPS GIC now supports dynamic allocation of an IPI. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-13-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-08 14:20:23 +01:00
select IRQ_DOMAIN_HIERARCHY
MIPS: Move GIC to drivers/irqchip/ Move GIC irqchip support to drivers/irqchip/ and rename the Kconfig option from IRQ_GIC to MIPS_GIC to avoid confusion with the ARM GIC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-18 23:47:19 +02:00
select MIPS_CM
h8300: IRQ chip driver Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-05-09 19:30:47 +02:00
MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchip Move the driver for Ingenic SoC interrupt controllers into drivers/irqchip where it belongs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-24 17:11:31 +02:00
config INGENIC_IRQ
bool
depends on MACH_INGENIC
default y
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
2015-06-27 21:44:34 +02:00
h8300: IRQ chip driver Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-05-09 19:30:47 +02:00
config RENESAS_H8300H_INTC
bool
select IRQ_DOMAIN
config RENESAS_H8S_INTC
bool
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
2015-06-27 21:44:34 +02:00
select IRQ_DOMAIN
irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions: power management and wakeup source management. When the system is in WFI (wait for interrupt) mode, the GPC block will be the first block on the platform to be activated and signaled. In normal wait mode during cpu idle, the system can be woken up by any enabled interrupts. In standby or suspend mode, the system can only be wokem up by the pre-defined wakeup sources. Based-on-patch-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <shawn.guo@linaro.org> Cc: <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440443055-7291-1-git-send-email-shenwei.wang@freescale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-24 21:04:15 +02:00
config IMX_GPCV2
bool
select IRQ_DOMAIN
help
Enables the wakeup IRQs for IMX platforms with GPCv2 block
irqchip/mxs: Add Alphascale ASM9260 support Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt collectors. We already prepared the mxs driver to handle a different register layout. Add the actual ASM9260 support. Differences between these devices: - Different register offsets - Different count of interupt lines per register - ASM9260 does not provide reset bit - ASM9260 does not support FIQ. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-12 21:15:34 +02:00
config IRQ_MXS
def_bool y if MACH_ASM9260 || ARCH_MXS
select IRQ_DOMAIN
select STMP_DEVICE
irqchip/mvebu-odmi: Add new driver for platform MSI on Marvell 7K/8K This commits adds a new irqchip driver that handles the ODMI controller found on Marvell 7K/8K processors. The ODMI controller provide MSI interrupt functionality to on-board peripherals, much like the GIC-v2m. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1455888883-5127-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-19 14:34:43 +01:00
config MVEBU_ODMI
bool
irqchip: Add per-cpu interrupt partitioning library We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-11 10:57:53 +02:00
irqchip/mvebu-pic: New driver for Marvell Armada 7K/8K PIC The Marvell Armada 7K/8K integrates a secondary interrupt controller very originally named "PIC". It is connected to the main GIC via a PPI. Amongst other things, this PIC is used for the ARM PMU. This commit adds a simple irqchip driver for this interrupt controller. Since this interrupt controller is not needed early at boot time, we make the driver a proper platform driver rather than use the IRQCHIP_DECLARE() mechanism. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1470408921-447-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-05 16:55:19 +02:00
config MVEBU_PIC
bool
irqchip: Add Layerscape SCFG MSI controller support Some kind of Freescale Layerscape SoC provides a MSI implementation which uses two SCFG registers MSIIR and MSIR to support 32 MSI interrupts for each PCIe controller. The patch is to support it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-23 12:08:20 +01:00
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
irqchip: Add per-cpu interrupt partitioning library We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-11 10:57:53 +02:00
config PARTITION_PERCPU
bool
ARC updates for 4.7-rc1 - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXPVjYAAoJEGnX8d3iisJeMJQP/2fBHUqCVjxYMaU0XSy/rFiu XItBxYfDHw+pXILgwZ1XPy0CNUxNhGmIG+0Scy+Uw9bDa64Eulked6QVsLlosOky 2rbmDAZf2/fnwFhASg9eY2Xm5B2jFvStzmTkOgAkGko5cCwF7WWZJhLiziSICvK/ l7I5yr0SSpn9xGbazeIxyqw16e4QuY+uCKXF12AoGOi+efpe1L7vrbu9WKELWQfJ NreZjxC16je944POnE4hw4F11Tg+uvhgQAAlmFCUswIZwtnTjttrmMyflop86H3S cItT1UV/ps24lD2ZZVIlI6Gdc/iKB0FSq7XTpTOAVI/ku5x2tWGmRb8aM5pxmCkX r44dXW89P9JFhthWKS79FwXgwxIMMN3CniO+g4YnrpI23iu6O+kXGoQejwsE1NZ0 99+gXcUvEL1E5GZ7JfAdIvU741Y+y06fgXBs8Z+BGKzUNN5bI3PtuPeVNQwC38J7 lY8UegRW/elmiNiOilz+QZ5sGX/QVnN68UQNkBYHZRom/3vpzcMMZpTu5xgw5XqQ CnCd0lD0tWICyiq6BXeNACBgQ6RX+KY9EECpVt05CTw5IxZQyGMAJwNqIuLw3Id3 j42IiJ3PHH1yS+TeWOYf2mEvXj8vyiQK6fssy6xZ0bPqRKaEqwAKeDEW2St9N9B4 0PhS1VwvL5RXsZx79/6e =pnAx -----END PGP SIGNATURE----- Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...
2016-05-19 18:46:18 +02:00
irqchip: add nps Internal and external irqchips Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
2015-10-28 23:26:22 +01:00
config EZNPS_GIC
bool "NPS400 Global Interrupt Manager (GIM)"
irqchip: nps: add 64BIT dependency The newly added nps irqchip driver causes build warnings on ARM64. include/soc/nps/common.h: In function 'nps_host_reg_non_cl': include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] As the driver is only used on ARC, we don't need to see it without COMPILE_TEST elsewhere, and we can avoid the warnings by only building on 32-bit architectures even with CONFIG_COMPILE_TEST. Acked-by: Marc Zyngier <narc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-12 23:03:35 +02:00
depends on ARC || (COMPILE_TEST && !64BIT)
irqchip: add nps Internal and external irqchips Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
2015-10-28 23:26:22 +01:00
select IRQ_DOMAIN
help
Support the EZchip NPS400 global interrupt controller
drivers/irqchip: Add STM32 external interrupts support The STM32 external interrupt controller consists of edge detectors that generate interrupts requests or wake-up events. Each line can be independently configured as interrupt or wake-up source, and triggers either on rising, falling or both edges. Each line can also be masked independently. Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-20 18:00:57 +02:00
config STM32_EXTI
bool
select IRQ_DOMAIN
irqchip/qcom: Add IRQ combiner driver Driver for interrupt combiners in the Top-level Control and Status Registers (TCSR) hardware block in Qualcomm Technologies chips. An interrupt combiner in this block combines a set of interrupts by OR'ing the individual interrupt signals into a summary interrupt signal routed to a parent interrupt controller, and provides read- only, 32-bit registers to query the status of individual interrupts. The status bit for IRQ n is bit (n % 32) within register (n / 32) of the given combiner. Thus, each combiner can be described as a set of register offsets and the number of IRQs managed. Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 00:23:59 +01:00
config QCOM_IRQ_COMBINER
bool "QCOM IRQ combiner support"
depends on ARCH_QCOM && ACPI
select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Say yes here to add support for the IRQ combiner devices embedded
in Qualcomm Technologies chips.