linux/net/batman-adv/soft-interface.c

561 lines
15 KiB
C
Raw Normal View History

/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA
*/
#include "main.h"
#include "soft-interface.h"
#include "hard-interface.h"
#include "routing.h"
#include "send.h"
#include "debugfs.h"
#include "translation-table.h"
#include "hash.h"
#include "gateway_common.h"
#include "gateway_client.h"
#include "sysfs.h"
#include "originator.h"
#include <linux/slab.h>
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include "unicast.h"
#include "bridge_loop_avoidance.h"
static int batadv_get_settings(struct net_device *dev, struct ethtool_cmd *cmd);
static void batadv_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info);
static u32 batadv_get_msglevel(struct net_device *dev);
static void batadv_set_msglevel(struct net_device *dev, u32 value);
static u32 batadv_get_link(struct net_device *dev);
static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data);
static void batadv_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, u64 *data);
static int batadv_get_sset_count(struct net_device *dev, int stringset);
static const struct ethtool_ops batadv_ethtool_ops = {
.get_settings = batadv_get_settings,
.get_drvinfo = batadv_get_drvinfo,
.get_msglevel = batadv_get_msglevel,
.set_msglevel = batadv_set_msglevel,
.get_link = batadv_get_link,
.get_strings = batadv_get_strings,
.get_ethtool_stats = batadv_get_ethtool_stats,
.get_sset_count = batadv_get_sset_count,
};
int batadv_skb_head_push(struct sk_buff *skb, unsigned int len)
{
int result;
/* TODO: We must check if we can release all references to non-payload
* data using skb_header_release in our skbs to allow skb_cow_header to
* work optimally. This means that those skbs are not allowed to read
* or write any data which is before the current position of skb->data
* after that call and thus allow other skbs with the same data buffer
* to write freely in that area.
*/
result = skb_cow_head(skb, len);
if (result < 0)
return result;
skb_push(skb, len);
return 0;
}
static int batadv_interface_open(struct net_device *dev)
{
netif_start_queue(dev);
return 0;
}
static int batadv_interface_release(struct net_device *dev)
{
netif_stop_queue(dev);
return 0;
}
static struct net_device_stats *batadv_interface_stats(struct net_device *dev)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
return &bat_priv->stats;
}
static int batadv_interface_set_mac_addr(struct net_device *dev, void *p)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
/* only modify transtable if it has been initialized before */
if (atomic_read(&bat_priv->mesh_state) == BATADV_MESH_ACTIVE) {
batadv_tt_local_remove(bat_priv, dev->dev_addr,
"mac address changed", false);
batadv_tt_local_add(dev, addr->sa_data, BATADV_NULL_IFINDEX);
}
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
dev->addr_assign_type &= ~NET_ADDR_RANDOM;
return 0;
}
static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu)
{
/* check ranges */
if ((new_mtu < 68) || (new_mtu > batadv_hardif_min_mtu(dev)))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static int batadv_interface_tx(struct sk_buff *skb,
struct net_device *soft_iface)
{
struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
struct batadv_hard_iface *primary_if = NULL;
struct batadv_bcast_packet *bcast_packet;
struct vlan_ethhdr *vhdr;
__be16 ethertype = __constant_htons(BATADV_ETH_P_BATMAN);
static const uint8_t stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00, 0x00,
0x00};
unsigned int header_len = 0;
int data_len = skb->len, ret;
short vid __maybe_unused = -1;
bool do_bcast = false;
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
goto dropped;
soft_iface->trans_start = jiffies;
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
vhdr = (struct vlan_ethhdr *)skb->data;
vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
/* fall through */
case BATADV_ETH_P_BATMAN:
goto dropped;
}
if (batadv_bla_tx(bat_priv, skb, vid))
goto dropped;
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 14:27:44 +02:00
/* Register the client MAC in the transtable */
batadv_tt_local_add(soft_iface, ethhdr->h_source, skb->skb_iif);
/* don't accept stp packets. STP does not help in meshes.
* better use the bridge loop avoidance ...
*/
if (batadv_compare_eth(ethhdr->h_dest, stp_addr))
goto dropped;
if (is_multicast_ether_addr(ethhdr->h_dest)) {
do_bcast = true;
switch (atomic_read(&bat_priv->gw_mode)) {
case BATADV_GW_MODE_SERVER:
/* gateway servers should not send dhcp
* requests into the mesh
*/
ret = batadv_gw_is_dhcp_target(skb, &header_len);
if (ret)
goto dropped;
break;
case BATADV_GW_MODE_CLIENT:
/* gateway clients should send dhcp requests
* via unicast to their gateway
*/
ret = batadv_gw_is_dhcp_target(skb, &header_len);
if (ret)
do_bcast = false;
break;
case BATADV_GW_MODE_OFF:
default:
break;
}
}
/* ethernet packet should be broadcasted */
if (do_bcast) {
primary_if = batadv_primary_if_get_selected(bat_priv);
if (!primary_if)
goto dropped;
if (batadv_skb_head_push(skb, sizeof(*bcast_packet)) < 0)
goto dropped;
bcast_packet = (struct batadv_bcast_packet *)skb->data;
bcast_packet->header.version = BATADV_COMPAT_VERSION;
bcast_packet->header.ttl = BATADV_TTL;
/* batman packet type: broadcast */
bcast_packet->header.packet_type = BATADV_BCAST;
bcast_packet->reserved = 0;
/* hw address of first interface is the orig mac because only
* this mac is known throughout the mesh
*/
memcpy(bcast_packet->orig,
primary_if->net_dev->dev_addr, ETH_ALEN);
/* set broadcast sequence number */
bcast_packet->seqno =
htonl(atomic_inc_return(&bat_priv->bcast_seqno));
batadv_add_bcast_packet_to_list(bat_priv, skb, 1);
/* a copy is stored in the bcast list, therefore removing
* the original skb.
*/
kfree_skb(skb);
/* unicast packet */
} else {
if (atomic_read(&bat_priv->gw_mode) != BATADV_GW_MODE_OFF) {
ret = batadv_gw_out_of_range(bat_priv, skb, ethhdr);
if (ret)
goto dropped;
}
ret = batadv_unicast_send_skb(skb, bat_priv);
if (ret != 0)
goto dropped_freed;
}
bat_priv->stats.tx_packets++;
bat_priv->stats.tx_bytes += data_len;
goto end;
dropped:
kfree_skb(skb);
dropped_freed:
bat_priv->stats.tx_dropped++;
end:
if (primary_if)
batadv_hardif_free_ref(primary_if);
return NETDEV_TX_OK;
}
void batadv_interface_rx(struct net_device *soft_iface,
struct sk_buff *skb, struct batadv_hard_iface *recv_if,
int hdr_size)
{
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
struct ethhdr *ethhdr;
struct vlan_ethhdr *vhdr;
struct batadv_header *batadv_header = (struct batadv_header *)skb->data;
short vid __maybe_unused = -1;
__be16 ethertype = __constant_htons(BATADV_ETH_P_BATMAN);
bool is_bcast;
is_bcast = (batadv_header->packet_type == BATADV_BCAST);
/* check if enough space is available for pulling, and pull */
if (!pskb_may_pull(skb, hdr_size))
goto dropped;
skb_pull_rcsum(skb, hdr_size);
skb_reset_mac_header(skb);
ethhdr = (struct ethhdr *)skb_mac_header(skb);
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
vhdr = (struct vlan_ethhdr *)skb->data;
vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
/* fall through */
case BATADV_ETH_P_BATMAN:
goto dropped;
}
/* skb->dev & skb->pkt_type are set here */
if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be necessary anymore as we use skb_pull_rcsum()
* TODO: please verify this and remove this TODO
* -- Dec 21st 2009, Simon Wunderlich
*/
/* skb->ip_summed = CHECKSUM_UNNECESSARY; */
bat_priv->stats.rx_packets++;
bat_priv->stats.rx_bytes += skb->len + ETH_HLEN;
soft_iface->last_rx = jiffies;
if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
goto dropped;
/* Let the bridge loop avoidance check the packet. If will
* not handle it, we can safely push it up.
*/
if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
goto out;
netif_rx(skb);
goto out;
dropped:
kfree_skb(skb);
out:
return;
}
static const struct net_device_ops batadv_netdev_ops = {
.ndo_open = batadv_interface_open,
.ndo_stop = batadv_interface_release,
.ndo_get_stats = batadv_interface_stats,
.ndo_set_mac_address = batadv_interface_set_mac_addr,
.ndo_change_mtu = batadv_interface_change_mtu,
.ndo_start_xmit = batadv_interface_tx,
.ndo_validate_addr = eth_validate_addr
};
static void batadv_interface_setup(struct net_device *dev)
{
struct batadv_priv *priv = netdev_priv(dev);
ether_setup(dev);
dev->netdev_ops = &batadv_netdev_ops;
dev->destructor = free_netdev;
dev->tx_queue_len = 0;
/* can't call min_mtu, because the needed variables
* have not been initialized yet
*/
dev->mtu = ETH_DATA_LEN;
/* reserve more space in the skbuff for our header */
dev->hard_header_len = BATADV_HEADER_LEN;
/* generate random address */
eth_hw_addr_random(dev);
SET_ETHTOOL_OPS(dev, &batadv_ethtool_ops);
memset(priv, 0, sizeof(*priv));
}
struct net_device *batadv_softif_create(const char *name)
{
struct net_device *soft_iface;
struct batadv_priv *bat_priv;
int ret;
size_t cnt_len = sizeof(uint64_t) * BATADV_CNT_NUM;
soft_iface = alloc_netdev(sizeof(*bat_priv), name,
batadv_interface_setup);
if (!soft_iface)
goto out;
ret = register_netdevice(soft_iface);
if (ret < 0) {
pr_err("Unable to register the batman interface '%s': %i\n",
name, ret);
goto free_soft_iface;
}
bat_priv = netdev_priv(soft_iface);
atomic_set(&bat_priv->aggregated_ogms, 1);
atomic_set(&bat_priv->bonding, 0);
atomic_set(&bat_priv->bridge_loop_avoidance, 0);
atomic_set(&bat_priv->ap_isolation, 0);
atomic_set(&bat_priv->vis_mode, BATADV_VIS_TYPE_CLIENT_UPDATE);
atomic_set(&bat_priv->gw_mode, BATADV_GW_MODE_OFF);
atomic_set(&bat_priv->gw_sel_class, 20);
atomic_set(&bat_priv->gw_bandwidth, 41);
atomic_set(&bat_priv->orig_interval, 1000);
atomic_set(&bat_priv->hop_penalty, 30);
atomic_set(&bat_priv->log_level, 0);
atomic_set(&bat_priv->fragmentation, 1);
atomic_set(&bat_priv->bcast_queue_left, BATADV_BCAST_QUEUE_LEN);
atomic_set(&bat_priv->batman_queue_left, BATADV_BATMAN_QUEUE_LEN);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
atomic_set(&bat_priv->bcast_seqno, 1);
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 14:27:44 +02:00
atomic_set(&bat_priv->ttvn, 0);
atomic_set(&bat_priv->tt_local_changes, 0);
atomic_set(&bat_priv->tt_ogm_append_cnt, 0);
atomic_set(&bat_priv->bla_num_requests, 0);
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 14:27:44 +02:00
bat_priv->tt_buff = NULL;
bat_priv->tt_buff_len = 0;
bat_priv->tt_poss_change = false;
bat_priv->primary_if = NULL;
bat_priv->num_ifaces = 0;
bat_priv->bat_counters = __alloc_percpu(cnt_len, __alignof__(uint64_t));
if (!bat_priv->bat_counters)
goto unreg_soft_iface;
ret = batadv_algo_select(bat_priv, batadv_routing_algo);
if (ret < 0)
goto free_bat_counters;
ret = batadv_sysfs_add_meshif(soft_iface);
if (ret < 0)
goto free_bat_counters;
ret = batadv_debugfs_add_meshif(soft_iface);
if (ret < 0)
goto unreg_sysfs;
ret = batadv_mesh_init(soft_iface);
if (ret < 0)
goto unreg_debugfs;
return soft_iface;
unreg_debugfs:
batadv_debugfs_del_meshif(soft_iface);
unreg_sysfs:
batadv_sysfs_del_meshif(soft_iface);
free_bat_counters:
free_percpu(bat_priv->bat_counters);
unreg_soft_iface:
unregister_netdevice(soft_iface);
return NULL;
free_soft_iface:
free_netdev(soft_iface);
out:
return NULL;
}
void batadv_softif_destroy(struct net_device *soft_iface)
{
batadv_debugfs_del_meshif(soft_iface);
batadv_sysfs_del_meshif(soft_iface);
batadv_mesh_free(soft_iface);
unregister_netdevice(soft_iface);
}
int batadv_softif_is_valid(const struct net_device *net_dev)
{
if (net_dev->netdev_ops->ndo_start_xmit == batadv_interface_tx)
return 1;
return 0;
}
/* ethtool */
static int batadv_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
cmd->supported = 0;
cmd->advertising = 0;
ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_TP;
cmd->phy_address = 0;
cmd->transceiver = XCVR_INTERNAL;
cmd->autoneg = AUTONEG_DISABLE;
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
return 0;
}
static void batadv_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strcpy(info->driver, "B.A.T.M.A.N. advanced");
strcpy(info->version, BATADV_SOURCE_VERSION);
strcpy(info->fw_version, "N/A");
strcpy(info->bus_info, "batman");
}
static u32 batadv_get_msglevel(struct net_device *dev)
{
return -EOPNOTSUPP;
}
static void batadv_set_msglevel(struct net_device *dev, u32 value)
{
}
static u32 batadv_get_link(struct net_device *dev)
{
return 1;
}
/* Inspired by drivers/net/ethernet/dlink/sundance.c:1702
* Declare each description string in struct.name[] to get fixed sized buffer
* and compile time checking for strings longer than ETH_GSTRING_LEN.
*/
static const struct {
const char name[ETH_GSTRING_LEN];
} batadv_counters_strings[] = {
{ "forward" },
{ "forward_bytes" },
{ "mgmt_tx" },
{ "mgmt_tx_bytes" },
{ "mgmt_rx" },
{ "mgmt_rx_bytes" },
{ "tt_request_tx" },
{ "tt_request_rx" },
{ "tt_response_tx" },
{ "tt_response_rx" },
{ "tt_roam_adv_tx" },
{ "tt_roam_adv_rx" },
};
static void batadv_get_strings(struct net_device *dev, uint32_t stringset,
uint8_t *data)
{
if (stringset == ETH_SS_STATS)
memcpy(data, batadv_counters_strings,
sizeof(batadv_counters_strings));
}
static void batadv_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats,
uint64_t *data)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
int i;
for (i = 0; i < BATADV_CNT_NUM; i++)
data[i] = batadv_sum_counter(bat_priv, i);
}
static int batadv_get_sset_count(struct net_device *dev, int stringset)
{
if (stringset == ETH_SS_STATS)
return BATADV_CNT_NUM;
return -EOPNOTSUPP;
}