linux/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

209 lines
3.9 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "tegra30-colibri.dtsi"
/ {
model = "Toradex Colibri T30 on Colibri Evaluation Board";
compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
rtc1 = "/i2c@7000d000/tps65911@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartd;
};
host1x@50000000 {
dc@54200000 {
rgb {
status = "okay";
nvidia,panel = <&panel>;
};
};
hdmi@54280000 {
status = "okay";
};
};
serial@70006000 {
status = "okay";
};
serial@70006040 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
serial@70006300 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
*/
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
/* M41T0M6 real time clock on carrier board */
rtc@68 {
compatible = "stm,m41t00";
reg = <0x68>;
};
};
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
hdmiddc: i2c@7000c700 {
status = "okay";
};
/* SPI1: Colibri SSP */
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
can0: can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
spi-max-frequency = <10000000>;
};
spidev0: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <25000000>;
};
};
sdhci@78000200 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
no-1-8-v;
};
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@7d000000 {
status = "okay";
};
usb-phy@7d000000 {
status = "okay";
dr_mode = "otg";
vbus-supply = <&usbc_vbus_reg>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
status = "okay";
vbus-supply = <&usbh_vbus_reg>;
};
backlight: backlight {
compatible = "pwm-backlight";
/* PWM<A> */
pwms = <&pwm 0 5000000>;
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
};
clocks {
clk16m: clk@1 {
compatible = "fixed-clock";
reg=<1>;
#clock-cells = <0>;
clock-frequency = <16000000>;
clock-output-names = "clk16m";
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
debounce-interval = <10>;
gpio-key,wakeup;
};
};
panel: panel {
/*
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
backlight = <&backlight>;
};
pwmleds {
compatible = "pwm-leds";
pwmb {
label = "PWM<B>";
pwms = <&pwm 1 19600>;
max-brightness = <255>;
};
pwmc {
label = "PWM<C>";
pwms = <&pwm 2 19600>;
max-brightness = <255>;
};
pwmd {
label = "PWM<D>";
pwms = <&pwm 3 19600>;
max-brightness = <255>;
};
};
regulators {
sys_5v0_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
usbc_vbus_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usbc_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&sys_5v0_reg>;
};
/* USBH_PEN */
usbh_vbus_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usbh_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
vin-supply = <&sys_5v0_reg>;
};
};
};