License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2009-01-09 00:14:17 +01:00
|
|
|
/*
|
|
|
|
|
* decompress.c
|
|
|
|
|
*
|
|
|
|
|
* Detect the decompression method based on magic number
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/decompress/generic.h>
|
|
|
|
|
|
|
|
|
|
#include <linux/decompress/bunzip2.h>
|
|
|
|
|
#include <linux/decompress/unlzma.h>
|
decompressors: add boot-time XZ support
This implements the API defined in <linux/decompress/generic.h> which is
used for kernel, initramfs, and initrd decompression. This patch together
with the first patch is enough for XZ-compressed initramfs and initrd;
XZ-compressed kernel will need arch-specific changes.
The buffering requirements described in decompress_unxz.c are stricter
than with gzip, so the relevant changes should be done to the
arch-specific code when adding support for XZ-compressed kernel.
Similarly, the heap size in arch-specific pre-boot code may need to be
increased (30 KiB is enough).
The XZ decompressor needs memmove(), memeq() (memcmp() == 0), and
memzero() (memset(ptr, 0, size)), which aren't available in all
arch-specific pre-boot environments. I'm including simple versions in
decompress_unxz.c, but a cleaner solution would naturally be nicer.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 02:01:23 +01:00
|
|
|
#include <linux/decompress/unxz.h>
|
2009-01-09 00:14:17 +01:00
|
|
|
#include <linux/decompress/inflate.h>
|
2010-01-08 23:42:46 +01:00
|
|
|
#include <linux/decompress/unlzo.h>
|
2013-07-09 01:01:46 +02:00
|
|
|
#include <linux/decompress/unlz4.h>
|
2009-01-09 00:14:17 +01:00
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <linux/string.h>
|
2012-10-05 02:16:58 +02:00
|
|
|
#include <linux/init.h>
|
2014-04-08 00:39:16 +02:00
|
|
|
#include <linux/printk.h>
|
2009-01-09 00:14:17 +01:00
|
|
|
|
2009-01-12 23:24:04 +01:00
|
|
|
#ifndef CONFIG_DECOMPRESS_GZIP
|
|
|
|
|
# define gunzip NULL
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef CONFIG_DECOMPRESS_BZIP2
|
|
|
|
|
# define bunzip2 NULL
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef CONFIG_DECOMPRESS_LZMA
|
|
|
|
|
# define unlzma NULL
|
|
|
|
|
#endif
|
decompressors: add boot-time XZ support
This implements the API defined in <linux/decompress/generic.h> which is
used for kernel, initramfs, and initrd decompression. This patch together
with the first patch is enough for XZ-compressed initramfs and initrd;
XZ-compressed kernel will need arch-specific changes.
The buffering requirements described in decompress_unxz.c are stricter
than with gzip, so the relevant changes should be done to the
arch-specific code when adding support for XZ-compressed kernel.
Similarly, the heap size in arch-specific pre-boot code may need to be
increased (30 KiB is enough).
The XZ decompressor needs memmove(), memeq() (memcmp() == 0), and
memzero() (memset(ptr, 0, size)), which aren't available in all
arch-specific pre-boot environments. I'm including simple versions in
decompress_unxz.c, but a cleaner solution would naturally be nicer.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 02:01:23 +01:00
|
|
|
#ifndef CONFIG_DECOMPRESS_XZ
|
|
|
|
|
# define unxz NULL
|
|
|
|
|
#endif
|
2010-01-08 23:42:46 +01:00
|
|
|
#ifndef CONFIG_DECOMPRESS_LZO
|
|
|
|
|
# define unlzo NULL
|
|
|
|
|
#endif
|
2013-07-09 01:01:46 +02:00
|
|
|
#ifndef CONFIG_DECOMPRESS_LZ4
|
|
|
|
|
# define unlz4 NULL
|
|
|
|
|
#endif
|
2009-01-12 23:24:04 +01:00
|
|
|
|
2012-10-05 02:16:58 +02:00
|
|
|
struct compress_format {
|
2009-01-09 00:14:17 +01:00
|
|
|
unsigned char magic[2];
|
|
|
|
|
const char *name;
|
|
|
|
|
decompress_fn decompressor;
|
2012-10-05 02:16:58 +02:00
|
|
|
};
|
|
|
|
|
|
2013-05-01 00:28:50 +02:00
|
|
|
static const struct compress_format compressed_formats[] __initconst = {
|
2014-12-13 01:58:08 +01:00
|
|
|
{ {0x1f, 0x8b}, "gzip", gunzip },
|
|
|
|
|
{ {0x1f, 0x9e}, "gzip", gunzip },
|
2009-01-09 00:14:17 +01:00
|
|
|
{ {0x42, 0x5a}, "bzip2", bunzip2 },
|
|
|
|
|
{ {0x5d, 0x00}, "lzma", unlzma },
|
decompressors: add boot-time XZ support
This implements the API defined in <linux/decompress/generic.h> which is
used for kernel, initramfs, and initrd decompression. This patch together
with the first patch is enough for XZ-compressed initramfs and initrd;
XZ-compressed kernel will need arch-specific changes.
The buffering requirements described in decompress_unxz.c are stricter
than with gzip, so the relevant changes should be done to the
arch-specific code when adding support for XZ-compressed kernel.
Similarly, the heap size in arch-specific pre-boot code may need to be
increased (30 KiB is enough).
The XZ decompressor needs memmove(), memeq() (memcmp() == 0), and
memzero() (memset(ptr, 0, size)), which aren't available in all
arch-specific pre-boot environments. I'm including simple versions in
decompress_unxz.c, but a cleaner solution would naturally be nicer.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 02:01:23 +01:00
|
|
|
{ {0xfd, 0x37}, "xz", unxz },
|
2010-01-08 23:42:46 +01:00
|
|
|
{ {0x89, 0x4c}, "lzo", unlzo },
|
2013-07-09 01:01:46 +02:00
|
|
|
{ {0x02, 0x21}, "lz4", unlz4 },
|
2009-01-09 00:14:17 +01:00
|
|
|
{ {0, 0}, NULL, NULL }
|
|
|
|
|
};
|
|
|
|
|
|
initramfs: support initramfs that is bigger than 2GiB
Now with 64bit bzImage and kexec tools, we support ramdisk that size is
bigger than 2g, as we could put it above 4G.
Found compressed initramfs image could not be decompressed properly. It
turns out that image length is int during decompress detection, and it
will become < 0 when length is more than 2G. Furthermore, during
decompressing len as int is used for inbuf count, that has problem too.
Change len to long, that should be ok as on 32 bit platform long is
32bits.
Tested with following compressed initramfs image as root with kexec.
gzip, bzip2, xz, lzma, lzop, lz4.
run time for populate_rootfs():
size name Nehalem-EX Westmere-EX Ivybridge-EX
9034400256 root_img : 26s 24s 30s
3561095057 root_img.lz4 : 28s 27s 27s
3459554629 root_img.lzo : 29s 29s 28s
3219399480 root_img.gz : 64s 62s 49s
2251594592 root_img.xz : 262s 260s 183s
2226366598 root_img.lzma: 386s 376s 277s
2901482513 root_img.bz2 : 635s 599s
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rashika Kheria <rashika.kheria@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: P J P <ppandit@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: "Daniel M. Weeks" <dan@danweeks.net>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 23:23:14 +02:00
|
|
|
decompress_fn __init decompress_method(const unsigned char *inbuf, long len,
|
2009-01-09 00:14:17 +01:00
|
|
|
const char **name)
|
|
|
|
|
{
|
|
|
|
|
const struct compress_format *cf;
|
|
|
|
|
|
2015-07-18 01:24:26 +02:00
|
|
|
if (len < 2) {
|
|
|
|
|
if (name)
|
|
|
|
|
*name = NULL;
|
2009-01-09 00:14:17 +01:00
|
|
|
return NULL; /* Need at least this much... */
|
2015-07-18 01:24:26 +02:00
|
|
|
}
|
2009-01-09 00:14:17 +01:00
|
|
|
|
2014-04-08 00:39:16 +02:00
|
|
|
pr_debug("Compressed data magic: %#.2x %#.2x\n", inbuf[0], inbuf[1]);
|
|
|
|
|
|
2009-02-19 22:36:55 +01:00
|
|
|
for (cf = compressed_formats; cf->name; cf++) {
|
2009-01-09 00:14:17 +01:00
|
|
|
if (!memcmp(inbuf, cf->magic, 2))
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
if (name)
|
|
|
|
|
*name = cf->name;
|
|
|
|
|
return cf->decompressor;
|
|
|
|
|
}
|