2006-08-30 00:12:40 +02:00
|
|
|
/*
|
|
|
|
* pata_mpiix.c - Intel MPIIX PATA for new ATA layer
|
|
|
|
* (C) 2005-2006 Red Hat Inc
|
|
|
|
* Alan Cox <alan@redhat.com>
|
|
|
|
*
|
|
|
|
* The MPIIX is different enough to the PIIX4 and friends that we give it
|
|
|
|
* a separate driver. The old ide/pci code handles this by just not tuning
|
|
|
|
* MPIIX at all.
|
|
|
|
*
|
|
|
|
* The MPIIX also differs in another important way from the majority of PIIX
|
|
|
|
* devices. The chip is a bridge (pardon the pun) between the old world of
|
|
|
|
* ISA IDE and PCI IDE. Although the ATA timings are PCI configured the actual
|
|
|
|
* IDE controller is not decoded in PCI space and the chip does not claim to
|
|
|
|
* be IDE class PCI. This requires slightly non-standard probe logic compared
|
|
|
|
* with PCI IDE and also that we do not disable the device when our driver is
|
|
|
|
* unloaded (as it has many other functions).
|
|
|
|
*
|
|
|
|
* The driver conciously keeps this logic internally to avoid pushing quirky
|
|
|
|
* PATA history into the clean libata layer.
|
|
|
|
*
|
2006-09-26 18:53:38 +02:00
|
|
|
* Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
|
2006-08-30 00:12:40 +02:00
|
|
|
* hard disk present this driver will not detect it. This is not a bug. In this
|
|
|
|
* configuration the secondary port of the MPIIX is disabled and the addresses
|
|
|
|
* are decoded by the PCMCIA bridge and therefore are for a generic IDE driver
|
|
|
|
* to operate.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
|
|
|
|
#define DRV_NAME "pata_mpiix"
|
2006-11-22 17:57:36 +01:00
|
|
|
#define DRV_VERSION "0.7.3"
|
2006-08-30 00:12:40 +02:00
|
|
|
|
|
|
|
enum {
|
|
|
|
IDETIM = 0x6C, /* IDE control register */
|
|
|
|
IORDY = (1 << 1),
|
|
|
|
PPE = (1 << 2),
|
|
|
|
FTIM = (1 << 0),
|
|
|
|
ENABLED = (1 << 15),
|
|
|
|
SECONDARY = (1 << 14)
|
|
|
|
};
|
|
|
|
|
|
|
|
static int mpiix_pre_reset(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
static const struct pci_bits mpiix_enable_bits[] = {
|
|
|
|
{ 0x6D, 1, 0x80, 0x80 },
|
|
|
|
{ 0x6F, 1, 0x80, 0x80 }
|
|
|
|
};
|
|
|
|
|
2006-09-26 18:53:38 +02:00
|
|
|
if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
|
|
|
|
return -ENOENT;
|
2006-08-30 00:12:40 +02:00
|
|
|
ap->cbl = ATA_CBL_PATA40;
|
|
|
|
return ata_std_prereset(ap);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* mpiix_error_handler - probe reset
|
|
|
|
* @ap: ATA port
|
|
|
|
*
|
|
|
|
* Perform the ATA probe and bus reset sequence plus specific handling
|
|
|
|
* for this hardware. The MPIIX has the enable bits in a different place
|
|
|
|
* to PIIX4 and friends. As a pure PIO device it has no cable detect
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void mpiix_error_handler(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* mpiix_set_piomode - set initial PIO mode data
|
|
|
|
* @ap: ATA interface
|
|
|
|
* @adev: ATA device
|
|
|
|
*
|
|
|
|
* Called to do the PIO mode setup. The MPIIX allows us to program the
|
|
|
|
* IORDY sample point (2-5 clocks), recovery 1-4 clocks and whether
|
|
|
|
* prefetching or iordy are used.
|
|
|
|
*
|
|
|
|
* This would get very ugly because we can only program timing for one
|
|
|
|
* device at a time, the other gets PIO0. Fortunately libata calls
|
|
|
|
* our qc_issue_prot command before a command is issued so we can
|
|
|
|
* flip the timings back and forth to reduce the pain.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
|
|
{
|
|
|
|
int control = 0;
|
|
|
|
int pio = adev->pio_mode - XFER_PIO_0;
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
u16 idetim;
|
|
|
|
static const /* ISP RTC */
|
|
|
|
u8 timings[][2] = { { 0, 0 },
|
|
|
|
{ 0, 0 },
|
|
|
|
{ 1, 0 },
|
|
|
|
{ 2, 1 },
|
|
|
|
{ 2, 3 }, };
|
|
|
|
|
|
|
|
pci_read_config_word(pdev, IDETIM, &idetim);
|
|
|
|
/* Mask the IORDY/TIME/PPE0 bank for this device */
|
|
|
|
if (adev->class == ATA_DEV_ATA)
|
|
|
|
control |= PPE; /* PPE enable for disk */
|
|
|
|
if (ata_pio_need_iordy(adev))
|
|
|
|
control |= IORDY; /* IORDY */
|
|
|
|
if (pio > 0)
|
|
|
|
control |= FTIM; /* This drive is on the fast timing bank */
|
|
|
|
|
|
|
|
/* Mask out timing and clear both TIME bank selects */
|
|
|
|
idetim &= 0xCCEE;
|
|
|
|
idetim &= ~(0x07 << (2 * adev->devno));
|
|
|
|
idetim |= (control << (2 * adev->devno));
|
|
|
|
|
|
|
|
idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
|
|
pci_write_config_word(pdev, IDETIM, idetim);
|
|
|
|
|
|
|
|
/* We use ap->private_data as a pointer to the device currently
|
|
|
|
loaded for timing */
|
|
|
|
ap->private_data = adev;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* mpiix_qc_issue_prot - command issue
|
|
|
|
* @qc: command pending
|
|
|
|
*
|
|
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
|
|
* this interface so that we can load the correct ATA timings if
|
|
|
|
* neccessary. Our logic also clears TIME0/TIME1 for the other device so
|
|
|
|
* that, even if we get this wrong, cycles to the other device will
|
|
|
|
* be made PIO0.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
|
|
|
|
/* If modes have been configured and the channel data is not loaded
|
|
|
|
then load it. We have to check if pio_mode is set as the core code
|
|
|
|
does not set adev->pio_mode to XFER_PIO_0 while probing as would be
|
|
|
|
logical */
|
|
|
|
|
|
|
|
if (adev->pio_mode && adev != ap->private_data)
|
|
|
|
mpiix_set_piomode(ap, adev);
|
|
|
|
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct scsi_host_template mpiix_sht = {
|
|
|
|
.module = THIS_MODULE,
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.ioctl = ata_scsi_ioctl,
|
|
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
|
|
.emulated = ATA_SHT_EMULATED,
|
|
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
|
|
.proc_name = DRV_NAME,
|
|
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
|
|
.slave_configure = ata_scsi_slave_config,
|
2006-11-29 03:26:47 +01:00
|
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
2006-08-30 00:12:40 +02:00
|
|
|
.bios_param = ata_std_bios_param,
|
2006-11-22 17:57:36 +01:00
|
|
|
.resume = ata_scsi_device_resume,
|
|
|
|
.suspend = ata_scsi_device_suspend,
|
2006-08-30 00:12:40 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_port_operations mpiix_port_ops = {
|
|
|
|
.port_disable = ata_port_disable,
|
|
|
|
.set_piomode = mpiix_set_piomode,
|
|
|
|
|
|
|
|
.tf_load = ata_tf_load,
|
|
|
|
.tf_read = ata_tf_read,
|
|
|
|
.check_status = ata_check_status,
|
|
|
|
.exec_command = ata_exec_command,
|
|
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
|
|
.thaw = ata_bmdma_thaw,
|
|
|
|
.error_handler = mpiix_error_handler,
|
|
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
|
|
.qc_issue = mpiix_qc_issue_prot,
|
|
|
|
.data_xfer = ata_pio_data_xfer,
|
|
|
|
|
|
|
|
.irq_handler = ata_interrupt,
|
|
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
|
|
|
|
.port_start = ata_port_start,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
|
|
{
|
|
|
|
/* Single threaded by the PCI probe logic */
|
|
|
|
static struct ata_probe_ent probe[2];
|
|
|
|
static int printed_version;
|
|
|
|
u16 idetim;
|
|
|
|
int enabled;
|
|
|
|
|
|
|
|
if (!printed_version++)
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
|
|
|
|
|
|
|
|
/* MPIIX has many functions which can be turned on or off according
|
|
|
|
to other devices present. Make sure IDE is enabled before we try
|
|
|
|
and use it */
|
|
|
|
|
|
|
|
pci_read_config_word(dev, IDETIM, &idetim);
|
|
|
|
if (!(idetim & ENABLED))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/* We do our own plumbing to avoid leaking special cases for whacko
|
|
|
|
ancient hardware into the core code. There are two issues to
|
|
|
|
worry about. #1 The chip is a bridge so if in legacy mode and
|
|
|
|
without BARs set fools the setup. #2 If you pci_disable_device
|
|
|
|
the MPIIX your box goes castors up */
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&probe[0].node);
|
|
|
|
probe[0].dev = pci_dev_to_dev(dev);
|
|
|
|
probe[0].port_ops = &mpiix_port_ops;
|
|
|
|
probe[0].sht = &mpiix_sht;
|
|
|
|
probe[0].pio_mask = 0x1F;
|
|
|
|
probe[0].irq = 14;
|
|
|
|
probe[0].irq_flags = SA_SHIRQ;
|
|
|
|
probe[0].port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
|
|
|
|
probe[0].n_ports = 1;
|
|
|
|
probe[0].port[0].cmd_addr = 0x1F0;
|
|
|
|
probe[0].port[0].ctl_addr = 0x3F6;
|
|
|
|
probe[0].port[0].altstatus_addr = 0x3F6;
|
|
|
|
|
|
|
|
/* The secondary lurks at different addresses but is otherwise
|
|
|
|
the same beastie */
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&probe[1].node);
|
|
|
|
probe[1] = probe[0];
|
|
|
|
probe[1].irq = 15;
|
|
|
|
probe[1].port[0].cmd_addr = 0x170;
|
|
|
|
probe[1].port[0].ctl_addr = 0x376;
|
|
|
|
probe[1].port[0].altstatus_addr = 0x376;
|
|
|
|
|
|
|
|
/* Let libata fill in the port details */
|
|
|
|
ata_std_ports(&probe[0].port[0]);
|
|
|
|
ata_std_ports(&probe[1].port[0]);
|
|
|
|
|
|
|
|
/* Now add the port that is active */
|
|
|
|
enabled = (idetim & SECONDARY) ? 1 : 0;
|
|
|
|
|
|
|
|
if (ata_device_add(&probe[enabled]))
|
|
|
|
return 0;
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct pci_device_id mpiix[] = {
|
2006-09-29 02:21:59 +02:00
|
|
|
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), },
|
|
|
|
|
|
|
|
{ },
|
2006-08-30 00:12:40 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_driver mpiix_pci_driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.id_table = mpiix,
|
|
|
|
.probe = mpiix_init_one,
|
2007-01-20 08:00:28 +01:00
|
|
|
.remove = ata_pci_remove_one,
|
2006-11-22 17:57:36 +01:00
|
|
|
.suspend = ata_pci_device_suspend,
|
|
|
|
.resume = ata_pci_device_resume,
|
2006-08-30 00:12:40 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __init mpiix_init(void)
|
|
|
|
{
|
|
|
|
return pci_register_driver(&mpiix_pci_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit mpiix_exit(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&mpiix_pci_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
|
|
MODULE_DESCRIPTION("low-level driver for Intel MPIIX");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DEVICE_TABLE(pci, mpiix);
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
|
|
|
|
module_init(mpiix_init);
|
|
|
|
module_exit(mpiix_exit);
|