2005-04-17 00:20:36 +02:00
|
|
|
/*
|
2005-08-29 02:18:39 +02:00
|
|
|
* ata_piix.c - Intel PATA/SATA controllers
|
|
|
|
*
|
|
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
|
|
* on emails.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* Copyright 2003-2005 Red Hat Inc
|
|
|
|
* Copyright 2003-2005 Jeff Garzik
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* Copyright header from piix.c:
|
|
|
|
*
|
|
|
|
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
|
|
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
|
|
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
|
|
* any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; see the file COPYING. If not, write to
|
|
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
|
|
* as Documentation/DocBook/libata.*
|
|
|
|
*
|
|
|
|
* Hardware documentation available at http://developer.intel.com/
|
|
|
|
*
|
2005-12-08 20:19:50 +01:00
|
|
|
* Documentation
|
|
|
|
* Publically available from Intel web site. Errata documentation
|
|
|
|
* is also publically available. As an aide to anyone hacking on this
|
|
|
|
* driver the list of errata that are relevant is below.going back to
|
|
|
|
* PIIX4. Older device documentation is now a bit tricky to find.
|
|
|
|
*
|
|
|
|
* The chipsets all follow very much the same design. The orginal Triton
|
|
|
|
* series chipsets do _not_ support independant device timings, but this
|
|
|
|
* is fixed in Triton II. With the odd mobile exception the chips then
|
|
|
|
* change little except in gaining more modes until SATA arrives. This
|
|
|
|
* driver supports only the chips with independant timing (that is those
|
|
|
|
* with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
|
|
|
|
* for the early chip drivers.
|
|
|
|
*
|
|
|
|
* Errata of note:
|
|
|
|
*
|
|
|
|
* Unfixable
|
|
|
|
* PIIX4 errata #9 - Only on ultra obscure hw
|
|
|
|
* ICH3 errata #13 - Not observed to affect real hw
|
|
|
|
* by Intel
|
|
|
|
*
|
|
|
|
* Things we must deal with
|
|
|
|
* PIIX4 errata #10 - BM IDE hang with non UDMA
|
|
|
|
* (must stop/start dma to recover)
|
|
|
|
* 440MX errata #15 - As PIIX4 errata #10
|
|
|
|
* PIIX4 errata #15 - Must not read control registers
|
|
|
|
* during a PIO transfer
|
|
|
|
* 440MX errata #13 - As PIIX4 errata #15
|
|
|
|
* ICH2 errata #21 - DMA mode 0 doesn't work right
|
|
|
|
* ICH0/1 errata #55 - As ICH2 errata #21
|
|
|
|
* ICH2 spec c #9 - Extra operations needed to handle
|
|
|
|
* drive hotswap [NOT YET SUPPORTED]
|
|
|
|
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
|
|
|
|
* and must be dword aligned
|
|
|
|
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
|
|
|
|
*
|
|
|
|
* Should have been BIOS fixed:
|
|
|
|
* 450NX: errata #19 - DMA hangs on old 450NX
|
|
|
|
* 450NX: errata #20 - DMA hangs on old 450NX
|
|
|
|
* 450NX: errata #25 - Corruption with DMA on old 450NX
|
|
|
|
* ICH3 errata #15 - IDE deadlock under high load
|
|
|
|
* (BIOS must set dev 31 fn 0 bit 23)
|
|
|
|
* ICH3 errata #18 - Don't use native mode
|
2005-04-17 00:20:36 +02:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/delay.h>
|
2005-10-30 12:42:18 +01:00
|
|
|
#include <linux/device.h>
|
2005-04-17 00:20:36 +02:00
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
|
|
|
|
#define DRV_NAME "ata_piix"
|
2005-11-16 17:06:59 +01:00
|
|
|
#define DRV_VERSION "1.05"
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
enum {
|
|
|
|
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
|
|
|
|
ICH5_PMR = 0x90, /* port mapping register */
|
|
|
|
ICH5_PCS = 0x92, /* port control and status */
|
2005-07-28 21:54:15 +02:00
|
|
|
PIIX_SCC = 0x0A, /* sub-class code register */
|
2005-04-17 00:20:36 +02:00
|
|
|
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
|
|
|
|
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
|
|
|
|
PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */
|
|
|
|
/* ICH6/7 use different scheme for map value */
|
|
|
|
PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30),
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
/* combined mode. if set, PATA is channel 0.
|
|
|
|
* if clear, PATA is channel 1.
|
|
|
|
*/
|
|
|
|
PIIX_COMB_PATA_P0 = (1 << 1),
|
|
|
|
PIIX_COMB = (1 << 2), /* combined mode enabled? */
|
|
|
|
|
2005-06-29 02:30:38 +02:00
|
|
|
PIIX_PORT_ENABLED = (1 << 0),
|
|
|
|
PIIX_PORT_PRESENT = (1 << 4),
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
PIIX_80C_PRI = (1 << 5) | (1 << 4),
|
|
|
|
PIIX_80C_SEC = (1 << 7) | (1 << 6),
|
|
|
|
|
2006-02-28 17:25:39 +01:00
|
|
|
/* controller IDs */
|
|
|
|
piix4_pata = 0,
|
|
|
|
ich5_pata = 1,
|
|
|
|
ich5_sata = 2,
|
|
|
|
esb_sata = 3,
|
|
|
|
ich6_sata = 4,
|
|
|
|
ich6_sata_ahci = 5,
|
|
|
|
ich6m_sata_ahci = 6,
|
2005-07-28 21:54:15 +02:00
|
|
|
|
|
|
|
PIIX_AHCI_DEVICE = 6,
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static int piix_init_one (struct pci_dev *pdev,
|
|
|
|
const struct pci_device_id *ent);
|
|
|
|
|
2006-02-15 07:01:42 +01:00
|
|
|
static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
|
2006-02-15 07:01:42 +01:00
|
|
|
static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
|
2005-04-17 00:20:36 +02:00
|
|
|
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
|
|
|
|
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
|
|
|
|
|
|
|
|
static unsigned int in_module_init = 1;
|
|
|
|
|
2005-11-10 17:04:11 +01:00
|
|
|
static const struct pci_device_id piix_pci_tbl[] = {
|
2005-04-17 00:20:36 +02:00
|
|
|
#ifdef ATA_ENABLE_PATA
|
|
|
|
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata },
|
|
|
|
{ 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata },
|
|
|
|
{ 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata },
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* NOTE: The following PCI ids must be kept in sync with the
|
|
|
|
* list in drivers/pci/quirks.c.
|
|
|
|
*/
|
|
|
|
|
2006-02-28 17:25:39 +01:00
|
|
|
/* 82801EB (ICH5) */
|
2005-04-17 00:20:36 +02:00
|
|
|
{ 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* 82801EB (ICH5) */
|
2005-04-17 00:20:36 +02:00
|
|
|
{ 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* 6300ESB (ICH5 variant with broken PCS present bits) */
|
|
|
|
{ 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata },
|
|
|
|
/* 6300ESB pretending RAID */
|
|
|
|
{ 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata },
|
|
|
|
/* 82801FB/FW (ICH6/ICH6W) */
|
2005-04-17 00:20:36 +02:00
|
|
|
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* 82801FR/FRW (ICH6R/ICH6RW) */
|
2005-11-15 00:20:23 +01:00
|
|
|
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
|
|
|
|
{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
|
|
|
|
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
|
2005-11-15 00:20:23 +01:00
|
|
|
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
|
|
|
|
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
|
|
|
|
/* Enterprise Southbridge 2 (where's the datasheet?) */
|
2005-11-15 00:20:23 +01:00
|
|
|
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* SATA Controller 1 IDE (ICH8, no datasheet yet) */
|
2006-01-17 21:28:48 +01:00
|
|
|
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* SATA Controller 2 IDE (ICH8, ditto) */
|
2006-01-17 21:28:48 +01:00
|
|
|
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
2006-02-28 17:25:39 +01:00
|
|
|
/* Mobile SATA Controller IDE (ICH8M, ditto) */
|
|
|
|
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
{ } /* terminate list */
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_driver piix_pci_driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.id_table = piix_pci_tbl,
|
|
|
|
.probe = piix_init_one,
|
|
|
|
.remove = ata_pci_remove_one,
|
2006-01-06 09:28:07 +01:00
|
|
|
.suspend = ata_pci_device_suspend,
|
|
|
|
.resume = ata_pci_device_resume,
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
|
|
|
|
2005-11-07 06:59:37 +01:00
|
|
|
static struct scsi_host_template piix_sht = {
|
2005-04-17 00:20:36 +02:00
|
|
|
.module = THIS_MODULE,
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.ioctl = ata_scsi_ioctl,
|
|
|
|
.queuecommand = ata_scsi_queuecmd,
|
2006-02-10 07:10:48 +01:00
|
|
|
.eh_timed_out = ata_scsi_timed_out,
|
2005-04-17 00:20:36 +02:00
|
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
|
|
.emulated = ATA_SHT_EMULATED,
|
|
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
|
|
.proc_name = DRV_NAME,
|
|
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
|
|
.slave_configure = ata_scsi_slave_config,
|
|
|
|
.bios_param = ata_std_bios_param,
|
2006-01-06 09:28:07 +01:00
|
|
|
.resume = ata_scsi_device_resume,
|
|
|
|
.suspend = ata_scsi_device_suspend,
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
|
|
|
|
2005-10-22 20:27:05 +02:00
|
|
|
static const struct ata_port_operations piix_pata_ops = {
|
2005-04-17 00:20:36 +02:00
|
|
|
.port_disable = ata_port_disable,
|
|
|
|
.set_piomode = piix_set_piomode,
|
|
|
|
.set_dmamode = piix_set_dmamode,
|
|
|
|
|
|
|
|
.tf_load = ata_tf_load,
|
|
|
|
.tf_read = ata_tf_read,
|
|
|
|
.check_status = ata_check_status,
|
|
|
|
.exec_command = ata_exec_command,
|
|
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
|
2006-02-15 07:01:42 +01:00
|
|
|
.probe_reset = piix_pata_probe_reset,
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
|
|
.bmdma_start = ata_bmdma_start,
|
|
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
|
|
|
|
.eng_timeout = ata_eng_timeout,
|
|
|
|
|
|
|
|
.irq_handler = ata_interrupt,
|
|
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
|
|
|
|
.port_start = ata_port_start,
|
|
|
|
.port_stop = ata_port_stop,
|
2005-05-27 03:54:27 +02:00
|
|
|
.host_stop = ata_host_stop,
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
|
|
|
|
2005-10-22 20:27:05 +02:00
|
|
|
static const struct ata_port_operations piix_sata_ops = {
|
2005-04-17 00:20:36 +02:00
|
|
|
.port_disable = ata_port_disable,
|
|
|
|
|
|
|
|
.tf_load = ata_tf_load,
|
|
|
|
.tf_read = ata_tf_read,
|
|
|
|
.check_status = ata_check_status,
|
|
|
|
.exec_command = ata_exec_command,
|
|
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
|
2006-02-15 07:01:42 +01:00
|
|
|
.probe_reset = piix_sata_probe_reset,
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
|
|
.bmdma_start = ata_bmdma_start,
|
|
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
|
|
|
|
.eng_timeout = ata_eng_timeout,
|
|
|
|
|
|
|
|
.irq_handler = ata_interrupt,
|
|
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
|
|
|
|
.port_start = ata_port_start,
|
|
|
|
.port_stop = ata_port_stop,
|
2005-05-27 03:54:27 +02:00
|
|
|
.host_stop = ata_host_stop,
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_port_info piix_port_info[] = {
|
2006-02-28 17:25:39 +01:00
|
|
|
/* piix4_pata */
|
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
|
|
|
.host_flags = ATA_FLAG_SLAVE_POSS,
|
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
|
|
#if 0
|
|
|
|
.mwdma_mask = 0x06, /* mwdma1-2 */
|
|
|
|
#else
|
|
|
|
.mwdma_mask = 0x00, /* mwdma broken */
|
|
|
|
#endif
|
|
|
|
.udma_mask = ATA_UDMA_MASK_40C,
|
|
|
|
.port_ops = &piix_pata_ops,
|
|
|
|
},
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
/* ich5_pata */
|
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
2006-02-15 07:01:42 +01:00
|
|
|
.host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
|
2005-04-17 00:20:36 +02:00
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
|
|
#if 0
|
|
|
|
.mwdma_mask = 0x06, /* mwdma1-2 */
|
|
|
|
#else
|
|
|
|
.mwdma_mask = 0x00, /* mwdma broken */
|
|
|
|
#endif
|
|
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
|
|
.port_ops = &piix_pata_ops,
|
|
|
|
},
|
|
|
|
|
|
|
|
/* ich5_sata */
|
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
2006-02-15 07:01:42 +01:00
|
|
|
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
|
|
|
|
PIIX_FLAG_CHECKINTR,
|
2005-04-17 00:20:36 +02:00
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
|
|
.port_ops = &piix_sata_ops,
|
|
|
|
},
|
|
|
|
|
2006-02-28 17:25:39 +01:00
|
|
|
/* i6300esb_sata */
|
2005-04-17 00:20:36 +02:00
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
2006-02-28 17:25:39 +01:00
|
|
|
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
|
|
|
|
PIIX_FLAG_CHECKINTR,
|
2005-04-17 00:20:36 +02:00
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
2006-02-28 17:25:39 +01:00
|
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
|
|
.port_ops = &piix_sata_ops,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
|
|
|
/* ich6_sata */
|
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
2006-02-15 07:01:42 +01:00
|
|
|
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS,
|
2005-04-17 00:20:36 +02:00
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
|
|
.port_ops = &piix_sata_ops,
|
|
|
|
},
|
|
|
|
|
2005-11-15 00:20:23 +01:00
|
|
|
/* ich6_sata_ahci */
|
2005-04-17 00:24:44 +02:00
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
2006-02-15 07:01:42 +01:00
|
|
|
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS |
|
|
|
|
PIIX_FLAG_AHCI,
|
2005-04-17 00:24:44 +02:00
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
|
|
.port_ops = &piix_sata_ops,
|
|
|
|
},
|
2006-02-28 17:25:39 +01:00
|
|
|
|
|
|
|
/* ich6m_sata_ahci */
|
|
|
|
{
|
|
|
|
.sht = &piix_sht,
|
|
|
|
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
|
|
|
|
PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS |
|
|
|
|
PIIX_FLAG_AHCI,
|
|
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
|
|
.port_ops = &piix_sata_ops,
|
|
|
|
},
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_bits piix_enable_bits[] = {
|
|
|
|
{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
|
|
|
|
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik");
|
|
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* piix_pata_cbl_detect - Probe host controller cable detect info
|
|
|
|
* @ap: Port for which cable detect info is desired
|
|
|
|
*
|
|
|
|
* Read 80c cable indicator from ATA PCI device's PCI config
|
|
|
|
* register. This register is normally set by firmware (BIOS).
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*/
|
|
|
|
static void piix_pata_cbl_detect(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
|
|
u8 tmp, mask;
|
|
|
|
|
|
|
|
/* no 80c support in host controller? */
|
|
|
|
if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
|
|
|
|
goto cbl40;
|
|
|
|
|
|
|
|
/* check BIOS cable detect results */
|
|
|
|
mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
|
|
|
|
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
|
|
|
|
if ((tmp & mask) == 0)
|
|
|
|
goto cbl40;
|
|
|
|
|
|
|
|
ap->cbl = ATA_CBL_PATA80;
|
|
|
|
return;
|
|
|
|
|
|
|
|
cbl40:
|
|
|
|
ap->cbl = ATA_CBL_PATA40;
|
|
|
|
ap->udma_mask &= ATA_UDMA_MASK_40C;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2006-02-15 07:01:42 +01:00
|
|
|
* piix_pata_probeinit - probeinit for PATA host controller
|
|
|
|
* @ap: Target port
|
2005-04-17 00:20:36 +02:00
|
|
|
*
|
2006-02-15 07:01:42 +01:00
|
|
|
* Probeinit including cable detection.
|
2005-04-17 00:20:36 +02:00
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*/
|
2006-02-15 07:01:42 +01:00
|
|
|
static void piix_pata_probeinit(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
piix_pata_cbl_detect(ap);
|
|
|
|
ata_std_probeinit(ap);
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
2006-02-15 07:01:42 +01:00
|
|
|
/**
|
|
|
|
* piix_pata_probe_reset - Perform reset on PATA port and classify
|
|
|
|
* @ap: Port to reset
|
|
|
|
* @classes: Resulting classes of attached devices
|
|
|
|
*
|
|
|
|
* Reset PATA phy and classify attached devices.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*/
|
|
|
|
static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
|
2005-04-17 00:20:36 +02:00
|
|
|
{
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
|
|
|
|
|
|
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
|
|
|
|
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
|
2006-02-15 07:01:42 +01:00
|
|
|
return 0;
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
|
2006-02-15 07:01:42 +01:00
|
|
|
return ata_drive_probe_reset(ap, piix_pata_probeinit,
|
|
|
|
ata_std_softreset, NULL,
|
|
|
|
ata_std_postreset, classes);
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* piix_sata_probe - Probe PCI device for present SATA devices
|
|
|
|
* @ap: Port associated with the PCI device we wish to probe
|
|
|
|
*
|
|
|
|
* Reads SATA PCI device's PCI config register Port Configuration
|
|
|
|
* and Status (PCS) to determine port and device availability.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*
|
|
|
|
* RETURNS:
|
2005-06-29 02:30:38 +02:00
|
|
|
* Non-zero if port is enabled, it may or may not have a device
|
|
|
|
* attached in that case (PRESENT bit would only be set if BIOS probe
|
|
|
|
* was done). Zero is returned if port is disabled.
|
2005-04-17 00:20:36 +02:00
|
|
|
*/
|
|
|
|
static int piix_sata_probe (struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
|
|
int combined = (ap->flags & ATA_FLAG_SLAVE_POSS);
|
|
|
|
int orig_mask, mask, i;
|
|
|
|
u8 pcs;
|
|
|
|
|
|
|
|
pci_read_config_byte(pdev, ICH5_PCS, &pcs);
|
|
|
|
orig_mask = (int) pcs & 0xff;
|
|
|
|
|
|
|
|
/* TODO: this is vaguely wrong for ICH6 combined mode,
|
|
|
|
* where only two of the four SATA ports are mapped
|
|
|
|
* onto a single ATA channel. It is also vaguely inaccurate
|
|
|
|
* for ICH5, which has only two ports. However, this is ok,
|
|
|
|
* as further device presence detection code will handle
|
|
|
|
* any false positives produced here.
|
|
|
|
*/
|
|
|
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
2005-06-29 02:30:38 +02:00
|
|
|
mask = (PIIX_PORT_ENABLED << i);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
if ((orig_mask & mask) == mask)
|
|
|
|
if (combined || (i == ap->hard_port_no))
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2006-02-15 07:01:42 +01:00
|
|
|
* piix_sata_probe_reset - Perform reset on SATA port and classify
|
|
|
|
* @ap: Port to reset
|
|
|
|
* @classes: Resulting classes of attached devices
|
2005-04-17 00:20:36 +02:00
|
|
|
*
|
2006-02-15 07:01:42 +01:00
|
|
|
* Reset SATA phy and classify attached devices.
|
2005-04-17 00:20:36 +02:00
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*/
|
2006-02-15 07:01:42 +01:00
|
|
|
static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes)
|
2005-04-17 00:20:36 +02:00
|
|
|
{
|
|
|
|
if (!piix_sata_probe(ap)) {
|
|
|
|
printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
|
2006-02-15 07:01:42 +01:00
|
|
|
return 0;
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
|
2006-02-15 07:01:42 +01:00
|
|
|
return ata_drive_probe_reset(ap, ata_std_probeinit,
|
|
|
|
ata_std_softreset, NULL,
|
|
|
|
ata_std_postreset, classes);
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* piix_set_piomode - Initialize host controller PATA PIO timings
|
|
|
|
* @ap: Port whose timings we are configuring
|
|
|
|
* @adev: um
|
|
|
|
*
|
|
|
|
* Set PIO mode for device, in host controller PCI config space.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
|
|
{
|
|
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
|
|
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
|
|
|
|
unsigned int is_slave = (adev->devno != 0);
|
|
|
|
unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40;
|
|
|
|
unsigned int slave_port = 0x44;
|
|
|
|
u16 master_data;
|
|
|
|
u8 slave_data;
|
|
|
|
|
|
|
|
static const /* ISP RTC */
|
|
|
|
u8 timings[][2] = { { 0, 0 },
|
|
|
|
{ 0, 0 },
|
|
|
|
{ 1, 0 },
|
|
|
|
{ 2, 1 },
|
|
|
|
{ 2, 3 }, };
|
|
|
|
|
|
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
|
|
if (is_slave) {
|
|
|
|
master_data |= 0x4000;
|
|
|
|
/* enable PPE, IE and TIME */
|
|
|
|
master_data |= 0x0070;
|
|
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
|
|
|
slave_data &= (ap->hard_port_no ? 0x0f : 0xf0);
|
|
|
|
slave_data |=
|
|
|
|
(timings[pio][0] << 2) |
|
|
|
|
(timings[pio][1] << (ap->hard_port_no ? 4 : 0));
|
|
|
|
} else {
|
|
|
|
master_data &= 0xccf8;
|
|
|
|
/* enable PPE, IE and TIME */
|
|
|
|
master_data |= 0x0007;
|
|
|
|
master_data |=
|
|
|
|
(timings[pio][0] << 12) |
|
|
|
|
(timings[pio][1] << 8);
|
|
|
|
}
|
|
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
|
|
if (is_slave)
|
|
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* piix_set_dmamode - Initialize host controller PATA PIO timings
|
|
|
|
* @ap: Port whose timings we are configuring
|
|
|
|
* @adev: um
|
|
|
|
* @udma: udma mode, 0 - 6
|
|
|
|
*
|
|
|
|
* Set UDMA mode for device, in host controller PCI config space.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* None (inherited from caller).
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
|
|
{
|
|
|
|
unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */
|
|
|
|
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
|
|
|
|
u8 maslave = ap->hard_port_no ? 0x42 : 0x40;
|
|
|
|
u8 speed = udma;
|
|
|
|
unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno;
|
|
|
|
int a_speed = 3 << (drive_dn * 4);
|
|
|
|
int u_flag = 1 << drive_dn;
|
|
|
|
int v_flag = 0x01 << drive_dn;
|
|
|
|
int w_flag = 0x10 << drive_dn;
|
|
|
|
int u_speed = 0;
|
|
|
|
int sitre;
|
|
|
|
u16 reg4042, reg4a;
|
|
|
|
u8 reg48, reg54, reg55;
|
|
|
|
|
|
|
|
pci_read_config_word(dev, maslave, ®4042);
|
|
|
|
DPRINTK("reg4042 = 0x%04x\n", reg4042);
|
|
|
|
sitre = (reg4042 & 0x4000) ? 1 : 0;
|
|
|
|
pci_read_config_byte(dev, 0x48, ®48);
|
|
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
|
|
pci_read_config_byte(dev, 0x54, ®54);
|
|
|
|
pci_read_config_byte(dev, 0x55, ®55);
|
|
|
|
|
|
|
|
switch(speed) {
|
|
|
|
case XFER_UDMA_4:
|
|
|
|
case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break;
|
|
|
|
case XFER_UDMA_6:
|
|
|
|
case XFER_UDMA_5:
|
|
|
|
case XFER_UDMA_3:
|
|
|
|
case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break;
|
|
|
|
case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break;
|
|
|
|
case XFER_MW_DMA_2:
|
|
|
|
case XFER_MW_DMA_1: break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
|
|
if (!(reg48 & u_flag))
|
|
|
|
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
|
|
|
|
if (speed == XFER_UDMA_5) {
|
|
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
|
|
|
|
} else {
|
|
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
|
|
|
}
|
|
|
|
if ((reg4a & a_speed) != u_speed)
|
|
|
|
pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
|
|
|
|
if (speed > XFER_UDMA_2) {
|
|
|
|
if (!(reg54 & v_flag))
|
|
|
|
pci_write_config_byte(dev, 0x54, reg54 | v_flag);
|
|
|
|
} else
|
|
|
|
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
|
|
|
} else {
|
|
|
|
if (reg48 & u_flag)
|
|
|
|
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
|
|
|
|
if (reg4a & a_speed)
|
|
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
|
|
if (reg54 & v_flag)
|
|
|
|
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
|
|
|
if (reg55 & w_flag)
|
|
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define AHCI_PCI_BAR 5
|
|
|
|
#define AHCI_GLOBAL_CTL 0x04
|
|
|
|
#define AHCI_ENABLE (1 << 31)
|
|
|
|
static int piix_disable_ahci(struct pci_dev *pdev)
|
|
|
|
{
|
2005-08-30 11:18:18 +02:00
|
|
|
void __iomem *mmio;
|
2005-04-17 00:20:36 +02:00
|
|
|
u32 tmp;
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
/* BUG: pci_enable_device has not yet been called. This
|
|
|
|
* works because this device is usually set up by BIOS.
|
|
|
|
*/
|
|
|
|
|
2005-08-30 11:42:52 +02:00
|
|
|
if (!pci_resource_start(pdev, AHCI_PCI_BAR) ||
|
|
|
|
!pci_resource_len(pdev, AHCI_PCI_BAR))
|
2005-04-17 00:20:36 +02:00
|
|
|
return 0;
|
2005-07-28 21:54:15 +02:00
|
|
|
|
2005-08-30 11:42:52 +02:00
|
|
|
mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64);
|
2005-04-17 00:20:36 +02:00
|
|
|
if (!mmio)
|
|
|
|
return -ENOMEM;
|
2005-07-28 21:54:15 +02:00
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
tmp = readl(mmio + AHCI_GLOBAL_CTL);
|
|
|
|
if (tmp & AHCI_ENABLE) {
|
|
|
|
tmp &= ~AHCI_ENABLE;
|
|
|
|
writel(tmp, mmio + AHCI_GLOBAL_CTL);
|
|
|
|
|
|
|
|
tmp = readl(mmio + AHCI_GLOBAL_CTL);
|
|
|
|
if (tmp & AHCI_ENABLE)
|
|
|
|
rc = -EIO;
|
|
|
|
}
|
2005-07-28 21:54:15 +02:00
|
|
|
|
2005-08-30 11:42:52 +02:00
|
|
|
pci_iounmap(pdev, mmio);
|
2005-04-17 00:20:36 +02:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2005-12-08 20:22:28 +01:00
|
|
|
/**
|
|
|
|
* piix_check_450nx_errata - Check for problem 450NX setup
|
2006-01-28 19:15:32 +01:00
|
|
|
* @ata_dev: the PCI device to check
|
2005-12-08 20:22:28 +01:00
|
|
|
*
|
|
|
|
* Check for the present of 450NX errata #19 and errata #25. If
|
|
|
|
* they are found return an error code so we can turn off DMA
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = NULL;
|
|
|
|
u16 cfg;
|
|
|
|
u8 rev;
|
|
|
|
int no_piix_dma = 0;
|
|
|
|
|
|
|
|
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
|
|
|
|
{
|
|
|
|
/* Look for 450NX PXB. Check for problem configurations
|
|
|
|
A PCI quirk checks bit 6 already */
|
|
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
|
|
|
|
pci_read_config_word(pdev, 0x41, &cfg);
|
|
|
|
/* Only on the original revision: IDE DMA can hang */
|
|
|
|
if(rev == 0x00)
|
|
|
|
no_piix_dma = 1;
|
|
|
|
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
|
|
|
|
else if(cfg & (1<<14) && rev < 5)
|
|
|
|
no_piix_dma = 2;
|
|
|
|
}
|
|
|
|
if(no_piix_dma)
|
|
|
|
dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
|
|
|
|
if(no_piix_dma == 2)
|
|
|
|
dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
|
|
|
|
return no_piix_dma;
|
|
|
|
}
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
/**
|
|
|
|
* piix_init_one - Register PIIX ATA PCI device with kernel services
|
|
|
|
* @pdev: PCI device to register
|
|
|
|
* @ent: Entry in piix_pci_tbl matching with @pdev
|
|
|
|
*
|
|
|
|
* Called from kernel PCI layer. We probe for combined mode (sigh),
|
|
|
|
* and then hand over control to libata, for it to do the rest.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* Inherited from PCI layer (may sleep).
|
|
|
|
*
|
|
|
|
* RETURNS:
|
|
|
|
* Zero on success, or -ERRNO value.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
|
|
{
|
|
|
|
static int printed_version;
|
|
|
|
struct ata_port_info *port_info[2];
|
2005-10-30 13:57:31 +01:00
|
|
|
unsigned int combined = 0;
|
2005-04-17 00:20:36 +02:00
|
|
|
unsigned int pata_chan = 0, sata_chan = 0;
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
unsigned long host_flags;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
if (!printed_version++)
|
2005-10-30 12:42:18 +01:00
|
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
|
|
"version " DRV_VERSION "\n");
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
/* no hotplugging support (FIXME) */
|
|
|
|
if (!in_module_init)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
port_info[0] = &piix_port_info[ent->driver_data];
|
2005-10-30 13:57:31 +01:00
|
|
|
port_info[1] = &piix_port_info[ent->driver_data];
|
2005-04-17 00:20:36 +02:00
|
|
|
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
host_flags = port_info[0]->host_flags;
|
|
|
|
|
|
|
|
if (host_flags & PIIX_FLAG_AHCI) {
|
2005-07-31 19:13:24 +02:00
|
|
|
u8 tmp;
|
|
|
|
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
|
|
|
|
if (tmp == PIIX_AHCI_DEVICE) {
|
|
|
|
int rc = piix_disable_ahci(pdev);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
if (host_flags & PIIX_FLAG_COMBINED) {
|
2005-04-17 00:20:36 +02:00
|
|
|
u8 tmp;
|
|
|
|
pci_read_config_byte(pdev, ICH5_PMR, &tmp);
|
|
|
|
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
if (host_flags & PIIX_FLAG_COMBINED_ICH6) {
|
2006-01-28 18:26:23 +01:00
|
|
|
switch (tmp & 0x3) {
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
case 0:
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
combined = 1;
|
2005-04-17 00:20:36 +02:00
|
|
|
sata_chan = 1;
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
combined = 1;
|
2005-04-17 00:20:36 +02:00
|
|
|
pata_chan = 1;
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
|
|
"invalid MAP value %u\n", tmp);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (tmp & PIIX_COMB) {
|
|
|
|
combined = 1;
|
|
|
|
if (tmp & PIIX_COMB_PATA_P0)
|
|
|
|
sata_chan = 1;
|
|
|
|
else
|
|
|
|
pata_chan = 1;
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* On ICH5, some BIOSen disable the interrupt using the
|
|
|
|
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
|
|
|
|
* On ICH6, this bit has the same effect, but only when
|
|
|
|
* MSI is disabled (and it is disabled, as we don't use
|
|
|
|
* message-signalled interrupts currently).
|
|
|
|
*/
|
[PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE. This patch makes ata_piix interpret MV properly on ICH6/7.
Pre-ICH6/7
The value of these bits indicate the address range the SATA port
responds to, and whether or not the SATA and IDE functions are
combined.
000 = Non-combined. P0 is primary master. P1 is secondary master.
001 = Non-combined. P0 is secondary master. P1 is primary master.
100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
2:0 Map Value secondary.
101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
secondary.
110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
secondary slave.
111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
secondary master.
ICH6/7
Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.
00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
is secondary master, P3 is the 1:0 secondary slave (desktop
only). P0 is primary master, P2 is the primary slave (mobile
only).
01 = Combined. IDE is primary. P1 is secondary master, P3 is the
secondary slave. (desktop only)
10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
11 = Reserved
Signed-off-by: Tejun Heo <htejun@gmail.com>
--
Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.
Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-18 09:17:07 +01:00
|
|
|
if (host_flags & PIIX_FLAG_CHECKINTR)
|
2005-08-15 21:23:41 +02:00
|
|
|
pci_intx(pdev, 1);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
if (combined) {
|
|
|
|
port_info[sata_chan] = &piix_port_info[ent->driver_data];
|
|
|
|
port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS;
|
|
|
|
port_info[pata_chan] = &piix_port_info[ich5_pata];
|
|
|
|
|
2005-10-30 12:42:18 +01:00
|
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
|
|
"combined mode detected (p=%u, s=%u)\n",
|
|
|
|
pata_chan, sata_chan);
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
2005-12-08 20:22:28 +01:00
|
|
|
if (piix_check_450nx_errata(pdev)) {
|
|
|
|
/* This writes into the master table but it does not
|
|
|
|
really matter for this errata as we will apply it to
|
|
|
|
all the PIIX devices on the board */
|
|
|
|
port_info[0]->mwdma_mask = 0;
|
|
|
|
port_info[0]->udma_mask = 0;
|
|
|
|
port_info[1]->mwdma_mask = 0;
|
|
|
|
port_info[1]->udma_mask = 0;
|
|
|
|
}
|
2005-10-30 13:57:31 +01:00
|
|
|
return ata_pci_init_one(pdev, port_info, 2);
|
2005-04-17 00:20:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static int __init piix_init(void)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
DPRINTK("pci_module_init\n");
|
|
|
|
rc = pci_module_init(&piix_pci_driver);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
in_module_init = 0;
|
|
|
|
|
|
|
|
DPRINTK("done\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit piix_exit(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&piix_pci_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(piix_init);
|
|
|
|
module_exit(piix_exit);
|
|
|
|
|