OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/kernel/asm-offsets.c

149 lines
5.8 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* Copyright (C) 1995-2003 Russell King
* 2001-2002 Keith Owens
*
* Generate definitions needed by assembly language modules.
* This code generates raw asm output which is post-processed to extract
* and format the required data.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/mm.h>
ARM: dma-mapping: provide per-cpu type map/unmap functions Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-11-26 17:19:58 +01:00
#include <linux/dma-mapping.h>
ARM: pm: add generic CPU suspend/resume support This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-06 16:48:39 +01:00
#include <asm/cacheflush.h>
ARM: move cache/processor/fault glue to separate include files This allows the cache/processor/fault glue to be more easily used from assembler code. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-06 16:32:24 +01:00
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
[ARM] Include asm/elf.h instead of asm/procinfo.h These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-09 15:20:47 +01:00
#include <asm/procinfo.h>
ARM: 7114/1: cache-l2x0: add resume entry for l2 in secure mode we save the l2x0 registers at the first initialization, and platform codes can get them to restore l2x0 status after wakeup. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-30 15:43:12 +02:00
#include <asm/hardware/cache-l2x0.h>
arm: use kbuild.h instead of macros in asm-offsets.c Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 10:03:59 +02:00
#include <linux/kbuild.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* Make sure that the compiler and target are compatible.
*/
#if defined(__APCS_26__)
#error Sorry, your compiler targets APCS-26 but this kernel requires APCS-32
#endif
/*
* GCC 3.0, 3.1: general bad code generation.
* GCC 3.2.0: incorrect function argument offset calculation.
* GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
* (http://gcc.gnu.org/PR8896) and incorrect structure
* initialisation in fs/jffs2/erase.c
*/
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 10:04:09 +01:00
#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#error Your compiler is too buggy; it is known to miscompile kernels.
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 10:04:09 +01:00
#error Known good compilers: 3.3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif
int main(void)
{
DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
ARM: stack protector: change the canary value per task A new random value for the canary is stored in the task struct whenever a new task is forked. This is meant to allow for different canary values per task. On ARM, GCC expects the canary value to be found in a global variable called __stack_chk_guard. So this variable has to be updated with the value stored in the task struct whenever a task switch occurs. Because the variable GCC expects is global, this cannot work on SMP unfortunately. So, on SMP, the same initial canary value is kept throughout, making this feature a bit less effective although it is still useful. One way to overcome this GCC limitation would be to locate the __stack_chk_guard variable into a memory page of its own for each CPU, and then use TLB locking to have each CPU see its own page at the same virtual address for each of them. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-06-08 03:50:33 +02:00
#ifdef CONFIG_CC_STACKPROTECTOR
DEFINE(TSK_STACK_CANARY, offsetof(struct task_struct, stack_canary));
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
BLANK();
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_CPU_DOMAIN, offsetof(struct thread_info, cpu_domain));
DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context));
DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp));
DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value));
DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate));
ARM: vfp: fix a hole in VFP thread migration Fix a hole in the VFP thread migration. Lets define two threads. Thread 1, we'll call 'interesting_thread' which is a thread which is running on CPU0, using VFP (so vfp_current_hw_state[0] = &interesting_thread->vfpstate) and gets migrated off to CPU1, where it continues execution of VFP instructions. Thread 2, we'll call 'new_cpu0_thread' which is the thread which takes over on CPU0. This has also been using VFP, and last used VFP on CPU0, but doesn't use it again. The following code will be executed twice: cpu = thread->cpu; /* * On SMP, if VFP is enabled, save the old state in * case the thread migrates to a different CPU. The * restoring is done lazily. */ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { vfp_save_state(vfp_current_hw_state[cpu], fpexc); vfp_current_hw_state[cpu]->hard.cpu = cpu; } /* * Thread migration, just force the reloading of the * state on the new CPU in case the VFP registers * contain stale data. */ if (thread->vfpstate.hard.cpu != cpu) vfp_current_hw_state[cpu] = NULL; The first execution will be on CPU0 to switch away from 'interesting_thread'. interesting_thread->cpu will be 0. So, vfp_current_hw_state[0] points at interesting_thread->vfpstate. The hardware state will be saved, along with the CPU number (0) that it was executing on. 'thread' will be 'new_cpu0_thread' with new_cpu0_thread->cpu = 0. Also, because it was executing on CPU0, new_cpu0_thread->vfpstate.hard.cpu = 0, and so the thread migration check is not triggered. This means that vfp_current_hw_state[0] remains pointing at interesting_thread. The second execution will be on CPU1 to switch _to_ 'interesting_thread'. So, 'thread' will be 'interesting_thread' and interesting_thread->cpu now will be 1. The previous thread executing on CPU1 is not relevant to this so we shall ignore that. We get to the thread migration check. Here, we discover that interesting_thread->vfpstate.hard.cpu = 0, yet interesting_thread->cpu is now 1, indicating thread migration. We set vfp_current_hw_state[1] to NULL. So, at this point vfp_current_hw_state[] contains the following: [0] = &interesting_thread->vfpstate [1] = NULL Our interesting thread now executes a VFP instruction, takes a fault which loads the state into the VFP hardware. Now, through the assembly we now have: [0] = &interesting_thread->vfpstate [1] = &interesting_thread->vfpstate CPU1 stops due to ptrace (and so saves its VFP state) using the thread switch code above), and CPU0 calls vfp_sync_hwstate(). if (vfp_current_hw_state[cpu] == &thread->vfpstate) { vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); BANG, we corrupt interesting_thread's VFP state by overwriting the more up-to-date state saved by CPU1 with the old VFP state from CPU0. Fix this by ensuring that we have sane semantics for the various state describing variables: 1. vfp_current_hw_state[] points to the current owner of the context information stored in each CPUs hardware, or NULL if that state information is invalid. 2. thread->vfpstate.hard.cpu always contains the most recent CPU number which the state was loaded into or NR_CPUS if no CPU owns the state. So, for a particular CPU to be a valid owner of the VFP state for a particular thread t, two things must be true: vfp_current_hw_state[cpu] == &t->vfpstate && t->vfpstate.hard.cpu == cpu. and that is valid from the moment a CPU loads the saved VFP context into the hardware. This gives clear and consistent semantics to interpreting these variables. This patch also fixes thread copying, ensuring that t->vfpstate.hard.cpu is invalidated, otherwise CPU0 may believe it was the last owner. The hole can happen thus: - thread1 runs on CPU2 using VFP, migrates to CPU3, exits and thread_info freed. - New thread allocated from a previously running thread on CPU2, reusing memory for thread1 and copying vfp.hard.cpu. At this point, the following are true: new_thread1->vfpstate.hard.cpu == 2 &new_thread1->vfpstate == vfp_current_hw_state[2] Lastly, this also addresses thread flushing in a similar way to thread copying. Hole is: - thread runs on CPU0, using VFP, migrates to CPU1 but does not use VFP. - thread calls execve(), so thread flush happens, leaving vfp_current_hw_state[0] intact. This vfpstate is memset to 0 causing thread->vfpstate.hard.cpu = 0. - thread migrates back to CPU0 before using VFP. At this point, the following are true: thread->vfpstate.hard.cpu == 0 &thread->vfpstate == vfp_current_hw_state[0] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-09 17:09:43 +02:00
#ifdef CONFIG_SMP
DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu));
#endif
ARMv7: Add support for the ThumbEE state saving/restoring This patch adds the detection and handling of the ThumbEE extension on ARMv7 CPUs. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18 23:43:06 +02:00
#ifdef CONFIG_ARM_THUMBEE
DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state));
#endif
[ARM] iwmmxt thread state alignment This patch removes the reliance of iwmmxt on hand coded alignments. Since thread_info is always 8K aligned, specifying that fpstate is 8-byte aligned achieves the same effect without needing to resort to hand coded alignments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-12 23:36:06 +01:00
#ifdef CONFIG_IWMMXT
DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt));
[ARM] 3370/2: ep93xx: add crunch support Patch from Lennert Buytenhek Add the necessary kernel bits for crunch task switching. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 00:03:03 +02:00
#endif
#ifdef CONFIG_CRUNCH
DEFINE(TI_CRUNCH_STATE, offsetof(struct thread_info, crunchstate));
[ARM] iwmmxt thread state alignment This patch removes the reliance of iwmmxt on hand coded alignments. Since thread_info is always 8K aligned, specifying that fpstate is 8-byte aligned achieves the same effect without needing to resort to hand coded alignments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-12 23:36:06 +01:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
BLANK();
[PATCH] ARM: pt_regs offsets Generate pt_regs S_xx offsets from the structure itself instead of #defining them. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 16:18:59 +02:00
DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0));
DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1));
DEFINE(S_R2, offsetof(struct pt_regs, ARM_r2));
DEFINE(S_R3, offsetof(struct pt_regs, ARM_r3));
DEFINE(S_R4, offsetof(struct pt_regs, ARM_r4));
DEFINE(S_R5, offsetof(struct pt_regs, ARM_r5));
DEFINE(S_R6, offsetof(struct pt_regs, ARM_r6));
DEFINE(S_R7, offsetof(struct pt_regs, ARM_r7));
DEFINE(S_R8, offsetof(struct pt_regs, ARM_r8));
DEFINE(S_R9, offsetof(struct pt_regs, ARM_r9));
DEFINE(S_R10, offsetof(struct pt_regs, ARM_r10));
DEFINE(S_FP, offsetof(struct pt_regs, ARM_fp));
DEFINE(S_IP, offsetof(struct pt_regs, ARM_ip));
DEFINE(S_SP, offsetof(struct pt_regs, ARM_sp));
DEFINE(S_LR, offsetof(struct pt_regs, ARM_lr));
DEFINE(S_PC, offsetof(struct pt_regs, ARM_pc));
DEFINE(S_PSR, offsetof(struct pt_regs, ARM_cpsr));
DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0));
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
BLANK();
ARM: 7114/1: cache-l2x0: add resume entry for l2 in secure mode we save the l2x0 registers at the first initialization, and platform codes can get them to restore l2x0 status after wakeup. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-30 15:43:12 +02:00
#ifdef CONFIG_CACHE_L2X0
DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base));
DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl));
DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency));
DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency));
DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start));
DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end));
DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl));
DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl));
BLANK();
#endif
[ARM] ARMv6: add CPU_HAS_ASID configuration Presently, we check for the minimum ARM architecture that we're building for to determine whether we need ASID support. This is wrong - if we're going to support a range of CPUs which include ARMv6 or higher, we need the ASID. Convert the checks to use a new configuration symbol, and arrange for ARMv6 and higher CPU entries to select it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17 11:19:23 +02:00
#ifdef CONFIG_CPU_HAS_ASID
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id));
BLANK();
#endif
DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm));
DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags));
BLANK();
DEFINE(VM_EXEC, VM_EXEC);
BLANK();
DEFINE(PAGE_SZ, PAGE_SIZE);
BLANK();
DEFINE(SYS_ERROR0, 0x9f0000);
BLANK();
DEFINE(SIZEOF_MACHINE_DESC, sizeof(struct machine_desc));
[ARM] 3496/1: more constants for asm-offsets.h Patch from Uwe Zeisberger added the following constants: - MACHINFO_TYPE - MACHINFO_NAME - MACHINFO_PHYSIO - MACHINFO_PGOFFIO - PROCINFO_INITFUNC - PROCINFO_MMUFLAGS and removed their definition from head.S and head-nommu.S Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 16:11:14 +02:00
DEFINE(MACHINFO_TYPE, offsetof(struct machine_desc, nr));
DEFINE(MACHINFO_NAME, offsetof(struct machine_desc, name));
[ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h Patch from Uwe Zeisberger The symbol is only used in arch/arm/kernel/head-common.S. This in turn is included from arch/arm/kernel/head.S and arch/arm/kernel/head-nommu.S which include asm-offsets.h . Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-10 19:11:05 +02:00
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
[ARM] 3496/1: more constants for asm-offsets.h Patch from Uwe Zeisberger added the following constants: - MACHINFO_TYPE - MACHINFO_NAME - MACHINFO_PHYSIO - MACHINFO_PGOFFIO - PROCINFO_INITFUNC - PROCINFO_MMUFLAGS and removed their definition from head.S and head-nommu.S Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 16:11:14 +02:00
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
[ARM] Set bit 4 on section mappings correctly depending on CPU On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 19:24:21 +02:00
DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags));
Add a prefetch abort handler This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18 23:43:07 +02:00
BLANK();
#ifdef MULTI_DABORT
DEFINE(PROCESSOR_DABT_FUNC, offsetof(struct processor, _data_abort));
#endif
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
ARM: pm: add generic CPU suspend/resume support This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-06 16:48:39 +01:00
#endif
#ifdef MULTI_CPU
DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size));
DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend));
DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume));
#endif
#ifdef MULTI_CACHE
DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
Add a prefetch abort handler This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18 23:43:07 +02:00
#endif
ARM: dma-mapping: provide per-cpu type map/unmap functions Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-11-26 17:19:58 +01:00
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
return 0;
}