OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-omap2/omap_hwmod_common_data.c

66 lines
1.9 KiB
C
Raw Normal View History

OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 20:05:58 +01:00
/*
* omap_hwmod common data structures
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
OMAP hwmod: add hwmod class support Add support for categorizing and iterating over hardware IP blocks by the "class" of the IP block. The class is the type of the IP block: e.g., "timer", "timer1ms", etc. Move the OCP_SYSCONFIG/SYSSTATUS data from the struct omap_hwmod into the struct omap_hwmod_class, since it's expected to stay consistent for each class. While here, fix some comments. The hwmod_class structures in this patch were designed and proposed by Benoît Cousson <b-cousson@ti.com> and were refined in a discussion between Thara Gopinath <thara@ti.com>, Kevin Hilman <khilman@deeprootsystems.com>, and myself. This patch uses WARN() lines that are longer than 80 characters, as Kevin noted a broader lkml consensus to increase greppability by keeping the messages all on one line. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-23 06:09:34 +01:00
* Benoît Cousson
*
* Copyright (C) 2010 Nokia Corporation
* Paul Walmsley
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 20:05:58 +01:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This data/structures are to be used while defining OMAP on-chip module
* data and their integration with other OMAP modules and Linux.
*/
#include <plat/omap_hwmod.h>
OMAP hwmod: add hwmod class support Add support for categorizing and iterating over hardware IP blocks by the "class" of the IP block. The class is the type of the IP block: e.g., "timer", "timer1ms", etc. Move the OCP_SYSCONFIG/SYSSTATUS data from the struct omap_hwmod into the struct omap_hwmod_class, since it's expected to stay consistent for each class. While here, fix some comments. The hwmod_class structures in this patch were designed and proposed by Benoît Cousson <b-cousson@ti.com> and were refined in a discussion between Thara Gopinath <thara@ti.com>, Kevin Hilman <khilman@deeprootsystems.com>, and myself. This patch uses WARN() lines that are longer than 80 characters, as Kevin noted a broader lkml consensus to increase greppability by keeping the messages all on one line. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-23 06:09:34 +01:00
#include "omap_hwmod_common_data.h"
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 20:05:58 +01:00
/**
* struct omap_hwmod_sysc_type1 - TYPE1 sysconfig scheme.
*
* To be used by hwmod structure to specify the sysconfig offsets
* if the device ip is compliant with the original PRCM protocol
* defined for OMAP2420.
*/
struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = {
.midle_shift = SYSC_TYPE1_MIDLEMODE_SHIFT,
.clkact_shift = SYSC_TYPE1_CLOCKACTIVITY_SHIFT,
.sidle_shift = SYSC_TYPE1_SIDLEMODE_SHIFT,
.enwkup_shift = SYSC_TYPE1_ENAWAKEUP_SHIFT,
.srst_shift = SYSC_TYPE1_SOFTRESET_SHIFT,
.autoidle_shift = SYSC_TYPE1_AUTOIDLE_SHIFT,
};
/**
* struct omap_hwmod_sysc_type2 - TYPE2 sysconfig scheme.
*
* To be used by hwmod structure to specify the sysconfig offsets if the
* device ip is compliant with the new PRCM protocol defined for new
* OMAP4 IPs.
*/
struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
.midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT,
.sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT,
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod framework The DMADISABLE bit is a semi-automatic bit present in sysconfig register of some modules. When the DMA must perform read/write accesses, the DMADISABLE bit is cleared by the hardware. But when the DMA must stop for power management, software must set the DMADISABLE bit back to 1. In cases where the ROMCODE/BOOTLOADER uses dma, the hardware clears the DMADISABLE bit (but the romcode/bootloader might not set it back to 1). In order for the kernel to start in a clean state, it is necessary for the kernel to set DMADISABLE bit back to 1 (irrespective of whether it's been set to 1 in romcode or bootloader). During _reset of the (hwmod)device, the DMADISABLE bit is set so that it does not prevent idling of the system. (NOTE: having DMADISABLE to 0, prevents the system to idle) DMADISABLE bit is present in usbotgss module of omap5. Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [paul@pwsan.com: updated to apply; fixed checkpatch warnings] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-07-04 13:09:21 +02:00
.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 20:05:58 +01:00
};
OMAP hwmod: add hwmod class support Add support for categorizing and iterating over hardware IP blocks by the "class" of the IP block. The class is the type of the IP block: e.g., "timer", "timer1ms", etc. Move the OCP_SYSCONFIG/SYSSTATUS data from the struct omap_hwmod into the struct omap_hwmod_class, since it's expected to stay consistent for each class. While here, fix some comments. The hwmod_class structures in this patch were designed and proposed by Benoît Cousson <b-cousson@ti.com> and were refined in a discussion between Thara Gopinath <thara@ti.com>, Kevin Hilman <khilman@deeprootsystems.com>, and myself. This patch uses WARN() lines that are longer than 80 characters, as Kevin noted a broader lkml consensus to increase greppability by keeping the messages all on one line. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-23 06:09:34 +01:00
ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx In case of AM33xx family of devices (like cpsw) have different sysc bit field offsets defined, sysc_type3: | 3 2 | 1 0 | | STDBYMODE | IDLEMODE | So introduce new sysc_type3 in omap_hwmod common data. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-07-04 11:40:59 +02:00
/**
* struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
* Used by some IPs on AM33xx
*/
struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = {
.midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT,
.sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT,
};
ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader Resetting DISPC when a DISPC output is enabled causes the DSS to go into an inconsistent state. Thus if the bootloader has enabled a display, the hwmod code cannot reset the DISPC module just like that, but the outputs need to be disabled first. Add function dispc_disable_outputs() which disables all active overlay manager and ensure all frame transfers are completed. Modify omap_dss_reset() to call this function and clear DSS_CONTROL, DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the DSS2 driver starts. This resolves the hang issue(caused by a L3 error during boot) seen on the beagle board C3, which has a factory bootloader that enables display. The issue is resolved with this patch. Thanks to Tomi and Sricharan for some additional testing. Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: R, Sricharan <r.sricharan@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> [paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed cpu_is_omap*() calls and converted to dev_attr] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07 02:04:08 +02:00
struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
.manager_count = 2,
.has_framedonetv_irq = 0
};