OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-omap2/cm.c

72 lines
1.6 KiB
C
Raw Normal View History

OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-03 19:14:02 +02:00
/*
* OMAP2/3 CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
OMAP clock/hwmod: fix off-by-one errors Fix loop bailout off-by-one bugs reported by Juha Leppänen <juha_motorsportcom@luukku.com>. This second version incorporates comments from Russell King <linux@arm.linux.org.uk>. A new macro, 'omap_test_timeout', has been created, with cleaner code, and existing code has been converted to use it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Juha Leppänen <juha_motorsportcom@luukku.com> Cc: Russell King <linux@arm.linux.org.uk>
2009-12-09 00:33:16 +01:00
#include <plat/common.h>
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-03 19:14:02 +02:00
#include "cm.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
#define MAX_MODULE_READY_TIME 20000
static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
/**
* omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* XXX document
*/
int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
if (cpu_is_omap24xx())
ena = idlest_shift;
else if (cpu_is_omap34xx())
ena = 0;
else
BUG();
mask = 1 << idlest_shift;
/* XXX should be OMAP2 CM */
OMAP clock/hwmod: fix off-by-one errors Fix loop bailout off-by-one bugs reported by Juha Leppänen <juha_motorsportcom@luukku.com>. This second version incorporates comments from Russell King <linux@arm.linux.org.uk>. A new macro, 'omap_test_timeout', has been created, with cleaner code, and existing code has been converted to use it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Juha Leppänen <juha_motorsportcom@luukku.com> Cc: Russell King <linux@arm.linux.org.uk>
2009-12-09 00:33:16 +01:00
omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
MAX_MODULE_READY_TIME, i);
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-03 19:14:02 +02:00
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}