linux/drivers/nfc/Makefile

#
# Makefile for nfc devices
#

obj-$(CONFIG_NFC_PN544)		+= pn544/
obj-$(CONFIG_NFC_MICROREAD)	+= microread/
obj-$(CONFIG_NFC_PN533)		+= pn533.o
obj-$(CONFIG_NFC_WILINK)	+= nfcwilink.o
obj-$(CONFIG_NFC_MEI_PHY)	+= mei_phy.o
obj-$(CONFIG_NFC_SIM)		+= nfcsim.o
obj-$(CONFIG_NFC_PORT100)	+= port100.o
obj-$(CONFIG_NFC_MRVL)		+= nfcmrvl/
obj-$(CONFIG_NFC_TRF7970A)	+= trf7970a.o

ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
NFC: Driver for NXP Semiconductors PN544 NFC chip. Creates a new "Near Field Communication" subsystem in drivers/nfc. http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;) This is a driver for the pn544 NFC device. The driver transfers ETSI messages between the device and the user space. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2011-01-13 02:00:47 +01:00			`#`
			`# Makefile for nfc devices`
			`#`

NFC: pn544: Separate the core code and the i2c one into different modules As we may need to support other physical layers, we can avoid linking the core part into each and every pn544 module. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2012-12-18 16:26:23 +01:00			`obj-$(CONFIG_NFC_PN544) += pn544/`
NFC: Initial support for Inside Secure microread Inside Secure microread is an HCI based NFC chipset. This initial support includes reader and p2p (Target and initiator) modes. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2012-12-18 14:53:53 +01:00			`obj-$(CONFIG_NFC_MICROREAD) += microread/`
NFC: pn533: add NXP pn533 nfc device driver Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2011-07-02 00:31:37 +02:00			`obj-$(CONFIG_NFC_PN533) += pn533.o`
NFC: driver for TI shared transport Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2011-09-18 10:19:36 +02:00			`obj-$(CONFIG_NFC_WILINK) += nfcwilink.o`
NFC: mei: Add a common mei bus API for NFC drivers This isolates the common code that is required to use an mei bus nfc device from an NFC HCI drivers. This prepares for future drivers for NFC chips connected behind an Intel Management Engine controller. The microread_mei HCI driver is also modified to use that common code. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2013-04-15 11:19:20 +02:00			`obj-$(CONFIG_NFC_MEI_PHY) += mei_phy.o`
NFC: Add a nfc hardware simulation driver This driver declares two virtual NFC devices supporting NFC-DEP protocol. An LLCP connection can be established between them and all packets sent from one device is sent back to the other, acting as loopback devices. Once established, the LLCP link can be disconnected by disabling the target device (with rfkill, nfctool, or neard disable-adapter test script). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2013-06-06 16:23:23 +02:00			`obj-$(CONFIG_NFC_SIM) += nfcsim.o`
NFC: Sony Port-100 Series driver This adds support for the Sony NFC USB dongle RC-S380, based on the Port-100 chip. This dongle is an analog frontend and does not implement the digital layer. This driver uses the nfc_digital module which is an implementation of the NFC Digital Protocol stack. This patch is a skeleton. It only registers the dongle against the NFC digital protocol stack. All NFC digital operation functions are stubbed out. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2013-10-04 12:12:00 +02:00			`obj-$(CONFIG_NFC_PORT100) += port100.o`
NFC: nfcmrvl: Initial commit for Marvell NFC driver This patch adds NFC support for Marvell 8897 NFC-over-USB chipset. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2014-01-06 21:58:19 +01:00			`obj-$(CONFIG_NFC_MRVL) += nfcmrvl/`
NFC: trf7970a: Add driver with ISO/IEC 14443 Type 2 Tag Support Add a driver for the Texas Instruments TRF7970a RFID/NFC/15693 transceiver. The driver currently supports ISO/IEC 14443 Type 2 tags only (MIFARE Ultralight and Ultralight C but not Classic). CC: Erick Macias <emacias@ti.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2014-03-10 19:56:22 +01:00			`obj-$(CONFIG_NFC_TRF7970A) += trf7970a.o`
NFC: add nfc subsystem core The NFC subsystem core is responsible for providing the device driver interface. It is also responsible for providing an interface to the control operations and data exchange. Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2011-07-02 00:31:33 +02:00
			`ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG`