linux/drivers/pci/Makefile

59 lines
1.4 KiB
Makefile
Raw Normal View History

#
# Makefile for the PCI bus specific drivers.
#
PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 23:28:50 +02:00
obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o
obj-$(CONFIG_PROC_FS) += proc.o
# Build PCI Express stuff if needed
obj-$(CONFIG_PCIEPORTBUS) += pcie/
obj-$(CONFIG_HOTPLUG) += hotplug.o
# Build the PCI Hotplug drivers if we were asked to
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
ifdef CONFIG_HOTPLUG_PCI
obj-y += hotplug-pci.o
endif
# Build the PCI MSI interrupt support
obj-$(CONFIG_PCI_MSI) += msi.o
# Build the Hypertransport interrupt support
obj-$(CONFIG_HT_IRQ) += htirq.o
Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 01:41:41 +02:00
# Build Intel IOMMU support
obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 01:41:41 +02:00
obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
#
# Some architectures use the generic PCI setup functions
#
obj-$(CONFIG_X86) += setup-bus.o
obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
obj-$(CONFIG_PARISC) += setup-bus.o
obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
obj-$(CONFIG_PPC32) += setup-irq.o
obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
obj-$(CONFIG_MN10300) += setup-bus.o
#
# ACPI Related PCI FW Functions
#
obj-$(CONFIG_ACPI) += pci-acpi.o
# Cardbus & CompactPCI use setup-bus
obj-$(CONFIG_HOTPLUG) += setup-bus.o
obj-$(CONFIG_PCI_SYSCALL) += syscall.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif