2010-10-28 03:43:51 +02:00
|
|
|
#ifndef SPI_ADIS16204_H_
|
|
|
|
#define SPI_ADIS16204_H_
|
|
|
|
|
|
|
|
#define ADIS16204_STARTUP_DELAY 220 /* ms */
|
|
|
|
|
|
|
|
#define ADIS16204_READ_REG(a) a
|
|
|
|
#define ADIS16204_WRITE_REG(a) ((a) | 0x80)
|
|
|
|
|
|
|
|
#define ADIS16204_FLASH_CNT 0x00 /* Flash memory write count */
|
|
|
|
#define ADIS16204_SUPPLY_OUT 0x02 /* Output, power supply */
|
|
|
|
#define ADIS16204_XACCL_OUT 0x04 /* Output, x-axis accelerometer */
|
|
|
|
#define ADIS16204_YACCL_OUT 0x06 /* Output, y-axis accelerometer */
|
|
|
|
#define ADIS16204_AUX_ADC 0x08 /* Output, auxiliary ADC input */
|
|
|
|
#define ADIS16204_TEMP_OUT 0x0A /* Output, temperature */
|
|
|
|
#define ADIS16204_X_PEAK_OUT 0x0C /* Twos complement */
|
|
|
|
#define ADIS16204_Y_PEAK_OUT 0x0E /* Twos complement */
|
|
|
|
#define ADIS16204_XACCL_NULL 0x10 /* Calibration, x-axis acceleration offset null */
|
|
|
|
#define ADIS16204_YACCL_NULL 0x12 /* Calibration, y-axis acceleration offset null */
|
|
|
|
#define ADIS16204_XACCL_SCALE 0x14 /* X-axis scale factor calibration register */
|
|
|
|
#define ADIS16204_YACCL_SCALE 0x16 /* Y-axis scale factor calibration register */
|
|
|
|
#define ADIS16204_XY_RSS_OUT 0x18 /* XY combined acceleration (RSS) */
|
|
|
|
#define ADIS16204_XY_PEAK_OUT 0x1A /* Peak, XY combined output (RSS) */
|
|
|
|
#define ADIS16204_CAP_BUF_1 0x1C /* Capture buffer output register 1 */
|
|
|
|
#define ADIS16204_CAP_BUF_2 0x1E /* Capture buffer output register 2 */
|
|
|
|
#define ADIS16204_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */
|
|
|
|
#define ADIS16204_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */
|
|
|
|
#define ADIS16204_ALM_CTRL 0x28 /* Alarm control */
|
|
|
|
#define ADIS16204_CAPT_PNTR 0x2A /* Capture register address pointer */
|
|
|
|
#define ADIS16204_AUX_DAC 0x30 /* Auxiliary DAC data */
|
|
|
|
#define ADIS16204_GPIO_CTRL 0x32 /* General-purpose digital input/output control */
|
|
|
|
#define ADIS16204_MSC_CTRL 0x34 /* Miscellaneous control */
|
|
|
|
#define ADIS16204_SMPL_PRD 0x36 /* Internal sample period (rate) control */
|
|
|
|
#define ADIS16204_AVG_CNT 0x38 /* Operation, filter configuration */
|
|
|
|
#define ADIS16204_SLP_CNT 0x3A /* Operation, sleep mode control */
|
|
|
|
#define ADIS16204_DIAG_STAT 0x3C /* Diagnostics, system status register */
|
|
|
|
#define ADIS16204_GLOB_CMD 0x3E /* Operation, system command register */
|
|
|
|
|
|
|
|
#define ADIS16204_OUTPUTS 5
|
|
|
|
|
|
|
|
/* MSC_CTRL */
|
|
|
|
#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
|
|
|
|
#define ADIS16204_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */
|
|
|
|
#define ADIS16204_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */
|
|
|
|
#define ADIS16204_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */
|
|
|
|
#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 (1 << 0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */
|
|
|
|
|
|
|
|
/* DIAG_STAT */
|
|
|
|
#define ADIS16204_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
|
|
|
|
#define ADIS16204_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
|
|
|
|
#define ADIS16204_DIAG_STAT_SELFTEST_FAIL (1<<5) /* Self-test diagnostic error flag: 1 = error condition,
|
|
|
|
0 = normal operation */
|
|
|
|
#define ADIS16204_DIAG_STAT_SPI_FAIL (1<<3) /* SPI communications failure */
|
|
|
|
#define ADIS16204_DIAG_STAT_FLASH_UPT (1<<2) /* Flash update failure */
|
|
|
|
#define ADIS16204_DIAG_STAT_POWER_HIGH (1<<1) /* Power supply above 3.625 V */
|
|
|
|
#define ADIS16204_DIAG_STAT_POWER_LOW (1<<0) /* Power supply below 2.975 V */
|
|
|
|
|
|
|
|
/* GLOB_CMD */
|
|
|
|
#define ADIS16204_GLOB_CMD_SW_RESET (1<<7)
|
|
|
|
#define ADIS16204_GLOB_CMD_CLEAR_STAT (1<<4)
|
|
|
|
#define ADIS16204_GLOB_CMD_FACTORY_CAL (1<<1)
|
|
|
|
|
|
|
|
#define ADIS16204_MAX_TX 24
|
|
|
|
#define ADIS16204_MAX_RX 24
|
|
|
|
|
|
|
|
#define ADIS16204_ERROR_ACTIVE (1<<14)
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct adis16204_state - device instance specific data
|
|
|
|
* @us: actual spi_device
|
|
|
|
* @work_trigger_to_ring: bh for triggered event handling
|
|
|
|
* @inter: used to check if new interrupt has been triggered
|
|
|
|
* @last_timestamp: passing timestamp from th to bh of interrupt handler
|
|
|
|
* @indio_dev: industrial I/O device structure
|
|
|
|
* @trig: data ready trigger registered with iio
|
|
|
|
* @tx: transmit buffer
|
2011-03-31 03:57:33 +02:00
|
|
|
* @rx: receive buffer
|
2010-10-28 03:43:51 +02:00
|
|
|
* @buf_lock: mutex to protect tx and rx
|
|
|
|
**/
|
|
|
|
struct adis16204_state {
|
|
|
|
struct spi_device *us;
|
|
|
|
struct work_struct work_trigger_to_ring;
|
|
|
|
s64 last_timestamp;
|
|
|
|
struct iio_dev *indio_dev;
|
|
|
|
struct iio_trigger *trig;
|
|
|
|
u8 *tx;
|
|
|
|
u8 *rx;
|
|
|
|
struct mutex buf_lock;
|
|
|
|
};
|
|
|
|
|
|
|
|
int adis16204_set_irq(struct device *dev, bool enable);
|
|
|
|
|
|
|
|
#ifdef CONFIG_IIO_RING_BUFFER
|
|
|
|
enum adis16204_scan {
|
|
|
|
ADIS16204_SCAN_SUPPLY,
|
|
|
|
ADIS16204_SCAN_ACC_X,
|
|
|
|
ADIS16204_SCAN_ACC_Y,
|
|
|
|
ADIS16204_SCAN_AUX_ADC,
|
|
|
|
ADIS16204_SCAN_TEMP,
|
|
|
|
};
|
|
|
|
|
|
|
|
void adis16204_remove_trigger(struct iio_dev *indio_dev);
|
|
|
|
int adis16204_probe_trigger(struct iio_dev *indio_dev);
|
|
|
|
|
|
|
|
ssize_t adis16204_read_data_from_ring(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
char *buf);
|
|
|
|
|
|
|
|
int adis16204_configure_ring(struct iio_dev *indio_dev);
|
|
|
|
void adis16204_unconfigure_ring(struct iio_dev *indio_dev);
|
|
|
|
|
|
|
|
int adis16204_initialize_ring(struct iio_ring_buffer *ring);
|
|
|
|
void adis16204_uninitialize_ring(struct iio_ring_buffer *ring);
|
|
|
|
#else /* CONFIG_IIO_RING_BUFFER */
|
|
|
|
|
|
|
|
static inline void adis16204_remove_trigger(struct iio_dev *indio_dev)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int adis16204_probe_trigger(struct iio_dev *indio_dev)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline ssize_t
|
|
|
|
adis16204_read_data_from_ring(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adis16204_configure_ring(struct iio_dev *indio_dev)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void adis16204_unconfigure_ring(struct iio_dev *indio_dev)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int adis16204_initialize_ring(struct iio_ring_buffer *ring)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void adis16204_uninitialize_ring(struct iio_ring_buffer *ring)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_IIO_RING_BUFFER */
|
|
|
|
#endif /* SPI_ADIS16204_H_ */
|