OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
34bac2ef59
linux/drivers/net/wireless/ath/Makefile

18 lines
389 B
Makefile
Raw Normal View History

atheros: put atheros wireless drivers into ath/ Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-31 04:30:33 +02:00
obj-$(CONFIG_ATH5K) += ath5k/
ath9k: move hw code to its own module hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24 05:07:00 +02:00
obj-$(CONFIG_ATH9K_HW) += ath9k/
carl9170: Makefile, Kconfig files and MAINTAINERS Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-06 01:10:25 +02:00
obj-$(CONFIG_CARL9170) += carl9170/
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-17 23:22:30 +02:00
obj-$(CONFIG_ATH6KL) += ath6kl/
ar5523: Add new driver This driver is for the AR5523 chipset from Atheros. It was created in 2007 by Christoph Hellwig but it was never finished. I found it a couple of months ago and after some polishing it's working pretty fine. The driver was written with the FreeBSD driver (uath) as reference, which was written with the reverse-engineered windows driver as reference, hence the feature set is very limited. Station mode only, no HW crypto offload. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-23 20:33:57 +02:00
obj-$(CONFIG_AR5523) += ar5523/
wireless: add new wil6210 802.11ad 60GHz driver This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-20 22:13:19 +01:00
obj-$(CONFIG_WIL6210) += wil6210/
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 19:52:10 +02:00
obj-$(CONFIG_ATH10K) += ath10k/
atheros: put atheros wireless drivers into ath/ Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-31 04:30:33 +02:00
atheros: introduce ath module containing common ath5k/ath9k/ar9170 code This change creates a new module, ath.ko, which includes code that can be shared between ath5k, ath9k and ar9170. For now, extract most of the ath9k regulatory code so it can also be used in ath5k. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-31 04:30:29 +02:00
obj-$(CONFIG_ATH_COMMON) += ath.o
atheros: define shared bssidmask setting Also make ath5k and ath9k use it, and share register definitions. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-11 02:52:45 +02:00
ath-objs := main.o \
regd.o \
ath: Copy key cache management functions from ath9k to ath Copied the key cache management functions from ath9k (common.c and hw.c) to ath/key.c so we can use them from ath5k, later. Minor changes have been made: - renamed ath9k_* to ath_* - replaced ah->caps.keycache_size with common->keymax - removed ATH9K_IS_MIC_ENABLED since it is always true. - the AR_PCU_MIC_NEW_LOC_ENA flag is replaced with (splitmic == 0). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-08 09:04:38 +02:00
hw.o \
key.o
atheros: add common debug printing ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-13 11:42:02 +02:00
ath-$(CONFIG_ATH_DEBUG) += debug.o
atheros: force endian checks on atheros wireless drivers Please NACK nasty patches. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-20 20:18:48 +01:00
ccflags-y += -D__CHECK_ENDIAN__
Reference in New Issue Copy Permalink